Incident Wavelength Research Articles

Structural, optical, and impedance spectroscopy of the pseudobrookite Pb0·5Ba0·5Fe2O5 synthesized by sol–gel route

Pseudobrookite of general formula Pb0·5Ba0·5Fe2O5 was synthesized by the sol–gel route. X-ray diffraction confirms the orthorhombic Pnma space group of our sample. UV–Vis absorption spectroscopy was used to characterize this material's optical properties. We used the Tauc model and absorption measurements to estimate the direct optical band gap at 3.53 eV. We also calculate the Urbach energy, the optical extinction coefficient, and the refractive index. In addition, the skin depth, optical conductivity, and Cauchy parameters were investigated in relation to the incident photon's wavelength. Electrical conductivity data flow the Jonscher's power law and show that PBFO has two different conducts; Semiconductor behavior in the temperatures region [400 K–520 K]. Then, a metallic trend was detected beyond TS-M = 520 K. The correlated barrier hopping (CBH) model is the appropriate model to describe the conduction process in low temperature range. On the other hand, the conduction is ensured by the non-overlapping small polaron tunneling (NSPT) at high temperature zone. The scaling study shows that the conductivity spectra deviate from Summerfield and Ghosh scaling. The random barrier model (RBM) is employed to correct the Summerfield approach and we note that the conductivity isotherms are combined into a single master curve. The estimated activation energies values from dc-conductivity, hopping frequency and relaxation time are very close. The behavior of dielectric parameters was examined using the Maxwell-Wagner theory of interfacial polarization. The dielectric-relaxation phenomenon is shown by the behaviors of imaginary parts of impedance (Z″) and modulus (M″). The ideal electrical equivalent circuit for simulating the Nyquist curves (i.e. Z′′(Z′)) for our pseudobrookite is (Rg + Rgb//CPEgb). Finally, the entropy (ΔS), and enthalpy (ΔH) were established as thermodynamic parameters.

Simplified LIBS-based intensity-ratio approach for concentration estimation (SLICE): an approach for elemental analysis using laser induced breakdown spectroscopy.

We propose what we believe to be a new approach for elemental analysis using laser induced breakdown spectroscopy (LIBS). This method offers enhanced convenience and simplicity for elemental analysis as it eliminates the necessity of Boltzmann/ Saha-Boltzmann plot. It is an intensity-ratio based approach that provides several notable advantages. One of the key benefits is its ability to perform comprehensive elemental analysis using only a few spectral lines; specifically, only n + 1 emission lines are sufficient for a sample containing n elemental species. This offers a great flexibility in the choice of emission lines which do not suffer from self-absorption. Further, high accuracy can be obtained as many repeated estimations from a single measurement are possible. We demonstrate the theory and working procedure of this technique by experimentally recording the data of two samples (binary and ternary copper alloys). A nanosecond Nd:YAG pulsed laser of ∼7 ns pulse duration and 532 nm incident wavelength is used. The results are in good agreement with CF-LIBS and Energy-dispersive X-ray spectroscopy (EDS).

Leveraging InGaN solar cells for visible light communication reception

AbstractSolar cells are increasingly being utilised for both energy harvesting and reception in free‐space optical (FSO) communication networks. The authors focus on the implementation of a mid‐band p‐In0.01Ga0.99 N/p‐In0.5Ga0.5 N/n‐In0.5Ga0.5 N (PPN) solar cell, boasting an impressive 26.36% conversion efficiency (under 1.5AM conditions) as a receiver within an indoor FSO communication network. Employing a solar cell with dimensions of 1 mm in length and width, the FSO system underwent simulation using Optisystm software, while the solar cell's behaviour was simulated using SCAPS‐1D. The received power from the solar cell was then compared to that of four commercially available avalanche photodiode (APD) receivers. Exploring incident wavelengths spanning 400–700 nm within the visible spectrum, across transmission distances of 5, 10, 15, and 20 m, the study presented current‐voltage (IV) and power‐voltage curves. Notably, the InGaN solar cell exhibited superior electrical power output compared to all commercial APDs. In conclusion, the findings underscore that augmenting received power has the potential to enhance FSO network quality and support extended transmission distances.

Numerical investigation into impact of halide perovskite material on the optical performance of prism-loaded hybrid surface plasmon resonance biosensor: A strategy to increase sensitivity

The technology of surface plasmon resonance (SPR) is widely recognized and valued for its ability to rapidly and sensitively investigate biomolecular interactivities in real-time. Herein, we numerically investigate the collective influence of metal/ transition metal dichalcogenide (TMDC)/halide perovskite (HP)/2D carbon (C) and phosphorus (P) allotropes on the functionality of an SPR biosensor deploying Kretschmann configuration. The incident light wavelength is held constant at 633 nm, and radiative properties of the hybrid structure are determined using the attenuated total reflection and transfer matrix techniques. Crucial performance metrics such as quality factor (QF), figure of merit (FoM), sensitivity, and detection accuracy are calculated. The comparison is conducted and evaluated against the current literature using performance outcomes in terms of several prisms such as BK7, BAK1, BAF10, SF5, SF10, SF11, 2S2G, CaF2, and CsF, several TMDCs such as WS2, MoS2, WSe2, MoSe2, and PtSe2, several HPs such as CsPbI3, KSnI3, CsSnI3, and FASnI3, and 2D C/P allotropes such as Graphene, MXene, Black phosphorene (BP), and Blue phosphorene (BlueP) in order to search optimum parameters, and then we implement the best one in each layer of this biosensor design. It is noticed that the SPR heterostructure based on BAK1 prism, plasmonic metal Ag, tungsten disulfide (WS2) TMDC, formamidinium tin iodide (FASnI3) HP and 2D BP exhibits outstanding performance with regard to sensor performance characteristics. The observed FoM and sensitivity are 48.2/RIU and 402°/RIU, respectively. The investigation of the electric field distribution within this biosensor along the normal to the interface is also conducted using the finite difference time domain (FDTD) approach to demonstrate the unique contribution of FASnI3. The findings presented in this study are anticipated to play a key role in the improvement of plasmonic resonance-based biosensing domains like DNA hybridization or formalin detection by employing halide perovskite as an additional layer in SPR biosensors.

Absolutely interferometric calibration of phase liquid crystal spatial light modulators using honeycomb gratings composited with Billet-split Fresnel zone plates.

The traditional interferometric calibration of phase spatial light modulators (SLM) based on interference fringes shift is easily disturbed due to environmental vibration. Here a kind of absolutely interferometric calibration of phase SLM is investigated to eliminate the disturbance using dual honeycomb gratings composited with Billet-split Fresnel zone plates (BsFZP), in which honeycomb gratings split an incident beam into three beams and the first two beams are interfered by BsFZP while the last beam is chosen as the absolute reference point. The experiments on both 532 and 632.8nm incident wavelengths were separately carried out, and the measuring accuracy was proved by a SID4 wavefront sensor. The proposed high-accuracy calibration provided the basis for SLM application scenarios with high precision.

Using Temperature-Programmed Photoelectron Emission (TPPE) to Analyze Electron Transfer on Metallic Copper and Its Relation to the Essential Role of the Surface Hydroxyl Radical

Surface processes such as coatings, corrosion, photocatalysis, and tribology are greatly diversified by acid–base interactions at the surface overlayer. This study focuses on the action of a metallic copper surface as an electron donor/acceptor related to the inactivation of viruses. It was found that regarding Cu2O or Cu materials, electrostatic interaction plays a major role in virus inactivation. We applied the TPPE method to clarify the mechanism of electron transfer (ET) occurring at light-irradiated copper surfaces. The TPPE characteristics were strongly influenced by the environments, which correspond to the temperature and environment dependence of the total count of emitted electrons in the incident light wavelength scan (PE total count, NT), the photothreshold, and further the activation energy (ΔE) analyzed from the Arrhenius plot of NT values obtained in the temperature increase and subsequent temperature decrease processes. In this study, we re-examined the dependence of the TPPE data from two types of Cu metal surfaces: sample A, which was mechanically abraded in alcohols, water, and air, and sample C, which was only ultrasonically cleaned in these liquids. The NT for both samples slowly increased with increasing temperature, reached a maximum (NTmax) at 250 °C (maximum temperature, Tmax), and after that, decreased. For sample A, the NTmax value decreased in the order H2O > CH3OH > C2H5OH > (CH3)2CHOH > C3H7OH, although the last alcohol gave Tmax = 100 °C, while with sample C, the NTmax value decreased in the order C3H7OH > (CH3)2CHOH > C2H5OH > CH3OH > H2O. Interestingly, both orders of the liquids were completely opposite; this means that a Cu surface can possess a two-way character. The NT intensity was found to be strongly associated with the change from the hydroxyl group (–Cu–OH) to the oxide oxygen (O2−) in the O1s spectra in the XPS measurement. The difference between the above orders was explained by the acid–base interaction mode of the –Cu–OH group with the adsorbed molecule on the surfaces. The H2O adsorbed on sample A produces the electric dipole –CuOδ−Hδ+ ⋅⋅⋅ :OH2 (⋅⋅⋅ hydrogen bond), while the C3H7OH and (CH3)2CHOH adsorbed on sample C produce RO−δHδ+ ⋅⋅⋅ :O(H)–Cu− (R = alkyl groups). Gutmann’s acceptor number (AN) representing the basicity of the liquid molecules was found to be related to the TPPE characteristics: (CH3)2CHOH (33.5), C2H5OH (37.1), CH3OH (41.3), and H2O (54.8) (the AN of C3H7OH could not be confirmed). With sample A, the values of NTmaxa and ΔEaUp1 both increased with increasing AN (Up1 means the first temperature increase process). On the other hand, with sample C, the values of NTmaxc and ΔEcUp1 both decreased with increasing AN. These findings suggest that sample A acts as an acid, while sample C functions as a base. However, in the case of both types of samples, A and C, the NTmax values were found to increase with increasing ΔEUp1. It was explained that the ΔEUp1 values, depending on the liquids, originate from the difference in the energy level of the hydroxyl group radical at the surface denoted. This is able to attract electrons in the neighborhood of the Fermi level of the base metal through tunnelling. After that, Auger emission electrons are released, contributing to the ET in the overlayer. These electrons are considered to have a strong ability of reducibility.

In-situ spectral reflectance investigation of hetero-epitaxially grown β-Ga2O3 thin films on c-plane Al2O3 via MOVPE process

Metalorganic vapor-phase epitaxy of β-Ga2O3/c-plane Al2O3 heterostructures was monitored in-situ by spectral reflectance in different wavelengths. The reflectance spectrum was analysed as a function of the growth time and the incident wavelength to estimate the growth rate and the refractive index at the growth temperatures. The obtained values are validated by ex-situ methods such as secondary ion mass spectrum measurement and spectroscopic ellipsometry. A theoretical simulation of the reflectance spectrum was carried out by combining a transfer matrix method with a multilayer model, and a good agreement with the experimental results is presented.

Prediction and simulation of a potential barrier block in Van der Waals heterojunction photodetectors.

The pBp structure can effectively suppress the dark current of a photodetector by blocking the majority of carriers. However, it is a big challenge to carry out large-scale simulation optimization for two-dimensional (2D) pBp heterojunction photodetectors due to a lack of the device models. Here, a numerical simulation model of the 2D pBp heterojunction was established based on the finite element method to solve this problem. Using this model, the spatial distribution of the energy band is clarified for each layer. The concentration of nonuniformly distributed electrons, induced by the incident light and bias voltage, is obtained by solving the diffusion and drift equations. The characteristics of the photocurrent and the dark current could be presented and the quantum efficiency could be calculated by counting the ratio of the number of carriers collected at the terminals and the carriers photogenerated. The material parameters could be modified for the optimization of the simulation and prediction. In using our model, a B P/M o S 2/graphene photodetector was constructed, and the simulation results show that it works effectively under a reverse bias ranging from -0.3 to 0V. The external quantum efficiency is 18%, while the internal efficiency approaches 85%. The doping in the barrier region definitely does not affect the dark current and the photocurrent. These results are similar to experimental results published earlier. In addition, with the BP bandgap width of 0.8eV and incident wavelength of 1.7µm, the dark current density predicted by the model could reach 3.3×10-8 A/c m 2, which is two orders lower than the reported 2D photodetectors at room temperature. This proposed model provides a way to design 2D pBp heterojunction photodetectors.

Excitation of optical tamm state for photonic spin hall enhancement

This work presents a dielectric material-based optical Tamm state (OTS) excitation technique with modified dispersion characteristics for photonic spin hall effect (PSHE) enhancement. The dispersion analysis of the structure is carried out to validate OTS’s localization and corresponding PSHE generation for a given polarization at 632.8 nm incident wavelength. The exceptional points are optimized by considering thickness-dependent angular dispersion analysis. PSHE-based transverse displacement (PSHE-TD) is dependent on the defect layer thickness. The optimized structure provides 10.73 times lambda (or 6.78 upmum) PSHE-TD at an incidence angle of 41.86{}^{circ }. The PSHE-TD of the optimized structure is sufficiently high due to the much narrower resonance than the plasmonic-based structures. Further, the structure’s potential to function as a PSHE-TD-based optical sensor is assessed. The optimized structure shows an analytical average sensitivity of about 43,789 upmum/RIU showing its capability to detect the analytes with refractive index variations in the 10^{-4} range. The structure demonstrates a three-time sensitivity improvement compared to similar resonance designs. Considering only dielectric materials in the proposed structure and considerably enhanced PSHE-TD, the development of highly efficient PSHE-TD-assisted commercial structures is anticipated.

ЕФЕКТ АНОМАЛЬНО СИЛЬНОГО ПОГЛИНАННЯ ЕЛЕКТРОМАГНІТНОГО ВИПРОМІНЮВАННЯ ТОНКИМИ ПРОВІДНИКОВИМИ ВОЛОКНАМИ

Subject and Purpose. The effect of abnormally strong interaction of electromagnetic radiation with fine conductive fibers is сonsidered. Metal, semiconductor, or graphite fibers can heavily absorb electromagnetic radiation provided the fiber diameter is several hundred times smaller than the radiation wavelength. For the most effective transfer of radiation energy, a proper ratio of the radiation wavelength, fiber refractive index, and fiber diameter is sought. Methods and Methodology. The diffraction problem of a cylinder whose diameter is much smaller than the incident wavelength is treated. The formulas to compute the radiation absorption efficiency have a series appearance. The series coefficients depend on the diameter of the cylinder, its refractive index, and the wavelength. With the cylinder diameter much smaller than the wavelength, these coefficients can be series expanded in the small parameter, and it should suffice to take into account only the first term. The findings are experimentally verified by measurements of the microwave radiation energy transmitted to a fine graphite fiber. Results. Relationships have been determined of the fiber diameter, fiber conductivity, and wavelength when the effect of the electromagnetic radiation absorption was at its strongest. The experiment showed that even unfocused, an 8 mm wave beam transmitted more than 10% of the energy to a graphite fiber of a 12 μm diameter. The size of the fiber area struck by the beam was 300 times smaller than the beam cross-section. Conclusions. Conductive fibers of a cross-sectional diameter much smaller than the incident radiation wavelength strongly absorb this radiation. The absorption is at its strongest when the radiation wavelength in the fiber substance is approximately 10 times larger than the cross-sectional diameter of the fiber. The effect of the anomalously strong absorption of electromagnetic radiation can be used to transfer the electromagnetic radiation energy to fine-fiber targets no matter whether the radiation beam is focused or not. Also, this effect can be of use for making protective screens in the microwave region.

Photonic-plasmonic resonator for SERS biodetection.

To improve the laser utilization efficiency and avoid photodamage in surface-enhanced Raman spectroscopy (SERS), it is imperative to introduce photon technology into the field of SERS detection. A major challenge is the inefficient interaction between the substrate and the incident wavelength, resulting in limited Raman enhancement at a relatively low level. Here, we sputtered plasmonic Au nanoparticles (NPs) onto photonic TiOx nanocavities, creating a novel hybrid photonic-plasmonic resonator that achieves a large degree of optical manipulation and long-term localization. By facilely controlling the size of Au NPs, the resonance wavelength of plasmonic Au NPs can be matched with the photonic nanocavity to maximize the light trapping intensity, which leads to a synergistic enhancement of SERS via the electromagnetic and chemical mechanisms, resulting in a SERS enhancement up to 1.75 × 109 under non-resonant excitation. In particular, the substrate can achieve strong absorption and localization for long wavelengths, thus enabling a large SERS enhancement with a small light intensity, which can effectively avoid the photodamage that may occur in Raman testing. The substrate can detect various biomolecules, including biomarkers in serum, thus realizing the differentiation of different cancers. This study provides a powerful and sensitive platform for SERS, facilitating bioanalysis and disease diagnosis in complex systems.

The Raman gap and collisional absorption

One of the long-standing puzzles observed in many laser-plasma experiments is the gap in the Raman backscattering spectrum. This gap is characterized by the absence of backscattered light between some critical wavelength and twice the incident laser wavelength. The latter is associated with the absolute Raman instability from the quarter-critical density surface. Supported by particle-in-cell (PIC) simulations, it is suggested that the gap can result from the collisional damping of the backscattered light. A linear analysis of the competition between the Raman growth rate and the damping rate in a non-homogenous plasma predicts the gap's existence and width as a function of the system's parameters. The theory is compared with the PIC simulations and past experiments.

An Au25 nanocluster/MoS2 vdWaals heterojunction phototransistor for chromamorphic visual-afterimage emulation.

Color vision relies on three cone photoreceptors that are sensitive to different wavelengths of light. The interaction of three incident light wavelengths over time creates a fascinating color coupling perception, termed chromamorphic computing. However, the realization of this fascinating characteristic in semiconductor devices remains a great challenge. Herein, a mixed-dimensional optoelectronic transistor based on a novel metal nanocluster Au25(SC12H25)18 and two-dimensional MoS2 van der Waals (vdWaals) heterojunction is proposed for chromamorphic visual-afterimage emulation with red-green-blue three-color spatiotemporal coupling perception. This distinguished molecular-like electronic level of Au25 nanoclusters allows the transistor to have visible light-sensitive properties, endowing it with the ability to perceive color information. Moreover, the chromamorphic functions are realized using a color spatiotemporal coupling approach. By utilizing the photogating effect of light stimulus, the device exhibits visual experience-dependent plasticity in accordance with the Bienenstock-Cooper-Munro (BCM) learning rule. Most importantly, for the first time, intriguing visual afterimages could be implemented using a color sensitization approach based on a close relationship between visual persistence and negative afterimages. These results represent an important step towards a new generation of intelligent visual color perception systems for human-computer interaction, bionic robots, etc.

Extrinsic chirality tailors Stokes parameters in simple asymmetric metasurfaces.

Metasurfaces tailor electromagnetic confinement at the nanoscale and can be appropriately designed for polarization-dependent light-matter interactions. Adding the asymmetry degree to the desing allows for circular polarizations of opposite handedness to be differently absorbed or emitted, which is of interest in fields spanning from chiral sensing to flat optics. Here, we show that simple, low-cost asymmetric metasurfaces can control Stokes parameters in the transmitted far-field. With only 50 nm of asymmetric plasmonic shells on self-assembled polystyrene nanospheres, our metasurfaces allow for great spectral and incident angle tunability. We first investigated broadband extrinsic chirality in metasurfaces with asymmetric plasmonic semishells; we found high extinction circular dichroism (CD) in the near-infrared range. We then excited it with linear polarization and performed hyperspectral Stokes polarimetry on the transmitted field. We showed that the S3 parameter follows the behavior of CD in extinction, and that the output field position on the Poincaré sphere can be widely controlled by using the incidence angle and wavelength. Furthermore, simulations agreed well with the experiments and showed how the near-field chiro-optical response influences the extrinsic chiral behavior in absorption and the polarization state of the transmitted field.

A high-performance broadband phototransistor array of a PdSe2/SOI Schottky junction.

There is great interest in the incorporation of novel two-dimensional materials into Si-based technologies to realize multifunctional optoelectronic devices via heterogeneous integration. Here, we demonstrate a gate-tunable, self-driven, high-performance broadband phototransistor array based on a PdSe2/Si Schottky junction, which is fabricated by pre-depositing a semi-metallic PdSe2 film on a SOI substrate. In addition, thanks to the zero bandgap of the PdSe2 material and the PdSe2/Si vertical heterostructure, the prepared phototransistor exhibits pronounced photovoltaic properties in a wide spectral range from ultraviolet to near-infrared. The responsivity, specific detectivity and response time of the device at the incident light wavelength of 808 nm are 1.15 A W-1, 9.39 × 1010 Jones, and 27.1/40.3 μs, respectively, which are better than those of previously reported PdSe2-based photodetectors. The photoelectric performance can be further improved by applying an appropriate gate voltage to the phototransistor and the responsivity of the device increases to 1.61 A W-1 at VG = 5 V. We demonstrate the excellent imaging capabilities of a 4 × 4 array image sensor using PdSe2/SOI phototransistors under 375 nm, 532 nm, and 808 nm laser sources.

Coexistence of giant Goos-Hänchen shift and high reflectance in Dirac semimetal based multilayered structure.

Bulk Dirac semimetals (BDSs) possess Fermi energy dependent optical parameters, providing unprecedented opportunities for the study of the controllable Goos-Hänchen (GH) shift. However, the enhancement of GH shifts often comes at the cost of the reflectance in the previous BDS-based structures, which hinders their practical application. In this work, we theoretically present the investigation of the GH shift in a multilayered structure composed of one BDS film and a symmetric one-dimensional photonic crystal (1DPC) with a defect layer. We demonstrate that this well-designed structure supports a large GH shift at the specific working wavelength, whose magnitude can be enhanced up to 3883 times the incident wavelength. In particular, such an enhanced GH shift achieved in this structure is associated with high reflectance (0.94) and these remarkable features can be attributed to the sharp change in the reflective phase and the destructive interference that occurs between the simultaneously excited optical Tamm state (OTS) at the BDS/1DPC interface and the defect state at the 1D defected PC. In addition, we also explore the manipulation of the GH shift by adjusting the Fermi energy of the BDS as well as the geometrical parameter of the multilayered structure. Our results provide a new approach for realizing an enhanced and controllable GH shift in a BDS-based multilayered structure, which endows it with promising prospects for application in optical sensors, optical detectors and beam controllers.

Reflection of Elastic Waves in Dipolar Gradient Half-Space under the Control of External Magnetic Field

This paper investigated the reflection of plane waves at the interface of dipolar gradient elastic solids under the control of an external magnetic field. This study focused on the increasing influence of the microstructural effect as the incident wavelength approaches the characteristic length of the microstructure or at higher frequencies. Initially, the dispersion equation for the propagation of elastic waves was derived from the dipole strain gradient theory and Maxwell’s electromagnetic theory. Subsequently, the amplitude ratios of various reflected waves to incident P-waves and incident SV-waves were calculated based on the interface conditions. Finally, the numerical results were used to discuss the impact of the external magnetic field and microstructural characteristic length on the propagation of the reflected wave. It was observed that the microstructural effect generated new wave modes and introduced dispersion characteristics into the elastic waves. Conversely, the external magnetic field primarily influences the amplitude of the elastic wave propagation via the Lorentz force without creating new wave modes or affecting the dispersion properties of the elastic wave in the dipolar gradient elastic solid.

Theoretical Design of Near-Infrared Tunable Surface Plasmon Resonance Biosensors Based on Gate-Controlled Graphene Plasmons

A tunable near-infrared surface plasmon resonance (SPR) biosensor based on gate-controlled graphene plasmons is numerically investigated by using the finite element method (FEM) and the transfer matrix method (TMM). The novel properties of chemical potential sensing make the proposed sensor promising in the application of ultra-sensitive and highly specific biosensing technology. The sensitivity of chemical potential sensing in wavelength interrogation mode can be calculated to be 1.5, 1.89, 2.29, 3.21, 3.73 and 4.68 nm/meV, respectively, at the resonance wavelengths of 1100, 1200, 1310, 1550, 1700 and 1900 nm. The figure of merit (FOM) achieves 129.3, 101.1, 84.5, 67.7, 69.5 and 59.7 eV−1, respectively, at these resonance wavelengths. The sensitivity of chemical potential sensing in gate voltage interrogation mode also can be calculated to be 156.9822, 143.6147, 131.0779, 111.0351, 101.3415 and 90.6038 mV/meV, respectively, at the incident wavelengths of 1100, 1200, 1310, 1550, 1700 and 1900 nm. The FOM achieves 135.6, 103.0, 88.9, 62.2, 66.6 and 61.5 eV−1, respectively, at these incident wavelengths. Theoretical estimates suggest that the limit of detection (LOD) of the sensor’s DNA sensing can reach the level of femtomolar or even attomolar, comparable to and even lower than that of 2D nanomaterial-enhanced metal SPR sensors with AuNPs as a sensitivity enhancement strategy. The feasibility of preparation and operation of this new concept SPR biosensor is also analyzed and discussed.

Optimized design of nano-photonic devices for temperature self-regulating on vanadium dioxide thin films

Phase change materials can enable temperature self-regulation due to their drastic changes in optical properties accompanying the phase transition. Significant reduction of the optical absorption after the transition is the key ingredient for an enhanced regulating performance. However, the absorptivity of unpatterned vanadium dioxide (VO2) thin films can hardly be reduced after phase transition at visual-to-infrared band. In this work, we combine the direct binary search (DBS) and particle swarm optimization (PSO) algorithms for an optimized design of temperature self-regulating nano-photonic devices on VO2 thin films. For a given incident wavelength, a pixelated structure is firstly inverse-designed by the DBS algorithm which maximizes the absorption contrast before and after the transition. To overcome fabrication challenges as pixel size is at deep sub-wavelength scale, the pixelated structure can then be replaced by geometric shapes which are more tractable in manufacturing processes. The geometrical parameters are optimized by the PSO algorithm where our optimized device brings the absorptivity down to 33% after the transition. These results provide an effective way for the inverse design of optimized nano-photonic structures based on phase change materials.

Effect of vibrational resonances and dynamic polarizability on the Raman spectrum of furfural: A vibrational coupled cluster study

The Raman spectrum of furfural is computed and analyzed using the Vibrational Coupled Cluster Method (VCCM). Furfural has immense applications in organic synthesis, electrocatalysis and energy conversion process. The experimental Raman spectrum of furfural is congested and broad, even in the medium energy regions like C-C stretching and CO stretching regions. We extensively analyze the Fermi and higher quanta resonance effects on the Raman spectrum by examining the VCCM wavefunctions. In addition, a systematic study on the effect of incident frequency on the anharmonic Raman activity is carried out by comparing the results with incident wavelengths 325.0 nm and 632.8 nm against static polarizability.