Incident Azimuthal Angle Research Articles

Polarization-controlled structured illumination for high-resolution imaging

Structured illumination microscopy is a powerful technique that has significantly advanced biological imaging by doubling the resolution compared to conventional methods. However, further resolution enhancement in SIM typically requires complex optical configurations that demand precise control of the incident light's polar and azimuthal angles. To address this challenge, we designed polarization-controlled structured illumination that leverages a dipole resonance all-dielectric super-lattice metasurface (ADSLM). This approach, as demonstrated through simulation, enables high-contrast, high-fidelity object reconstruction with over a 4-fold resolution enhancement. Furthermore, the polarization-controlled ADSLM eliminates the need for complex optical alignments and mechanical adjustments, offering significant potential for integrated high-performance applications in biological imaging.

Strong and wide-angle nonreciprocal radiation in modified distributed Bragg reflector-Weyl semimetal heterostructure

An approach to obtain easy-to-fabricate and spectrally selective nonreciprocal thermal emitter (NTE) has been proposed. The presented hybrid structure is composed of Weyl semimetal (WSM) film sandwiched by Ge/BaF2/Ge tri-layer and metal substrate. It has been shown that structural parameters hold tolerance on the order of hundreds of nanometers, which are highly favorable for fabricating with low cost and high performance. Multiband responses of the device can be realized through controlling the thickness of last Ge layer, which boosts the flexibility of preparation and potential applications. The giant nonreciprocity can be maintained with broad polar and azimuthal angle ranges. By manipulating the structural parameters, a remarkable result of nonreciprocal radiation is realized under both the transverse electric (TE) and transverse magnetic (TM) wave incidence. By changing the azimuthal angle (ϕi) of incidence, the nonreciprocity (η) can be effectively manipulated. The simulated η spectra is symmetric along the azimuthal angle ϕi=90°, and η=0 when ϕi=90°. Our results provide a much simpler way to achieve the multi-channel nonreciprocity and could lead to the advancement of power scavenging and conversion devices.

Observation of Circular Dichroism Induced by Electronic Chirality.

Chiral phases of matter, characterized by a definite handedness, abound in nature, ranging from the crystal structure of quartz to spiraling spin states in helical magnets. In 1T-TiSe_{2} a source of chirality has been proposed that stands apart from these classical examples as it arises from combined electronic charge and quantum orbital fluctuations. This may allow its chirality to be accessed and manipulated without imposing either structural or magnetic handedness. However, direct bulk evidence that broken inversion symmetry and chirality are intrinsic to TiSe_{2} remains elusive. Here, employing resonant elastic x-ray scattering technique, we reveal the presence of circular dichroism, i.e., polarization dependence of the resonant diffraction intensity, up to ∼40% at forbidden Bragg peaks that emerge at the charge and orbital ordering transition. The dichroism varies dramatically with incident energy and azimuthal angle. Comparison to calculated scattering intensities traces its origin to bulk chiral electronic order in TiSe_{2} and establishes resonant elastic x-ray scattering as a sensitive probe to electronic chirality.

Multi-material fused deposition modelling of structural–functional integrated absorber with multi-scale structure possessing tunable broadband microwave absorption

Designing and manufacturing advanced structural microwave absorbers is one of the most feasible methods to address the growing electromagnetic stealth and protection challenges in both military and civilian domains. To this end, under the application context of structural–functional integration, a series of nanocomposites with varying ratios were prepared using multi-walled carbon nanotubes (MWCNTs) and inexpensive thermoplastic polypropylene as raw materials. The dispersion of nanofillers, rheological properties, thermal properties, and mechanical properties were evaluated. The research found that the impedance matching factor of the electromagnetic wave absorbers plays a more critical role in determining the material’s absorption capacity compared to the loss factor. Simple structural layering by changing the composition and design can effectively increase the effective absorption bandwidth (EAB) of the absorbers, with microwave attenuation primarily arising from conductive loss, interfacial polarization, dipole polarization, and multiple reflections. Finally, a multi-scale quasi-honeycomb absorber was fabricated using multi-material 3D printing with a structured design. Both simulation and experimental results showed consistent trends, demonstrating low sensitivity to the incident azimuth angle. This research features simplicity, low cost, and strong design capability, providing a new strategy for the preparation of functionally graded materials with potential applications in electromagnetic wave absorption.

Practical guides for x-ray photoelectron spectroscopy: Use of argon ion beams for sputter depth profiling and cleaning

Ion beams are used in x-ray photoelectron spectroscopy (XPS) to clean samples and perform compositional sputter depth profiles. The purpose of this article is to compile good practice, recommendations, and useful information related to the use of argon ion sources for inexperienced users of XPS instrumentation. The most used type of ion source generates monoatomic argon ions at a range of energies from a fixed direction relative to the instrument. The angle and direction of the ion beam with respect to the surface are normally altered by manipulating the sample, and this may involve tilting the sample to change the angle of incidence or rotating the sample to change the azimuthal incidence angle. Atomic argon ion beams cause damage to the structure of the material surface, which may exhibit itself as a change in stoichiometry or topography as well as the implantation of argon atoms. Therefore, caution is required in the interpretation of XPS depth profiles. Gas cluster ion sources offer new possibilities and choices to XPS users. Gas cluster sources enable the sputtering of organic materials with high yield in comparison to inorganic materials and offer the potential for nearly damage-free depth profiling of delicate organic materials as well as low damage cleaning of inorganic materials. It may be possible to use argon clusters to reduce damage during the depth profiling of inorganic materials, but there is currently insufficient evidence to make any general recommendations.

Numerical investigation of optical characterization of polycarbonate panels

Polycarbonate panels (PC panels) are state-of-the-art transparent insulating materials widely used in the construction industry due to their cavity structure, which provides exceptional thermal insulation and optimal optical performance. However, the inherent anisotropy of the three-dimensional cavity structure complicates radiative transfer and requires consideration of both azimuth and zenith angles in optical performance evaluation. This aspect has received limited attention in existing research. This study aims to accurately characterize the optical performance of PC panels through numerical simulations. A three-dimensional radiative transfer model based on the discrete ordinate radiation model is developed to solve the radiation transfer equation. The model's independency regarding mesh division, angular discretization, and accuracy is validated. The effects of incidence angle, geometric parameters, and optical properties of PC panels on optical performance are analyzed. The findings reveal a strong correlation between transmittance and absorption with variations in incident zenith and azimuth angles. The transmittance exhibits a consistent monotonic variation expressible as a rational bifunction. Notably, absorption peaks occur within specific solid angle ranges, with increased structural complexity resulting in heightened absorption and greater uncertainty. For conventional PC materials, maximum transmittance ranges from 46.9 % to 73 %, while maximum absorption ranges from 2.3 % to 13.5 %. Increasing absorption coefficients, refractive index, and surface scattering coefficients nonlinearly decrease transmittance while increasing absorption. Additionally, deviations in transmittance and absorption with azimuth angle amplify with an increase in non-horizontal structures. Sensitivity analysis indicates a significant influence of zenith angle on transmittance, and absorption coefficient predominantly affects absorption.

Second-Order Approximate Reflection Coefficient of Thin Interbeds with Vertical Fractures

The horizontal fractures in the strata will close in the compaction effect of overlying strata, while the vertical cracks are widely developed, which can be equivalent to HTI (transverse isotropy with a horizontal axis of symmetry) medium. When an S-wave propagates into HTI media, the shear wave will divide into two types of waves: a fast S-wave and slow S-wave. When the strata of HTI are thin and overlapping, called the thin interbeds model, the wave field exhibits complex primary reflections, converted waves, and multiples. We introduce a new second-order approximation of the total reflection coefficient, with the incidence angle lower than the critical angle in thin-interbed HTI media using a recursive algorithm. We verify the effectiveness of the second-order approximation by analyzing the energy of multiples. Comparing the second-order approximate solution that degenerates the HTI medium into isotropic and Kennett’s exact solution, we find that our solution has an accuracy of over 99.9% in any azimuth, with the incidence angle lower than the critical angle under P-wave incidence. However, our solution of the SP wave field is suitable for incidence azimuth angles between 0–75° and 120–180°, with the lowest accuracy occurring at an incidence angle of 25° and a relative error of 6.4%. The approximate solution in the SS wave field has the same applicable range as the SP wave, with the maximum error of 6.3% occurring at the incident angle of 1°. This new second-order approximate formula for the total reflection coefficient of thin interbeds composed of HTI helps us to understand the reflection characteristics of complex thin interbeds. It also lays a theoretical foundation for the development of AVO (Amplitude Versus Offset) analysis and inversion techniques for lithological and stratigraphic oil and gas reservoirs.

Auditory Spatial Bisection of Blind and Normally Sighted Individuals in Free Field and Virtual Acoustics.

Sound localization is an important ability in everyday life. This study investigates the influence of vision and presentation mode on auditory spatial bisection performance. Subjects were asked to identify the smaller perceived distance between three consecutive stimuli that were either presented via loudspeakers (free field) or via headphones after convolution with generic head-related impulse responses (binaural reproduction). Thirteen azimuthal sound incidence angles on a circular arc segment of ±24° at a radius of 3 m were included in three regions of space (front, rear, and laterally left). Twenty normally sighted (measured both sighted and blindfolded) and eight blind persons participated. Results showed no significant differences with respect to visual condition, but strong effects of sound direction and presentation mode. Psychometric functions were steepest in frontal space and indicated median spatial bisection thresholds of 11°-14°. Thresholds increased significantly in rear (11°-17°) and laterally left (20°-28°) space in free field. Individual pinna and torso cues, as available only in free field presentation, improved the performance of all participants compared to binaural reproduction. Especially in rear space, auditory spatial bisection thresholds were three to four times higher (i.e., poorer) using binaural reproduction than in free field. The results underline the importance of individual auditory spatial cues for spatial bisection, irrespective of access to vision, which indicates that vision may not be strictly necessary to calibrate allocentric spatial hearing.

All-dielectric six-foci metalens for infrared polarization detection based on Stokes space.

The detection technology of infrared polarization has gained significant attention due to its ability to provide better identification and obtain more information about the target. In this paper, based on the expression of the full polarization state in Stokes space, we designed micro-nano metasurface functional arrays to calculate the polarization state of the incident light by reading the Stokes parameters (a set of parameters that describe the polarization state). Metalens with linear and circular polarization-dependent functions are designed based on the propagation and geometric phases of the dielectric Si meta-atoms in the infrared band, respectively. The device exhibits a high polarization extinction ratio. The influence of incident angle on polarization-dependent metalens is discussed, and the analysis of incident angle is of great significance for the practical application. An infrared six-foci metalens is proposed, each corresponding to the Poincaré sphere's coordinate component (a graphical polarization state method). By matching the six polarization components of the incident light and the Stokes parameters, the polarization detection function can be realized by calculating the polarization state of the incident light. There is a slight error between the theoretical value and the calculated value of the unit coordinate component of the Stokes parameters. At the same time, the intensity distribution of different incident light polarization azimuth angles and ellipticity angles on the focal plane agrees with the theory. The advantage of the device is that the polarization state of the incident light can be directly calculated without passing through other components. The six-foci metalens have potential applications in polarization detection and imaging, space remote sensing, etc.

Hybrid cubic-chessboard metasurfaces for wideband angle-independent diffusive scattering and enhanced stealth.

Because of the shortcomings associated with their scattering patterns, both the chessboard and cubic phased metasurfaces show non-perfect diffusion and hence sub-optimal radar cross section reduction (RCSR) properties. This paper presents a novel and powerful hybrid RCSR design approach for diffusive scattering by combining the unique attributes of cubic phase and chessboard phase profiles. The hybrid phase distribution is achieved by simultaneously imposing two distinct phase profiles (chessboard and cubic) on the hybrid metasurface area with the aid of geometric phase theory to further enhance the diffusive scattering and RCSR. It is shown in this paper that through the integration of cubic and chessboard phase profiles, a metasurface with the hybrid phase mask successfully overcomes all the above issues and shortcomings related to the RCSR of both chessboard and cubic metasurfaces. In addition, the proposed design leverages the unique scattering properties offered by these distinct phase profiles to achieve enhanced stealth capabilities over wide frequency ranges and for large incidence angles. Simulation and measurement results show that the designed hybrid metasurfaces using the proposed strategy achieved RCSR and low-level diffused scattering patterns from 12-28 GHz (80%) for normal incidence of a far-field CP radar plane wave. The hybrid metasurface shows a stable angular diffusion and RCSR performance when the azimuthal and elevation incidence angles are in the range of 0° → ± 75° which is wider than other designs in the literature. Therefore, this work can make objects significantly less detectable in complex radar environments when enhanced stealth is required.

Polarization-independent nonreciprocal radiation in polar dielectric-Weyl semimetal planar heterostructure

The polarization-independent nonreciprocal radiation is highly demanded for controlling light-matter interactions in tailoring and enhancing radiative heat transfer. An obvious violation of Kirchhoff’s law and strong nonreciprocity (η) has been achieved in a form of heterostructure composed of polar dielectric, Weyl semimetals (WSMs) and silver (Ag) substrate. By manipulating the structural parameters, a remarkable result of nonreciprocal radiation is realized under both transverse electric (TE) and transverse magnetic (TM) wave incidence. The peak value of η is 0.53 and 0.37 for TM and TE polarizations, respectively, at the resonance wavelength of 8.7 μm. By changing the azimuthal angle of incidence, η spectra can be effectively manipulated. The distribution map of η is symmetrical with ϕ=90°, and η=0 for both TM and TE polarizations. Our results provide a much simpler way to prove the violation of Kirchhoff’s law and could lead to the advancement of high efficiency nonreciprocal thermal radiation.

Weyl semimetal mediated epsilon-near-zero hybrid polaritons and the induced nonreciprocal radiation.

Polaritonic excitation and management in ultra-thin polar crystals has recently received significant attention and holds new promise for epsilon-near-zero (ENZ) modes. However, manipulation of the ENZ mode via anisotropic magneto-optic (MO) material remains elusive. Herein, we provide an effective strategy for constructing an ENZ polar thin film with dependence on Weyl semimetals (WSM). The thermal radiation of the proposed device is explored with electromagnetic (EM) simulations that utilize the anisotropic rigorous coupled-wave analysis (aRCWA) method. Strong coupling of the ENZ mode to WSM polaritons has been demonstrated, and the structural parameters hold tolerance on the order of hundreds of nanometers, which is highly favorable for low-cost fabrication and high-performance application. By changing both the azimuthal angle (ϕ) and angle of incidence (θ), the nonreciprocity (η) can be effectively influenced. The distribution of η is symmetrical with ϕ = 180°, η = 0 when ϕ = 90° and ϕ = 270°. The mechanism of this proposal is owing to the hybrid polaritons supported by the polar thin film and nonreciprocal radiation of WSM, which is validated by examining the amplitude distribution of the magnetic field. The nonreciprocal emitter described herein allows simultaneous control of spectral distribution and polarization of radiation, which will facilitate the active design and application of mid-infrared (MIR) thermal emitters.

Response characteristics and tensile failure evaluation of asphalt concrete core wall under spatial oblique incidence of P-wave

The research on asphalt concrete core embankment dam under the spatial oblique incidence of seismic wave and the dynamic tensile failure of the core is still insufficient. This paper considers the spatial arbitrariness of P-wave incident azimuth angle γ and oblique incident angle α, constructs the non-uniform free field on the foundation boundary based on the wave field superposition principle, and establishes a wave input method for P-wave oblique-incidence in three-dimensional space. Then, an empirical formula for the change in the instantaneous tensile strength of asphalt concrete with the strain rate is established on the basis of the test results. Furthermore, a new core safety evaluation method based on instantaneous tensile stress and strength is proposed to discriminate element tensile failure. Finally, the influence law of incident azimuth and oblique incident angles on the acceleration and stress spatial distribution of asphalt concrete core is analyzed. The damage mechanism of the core caused by the surge of local tensile stress caused by spatial oblique incidence is revealed. The traditional static strength discrimination method has an error in discriminating the core failure compared with the method proposed in this paper. The distribution characteristics of tensile weak zone and failure zone of the core under different incident modes are clarified. Results show that compared with the vertical incident, the core accelerations in the water flow and dam axis directions increased by a maximum of 9.6 times and 68% under spatial oblique incidence (γ ∈ [0°, 90°] and α∈(0°, 75°]), and the core acceleration in the vertical direction can be reduced by 69%. The core compressive and tensile stresses increased by a maximum of 31.3% and 4.0 times under spatial oblique incidence (γ ∈ [0°, 90°] and α∈(0°, 75°]). Neglecting spatial oblique incidence will underestimate the core accelerations and stresses seriously. The more the incident direction deviates to the dam axis and the larger the oblique incident angle is, the more prone it is to tensile failure on the wave-facing side of the core. When the incident direction is consistent with the dam axis and the incident angle is 75°, the tensile failure on the wave-backing side of the core is more serious than that on the wave-facing side. The use of the traditional static strength discrimination method will result in the large crack failure error of the core.

Analysis of AVAZ Seismic Forward Modeling of Fracture-Cavity Reservoirs of the Dengying Formation, Central Sichuan Basin

For the purpose of clarifying the seismic response characteristics of fractured-cavity reservoirs of Dengying Formation in the central Sichuan Basin, the paper first intends to establish three geological models of fracture cave reservoirs based on drilling, logging, and core data of the Dengying Formation in the central Sichuan Basin. Then, the formation reflection is calculated with reference to anisotropic Horizontal Transverse Isotropy (HTI) medium. Finally, further research on Amplitude Variation with Azimuth (AVAZ) seismic forward modeling has been conducted to clarify the seismic response characteristics of different reservoir types in the study area. The results suggest that: Seismic response characteristics of fractured-cavity reservoirs are controlled by incident angle and azimuth angle of seismic waves in different types of reservoirs. The incident angle of the seismic wave controls the difference in amplitude caused by different micro-fracture densities, and the azimuth angle controls the identification ability of the micro-fracture direction. The increase in incident angle brings about a gradual decline in amplitude. The magnitude reaches the highest when the azimuth is parallel to the normal direction of the fracture surface; however, it’ll come down to the lowest as the azimuth is perpendicular to the normal direction of the fracture surface. The fracture density fails to affect the amplitude as long as the azimuth angle is parallel to the direction of the fracture. However, the decreased amplitude reflects the increasing fracture density as the azimuth angle is identical to the normal direction of the fracture surface. The comparison between the theoretical model of three different types of fractured-cavity reservoirs and the actual uphole trace shows that the model has high accuracy. The prospect of seismic identification of fractured-cavern reservoirs, based on the results, can provide us with feasible and applicable evidence for future research on seismic identification of reservoirs and prediction of fracture distribution in the Dengying Formation of central Sichuan.

Photon efficient orientation estimation using polarization modulation in single-molecule localization microscopy.

Combining orientation estimation with localization microscopy opens up the possibility to analyze the underlying orientation of biomolecules on the nanometer scale. Inspired by the recent improvement of the localization precision by shifting excitation patterns (MINFLUX, SIMFLUX), we have adapted the idea towards the modulation of excitation polarization to enhance the orientation precision. For this modality two modes are analyzed: i) normally incident excitation with three polarization steps to retrieve the in-plane angle of emitters and ii) obliquely incident excitation with p-polarization with five different azimuthal angles of incidence to retrieve the full orientation. Firstly, we present a theoretical study of the lower precision limit with a Cramér-Rao bound for these modes. For the oblique incidence mode we find a favorable isotropic orientation precision for all molecular orientations if the polar angle of incidence is equal to degrees. Secondly, a simulation study is performed to assess the performance for low signal-to-background ratios and how inaccurate illumination polarization angles affect the outcome. We show that a precision, at the Cramér-Rao bound (CRB) limit, of just 2.4 and 1.6 degrees in the azimuthal and polar angles can be achieved with only 1000 detected signal photons and 10 background photons per pixel (about twice better than reported earlier). Lastly, the alignment and calibration of an optical microscope with polarization control is described in detail. With this microscope a proof-of-principle experiment is carried out, demonstrating an experimental in-plane precision close to the CRB limit for signal photon counts ranging from 400 to 10,000.

Research on EMI of Traction Network Transient Current Pulse on Shielded Cable Terminal Load

The transient current pulse (TCP) caused by the traction network short-circuit fault (TNSF) will produce a high-strength transient electromagnetic field (TEMF). The electromagnetic field will interfere with nearby weak current equipment through the shielded cable. In this paper, a transient circuit model (TCM) for the short-circuit traction network is proposed to calculate the transient current. The short circuit is equivalent to a ring, and the TEMF transient electromagnetic field is calculated based on the magnetic dipole. The current response of the TEMF transient electromagnetic field on the shielded cable is deduced based on the transmission line theory and verified by experiments. The electromagnetic interference (EMI) of a TEMF transient electromagnetic field to the shielded cable terminal load were was studied under various incidence angles, azimuth angles, and polarization angles. The results demonstrate that the greater the incident angle and azimuth angle, the greater the EMI on the terminal load. The horizontal distance between the shielded cable head and the short-circuit point should be greater than 6 m, and the incident angle should be greater than 45∘. This method can provide a theoretical basis for the electromagnetic compatibility research of traction power supply systems and their nearby weak current equipment.

Investigating the PS seismic imaging of faults using seismic modelling and data from the Snøhvit field, Barents Sea

PS seismic data from the Snøhvit field are compared with seismic modelling to understand the effect of azimuthal separation and incidence angle on the imaging of faults and associated horizon discontinuities. In addition, the frequency content of seismic waves backscattered from faults is analysed. The study area consists of a horst structure delimited by a northern fault dipping NW and oblique to the east–west survey orientation, and a southern fault dipping SSW and subparallel to the survey. Due to the raypath asymmetry of PS reflections, the northern fault is imaged better by azimuthally partitioned W data that include receivers downdip of the fault, relative to the sources, than by E data where the receivers are updip from the sources. Partial stack data show a systematic increase in the PS fault-reflected amplitude and therefore quality of fault imaging with increasing incidence angle. Fault images are dominated by internal low-medium frequency shadows surrounded by medium-high frequencies haloes. Synthetic experiments suggest that this is due to the interaction of specular waves and diffractions, and the spectral contribution from the fault signal, which increases with fault zone complexity. These results highlight the impact of survey geometry and processing workflows on fault imaging. Supplementary material: model description, processed sections and videos are available at https://doi.org/10.6084/m9.figshare.c.5727552

Effects of Measurement Configurations on the Sensitivity of Morpho Butterfly Scales Based Chemical Biosensor

The Morpho butterfly wing with tree-shaped alternating multilayer is an effective chemical biosensor to distinguish between ambient medium, and its detection sensitivity is inextricably linked to the measurement configuration including incident angle, azimuthal angle, and so on. In order to reveal the effects and the selection of measurement configuration. In this work, the model of the Morpho butterfly wing is built using the rigorous coupled-wave analysis method by considering its profile is a rectangular-groove grating. On basis of the above model, the reflectivity of different diffraction orders at a different incident angle and azimuthal angle is calculated, and the influence of incident angle and azimuthal angle on performance of Morpho butterfly scales-based biosensor is analyzed. The optimal incident angle at each azimuthal angle is given according to the proposed choice rule, then the azimuthal angle and the corresponding incident angle can be selected further.

Earth-Based Repeat-Pass SAR Interferometry of the Moon: Spatial–Temporal Baseline Analysis

Earth-based repeat-pass synthetic aperture radar (SAR) interferometry (InSAR) is a powerful tool to obtain the high-precision lunar terrain and deformation information, due to the short revisit period as well as the all-weather, long-time, and large-coverage characteristics of radar lunar observation. In this article, the baseline formation mechanism is investigated. Theoretical analyses show that the interferometric baselines mainly come from the lunar libration; however, the lunar libration may also result in a significant change of baselines and further lead to serious geometric decorrelation. To address this problem and ensure the Earth-based repeat-pass InSAR of the Moon, the precise relative motion model between the radar and the lunar target, considering lunar libration, is established, and the subradar point (SRP) wagging phenomenon is analyzed. Then, to evaluate the effects of SRP wagging on InSAR coherence, a geometric decorrelation model based on azimuth angle and incident angle is proposed. Based on that, the spatial–temporal baseline for Earth-based repeat-pass InSAR of the Moon is analyzed based on numerical simulation. Results show that the temporal baseline has obvious periodicity with a cycle of about 27 days. When the temporal baseline is an integral multiple of 27, the spatial baseline usually has the minimum value and the geometric decorrelation effect is relatively slight. Moreover, using the geometric decorrelation criteria, we examine the effects of radar frequency, position, and target location on the quantity of viable interferometric pairs, which has guiding significance for the selection of radar system parameters, radar position, and lunar target area.

Lattice induced transparency-like in symmetric metasurfaces tuned with incident angles in mid-infrared region

It is very meaningful to implement a tunable transparency window device with a simple metasurface structure in the mid-infrared band. In this paper, we propose a symmetric metasurface structure that consists of thin layers of graphene and a split anti-ring (SAR). This structure can achieve a tunable lattice-induced transparency-like (LIT-like) spectral response in the wide frequency range of 20–40 THz. Our simulation results show that the realization of the LIT-like phenomenon is due to the strong coupling between the lattice diffraction resonance mode (LDRM) and the wide plasmon resonance mode produced by SAR. The LIT-like response can be dynamically shifted by adjusting the incident pitch angle, the single and double LIT-like can also be switched by adjusting the azimuth angle, which provides convenient post-fabrication tunability. The coupling mechanism of the single LIT-like phenomenon is explained via a dual-oscillator model, which agrees well with the simulation results. In addition, the effects of spacer layer thickness, spacer layer refractive index, ambient refractive index on the position and size of the transparency window are analyzed. Lastly, a tunable delay bandwidth product between 0.46 and 0.86 will be produced due to the addition of graphene. Our finding manifests a novel design of the mid-infrared dynamically tuned slow-light device. • The symmetric metasurface can realized the LIT-like effect, which is produced by the strong coupling of plasmonic mode and LDRM. • The LIT-like effect can be tuned in mid-infrared regime by changing the incident pitch angle. • Single and double transparency windows can be switched when the incident azimuth angle is 0° and 90°. • The delay bandwidth product can be dynamically controlled by Fermi energy and incident pitch angle.