Increase In Rate Of Loss Research Articles

Two-phase flow and heat transfer on a cylinder via low-velocity jet impact

Combining the benefits of jet impact and phase-transition heat transfer, jet impact boiling has been widely adopted in industrial scenarios. Notably, owing to limitations of high-velocity jets, such as high impact stress and pumping pressure in liquid circuits, low-velocity jet impacting deserves more attention and explorations. In this paper, under an atmospheric environment with wall heating temperatures ranging from 36 °C to 128 °C, the two-phase flow and heat transfer characteristics (local surface temperature, boiling curves and liquid loss rate) of low-velocity jet impacting on a cylindrical surface are investigated by experiment, followed by the analysis on the effects of jet outlet velocity and impact height. The findings reveal that, with the increase of heat transfer rate, the heat transfer regimes in sequence are non-phase transition (single-phase convection and air-liquid two-phase convection) and nucleate boiling. The influences of jet impact height and outlet velocity on local surface temperatures are pronounced at non-phase transition stage. In impact region, along with average superheat, the growth rates of heat transfer rate and liquid loss rate increase significantly from non-phase transition to nucleate boiling stage, and slow down at anaphase of nucleate boiling stage. Interestingly, the increase in outlet velocity delays the onset of slowdown in growth of liquid loss rate to some extent. Overall, the heat transfer rate and liquid loss rate are significantly enhanced at higher jet outlet velocity of 0.60 m/s, but not affected significantly by impact height.

AccFlow: Defending against the Low-Rate TCP DoS Attack in Drones

As drones are widely employed in various industries and daily life, concerns regarding their safety have been gradually emerging. Denial of service (DoS) attacks have become one of the most significant threats to the stability of resource-constrained sensor nodes. Traditional brute-force and high-rate distributed denial of service (DDoS) attacks are easily detectable and mitigated. However, low-rate TCP DoS attacks can considerably impair TCP throughput and evade DoS prevention systems by inconspicuously consuming a small portion of network capacity, and whereas the literature offers effective defense mechanisms against DDoS attacks, there is a gap in defending against Low-Rate TCP DoS attacks. In this paper, we introduce AccFlow, an incrementally deployable Software-Defined Networking (SDN)-based protocol designed to counter low-rate TCP DoS attacks. The main idea of AccFlow is to make the attacking flows accountable for the congestion by dropping their packets according to their loss rates. AccFlow drops their packets more aggressively as the loss rates increase. Through extensive simulations, we illustrate that AccFlow can effectively safeguard against low-rate TCP DoS attacks, even when attackers employ varying strategies involving different scales and data rates. Furthermore, whereas AccFlow primarily addresses low-rate TCP DoS attacks, our research reveals its effectiveness in defending against general DoS attacks. These general attacks do not rely on the TCP retransmission timeout mechanism but rather deplete network resources, ultimately resulting in a denial of service for legitimate users. Additionally, we delve into the scalability of AccFlow and its viability for practical deployment in real-world networks. Finally, we demonstrate the effectiveness of AccFlow in safeguarding network resources.

Recovery of lead and chlorine via thermal co-treatment of municipal solid waste incineration fly ash and lead-rich waste cathode-ray tubes: Analysis of chlorination volatilization mechanism

In this study, a new lead (Pb) and chlorine (Cl) recovery process via the thermal co-treatment of Municipal solid waste (MSW) incineration fly ash (FA) and waste cathode-ray tubes (CRT) was developed and the synergistic effects under different CRT ratios, temperatures, and residence times were comprehensively investigated. Thermogravimetric experiments revealed that the co-processing of FA and CRT exhibited a remarkable synergistic effect as evidenced by the considerable increase in mass loss and mass-loss rate when compared with the theoretical values. When the mixtures with 50% CRT addition was treated at 1200 °C for 60 min, Pb removal rate reached the maximum value of 98.67%, and the Cl removal rate considerably increased by 37.32% compared to that with FA treatment alone. Additionally, the Cl content in the residue was < 2%. It was mainly attributed to the volatilization of chlorides, such as PbCl2, NaCl, and KCl. CaCl2 generated from the decomposition of CaClOH in FA was conducive to improve Pb removal in CRT through indirect chlorination and destroying the glass structure in CRT. Co-processing of FA and CRT demonstrates promising potential for several benefits, including the reduction in melting temperature, recovery of Pb and Cl from secondary fly ash, and the reutilization of calcium-rich slag.

Model Test Study on the Response of Two Different Shallow-Foundation Framed Buildings under Tunnel Volume Loss

In order to study the influence of tunnel volume loss on adjacent framed buildings with different shallow foundations, this paper carried out physical model experiments with two common types of footings (isolated and strip footings) under different working conditions based on the digital image correlation (DIC) technique. The main finding of the present paper is that the increase in formation loss rate will aggravate the deformation and damage of the structure, and the strip foundation shows stronger integrity and stability compared with the isolated foundation in this process. With the increase in the eccentricity of the frames with respect to the tunnel, the overall tilt and damage degree of structural elements increases first and then decreases for both foundations, reaching the maximum value with the eccentric distance of one multiple of the tunnel diameter. Interestingly, when the isolated footings are located directly above the tunnel, the damage in the inner panels is the most severe and gradually decreases with eccentricity, changing from a sagging mode to a hogging mode for the frame form. While the strip footings always maintain slight hogging, and the trend of the damage degree of panels is similar to that of elements, with the eccentric distance reaching two times the tunnel diameter, the strip foundation structure tends to be stable, while the isolated one still needs attention for its potential possibility of damage in panels. The research results have reference value for the impact assessment of adjacent shallow-foundation framed buildings in subway tunnel construction.

Sharp Versus Electric Suction Curettage in Gynecologic Patients Undergoing Evaluation for Abnormal Uterine Bleeding

Suction curettage is preferred over sharp curettage in obstetric settings. We compare the quality of operative tissue sampling between sharp curettage and suction curettage using electric vacuum aspiration for non-obstetric abnormal uterine bleeding in reproductive-aged women. Retrospective cohort study. Community hospital in Long Island, New York. Women ages 21-45 years (n=257) who underwent operative curettage procedure for non-obstetric abnormal uterine bleeding. Independent ratings of specimens from suction curettage using electric vacuum aspiration and sharp curettage by two pathologists blinded to method of tissue collection. The primary outcome was percentage of organized tissue, indicative of a higher quality pathology specimen. Specimens obtained by electric suction curettage (p<.001) had a significantly higher percentage of organized tissue (M=66.28, SD=20.33) than sharp curettage (M=55.51, SD=24.17). There were no differences between the curettage groups for operative time, blood loss, intraoperative complications, or pathology diagnosis. Specimens obtained with suction curettage contained more organized tissue with similar pathologist satisfaction and confidence scores compared to sharp curettage. We suggest clinicians consider electric suction curettage in the diagnostic work-up of abnormal uterine bleeding in reproductive-aged women. In addition, patient-centered benefits include no increase in operative time, blood loss or complication rate compared to sharp curettage.

Effect of drying-wetting cycles on the durability of calcareous sand reinforced by MICP and recycled shredded coconut coir (RSC)

Microbial-induced carbonate precipitation (MICP) technique has been adopted in geotechnical engineering widely. In this study, the effect of drying-wetting cycles on MICP-recycled shredded coconut coir (RSC) reinforced calcareous sand was studied, and the deterioration mechanism under drying-wetting cycles was revealed. Test results indicated that drying-wetting cycles exert an important influence on the durability of MICP-RSC reinforced specimens. With the increase of drying-wetting cycles N, the specimens demonstrated significant increase in mass loss rate and critical void ratio, decrease in maximum shear modulus, peak strength and toughness. Furthermore, an increase in the initial relative density reduced the deterioration of MICP-RSC reinforced specimens exposed to drying-wetting cycles. Higher initial relative density of the specimen correlates with an increased maximum shear modulus, peak stress and toughness, a decreased in permeability and critical void ratio. Microanalysis revealed that the generated calcium carbonate adhering to sand particles and RSC gradually dropped off with the increase of N, weakened cementation, and led to the deterioration of MICP-RSC reinforced specimens, which is consistent with the deterioration characteristics under drying-wetting cycles.

Degradation behavior of 2D auxetic structure with biodegradable polymer under mechanical stress

Coronary heart disease is serious harm to human health. Vascular scaffold implantation is the main treatment. Biodegradable polymers are widely used in vascular scaffolds for good biodegradability and biocompatibility. However, whether the mechanical properties and radial expansion ability can successfully implant the scaffold without acute elastic retraction remains to be further studied. Because of the unique deformation mechanism, shear resistance, and resilience, auxetic structures can effectively avoid the restenosis of degraded vascular scaffolds. Firstly, the plane isotropic and plane anisotropic auxetic structural scaffolds were designed. The control structures (traditional structures) scaffolds were taken as the contrast. PCL was used to prepare the vascular auxetic by 3D printing. The printing parameters of fused deposition 3D printing, such as printing temperature, printing speed, and printing pressure, were studied to determine the optimal printing parameters of PCL. A self-assembled cyclic tensile stress loading device was used to investigate the degradation behavior of different scaffolds under different sizes of cyclic tensile stress, such as surface morphology, pH changes, mass loss rate, and mechanical properties. The increase of stress, surface roughness, and mass loss rate of the scaffolds all showed an increasing trend. pH gradually decreased from the fifth week, and the decrease was proportional to the stress. A large level of stress loading intensifies the decline of elastic modulus and the ultimate strength of the scaffold. In conclusion, the increase of periodic tensile stress will accelerate the degradation of scaffolds, and the degradation behavior of scaffolds with different configurations is different. The degradation rate of dilatant scaffolds was higher than that of control scaffolds, and the degradation rate of anisotropic auxetic scaffolds was higher than that of isotropic auxetic scaffolds, which provides a theoretical reference for the application of auxetic structure in the degradation of vascular scaffolds.

Solid-Solid Interfacial Contact of Tubing Walls Drives Therapeutic Protein Aggregation During Peristaltic Pumping

Peristaltic pumping during bioprocessing can cause therapeutic protein loss and aggregation during use. Due to the complexity of this apparatus, root-cause mechanisms behind protein loss have been long sought. We have developed new methodologies isolating various peristaltic pump mechanisms to determine their effect on monomer loss. Closed-loops of peristaltic tubing were used to investigate the effects of peristaltic pump parameters on temperature and monomer loss, whilst two mechanism isolation methodologies are used to isolate occlusion and lateral expansion-relaxation of peristaltic tubing. Heat generated during peristaltic pumping can cause heat-induced monomer loss and the extent of heat gain is dependent on pump speed and tubing type. Peristaltic pump speed was inversely related to the rate of monomer loss whereby reducing speed 2.0-fold increased loss rates by 2.0- to 5.0-fold. Occlusion is a parameter that describes the amount of tubing compression during pumping. Varying this to start the contacting of inner tubing walls is a threshold that caused an immediate 20-30% additional monomer loss and turbidity increase. During occlusion, expansion-relaxation of solid-liquid interfaces and solid-solid interface contact of tubing walls can occur simultaneously. Using two mechanisms isolation methods, the latter mechanism was found to be most destructive and a function of solid-solid contact area, where increasing the contact area 2.0-fold increased monomer loss by 1.6-fold. We establish that a form of solid-solid contact mechanism whereby the contact solid interfaces disrupt adsorbed protein films is the root-cause behind monomer loss and protein aggregation during peristaltic pumping.

The effects of Meloxicam application on quality of life and development in calves

Although it is stated that there is an increase in calf loss rates at the global level and especially in modern dairy farms, this issue, which is an international animal welfare issue, has not been adequately defined at the national, large farm, or small farm level in most developing Countries. The rate of calf deaths before, during, and after birth is between 2–20% in heifers and cows. Previous studies showed that 75% of deaths occur during birth or within the first hour after birth, 10% before birth, and 15% within 48 hours after birth. This study aimed to determine the effect of Meloxicam administration on the quality of life and development of calves. An experimental method was used to achieve the aim of this research. A total of 60 Holstein calves, 30 in the experimental group and 30 in the control group, were included in the study for the study group. MELOXICAM (0.5 mg·kg-1) was administered to the mother cow and the calf immediately after birth, 2 days before the expected delivery. In this study, an 8 week process was passed to collect the data. It was concluded that Meloxicam did not affect the BHBA values of maternal cows. No calves died from pneumonia and diarrhea–related diseases after being treated with Meloxicam. From the total protein and total albumin values of the calves, it was concluded that Meloxicam did not affect the protein ratio, but did affect the albumin ratio. It was concluded that Meloxicam application increased the vital activity of calves.

The effect of CaO on coal gasification reaction with high-temperature copper slag as catalyst

ABSTRACT In order to improve the calorific value and reducibility of the syngas produced by traditional coal gasification technology, and to solve the problem of high cost of heat source in coal gasification, this paper proposes to use high-temperature copper slag as the heat carriers and catalyst for coal gasification, and CaO as the CO2 adsorbent during the coal gasification reaction. In this way, the proportion of H2 in the syngas gas can be increased, and the coal gasification reaction can be improved. In the experiment, the samples with different ratios were fully mixed, and then thermogravimetric experiment and gasification experiment were carried out. Through research, the following rules were found. The use of high-temperature copper slag as the heat source and catalyst in coal gasification can lead to a 20% increase in the final weight loss rate. Additionally, when CaO is used as the CO2 adsorbent during the coal gasification reaction, a noticeable secondary weight loss occurs at around 600°C and can reach a maximum speed of 0.19%/min. The use of the C/S/CaO = 1/1/2 ratio can result in a maximum weight loss rate of 23%. Meanwhile, the C/S/CaO = 1/2/1 group has been shown to achieve a maximum weight loss speed of 0.5%/min, and the C/S/CaO = 1/1/1 group exhibits a maximum secondary weight loss speed of 0.32%/min. The samples after gasification experiment were analyzed by SEM, CaO produced clustered iron-based and porous structure on the surface of copper slag in gasification reaction. Based on the Coats-Redfern method, kinetics of gasification reaction is obtained, and the optimum fitting function is C2, mechanism functions didn’t change with the variation of C/S/CaO. The research results suggest that CaO and copper slag can both enhance the coal gasification reaction. In addition, CaO is proven to be a more affordable and accessible CO2 adsorbent compared to other alternatives.

Jiawei Shoutai Pill promotes decidualization by regulating the SGK1/ENaC pathway in recurrent spontaneous abortion

Ethnopharmacological relevanceJiawei Shoutai Pill (JWSTW) is a traditional herbal formula for recurrent spontaneous abortion (RSA). Although JWSTW significantly improves the clinical symptoms of RSA patients, its molecular mechanism remains unclear. Aim of studyThis study evaluated the expression and function of the serum/glucocorticoid regulated kinase 1/epithelial sodium channel (SGK1/ENaC) pathway and decidualization level in RSA patients and mice. It also investigated the therapeutic effects and potential mechanisms of JWSTW. Materials and methods30 early RSA patients and 30 normal pregnant women undergoing induced abortion during the same period were included in the study. Decidual tissues were collected, and HE staining, immunohistochemistry, Western blot, and RT-PCR were used to detect protein and mRNA expression levels of SGK1, ENaC-a, estrogen Rreceptor β (ERβ), and progesterone receptor (PR) in patients’ decidual tissues. Protein expression levels of prolactin receptor (PRLR) and insulin-like growth factor binding protein 1 (IGFBP-1) were also detected. A classical RSA mouse model was constructed, and the mice were randomly divided into four groups: normal, model, dydrogesterone (DQYT) (0.33 g/kg/d), and JWSTW (1.66 g/kg/d). The normal and model groups received the same volume of distilled water by gavage for 8 and 14 days after pregnancy. On the 14th day of pregnancy, the embryonic loss rate of each group, the number of offspring born to naturally delivered mice, and the protein or mRNA expression levels of key factors of the SGK1/ENaC pathway (SGK1, ENaC-a, ERβ, and PR), decidual proliferation marker (Ki67), mesenchymal-epithelial transition (E-cadherin and Vimentin), and decidualization markers (PRLR and IGFBP-1) in mouse decidual tissue on the eighth day of pregnancy were observed. ResultsThe decidual tissue structure of RSA patients was abnormal. Immunohistochemical analysis revealed significantly reduced positive expression of SGK1, ENaC-a, ERβ, and PR proteins in the decidual tissue of RSA patients (P < 0.001). Western blot and RT-PCR analyses demonstrated significantly decreased protein and mRNA expression of SGK1, ENaC-a, ERβ, and PR in the decidual tissue of RSA patients (all P < 0.05). Additionally, protein expression of PRLR and IGFBP-1 was significantly reduced (both P < 0.001). The RSA mouse model exhibited a significant increase in embryo loss rate and decreased litter size (both P < 0.001). Treatment with DQYT and JWSTW rescued the embryo loss rate and litter size to varying extents (all P < 0.05). The protein or mRNA expression levels of SGK1, ENaC-a, ERβ, PR, Ki67, E-cadherin, vimentin, PRLR, and IGFBP-1 in RSA mice were improved to different degrees after treatment with DQYT and JWSTW (all P < 0.05). ConclusionsAbnormal SGK1/ENaC signaling pathway regulation is closely associated with early endometrial damage in RSA patients. JWSTW promotes endometrial proliferation and mesenchymal-epithelial transition through the SGK1/ENaC signaling pathway, improving endometrial shedding. Consequently, JWSTW is a potential treatment for RSA.

An energy‐efficient power allocation algorithm under reliability constraint for industrial Internet of Thing systems

SummaryWith the development of 5G technology, the Internet of Things (IoT) system is becoming more and more widely used in various fields. However, the reliability issue still hinders the wide applications. For instance, the transmission reliability of the IoT system will be significantly affected by the status of end devices, wireless channel quality, and the environment. Moreover, according to the Automatic Repeat‐reQuest (ARQ) retransmission mechanism in the 802.15.4 protocol, if the IoT end devices pursue a conservative power model causing low signal transmission power, it is likely that the signal power will lose too much during the transmission process. This will result in the increase of the network packet loss rate and the power consumption during the data retransmission. To solve this problem, this paper proposes a reasonable transmission power allocation algorithm to ensure the transmission reliability, considering the ARQ retransmission mechanism. The algorithm intends to find the optimal transmission power of each IoT end device, so as to minimize the total energy consumption. The simulation results demonstrate that the power allocation algorithm improves the reliability of the IoT system, compared with other algorithms.

Leader-Follower Quasi-Consensus of Multi-Agent Systems with Packet Loss Using Event-Triggered Impulsive Control

This paper focuses on the leader–follower quasi-consensus problem of multi-agent systems, considering the practical communication scenarios which involve packet loss. The phenomenon of packet loss is described in terms of the packet loss rate. A novel hybrid event-triggered impulsive control strategy is proposed, the Lyapunov stability theory is employed to derive sufficient conditions for realizing the leader–follower quasi-consensus, and the exclusion of Zeno behavior is demonstrated. Finally, a numerical simulation example is provided to verify the effectiveness of the proposed approach. The simulation results indicate that the packet loss rate is closely related to the control gain and the maximum triggered interval, specifically because as the packet loss rate increases, the trigger frequency also increases.

Combination of 3’,4’,5,7-tetrahydroxy isoflavone and active modified atmosphere packaging inhibits yellowing, maintains quality, and prolongs shelf life of fresh peeled water chestnuts (Eleocharis dulcis)

Yellowing and quality loss shorten the shelf life of fresh peeled water chestnuts (FPWCs). The purpose of this study was to elucidate the mechanism by which the combination of 3’,4’,5,7-tetrahydroxy isoflavone (3’,4’,5,7-THIF) and active modified atmosphere packaging (AMAP) prolonged the shelf life of FPWCs. FPWCs were treated with 1.0% 3’,4’,5,7-THIF, AMAP (18.3% O2, 81.7% N2), and a combination of 1.0% 3’,4’,5,7-THIF and AMAP (18.3% O2, 81.7% N2). The yellowing extent, mass loss rate, enzymatic activities, yellowing substance concentrations, quality, and microorganisms of FPWCs were analyzed. The results showed that the three treatments all inhibited the increase in the mass loss rate and activity of peroxidase and lowered the eriodictyol concentration. AMAP (18.3% O2, 81.7% N2) and the combination of 1.0% 3’,4’,5,7-THIF and AMAP (18.3% O2, 81.7% N2) inhibited the respiration of FPWCs and increased the total soluble solids, titratable acidity, and ascorbic acid concentrations. The three treatments had no significant effects on the activities of polyphenol oxidase and phenylalanine lyase and naringenin concentration. 3’,4’,5,7-THIF (1.0%), AMAP (18.3% O2, 81.7% N2), and the combination of 1.0% 3’,4’,5,7-THIF and AMAP (18.3% O2, 81.7% N2) prolonged the shelf life of FPWCs by 6, 6, and 12 d, respectively. The combination of 1.0% 3’,4’,5,7-THIF and AMAP (18.3% O2, 81.7% N2) was optimal among the three treatment methods. These results suggested that the combination of 1.0% 3’,4’,5,7-THIF and AMAP (18.3% O2, 81.7% N2) might be used to extend the shelf life of FPWCs in practice.

Wear properties and microstructural characteristics of mild steel cladded with AISI 316L stainless steel using constant current gas metal arc welding process

The main objective of this study is to investigate the microstructure and wear resistance of AISI 316L austenitic stainless steel (ASS) cladding deposited over mild steel (MS) of grade IS 2062 using constant current (CC-GMAW) gas metal arc welding process. The microstructural features of cladded region were analyzed using optical microscopy (OM). The wear rate of cladded specimens was studied using pin-on-disc method and the morphology of wear surfaces was studied using scanning electron microscopy (SEM). The microhardness distribution of cladded region was analyzed and correlated to the wear performance of cladded specimens. The results showed that CC-GMAW cladded surface exhibited greater hardness and wear resistance compared to mild steel substrate. The overlay region of CC-GMAW clad showed the evolution of dendritic structure and columnar grains. The CC-GMAW cladding showed martensite laths and widmanstätten ferrite plates microstructure in the HAZ region closer to interface. The wear rate of CC-GMAW cladding increases with increase in load from 1.5 kg to 5.5 kg. It showed 422.85% and 423.58% increase in material weight loss and wear rate at higher loads. The materials weight loss of CC-GMAW cladding increases from 0.0082 g to 0.0517 g with increase in speed from 150 rpm to 550 rpm. The wear rate of CC-GMAW cladding increases from 3.66 × 10-5 g/m to 10.94 × 10-5 g/m with increase in temperature from 27 °C to 200 °C.

Dysregulated Gln-Glu-α-ketoglutarate axis impairs maternal decidualization and increases the risk of recurrent spontaneous miscarriage

Recurrent spontaneous miscarriage (RSM) affects 1%-2% of fertile women worldwide and poses a risk of future pregnancy complications. Increasing evidence has indicated that defective endometrial stromal decidualization is a potential cause of RSM. Here, we perform liquid chromatography with mass spectrometry (LC-MS)-based metabolite profiling in human endometrial stromal cells (ESCs) and differentiated ESCs (DESCs) and find that accumulated α-ketoglutarate (αKG) derived from activated glutaminolysis contributes to maternal decidualization. Contrarily, ESCs obtained from patients with RSM show glutaminolysis blockade and aberrant decidualization. We further find that enhanced Gln-Glu-αKG flux decreases histone methylation and supports ATP production during decidualization. Invivo, feeding mice a Glu-free diet leads to a reduction of αKG, impaired decidualization, and an increase of fetal loss rate. Isotopic tracing approaches demonstrate Gln-dependent oxidative metabolism as a prevalent direction during decidualization. Our results demonstrate an essential prerequisite of Gln-Glu-αKG flux to regulate maternal decidualization, suggesting αKG supplementation as a putative strategy to rectify deficient decidualization in patients with RSM.

Upslope fire spread and heat transfer mechanism over a pine needle fuel bed with different slopes and winds

The surface fire spread involved slope and wind effects are significantly important in wildland fires, while very limited attention has been paid on the heat transfer mechanism, especially for different fire line conditions. This work experimentally evaluates the effects of slope angle (0˚ to 30˚) and wind velocity (0 to 2 m/s) on spread of surface fire over a pine needle fuel bed. Flame length, flame angle, rate of fire spread, fuel consumption rate and heat flux are acquired and quantitatively analyzed. Two different fireline shapes of sheet and inverted ‘v’ are observed and assumed for different wind velocities and slope angles, respectively. The flame length, rate of spread, mass loss rate and heat flux increase with the increasing wind velocity and slope angle, while flame angle and fuel consumption efficiency vary in the opposite way. The extreme fire can be observed with the external manifestations of a steep increase in flame length, rate of spread and heat flux under conditions of larger wind velocity and slope angle, which is similar to an eruptive fire. In addition, the heat transfer of convection and radiation heat flux is quantitatively analyzed with wind velocity and slope angle to explore heat flux control mechanism. Moreover, the modified models of radiation heat flux considering fire line shape are presented, which demonstrates good effectiveness in predicting radiation heat flux by comparing the calculated values and experimental data.

Experimental survey of static pressure in stepped chutes with inclined and horizontal steps equipped with end sills in nappe and skimming flow regimes

A spillway is one of the most important parts of a dam for controlling floods. Among different types of spillways, stepped spillways are one of the best energy dissipaters. Due to technological advances and the satisfaction of two elements for safe and low-cost construction, the use of stepped spillways has increased widely. Due to this, more studies are focused on stepped spillways. Researchers have made some efforts and proposed different methods to improve structural efficiency to dissipate energy. Modifications on step geometry, regarding flow regime type, are one of these efforts. Flow pressure and its fluctuations on the steps of the stepped spillways is one of the main factors affecting structural design and safety. In this experimental research, reverse inclined steps combined with the end sills have been applied in four degrees [0o (horizontal), 5o, 8o, and 11o] to obtain static pressure in both the nappe flow and skimming flow regimes of stepped spillways. Static pressure obtained from reverse inclined steps with end sills have been compared to the amount in the horizontal step. Results indicate a slight increase in the energy loss rate when reverse inclined steps have been applied in the nappe flow regime of stepped spillways.

The Effectiveness and Safety of Rectal Modular Resection in Low Rectal Cancer: A Retrospective Study.

Background: Described by Heald in 1982, total mesorectal excision (TME) is now routinely performed as the standard procedure for mid-low rectal cancer, with remarkable decrease in local recurrence and improved oncology outcome. However, the integrity of the resected mesentery and damage to autonomic nerves still remain challenging for general surgeons, especially in the cohort of neoadjuvant therapy patients. The concept of rectal modular resection (RMR), based on an integral understanding of the regional anatomy, was proposed as a surgical skill for dissociation of the rectum with shorter surgical duration, function preservation, and improved oncology outcome. Methods: This was a retrospective trial. Patients with resectable rectal lesions, ranging between 3 and 7 cm from the anal verge, were enrolled and grouped by TME surgery based on RMR or classical procedure resection (CPR). We estimated perioperative outcomes, including surgery complications such as anastomotic leak, urine retention, and others. Pathological properties, including distal clearance, harvested lymph nodes, tumor differentiation, and specimen grading, were also taken into account. Patients were followed postoperatively and functional evaluation was recorded at the 3-month and 1-year postoperation visits. Results: From January 2019 to December 2021, a total of 92 patients were enrolled in this study. TME surgery complying with the RMR methodology was performed with a back-to-bilateral-to-front modular proceeding. Duration of operation was significantly shortened in the RMR group, without increase in blood loss or failure rate of anus preservation. The quality of the specimen, graded according to integrity of the mesorectum, stands out in the RMR group. Functional evaluation revealed no statistical difference between RMR and CPR groups regarding sexual ability impairment and defecation disorder since follow-up is still ongoing. Conclusions: RMR-based TME was efficient with compressed operation duration compared with CPR and its safety was well validated with regard to the occurrence of complications and function loss.

1-Methylcyclopropene and UV-C Treatment Effect on Storage Quality and Antioxidant Activity of 'Xiaobai' Apricot Fruit.

The 'Xiaobai' apricot fruit is rich in nutrients and is harvested in summer, but the high temperature limits its storage period. To promote commercial quality and extend shelf life, we investigated the effectiveness of Ultraviolet C (UV-C) combined with 1-methylcyclopropene (1-MCP) treatment on 'Xiaobai' apricot fruit stored at 4 ± 0.5 °C for 35 days. The results revealed that the combination treatment of 1-MCP and UV-C performed better than either UV-C or 1-MCP alone in fruit quality preservation. The combination treatment could delay the increase in weight loss, ethylene production, and respiration rate; retain the level of soluble solid content, firmness, titratable acid, and ascorbic acid content; promote the total phenolics and flavonoids accumulation; improve antioxidant enzyme activity and relative gene expression, and DPPH scavenging ability; and reduce MDA, H2O2, O2.- production. The combined treatment improved the quality of apricot fruit by delaying ripening and increasing antioxidant capacity. Therefore, combining UV-C and 1-MCP treatment may be an effective way to improve the post-harvest quality and extend the storage period of the 'Xiaobai' apricot fruit, which may provide insights into the preservation of 'Xiaobai' apricot fruit.