Important Reactions Research Articles

Palladium Catalysts for Methane Oxidation: Old Materials, New Challenges.

ConspectusMethane complete oxidation is an important reaction that is part of the general scheme used for removing pollutants contained in emissions from internal combustion engines and, more generally, combustion processes. It has also recently attracted interest as an option for the removal of atmospheric methane in the context of negative emission technologies. Methane, a powerful greenhouse gas, can be converted to carbon dioxide and water via its complete oxidation. Despite burning methane being facile because the combustion sustains its complete oxidation after ignition, methane strong C-H bonds require a catalyst to perform the oxidation at low temperatures and in the absence of a flame so as to avoid the formation of nitrogen oxides, such as those produced in flares. This process allows methane removal to be obtained under conditions that usually lead to higher emissions, such as under cold start conditions in the case of internal combustion engines. Among several options that include homo- and heterogeneous catalysts, supported palladium-based catalysts are the most active heterogeneous systems for this reaction. Finely divided palladium can activate C-H bonds at temperatures as low as 150 °C, although complete conversion is usually not reached until 400-500 °C in practical applications. Major goals are to achieve catalytic methane oxidation at as low as possible temperature and to utilize this expensive metal more efficiently.Compared to any other transition metal, palladium and its oxides are orders of magnitude more reactive for methane oxidation in the absence of water. During the last few decades, much research has been devoted to unveiling the origin of the high activity of supported palladium catalysts, their active phase, the effect of support, promoters, and defects, and the effect of reaction conditions with the goal of further improving their reactivity. There is an overall agreement in trends, yet there are noticeable differences in some details of the catalytic performance of palladium, including the active phase under reaction conditions and the reasons for catalyst deactivation and poisoning. In this Account we summarize our work in this space using well-defined catalysts, especially model palladium surfaces and those prepared using colloidal nanocrystals as precursors, and spectroscopic tools to unveil important details about the chemistry of supported palladium catalysts. We describe advanced techniques aimed at elucidating the role of several parameters in the performance of palladium catalysts for methane oxidation as well as in engineering catalysts through advancing fundamental understanding and synthesis methods. We report the state of research on active phases and sites, then move to the role of supports and promoters, and finally discuss stability in catalytic performance and the role of water in the palladium active phase. Overall, we want to emphasize the importance of a fundamental understanding in designing and realizing active and stable palladium-based catalysts for methane oxidation as an example for a variety of energy and environmental applications of nanomaterials in catalysis.

Alkyl, aryl and hetaryl acetylenes - highly reactive multifunctional compounds (a review)

The author’s data (2000-2022) on synthesis methods, reactivity and applied aspects of aryl- and hetarylacetylenes were summarized. The specificity of alkynylarenes (hetarenes) associated with the activation of the triple bond by acceptor groups were noted. Particular attention was paid to fundamentally important new reactions of heterocyclization and complete soft cleavage of the triple bond. The prospects for the use of alkynylarenes and -hetarenes and their modification products were reflected. The results of screening of the synthesized compounds were presented.

Strongly-Interacted NiSe2/NiFe2O4 Architectures Built Through Selective Atomic Migration as Catalysts for the Oxygen Evolution Reaction.

The interactions between the catalyst and support are widely used in many important catalytic reactions but the construction of strong interaction with definite microenvironments to understand the structure-activity relationship is still challenging. Here, strongly-interacted composites are prepared via selective exsolution of active NiSe2 from the host matrix of NiFe2O4 (S-NiSe2/NiFe2O4) taking advantage of the differences of migration energy, in which the NiSe2 possessed both high dispersion and small size. The characteristics of spatially resolved scanning transmission X-ray microscopy (STXM) coupled with analytical Mössbauer spectra for the surface and bulk electronic structures unveiled that this strongly interacted composite triggered more charge transfers from the NiSe2 to the host of NiFe2O4 while stabilizing the inherent atomic coordination of NiFe2O4. The obtained S-NiSe2/NiFe2O4 exhibits overpotentials of 290mV at 10mAcm-2 for oxygen evolution reaction (OER). This strategy is general and can be extended to other supported catalysts, providing a powerful tool for modulating the catalytic performance of strongly-interacted composites.

Plasma-based dry reforming of CH4: Plasma effects vs. thermal conversion

In this work we evaluate the chemical kinetics of dry reforming of methane in warm plasmas (1000–4000 K) using modelling with a newly developed chemistry set, for a broad range of parameters (temperature, power density and CO2/CH4 ratio). We compare the model against thermodynamic equilibrium concentrations, serving as validation of the thermal chemical kinetics. Our model reveals that plasma-specific reactions (i.e., electron impact collisions) accelerate the kinetics compared to thermal conversion, rather than altering the overall kinetics pathways and intermediate products, for gas temperatures below 2000 K. For higher temperatures, the kinetics are dominated by heavy species collisions and are strictly thermal, with negligible influence of the electrons and ions on the overall kinetics. When studying the effects of different gas mixtures on the kinetics, we identify important intermediate species, side reactions and side products. The use of excess CO2 leads to H2O formation, at the expense of H2 formation, and the CO2 conversion itself is limited, only approaching full conversion near 4000 K. In contrast, full conversion of both reactants is only kinetically limited for mixtures with excess CH4, which also gives rise to the formation of C2H2, alongside syngas. Within the given parameter space, our model predicts the 30/70 ratio of CO2/CH4 to be the most optimal for syngas formation with a H2/CO ratio of 2.

Oxidation of the 1‐naphthyl radical C10H7• with oxygen: Thermochemistry, kinetics, and possible reaction pathways

AbstractThe reaction of the 1‐naphthyl radical C10H7• (A2•) with molecular (3O2) and atomic oxygen, as part of the oxidation reactions of naphthalene, is examined using ab‐initio and DFT quantum chemistry calculations. The study focuses on pathways that produce the intermediate final products CO, phenyl and C2H2, which may constitute a repetitive reaction sequence for the successive diminution of six‐membered rings also in larger polycyclic aromatic hydrocarbons. The primary attack of 3O2 on the 1‐naphthyl radical leads to a peroxy radical C10H7OO• (A2OO•), which undergoes further propagation and/or chain branching reactions. The thermochemistry of intermediates and transition state structures is investigated as well as the identification of all plausible reaction pathways for the A2• + O2 / A2• + O systems. Structures and enthalpies of formation for the involved species are reported along with transition state barriers and reaction pathways. Standard enthalpies of formation are calculated using ab initio (CBS‐QB3) and DFT calculations (B3LYP, M06, APFD). The reaction of A2• with 3O2 opens six main consecutive reaction channels with new ones not currently considered in oxidation mechanisms. The reaction paths comprise important exothermic chain branching reactions and the formation of unsaturated oxygenated hydrocarbon intermediates. The primary attack of 3O2 at the A2• radical has a well depth of some 50 kcal mol−1 while the six consecutive channels exhibit energy barriers below the energy of the A2• radical. The kinetic parameters of each path are determined using chemical activation analysis based on the canonical transition state theory calculations. The investigated reactions could serve as part of a comprehensive mechanism for the oxidation of naphthalene. The principal result from this study is that the consecutive reactions of the A2• radical, viz. the channels conducting to a phenyl radical C6H5•, CO2, CO (which oxidized to CO2) and C2H2 are by orders of magnitude faster than the activation of naphthalene by oxygen (A2 + O2 → A2• + HO2).

Gender Differences in Pharmacokinetics: A Perspective on Contrast Agents.

Gender is an important risk factor for adverse drug reactions. Women report significantly more adverse drug reactions than men. There is a growing consensus that gender differences in drug PK is a main contributor to higher drug toxicity in women. These differences stem from physiological differences (body composition, plasma protein concentrations, and liver and kidney function), drug interactions, and comorbidities. Contrast agents are widely used to enhance diagnostic performance in computed tomography and magnetic resonance imaging. Despite their broad use, these contrast agents can lead to important adverse reactions including hypersensitivity reactions, nephropathy, and hyperthyroidism. Importantly, female gender is one of the main risk factors for contrast agent toxicity. As these adverse reactions may be related to gender differences in PK, this perspective aims to describe distribution and elimination pathways of commonly used contrast agents and to critically discuss gender differences in these processes.

Core-Shell Design of Metastable Phase Catalyst Enables Highly-Performance Selective Hydrogenation.

Highly selective semihydrogenation of alkynes to alkenes is a highly important reaction for catalytic industry. Developing non-noble metal based catalysts with platinum group metal-like activity and selectivity is extremely crucial yet challenging. Metastable phase catalysts provide a potential candidate to realize high activity, yet the control of selectivity remains an open question. Here, this work first reports a metastable phase core-shell: face-centered cubic (fcc) phase Ag (10 at%) core-metastable hexagonal closest packed (hcp) phase Ni (90 at%) shell catalyst, which represents high conversion rate, high selectivity, and remarkable universality for the semihydrogenation of phenylacetylene and its derivatives. More impressively, a turnover frequency (TOF) value of 8241.8 h-1 is achieved, much higher than those of stable phase catalysts and reported platinum group metal based catalysts. Mechanistic investigation reveals that the surface of hcp Ni becomes more oxidized due to electron transfer from hcp Ni shell to fcc Ag core, which decreases the adsorption capacity of styrene on the metastable phase Ni surface, thus preventing full hydrogenation. This work has gained crucial research significance for the design of high performance metastable phase catalysts.

Hexagonal boron nitride sheet-anchored palladium‑nickel nanoparticles for highly selective hydrogenation of cinnamaldehyde under mild conditions

Selective hydrogenation of cinnamaldehyde toward hydrocinnamaldehyde is an extremely important and challenging reaction. Herein, ultrafine PdNi bimetallic nanoparticles with different Pd to Ni ratios were uniformly anchored on hexagonal boron nitride nanosheet (BNNS) by a coprecipitation-reduction method. The resulting Pd4Ni0.6/BNNS (4 wt% Pd and 0.6 wt% Ni with respect to BNNS) catalyst displayed the excellent catalytic performance and gave the hydrocinnamaldehyde selectivity of 94 % with quantitative conversion of cinnamaldehyde under atmospheric pressure at 60 °C. Moreover, Pd4Ni0.6/BNNS had excellent reusability with a conversion of 92 % and a hydrocinnamaldehyde selectivity of 85 % after three recycle process. The high catalytic performance of BNNS-anchored PdNi nanoparticles was likely due to the synergy of PdNi and the alteration of electronic and surface properties of Pd by reasonable interactions between bimetallic nanoparticles and BNNS support.

Effect of Surface Pt Doping on the Reactivity of Au(111) Surfaces towards Methanol Dehydrogenation: A First-Principles Density Functional Theory Investigation

The surprisingly high catalytic activity of gold has been known to the heterogeneous catalysis community since the mid-1980s. Significant efforts have been directed towards improving the reactivity of these surfaces towards important industrial reactions. One such strategy is the introduction of small amounts of other metals to create Au-based surface alloys. In this work, we investigated the synergistic effect of the Pt doping of a Au(111) surface on decreasing the activation barrier of the methanol dehydrogenation elementary step within first-principles density functional theory. To this end, we constructed several models of Pt-doped Au(111) surfaces, including a full Pt overlayer and monolayer. The effect of Pt surface doping was then investigated via the computation of the adsorption energies of the various chemical species involved in the catalytic step and the estimation of the activation barriers of methanol dehydrogenation. Both the electronic and strain effects induced by Pt surface doping substantially lowered the activation energy barrier of this important elementary reaction step. Moreover, in the presence of preadsorbed atomic oxygen, Pt surface doping could be used to reduce the activation energy for methanol dehydrogenation to as low as 0.1 eV.

Iridium-Cooperated, Symmetry-Broken Manganese Oxide Nanocatalyst for Water Oxidation.

The water oxidation reaction, the most important reaction for hydrogen production and other sustainable chemistry, is efficiently catalyzed by the Mn4CaO5 cluster in biological photosystem II. However, synthetic Mn-based heterogeneous electrocatalysts exhibit inferior catalytic activity at neutral pH under mild conditions. Symmetry-broken Mn atoms and their cooperative mechanism through efficient oxidative charge accumulation in biological clusters are important lessons but synthesis strategies for heterogeneous electrocatalysts have not been successfully developed. Here, we report a crystallographically distorted Mn-oxide nanocatalyst, in which Ir atoms break the space group symmetry from I41/amd to P1. Tetrahedral Mn(II) in spinel is partially replaced by Ir, surprisingly resulting in an unprecedented crystal structure. We analyzed the distorted crystal structure of manganese oxide using TEM and investigated how the charge accumulation of Mn atoms is facilitated by the presence of a small amount of Ir.

Experimental and kinetic modeling study on ammonia/polyoxymethylene dimethyl ether 2 oxidation in a jet-stirred reactor

The oxidation of ammonia/polyoxymethylene dimethyl ether 2 (NH3/PODE2) was investigated in a jet-stirred reactor with ammonia addition of 10 %, 25 %, and 50 % in mole fraction. Atmospheric experiments were conducted at an equivalence ratio of 1.0, within the temperature range of 500–1100 K. The initial fuel mole fraction and residence time were fixed at 0.5 % and 2 s, respectively. PODE2 and NH3, along with other intermediates and products such as C1-C2 hydrocarbons and permanent gases, were analyzed using gas chromatography and Fourier transform infrared spectroscopy. The experimental results demonstrate that the addition of NH3 has little impact on the consumption of PODE2, primarily influencing the mole fraction of hydrocarbon intermediates. All three blends exhibited negative temperature coefficient (NTC) behaviors. However, NTC behavior was weakened as the NH3 blending ratios increased due to the competition for O2 at low temperatures. A detailed kinetic model for PODE2/NH3 blends was constructed, incorporating updated rate coefficients from the recent literature and analogy methods. The model also considers the interaction between PODE2 and NH3, which was investigated through reaction pathway analysis and sensitivity analysis. Simulated results show that the mole fraction profiles are reasonably predicted by this model at the test conditions. The interaction between PODE2 and NH3 is facilitated by CH3, NH2 radicals, and NO-NO2 cycle. The rapid reversible reaction between NO and NO2 alters the reaction pathway of radicals in the blends. At low temperatures, PODE2 in blend follows the same oxidation pathway as pure PODE2, while NH3 oxidation is affected by the introduction of additional HO2 and H from PODE2. New OH formation pathways involving NH2, NO, and NO2 occur, while the decomposition of H2O2 is inhibited, thereby affecting the oxidation of PODE2 at intermediate temperatures. Additionally, a notable decrease in the intermediates with carbon–carbon double bonds is observed, due to the consumption of CH3 through the reaction NO2 + CH3 = NO + CH3O. This important reaction also promotes the oxidation of CH3 and the NO-NO2 cycle, resulting in an improvement in system reactivity.

New Mechanistic Insights into the Primary Thermolysis Reactions of 1,3,4,6-Tetranitrooctahydroimidazo-[4,5-d]imidazole (BCHMX) from Predictive Local Coupled Cluster Calculations.

Theoretical studies of the decomposition mechanism of energetic materials quite often scrutinize only the primary thermolysis reactions. However, the secondary reactions are crucial, inter alia, for proper building of the combustion models and understanding the autocatalytic processes. In the present study, we applied predictive DLPNO-CCSD(T) calculations to elucidate the kinetics and decomposition mechanism of a novel promising energetic material, 1,3,4,6-tetranitrooctahydroimidazo [4,5-d] imidazole (BCHMX). We identified eight previously unknown BCHMX conformers, both cis and trans in accordance to the spatial position of the H atoms bonded to a carbon bridge. Among them, the relative enthalpies of cis isomers lie in the narrow range ∼10 kJ mol-1 rendering them thermally accessible in the course of decomposition. The radical N-NO2 bond cleavage via one of the novel conformers is the dominant primary decomposition channel of BCHMX with the kinetic parameters Ea = 168.4 kJ mol-1 and log(A, s-1) = 18.5. We also resolved several contradictory assumptions on the mechanism and key intermediates of BCHMX thermolysis. To get a deeper understanding of the decomposition mechanism, we examined a series of unimolecular and bimolecular secondary channels of BCHMX. Among the former reactions, the C-C bond unzipping followed by another radical elimination of a nitro group is the most energetically favorable pathway with an activation barrier ∼113 kJ mol-1. However, contrary to the literature assumptions, the bimolecular H atom abstraction from a pristine BCHMX molecule by a primary nitramine radical product, not the nitro one, followed by another NO2 radical elimination, is the most important bimolecular secondary thermolysis reaction of BCHMX at lower temperatures. The isokinetic temperature of the bimolecular and unimolecular secondary reactions is ∼620 K. Unimolecular reactions might be important in dilute solutions, where bimolecular reactions are suppressed. The secondary reactions considered in the present work might be pertinent in the case of related energetic nitramines (e.g., RDX, HMX, and CL-20).

Silver-impregnated zeolitized tuffs for environmental degradation of ozone

The natural zeolites were ultrasonically treated and impregnated with silver nanoparticles. The surface stabilized silver nanoparticles dispersion was obtained using an effective electrochemical reduction method. The phase and elemental composition, structure of the Ag-impregnated zeolites (clinoptilolite and mordenite) was studied by various methods such as powder X-ray diffraction, X-ray fluorescence analyses and Fourier-transform infrared spectroscopy. The Ag-impregnated clinoptilolite and mordenite natural zeolite materials with 1.20 wt %, 0.97 wt %, 0.83 wt % and 1.18 wt % silver content were established by XRF analysis. As initial materials were used three types clinoptilolite from Beli Plast, Most, Golobradovo (Kardzhali, Bulgaria) deposits and mordenite from Lyaskovets deposit in Eastern Rhodopes, Bulgaria. The catalytic ability of Ag-mordenite and Ag-clinoptilolites was investigated in the ecologically important reaction of ozone decomposition. The Ag-loaded mordenite demonstrates the higher conversion degree of ozone more than 40% in comparison with Ag-clinoptilolite materials at room temperature.

Development and validation of a comprehensive combustion kinetic model for the oxidation of 3-hexene

Alkene with a double bond present in the middle of the molecule is attractive as a representative of the olefinic group present in the long-chain unsaturated methyl esters, which make up biodiesel typically. Also the study of alkenes has long gained importance owing to its potential as a gasoline surrogate and its formation in significant amounts during alkane oxidation. These considerations motivate the study of kinetics of trans-3-hexene. In the current work, 3-hexene mechanism is developed upon the base chemistry of comprehensive NUIG1.3 mechanism. Several important reactions are revisited and are assigned rate constants from the literature, including theoretical studies. The revised kinetic mechanism has been validated at various temperatures, pressures, and equivalence ratios for different experimental configurations. The mechanism shows good agreement with ignition delay time data in the low to high temperature range. The mechanism also predicts the well known lack of negative temperature coefficient (NTC) behaviour in the case of alkenes with the central double bond. With the proposed kinetic model, it is possible to predict intermediate species profiles produced during 3-hexene oxidation satisfactorily. Path flux analysis and sensitivity analysis are performed in order to understand important reaction pathways and their effect on the combustion characteristics.

Symbiosis Mechanism of Associated Bacteria on 2-keto-L-gulonic Acid Production via Mixed Fermentation: A Review

Vitamin C, a water-soluble vitamin with strong reducing power, cannot be synthesized by the human body and participates in a variety of important biochemical reactions. Vitamin C is widely used in the pharmaceutical, food, health care, beverage, cosmetics, and feed industries, with a huge market demand. The classical two-step fermentation method is the mainstream technology for vitamin C production. D-sorbitol is transformed into L-sorbose by Gluconobacter oxydans in the first step of fermentation; then, L-sorbose is transformed into 2-keto-L-gulonic acid (2-KGA) by a coculture system composed of Ketogulonicigenium vulgare and associated bacteria; and finally, 2-KGA is transformed into vitamin C through chemical transformation. The conversion of L-sorbose into 2-KGA in the second fermentation step is performed by K. vulgare. However, considering the slow growth and low 2-KGA production of K. vulgare when cultured alone, it is necessary to add an associated bacteria to stimulate K. vulgare growth and 2-KGA production. Although the mechanism by which the associated bacteria promote K. vulgare growth and 2-KGA production has extensively been studied, this remains a hot topic in related fields. Based on the latest achievements and research, this review summarizes the metabolic characteristics of K. vulgare and associated bacteria and elucidates the mechanism by which the associated bacteria promote the growth and 2-KGA production of K. vulgare.

Characterization of tryptophan oxidation affecting D1 degradation by FtsH in the photosystem II quality control of chloroplasts.

Photosynthesis is one of the most important reactions for sustaining our environment. Photosystem II (PSII) is the initial site of photosynthetic electron transfer by water oxidation. Light in excess, however, causes the simultaneous production of reactive oxygen species (ROS), leading to photo-oxidative damage in PSII. To maintain photosynthetic activity, the PSII reaction center protein D1, which is the primary target of unavoidable photo-oxidative damage, is efficiently degraded by FtsH protease. In PSII subunits, photo-oxidative modifications of several amino acids such as Trp have been indeed documented, whereas the linkage between such modifications and D1 degradation remains elusive. Here, we show that an oxidative post-translational modification of Trp residue at the N-terminal tail of D1 is correlated with D1 degradation by FtsH during high-light stress. We revealed that Arabidopsis mutant lacking FtsH2 had increased levels of oxidative Trp residues in D1, among which an N-terminal Trp-14 was distinctively localized in the stromal side. Further characterization of Trp-14 using chloroplast transformation in Chlamydomonas indicated that substitution of D1 Trp-14 to Phe, mimicking Trp oxidation enhanced FtsH-mediated D1 degradation under high light, although the substitution did not affect protein stability and PSII activity. Molecular dynamics simulation of PSII implies that both Trp-14 oxidation and Phe substitution cause fluctuation of D1 N-terminal tail. Furthermore, Trp-14 to Phe modification appeared to have an additive effect in the interaction between FtsH and PSII core in vivo. Together, our results suggest that the Trp oxidation at its N-terminus of D1 may be one of the key oxidations in the PSII repair, leading to processive degradation by FtsH.

Characterization of tryptophan oxidation affecting D1 degradation by FtsH in the photosystem II quality control of chloroplasts

Photosynthesis is one of the most important reactions for sustaining our environment. Photosystem II (PSII) is the initial site of photosynthetic electron transfer by water oxidation. Light in excess, however, causes the simultaneous production of reactive oxygen species (ROS), leading to photo-oxidative damage in PSII. To maintain photosynthetic activity, the PSII reaction center protein D1, which is the primary target of unavoidable photo-oxidative damage, is efficiently degraded by FtsH protease. In PSII subunits, photo-oxidative modifications of several amino acids such as Trp have been indeed documented, whereas the linkage between such modifications and D1 degradation remains elusive. Here, we show that an oxidative post-translational modification of Trp residue at the N-terminal tail of D1 is correlated with D1 degradation by FtsH during high-light stress. We revealed that Arabidopsis mutant lacking FtsH2 had increased levels of oxidative Trp residues in D1, among which an N-terminal Trp-14 was distinctively localized in the stromal side. Further characterization of Trp-14 using chloroplast transformation in Chlamydomonas indicated that substitution of D1 Trp-14 to Phe, mimicking Trp oxidation enhanced FtsH-mediated D1 degradation under high light, although the substitution did not affect protein stability and PSII activity. Molecular dynamics simulation of PSII implies that both Trp-14 oxidation and Phe substitution cause fluctuation of D1 N-terminal tail. Furthermore, Trp-14 to Phe modification appeared to have an additive effect in the interaction between FtsH and PSII core in vivo. Together, our results suggest that the Trp oxidation at its N-terminus of D1 may be one of the key oxidations in the PSII repair, leading to processive degradation by FtsH.

Wettability Engineering of Solar Methanol Synthesis.

Engineering the wettability of surfaces with hydrophobic organics has myriad applications in heterogeneous catalysis and the large-scale chemical industry; however, the mechanisms behind may surpass the proverbial hydrophobic kinetic benefits. Herein, the well-studied In2O3 methanol synthesis photocatalyst has been used as an archetype platform for a hydrophobic treatment to enhance its performance. With this strategy, the modified samples facilitated the tuning of a wide range of methanol production rates and selectivity, which were optimized at 1436 μmol gcat-1 h-1 and 61%, respectively. Based on in situ DRIFTS and temperature-programmed desorption-mass spectrometry, the surface-decorated alkylsilane coating on In2O3 not only kinetically enhanced the methanol synthesis by repelling the produced polar molecules but also donated surface active H to facilitate the subsequent hydrogenation reaction. Such a wettability design strategy seems to have universal applicability, judged by its success with other CO2 hydrogenation catalysts, including Fe2O3, CeO2, ZrO2, and Co3O4. Based on the discovered kinetic and mechanistic benefits, the enhanced hydrogenation ability enabled by hydrophobic alkyl groups unleashes the potential of the surface organic chemistry modification strategy for other important catalytic hydrogenation reactions.

Identification of sequence determinants for the ABHD14 enzymes

AbstractOver the course of evolution, enzymes have developed remarkable functional diversity in catalyzing important chemical reactions across various organisms, and understanding how new enzyme functions might have evolved remains an important question in modern enzymology. To systematically annotate functions, based on their protein sequences and available biochemical studies, enzymes with similar catalytic mechanisms have been clustered together into an enzyme superfamily. Typically, enzymes within a superfamily have similar overall three‐dimensional structures, conserved catalytic residues, but large variations in substrate recognition sites and residues to accommodate the diverse biochemical reactions that are catalyzed within the superfamily. The serine hydrolases are an excellent example of such an enzyme superfamily. Based on known enzymatic activities and protein sequences, they are split almost equally into the serine proteases and metabolic serine hydrolases. Within the metabolic serine hydrolases, there are two outlying members, ABHD14A and ABHD14B, that have high sequence similarity, but their biological functions remained cryptic till recently. While ABHD14A still lacks any functional annotation to date, we recently showed that ABHD14B functions as a lysine deacetylase in mammals. Given their high sequence similarity, automated databases often wrongly assign ABHD14A and ABHD14B as the same enzyme, and therefore, annotating functions to them in various organisms has been problematic. In this article, we present a bioinformatics study coupled with biochemical experiments, which identifies key sequence determinants for both ABHD14A and ABHD14B, and enable better classification for them. In addition, we map these enzymes on an evolutionary timescale and provide a much‐wanted resource for studying these interesting enzymes in different organisms.

Single atom manganese catalyst boosting selective oxidation of alcohols with activated peroxymonosulfate

Selective oxidations are important reactions in organic synthesis for fine chemical industry and conventional methods are expensive and produce a lot of toxic wastes. Herein, we demonstrate a facile and environmentally benign technique for liquid phase selective oxidation based on graphene-supported Mn single-atom-catalyst (SAMn-G) for efficient peroxymonosulfate (PMS) activation. The active Mn component in the developed SAMn-G catalyst reached single-atomic dispersion on graphene substrate via the coordination of individual Mn atoms with the doped N from the graphene framework. SAMn-G activated PMS via a nonradical-dominated pathway, which could convert aromatic alcohols into aldehydes or ketones at a mild temperature. The SAMn-G catalyst exhibited superior conversion and aldehyde selectivity in alcohol oxidation in comparison with their counterpart catalysts possessing either homogeneous Mn ions or oxide particles. The high activation efficiency of SAMn-G is due to the synergistic effect between Mn atoms and graphene substrate, as well as the dominated reaction pathway from nonradical oxidation, which is more selective than these free radicals to oxidize the alcohols. Concerted experimental evidence indicates that the non-radical oxidation process was highly possible to follow the electron transfer mechanism by PMS/organic adsorption on the surface of the catalyst. This study provides a fundamental understanding of PMS activation mediated by single atom catalyst for organic synthesis and the achieved insights can also help the catalyst design for other liquid phase selective oxidation processes.