Increase In Bilayer Thickness Research Articles

Mitocans induce lipid flip-flop and permeabilize the membrane to signal apoptosis

Pancratistatin (PST) and narciclasine (NRC) are natural therapeutic agents that exhibit specificity toward the mitochondria of cancerous cells and initiate apoptosis. Unlike traditional cancer therapeutic agents, PST and NRC are effective, targeted, and have limited adverse effects on neighboring healthy, noncancerous cells. Currently, the mechanistic pathway of action for PST and NRC remains elusive, which in part inhibits PST and NRC from becoming efficacious therapeutic alternatives. Herein, we use neutron and x-ray scattering in combination with calcein leakage assays to characterize the effects of PST, NRC, and tamoxifen (TAM) on a biomimetic model membrane. We report an increase in lipid flip-flop half-times (t1/2) (≈12.0%, ≈35.1%, and a decrease of ≈45.7%) with 2 mol percent PST, NRC, and TAM respectively. An increase in bilayer thickness (≈6.3%, ≈7.8%, and ≈7.8%) with 2 mol percent PST, NRC, and TAM, respectively, was also observed. Lastly, increases in membrane leakage (≈31.7%, ≈37.0%, and ≈34.4%) with 2 mol percent PST, NRC, and TAM, respectively, were seen. Considering the maintenance of an asymmetric lipid composition across the outer mitochondrial membrane (OMM) is crucial to eukaryotic cellular homeostasis and survival, our results suggest PST and NRC may play a role in disrupting the native distribution of lipids within the OMM. A possible mechanism of action for PST- and NRC-induced mitochondrial apoptosis is proposed via the redistribution of the native OMM lipid organization and through OMM permeabilization.

Phase formation of cubic silicon carbide from reactive silicon–carbon multilayers

Silicon carbide layers were fabricated using self-propagating high-temperature synthesis of binary silicon-carbon based reactive multilayers. The silicon and carbon bilayers were fabricated with two different bilayer thicknesses. They are deposited by magnetron sputtering in an alternating layer system with a total thickness of 1 μm. The entire system is annealed by rapid thermal annealing at different temperatures ranging from 500 to 1100 °C. From XRD analysis we could find that the formation of the silicon carbide phase was initiated from 700 °C. With increasing bilayer thickness the silicon carbide phase formation was partially suppressed by the silicon recrystallization due to resulting lower carbon diffusion into silicon. The transformation process proceeds in a four-step process: densification/recrystallization, interdiffusion, nucleation and transformation. From this, it was noted that when compared to low bilayer thickness samples, the formation of the silicon carbide phase is delayed with increasing bilayer thickness and needs higher reaction initiation temperatures.Graphical abstract

Incorporation and localisation of alkanes in a protomembrane model by neutron diffraction

Protomembranes at the origin of life were likely composed of short-chain lipids, readily available on the early Earth. Membranes formed by such lipids are less stable and more permeable under extreme conditions, so a novel membrane architecture was suggested to validate the accuracy of this assumption. The model membrane includes the presence of a layer of alkanes in the mid-plane of the protomembrane in between the two monolayer leaflets and lying perpendicular to the lipid acyl chains. Here, we investigated such a possibility experimentally for membranes formed by the short-chain phospholipid 1,2-didecanoyl-sn-glycero-3-phophocholine, including or not the alkanes eicosane, squalane or triacontane by means of neutron membrane diffraction and contrast variation. We found strong indications for incorporation of two of the three alkanes in the membrane mid-plane through the determination of neutron scattering length density profiles with hydrogenated vs deuterated alkanes and membrane swelling at various relative humidities indicating a slightly increased bilayer thickness when the alkanes are incorporated into the bilayers. The selectivity of the incorporation points out the role of the length of the n-alkanes with respect to the capacity of the membrane to incorporate them.

Influence of molecular weight of polycation polydimethyldiallylammonium and carbon nanotube content on electric conductivity of layer-by-layer films

For biological and engineering applications, nm-thin films with high electrical conductivity and tunable sheet resistance are desirable. Multilayers of polydimethyldiallylammonium chloride (PDADMA) with two different molecular weights (322 and 44.3 kDa) and oxidized carbon nanotubes (CNTs) were constructed using the layer-by-layer technique. The surface coverage of the CNTs was monitored with a selected visible near infrared absorption peak. Both the film thickness and the surface coverage of the CNTs increased linearly with the number of CNT/PDADMA bilayers deposited (film thickness up to 80 nm). Atomic force microscopy images showed a predominantly surface-parallel orientation of CNTs. Ohmic behavior with constant electrical conductivity of each CNT/PDADMA film and conductivity up to 4 · 103 S/m was found. A change in PDADMA molecular weight by almost a factor of ten has no effect on the film thickness and electrical conductivity, only the film/air roughness is reduced. However, increasing CNT concentration in the deposition dispersion from 0.15 up to 0.25 mg/ml results in an increased thickness of a CNT/PDADMA bilayer (by a factor of three). The increased bilayer thickness is accompanied by a decreased electrical conductivity (by a factor of four). The decreased conductivity is attributed to the increased monomer/CNT ratio.

Role of cholesterol flip-flop in oxidized lipid bilayers

We performed a series of molecular dynamics simulations of cholesterol (Chol) in nonoxidized 1-palmitoyl-2-linoleoyl-sn-glycero-3-phosphatidylcholine (PLPC) bilayer and in binary mixtures of PLPC-oxidized-lipid-bilayers with 0–50% Chol concentration and oxidized lipids with hydroperoxide and aldehyde oxidized functional groups. From the 60 unbiased molecular dynamics simulations (total of 161 μs), we found that Chol inhibited pore formation in the aldehyde-containing oxidized lipid bilayers at concentrations greater than 11%. For both pure PLPC bilayer and bilayers with hydroperoxide lipids, no pores were observed at any Chol concentration. Furthermore, increasing cholesterol concentration led to a change of phase state from the liquid-disordered to the liquid-ordered phase. This condensing effect of Chol was observed in all systems. Data analysis shows that the addition of Chol results in an increase in bilayer thickness. Interestingly, we observed Chol flip-flop only in the aldehyde-containing lipid bilayer but neither in the PLPC nor the hydroperoxide bilayers. Umbrella-sampling simulations were performed to calculate the translocation free energies and the Chol flip-flop rates. The results show that Chol’s flip-flop rate depends on the lipid bilayer type, and the highest rate are found in aldehyde bilayers. As the main finding, we shown that Chol stabilizes the oxidized lipid bilayer by confining the distribution of the oxidized functional groups.

Investigating the competitive effects of cholesterol and melatonin in model lipid membranes

We have studied the impact of cholesterol and/or melatonin on the static and dynamical properties of bilayers made of DPPC or DOPC utilizing neutron scattering techniques, Raman spectroscopy and molecular dynamics simulations. While differing in the amplitude of the effect due to cholesterol or melatonin when comparing their interactions with the two lipids, their addition ensued recognizable changes to both types of bilayers. As expected, based on the two-component systems of lipid/cholesterol or lipid/melatonin studied previously, we show the impact of cholesterol and melatonin being opposite and competitive in the case of three-component systems of lipid/cholesterol/melatonin. The effect of cholesterol appears to prevail over that of melatonin in the case of structural properties of DPPC-based bilayers, which can be explained by its interactions targeting primarily the saturated lipid chains. The dynamics of hydrocarbon chains represented by the ratio of trans/gauche conformers reveals the competitive effect of cholesterol and melatonin being somewhat more balanced. The additive yet opposing effects of cholesterol and melatonin have been observed also in the case of structural properties of DOPC-based bilayers. We report that cholesterol induced an increase in bilayer thickness, while melatonin induced a decrease in bilayer thickness in the three-component systems of DOPC/cholesterol/melatonin. Commensurately, by evaluating the projected area of DOPC, we demonstrate a lipid area decrease with an increasing concentration of cholesterol, and a lipid area increase with an increasing concentration of melatonin. The demonstrated condensing effect of cholesterol and the fluidizing effect of melatonin appear in an additive manner upon their mutual presence.

Dehydration induced dynamical heterogeneity and ordering mechanism of lipid bilayers.

Understanding the influence of dehydration on the membrane structure is crucial to control membrane functionality related to domain formation and cell fusion under anhydrobiosis conditions. To this end, we perform all-atom molecular dynamic simulations of 1,2-dimyristoyl-sn-glycero-3-phosphocholine dimyristoylphosphatidylcholine lipid membranes at different hydration levels at 308 K. As dehydration increases, the lipid area per head group decreases with an increase in bilayer thickness and lipid order parameters indicating bilayer ordering. Concurrently, translational and rotational dynamics of interfacial water (IW) molecules near membranes slow down. On the onset of bilayer ordering, the IW molecules exhibit prominent features of dynamical heterogeneity evident from non-Gaussian parameters and one-dimensional van Hove correlation functions. At a fully hydrated state, diffusion constants (D) of the IW follow a scaling relation, D∼τα -1, where the α relaxation time (τα) is obtained from self-intermediate scattering functions. However, upon dehydration, the relation breaks and the D of the IW follows a power law behavior as D∼τα -0.57, showing the signature of glass dynamics. τα and hydrogen bond lifetime calculated from intermittent hydrogen bond auto-correlation functions undergo a similar crossover in association with bilayer ordering on dehydration. The bilayer ordering is accompanied with an increase in fraction of caged lipids spanned over the bilayer surface and a decrease in fraction of mobile lipids due to the non-diffusive dynamics. Our analyses reveal that the microscopic mechanism of lipid ordering by dehydration is governed by dynamical heterogeneity. The fundamental understanding from this study can be applied to complex bio-membranes to trap functionally relevant gel-like domains at room temperature.

Membrane Lipids and Cellular Water Modulate the G‐Protein–Coupled Receptor Activation

G-protein-coupled receptors (GPCRs) are a pivotal superfamily of seven-helix transmembrane receptors responsible for the transduction of stimuli across cellular membranes. They are the targets of ~30% of the pharmaceuticals currently in the market. Understanding how the soft membrane matter (membrane Lipids and Cellular Water) influences the structural changes during the activation of GPCRs is crucial to discovering and developing novel GPCR-targeted drugs. Their dynamic conformational ensembles encompassing various inactive and active states can be biased by the lipids and surrounding aqueous environments [1]. By using different polyethylene glycol (PEG) solutions, we explored the effect of osmotic pressure and lipid bilayer composition on the metarhodopsin equilibrium of the archetypical GPCR rhodopsin in native membranes and POPC recombinant membranes [2]. Our results show a flood of ~80 water molecules into the rhodopsin interior during photoactivation, forming a solvent-swollen Meta-II active state [3]. Under applied osmotic pressure, the overall equilibrium generally shifted to Meta-I. Dehydrating conditions favor Meta-I through the efflux of water from the protein interior while increasing bilayer thickness and the monolayer spontaneous curvature favor Meta-II. The osmotic effect on the protein is more significant than the effect of the lipid bilayer. However, small osmolytes favored the Meta-II state at lower concentrations because they can penetrate the protein core giving a lower excluded volume, decreasing the osmotic effect on the protein and favoring the Meta-II state. Furthermore, the metarhodopsin equilibrium was shifted towards the Meta-I state in POPC recombinant membranes compared to the native membrane environment. Analysis of transducin C-terminal peptide-binding isotherms revealed that the binding affinity is significantly decreased when the lipid environment is changed from the native lipids to POPC lipids. The POPC lipid membrane has zero-spontaneous curvature that shifts the equilibrium towards the more compact, inactive Meta-I state. By contrast, the native lipid membrane environment has a negative spontaneous curvature that favors the more expanded state of Meta-II. Our results delineate the crucial role of soft matter in regulating the metarhodopsin equilibrium in a membrane environment. [1] M.F. Brown (2017) Annu. Rev. Biophys. 46, 379-410. [2] N. Weerasinghe et al. (2018) Biophys. J. 114, 274a. [3] U. Chawla et al. (2020) Angew. Chem. Int. Ed. doi: https://doi.org/10.1002/ange.202003342.

Solvation Drives G-Protein-Coupled Receptor Activation

G-protein–coupled receptors (GPCRs) are membrane proteins that transduce information across lipid bilayers. Their dynamic conformational ensembles encompassing various inactive and active states can be biased by the lipids and surrounding aqueous environments. By using different polyethylene glycol (PEG) solutions, we explored the effect of osmotic pressure and lipid bilayer composition on the metarhodopsin equilibrium of the archetypical GPCR rhodopsin in native membranes and POPC recombinant membranes. Our results show a flood of ∼80 water molecules into the rhodopsin interior during photoactivation, forming a solvent-swollen Meta-II active state [1]. Under applied osmotic pressure, the overall equilibrium generally shifted to Meta-I. Dehydrating conditions favor Meta-I through an efflux of water from the protein interior, while increasing bilayer thickness and the monolayer spontaneous curvature favor Meta-II. The osmotic effect on the protein is more significant than the effect of the lipid bilayer. However, small osmolytes favored the Meta-II state at lower concentrations, because they can penetrate the protein core giving a lower excluded volume, decreasing the osmotic effect on the protein and favoring the Meta-II state. Furthermore, the metarhodopsin equilibrium was shifted towards the Meta-I state in POPC recombinant membranes compared to the native membrane environment. Analysis of transducin C-terminal peptide-binding isotherms revealed that the binding affinity is significantly decreased when the lipid environment is changed from the native lipids to POPC lipids. The POPC lipid membrane has zero-spontaneous curvature that shifts the equilibrium towards the more compact, inactive Meta-I state. By contrast, the native lipid membrane environment has a negative spontaneous curvature that favors the more expanded state of Meta-II. Our results delineate the crucial role of soft matter in regulating the metarhodopsin equilibrium in a membrane environment. [1] U. Chawla et al. (2020) Angew. Chem. Int. Ed. DOI: https://doi.org/10.1002/ange.202003342.

Unique Properties of Tightly Docked Membranes Prior to their Fusion

Membrane merger through fusion is essential in myriad of processes including neurotransmission and viral infection. Although there are various classes of fusion proteins, they are believed to catalyze membrane fusion through a common pathway. Despite the importance of understanding of this process, the exact mechanisms underlying steps immediately before the first bilayer disruption remain uncharacterized. Here, we characterized mechanism leading to a change in lipid arrangement in membranes arrested in a state that precedes hemifusion. Such tightly adhering membranes with a distance of <1 nm are known from cryo-electron microscopy as fusion intermediates of trafficking organelles, mitochondria, or during cell entry by enveloped viruses. With the use of an in vitro reconstitution system consisting of lipid vesicles with SNARE proteins, we demonstrate formation of a metastable, divalent cation-independent, and protein-free membrane-membrane interface characterized by increased thickness. Furthermore, we confirm that structural rearrangements in the membranes are arising due to membrane intrinsic properties by performing all-atom molecular dynamics simulations of double-membrane systems at varying distances. In turn, we would like to propose that increase in membrane thickness arises by dehydration-driven lipid headgroup tilting leading to lateral area shrinkage that results in increased bilayer thickness visible in experiments.

PH-triggered pore-forming peptides with strong composition-dependent membrane selectivity

Peptides that self-assemble into nanometer-sized pores in lipid bilayers could have utility in a variety of biotechnological and clinical applications if we can understand their physical chemical properties and learn to control their membrane selectivity. To empower such control, we have used synthetic molecular evolution to identify the pH-dependent delivery peptides, a family of peptides that assemble into macromolecule-sized pores in membranes at low peptide concentration but only at pH < ∼6. Further advancements will also require better selectivity for specific membranes. Here, we determine the effect of anionic headgroups and bilayer thickness on the mechanism of action of the pH-dependent delivery peptides by measuring binding, secondary structure, and macromolecular poration. The peptide pHD15 partitions and folds equally well into zwitterionic and anionic membranes but is less potent at pore formation in phosphatidylserine-containing membranes. The peptide also binds and folds similarly in membranes of various thicknesses, but its ability to release macromolecules changes dramatically. It causes potent macromolecular poration in vesicles made from phosphatidylcholine with 14 carbon acyl chains, but macromolecular poration decreases sharply with increasing bilayer thickness and does not occur at any peptide concentration in fluid bilayers made from phosphatidylcholine lipids with 20-carbon acyl chains. The effects of headgroup and bilayer thickness on macromolecular poration cannot be accounted for by the amount of peptide bound but instead reflect an inherent selectivity of the peptide for inserting into the membrane-spanning pore state. Molecular dynamics simulations suggest that the effect of thickness is due to hydrophobic match/mismatch between the membrane-spanning peptide and the bilayer hydrocarbon. This remarkable degree of selectivity based on headgroup and especially bilayer thickness is unusual and suggests ways that pore-forming peptides with exquisite selectivity for specific membranes can be designed or evolved.

Mapping bilayer thickness in the ER membrane.

In the plasma membrane and in synthetic membranes, resident lipids may laterally unmix to form domains of distinct biophysical properties. Whether lipids also drive the lateral organization of intracellular membranes is largely unknown. Here, we describe genetically encoded fluorescent reporters visualizing local variations in bilayer thickness. Using them, we demonstrate that long-chained ceramides promote the formation of discrete domains of increased bilayer thickness in the yeast ER, particularly in the future plane of cleavage and at ER-trans-Golgi contact sites. Thickening of the ER membrane in the cleavage plane contributed to the formation of lateral diffusion barriers, which restricted the passage of short, but not long, protein transmembrane domains between the mother and bud ER compartments. Together, our data establish that the ER membrane is laterally organized and that ceramides drive this process, and provide insights into the physical nature and biophysical mechanisms of the lateral diffusion barriers that compartmentalize the ER.

Cholesterol Effect on the Specific Capacitance of Submicrometric DOPC Bilayer Patches Measured by in-Liquid Scanning Dielectric Microscopy.

The specific capacitance of biological membranes is a key physical parameter in bioelectricity that also provides valuable physicochemical information on composition, phase, or hydration properties. Cholesterol is known to modulate the physicochemical properties of biomembranes, but its effect on the specific capacitance has not been fully established yet. Here we use the high spatial resolution capabilities of in-liquid scanning dielectric microscopy in force detection mode to directly demonstrate that DOPC bilayer patches at 50% cholesterol concentration show a strong reduction of their specific capacitance with respect to pure DOPC bilayer patches. The reduction observed (∼35%) cannot be explained by the small increase in bilayer thickness (∼16%). We suggest that the reduction of the specific capacitance might be due to the dehydration of the polar head groups caused by the insertion of cholesterol molecules in the bilayer. The results reported confirm the potential of in-liquid SDM to study the electrical and physicochemical properties of lipid bilayers at very small scales (down to ∼200 nm here), with implications in fields such as biophysics, bioelectricity, biochemistry, and biosensing.

Layer‐by‐layer assembly and electrically controlled disassembly of water‐soluble Poly(3,4‐ethylenedioxythiophene) derivatives for bioelectronic interface

AbstractPoly(3,4‐ethylenedioxythiophene (PEDOT) derivatives display a multitude of attractive properties such as high conductivity, biocompatibility, ease of functionalization, and high thermal stability. As a result, they show promise for applications in materials and biomedical engineering. In order to increase their applications in the practical domain, trivial fabrication techniques are required. Here, we present a simple layer‐by‐layer dip methodology to assemble water‐soluble PEDOT derivatives that can then be disassembled via electrical stimulation. As a result, a dynamic PEDOT layered system is fabricated and could be applied as responsive materials for bioengineering. PEDOT‐SO3 and PEDOT‐NMe3 are synthesized via direct C‐H arylation polymerization and chemical polymerization, respectively. The electrostatic interactions between oppositely charged SO3− and NMe3+ enabled the stacking of PEDOT derivatives. The layer‐by‐layer assemblies are confirmed by ultraviolet–visible spectroscopy and profilometer. Morphological analyses are performed using scanning electron microscopy and atomic force microscopy, which revealed that the polymer coatings are uniform without any cracks. In situ material assembly is studied using quartz crystal microbalance, and we also demonstrate that these PEDOT‐derivative assemblies can be disintegrated by electrical stimulation. Cyclic voltammetry shows a proportional increase in stored charge density with the increase in bilayer thickness, confirming stable electroactivity of these assemblies. Using this approach, we can assemble conductive bio interface on both conductive and nonconductive surfaces, expanding the capability to fabricate bioelectronic electrodes.

Molecular Dynamics Simulations of Cholesterol Effects on the Interaction of hIAPP with Lipid Bilayer.

Fundamental understanding of specific interactions of human islet amyloid polypeptide (hIAPP) with cell membrane is critical for elucidating the underlying pathogenesis of type II diabetes mellitus (T2DM). Membrane cholesterol is known to regulate membrane functions and properties, but its exact role in driving hIAPP-membrane interactions still remains controversial. In this work, we computationally investigated the concentration effect of cholesterol on the adsorption, orientation, and surface interaction of hIAPP oligomers on POPC bilayers containing different amounts of cholesterol (χ = 0, 20, and 40 mol %). Collective MD simulations consistently showed that an increased cholesterol level modulated the structure and dynamics of POPC bilayer, leading to an increase of bilayer thickness, lipid packing order, and surface hydrophobicity but a decrease of lipid mobility. Cholesterol-induced bilayer changes further caused hIAPP oligomer to more preferentially bind to POPC bilayer in the presence of cholesterol via C-terminal residues, in contrast to weak or no binding of hIAPP oligomer on pure POPC bilayers. The cholesterol-enhanced hIAPP-membrane binding is mainly contributed by electrostatic interactions between C-terminal residues and lipid head groups, which may explain the rapid adsorption and aggregation of hIAPP in the presence of cholesterol in cell membranes. This computational work provides some insights into drug development and therapeutic strategies for T2DM by considering cholesterol effects.

Influence of External NaCl Salt on Membrane Rigidity of Neutral DOPC Vesicles.

Sodium chloride (NaCl) is a very common molecule in biotic and abiotic aqueous environments. In both cases, variation of ionic strength is inevitable. In addition to the osmotic variation posed by such perturbations, the question of whether the interactions of monovalent ions Na+ and Cl-, especially with the neutral head groups of phospholipid membranes are impactful enough to change the membrane rigidity, is still not entirely understood. We investigated the dynamics of 1,2-di-(octadecenoyl)-sn-glycero-3-phosphocholine (DOPC) vesicles with zwitterionic neutral head groups in the fluid phase with increasing external salt concentration. At higher salt concentrations, we observe an increase in bending rigidity from neutron spin echo (NSE) spectroscopy and an increase in bilayer thickness from small-angle X-ray scattering (SAXS). We compared different models to distinguish membrane undulations, lipid tail motions, and the translational diffusion of the vesicles. All of the models indicate an increase in bending rigidity by a factor of 1.3-3.6. We demonstrate that even down to t > 10 ns and for Q > 0.07 Å-1, the observed NSE relaxation spectra are influenced by translational diffusion of the vesicles. For t < 5 ns, the lipid tail motion dominates the intermediate dynamic structure factor. As the salt concentration increases, this contribution diminishes. We introduced a time-dependent analysis for the bending rigidity that highlights only a limited Zilman-Granek time window in which the rigidity is physically meaningful.

Transport and magnetic phenomena in ZnO-С thin-film heterostructures

Abstract ZnO- and C-based heterostructures were fabricated by the layer-by-layer deposition technique using the ion-beam sputtering process. Structure, electrical and magnetic properties of fabricated heterostructures are discussed. The two-phase (ZnO and C) films are evolved into a multilayer structure, consisting of amorphous carbon and crystalline ZnO layers when the bilayer thickness increases. When carbon is added to ZnO, its electrical resistivity reduces. The conduction mechanism changes from the variable-range hopping in a narrow energy band to the nearest neighbors hopping in ZnO–C films with a thickness of h

Liposome mimicking polymersomes; A comparative study of the merits of polymersomes in terms of formulation and stability

The past few decades have seen a significant rise in research into alternative polymer based nanosized unilamellar drug delivery systems, termed polymersomes. The reported benefits of polymersomes over the more traditional liposomes include increased stability, higher encapsulation efficacies, better adaptability and reduced water permeation due to an increased bilayer thickness. Together, these advantages render them suitable for a plethora of therapies. The work presented in this manuscript creates and compares four such drug delivery systems, two based on the traditional liposome and two prepared from amphiphilic polymers. From there we assess these systems in terms of size, stability, encapsulation efficiency, drug release, cellular toxicity and cellular uptake. We can confirm from this comprehensive investigation that the multi-functional synthetic polymersomes are undoubtedly a future contender in this expanding field of nanomedicines. Their ability to encapsulate a cocktail of different compounds, high stability as well as their ease of adaptability will ensure that they feature prominently in the future of advanced drug delivery systems.

Ordering of Saturated and Unsaturated Lipid Membranes near Their Phase Transitions Induced by an Amphiphilic Cyclodextrin and Cholesterol.

When inserted in membranes of dimyristoyl phosphatidylcholine (DMPC), methylated β-cyclodextrins with one (TrimβMLC) or two (TrimβDLC) lauryl acyl chains grafted onto the hydrophilic cavity exert a "cholesterol-like ordering effect", by straightening the acyl chains in the fluid phase at temperatures near the chain melting transition. This effect may be related to pretransitional events such as the "anomalous swelling" known to occur with saturated phosphatidylcholine membranes. To investigate this model, order profiles and bilayer thicknesses of DMPC and unsaturated 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) membranes containing amphiphilic cyclodextrins or cholesterol were determined by deuterium NMR. The pure lipid membranes display both a qualitatively similar chain ordering upon cooling in the fluid phase, more important at the chain extremity, which gets more pronounced near their fluid-to-gel transitions. Both membranes show a bilayer thickness increase by ∼0.5 Å just above their transition, as observed previously with saturated phosphatidylcholines of various chain lengths. Membrane-insertion of 5% TrimβMLC or cholesterol induces an important ordering of the DMPC acyl chains just above the transition, which is also more pronounced at the chain extremity. There is an additional increase of the bilayer thickness, most probably due to a deep insertion of these amphiphilic molecules, facilitated by increased bilayer softness in the anomalous swelling regime. These effects are more important with TrimβMLC than with cholesterol. By contrast, no enhanced acyl chain ordering was observed when approaching the transition of TrimβMLC-containing POPC membranes, as a possible consequence of an eventual lack of anomalous swelling in unsaturated lipid membranes. Insertion of higher concentrations of TrimβMLC was found to induce a magnetic orientation of the DMPC membranes in the fluid phase with 10% of this derivative, coupled with the appearance of a broad isotropic component when the concentration is raised to 20%. No membrane orientation or isotropic component was detected with TrimβMLC-containing POPC membranes.

Role of lipid composition on the structural and mechanical features of axonal membranes: a molecular simulation study

The integrity of cellular membranes is critical for the functionality of axons. Failure of the axonal membranes (plasma membrane and/or myelin sheath) can be the origin of neurological diseases. The two membranes differ in the content of sphingomyelin and galactosylceramide lipids. We investigate the relation between lipid content and bilayer structural-mechanical properties, to better understand the dependency of membrane properties on lipid composition. A sphingomyelin/phospholipid/cholesterol bilayer is used to mimic a plasma membrane and a galactosylceramide/phospholipid/cholesterol bilayer to mimic a myelin sheath. Molecular dynamics simulations are performed at atomistic and coarse-grained levels to characterize the bilayers at equilibrium and under deformation. For comparison, simulations of phospholipid and phospholipid/cholesterol bilayers are also performed. The results clearly show that the bilayer biomechanical and structural features depend on the lipid composition, independent of the molecular models. Both galactosylceramide or sphingomyelin lipids increase the order of aliphatic tails and resistance to water penetration. Having 30% galactosylceramide increases the bilayers stiffness. Galactosylceramide lipids pack together via sugar-sugar interactions and hydrogen-bond phosphocholine with a correlated increase of bilayer thickness. Our findings provide a molecular insight on role of lipid content in natural membranes.