Zircon Inclusions Research Articles

Auto-regenerative TL dating with zircon inclusions from fired materials

In this paper it is shown that it is possible to date fired material using zircon inclusions. The effects of zoning and anomalous fading are overcome using an auto-regenerative dating procedure. The high radioactivity of the grains gives a measurable self-induced TL (thermoluminescence) signal within a few months. Comparison of this “auto-regenerated” TL with the natural TL (which has accumulated since the firing) yields the age of the material. A sensitive TL reader capable of recording the auto-regenerated signal after 6 months is also described, and the results of age determinations on a number of known age samples are presented.

Wall-Rock Alteration and Uranium Mineralization in Parts of Thomas Range Mining District, San Juan County, Utah, and Its Significance in Mineral Exploration: ABSTRACT

Several important uranium deposits associated with fluorspar and beryllium are located in parts of Thomas Range area. The mineralization is found in dolomites and dolomitic limestones of Paleozoic age and sandstones, tuffs, and rhyolites belonging to the Tertiary Spor Mountain and Topaz Mountain Formations. The pipes, veins, and nodules of fluorspar are replaced by uranium. Veins and disseminations of radioactive fluorspar opal and overgrowths of secondary minerals are found in rhyolites, tuffs, carbonate rocks, and breccias. The radioactivity in sandstones and conglomerates emanates from weeksite, beta-uranophane, zircon, gummite, etc. Uraninite occurs as rare inclusions in fluorite, gummite, and zircon. It also occurs as highly oxidized rare aphanitic grains disseminated in a few ore deposits. The results of the present investigations may influence the initiation of future exploration programs in the Thomas Range mining district. Hydrothermal fluids of deep-seated magmatic origin rich in U, V, Th, Be, and F reacted with the country rocks. The nature and sequence of wall-rock alteration and its paragenetic relationship with the ores have been determined. The mineralization is confined to the altered zones. The ore bodies in the sedimentary rocks and the breccias are located in the fault zones. More than 1,000 faults are present in the area, greatly complicating mineral prospecting. The wall-rock alteration is very conspicuous and can be used as a valuable tool in mineral exploration. End_of_Article - Last_Page 857------------

Fluid Inclusion Analyses of Detrital Quartz Grains--New Provenance Tool: ABSTRACT

Preliminary analyses by microthermometry of fluid inclusions in detrital quartz of the Upper Cambrian Lamotte Sandstone revealed the occurrence of 2 distinct groups of aqueous fluid inclusions. Specific salinity signatures and homogenization temperatures may be used to distinguish specific granite types of the source rock terrain. The inclusions chosen for analysis occur in isolated clusters or are randomly distributed within a grain, commonly in association with mineral inclusions of zircon, sphene, rutile, and/or tourmaline. Secondary inclusions are present in the Lamotte but are not included in this study. The first group of inclusions is characterized by low salinities (< 1.0-8.0 wt. % eq. NaCl), the second by high salinities (12.1-29.6 wt. % eq. NaCl). Final melting temperatures as low as -30.6°C indicate the presence of divalent ions in these inclusions. Both groups yield homogenization temperatures of between 150°C and 220°C. The low-salinity inclusions occur predominantly in subrounded to well-rounded sand less than 1.0 mm in size that is derived from a distal source. The brine inclusions occur exclusively in subangular to angular gravel 2.0-3.0 mm in size, implying a more proximal source area. A comparison of these inclusions with inclusions found in the granites of the apparent source terrain indicates that a medium-silica amphibole-orthoclase granite (Slabtown type) or a low-silica amphibole-plagioclase granite (Sivermines type) or both are the primary source rocks for this quartz. These granite types have limited areal distribution in the present-day St. Francois mountains and the identification of these granite types as the source rock for the locally derived quartz has broad implications for reconstructing Cambrian depositional environments and paleostructure of the ancient St. Francois mountains. End_of_Article - Last_Page 239------------

U-Th-Pb systematics of zircon inclusions in rock-forming minerals: A study of armoring against isotopic loss using the Sherman Granite of Colorado-Wyoming, USA

Zircon inclusions were separated from the five major rock-forming minerals of the Sherman Granite of southern Wyoming, in order to evaluate the degree of discordance as a possible function of host minerals. U-Th-Pb isotopic ratios were determined for two size fractions of zircon inclusions from each mineral, plus five size fractions from the bulk rock. Isotopic data from the inclusions have more than double the spread of data on a discordia obtained from the bulk sample, thereby yielding better-resolved concordia intercepts. However, isotopic ratios and morphologic characteristics indicate that the Pb/U systematics are complicated by inherited radiogenic lead. Although the data array cannot unequivocally be explained by the armoring process, the proposed methodology has succeeded in identifying groups of zircon with different isotopic characteristics. As such, this technique can be used to decipher complex geologic/isotopic histories and may be a useful addition to routine zircon geochronology.

Electron-Excited Luminescence as a Petrologic Tool

Preliminary studies of cathodo-luminescence of rock-forming minerals have shown that several minerals can be rapidly identified, and that structural and composition variations with potential genetic implications can be revealed. Detrital and secondary quartz can be distinguished by color differences. Radiation halos in quartz, caused by zircon inclusions, have been detected. Apatites show a variety of colors, which may be of diagnostic value. Carbonates show red luminescence, except for iron-bearing specimens which yield reduced or no luminescence. Zoning in dolomites is readily detected from variation in intensity of luminescence. Mottled texture probably results from inheritance of manganese and iron from the carbonate replaced by the dolomite. Residual skeletal structure in fossils can be easily delineated by cathodo-luminescence, and it may be possible to ascribe a featureless luminescence to recrystallization. A faint blue luminescence, which rapidly disappeared, has been seen in ovoid structures of ...

Placer platinum in California and Oregon

Recent discoveries over the last decade of new gemfields, exploitation of new and existing deposits, and application of relatively new techniques have greatly increased our knowledge of the basalt-derived gem sapphire–ruby–zircon deposits. In this paper we focus on the Late Mesozoic to Cenozoic intraplate basaltic fields of the West Pacific continental margins. We review advances made in understanding the genesis of these deposits, based on the application of newer techniques. We also critically review existing data on the gem corundum deposits, in order to further refine a model for their origin.In some of the intraplate basaltic fields, corundum-bearing xenoliths have been found showing a range of PT formation conditions from 790 °C at 0.85 GPa to as much as 1100 to 1200 °C at 1.0 to 2.5 GPa. Although most magmatic sapphires contain syngenetic inclusions of columbite-group phases, zircon, spinel and rutile, some contain additional nepheline and K-feldspar, suggesting crystallization from more undersaturated alkaline magma while the Weldborough field of NE Tasmania also contains molybdenite and beryl, suggesting at least some interaction with more fractionated ‘granitic-type’ magmas. There is a large range in PT conditions calculated for the metamorphic rubies (from 780 to 940 °C, through 800 to 1150 °C up to 1000 to 1300 °C). Fluid/melt inclusion studies on magmatic corundums generally suggest that they formed in a CO2-rich environment from a ‘syenitic’ melt under a range of T conditions from 720 to 880 °C up to 1000 to 1200 °C. Oxygen isotope studies reveal that typical magmatic corundums have values of + 4.4 to 6.9‰, whereas metamorphic corundums from the same basaltic host have lower values of + 1.3 to 4.2‰.Geochronological studies have shown that some fields produced a simple eruptive and zircon/corundum crystallization event while others had multiple eruptive events but only one or two zircon crystallization events. For a few fields, some corundums/zircons crystallized in storage regions and then remained relatively inert for periods of 200 to 400 Ma without significant change before transport to the surface in the Cenozoic. Tectonic studies of the Australian region suggest that many of the corundums crystallized from magmas related to episodic basaltic volcanism in a tectonic regime of extension, associated with the opening of the Tasman and Coral Seas. For the Asian region, the magmatic–polygenetic corundums within the basaltic fields largely crystallized in a tectonic regime of distributed E–W extension, whereas the metamorphic-metasomatic corundums crystallised in a transpressional regime associated with the collision of the Indian Plate with the Eurasian Plate (e.g., [Garnier, V., Giuliani, G., Maluski, H., Ohnenstetter, D., Deloule, E., 2003. Ar–Ar and U–Pb ages of marble-hosted ruby deposits from Central and South-east Asia. Geophysical Research Abstracts 5, 03751; Garnier, V., Giuliani, G., Ohnenstetter, D., and Schwarz, D., 2004. Les gisements de corindon: classification et genese. Les placers a corindon gemme. Le Regne Mineral 55, 7-47; Garnier, V., Ohnenstetter, D., Giuliani, G., Maluski, H., Deloule, E., Phan Trong, T., Pham Van, L., Hoang Quang, V., 2005a. Age and significance of ruby-bearing marble from the Red River Shear Zone, Northern Vietnam. Canadian Mineralogist 43, 1315–1329]).

Artificial corundum and silicate crystals

Recent discoveries over the last decade of new gemfields, exploitation of new and existing deposits, and application of relatively new techniques have greatly increased our knowledge of the basalt-derived gem sapphire–ruby–zircon deposits. In this paper we focus on the Late Mesozoic to Cenozoic intraplate basaltic fields of the West Pacific continental margins. We review advances made in understanding the genesis of these deposits, based on the application of newer techniques. We also critically review existing data on the gem corundum deposits, in order to further refine a model for their origin.In some of the intraplate basaltic fields, corundum-bearing xenoliths have been found showing a range of PT formation conditions from 790 °C at 0.85 GPa to as much as 1100 to 1200 °C at 1.0 to 2.5 GPa. Although most magmatic sapphires contain syngenetic inclusions of columbite-group phases, zircon, spinel and rutile, some contain additional nepheline and K-feldspar, suggesting crystallization from more undersaturated alkaline magma while the Weldborough field of NE Tasmania also contains molybdenite and beryl, suggesting at least some interaction with more fractionated ‘granitic-type’ magmas. There is a large range in PT conditions calculated for the metamorphic rubies (from 780 to 940 °C, through 800 to 1150 °C up to 1000 to 1300 °C). Fluid/melt inclusion studies on magmatic corundums generally suggest that they formed in a CO2-rich environment from a ‘syenitic’ melt under a range of T conditions from 720 to 880 °C up to 1000 to 1200 °C. Oxygen isotope studies reveal that typical magmatic corundums have values of + 4.4 to 6.9‰, whereas metamorphic corundums from the same basaltic host have lower values of + 1.3 to 4.2‰.Geochronological studies have shown that some fields produced a simple eruptive and zircon/corundum crystallization event while others had multiple eruptive events but only one or two zircon crystallization events. For a few fields, some corundums/zircons crystallized in storage regions and then remained relatively inert for periods of 200 to 400 Ma without significant change before transport to the surface in the Cenozoic. Tectonic studies of the Australian region suggest that many of the corundums crystallized from magmas related to episodic basaltic volcanism in a tectonic regime of extension, associated with the opening of the Tasman and Coral Seas. For the Asian region, the magmatic–polygenetic corundums within the basaltic fields largely crystallized in a tectonic regime of distributed E–W extension, whereas the metamorphic-metasomatic corundums crystallised in a transpressional regime associated with the collision of the Indian Plate with the Eurasian Plate (e.g., [Garnier, V., Giuliani, G., Maluski, H., Ohnenstetter, D., Deloule, E., 2003. Ar–Ar and U–Pb ages of marble-hosted ruby deposits from Central and South-east Asia. Geophysical Research Abstracts 5, 03751; Garnier, V., Giuliani, G., Ohnenstetter, D., and Schwarz, D., 2004. Les gisements de corindon: classification et genese. Les placers a corindon gemme. Le Regne Mineral 55, 7-47; Garnier, V., Ohnenstetter, D., Giuliani, G., Maluski, H., Deloule, E., Phan Trong, T., Pham Van, L., Hoang Quang, V., 2005a. Age and significance of ruby-bearing marble from the Red River Shear Zone, Northern Vietnam. Canadian Mineralogist 43, 1315–1329]).