Increasing Solvent Polarity Research Articles

Symmetry-breaking charge separation in a null-excitonic 3-dimensional rigid nonconjugated trimer.

Photoinduced symmetry-breaking charge separation (SB-CS) has been extensively observed in various oligomers and aggregates, which holds great potential for robust artificial solar energy conversion systems. It attaches great importance to the precise manipulation of interchromophore electronic coupling in realizing efficient SB-CS. The emerging studies on SB-CS suggested that it could be realized in null-excitonic aggregates, and a long-lived SB-CS state was observed, which offers an advanced platform and has gathered immense attention in the SB-CS field. Here, we unveiled the null-exciton coupling induced ultrafast SB-CS in a rigid polycyclic aromatic hydrocarbon framework, triperyleno[3,3,3]propellane triimides (TPPTI), in which three chromophores were attached through a nonconjugated bridge. Through a combination of theoretical calculations and steady-state absorption results, we demonstrated that this nonconjugated TPPTI possesses negligible exciton coupling. Increased solvent polarity was found to significantly enhance state mixing between local excited and charge transfer states. Using transient absorption spectroscopy, ultrafast SB-CS was observed in highly polar dimethylformamide, facilitated by a selective hole-transfer coupling and a favorable charge separation free energy (ΔGCS). Additionally, the rate ratio between SB-CS and charge recombination was at least high to 1800 in dimethylformamide. This investigation provides profound insights into the role of null-exciton coupling in dominating ultrafast SB-CS in multichromophoric systems.

Evaluation of bacteriostatic and antioxidant activities of various extracts from aerial part of Piper nigrum grown in Gulf countries traditionally used for the treatment of various infectious diseases

AbstractPiper nigrum (P. nigrum) is a tropical medicinal plant widely available in Southeast Asian countries including Oman. In Asian It has a long history of usage in places such as Oman for treating of rheumatism, colds, and various infections. Based on the medicinal uses, the purpose of this research is to create diverse fractions using increasing solvent polarity from the aerial part of the collected plant species and evaluate their antibacterial and antioxidant activities by using established bioassays. The aerial part was collected from the Southern part of Oman and processed using the standard method. The processed materials were recovered using the maceration method using methanol, and the methanol raw extracts was further fractionated with water extraction, butanol, ethyl acetate (ETA), hexane, and dichloromethane are produced using different liquid polarities. Each of the six plant extracts was tested for antioxidant and antibacterial potential at different concentrations against DPPH (1, 1-diphenyl-2-picrylhydrazyl) and agar diffusion methods. All of the fractions at varied concentrations shown promising antioxidant activity with DPPH against the gallic acid. The maximum activity was observed in hexane extract, while the smallest potential was noticed in butanol extract, in the following order: hexane > chloroform > water > methanol > ethyl acetate > butanol extract. The antibacterial efficacy of six different polarities extracts gives moderate activity against two Gram-positive bacteria strains namely S. saprophyticus and S. aureus and three Gram-negative namely P. vulgaris, K. senegalensis and E. coli. Among the six extracts, hexane extract had the most antibacterial activity, whereas butanol extract had the smallest activity. The remaining four extracts, chloroform, ethyl acetate, methanol, and water, all had comparable activity. In conclusion, the extracts with the greatest activity from the chosen plant types might be employed as natural antioxidants to treat infectious disorders.

The Stability of Hydrogen‐Bonded Ion‐Pair Complex Unexpectedly Increases with Increasing Solvent Polarity

AbstractThe generally observed decrease of the electrostatic energy in the complex with increasing solvent polarity has led to the assumption that the stability of the complexes with ion‐pair hydrogen bonds decreases with increasing solvent polarity. Besides, the smaller solvent‐accessible surface area (SASA) of the complex in comparison with the isolated subsystems results in a smaller solvation energy of the latter, leading to a destabilization of the complex in the solvent compared to the gas phase. In our study, which combines Nuclear Magnetic Resonance, Infrared Spectroscopy experiments, quantum chemical calculations, and molecular dynamics (MD) simulations, we question the general validity of this statement. We demonstrate that the binding free energy of the ion‐pair hydrogen‐bonded complex between 2‐fluoropropionic acid and n‐butylamine (CH3CHFCOO−…NH3But+) increases with increased solvent polarity. This phenomenon is rationalized by a substantial charge transfer between the subsystems that constitute the ion‐pair hydrogen‐bonded complex. This unexpected finding introduces a new perspective to our understanding of solvation dynamics, emphasizing the interplay between solvent polarity and molecular stability within hydrogen‐bonded systems.

The Stability of Hydrogen-Bonded Ion-Pair Complex Unexpectedly Increases with Increasing Solvent Polarity.

The generally observed decrease of the electrostatic energy in the complex with increasing solvent polarity has led to the assumption that the stability of the complexes with ion-pair hydrogen bonds decreases with increasing solvent polarity. Besides, the smaller solvent-accessible surface area (SASA) of the complex in comparison with the isolated subsystems results in a smaller solvation energy of the latter, leading to a destabilization of the complex in the solvent compared to the gas phase. In our study, which combines Nuclear Magnetic Resonance, Infrared Spectroscopy experiments, quantum chemical calculations, and molecular dynamics (MD) simulations, we question the general validity of this statement. We demonstrate that the binding free energy of the ion-pair hydrogen-bonded complex between 2-fluoropropionic acid and n-butylamine (CH3CHFCOO-…NH3But+) increases with increased solvent polarity. This phenomenon is rationalized by a substantial charge transfer between the subsystems that constitute the ion-pair hydrogen-bonded complex. This unexpected finding introduces a new perspective to our understanding of solvation dynamics, emphasizing the interplay between solvent polarity and molecular stability within hydrogen-bonded systems.

Biisoindolylidene solvatochromic fluorophores: Synthesis and photophysical properties

Environment-sensitive fluorescent probes are commonly utilized in various fields, including fluorescence sensing and imaging. This paper describes the synthesis and photophysical properties of a novel class of solvatochromic fluorophores that incorporate biisoindolylidene as the core backbone. This study investigates the structure-property relationships of these newly developed fluorophores. The central biisoindolylidene acts as an efficient electron acceptor, and by modifying the aryl ring substituent at the 3,3′ position, the photophysical properties of the fluorophores can be significantly enhanced, particularly in terms of photoluminescence quantum efficiency. Furthermore, when an electron-donor group replaces the aryl ring at the 3,3′ position, intriguing solvatochromic behavior is observed. This leads to a red-shift in the maximum emission wavelength and an increase in the Stokes shift with increasing solvent polarity. In solvent dimethyl sulfoxide (DMSO), the maximum emission wavelength can reach up to 750 nm, with a Stokes shift of approximately 150 nm. Finally, the potential application of the fluorophore in the detection of volatile acids is explored in a preliminary manner.

Minimal Coarse-Grained Models of Polar Solvent for Electrolytes: Stockmayer Versus Dumbbell.

This study explores the potential of the dumbbell solvent as a minimal model for understanding electrolyte solutions in polar solvents. Our investigation involves a comparative analysis of the dumbbell model and the Stockmayer model, focusing on ion solvation and ion-ion correlations. We examine electrolytes containing symmetric monovalent salts dissolved in polar solvents while varying the ion density and solvent polarity. Both models predict an augmented solvent coordination number around ions as the solvent polarity increases, with the dumbbell solvent displaying a more pronounced effect. Notably, radial distribution functions (RDFs) between solvent and ions yield differing trends; Stockmayer models exhibit a nonmonotonic relationship due to strong dipole-dipole interactions at higher polarity, while RDFs for ions and dumbbell solvents consistently rise. In response to increased solvent polarity, Stockmayer solvents within the ion's solvation shell undergo continuous dipole orientation shifts, whereas the dumbbell solvent predominantly adopts pointing-away dipole orientations, diminishing pointing-to orientations. This underscores the significance of the interplay between the solvent molecular orientation and dipole rotation. Both models qualitatively predict ion pairing and clustering behaviors across varying solvent dipole strengths and salt concentrations. The Stockmayer solvent generally provides stronger electrostatic screening than the dumbbell solvent due to its neglect of the coupling between molecular orientation and dipole rotation. What's more, at a high dipole moment regime, ion-ion correlations in Stockmayer solvent can become stronger with increasing dipole moment due to stronger solvent-solvent correlations. This study underscores the effectiveness of the dumbbell solvent model in systematically elucidating the fundamental principles governing electrolytes and offers potential applications in the rational design of electrolyte systems.

Multi-functional ratiometric detection based on dual-emitting N-doped carbon dots

Ratiometric fluorescence probes based on multi-emission carbon dots improve accuracy and sensitivity on detecting various environment issues. Herein, a novel dual-emitting N-doped carbon dots (N-CDs) was synthesized from citric acid and urea via a solvothermal method in N,N-dimethylformamide (DMF). The blue and orange emissions of N-CDs in water were modulated, and pure white light-emitting with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.33) was achieved. The two PL centers behaved differently for Fe3+, Cu2+ and Ag+ ions, with the limit of detection (LOD) of ppm as fluorescence probes. Additionally, N-CDs displayed unique solvatochromism phenomenon. A new green emission appeared in organic solvents and gradually quenched with the increase of solvent polarity. The ratiometric PL displayed an excellent linear response for detecting water, and the LOD was between 0.003 % and 0.3 % in DMF, ethanol, isopropanol and N-methylpyrrolidone. Furthermore, N-CDs exhibited pH-sensitive response in the range of 4.0–7.0 and temperature-dependent response during heating–cooling cycles between 15 and 70 °C. A simple, efficient and reliable multi-functional ratiometric probe for detecting metal ions, water content, pH and temperature simultaneously was realized. However, there is a need for future application research to overcome the limitation imposed by the excitation wavelength of 330 nm.

Exploring helix structures of γ-peptides based on 2-(aminomethyl)cyclopentanecarboxylic acid.

Conformational search and density functional theory calculations were performed to explore the preferences of helical structures for chiro-specific oligo-γ-peptides of 2-(aminomethyl)cyclopentanecarboxylic acid (γAmc5) with a cyclopentyl constraint on the Cα-Cβ bond in solution. The dimer and tetramer of γAmc5 (1) with homochiral (1S, 2S) configurations exhibited a strong preference for the 9-membered helix foldamer in solution, except for the tetramer in water. However, the oligomers of γAmc5 (1) longer than tetramer preferentially adopted a right-handed (P)-2.614-helix (H1-14) as the peptide sequence becomes longer and as solvent polarity increases. The high stabilities for H1-14 foldamers of γAmc5 (1) in solution were ascribed to the favored solvation free energies. The calculated mean backbone torsion angles for H1-14 helix foldamers of γAmc5 (1) were similar to those calculated for oligomers of other γ-residues with cyclopentane or cyclohexane rings. However, the substitution of cyclopentane constraints on the Cα-Cβ bond of the γAmc5 (1) residue resulted in different conformational preferences and/or handedness of helix foldamers. In particular, the pyrrolidine-substituted analogs of the H1-14 foldamers of γAmc5 (1) with adjacent amine diads substituted at a proximal distance are expected to be potential catalysts for the crossed aldol condensation in nonpolar and polar solvents.

Dansylated Nitrile N-Oxide as the Fluorescent Dye Clickable to Unsaturated Bonds without Catalyst.

Fluorescent polymeric materials have been exploited in the fields of aesthetical purposes, biomedical engineering, and three-dimensional printing applications. While the fluorescent materials are prepared by the polymerization of fluorescent monomer or the blending a fluorescent dye with common polymer, the covalent immobilization of fluorescent dye onto common polymers is not the practical technique. In this paper, dansylated nitrile N-oxide (Dansyl-NO) has been designed and synthesized to be a stable nitrile N-oxide as the derivative of 2-hydroxy-1-naphthaldehyde. While Dansyl-NO shows good reactivity to an alkene and an alkyne to give fluorescent Dansyl-Ene and Dansyl-Yne, respectively, it hardly reacts to a nitrile. The results indicate that Dansyl-NO serves as a fluorescent dye clickable to alkenes and alkynes. To know the effects of solvent on the fluorescent properties, the UV-vis and fluorescence spectra of Dansyl-Ene are measured in three solvents. Dansyl-Ene shows fluorescent solvatochromism, which appears to be red-shifted along with the increase in solvent polarity. Poly(styrene-co-butadiene) directly reacts with Dansyl-NO to give fluorescent modified SB. The emission spectrum of modified SB is blue-shifted compared with that of Dansyl-Ene. The blue-shift could be possibly attributed to the presence of less polar polymer skeleton around the dansyl moieties of modified SB.

Fluorescent Sensor Based on 1H-Pyrazolo[3,4-b]quinoline Derivative for Detecting Zn2+ Cations.

The photophysical and sensory properties of the donor-acceptor pyrazoloquinoline derivative (PQPc) were investigated using absorption, steady-state, and time-resolved fluorescence measurements. The compound synthesized from commercial, readily available substrates exhibited absorptions in the UV-Vis range, with a maximum of the longwave band around 390 nm. The maximum fluorescence was around 460-480 nm, depending on the solvent. The quantum yield was between 12.87% (for n-hexane) and 0.75% (for acetonitrile) and decreased with increasing solvent polarity. The PET mechanism was implicated as the cause of fluorescence quenching. Divalent ions such as Zn2+, Pb2+, Cd2+, Ca2+, Mg2+, Co2+, Ni2+, and Cu2+ were introduced to study the fluorescent response of PQPc. A 13-times increase in fluorescence quantum yield was observed after the addition of Zn2+ ions. Detailed research was carried out for the PQPc-Zn2+ system in order to check the possibility of analytical applications of PQPc as a fluorescent sensor. A detection limit of Zn2+ was set at the value level 1.93 × 10-7 M. PQPc-Zn2+ complexes had a stoichiometry of 1:1 with a binding constant of 859 M-1. Biological studies showed that the sensor was localized in cells near the membrane and cytoplasm and may be used to detect zinc ions in eukaryotic cells.

Solvent Polarity/Polarizability Parameters: A Study of Catalan’s SPPN, Using Computationally Derived Molecular Properties, and Comparison with π* and ET(30)

Catalan’s SPPN, a measure of solvent polarity/polarizability has been analysed in terms of molecular properties derived from computational chemistry. The results show that SPPN correlates positively with the molecular dipole moment and quadrupolar amplitude and negatively with the molecular polarizability. These correlations are shared with Kamet and Taft’s π* and Reichardt and Dimroth’s ET(30). Thus, one can associate the solvent polarity with non-specific interactions involving the permanent charges on solvent molecules. It is also noted that the opposite correlations, all three parameters increasing with increasing solvent polarity but decreasing with increasing solvent polarizability, creates an ambiguity in their use, for example, in linear free energy relationships.

Solvent-Dependent Folding Behavior of a Helix-Forming Aryl-Triazole Foldamer.

Aromatic foldamers make up a novel class of bioinspired molecules that display helical conformations and have functions that rely on control over their coil-helix folding preferences. While the folding has been extensively examined by experiment, it has rarely been paired with the types of atomic level insights offered by theory. We present the results of all-atom molecular dynamics (MD) simulations to examine the role of solvent polarity on driving the helical folding behavior of the aryl-triazole foldamer. The temperature-dependent enhanced sampling technique, replica-exchange MD simulations, was employed to understand the folding phenomena. The simulation results show that in a low polarity solvent (dichloromethane), the foldamer prefers to stay in the unfolded state. The unfolded state has four dipolar triazoles (5 D) in their favored all-anti geometries and favoring anti-parallel geometries. However, an increase in solvent polarity using acetonitrile resulted in solvophobic collapse, yielding the helically folded form as the predominant state. The folded helix has an all-syn geometry, with triazoles in parallel arrangements. Intermediate conformations with a mixture of syn and anti arrangements of the triazoles are of lower abundance in both the DCM and MeCN solvents. The chiral handedness of the helix observed experimentally is assigned as left-handed by correlation with computed electronic circular dichroism spectra using time-dependent density functional theory.

AIE‐Active Ferrocene Appended Linear (D‐π‐A) Aromatic Ester Chromophores: Structural, Theoretical and Effect on Phenyl Ring on Luminescence and Nonlinear Optical Properties

AbstractIn the present research, a new ferrocene‐appended linear donor‐π‐acceptor (D‐π‐A) ester chromophore Fc‐(C6H4)2‐COOC2H5 (2) was synthesized and characterized using various spectroscopic techniques. The molecular structure of chromophore 2 was determined using single‐crystal X‐ray diffraction analysis, revealing its crystallization in the monoclinic crystal system with the P21/n space group. The chromophore Fc‐C6H4‐COOC2H4 (1) was utilized to compare its photophysical and nonlinear optical characteristics with those of 2. Cyclic voltammetry revealed a single‐electron transfer mechanism from Fe2+↔Fe3+. The emission solvatochromism studies show a polarized excited state in response to increasing solvent polarity, indicating charge transfer processes. Interestingly, in mixed aqueous media (THF/H2O), the chromophores exhibit intensified fluorescence due to restricted intra‐molecular rotation (RIR), despite weak emission in THF solvent. Chromophore 2 demonstrated 1.5 times higher second harmonic generation (SHG) efficiency than 1, attributed to its extended π‐conjugation from an additional phenyl ring and reduced antiparallel alignments. Despite its centrosymmetric crystal packing, chromophore 2 exhibited SHG efficiency due to non‐covalent interactions (C−H⋅⋅⋅π) in the crystal lattice. Density Functional Theory (DFT) calculations, employing various functionals, provided insights into dipole moment and first hyperpolarizability, with B3LYP‐hybrid functional underestimating hyperpolarizability values owing to long‐range charge transfer interactions within the D‐π‐A systems, aligning closely with experimental findings.

A Rational Design of Electrochemically and Photophysically Tunable Triarylamine Luminophores by Consecutive (Pseudo-)Four-Component Syntheses.

The concatenation of Suzuki coupling and two-fold Buchwald-Hartwig amination in sequentially palladium-catalyzed consecutive multicomponent syntheses paves a concise, convergent route to diversely functionalized para-biaryl-substituted triarylamines (p-bTAAs) from simple, readily available starting materials. An extensive library of p-bTAAs permits comprehensive investigations of their electronic properties by absorption and emission spectroscopy, cyclic voltammetry, and quantum chemical calculations, which contribute to a deep understanding of their electronic structure. The synthesized p-bTAAs exhibit tunable fluorescence from blue to yellow upon photonic excitation with quantum yields up to 98 % in solution and 92 % in the solid state. Furthermore, a pronounced bathochromic shift of the emission maxima by increasing solvent polarity indicates positive emission solvatochromism. Aggregation-induced enhanced emission (AIEE) in dimethyl sulfoxide (DMSO)/water mixtures causes the formation of intensely blue fluorescent aggregates. Cyclic voltammetry shows reversible first and second oxidations of p-bTAAs at low potentials, which are tunable by variation of the introduced para substituents. 3D Hammett plots resulting from the correlation of oxidation potentials and emission maxima with electronic substituent parameters emphasize the rational design of tailored p-bTAAs with predictable electrochemical and photophysical properties.

Designing Highly Fluorescent BenzoCoumarin‐Sesamol Conjugates for Optoelectronic Applications

AbstractIn this report we have studied, the substitutional effect on photophysical properties of newly synthesized isomeric benzocoumarin‐Sesamol conjugates using absorption, steady‐state fluorescence emission, and time‐resolved emission measurements. The structural characterization of the synthesized dyes was carried out using FT‐IR, 1H‐NMR, 13C‐NMR, and MS. The ground state dipole moment of both the molecules in the gaseous phase is estimated from ab initio computations by using Gaussian 09W software and also from solvatochromic method and the results are compared. Stoke's shift exhibits a redshift with an increase in solvent polarity for synthesized indicating a π–π* transition. The HOMO‐LUMO energy gaps computed from density functional theory and absorption threshold wavelengths are found to be in good agreement with each other. The Global chemical reactivity descriptor parameter and electrostatic potential (MESP) plots suggest that molecules have strong electrophilic and nucleophilic sites. The preliminary photophysical observations and results suggest that the fluorescent dyes can be considered as potential material for the construction of solar cells, fluorescent probes, and chemosensors.

How Permanent Are the Permanent Macrodipoles of Anthranilamide Bioinspired Molecular Electrets?

Dipoles are ubiquitous, and their impacts on materials and interfaces affect many aspects of daily life. Despite their importance, dipoles remain underutilized, often because of insufficient knowledge about the structures producing them. As electrostatic analogues of magnets, electrets possess ordered electric dipoles. Here, we characterize the structural dynamics of bioinspired electret oligomers based on anthranilamide motifs. We report dynamics simulations, employing a force field that allows dynamic polarization, in a variety of solvents. The results show a linear increase in macrodipoles with oligomer length that strongly depends on solvent polarity and hydrogen-bonding (HB) propensity, as well as on the anthranilamide side chains. An increase in solvent polarity increases the dipole moments of the electret structures while decreasing the dipole effects on the moieties outside the solvation cavities. The former is due to enhancement of the Onsager reaction field and the latter to screening of the dipole-generated fields. Solvent dynamics hugely contributes to the fluctuations and magnitude of the electret dipoles. HB with the solvent weakens electret macrodipoles without breaking the intramolecular HB that maintains their extended conformation. This study provides design principles for developing a new class of organic materials with controllable electronic properties. An animated version of the TOC graphic showing a sequence of the MD trajectories of short and long molecular electrets in three solvents with different polarities is available in the HTML version of this paper.

Ultrafast excited state relaxation dynamics of pyran-based D-π-A systems: solvent polarity controls the triplet state.

The excited state relaxation dynamics of V-shaped D-π-A systems having 4H-pyranylidene appended barbituric acid as an acceptor and diphenylamine (TPAPBA) and diethyl amine (EAPBA) as donors were investigated using steady-state and time-resolved spectroscopy along with theoretical optimization. The steady-state photophysical characterization exhibited the bathochromic shift of the emission maximum (∼6400 cm-1) and large change in the dipole moment (∼24D) with an increase of solvent polarity, reflecting the occurrence of the intramolecular charge transfer state (ICT) in the excited state. The nanosecond and femtosecond transient absorption spectra of these derivatives in a non-polar solvent, toluene, reveal that the excited state relaxation pathway involving a local excited state (LE) decayed to ICT followed by the formation of a twisted ICT state by conformational relaxation, finally leading to the triplet state. The lack of observation of a triplet state in the polar solvent, acetonitrile, signifies that the relaxation dynamics of V-shaped triads in the excited state are influenced by the polarity of the solvent.

Regulating and controlling the stepwise ESDPT channel of BP(OH)2DCEt2 using the strategy of solvent polarity and external electric field.

Excited state double proton transfer (ESDPT) has attracted great scientific interest because of its excellent luminescent properties. However, the complex process of ESDPT has plagued theoretical and experimental scientists for a long time and has become a hot issue. In this work, the ESDPT process of 2,2'-bipyridine-3,3'-diol-5,5'-dicarboxylic acid ethyl ester (BP(OH)2DCEt2) is systematically studied and the regulation of the ESDPT process is further realized. The potential energy curves indicate that BP(OH)2DCEt2 shows the characteristics of stepwise ESDPT in different polar solvents. The increase in solvent polarity will be beneficial to the stepwise ESDPT reaction. Regrettably, it is not possible to distinguish the specific stepwise transfer path of the BP(OH)2DCEt2 molecule due to the symmetry of the potential energy surface along the diagonal. On this basis, we proposed a method to control and regulate the stepwise ESDPT path using an external electric field. The results show that the increase of external electric field intensity is favorable to stepwise ESDPT. It is interesting to note that applying an external electric field in a specific direction will effectively distinguish stepwise ESDPT reaction paths. Therefore, this work not only helps to understand the mechanism of ESDPT, but also contributes to regulation and design of new luminescent materials with excellent luminescent properties.

Nonpolar selective emission (NPSE) of carbonyl-bridged rhodols.

Polarity-responsive luminophores (PRLs), whose emission properties change in response to the polarity of the surrounding environment, are used for the fluorescence sensing of intracellular environments and various chemical compounds. Herein, we propose a concept called nonpolar selective emission (NPSE) for the development of a new PRL family. Unlike the conventional emission of PRLs, the NPSE luminophore can switch to a completely non-emissive state upon a slight increase in solvent polarity. The NPSE concept offers a new means of distinguishing between nonpolar and low-polarity environments. Moreover, the NPSE property is little affected by the viscosity of the surrounding medium. We demonstrate that NPSE dyes can be used as emission sensors for molecular gases. Furthermore, we discovered the potential use of NPSE dyes as a time-dependent security ink triggered by the volatilization of polar molecules.

Symmetry breaking charge transfer leading to charge separation in a far-red absorbing bisstyryl-BODIPY dimer.

Symmetry breaking charge transfer is one of the important photo-events occurring in photosynthetic reaction centers that is responsible for initiating electron transfer leading to a long-lived charge-separated state and has been successfully employed in light-to-electricity converting optoelectronic devices. In the present study, we report a newly synthesized, far-red absorbing and emitting BODIPY-dimer to undergo symmetry-breaking charge transfer leading to charge-separated states of appreciable lifetimes in polar solvents. Compared to its monomer analog, both steady-state and time-resolved fluorescence originating from the S1 state of the dimer revealed quenching which increased with an increase in solvent polarity. The electrostatic potential map from DFT and the time-dependent DFT calculations suggested the existence of a quadrupolar type charge transfer state in polar solvents, and the singlet excited state to be involved in the charge separation process. The electrochemically determined redox gap being smaller than the energy of the S1 state supported the thermodynamic feasibility of the envisioned symmetry-breaking charge transfer and separation. The spectrum of the charge-separated state arrived from spectroelectrochemical studies, revealing diagnostic peaks helpful for transient spectral interpretation. Finally, ultrafast transient pump-probe spectroscopy provided conclusive evidence of diabatic charge separation in polar solvents by far-red pulsed laser light irradiation. The measured lifetime of the final charge-separated states was found to be 165 ps in dichlorobenzene, 140 ps in benzonitrile, and 43 ps in dimethyl sulfoxide, revealing their significance in light energy harvesting, especially from the less-explored far-red region.