Increase In Flux Research Articles

Edge effects impact blue carbon dynamics across coastal ecotones in a tropical seascape

AbstractCoastal wetlands are important for their ability to regulate global climate through the sequestration and long‐term storage of carbon. Accurate quantification of ecosystem‐specific carbon dynamics (including sequestration, storage, and fluxes) is needed to develop accurate carbon budgets that inform climate change mitigation. Most work to quantify carbon dynamics either use subsampling in core habitats or benefit transfers to upscale values. While these approaches are valuable, our understanding of carbon dynamics across ecosystem transitions and overall heterogeneity remains a critical gap in coastal ecosystems as boundaries are not always clear. In this study, we established transects across both mangrove and seagrass ecotones into adjacent tidal flats in Singapore to quantifying vegetation cover, soil carbon storage, and CO2 fluxes. Vegetation cover in all transitions and soil carbon storage in most transitions followed a decreasing sigmoidal pattern from vegetated to unvegetated portions, but differed in rate and width. CO2 fluxes followed a peak distribution in mangrove–tidal flat transitions with maximum values occurring within the mangroves and were correlated with pneumatophore density, while seagrasses saw a linear increase in CO2 fluxes from the seagrass to tidal flat. Seascape analysis of soil carbon showed site‐specific impacts that resulted in differences in carbon stocks (0%–8%) as well as the width of these transitions. This study highlights the importance of understanding ecotones to better account for edge effects, which can lead to the over or under estimation of carbon, and provides a needed step in increasing the accuracy of blue carbon assessments in these critical ecosystems.

The start-up of red blood cell-like anammox granular sludge based on substrate volume flux

Enhancing substrate transfer is crucial for promoting the nitrogen removal rate of Anammox granular sludge, as the shape of the granules significantly influences substrate diffusion. In this study, inspired by biomimicry principles, we propose a novel red blood cell-like granular sludge to increase the contact area and improve substrate transfer. The startup and operation of Anammox granular sludge in low-strength ammonia nitrogen wastewater were successfully achieved through an increase in substrate volume flux (SVF). As the SVF increased from 2.38 to 7.43L²/(g VSS·h), specific Anammox activity (SAA) rose from 0.138 to 0.483gN/(g VSS·d). The Anammox granular sludge system achieved a total nitrogen removal efficiency of 85.70% and a nitrogen removal rate (NRR) of 0.792kgN/(m³·d) after 126 days. Notably, red blood cell-like granular sludge was observed by day 116. The rise in SVF induced a granule structure more conducive to substrate transport, improving the granules' efficiency in substrate uptake and thereby enhancing their SAA. High-throughput pyrosequencing revealed that the dominant bacteria using the SVF-enhancing strategy remained anaerobic ammonium oxidizing bacteria (AnAOB) (29.53%-29.89%), with an increased diversity of species, including Candidatus Kuenenia, Candidatus Anammoxoglobus, and Candidatus Brocadia.

Experimental investigations into flow boiling heat transfer in ribbed micro-channels with rectangular reentrant cavities

Reentrant cavities are fabricated at the side walls of ribs and bottom walls of grooves to enhance the flow boiling heat transfer in rectangular-ribbed micro-channels. To reveal the geometrical effect of reentrant cavities, two different reentrant cavities, i.e. RRMB-1 (ribbed micro-channel with narrow reentrant cavities) and RRMB-2 (ribbed micro-channel with wide reentrant cavities), are designed and the RM micro-channel (i.e. smooth ribbed micro-channel without reentrant cavities) is manufactured as the baseline case. The flow boiling heat transfer performance in the micro-channels is experimentally investigated at four mass fluxes and a range of heat fluxes. The flow regimes are visualized during the flow boiling process. The influences of reentrant cavities on the heat transfer coefficient, critical heat flux, pressure drop, outlet temperature fluctuation and performance evaluation criterion of three different micro-channels are analyzed and compared. The results showed that the capillary effect in the reentrant cavities results in a 19.5% increase in the heat transfer coefficient, and a 23.4% increase in the critical heat flux for the RRMB-1 at a low mass flux. The pressure drop in the RRMB-1 micro-channel is slightly higher than that in the RM micro-channel in the single-phase region, while it is opposite at the high heat flux condition. The critical heat flux in the RRMB-2 micro-channel is lower than the RRMB-1 micro-channel by 34.5%, but the pressure drop in the RRMB-2 micro-channel is higher than the RRMB-1 micro-channel by 50.3% in the two-phase region.

Magnetic Dipolarizations and Energetic Electron Flux Variations at the Nightside Geostationary Orbit

AbstractWe consider energetic electron (EE, 30–600 keV) flux variations, connected with magnetic dipolarizations, at geosynchronous orbit. Two types of these variations, due to injections and drift shell crossing (DSC), have been known since the 1960s, but no methods to separate them were suggested. To reach this goal we apply the hodogram Je(Bz) technique (EE flux vs. local magnetic field) to data of three spacecraft, GOES‐15 observing a sharp dipolarization and thus being in the injection region, and GOES‐13, GOES‐14, being inside the drifting electron cloud (DEC). Analysis of 45 sharp dipolarizations and corresponding EE flux variations in 2013–2017 showed that hodograms look quite different (a) inside and outside of the injection region and (b) for medium (30–200 keV) and high (200–600 keV) energies, allowing to identify the variation type as either DSC or true injection. EE fluxes and energy spectra were compared inside the injection region and in the DEC 4 hours eastward. EE fluxes are well correlated before the injection, but strongly scattered at its peak suggesting a highly structured drifting injected cloud. Spectra at the injection peak appeared similar, demonstrating hardening with increased geomagnetic activity. The best correlations between different injection and dipolarization measures are observed between peak Je values and ∆(MPB)1/2, where MPB is the ground mid‐latitude positive bay index; correlations of approximately 0.7 are attained inside the injection region, being lower in the DEC. The peak injected EE flux increases by ∼1–1.5 orders of magnitude with increase in dipolarization strength from low to high geomagnetic activity.

Kinetics of thermal and photoinduced diffusion of Ag into thin layers of chalcogenide glasses

This study examines the kinetics of thermal diffusion of silver in Ag-GeSe2 and Ag- As10Ge30S60 thin film structures during prolonged storage in the dark at room temperature, as well as the effects of plasmon-enhanced photostimulated diffusion of silver into As10Ge30S60 films. Ag diffraction gratings with a period of 519 nm were used to excite surface plasmon-polaritons (SPP) at the silver-chalcogenide glass interface. It was found that the thermal diffusion coefficient of silver into GeSe2 is significantly higher than into As10Ge30S60. For Ag– As10Ge30S60, photostimulated silver diffusion coefficients were measured with and without SPP excitation. SPP excitation triples the photostimulated Ag flux into As10Ge30S60. Although photosensitivity decreases over time, the plasmon-stimulated increase in Ag flux remains stable. Additionally, As10Ge30S60 thermally doped with silver shows much higher optical absorption at the probing wavelength compared to the photodoped layer with the same silver concentration. Possible mechanisms of these layers formation are discussed.

Characterizing the Broadband Reflection Spectrum of MAXI J1803-298 during Its 2021 Outburst with NuSTAR and NICER

MAXI J1803-298 is a transient black hole candidate discovered in 2021 May during an outburst that lasted several months. Multiple X-ray observations reveal recurring “dipping” intervals in several of its light curves, particularly during the hard/intermediate states, with a typical recurrence period of ∼7 hr. We report analysis of four NuSTAR observations of the source, supplemented with NICER data where available, over the duration of the outburst evolution covering the hard, intermediate, and the soft states. Reflection spectroscopy reveals the black hole to be rapidly spinning (a * = 0.990 ± 0.001) with a near edge-on viewing angle (i = 70° ± 1°). Additionally, we show that the light-curve dips are caused by photoelectric absorption from a moderately ionized absorber whose origin is not fully understood, although it is likely linked to material from the companion star impacting the outer edges of the accretion disk. We further detect absorption lines in some of the spectra, potentially associated with Fe xxv and Fe xxvi, indicative of disk winds with moderate to extreme velocities. During the intermediate state and just before transitioning into the soft state, the source showed a sudden flux increase, which we found to be dominated by soft disk photons and consistent with the filling of the inner accretion disk, at the onset of state transition. In the soft state, we show that models of disk self-irradiation provide a better fit and a preferred explanation to the broadband reflection spectrum, consistent with previous studies of other accreting sources.

Mechanism of shear-enhanced rotating-disk microfiltration for separation of microbe/protein bio-suspension

Shear-enhanced dynamic filtration is a promising approach for separating fermented biological products. In this study, we aimed to investigate the separation of bovine serum albumin (BSA) and polymethyl methacrylate (PMMA) particles in a binary suspension using rotating-disk microfiltration. Type-R and Type-RB rotating-disk configurations were designed and compared using experimental data and simulated results. The effects of operating conditions, including rotational speed and filtration pressure, on filtration flux, resistance, and protein rejection, were analyzed. Because the filter membrane rejected all the PMMA particles, the primary source of filtration resistance in the PMMA/BSA suspension was the fouling cake. Although BSA rejection increased with higher filtration pressure, it decreased as the rotational speed increased. Computational fluid dynamics simulations were used to model the flow velocity and shear stress distributions within the rotating-disk dynamic microfiltration system. The results showed that Type-RB achieved a 55 % increase in flux compared to Type-R, owing to a significant reduction in cake resistance by approximately 46 %. A proportional relationship between the mean cake mass and the ratio of qs/τw under varying operating conditions was established using a force balance model. These findings suggest that elevated shear stress significantly enhances filtration performance, with Type-RB demonstrating superior effectiveness for bio-suspension separation.

Heat propagation phenomenon of compressed natural gas /air premixed laminar flame impinging on a flat surface

In this paper the heat transfer characteristics have been determined theoretically using heat propagation phenomena of compressed natural gas (CNG)/air premixed laminar flames impinging on flat surfaces. Effects of varied equivalence ratios (Ф), Reynolds numbers (Re), separation distances (H/d) and burner diameters (d) on stagnation point heat flux have been investigated. The simulation findings were validated with the available experimental data. The flat plate with the maximum heat flux at the stagnation position is located close to the margin of the innermost premixed reaction zone (i.e., at H/d, Re and d are 5, 1000, 8 mm). The flow of heat steadily decreases in axial direction as the separating distance from the inner reaction zone's tip increases. Greater separation lengths at the stagnation region cause a subsequent increase in heat flux. The objective of this investigation is to get an idea about the impact of existence of the plate on the flame and temperature distribution and to get clarity about the reason behind higher amount of heat flux owing to tip of the innermost reaction area at stagnation region.

Enhanced photocatalytic and filtration properties of carbon-doped g-C3N4 membranes reinforced with nanofibrillated cellulose

Carbon-doped g-C3N4 was synthesized using a simple high-temperature process (calcination at 550 °C for 4 h). One-dimensional nanofibrillated cellulose (NFC) materials were then inserted into the two-dimensional g-C3N4 material by vacuum filtration method at room temperature. The prepared g-C3N4/NFC composite membranes were systematically characterized using a series of techniques, such as XRD, FTIR, and SEM. The results showed that the carbon-doped photocatalysts possessed a narrow band gap, which prolonged the visible light absorption and favored the organic pollutant degradation. The incorporation of NFC enlarged the interlayer spacing, leading to an increase in the water flux. The water flux of C0.02CN/NFC (15%) composite membranes reached 73.7 L•m-2•h-1•bar-1, which is more than that of g-C3N4/NFC membrane. At the same time, the carbon doped composite membranes showed enhanced retention and photocatalytic degradation ability. The retention rate of the C0.02CN/NFC (5%) composite membranes could reach 89.3% from 80.8% after three-cycle photocatalytic experiments. The membrane maintained a good retention rate and feed flux, which confirms the composite membrane has good self-cleaning ability and stability. It could potentially be applied for water treatment.

Experimental and numerical studies on enhanced flow boiling in tube with superwetting micro-finned surfaces

Due to the high latent heat from evaporation, flow boiling has been applied in a variety of industrial applications. However, the occurrence of “annular bubble” will dramatically increase the thermal resistance near the wall, causing decreases both in heat transfer coefficient (HTC) and critical heat flux (CHF). To tackle this issue, we propose the micro-finned surfaces with strong capillary force to enhance the heat transfer coefficient and critical heat flux for flow boiling. With deionized water as the coolant, we investigate the effects of fin width, fin height, fin pitch, coolant flow rate and heat flux on flow boiling through experiment and numerical simulation. The results show that the wider the fin width, the lower the fin height, and the smaller the fin pitch, the higher the convective heat transfer coefficient. In addition, the higher the coolant flow rate leads to higher heat transfer coefficient and lower flow boiling instability. When the heat flux increases, the convective heat transfer coefficient and flow instability increase. Among them, the microchannel with fin width of 20 μm, fin height 40 μm, and fin pitch 40 μm obtains the maximum convective heat transfer coefficient, 59.3 % higher than that of the smooth microchannel.

An enhanced heat transfer method based on the electrocapillary effect of gallium-based liquid metal.

As electronic products become smaller and more powerful, there is an increasing need for effective heat dissipation. An effective heat exchange method is necessary for the equipment to function reliably in a compact space. To tackle the limitations of current microfluidic cooling technology, including difficulty in manufacturing, maintenance, and cost reduction, a heat exchange method with a simple system is proposed in this work. This method is based on the electrocapillary effect, using eutectic gallium-indium alloy droplets with high thermal conductivity, surface tension, and controllability as the basic unit. An electric field is applied to generate unevenly distributed charges in the electric double layer on the droplet surface, thereby creating a surface tension gradient that can drive the surrounding solution to flow. Simultaneously, the oscillation of the droplet can also intensify the disturbance of the solution. The violent disturbance of the solution causes the heat transfer mode to change from conduction to convective heat transfer and greatly reduces the thermal resistance, resulting in a substantial increase in heat flux. For this heat transfer method, the temperature distribution and flow characteristics of the solution in low-frequency oscillating and direct-current-biased alternating current electric fields are studied, and the effect of voltage, frequency, and the number of droplets on heat transfer enhancement is clarified. Compared with conduction without internal disturbance, the heat flux can be increased by up to 110% based on the combined effect of two droplets. This work provides a solution for enhancing the heat transfer of microfluidics.

Experimental investigation on the influence of lubricant oil on CO2 nucleate pool boiling heat transfer characteristics

As a natural working fluid, CO2 is considered the most promising alternative refrigerant to hydrofluorocarbons. In the fields of automotive air conditioning and commercial heat pumps, transcritical CO2 cycles show significant potential for performance enhancement. Although there are many studies on CO2 flow boiling in the open literature, few studies involve CO2 nucleate boiling heat transfer, which is the dominant mechanism of CO2 flow boiling heat transfer process. This study is proposed to conduct experimental investigations of CO2 nucleate boiling heat transfer. The influences of evaporation temperature, heat flux and lubricant oil addition on boiling heat transfer performance and bubble dynamic characteristics are discussed. The results show that in pure CO2 nucleate boiling, heat flux increase leads to higher bubble density and bubble diameter in bulk liquid, which in turn enhances boiling heat transfer. The effect of evaporation temperature increases on bubble diameter is significant. The reduction in bubble diameter weakens the convective heat transfer caused by bubble motion, which leads to less variation in the CO2 nucleate boiling heat transfer coefficient with evaporation temperature. Lubricant oil addition significantly changes the bubble dynamics of CO2 nucleate boiling process, leading to larger bubble density and smaller bubble diameter. Moreover, the oil diffusion at the phase interface notably affects the heat transfer performance, resulting in greater differences in the boiling heat transfer characteristics of the mixtures compared to that of pure CO2. The mixture boiling heat transfer coefficient is collectively influenced by evaporation temperature, heat flux and oil concentration. The experimental results suggest that the heat transfer coefficient of the mixture with an oil concentration of 0.5 % increases by an average of 25 % compared to pure CO2 at an evaporation temperature of 0 °C. At higher evaporation temperatures and high oil concentrations (>1%), oil addition leads to heat transfer deterioration. Findings from this work can provide a better understanding of oil effect on refrigerant boiling heat transfer and a fundamental basis for heat exchanger design of CO2 systems.

Insight Into the Role of Fiber Diameter on Electrospun Polysulfone Mats

ABSTRACTFiber electrospun mats created using cylindrical collectors have been extensively studied as effective membranes for water treatment. However, the relationships between the properties of electrospun mats and the characteristics and performance of membranes are not well‐established. This research examined two samples with average fiber diameters of 1.8 ± 0.49 μm and 0.47 ± 0.26 μm, which were evaluated as supporting substrates for the separation of MgSO4 ions. The variation in fiber diameter resulted from consistent conditions of voltage, distance, and collector rotation speed, while the injection rates were different, set at 2 mL/h and 0.8 mL/h, respectively. The resulting thin‐film composite (TFC) membrane consists of three layers: the first layer is a mesh polyester that underlies a middle hydrophobic electrospun support layer made from a 20 wt.% polysulfone solution. The third layer is a polyamide layer created through interfacial polymerization, involving a reaction between piperazine (PIP) monomers at a concentration of 2% by weight and trimesoyl chloride (TMC) monomers at a concentration of 0.2% by weight. Due to its hydrophobic nature, PSU repels water monomers from its surface during polymerization. Consequently, surface modification using plasma treatment alters the surface characteristics from hydrophobic to hydrophilic, resulting in the formation of a superior polyamide layer. The results indicate that membranes with larger fiber diameters exhibit a rougher texture. Additionally, the increased void space between the fibers in these membranes leads to an increase in pure water flux that is 92% higher compared to membrane samples with smaller fiber diameters; this higher flux is due to larger pore size. Furthermore, membranes with smaller fiber diameters possess a finer pore structure, resulting in a polyamide layer with fewer defects than membranes with larger fibers. This improved structure achieved a separation efficiency of 68% ± 1.02% for MgSO4, while the membrane with an average fiber diameter of 1.80 ± 0.49 μm demonstrated a separation rate of 20% ± 2.26%. These findings provide a step forward in the development of a theoretical framework for engineering TFC membranes with electrospun mats as supports.

A study of H2O opposite-direction permeation through a mixed ceramic-molten salt CO2 separation membrane

Ceramic-molten salt dual-phase CO2-permselective membrane is a promising technology to capture CO2 at high temperatures. The formation of hydroxide (OH−) phase in molten carbonate (CO32−) in the presence of steam leads to an increase in CO2 permeation flux. However, few works have paid attention to the H2O permeability. In this study, we find that there are two routes for H2O permeation through the molten hydroxide-based dual-phase membrane with a wet sweep gas; one route is permeated with CO2, but in the opposite direction; the other is a separate route for H2O permeation through the interaction of oxygen ions and hydroxide ions. The resulting H2O fluxes are 5.3 and 1.7 times the fluxes of CO2 at 600 and 800 °C, respectively. Stable CO2 and H2O fluxes are obtained over 100 h at 700 °C, making the dual-phase membrane promising for coupling CO2 capture with conversion processes.

Optimization of Thermal Management for the Environmental Worthiness Design of Aviation Equipment Using Phase Change Materials

A phase change materials (PCM)-based heat sink is an effective way to cool intermittent high-power electronic devices in aerospace applications such as airborne electronics and aircraft external carry. Optimizing the heat sink is significant in designing a compact and efficient system. This paper proposes an optimization procedure for the PCM/expanded graphite (EG)-based heat sink to minimize the temperature of the heat source. The numerical model is built to estimate the thermal response, and a surrogate model is fitted using the Kriging model. An optimization algorithm is constructed to predict the optimum parameters of the heat sink, and the effects of heat sink volume, heat flux, and working time on the optimal parameters of the heat sink are investigated. This shows that the numerical results agree well with the experimental data, and the proposed optimization method effectively obtains the optimal EG mass fraction and the geometric dimensions of the PCM enclosure. The optimal EG mass fraction increases with the rise in heat sink volume and decreases with the increase in heat flux and working time. The optimal ratio of the height to the length of the heat sink is 0.43. This study provides practical guidance for the optimal design of a PCM/EG-based heat sink.

Enhancing tip vortices to improve the lift production through shear layers in flapping-wing flow control

Flow control of a low-aspect-ratio flat-plate heaving wing at an average angle of attack of $10^{\circ }$ by a steady-blowing jet is numerically studied by using a feedback immersed boundary–lattice Boltzmann method. Blowing jets at the leading edge, mid-chord and trailing edge are considered. The wing enjoys the highest lift production with the trailing-edge downstream blowing jet, which improves the average lift by 50.0 % at $Re = 1000$ and 22.9 % at $Re = 5000$ through the enhancement of the tip vortex circulation caused by the increase in the mass flux of the shear layer at the wing tips. This increase in mass flux decreases as $Re$ increases from 1000 to 5000 due to its self-limiting mechanism. A mid-chord vertical blowing jet induces a middle vortex which enhances the lift production but the enhancement is smaller than that of trailing-edge downstream blowing jet. Other jet arrangements do not significantly increase the lift coefficient, but the mid-chord upstream blowing jet experiences a significant reduction in the drag coefficient, leading to an increase of 50.6 % in the average lift-to-drag ratio. The effectiveness of the flow control is not significantly affected by the aspect ratio.

Numerical Study of Complex Heat Transfer and Aerodynamics in a Tube Furnace with a Flat Fuel Combustion Mode

The object of the study is a tubular furnace for steam reforming of natural gas. The channel walls are formed by a refractory lining and a tubular screen with a known temperature. The chamber volume is filled with a selectively radiating, absorbing and weakly scattering medium of gaseous fuel combustion products. The research method is based on the numerical solution of a system of two-dimensional integro-differential equations of radiative gas dynamics, closed by a two-parameter model of turbulent convection. It is shown that when burners are located on the side walls of the radiation chamber, a significant restructuring of the heat flux distribution occurs. A decrease in the chamber width is accompanied by an increase in both radiant and convective heat fluxes to the tubular screen.

Numerical Study on Composite Multilayer Insulation Material for Liquid Hydrogen Storage

This study investigated the heat transfer characteristics of composite multilayer insulation (MLI) materials used for the storage and transport of liquid hydrogen at cryogenic temperatures. This research focused on analyzing the effects of thermal boundary temperature, total layer count, and vacuum level on the heat flux through the insulation material. Based on the layer-by-layer model, a heat transfer model of composite MLI was constructed. This research introduces a novel method for analyzing the heat transfer properties of composite MLI in the liquid hydrogen temperature range. Results indicate that heat flux increases with higher thermal boundary temperatures, with the MLI layers near the cold boundary playing a critical role in overall insulation performance. Additionally, numerical analysis was conducted to examine the impact of different material combinations and variations in vacuum level on heat transfer characteristics. Findings reveal that adding spray-on foam insulation reduces heat flux by 20.76% compared to using MLI alone. Furthermore, increasing the total number of MLI layers effectively mitigates heat flux increase, achieving an optimal heat flux of 0.5377 W/m2 with a total of 50 layers.

Immunometabolic Effect of Nitric Oxide on Human Macrophages Challenged With the SARS-CoV2-Induced Cytokine Storm. A Fluxomic Approach.

The cytokine storm associated with SARS-CoV-2 infection is one of the most distinctive pathological signatures in COVID-19 patients. Macrophages respond to this pro-inflammatory challenge by reprogramming their functional and metabolic phenotypes. Interestingly, human macrophages fail to express the inducible form of the NO synthase (NOS2) in response to pro-inflammatory activation and, therefore, NO is not synthesized by these cells. The contribution of exogenously added NO, via a chemical NO-donor, on the immunometabolic changes associated with the cytokine storm is investigated. By using metabolic, transcriptomic, and functional assays the effect of NO in human macrophages is evaluated and found specific responses. Moreover, through integrative fluxomic analysis, pathways modified by NO that contribute to the expression of a particular phenotype in human macrophages are identified, which includes a decrease in mitochondrial respiration and TCA with a slight increase in the glycolytic flux. A significant ROS increase and preserved cell viability are observed in the presence of NO, which may ease the inflammatory response and host defense. Also, NO reverses the cytokine storm-induced itaconate accumulation. These changes offer additional clues to understanding the potential crosstalk between NO and the COVID-19 cytokine storm-dependent signaling pathways.

Improvement of superconducting, morphological, and flux pinning ability of YBa2Cu3O7−y matrix with oxygen and Mn2O3 impurity

Abstract In the current work, the influence of oxygen and Mn2O3 impurity levels intervals 0.00 ≤ x ≤ 0.30 on various key properties such as electrical resistivity, superconducting, flux pinning ability, stabilization of ceramic system, and morphological properties of YBa2Cu3O7-y (Y-123) superconductor were examined by electrical resistivity, critical current density, and scanning electron microscopy (SEM), electron dispersive x-ray (EDX) measurements. The EDX test results indicated that all the Y-123 ceramics produced possessed different composition distributions on the sample surface. SEM photomicrographs also confirmed the improvement in the appearance of surface morphology and crystallinity quality of the YBa2Cu3O7-y system. Moreover, the development in the interaction quality between grains, pinning ability and strength quality of 2D coupled vortices was obtained with the oxygen ambient and optimum manganese impurity addition highly dispersing throughout the intra grain and inter-grain boundary couplings due to the increase in the artificial flux pinning nucleation sites in the Y-123 system. Thus, the best sample with the highest Jc value of 98 A/cm2 showed the most resistance to the applied magnetic field and current. Similarly, the same sample exhibited the greatest superconductive offset (98.320 K) and onset (100.504 K) temperatures values based on the development of the Cu-O coordination and stability of the crystal structure. In conclusion, this comprehensive study based on the analysis of oxygen and Mn2O3 impurity addition mechanism through the YBa2Cu3O7-y ceramic matrix may open a new and applicable field for advanced engineering, heavy industry technology and large-scale applications.