Incoherent Mode Research Articles

Behavior of the Position and Ellipticity Angles at Polarization Mode Transitions in Pulsar Radio Emission

Polarization observations of radio pulsars show that abrupt transitions in the polarization vector’s position angle can be accompanied by large excursions in the vector’s ellipticity angle, suggesting the vector passes near the right or left circular pole of the Poincaré sphere. The behavior of the angles can be explained by a transition in dominance of the orthogonal polarization modes or a vector rotation caused by a change in the phase difference between the modes. Four polarization models are examined to quantify and understand the behavior of the angles at a mode transition: coherent polarization modes, partially coherent modes, incoherent modes with nonorthogonal polarization vectors, and incoherent orthogonal modes with an elliptically polarized emission component. In all four models, the trajectory of the mode transition on the Poincaré sphere follows the geodesic that connects the orientations of the mode polarization vectors. The results from the models can be similar, indicating that the interpretation of an observed transition within the context of a particular model is not necessarily unique. The polarization fraction of the emission and the average ellipticity angle depend upon the statistical character of the mode intensity fluctuations. The polarization fraction increases as the fluctuations increase. The excursion in ellipticity angle can be large when the mode intensities are quasi-stable and is suppressed when the intensity fluctuations are large.

Wavelength-multiplexed multi-mode EUV reflection ptychography based on automatic differentiation

Ptychographic extreme ultraviolet (EUV) diffractive imaging has emerged as a promising candidate for the next generationmetrology solutions in the semiconductor industry, as it can image wafer samples in reflection geometry at the nanoscale. This technique has surged attention recently, owing to the significant progress in high-harmonic generation (HHG) EUV sources and advancements in both hardware and software for computation. In this study, a novel algorithm is introduced and tested, which enables wavelength-multiplexed reconstruction that enhances the measurement throughput and introduces data diversity, allowing the accurate characterisation of sample structures. To tackle the inherent instabilities of the HHG source, a modal approach was adopted, which represents the cross-density function of the illumination by a series of mutually incoherent and independent spatial modes. The proposed algorithm was implemented on a mainstream machine learning platform, which leverages automatic differentiation to manage the drastic growth in model complexity and expedites the computation using GPU acceleration. By optimising over 200 million parameters, we demonstrate the algorithm's capacity to accommodate experimental uncertainties and achieve a resolution approaching the diffraction limit in reflection geometry. The reconstruction of wafer samples with 20-nm high patterned gold structures on a silicon substrate highlights our ability to handle complex physical interrelations involving a multitude of parameters. These results establish ptychography as an efficient and accurate metrology tool.

Prominent phonon transmission across aperiodic superlattice through coherent mode-conversion

In both particle and wave descriptions of phonons, the dense, aperiodically arranged interfaces in aperiodic superlattices are expected to strongly attenuate thermal transport due to phonon-interface scattering or broken long-range coherence. However, non-trivial thermal conductivity is still observed in these structures. In this study, we reveal that incoherent modes propagating in the aperiodic superlattice can be converted, through interference, into coherent modes defined by an approximate dispersion relation. This conversion leads to high transmission across the aperiodic superlattice structure, which contains hundreds of interfaces, ultimately resulting in non-trivial thermal conductivity. Such incoherent-to-coherent mode-conversion behavior is extensively observed in periodic superlattices. This work suggests an effective strategy to manipulate the phonon dispersion relation through layer patterning or material choice, enabling precise control of phonon transmission across aperiodic superlattices.

An algorithm for incoherent reception and processing of a multiplexed TMBOC-signal at a single intermediate frequency

Problem statement. A promising direction for the development of the global navigation satellite system is the creation of new types of signals with code separation. High availability and accuracy of consumer location determination refer to signals having an autocorrelation function with a narrow main peak and a low level of side lobes. One of the types of such signals is promising multiplexed TMBOC signals. But the processing of this signal has not been fully studied, namely, signal processing with TMBOC modulation in an incoherent reception mode. Purpose. Synthesis of an algorithm for incoherent reception and processing of a multiplexed TMBOC signal at a single intermediate frequency. Results. Analytical expressions are obtained for the output voltages of the discriminators of the frequency tracking system and the delay tracking system. The schemes of discriminators of the frequency tracking system and the delay tracking system are obtained. Practical significance. The results can be used by specialists in the field of satellite radio navigation in the modernization of global navigation satellite systems.

Regulatory properties of transcription factors with diverse mechanistic function.

Transcription factors (TFs) regulate the process of transcription through the modulation of different kinetic steps. Although models can often describe the observed transcriptional output of a measured gene, predicting a TFs role on a given promoter requires an understanding of how the TF alters each step of the transcription process. In this work, we use a simple model of transcription to assess the role of promoter identity, and the degree to which TFs alter binding of RNAP (stabilization) and initiation of transcription (acceleration) on three primary characteristics: the range of steady-state regulation, cell-to-cell variability in expression, and the dynamic response time of a regulated gene. We find that steady state regulation and the response time of a gene behave uniquely for TFs that regulate incoherently, i.e that speed up one step but slow the other. We also find that incoherent TFs have dynamic implications, with one type of incoherent mode configuring the promoter to respond more slowly at intermediate TF concentrations. We also demonstrate that the noise of gene expression for these TFs is sensitive to promoter strength, with a distinct non-monotonic profile that is apparent under stronger promoters. Taken together, our work uncovers the coupling between promoters and TF regulatory modes with implications for understanding natural promoters and engineering synthetic gene circuits with desired expression properties.

Time sequence variation of incoherent and coherent random laser based on positive replica of abalone shell

Besides the scattering structures, the energy transfer (ET) process in the gain medium plays a significant role in the competition between coherent (comprising strongly coherent components) and incoherent (consisting of weakly coherent or “hidden” coherent components) modes of random lasers. In this study, bichromatic emission random lasers were successfully created using polydimethylsiloxane (PDMS) replicas with grooved structures that imitate the inner surface of abalone shells as scattering substrates. The influence mechanism of the ET process from the monomer to dimer in the Rhodamine 640 dye on the competition of random laser modes was thoroughly investigated from both spectral and temporal dimensions. It was confirmed that the ET process can reduce the gain of monomers while amplifying the gain of dimers. By considering the dominant high-efficiency ET processes, an energy transfer factor associated with the pump energy density was determined. Notably, for the first time, it was validated that the statistical distribution characteristics of the time sequence variations in the coherent random laser generated by dimers closely resemble a normal distribution. This finding demonstrates the feasibility of producing high-quality random number sequences.

Comparison of the Laser Generation Parameters in the Coherent and in the Standard Incoherent Passive Mode Locking Regime

Comparison of the Laser Generation Parameters in the Coherent and in the Standard Incoherent Passive Mode Locking Regime

A Laser with Intracavity Spectral Beam Combining with Continuous-Wave and Pulse-Periodic Pumping of Various Lasing Channels

The output spectral, temporal, and spatial parameters of a two-channel Yb-fiber laser operating in an incoherent intracavity spectral beam-combining mode were investigated. One of the laser channels operated in continuous pumping mode, and the second channel operated in pulse-periodic pumping mode with a pulse duration of microseconds. When the channels operated separately, continuous lasing at a wavelength of λ1 was observed in one channel, and pulsed lasing at a wavelength of λ2 was observed in the other. When both channels operated simultaneously, it was shown that during the pump pulse action, the laser switched operation to pulsed collective mode lasing at a wavelength of (λ1 + λ2)/2. Lasing at wavelengths λ1 and λ2 was not observed at this time.

Chaotic-cavity surface-emitting lasers for optical wireless communication and low-speckle illumination

Though necessary and advantageous in many fields, the high coherence of lasers is detrimental to their performance in certain applications, including illumination, imaging, and projection. This is due to the formation of coherence artifacts, commonly known as speckles, resulting from the interference of randomly scattering spatially coherent photons. It is possible to resolve this issue by increasing the number of mutually incoherent modes emitted from the laser. In vertical-cavity surface-emitting lasers (VCSELs), this can be performed by designing them to have chaotic cavities. This paves the way toward their use in simultaneous illumination and communication scenarios. Herein, we show that chaotic-cavity broad-area VCSELs can achieve significantly broader modulation bandwidths (up to 5 GHz) and higher data rates (up to 12.6 GB/s) compared to other low-coherence light sources, with a lower speckle contrast. We further report a novel technique for lowering the speckle contrast by carefully designing the AC signal used for communication. We show that the apparent spatial coherence is dramatically decreased by inserting a short chirp signal between symbols. Using this method with a chaotic-cavity VCSEL, the number of apparent modes can be up to 450, compared to 88 modes measured from a conventional broad-area VCSEL (a fivefold increase). In light of the recent advances in visible-light VCSELs, this work shows the potential of low-coherence surface-emitting lasers (LCSELs) in simultaneous illumination and optical wireless communication systems since they combine the high speed of lasers with the excellent illumination properties of light-emitting diodes.

Impact of Reference-Layer Stray Field on the Write-Error Rate of Perpendicular Spin-Transfer-Torque Random-Access Memory

A finite-temperature micromagnetic study of magnetization switching and write-error rates in a perpendicular magnetic tunnel junction with and without synthetic antiferromagnetic layer (SAF) is presented. In the absence of SAF, magnetization switching is induced by domain-wall nucleation and propagation. Although the various modes of domain-wall propagation are observed to delay switching, it does not show an appreciable impact on the overall write-error-rate slopes. In the presence of the nonuniform stray field from the SAF assembly, the domain-wall-based switching modes turn on more complex magnetization dynamics that impedes the switching process. In cases where the SAF layers fail to balance each other contributing to a stronger stray field, incoherent switching modes give rise to metastable states with significantly longer lifetimes, and a dramatic change in the write-error slopes is observed. Simulation results are compared to recent experimental findings from time-domain measurements of spin-transfer-torque switching and measurements of anomalous write-error rates. These results directly prove the long-predicted relation of the SAF stray field to write-error anomaly in perpendicular spin-transfer-torque magnetic random-access memory and could be useful to solve the anomalous write-error problems.

Highly efficient coherent detection of terahertz pulses based on ethanol

Water-based terahertz (THz) coherent detection scheme has been recently proposed, which overcomes the bandwidth limitation or high probe laser power demand in solid-/gas-based schemes. Here, we report a highly efficient THz coherent detection method using ethanol with superior performances under the mechanism of four-wave mixing. We systematically investigate the energy ratios and relative polarizations between the THz-induced second harmonic and control second harmonic (CSH) beams and reveal that ethanol always exhibits significantly higher detection sensitivity than water. The coherent, incoherent, or hybrid detection mode can be flexibly switched by changing the CSH beam polarization. The enhanced sensitivity derives from the much larger third-order nonlinear coefficient and lower ionization potential of ethanol. In addition, for the ethanol–water mixtures with various concentrations, the THz coherent detection signals can always be decomposed into the linear superposition of those from pure ethanol and neat water at the sub-picosecond timescale, indicating the synergistic contribution of ethanol and water molecules in the mixture during the detection process. This work provides a valid method to significantly improve the sensitivity of the liquid-based coherent detection scheme and a research perspective for exploring the solute–solvent molecular interactions.

Self-Induced Mode-Locking in Electrically Pumped Far-Infrared Random Lasers.

Mode locking, the self-starting synchronous oscillation of electromagnetic modes in a laser cavity, is the primary way to generate ultrashort light pulses. In random lasers, without a cavity, mode-locking, the nonlinear coupling amongst low spatially coherent random modes,can be activated via optical pumping, even without the emission of short pulses. Here, by exploiting the combination of the inherently giant third-order χ(3) nonlinearity of semiconductor heterostructure lasers and the nonlinear properties of graphene, the authors demonstrate mode-locking in surface-emitting electrically pumped random quantum cascade lasers at terahertz frequencies. This is achieved by either lithographically patterning a multilayer graphene film to define a surface random pattern of light scatterers, or by coupling on chip a saturable absorber graphene reflector. Intermode beatnote mapping unveils self-induced phase-coherence between naturally incoherent random modes. Self-mixing intermode spectroscopy reveals phase-locked random modes. This is an important milestone in the physics of disordered systems. It paves the way to the development of a new generation of miniaturized, electrically pumped mode-locked light sources, ideal for broadband spectroscopy, multicolor speckle-free imaging applications, and reservoir quantum computing.

Modifying the coherence of vertical-cavity surface-emitting lasers using chaotic cavities

Vertical-cavity surface-emitting lasers (VCSELs) have been widely adopted in a variety of applications in recent years, with even more applications currently under research and development as a result of the emergence of visible-light VCSELs. Most of these applications make use of the ease of fabrication of large two-dimensional arrays of lasers, a feature unique to VCSELs that makes them scalable and versatile. However, applications that rely on the uniformity of the emitted beam in the transverse plane, such as illumination, projection, holography, and displays, suffer from the coherence artifacts (speckles) that reduce the quality of the formed images when coherent lasers are used. In this work, we show that, by using a chaotic-cavity D-shaped mesa, the coherence of broad-area VCSELs can be substantially reduced (the number of mutually incoherent modes is almost doubled, and the spectral full width at half-maximum is increased from ∼ 1.1 n m to ∼ 4.5 n m ), and the maximum achievable optical power is increased by up to 60%. The simplicity of implementing the reported design, which requires no additional fabrication steps, makes it a promising solution for applications that would benefit from the lower speckle density of the emitted light as well as those that rely on lower temporal coherence, such as time-domain optical coherence tomography and fiber-optic gyroscopes.

Generating a hollow twisted correlated beam using correlated perturbations.

In this study, a twisted correlated optical beam with a dark hollow center in its average intensity is synthesized by correlated correlation perturbation and incoherent mode superposition. This new hollow beam has a topological charge (TC) mode with a zero value compared with a coherence vortex that has a TC mode with a nonzero value. We transform the twisted correlated beam from solid centered to dark hollow centered by constructing a correlation between the twist factor and the spot structure parameter. Theoretical and experimental results show that twist correlation makes the random optical beam an asymmetric orbital angular momentum spectral distribution and a tunable intensity center. Controlling the correlation parameters can make the focal spot of the twisted beam a dark core when the dominant mode of the TC is still zero. The new nontrivial beams and their proposed generation method provide important technical preparations for the optical particle manipulation with low coherence environment.

Fast generation of calculated ADF-EDX scattering cross-sections under channelling conditions

Advanced materials often consist of multiple elements which are arranged in a complicated structure. Quantitative scanning transmission electron microscopy is useful to determine the composition and thickness of nanostructures at the atomic scale. However, significant difficulties remain to quantify mixed columns by comparing the resulting atomic resolution images and spectroscopy data with multislice simulations where dynamic scattering needs to be taken into account. The combination of the computationally intensive nature of these simulations and the enormous amount of possible mixed column configurations for a given composition indeed severely hamper the quantification process. To overcome these challenges, we here report the development of an incoherent non-linear method for the fast prediction of ADF-EDX scattering cross-sections of mixed columns under channelling conditions. We first explain the origin of the ADF and EDX incoherence from scattering physics suggesting a linear dependence between those two signals in the case of a high-angle ADF detector. Taking EDX as a perfect incoherent reference mode, we quantitatively examine the ADF longitudinal incoherence under different microscope conditions using multislice simulations. Based on incoherent imaging, the atomic lensing model previously developed for ADF is now expanded to EDX, which yields ADF-EDX scattering cross-section predictions in good agreement with multislice simulations for mixed columns in a core–shell nanoparticle and a high entropy alloy. The fast and accurate prediction of ADF-EDX scattering cross-sections opens up new opportunities to explore the wide range of ordering possibilities of heterogeneous materials with multiple elements.

Camera-Derived Photoplethysmography (rPPG) and Speckle Plethysmography (rSPG): Comparing Reflective and Transmissive Mode at Various Integration Times Using LEDs and Lasers.

Background: Although both speckle plethysmography (SPG) and photoplethysmography (PPG) examine pulsatile changes in the vasculature using opto-electronics, PPG has a long history, whereas SPG is relatively new and less explored. The aim of this study was to compare the effects of integration time and light-source coherence on signal quality and waveform morphology for reflective and transmissive rSPG and rPPG. Methods: (A) Using time-domain multiplexing, we illuminated 10 human index fingers with pulsed lasers versus LEDs (both at 639 and 850 nm), in transmissive versus reflective mode. A synchronized camera (Basler acA2000-340 km, 25 cm distance, 200 fps) captured and demultiplexed four video channels (50 fps/channel) in four stages defined by illumination mode. From all video channels, we derived rPPG and rSPG, and applied a signal quality index (SQI, scale: Good > 0.95; Medium 0.95–0.85; Low 0.85–0.8; Negligible < 0.8); (B) For transmission videos only, we additionally calculated the intensity threshold area (ITA), as the area of the imaging exceeding a certain intensity value and used linear regression analysis to understand unexpected similarities between rPPG and rSPG. Results: All mean SQI-values. Reflective mode: Laser-rSPG > 0.965, LED-rSPG < 0.78, rPPG < 0.845. Transmissive mode: 0.853–0.989 for rSPG and rPPG at all illumination settings. Coherent mode: Reflective rSPG > 0.951, reflective rPPG < 0.740, transmissive rSPG and rPPG 0.990–0.898. Incoherent mode: Reflective all <0.798 and transmissive all 0.92–0.987. Linear regressions revealed similar R2 values of rPPG with rSPG (R2 = 0.99) and ITA (R2 = 0.98); Discussion: Laser-rSPG and LED-rPPG produced different waveforms in reflection, but not in transmission. We created the concept of ITA to investigate this behavior. Conclusions: Reflective Laser-SPG truly originated from coherence. Transmissive Laser-rSPG showed a loss of speckles, accompanied by waveform changes towards rPPG. Diffuse spatial intensity modulation polluted spatial-mode SPG.

Flame synchronization and flow field analysis of double candles

Flame instability is an interesting topic in combustion science, and it is also of great practical significance for designing high-performance burners. In recent years, the synchronization phenomenon caused by a pair of coupled candles has aroused widespread attention, among which in-phase and anti-phase are two notable examples. In order to understand the flow structure of the flashing flame and the reasons for the synchronization of the flame oscillator, COMSOL flow field analysis technology and MATLAB grey analysis technology were used to analyze the flow field of candles in three combustion states and the change of candle combustion state respectively. By analyzing the flow structure of flashing flame, the reasons of different burning states of candles are explained. Moreover, the experimental and numerical simulation results show that the in-phase mode is characterized by the symmetrical formation of vortex concerning the centerline of two groups of flames, and the flames are vertically stretched under the vortex action. The characteristic of the anti-phase mode is that the vortex alternately forms asymmetrically concerning the centerline of two groups of flames, and the non-uniformity and asymmetry of the vortex lead to the instability of the flame surface. The characteristic of the incoherent mode is that the vortices generated by the two candle groups no longer act on each other, and the airflow field between the two candle groups remains approximately unchanged.

Graph Attention Network-Based Single-Pixel Compressive Direction of Arrival Estimation

In this letter, we present a single-pixel compressive direction of arrival (DoA) estimation technique leveraging a graph attention network (GAT)-based deep-learning framework. The physical layer compression is achieved using a coded-aperture technique, probing the spectrum of far-field sources that are incident on the aperture using a set of spatio-temporally incoherent modes. This information is then encoded and compressed into the channel of the coded-aperture. The coded-aperture is based on a metasurface antenna design and it works as a receiver, exhibiting a single-channel and replacing the conventional multi-channel raster scan-based solutions for DoA estimation. The GAT network enables the compressive DoA estimation framework to learn the DoA information directly from the measurements acquired using the coded-aperture. This step eliminates the need for an additional reconstruction step and significantly simplifies the processing layer to achieve DoA estimation. We show that the presented GAT integrated single-pixel radar framework can retrieve high fidelity DoA information even under relatively low signal-to-noise ratio (SNR) levels.

Visual experimental research on the propagation instabilities in a plane-radial rotating detonation engine

Using visualization method, assisted by synchronous pressure and ion measurements, the characteristics of four instabilities and operating ranges are investigated in a plane-radial rotating detonation engine. At fuel-lean limits, the rotating detonation wave (RDW) propagates in an incoherent mode. The propagation is unstable with obvious interruption characterized by local flameout, decoupling, re-initiation and propagation direction change. At low mass flow rates, the quasi detonation mode with fairly low pressure peak but high velocity is obtained, in which the outer circumferential flame and central flame occur alternately. The modes switching of RDW operates at critical operating conditions. Two modes are obtained in one test and sudden change in the wave-head number exists in the combustor. An asymmetric dual-wave mode is obtained at special conditions with low mass flow rates and fuel-rich conditions, and the intensities of two asymmetric RDWs alternately increase and decrease with time. The phenomena of decoupling and re-initiation occur periodically, and an amplitude-frequency low-frequency oscillation is observed in this instability. In these instabilities, the pre-combustion phenomenon ahead of detonation wave occurs on the deflagration surface, which promotes the development of RDW. Furthermore, the pressure rising rates is greatly affected by combustion modes and wave-head number. The pressure rising rates of quasi detonation mode is an order of magnitude lower than that of stable detonation mode.

Burst properties of the highly active FRB20201124A using uGMRT

Abstract We report the observations of the highly active FRB20201124A with the upgraded Giant Metrewave Radio Telescope at 550-750 MHz. These observations in the incoherent array mode simultaneously provided an arcsecond localization of bursts from FRB20201124A, the discovery of persistent radio emission associated with the host galaxy, and the detection of 48 bursts. Using the brightest burst in the sample (F = 108 Jy ms) we find a structure-maximizing dispersion measure of 410.8 ± 0.5 pc cm−3. We find that our observations are complete down to a fluence level of 10 Jy ms, above which the cumulative burst rate scales as a power-law R( &amp;gt; F) = 10 hr−1(F/10 Jy ms)γ with γ = −1.2 ± 0.2. We find that the bursts are on average wider than those reported for other repeating FRBs. We find that the waiting time between bursts is well approximated by an exponential distribution with a mean of ∼2.9 min during our observations. We searched for periodicities using both a standard Fourier domain method and the Fast Folding Algorithm, but found no significant candidates. We measure bulk spectro-temporal drift rates between −0.75 and −20 MHz ms−1. Finally, we use the brightest burst to set an upper limit to the scattering time of 11.1 ms at 550 MHz. The localization of FRB20201124A adds strength to the proof-of-concept method described in our earlier work and serves as a potential model for future localizations and follow-up of repeating FRBs with the uGMRT.