Incomplete Transformation Research Articles

Istihalah and Its Impacts on Food According to the Islamic Perspective

Issues related to istihalah (transformation) are not only limited to matters of food and drink, but they are also concerned with the purity rulings of a human-need product in Islam. Nevertheless, this matter becomes more prevalent today when science and technology move forward swiftly with the latest diverse products. It has dramatically shifted the original form of food production through modern biotechnology methods, mixing ingredients from animal sources in food until it alters its original properties to new physical features such as cake, cultured meat, and genetically modified food. Following the realisation of the extensive mixing of halal and haram ingredients, the contemporary fatwa is being discussed among scholars in the food and beverage industry. Therefore, this research aimed to examine the process of istihalah that takes place, which can be categorised as istihalah tammah (perfect transformation) or istihalah naqisah (incomplete transformation), as well as explore the impacts on food that has gone through the process of istihalah. Next, the study also intended to examine the rulings of food that change in terms of properties, taste, smell, colour, physicality, and chemistry. The statements of fiqh scholars have been quoted and studied to address this concern. The analysis used a qualitative method by collecting sources from the Quran and Sunnah and the ijtihad of scholars obtained from reading such books as fiqh, food science, and websites. Ultimately, the study data substantiated that the process of istihalah is permissible in Islam if it is istihalah tammah and totally met. Nonetheless, deciding the halal status of a food product that has gone through istihalah is tricky because the PCR process in the laboratory needs to be done to confirm that the study results are authentic.

Effect of Initial Intergranular Ferrite Size on Induction Hardening Microstructure of Microalloyed Steel 38MnVS6

In this study, we investigated the effect of grain size of an initial microstructure (pearlite + ferrite) on a resulting microstructure of induction-hardened microalloyed steel 38MnVS6, which is one topical medium carbon vanadium microalloyed non-quenched and tempered steel used in manufacturing crankshafts for high-power engines. The results show that a coarse initial microstructure could contribute to the incomplete transformation of pearlite + ferrite into austenite in reaustenitization transformation by rapid heating, and the undissolved ferrite remains and locates between the neighboring prior austenite grains after the induction-hardening process. As the coarseness level of the initial microstructure increases from 102 μm to 156 μm, the morphology of undissolved ferrite varies as granule, film, semi-network, and network, in sequence. The undissolved ferrite structures have a thickness of 250–500 nm and appear dark under an optical metallographic view field. To achieve better engineering applications, it is not recommended to eliminate the undissolved ferrite by increasing much heating time for samples with coarser initial microstructures. It is better to achieve a fine original microstructure before the induction-hardening process. For example, microalloying addition of vanadium and titanium plays a role of metallurgical grain refinement via intragranular ferrite nucleation on more sites, and the heating temperature and time of the forging process should be strictly controlled to ensure the existence of fine prior austenite grains before subsequent isothermal phase transformation to pearlite + ferrite.

Photocatalytic activity of self-heterojunctioned intermediate phases in HCl protonated and HNO3 deconjugated g-C3N4 nanostructures

This research involved the different acid-treatment conditions of graphitic carbon nitride and its modified nanostructures through thermal polycondensation of urea at various temperatures. X-ray diffraction patterns revealed that processing at a lower temperature than 500 °C resulted in melem and its derivatives, indicating incomplete transformation of urea to g-C3N4. However, treatment at higher temperatures and the HCl acid treatment led to the formation and expansion of g-C3N4 networks, as evidenced by notable differences in peak intensities observed in their Fourier-transform infrared and Raman spectra. Scanning electron microscopy analysis illustrated a transition from the granular morphology of melamine to the layered structure characteristic of g-C3N4. The nanoparticle morphology observed in the HNO3 acid treatment sample was attributed to the deconjugation of nanosheets through the highly oxidative acid medium. The most suitable photocatalytic activity for Methylene Blue (MB) degradation under UV and visible light illumination was observed for the samples prepared at 550 °C and HCl post-processed nanostructures. It is proposed that the enhanced photocatalytic activity observed in these samples is most likely attributed to the reduced recombination of photogenerated charge carriers facilitated by heterojunctions formed between different intermediate phases. These findings highlight the potential of modified g-C3N4 and its derivatives as promising photocatalytic materials for water purification applications.

Impact of magnetic, atomic and microstructural ordering on the magnetocaloric performance of powdered NiCoMnSn metamagnetic shape memory ribbons

Co-doped NiMnSn Heusler-type metamagnetic shape memory alloys (MMSMAs) are promising materials for the next-generation solid-state refrigeration systems due to their excellent magnetocaloric performance around the martensitic transformation, which is easily tuneable by slight changes in the alloy composition. An improvement in the thermal efficiency of active magnetic regenerator devices, a key element in magnetocaloric cooling systems, arises by obtaining powdered magnetocaloric alloys that meet technical requirements for their implementation as a feedstock material in the additive manufacturing of 3D-printed heat exchangers. In the present work, powders of Mn-rich NiCoMnSn Heusler-type MMSMAs were obtained from their ribbon form avoiding or minimizing residual stresses, the number of defects and disorder in the crystal lattice and microstructure. Since atomic order and crystallographic structure are crucial in the transformation and magnetic properties of these alloys, a complementary structural analysis of the powders after different heat treatments was performed by powder neutron diffraction. The results show that the cubic austenitic phase of the non-heat-treated melt-spun powder exhibits a highly stressed structure, which leads to an incomplete martensitic transformation and, therefore, to the coexistence of martensitic and austenitic phases at low temperatures. The magnetic structure of the austenite phase was also determined by neutron powder diffraction, obtaining a ferromagnetic coupling between 4a and 4b Wyckoff positions in the samples analysed. It was found that a heat treatment facilitates the martensitic transformation and enables the formation of a pure martensitic phase.The observed changes in the magnetocaloric performance of the powders have been understood in terms of the differently stressed structures and their impact on the martensitic transformation. A fully completed structural transformation leads to a significant increase of the magnetisation change across the martensitic transformation and, consequently, to high values of both a magnetic field induced isothermal entropy change and refrigeration capacity.

Abnormal martensitic transformation and morphology induced by chemical heterogeneity in additively manufactured maraging steel

We report on the effect of chemical heterogeneity on martensitic transformation in a maraging steel produced through laser-based directed energy deposition. Unlike conventional maraging steels with lath martensitic microstructures, the maraging steel exhibited an abnormal morphology, which was refined and elongated in the building direction. The growth direction of the abnormal lath martensite did not occur along the habit plane, while the lath martensite morphology corresponded to the cellular dendritic microstructure of the maraging steel. Among the elements partitioned to the interdendritic region, Ni played a major role in the reduction of the martensitic transformation start temperature (Ms temperature), thereby interfering with the martensitic transformation across the interdendritic region. The interdendritic region acted as a new domain boundary of martensitic transformation, where incomplete martensitic transformation in the region resulted in the retention of austenite.

A one‐dimensional phenomenological constitutive model of shape memory alloys considering the cyclic degradation of two‐way memory effect

AbstractThis study introduces a one‐dimensional phenomenological constitutive model designed to describe two‐way shape memory effect (TWSME) and its associated cyclic degradation. The model utilizes the logistic function to formulate the phase transformation equation, incorporates the expansion of key parameters into their respective fatigue functions to characterize the fatigue phenomenon, and integrates a phase transformation rate regulation function into the differential form of the phase transformation equation. This integration facilitates the control over the entire phase transformation process and the simulation of incomplete transformations. The model is distinguished by its comprehensive functionality, simple form, ease of calculation, and the clear and direct influence of key parameters. Furthermore, it offers a degree of flexibility because each function within the framework is replaceable. The simulation of the TWSME strain and recovery stress hysteresis loop deformation has been successfully conducted, enabling the description of internal hysteresis loops caused by incomplete transformation. The validity of the model is corroborated by comparing it with existing experimental results.

Effects of carbon concentration and transformation temperature on incomplete transformation and crystallography of low-carbon bainitic steel

A close relationship exists between the crystallographic characteristics of a bainitic matrix and formation of martensite/austenite (M/A) constituents. In this work, the isothermal transformation kinetics and crystallographic characteristics of low-carbon bainitic (LCB) steel were investigated to elucidate the formation mechanism of M/A constituents and twin-related V1/V2 variant pairs (Σ3 boundaries). The formation of M/A constituents depends on the bainitic transformation kinetics, which are influenced by the carbon concentration and isothermal temperature. An increase in the carbon concentration or transformation temperature promotes the formation of blocky M/A constituents by increasing the activation energy of the grain boundary and autocatalytic nucleation processes. In addition, increasing the carbon concentration or lowering the transformation temperature increases the strength of the austenite phase and promotes autocatalytic nucleation, thereby producing more twin-related V1/V2 variant pairs. Therefore, the increase in the carbon concentration increases the number of twin-related V1/V2 variant pairs while also causing the formation of blocky M/A constituents. To overcome this limitation, a novel heat treatment process design is proposed that can significantly eliminate blocky M/A constituents and generate high-density twin-related V1/V2 variant pairs.

Role of vimentin in the morphogenesis of endometrial decidualization during pregnancy with IVF methods

BACKGROUND: Early reproductive loss is a complex problem, the solution of which requires a systematic approach to the study of the morphogenesis of gravid transformation. Violations of the morphofunctional characteristics of the endometrium are associated with chronic endometritis, which entails implantation pathology and the development of pregnancy, while formulating indications for the use of IVF methods. Chronic endometritis disrupts the differentiation of stromal cells and intermediate filaments with subsequent pathology of decidualization and gravid transformation. AIM: The aim of this study was to evaluate vimentin expression in decidual cells of the gravid endometrium in an undeveloped first-trimester pregnancy after IVF, depending on its transformation in patients with chronic endometritis. MATERIALS AND METHODS: Histological and immunohistochemical studies were performed on 40 samples of abortion material with normal chorionic villi karyotype from a non-developing pregnancy after IVF in patients with chronic endometritis and 15 samples of abortion material from a progressive pregnancy, surgically terminated at the woman’s request at similar terms. Two groups were formed — I group with a full-fledged gravid transformation in a non-developing pregnancy after IVF (n = 20) and II group with an incomplete gravid transformation in a non-developing pregnancy after IVF (n = 20). Histological examination was performed according to the standard procedure. Immunohistochemical study was performed using a one-step protocol with antigen unmasking. Primary monoclonal antibodies to vimentin (Clon V9, Diagnostic BioSystems Inc., Spain) were used at a 1 : 1000 dilution. Vimentin expression was evaluated in the compact layer of the gravid endometrium. RESULTS: A full-fledged gravid transformation of the endometrial stroma in the abortion material in study group I and the control group was represented by mature deciduocytes of the epithelioid type, round or polygonal in shape, with a light vesicular nucleus. With an incomplete gravid transformation, the compact layer of the gravid endometrium was represented by fibroblasts with varying degrees of cytoplasmic development, from mild changes to the formation of pre-decidual and immature decidual cells. A decrease in vimentin expression was verified in the gravid endometrium after IVF compared to the control group. In case of an incomplete gravid transformation, a decrease in vimentin expression was also verified compared to the control group and study group I. CONCLUSIONS: The presence of chronic endometritis in patients with infertility and chronic endometritis not only causes pathology of the original endometrium, but also disrupts decidualization, leading to reproductive loss with normal embryo karyotype.

A Survey of Polynomial Multiplications for Lattice-Based Cryptosystems

We survey various mathematical tools used in software works multiplying polynomials in ℤ q [ x ] ⟨ x n − α x − β ⟩ . In particular, we survey implementation works targeting polynomial multiplications in lattice-based cryptosystems Dilithium, Kyber, NTRU, NTRU Prime, and Saber with instruction set architectures/extensions Armv7-M, Armv7E-M, Armv8-A, and AVX2. There are three emphases in this paper: (i) modular arithmetic, (ii) homomorphisms, and (iii) vectorization. For modular arithmetic, we survey Montgomery, Barrett, and Plantard multiplications. For homomorphisms, we survey (a) various homomorphisms such as Cooley–Tukey FFT, Good–Thomas FFT, Bruun's FFT, Rader's FFT, Karatsuba, and Toom–Cook; (b) various algebraic techniques for adjoining nice properties to the coefficient rings, including localization, Schönhage's FFT, Nussbaumer's FFT, and coefficient ring switching; and (c) various algebraic techniques related to the polynomial moduli, including twisting, composed multiplication, evaluation at ∞ , truncation, incomplete transformation, striding, and Toeplitz matrix-vector product. For vectorization, we survey the relations between homomorphisms and vector arithmetic. We then go through several case studies: We compare the implementations of modular multiplications used in Dilithium and Kyber, explain how the matrix-to-vector structure was exploited in Saber, and review the design choices of transformations for NTRU and NTRU Prime with vectorization. Finally, we outline several interesting implementation projects.

Nucleation Stages Onset and Intra-granular Ferrite Morphologies in Titanium Free Micro-Alloyed Steel

The aim of this work is focused on nucleation stages with emphasis on the development of intra-granular ferrite morphologies during isothermal austenite transformation in titanium free micro-alloyed steel. Isothermal treatment was carried out in the temperature range 350 to 600οC. These treatments were interrupted at different times between 2 and 1800 s in order to analyze the evolution of the microstructure. Metallographic evaluation was done by using optical and scanning electron microscopy (SEM) enabled determination of the nucleation onset at all treatments and subsequent on the development of intra-granular ferrite of isothermally treated Ti free micro-alloyed steel. The results show that at high temperatures ( 500  C) polygonal intra-granularly nucleated ferrite idiomorphs, combined with grain boundary ferrite and pearlite were produced and followed by an incomplete transformation phenomenon, At intermediate temperatures (450 and 500  C) an interlocked acicular ferrite (AF) microstructure is produced, and at low temperatures (400 and 350  C) the sheave of parallel acicular ferrite plates, similar to bainitic sheaves but intra-granularly nucleated were observed. In addition to sheaf type acicular ferrite, the grain boundary nucleated bainitic sheaves are observed.

Effect of kopyor coconut water on early-onset preeclampsia-like impairments in rats induced by L-nitro-arginine methyl ester

Preeclampsia (PE) is a severe pregnancy disorder posing significant health risks to both the mother and the fetus without available preventive measures or treatments. More specifically, the main pathological feature of early-onset PE (EO-PE) is the incomplete transformation of the spiral artery. Meanwhile, aspirin has proven effective for the treatment and prevention of PE. Previous studies indicated a relationship between the phytochemical compound of kopyor coconut water (KCW) and nutritional treatment for PE. Therefore, the objective of this study was to determine the efficacy of KCW as a potential preventive treatment for PE. An experimental laboratory method was used with pre-test and post-test control group designs. The samples comprised 35 pregnant Wistar rats, divided into five groups with seven members each. Rats were then randomized into control and groups exposed to L-NAME, L-NAME and aspirin, L-NAME and KCW 2 ml/200 gBW, as well as L-Name and KCW 2 ml/200 gBW for GD4 to 19. The results showed that after administering L-NAME to induce EO-PE, mean arterial pressure (MAP), proteinuria, placental hypoxia, oxidative stress, and endothelial dysfunction decreased due to KCW nutritional treatment. Specifically, KCW nutrition prevented the uterine spiral artery from expanding and reduced the number of neutrophils. The decreased survival rate caused by L-NAME-induced PE was reversed by providing KCW nutrition. Moreover, results indicated that KCW was a potential alternative for the prevention and treatment of EO-PE even at doses of 2 or 3 ml/200 gBW, offering insights for the community and clinical practitioners in treating PE as a therapeutic option.

Challenging gender stereotypes: representations of gender through social interactions in English learning textbooks

This study explores the representation of gender through the social interactions presented in four sets of English textbooks used in China. By examining the representation of both gender stereotypes and changing roles, the results reveal that although traditional stereotypes exist in Chinese secondary school-level English textbooks, women’s changing social roles are acknowledged in that they are now beginning to be shown engaging in non-traditional female jobs. However, in family scenarios, women are still depicted as taking sole responsibility for housekeeping duties without any participation from adult males, showing the incomplete transformation of gender roles. No male characters are shown participating in non-traditional jobs, which reinforces the idea of the masculine role being ‘superior’ to feminine or non-masculine roles. The continued presence of gender stereotypes shows textbook editors’ tacit agreement with the gender norms. Drawing on gender as a fluid concept and social interactions of gender, this study acknowledges the variety and diversity of inputs of gender roles through social interactions in the learning community and suggests that students can be given access to a more gender-progressive education by improving the quality of social interactions between genders in textbooks and presenting a more equal view on gender roles.

Expanded Stability of Layered SnSe-PbSe Alloys and Evidence of Displacive Phase Transformation from Rocksalt in Heteroepitaxial Thin Films.

Bulk PbSnSe has a two-phase region, or miscibility gap, as the crystal changes from a van der Waals-bonded orthorhombic 2D layered structure in SnSe-rich compositions to the related 3D-bonded rocksalt structure in PbSe-rich compositions. This structural transition drives a large contrast in the electrical, optical, and thermal properties. We realize low temperature direct growth of epitaxial PbSnSe thin films on GaAs via molecular beam epitaxy using an in situ PbSe surface treatment and show a significantly reduced two-phase region by stabilizing the Pnma layered structure out to Pb0.45Sn0.55Se, beyond the bulk limit around Pb0.25Sn0.75Se at low temperatures. Pushing further, we directly access metastable two-phase films of layered and rocksalt grains that are nearly identical in composition around Pb0.50Sn0.50Se and entirely circumvent the miscibility gap. We present microstructural and compositional evidence for an incomplete displacive transformation from a rocksalt to layered structure in these films, which we speculate occurs during the sample cooling to room temperature after synthesis. In situ temperature-cycling experiments on a Pb0.58Sn0.42Se rocksalt film reproduce characteristic attributes of a displacive transition and show a modulation in electronic properties. We find well-defined orientation relationships between the phases formed and reveal unconventional strain relief mechanisms involved in the crystal structure transformation using transmission electron microscopy. Overall, our work adds a scalable thin film integration route to harness the dramatic contrast in material properties in PbSnSe across a potentially ultrafast crystalline-crystalline structural transition.

Effect of applied stress on bainite transformation, microstructure, and properties of 15CrMo steel

The effect of external stress on the isothermal bainite transformation kinetics and microstructure of 15CrMo steel was studied using dilatometer, optical microscopes (OM), electron back-scatter diffraction (EBSD), scanning electron microscopes (SEM) and X-ray diffraction (XRD). The results show that the additional mechanical driving force provided by the external stress promotes the transformation of bainite, resulting an increase volume fraction of bainite-ferrite (BF) and causing the BF laths to become slender. The application of external stress can also induce selective orientation during the bainite transformation process, and the orientation relationship between the prior austenite and the BF under stress is closer to the Kurdjumov-Sachs (K-S) relationship. There is also an incomplete transformation of bainite transformation under stress. At the same time, the Vickers hardness of 15CrMo steel would increase after applying external stress. The mechanical driving forces calculations demonstrate that when tensile stress and compressive stress are of similar magnitudes, they provide comparable mechanical driving forces. As a result, they exert similar effects on the kinetics of bainite transformation, leading to no discernible differences in the resulting bainite microstructure.

Ordovician (Cenerian) metamorphism in the Western Carpathians: Evidence from EMP monazite dating of polymetamorphosed granitoids in the Veporic unit, Slovakia

Late Ediacaran to Cambrian metagranitoids from the northern Veporic unit of the Western Carpathians show imprints of three metamorphic events, which can be assigned to the Cenerian, Variscan, and Alpine orogenies based on electron microprobe dating of monazite. Metamorphic monazites in the metagranitoids are mostly of the Lower to Middle Ordovician age (480–460 Ma). The Ordovician monazite formed in equilibrium with the metamorphic assemblage garnet, biotite, kyanite, ilmenite and quartz at P-T conditions of 6–7 kbar and 550–570 °C, thus providing clear evidence for Cenerian metamorphism in the Western Carpathians. Variscan metamorphism caused minor monazite growth/recrystallization at 364 ± 13 Ma and produced a new mineral assemblage garnet, kyanite, rutile and phengite at P-T conditions of 20–22 kbar and 670–690 °C. The low-grade Alpine metamorphism is recorded by monazite of Cretaceous age (96 ± 23 Ma), but only in orthogneiss of extremely low-Ca composition.The Veporic metagranitoids show incomplete transformation from magmatic stage, still preserving remnants of plagioclase, K-feldspar and high-Ti biotite. This indicates that the metagranitoids remained relatively dry and failed to complete metamorphic reactions due to kinetic factors at fluid-deficient conditions. Nevertheless, the metagranitoids likely underwent significant geochemical changes during their metamorphic evolution including a severe loss of CaO and Na2O.

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel

In this study, we investigated the effects of acicular ferrite (AF) on the crystallographic and incomplete transformation characteristics of low-carbon low-alloy steel. Intermediate annealing after austenitization induced a transformation yielding AFs, accelerating the isothermal transformation kinetics and regulating the microstructure. This process formed highly dense packet grain boundaries and improved the stability of untransformed austenite. AF formation increased the number of packet interfaces, increasing the crack propagation energy. The reduction and refinement of martensite/austenite (M/A) islands increased the crack nucleation energy. A displacive model was used to fit the transformation kinetics curve, indicating the significant effect of the nucleation rate on the isothermal transformation of the experimental steel at 450, 475, and 500 °C. The findings of this study indicate that nucleation regulation can accelerate transformation kinetics to strengthen and toughen bainitic structures.

Research on the Innovative Development of Chinese Music Education in the Context of the New Era

With the changes in education policies, music education in China is playing an increasingly important role in schools. Music education plays an important role in realizing the all-round development of students' morality, intelligence, physical fitness, art and labor. However, in the past, people's understanding of music education was limited to traditional teaching, which led to problems such as incomplete transformation of music models, single teaching content, and disconnection between home and school. This paper studies and considers these issues and puts forward the following suggestions. This paper argues that schools should conform to the "new liberal arts" education concept and integrate music education and new liberal arts construction. At the same time, teachers should pay attention to establishing a multicultural education concept, innovating teaching models, and enhancing students' interest in learning Xi. Schools and parents should pay attention to the realization of home-school co-education and cultivate students' musical outlook and musical aesthetic ability.

Frictional shear stress-induced incomplete martensitic transformation in mono-crystalline B2-CuZr spherulites

An austenitic B2-CuZr phase, when deformed, can undergo a martensitic transformation (MT) that produces a martensitic B19′-CuZr phase, resulting in remarkable transformation-induced plasticity (TRIP) and shape memory effects in B2-structured alloys. However, the shear mechanism as well as the crystallographic characteristics, which underlie the MT and, in turn, the TRIP and shape memory effects, remain unclear and somewhat controversial. Here we report that a single shear on {110}B2<001>B2, along with {1 1 5.5}B2 being the habit plane, are responsible for the MT in B2-CuZr, where {110}B2 and <001>B2 are the shear plane and the shear direction, respectively. These were revealed by determining unambiguously the orientation relationship between B2 and B19′, co-existing in individual spherulites contained in a B2-CuZr-containing bulk metal glass-matrix composite (BMGC). This exotic microstructure, featuring a core-shell like distribution in each single spherulite in which all the 12 possible martensite (B19′) variants constitute the core and the parent B2 forms the shell, was made from an incomplete MT in originally mono-crystalline B2 spherulites of the as-cast BMGC when subjected to moderately applied frictional shear stresses upon mechanical grinding. Finite element analysis suggests that a core-shell like shear stress distribution inside a B2 spherulite, caused by the confinement of the stiffer glass matrix, may account for it. These results provide direct experimental evidence to elucidate the B2→B19′ MT and its variant selections under various stress states, and pave the way for developing ductile B2-structured alloys, including but not limited to, shape memory intermetallics, high entropy alloys and B2-containing composite materials.

Melatonin levels and fetal growth restriction: Clinical insights and analytical approaches

Fetal growth restriction is a prevalent complication of pregnancy. Fetal growth restriction entails the pathological restriction of fetal growth, leading to heightened perinatal risks. Placental histopathology in fetal growth restriction typically involves incomplete invasion and transformation of spiral arteries, as well as impaired uteroplacental blood flow. Often, fetal growth restriction is comorbid with preeclampsia. Several theories propose the beneficial role of melatonin in reducing fetal growth restriction and preeclampsia. Studies suggest that melatonin may enhance neoangiogenesis and oxygenation, crucial processes in pregnancy. Melatonin’s expression throughout pregnancy in the human placenta underscores its importance in placental function and pregnancy outcomes. This research aims to study clinical and anamnestic data in women with fetal growth restriction compared to a control group and analyze urinary melatonin levels in both groups. The study, conducted between 2018 and 2021, included 66 pregnant women (34 with fetal growth restriction, 32 controls). Enzyme immunoassay of urine revealed significantly lower melatonin levels in the fetal growth restriction group compared to controls. In conclusion, fetal growth restriction remains a significant challenge, warranting new therapeutic approaches. Lower urinary melatonin levels in fetal growth restriction patients suggest its potential role in disease pathogenesis. Further research into melatonin’s mechanisms and therapeutic applications is essential for preventing or mitigating fetal growth restriction’s clinical manifestations.

ГЛОБАЛЬНІ ТЕНДЕНЦІЇ РОЗВИТКУ СВІТОВОЇ ЕКОНОМІКИ В УМОВАХ ЦИФРОВІЗАЦІЇ: ЕКОЛОГІЧНИЙ АСПЕКТ

The article examines the current trends in the development of the world economy. The influence of digitalization of the economy on the formation of greening policy as an important tool for the transition to a model of sustainable development in the face of global challenges is studied. The essence of greening is defined, its impact on the formation of prerequisites for sustainable development is characterized. It is emphasized that greening sets the task of reducing the impact of economic activity of enterprises on the environment, including reducing energy consumption and use of natural resources. It is indicated that digital technologies can help to use resources more efficiently, which will contribute to environmental sustainability. It is emphasized that the use of green technologies and renewable energy sources can help reduce emissions of greenhouse gases and other pollutants. It is noted that an important element of greening is the transition to sustainable production, which takes into account environmental aspects in all stages of the production process. It is emphasized that IoT (Internet of Things) systems and sensors can be used to monitor the state of the environment and environmental indicators. It has been proven that the development of environmentally friendly computing technologies allows enterprises to reduce energy consumption. Digital technologies can reduce the use of paper and facilitate efficient records management, thereby reducing the negative impact on the environment. An effective combination of digitalization and environmentalization will contribute to the creation of a sustainable and efficient society. The peculiarities of transformational economic systems and the problems of choosing a model of state policy in the environmental sphere are revealed. The system of restrictions for effective greening in the conditions of incomplete transformations is revealed, and its strategic importance is characterized. The role of greening in ensuring «green transformations» and the formation of the «green economy» sector under the influence of digitalization is considered. The need to find opportunities for the formation of greening mechanisms based on the principles of integration into economic development mechanisms, taking into account the digitalization of the economy, is substantiated. It was concluded that the development of the world economy should be based on taking into account and balancing the technological, social and ecological components of the world economic mechanism, where digital technologies have a significant impact on the world ecosystem.