Incident Angle Research Articles

Enhancing payload capacity to low earth orbit via a relay solution trajectory with laser-powered vehicles

ABSTRACT Low Earth Orbit (LEO) stands as the primary access point for deep space exploration endeavors, encompassing a variety of space missions such as communication satellites, Earth observation platforms, and scientific research missions. In light of the expanding scope of human activities in space, the cost associated with accessing LEO has emerged as a critical focal point for spacecraft designers. Within the spectrum of proposed solutions, laser-powered vehicle has emerged as a viable avenue toward achieving cost-effective launch options. In order to significantly augment the payload capacity of laser-powered launch vehicles destined for LEO, this study introduced a novel Relay Solution Trajectory Flight Scheme. Central to this scheme was the implementation of a relay mirror system affixed to a satellite, which served to stabilize the incident angle of the laser beam directed toward the laser-powered vehicle, thereby ensuring continuous alignment between the laser beam and the vehicle’s axis throughout the duration of the flight. Following the development of comprehensive structural, propulsive, aerodynamic, and trajectory models tailored for the laser-powered vehicle, an optimization of its flight trajectory was conducted, comparing this innovative strategy with two conventional flight strategies. The outcomes of this analysis showcased a notable enhancement of 269.29% in payload capacity compared to conventional strategies that lacked a relay satellite system, within a designated 400 km LEO flight scenario. This endeavor underscored the transformative potential of advanced relay systems in reshaping payload delivery mechanisms and elevating mission feasibility levels, notwithstanding the intricate coordination challenges posed by intricate satellite systems.

Design and application of coal gangue sorting system based on deep learning

With the advancement of science and technology, coal-washing plants are transitioning to intelligent, information-based, and professional sorting systems. This shift accelerates the construction a modern economic system characterized by green and low-carbon development, thereby promoting the high-quality advancement of the coal industry. Traditional manual gangue picking and multi-axis robotic arm gangue selection currently suffer from low recognition accuracy, slow sorting efficiency, and high worker labor intensity. This paper proposes a deep learning-based, non-contact gangue recognition and pneumatic intelligent sorting system. The system constructs a dynamic database containing key feature information such as the target gangue's contour, quality, and center of mass. The system elucidates the relationships between ejection speed, mass, volume, angle of incidence, and the impact energy matching mechanism. Demonstration experiments using the system prototype for coal gangue sorting reveal that, compared to existing robotic arm sorting methods in coal washing plants, this system achieves a gangue identification accuracy exceeding 97%, a sorting rate above 91%, and a separation time of less than 3 s from identification to separation, thereby effectively enhancing raw coal purity.

Klein tunneling and Fabry-Perot resonances in the α - T 3 bilayer with aligned stacking

This paper investigates the quantum tunneling effect on the α − T 3 bilayer with aligned stacking. An effective model is constructed to describe the properties around the triple band crossings for stacking with a vertical alignment of sites in the bilayer system. Focusing on these band crossings, it is found that while the energy spectrum remains gapless throughout, it is characterized by flat energy bands. Subsequently, the transmission coefficient, T, for Dirac quasi-electrons across a rectangular potential barrier is calculated, alongside the relationship between the transmission rate and the coupling parameter α. It is observed that super-tunnel phenomena occur at certain values of the quasiparticle energy, where the transmission is perfect regardless of the angle of incidence on the barrier, with α = 1. Furthermore, it is found that for a wide range of parameter values, the transmittance evolves monotonically and exponentially with increasing alpha. The paper also highlights the occurrence of the Klein paradox in the system, where quasiparticles approaching the barrier with zero-angle incidence exhibit ideal quantum transparency.

Manipulation of Helicity-Dependent Photocurrent and Stokes Parameter Detection in Topological Insulator Bi2Te3 Nanowires.

Helicity-dependent photocurrent (HDPC) and its modulation in topological insulator Bi2Te3 nanowires have been investigated. It is revealed that when the incident plane of a laser is perpendicular to the nanowire, the HDPC is an odd function of the incident angle, which is mainly contributed by the circular photogalvanic effect originating from the surface states of Bi2Te3 nanowire. When the incident plane of a laser is parallel to the nanowire, the HDPC is approximately an even function of the incident angle, which is due to the circular photon drag effect coming from the surface states. It is found that the HDPC can be effectively tuned by the back gate and the ionic liquid top gate. By analyzing the substrate dependence of the HDPC, we find that the HDPC of the Bi2Te3 nanowire on the Si substrate is an order of magnitude larger than that on SiO2, which may be due to the spin injection from the Si substrate to the Bi2Te3 nanowire. In addition, by applying different biases, the Stokes parameters of a polarized light can be extracted by arithmetic operation of the photocurrents measured in the Bi2Te3 nanowire. This work suggests that topological insulator Bi2Te3 nanowires may provide a good platform for opto-spintronic devices, especially in chirality and polarimtry detection.

NANOSCALE PATTERN FORMATION ON SURFACES BY CLUSTER ION BEAM IRRADIATION

Abstract Ion beam sputtering is a solid-surface nanostructuring procedure applicable to any type of material. In this study, we are interested in the bombardment of a metallic surface, specifically, of a Co(110) surface bombarded with Ar clusters at oblique incidence. The bombardment with clusters accentuates the effect of surface ripple formation. Sputter erosion and surface atomic redistribution are the processes that determine the morphological evolution of the surface from the collisional point of view. The importance of these processes was analyzed for different angles of incidence in the bombardment with very small clusters and atoms while always maintaining the same fluence. The sputter yield increases with the number of atoms in the cluster for angles greater than 50º; while for the rest, it barely experiences any increase. Unlike sputtering, displacements increase as the cluster size increases above the critical angle. Moreover, horizontal displacement only shows some sign of saturation for angles close to the normal. An analysis of redistributed volumes and previous data suggest that sputtering drives the ripple effect for grazing angles and ones close to these. It is also responsible for the enhancement effect in the cluster bombardment. For the rest of the angles, the weight of the redistribution is decisive. There is a proportional relationship between the emptied volume and the horizontal displacement.

Enhanced Photoemission Performance of InGaN Inclined Nanowire Array.

We propose to improve the solar energy utilization by using InGaN inclined nanowire array photocathodes. We first study vertical nanowire array. On the basis of vertical nanowire array, we study inclined nanowires by changing the inclination angle of nanowires. The inclined nanowires exhibit higher quantum efficiency at larger period and larger inclination angle. However, the infinite expansion of period will cause its performance to degrade. The quantum efficiency of inclined nanowires with a period of 175 nm and an inclination angle of 5.35° is as high as 80.2% when the incident light angle is irradiated at 5°. In addition, applying an electric field can improve the collection efficiency of inclined nanowires and help them maintain a high collection efficiency over a longer wavelength range. The design principles proposed in this work will provide a theoretical reference for the performance improvement of InGaN photocathodes.

Vanadium dioxide-assisted switching of a half-wave and quarter-wave plate to a dual-band absorber for the terahertz wave

In this study, we present a broadband, multi-functional, and switchable metamaterial for terahertz (THz) waves. The metamaterial design achieves high polarization conversion efficiency and can seamlessly transition between a polarization converter (PC) and a dual-band absorber through the phase transition behavior of vanadium dioxide (VO2). Our design facilitates linear to-cross (Half-wave plate) and linear to-circular (Quarter-wave plate) polarization conversion across a bandwidth extending from 0.58 THz to 0.88 THz, and 0.35 THz to 0.50 THz respectively. Near-perfect absorption at 0.35 THz and 0.99 THz was observed when VO2 changed its phase from an insulator to a conductor. These broadband features are realized through a straightforward metamaterial design incorporating only a reflector, a dielectric spacer, and an antenna (meta-atom resonator). Our designed structure demonstrates impressive angular stability for incident angles ranging from 0° to 45°. The proposed switchable metamaterial holds promise for advancing the development of tunable polarization rotating devices and on/off switching LPC devices, offering broad applications in THz detection, sensing, and communications.

Plane SV-waves scattering by seawater convex surface topography and underlying lined tunnel in a saturated half-space

Analytical solutions of boundary-valued problems for aboveground topography and underground buried structures, especially for sites with overlying seawater, have always been challenging. Based on the region decomposition technique (RDT) and Hankel integral transform method (HITM), SV-waves scattering by the convex circular topography with seawater and underlying tunnel in a saturated half-space is solved. The primary problem is tackling additional scattered waves introduced by the water–soil interface and convex topography, while ensuring boundary conditions are all met. To this end, scattering wave potential functions in cylindrical coordinates are first transformed into the Hankel integral form in Cartesian coordinates. This greatly facilitates the straightforward application of free boundary conditions at the soil–seawater flat interface, rather than making a large circular arc approximate assumption, which, in turn, avoids the resultant accumulating errors. Secondly, scattering problem to be solved is mathematically and analytically formulated as solving a 5 × 5 linear equation system comprised of wave functions inside the convex topography and lining tunnel while satisfying all physical continuous boundary conditions. This is the main innovation and resulting consequence from the theoretical derivation process. Finally, validation of numerical examples between this paper, existing studies and theoretical analysis further demonstrates the reliability and general adaptability of solutions. Parametric studies of the incident SV waves are conducted to investigate the spatially varying seismic response. The effects of SV-waves incident angles and frequencies, tunnel burial depth, tunnel lining thickness, saturated soil porosity, and seawater depth are investigated and analyzed in detail. This study provides a feasible scheme of investigating the dynamic response of complex submarine sites, which is of great significance for both theoretical value and engineering purposes.

Development of an angle-adjustable photonic crystal fluorescence platform for sensitive detection of oxytetracycline.

We pioneered an angle-adjustable photonic crystal fluorescence platform (APC-Fluor) that integrates PCs, an angular resolution spectrometer and a strategically aligned laser source. This configuration, featuring a coaxial rotating swing arm, allows for precise control over the angles of incidence and emission. The presence of photonic crystal microcavities facilitates the dispersion of fluorescent materials and promotes the transition of electrons from the excited state to the lowest vibrational energy level. The optical resonance effect triggered by modulating the alignment of the reflection peaks of the photonic crystals with the emission peaks of the fluorescent materials can significantly enhance the fluorescence intensity. Compared with the single BSA-AuNCs, the optimized fluorescence intensity can be significantly increased by 11.9-fold. The APC-Fluor system showcases rapid and highly sensitive detection capabilities for oxytetracycline (OTC), exhibiting a response across a concentration range from 2 to 1 × 104 nM and achieving a notably low detection limit of 1.03 nM.

Ultra-broadband and thin switchable multifunctional metamaterial for terahertz wave

An ultra-broadband thin multi-functional and switchable metamaterial is examined in the terahertz (THz) regime. The proposed design achieved high polarization conversion efficiency and can be switched from a polarization converter to an absorber using the phase change transitioning of vanadium dioxide (VO2). The linear polarization conversion is achieved from 6.0 THz to 15.0 THz, achieving a bandwidth of 9.0 THz, and the absorption is realized from 5.0 THz to 16.0 THz with a bandwidth of 11.0 THz. These broadband characteristics were achieved by a simple metamaterial design incorporating a few layers. The relative bandwidth was 85% for the polarization conversion and 105% for the absorption. Moreover, the angular stability of the designed structure is impressive for various incident angles from 0° to 45°. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices, on/off switching LPC devices, which have wide application potentials in THz detection, sensing, adaptive optics, and communications.

Modification of algorithm for accurate estimation of Hp(3) based on response of head TLD badge calibrated using ISO cylindrical phantom.

In India, the prevailing approach to eye lens dosimetry is the placement of an existing dosemeter on the forehead region after slight modification serves as a dedicated Eye Lens Dosemeter. A methodology for estimating the eye lens dose in terms of the Hp(3) has been previously explored employing an algorithm based on the response characteristics of this dosemeter using ISO slab phantom. It was observed that the performance of the dosemeter in terms of Hp(3) using previous algorithm showed under response at higher angles of incidence and photon beams of energy < 200keV. Further, study was conducted to modify the algorithm following the latest ISO recommendations. This involved generation of data from the response of existing dosemeter on a cylindrical phantom. The results of this study revealed better performance of the newly established algorithm in estimating eye lens dose in terms of Hp(3) when compared to the earlier algorithm.

1D Topological Photonic Crystal based Nanosensor for Tuberculosis Detection.

In this study, we present a nanosized biosensor based on the photobiological properties of one-dimensional (1D) topological photonic crystals (PCs). A topological structure had been designed by combining two photonic crystal structures (PC 1 and PC 2) comprised of functional material layers, Si and SiO2. These two, PC 1 and PC 2, differ in terms of the thickness and arrangement of these dielectric materials. We carried out a comparison between two distinct topological photonic crystals: one using random photonic crystals, and the other featuring a mirror heterostructure. Tuberculosis may be diagnosed by inserting a sensor layer into 1D topological photonic crystals. The sensing process is based on the refractive indexes of the analytes in the sensor layer. When the 1D-topological heterostructure-based PC and its mirror-image structures are stacked together, the sensor becomes more efficient for analyte detection than the conventional PCs. The random-based topological photonic crystal outperformed the heterostructure-based topological photonic crystal in analyte sensing. Photonic media witness notable blue shifts due to the analytes' variations in refractive index. The numerical results of the sensor are computed using the transfer matrix approach. Effective results are achieved by optimizing the thicknesses of the sensor layer and dielectric layers; number of periods and incident angle. In normal incident light, the developed sensor shows a high sensitivity of 1500 nm/RIU with a very low limit of detection in the order of 2.24E-06 RIU and a high-quality factor of 30659.54.

Passively Broadband Tunable Dual Circular Dichroism via Bound States in the Continuum in Topological Chiral Metasurface.

Dynamic control for a strong circular dichroism (CD) response is essential in engineering applications such as polarization manipulation, sensing, and imaging. Here, we propose and experimentally demonstrate a broadband tunable dual CD response via bound states in the continuum (BICs) in two-dimensional topologically protected metasurfaces composed of all-dielectric Si chiral grating structures that generate a pair of mixed and degenerated BIC mode and circular dichroic mode (CDM) as an additional degree of freedom in CD manipulation. It is found that a singular CD peak of nearly 100% at 1.6 μm can be achieved by CDM when BIC is hidden under normal incidence, while the CD peak can be split into two in which peak wavelengths can be precisely and linearly tuned over a bandwidth of 180 nm by the incident angle when the BIC mode is excited under oblique incidence. Additionally, dynamic modulation of output polarization states from linear to circular can be arbitrarily achieved at the split CD peaks by controlling the incident angle when asymmetry perturbations on chiral gratings are introduced due to the decoupling of various polarization states at Γ point by BIC to different positions in K space. The proposed chiral grating metasurface exhibits unique angle-sensitive tunable CD spectral characteristics, making it ideal for hyperspectral and spin-selective wavefront shaping, and holds significant promise in various applications such as optical security, angle sensors, chiral lasers, nonlinear filters, and other active chiral optical devices.

Tuning the high reflectance Goos-Hänchen shift based on quasi-bound states in the continuum through vanadium dioxide material asymmetric metasurface

To dynamically tune the high-reflectance Goos and Hänchen (GH) shift, a vanadium dioxide metasurface is proposed in this paper, whose material asymmetry parameter can be tuned by the ambient temperature. The material symmetry and geometric symmetry of the metasurface are broken by controlling the material asymmetry parameter γ and incident angle θ, and three symmetry-protected quasi-bound states in the continuum (QBICs) resonances with high-quality factors are excited. Based on the electric/magnetic field vector and multipole decomposition, the three QBIC resonances are excited due to the magnetic quadrupole. The QBIC resonances are applied to dynamically tune the high-reflectance GH shift, and the influence laws of γ and θ on the high-reflectance GH shift are analyzed.

Tunable liquid crystal double-layer frequency selective surface with wide transmission band and small insertion loss

ABSTRACT In this paper, a tunable Frequency Selective Surface (FSS) based on liquid crystal (LC) with a wide transmission band, large tuning range, high tuning rate, and miniaturization is designed. First, a single-layer FSS is developed with two frequency selective layers and one LC tunable layer. The simulation and experiment results show that the single-layer FSS has a transmission bandwidth greater than 4.25 GHz, and the LC change can make the center frequency of the transmitted band shift to the lower frequency by 576 MHz, with a tuning rate of 4.2%. Subsequently, a double-layer FSS is designed by adding a coupling layer to the single-layer FSS, achieving a flat-top passband and enhancing the tuning rate. Simulation and experimental validation show that altering the LC state enables continuous tuning of the center frequency of the double-layer FSS from 14.95 GHz to 13.86 GHz, with a tuning rate of 7.2%. This structure exhibits a flat-top passband wider than 5.7 GHz, a relative bandwidth of 41%, and a rectangular coefficient below 1.877. Moreover, the double-layer FSS demonstrates favorable polarization stabilization and wide incidence angle stabilisation properties in various states.

Absorption and Reflection of Switchable Multifunctional Metamaterial Absorber Based on Vanadium Dioxide

A dynamically tunable terahertz broadband absorber based on the metamaterial structure of vanadium dioxide (VO2) is proposed and analyzed. The absorber consists of two patterned VO2 layers and a metal bottom layer separated by two polytetrafluoroethylene (PTFE) dielectric layers. Simulation results show that the absorption exceeds 90% in the frequency range of 2.4–11 THz with a relative bandwidth of 128.4% under normal incidence. When VO2 is in the metal phase, the designed absorber functions as an ideal absorber. The absorption rate can be flexibly adjusted from 2% to 99% as vanadium dioxide transitions from the insulator phase to the metal phase. Therefore, the newly developed broad structure has the capability to seamlessly transition between functioning as an absorber or reflector through modifications in the conductivity of VO2 from the insulator phase to the metal phase. Moreover, further insight into the underlying physical processes can be gained by studying the insensitivity of the proposed absorber to the polarization of incident light and its ability to achieve high absorption across a wide range of incident angles. Impedance matching theory and electric field distribution of the absorber are investigated. The THz absorber has many potential applications in fields such as THz sensors, modulation, and switches.

Reflective anomalous beam splitter (RABS) metasurface for millimeter-wave (mm-Wave) frequency

Metasurfaces have gained a considerable amount of interest in the past decade for their capabilities to manipulate electromagnetic (EM) waves in different manners. They have offered multiple functionalities in terms of wave control depending on the given application. In terms of wave control, particularly EM beam splitting, it can be challenging compared to the given literature review, to achieve a wide number of beam-splitting reflections and coverage for multiple incident angles simultaneously. In this paper, we focus on the design of a metasurface based on the methodology of high periodicity supercell design (5.76λ) and impedance modulation to achieve a various number of beam-splitting angles, while maintaining the same coverage at multiple incident angles for millimeter-wave (mm-Wave) frequencies. Following the generalized phase law of reflection alongside proper optimization of the surface impedance, the proposed reflective anomalous beam splitter (RABS) metasurface is designed to be polarization independent, and high reflection efficiency is achieved with a wave beam split into 11 different directions while operating for multiple incident angles simultaneously, making it a promising candidate to overcome challenges for various mm-Wave communication applications, especially in expanding 5G coverage in non-line of sight regions at a 28 GHz frequency band. The performance of the RABS metasurface is evaluated using both full-wave simulations and experimental measurements, which demonstrate its effectiveness in achieving 11 efficient reflective anomalous beams with a reflection efficiency of up to 96.65% and 97.36% in TE and TM modes at 28 GHz.

Solar Window Innovations: Enhancing Building Performance through Advanced Technologies

Building-integrated photovoltaic (BIPV) glazing systems with intelligent window technologies enhance building energy efficiency by generating electricity and managing daylighting. This study explores advanced BIPV glazing, focusing on building-integrated concentrating photovoltaic (BICPV) systems. BICPV integrates concentrating optics, such as holographic films, luminescent solar concentrators (LSC), Fresnel lenses, and compound parabolic concentrators (CPCs), with photovoltaic cells. Notable results include achieving 17.9% electrical efficiency using cylindrical holographic optical elements and crystalline silicon cells at a 3.5× concentration ratio. Dielectric CPCs showed 97.7% angular acceptance efficiency in simulations and 94.4% experimentally, increasing short-circuit current and maximum power by 87.0% and 96.6%, respectively, across 0° to 85° incidence angles. Thermochromic hydrogels and thermotropic smart glazing systems demonstrated significant HVAC energy savings. Large-area 1 m2 PNIPAm-based thermotropic window outperformed conventional double glazing in Singapore. The thermotropic parallel slat transparent insulation material (TT PS-TIM) improved energy efficiency by up to 21.5% compared to double glazing in climates like London and Rome. Emerging dynamic glazing technologies combine BIPV with smart functions, balancing transparency and efficiency. Photothermally controlled methylammonium lead iodide PV windows achieved 68% visible light transmission, 11.3% power conversion efficiency, and quick switching in under 3 min. Polymer-dispersed liquid crystal smart windows provided 41–68% visible transmission with self-powered operation.

Tunable nonreciprocal thermal emitter based on graphene/indium arsenide/silver microstructure

Nonreciprocal thermal radiation has been studied by people. However, previous research has mainly focused on TM waves. Therefore, this article investigates a nonreciprocal transmitter based on TE transverse waves. Nonreciprocal emitters completely violate Kirchhoff's law and can be applied to various thermal radiation devices. However, there is little research on tunable nonreciprocal thermal emitters. In this article, we innovatively replace the previous top metal grating structure with a graphene grating. The gate voltage of graphene can regulate the nonreciprocal radiation intensity of the device in this article, without the need to resimulate the structure, and can achieve tunable strong nonreciprocal radiation effects. When the incident angle is 30°, the azimuth angle is 72° and the external magnetic field is 3 T, the thermal emitter can obtain strong nonreciprocal thermal radiation at a wavelength of about 16.6 μm. The difference between emissivity and absorptivity is greater than 0.91, indicating the presence of significant strong nonreciprocal radiation. We explained the physical background of this effect by studying the electromagnetic field distribution at the resonance peak.

Solar Window Innovations: Enhancing Building Performance through Advanced Technologies

Building-integrated photovoltaic (BIPV) glazing systems with intelligent window technologies enhance building energy efficiency by generating electricity and managing daylighting. This study explores advanced BIPV glazing, focusing on building-integrated concentrating photovoltaic (BICPV) systems. BICPV integrates concentrating optics, such as holographic films, luminescent solar concentrators (LSC), Fresnel lenses, and compound parabolic concentrators (CPCs), with photovoltaic cells. Notable results include achieving 17.9% electrical efficiency using cylindrical holographic optical elements and crystalline silicon cells at a 3.5× concentration ratio. Dielectric CPCs showed 97.7% angular acceptance efficiency in simulations and 94.4% experimentally, increasing short-circuit current and maximum power by 87.0% and 96.6%, respectively, across 0° to 85° incidence angles. Thermochromic hydrogels and thermotropic smart glazing systems demonstrated significant HVAC energy savings. Large-area 1 m2 PNIPAm-based thermotropic window outperformed conventional double glazing in Singapore. The thermotropic parallel slat transparent insulation material (TT PS-TIM) improved energy efficiency by up to 21.5% compared to double glazing in climates like London and Rome. Emerging dynamic glazing technologies combine BIPV with smart functions, balancing transparency and efficiency. Photothermally controlled methylammonium lead iodide PV windows achieved 68% visible light transmission, 11.3% power conversion efficiency, and quick switching in under 3 min. Polymer-dispersed liquid crystal smart windows provided 41–68% visible transmission with self-powered operation.