Improvement Of Cell Efficiency Research Articles

Numerical analysis on performance evaluation of photovoltaic thermal systems using ternary hybrid nanofluids and forced convection around copper cylinders

This study evaluates the performance of a photovoltaic thermal (PV/T) system using forced convection and ternary hybrid nanofluids, comprising water with cobalt, zinc, and silver. The PV/T system includes a glass absorber, polycrystalline silicon, and a flow channel with eight copper cylinders, positioned at 20 %, 40 %, 60 %, and 80 % along the channel, both above and below the flow path for optimal thermal conductivity. The working fluid is modeled under turbulent, steady-state conditions using the κ−ε turbulence model.Numerical simulations via COMSOL Multiphysics 6.0 evaluate the system's thermal and fluid dynamics, focusing on local Nusselt numbers and photovoltaic cell thermal efficiency compared to a baseline. The investigation spans Reynolds numbers from 10,000 to 100,000, nanoparticle volume fractions of 1 %–20 %, and aspect ratios of 0.1–0.3. The aspect ratio in this study is defined as the ratio of the height of a square obstacle within the flow channel to the total height of the flow channel. A supervised machine learning framework develops predictive regression models for system analysis. Results show fluid force at the outlet increases by about 1200 % and 1300 % for aspect ratios of 0.1 and 0.3 as the Reynolds number rises. The Nusselt number enhances by 420 % and 466 % at a 20 % nanoparticle volume fraction for aspect ratios of 0.1 and 0.3, respectively, with a 9 % improvement in photovoltaic cell efficiency. This work uniquely applies machine learning to derive regression equations for fluid force, Nusselt number, and electrical efficiency, an approach not previously explored in laminar flow studies.

Enhancing Multi-Junction Solar Cell Performance: Advanced Predictive Modeling and Cutting-Edge CIGS Integration Techniques

Historically, multi-junction solar cells have evolved to capture a broader spectrum of sunlight, significantly enhancing efficiency beyond conventional solar technologies. In this study, we utilized Silvaco TCAD tools to optimize a five-junction solar cell composed of AlInP, AlGaInP, AlGaInAs, GaInP, GaAs, InGaAs, and Ge, drawing on advancements documented in the literature. Our research focused on optimizing these cells through sophisticated statistical modeling and material innovation, particularly examining the relationship between layer thickness and electrical yield under one sun illumination. Employing III-V tandem solar cells, renowned for their superior efficiency in converting sunlight to electricity, we applied advanced statistical models to a reference solar cell configured with predefined layer thicknesses. Our analysis revealed significant positive correlations between layer thickness and electrical performance, with correlation coefficients (R2 values) impressively ranging from 0.86 to 0.96 across different regions. This detailed statistical insight led to an improvement in overall cell efficiency to 44.2. A key innovation in our approach was replacing the traditional germanium (Ge) substrate with Copper Indium Gallium Selenide (CIGS), known for its adjustable bandgap and superior absorption of long-wavelength photons. This strategic modification not only broadened the absorption spectrum but also elevated the overall cell efficiency to 47%. Additionally, the optimization process involved simulations using predictive profilers and Silvaco Atlas tools, which systematically assessed various configurations for their spectral absorption and current–voltage characteristics, further enhancing the cell’s performance. These findings underscore the critical role of precise material engineering and sophisticated statistical analyses in advancing solar cell technology, setting new efficiency benchmarks, and driving further developments in the field.

Porosity and permeability optimization of PEMFC cathode gas diffusion layer based on topology algorithm

The gas diffusion layer (GDL) is a crucial component in proton exchange membrane fuel cells (PEMFCs), significantly affecting mass transport and overall cell performance. Due to the pronounced pressure gradients and uneven mass transfer between the inlet and outlet of the serpentine flow field, this study proposes the design of a GDL with a concentration gradient to optimize performance. Leveraging topological optimization algorithms, the research focuses on enhancing the mass transport properties and improving cell efficiency. The optimization process considers the pressure distribution, oxygen concentration, and water content within the serpentine flow field as boundary conditions. By optimizing the porosity and permeability of the GDL in different regions, the study aims to enhance the GDL's mass transport capabilities. Simulation results demonstrate that initializing the porosity at 1 provides superior optimization, significantly enhancing mass transfer and overall cell performance. Although increased permeability contributes to improved mass transport, its impact is less significant compared to porosity optimization. Therefore, GDL porosity is identified as the dominant factor in enhancing cell performance, while permeability adjustments play a secondary role.

Natural dyes (Tithonia diversifolia, Tagetes minuta and Bidens pilosa) sensitized solar cells with reduced graphene based electrodes

The search for suitable alternatives to non-renewable polluting energy sources is a continuous and an active undertaking. There is particular focus towards production of low cost, eco-friendly and more efficient dye sensitized solar cells (DSSCs). Natural dyes DSSCs have the capability of generating green energy at low production cost and hence become a promising class of photovoltaic cells. However, there are inherent problems encountered by the conventional DSSCs including photoanode and cathode related problems such as high cost and electron-hole recombination resulting in a low rate of photoelectric conversion efficiency. In this work, organic dyes from Tithonia diversifolia, Tagetes minuta and Bidens pilosa were used as sensitizers as replacement of synthetic dyes of the conventional DSSCs. The study in addition sought to replace conventional photoanode and cathodes with rGO-TiO2 photo anode and rGO counter electrode. The Tithonia diversifolia has one absorption peak at 665 nm indicating the presence of chlorophyll dye while Tagetes minuta has absorbption peaks at 534 nm suggestive of anthocyanin dye (a flavonoid), 607 nm and 660 nm confirming the presence of chlorophyll a dyes while Bidens pilosa has an absorption peak at 665 nm which again suggests the presence of chlorophyll dye. The tendency of the three natural dyes to absorb in the regions above 650 nm indicates their usefulness for use as dyes for DSSC. The I-V curves of the fabricated natural DSSCs show that when TiO2 is used as the photo anode, Tithonia diversifolia registered a higher efficiency of 0.18 % while Tagetes minuta had the lowest efficiency of 0.08 %. When rGO is incorporated in the TiO2 photo anode, there is an improvement in the solar cell efficiency for all the fabricated DSSCs with Tithonia diversifolia having the highest at 1.56 %. Thus incorporating rGO in the TiO2 photo anode greatly improved the power conversion efficiency of the DSSC. Tithonia diversifolia dye had the highest efficiency which may be attributed to the concentration of the chlorophyll dye.

Q.ANTUM NEO with LECO Exceeding 25.5 % cell Efficiency

In recent years, we have developed the Q.ANTUM NEO solar cell, a rear-passivated double-sided contact solar cell that achieves power conversion efficiencies exceeding 25.5 %. Our streamlined and cost-efficient process leverages the proprietary Laser Enhanced Contact Optimization (LECO) technology. The LECO process has undergone extensive optimization and has been successfully implemented in both our pilot line and mass production facilities, resulting in significant improvements in solar cell efficiency. LECO facilitates a novel formation of the contact interface between the silicon surface and metallization, leading to remarkably low j0,met values (as low as 160 fA cm−2). The contact resistivity of 20 μm wide contacts on a high sheet resistance emitter is below 1 mΩ cm2, with minimal impact on fill factor (FF) and overall cell efficiency. Rigorous reliability tests, including TC600 and DH3000, demonstrate module degradation well below 5%rel. Our champion cell conversion efficiency achieved in the pilot line using LECO technology reaches 25.6 %, accompanied by a notable open-circuit voltage exceeding 730 mV.

Improved preparation of AgNW film and its application in flexible counter electrodes of dye-sensitized and perovskite solar cells

Silver nanowire (AgNW) has been wildly used to prepare flexible conducting substrate of electronic and optoelectronic devices. By coating a layer of carbon onto a polymer/AgNW substrate, a counter electrode (CE) was obtained and it offers the advantages of high flexibility, light weight, low cost, simple fabrication, and operating efficiently in dye-sensitized solar cells (DSSCs) and perovskite solar cells (PSCs). By modifying the traditional unidirectional roll-coating process of AgNW to cross-directional coating, the morphology and distribution of the AgNW network was improved, which led to increased transmittance and electroconductivity, and subsequently improved cell efficiency of DSSCs and PSCs. The performance of the CEs and solar cells was further promoted by optimized fabrication process of the carbon layer. The as-prepared flexible CEs achieved great enhancement of cell efficiencies, and maximum power conversion efficiencies of 5.17% and 14.32% were obtained by DSSCs and PSCs, respectively.

Organic solar cell efficiency improvement through architecture engineering by integrating carbon nanoring – SCAPS 1D modelling

This research work aims to investigate on improving the performance of organic solar cells (OSC) by proposing new architectures that progressively integrate carbon nanotubes. This contribution takes into account the exceptional properties of carbon nanotubes (CNT) highlighted in recent work, with the aim of addressing the current challenges of materials used in the manufacture of conventional OSCs, such as reactivity with the ambient medium, stability over time, better transport of charge carriers, etc. Using a reference OSC cell with the following structure: PEDOT/BHJ/PDINO and the numerical one-dimensional simulation tool SCAPS, which helps in validating the modelling approach, we gradually replace each layer with a CNT-based material exhibiting superior properties. In this respect, we carry out calculations on the different cells architectures, to better visualize energy-level alignment profiles, the different current-voltage (J-V), and quantum efficiency (QE) characteristics. Approaches toward efficiency improvement were discussed, by investigating the effects of active layer thickness, the doping level, the charge carriers mobility, defect density, and external parameters such as temperature. After numerous calculations and modelling, very promising results were finally achieved with a full CNT-based solar structure with the following recorded performances: VOC=0.87V, JSC=27.81mA/cm2, FF=80.91%, and PCE=19.63%. These results are the first theoretical report for a complete CNT-based modelled OSC and, given the reliability and robustness of the approach adopted, they can be considered as relevant for future theoretical and experimental work. The integration of CNT as functional layers is a remarkable step forward in OSC architectures engineering for efficiency enhancement. CNT are good candidates for light harvesting applications.

Thermal management of ultra high concentrator photovoltaic cells: Analysing the impact of sintered porous media microchannel heat sinks

Implementing advanced cooling strategies is essential to maintaining recommended operation conditions, enhancing energy efficiency, and extending the reliability of ultra-high concentrator photovoltaics. This study introduces a new application of sintered porous media as an effective and superior thermal management solution for ultra-high concentrator photovoltaic systems. Furthermore, predictive models for thermal and electrical performance are developed.A comprehensive three-dimensional computational fluid dynamics model was developed and verified against experimental work reported to investigate the performance of a novel sintered porous media for thermal management in ultra-high concentrator photovoltaics. Furthermore, the response surface methodology coupled with analysis of variance was used to analyze and comprehensively optimize the thermal management system. The main objective is to develop a predictive model for such systems equipped with a porous cooling system that predicts performance with a concentration ratio of up to 20000 Suns. Predictive models were formulated to outline the relationships between various independent variables: Reynolds number, concentration ratio, direct normal irradiance, wind speed, optical efficiency, fluid inlet temperature, and dependent performance metrics.This study highlights the effectiveness of sintered porous media in heat dissipation and efficiency enhancement in ultra-high concentrator photovoltaics thermal management. The results demonstrate that using sintered porous media compared to conventional channel heatsinks significantly enhances cell thermal management. Specifically, this approach reduces cell temperature by 15.3%, 8.97%, and 2% at concentration ratios of 20000, 10000, and 2000, respectively. Concurrently, implementing the new sintered porous media heatsink improves cell efficiency by 3.1%, 1.5%, and 0.3% for the same respective concentration ratio values.

Coordinated optimization of methanol utilization and in-situ cracking reforming in proton-conductive solid oxide fuel cells

Proton-conductor solid oxide fuel cells (PC–SOFCs) have demonstrated innovative capabilities in energy applications, particularly for the efficient transformation of biomass fuels into hydrogen for power generation. Methanol, a readily available and economical biomass fuel with a high hydrogen content, has shown significant potential for waste utilization and energy recovery. Consequently, this study employed methanol as a fuel for PC-SOFCs and investigated the optimal operating conditions through meticulously designed experiments. This study also enhanced the cell performance through the co-reforming of steam and methanol, demonstrating that the introduction of steam during the methanol-reforming process significantly improved cell efficiency. At a 30 % methanol fuel concentration and a 700 °C operating temperature, co-reforming increased the maximum power density (MPD) from 0.269 to 0.352 W cm−2. Additionally, integrating Ru-GDC nanofiber catalysts into the anodic dendritic microchannels enabled the creation of an in-situ catalytic cracking reactor, further boosting MPD to 0.412 W cm−2. The catalyst-equipped cell demonstrated stable operation for continuous 102 h at a current density of 0.6 A cm−2, with no performance decline, thereby confirming the exceptional long-term stability of the system.

Renewable energy storage using hydrogen produced from seawater membrane-less electrolysis powered by triboelectric nanogenerators

Utilization of widely available seawater for hydrogen generation using robust electrolysis methods can provide sustainable solutions to energy carriers. Sea waves at the same time provide abundant renewable energy that can produce the electricity required for seawater electrolysis. This work presents a novel design for a self-powered hydrogen generation based on membrane-less seawater electrolysis integrated with spring-assisted spherical triboelectric nanogenerators. To streamline fabrication and minimize maintenance expenses, water electrolysis is conducted in a membrane-less electrochemical cell reactor. Employing a mathematical model, the system's performance is analyzed across different catalysts, electrolytes, and operational temperatures. The modeling outcomes indicate that elevating the cell's temperature can lower the necessary potential, enhancing overall electrochemical cell efficiency and decreasing capacitor charging duration. The voltage required for the cell to reach 100 mA cm−2 in the seawater decreases from 2.4 V to 1.9 V as the cell temperature increase from 25 °C to 70 °C. This is due to the decline in the hydrogen and oxygen evolution reaction overpotentials for NPNNS and Ti supported PtPd from 351 mV to 246 mV and 568 mV–394 mV, respectively. Furthermore, increase in the temperature results in an additional 19 % improvement in cell efficiency from 78 % to 97 % and producing hydrogen per cycle during electrolysis of seawater increase from 0.015 μmole to 0.020 μmole.

The performance of floating Photovoltaic system over a small pond in Jakarta.

It is recognized that photovoltaic (PV) cells exhibit a drawback when subjected to significant temperature increases. This paper presents an initial study of the performance of Floating PV (FPV) over a pond, encompassing the effect of the PV panel’s surface temperature on the variation of the PV cell efficiency. To facilitate this study, an experimental study was conducted. The experiment deployed four monocrystalline PV panels with a maximum power output (Pmax) of 100 Watts for each panel. These four panels were divided into two sets that each set contain two PV panels. The first set was installed over a small pond with an area of 24 m2 and a depth of 1.2 m, while the other set was placed over a concrete surface with the same area size. The steps of the experiment study were as follows: (1) to measure the PV panel’s surface temperature of the two sets, and (2) to calculate the operating PV cell efficiency using an energy balance equation. The measurement of the PV panel’s temperature was taken hourly from 08.00 AM to 04.00 PM on clear and cloudy day. The data on rainy day was excluded. The study was conducted in an urban area of Jakarta, where the average ambient temperature ranges between 25°C and 30°C. The experimental site conditions are relatively clear, only several trees located on the south of the area. The results indicated that pond has a significant effect on the reduction of the PV panel’s surface temperature as compared to the PV set over the concrete surface. The average temperature reduction is around 3.5°C on a clear day, whereas the maximum reduction is 7.8°C, when the irradiance level rises to around 1000 W/m2. Indeed, the observed improvement of the PV cell efficiency was approximately 3.9% at the highest and in average was around 2%.

Commercial Si Solar Cell Efficiency Improvement by Gamma Radiation, Plasma Treatment and Oxides Front Layer Depositions

Commercial Si Solar Cell Efficiency Improvement by Gamma Radiation, Plasma Treatment and Oxides Front Layer Depositions

Silicon solar cell efficiency improvement employing electrostatically assembled polyelectrolyte–quantum dot multilayers

Down-shifting (DS) has proven to be an effective technique to address thermalization losses in photovoltaic devices. It involves the modification of the incident solar spectrum by luminescent species to better suit solar cell’s optimal absorption regions. Despite the number of favorable characteristics of quantum dots (QDs) as DS materials, their incorporation into highly ordered close-packed films remains the major drawback of QD-based DS applications. This limitation can be overcome by the sequential integration of QDs into a multilayered film via the layer-by-layer assembly technique, that allows the precise control of composition and thickness. The experimental results discussed herein indicate that upon optimization employing a model-assisted design approach, the spectral response of a silicon solar cell benefits from the down-shifting and antireflection capabilities of the QD film, as evinced by their quantum efficiency. For the optimum design, the incorporation of QDs triggered an increment of 26.1% in the power conversion efficiency driven by an increase of 29.2% in the short circuit current density. The controlled assembly of QD multilayers offers unique opportunities in light harvesting for new hybrid photovoltaic technologies.

A novel multi-channel porous structure facilitating mass transport towards highly efficient alkaline water electrolysis

An advantageous porous architecture of electrodes is pivotal in significantly enhancing alkaline water electrolysis (AWE) efficiency by optimizing the mass transport mechanisms. This effect becomes even more pronounced when aiming to achieve elevated current densities. Herein, we employed a rapid and scalable laser texturing process to craft novel multi-channel porous electrodes. Particularly, the obtained electrodes exhibit the lowest Tafel slope of 79 mV dec−1 (HER) and 49 mV dec−1 (OER). As anticipated, the alkaline electrolyzer (AEL) cell incorporating multi-channel porous electrodes (NP-LT30) exhibited a remarkable improvement in cell efficiency, with voltage drops (from 2.28 to 1.97 V) exceeding 300 mV under 1 A cm−1, compared to conventional perforated Ni plate electrodes. This enhancement mainly stemmed from the employed multi-channel porous structure, facilitating mass transport and bubble dynamics through an innovative convection mode, surpassing the traditional convection mode. Furthermore, the NP-LT30-based AEL cell demonstrated exceptional durability for 300 h under 1.0 A cm−2. This study underscores the capability of the novel multi-channel porous electrodes to expedite mass transport in practical AWE applications.

Transient Photocurrents and Defect States in Hierarchically Structured ZnO Nanowires

ZnO‐nanostructured thin films can be used as electron transport layers in ordered heterojunction quantum‐dot solar cells. An increased interface between electron and hole‐transporting layers allows for a fast separation of the electron–hole pairs preventing their recombination. Consequently, an improvement of the overall solar cell efficiency is expected. ZnO hierarchical nanorod thin films can provide the desired increase in interface area. In this work, their properties are studied and compared with simple ZnO nanorod films. The ZnO nanorod films are synthesized hydrothermally by placing the quartz/indium‐tin‐oxide substrates in a solution of zinc nitrate hexahydrate and sodium hydroxide at 90 °C. Hierarchical structures are obtained through a second deposition step. Scanning electron microscopy is used to characterize the size and shape of the nanorods. Simple ZnO films display hexagonal nanorods with a diameter of around 150 nm while hierarchical films show additional 40 nm diameter nanorods growing on the side surfaces of the primary 150 nm nanorods. Optical transmittance spectroscopy reveals a bandgap around 3.35 eV. Current–voltage measurements in the high‐field regime of 104 V cm−1 are used to determine the density of trap states Nt through the application of trap‐filled limit current theory.

Gold nanostructures/quantum dots for the enhanced efficiency of organic solar cells.

Incorporating gold nanoparticles (AuNPs) into organic solar cell (OSC) structures provides an effective means to manipulate light-matter interactions. AuNPs have been used as plasmonic-enhancement and light-trapping materials in OSCs and exhibit diverse single and mixed morphologies. Substantial near-field enhancement from metal periodic structures has consistently demonstrated high enhancement in solar cell efficiency. Additionally, coupling with atomic gold clusters in the form of gold quantum dots holds promise for light harvesting through fluorescence phenomena. The configured devices optimize light utilization in OSCs by considering factors such as the morphology, position, and hybridization of localized surface plasmon resonance, propagating surface plasmon resonance, and fluorescence phenomena. This optimization enhances light absorption, scattering, and efficient trapping facilitated by gold nanostructures/quantum dots. The configured setup exhibits multiple effects, concurrently improving plasmonic and fluorescence responses under solar irradiation, thereby enhancing energy conversion performance. Integrating plasmonic nanostructures with OSCs can address fundamental issues, providing opportunities to enhance the light-absorption intensity and charge transfer efficiency at intra and intermolecular levels. This comprehensive review demonstrates that the greatest improvement in solar cell efficiency exceeded 30% compared with the reference cells.

Modulation of intermolecular interactions in hole transporting materials for improvement of perovskite solar cell efficiency: a strategy of trifluoromethoxy isomerization

A trifluoromethoxy isomerization strategy to modulate intermolecular interactions is proposed to balance the intermolecular interactions of hole transport materials and their interface interactions with perovskites.

Influence of defect in perovskite solar cell materials on device performance and stability

Perovskite solar cell material becomes one of the most attractive light absorbing materials in the photovolatic field due toits unique photoelectric characteristics, especially the rapid improvement of photoelectric conversion efficiency in the initial short period of time. However, in recent years, the growth of conversion efficiency has entered a slow stage, posing a challenge for subsequent development. In addition, the long-time stability of material has become a key barrier to widespread commerical applications. The emergence of these problems is closely related to the inevitable defects in the material in preparation process, because defect is usually regarded as one of the key factors hindering the improvement of photovolatic performance and materical stability. Therefore, a comprehensive understanding of the inherent defects of material is essential to improve cell efficiency and maintain long-time structural stability. In this paper, the effects of defects in perovskite material on photovolatic performance and stability are discussed in many aspects, including the traditional rigid defects, unconventional defects, complex defects, and ion migration. Second, this work also delves into how defects affect carrier lifetime and highlights their role in determining the overall cell performance. Such insights are very important in designing effective strategies to mitigate the adverse effects of defects on material performance and stability. Finally, we discuss the complex relationship between defects and structural stability, and recognize that the defects are a key factor affecting the long-term robustness of perovskite solar cells. The understanding of the mechanism behind the focus problems will help researchers achieve new ideas to improve the efficiency and duraibility of perovskite solar cell technology. Overall, this review not only provides the current state of knowledge on defects in perovskite materials, but also illustrates further research directions. By revealing the complex interplay between defects, photovoltaic performance and structural stability, researchers can find a way to break through the current limitations and realize the potential value of perovskite solar cell technology in the commercial applications. Thiswork aims to spark an in-depth discussion of this issue and further explore and innovate in this promising field.

Flutter and divergence zones of perovskite solar cell-based panels of aircraft wings in subsonic airflow

Solar-powered aircraft have advantages such as quite long flight time and resource conservation. In recent years, with the improvements in solar cell efficiency, lightweight structural design, microelectronics, and automation control technology, more and more countries and organizations have conducted research on solar-powered aircraft. Solar cells are an important component of solar-powered aircraft systems. Perovskite solar cells have the advantages of high flexibility, lightweight, and high specific power, making them the ideal material for solar-powered aircraft wings. To receive as much sunlight radiation as possible and improve the lift-to-drag ratio of the entire aircraft, solar-powered aircraft have a high aspect ratio, making them more sensitive to changes in airflow. Therefore, the stability zones and vibration of perovskite solar cell (PSC) panels in subsonic airflow were studied for the first time. Additionally, to enhance the novelty of the paper and present more comprehensive results, the effect of the nanomaterial properties of one-layered perovskite solar cell substrates reinforced by carbon nanotubes and graphene platelets on the flutter and divergence phenomenon was investigated. To accurately simulate the displacement field after the composite perovskite panel is bent, Reddy's high-order shear deformation theory was adopted. The PSC panel's aerodynamic-elastic coupling motion equations were established by combining Hamilton's principle with the linear potential flow theory and the Bernoulli equation. The dynamic equations were discretized using a meshless numerical method to obtain the generalized multi-parameter characteristic equations. The obtained natural frequencies and critical divergence speeds were compared with published literature to validate the correctness of the aerodynamic model and laminated board model. The divergence instability and flutter instability of the PSC nanocomposite panel were investigated for changing the thickness, nano-fillers, porosity, laying angle, and aspect ratio of the substrate. We showed, that the PSC panel has a divergence instability state first, and then flutter instability appears. Additionally, the substrate nanomaterial parameters of the PSC panel significantly affect shifting divergence and flutter zones. Interestingly, the corresponding natural frequency increases when flutter occurs with an increase in the porosity volume.

Study of thermal effects in ammonia-fueled solid oxide fuel cells

Ammonia is regarded as a promising alternative to hydrogen because of its high hydrogen content, ease of transportation and storage, and other favorable properties. However, in ammonia-fueled solid oxide fuel cell (SOFC), the intense heat absorption and excretion of ammonia decomposition and electrochemical reactions can lead to inhomogeneous temperatures inside the cell, which restricts long-life operation. For this reason, a three-dimensional tubular solid oxide fuel cell thermo-electrochemical model is established to explore the thermal characteristics when using ammonia as the fuel. The errors between the power density and voltage obtained from the numerical model and the experimental data in the literature are less than 5 %, which proves the accuracy of the model in this paper. Further parametric simulations reveal that the electrochemical performance and heat production rate are strongly affected by the operating voltage. And a peak power density of 66.4 mW/cm2 is obtained at an operating voltage of 0.45 V. Additionally, increasing the inlet temperature and increasing the fuel flow rate are beneficial for improving cell efficiency, although achieving temperature uniformity remains a challenge. The ammonia pre-reforming degree can be adjusted to effectively improve the temperature distribution uniformity within the cell and improve its internal heat balance. The maximum temperature difference in 96 % pre-reformed SOFC is only 22 K, while it reaches 167 K in direct ammonia SOFC. The temperature and electrochemical performance laws revealed in this study provide a theoretical basis for the optimization of ammonia-fueled SOFC.