Immersion Freezing Mode Research Articles

Microplastic Particles Contain Ice Nucleation Sites That Can Be Inhibited by Atmospheric Aging.

Recent research has shown that microplastics are widespread in the atmosphere. However, we know little about their ability to nucleate ice and their impact on ice formation in clouds. Ice nucleation by microplastics could also limit their long-range transport and global distribution. The present study explores the heterogeneous ice-nucleating ability of seven microplastic samples in immersion freezing mode. Two polypropylene samples and one polyethylene terephthalate sample froze heterogeneously with median freezing temperatures of -20.9, -23.2, and -21.9 °C, respectively. The number of ice nucleation sites per surface area, ns(T), ranged from 10-1 to 104 cm-2 in a temperature interval of -15 to -25 °C, which is comparable to that of volcanic ash and fungal spores. After exposure to ozone or a combination of UV light and ozone, simulating atmospheric aging, the ice nucleation activity decreased in some cases and remained unchanged in others. Our freezing data suggest that microplastics may promote ice formation in cloud droplets. In addition, based on a comparison of our freezing results and previous simulations using a global transport model, ice nucleation by microplastics will impact their long-range transport to faraway locations and global distribution.

On the Role of Starchy Grains in Ice Nucleation Processes.

Little is known about the role of starchy food on climate change processes like ice nucleation. Here, we investigate the ice nucleation efficiency (INE) of eight different starchy food materials, namely, corn (CO), potato (PO), barley (BA), brown rice (BR), white rice (WR), oats (OA), wheat (WH), and sweet potato (SP), in immersion freezing mode under mixed-phase cloud conditions. Notably, among all these food materials, PO and BA exhibit the highest ice nucleation efficiency with ice nucleation temperatures as high as -4.3 °C (T50 ∼ -7.0 ± 0.5 °C) and -6.5 °C (T50 ∼ -7.2 ± 0.2 °C), respectively. We also explore the effect of environmentally relevant physicochemical conditions on ice nucleation efficiency, including different pH, temperature, UV/O3/NOx exposure, and various cocontaminants. The change in shape, size, surface properties, hydrophobicity, and crystallinity of materials accounted for the altered INE. The increase in shape, size, and hydrophobicity of the sample generally reduces the INE, whereas an increase in crystallinity enhances the INE of the sample under our experimental conditions. The results suggest that environmentally relevant concentrations slightly alter INE, indicating their role as catalysts in environmental matrices. The outcome of studies on the ice nucleation properties of these food-containing aerosols might help in the physicochemical understanding of other biomolecule-induced ice nucleation, which is still an underdeveloped research area.

Measurement report: Atmospheric ice nuclei in the Changbai Mountains (2623 m a.s.l.) in northeastern Asia

Abstract. Atmospheric ice nucleation plays an important role in modulating the global hydrological cycle and atmospheric radiation balance. To date, few comprehensive field observations of ice nuclei have been carried out at high-altitude sites, which are close to the height of mixed-phase cloud formation. In this study, we measured the concentration of ice-nucleating particles (INPs) in the immersion freezing mode at the summit of the Changbai Mountains (2623 m above sea level), northeast Asia, in summer 2021. The cumulative number concentration of INPs varied from 1.6 × 10−3 to 78.3 L−1 over the temperature range of −5.5 to −29.0 °C. Proteinaceous-based biological materials accounted for the majority of INPs, with the proportion of biological INPs (bio-INPs) exceeding 67 % across the entire freezing-temperature range, with this proportion even exceeding 90 % above −13.0 °C. At freezing temperatures ranging from −11.0 to −8.0 °C, bio-INPs were found to significantly correlate with wind speed (r = 0.5–0.8, p < 0.05) and Ca2+ (r = 0.6–0.9), and good but not significant correlation was found with isoprene (r = 0.6–0.7) and its oxidation products (isoprene × O3) (r = 0.7), suggesting that biological aerosols may attach to or mix with soil dust and contribute to INPs. During the daytime, bio-INPs showed a positive correlation with the planetary boundary layer (PBL) height at freezing temperatures ranging from −22.0 to −19.5 °C (r > 0.7, p < 0.05), with the valley breezes from southern mountainous regions also influencing the concentration of INPs. Moreover, the long-distance transport of air mass from the Japan Sea and South Korea significantly contributed to the high concentrations of bio-INPs. Our study emphasizes the important role of biological sources of INPs in the high-altitude atmosphere of northeastern Asia and the significant contribution of long-range transport to the INP concentrations in this region.

The Effects of Aminium and Ammonium Cations on the Ice Nucleation Activity of K‐Feldspar

AbstractMineral dust is one of the most abundant types of ice nucleating particles in the atmosphere. During atmospheric transport, mineral dust particles can become coated with inorganic and organic solutes, which can impact their ice nucleation activity. Aminium cations formed from amines are one type of organic solute that can coat mineral dust particles in the atmosphere, but their effects on the ice nucleation activity of mineral dust have not been studied. We investigated the effects of primary, secondary, and tertiary aminium cations with methyl and ethyl groups, as well as ammonium cations, on the ice nucleation activity of K‐feldspar, an important type of mineral dust, in the immersion freezing mode at low cation concentrations (0.2–20 mM) using a droplet‐freezing apparatus. Ammonium cations substantially increased the ice nucleation activity of K‐feldspar, consistent with previous studies. In contrast, primary aminium cations significantly reduced K‐feldspar ice nucleation activity, and secondary and tertiary aminium cations had no significant effect (the effect was less than the uncertainty of our measurements). Our combined results are consistent with the following mechanisms: ammonium cations undergo ion exchange with K‐feldspar, providing exposed N–H groups for hydrogen bonding with ice; primary aminium cations undergo ion exchange with K‐feldspar, exposing a hydrophobic tail that is not effective at nucleating ice; secondary and tertiary aminium cations do not undergo ion exchange with K‐feldspar due to steric effects caused by the multiple hydrophobic groups on the cation.

Heterogeneous Ice Nucleation in Model Crystalline Porous Organic Polymers: Influence of Pore Size on Immersion Freezing.

Heterogeneous ice nucleation activity is affected by aerosol particle composition, crystallinity, pore size, and surface area. However, these surface properties are not well understood, regarding how they act to promote ice nucleation and growth to form ice clouds. Therefore, synthesized materials for which surface properties can be tuned were examined in immersion freezing mode in this study. To establish the relationship between particle surface properties and efficiency of ice nucleation, materials, here, covalent organic frameworks (COFs), with different pore diameters and degrees of crystallinity (ordering), were characterized. Results showed that out of all the highly crystalline COFs, the sample with a pore diameter between 2 and 3 nm exhibited the most efficient ice nucleation activity. We posit that the highly crystalline structures with ordered pores have an optimal pore diameter where the ice nucleation activity is maximized and that the not highly crystalline structures with nonordered pores have more sites for ice nucleation. The results were compared and discussed in the context of other synthesized porous particle systems. Such studies give insight into how material features impact ice nucleation activity.

Long-term variability in immersion-mode marine ice-nucleating particles from climate model simulations and observations

Abstract. Ice-nucleating particles (INPs) in the Southern Ocean (SO) atmosphere have significant impacts on cloud radiative and microphysical properties. Yet, INP prediction skill in climate models remains poorly understood, in part because of the lack of long-term measurements. Here we show, for the first time, how model-simulated INP concentrations compare with year-round INP measurements during the Macquarie Island Cloud Radiation Experiment (MICRE) campaign from 2017–2018. We simulate immersion-mode INP concentrations using the Energy Exascale Earth System Model version 1 (E3SMv1) by combining simulated aerosols with recently developed deterministic INP parameterizations and the native classical nucleation theory (CNT) for mineral dust in E3SMv1. Because MICRE did not collect aerosol measurements of super-micron particles, which are more effective ice nucleators, we evaluate the model's aerosol fields at other high-latitude sites using long-term in situ observations of dust and sea spray aerosol. We find that the model underestimates dust and overestimates sea spray aerosol concentrations by 1 to 2 orders of magnitude for most of the high-latitude sites in the Southern Hemisphere. We next compare predicted INP concentrations with concentrations of INPs collected on filter samples (typically for 2 or 3 d) and processed offline using the Colorado State University ice spectrometer (IS) in immersion freezing mode. We find that when deterministic parameterizations for both dust and sea spray INPs are used, simulated INPs are within a factor of 10 of observed INPs more than 60 % of the time during summer. Our results also indicate that the E3SM's current treatment of mineral dust immersion freezing in the SO is impacted by compensating biases – an underprediction of dust amount was compensated by an overprediction of its effectiveness as INPs. We also perform idealized droplet freezing experiments to quantify the implications of the time-dependent behavior assumed by the E3SM's CNT-parameterization and compare with the ice spectrometer observations. We find that the E3SM CNT 10 s diagnostic used in this study is a reasonable approximation of the exact formulation of CNT, when applied to ice spectrometer measurements in low-INP conditions similar to Macquarie Island. However, the linearized 10 s diagnostic underestimates the exact formula by an order of magnitude or more in places with high-INP conditions like the Sahara. Overall, our findings suggest that it is important to correct the biases in E3SM's simulated dust life cycle and update E3SM's INP parameterizations. INP prediction errors of 2 to 3 orders of magnitude can have considerable impacts on the simulated cloud and radiative properties in global climate models. On comparing INP concentrations during MICRE against ship-based campaigns, Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) and Antarctic Circumnavigation Expedition (ACE), we find that INPs from the latter are significantly higher only in regions closer to Macquarie Island. This alludes to the fact that physical, chemical and biological processes affecting INP concentrations as stimulated by the island could be partly responsible for the high INP concentrations observed at Macquarie Island during the MICRE campaign. Therefore, improvements to both aerosol simulation and INP parameterizations are required to adequately simulate INPs and their cloud impacts in E3SM. It will be helpful to include a parallel measurement of the size-resolved aerosol composition and explore opportunities for long-term measurement platforms in future field campaigns studying INP sources in remote marine regions.

Ice nucleation by smectites: the role of the edges

Abstract. Smectites, like other clay minerals, have been shown to promote ice nucleation in the immersion freezing mode and likely contribute to the population of ice-nucleating particles (INPs) in the atmosphere. Smectites are layered aluminosilicates, which form platelets that depending on composition might swell or even delaminate in water by intercalation of water molecules between their layers. They comprise among others montmorillonites, hectorites, beidellites, and nontronites. In this study, we investigate the ice nucleation (IN) activity of a variety of natural and synthetic smectite samples with different exchangeable cations. The montmorillonites STx-1b and SAz-1, the nontronite SWa-1, and the hectorite SHCa-1 are all rich in Ca2+ as the exchangeable cation; the bentonite MX-80 is rich in Na+ with a minor contribution of Ca2+, and the synthetic Laponite is a pure Na+ smectite. The bentonite SAu-1 is rich in Mg2+ with a minor contribution of Na+, and the synthetic interstratified mica-montmorillonite Barasym carries NH4+ as the exchangeable cation. In emulsion freezing experiments, all samples except Laponite exhibited one or two heterogeneous freezing peaks with onsets between 239 and 248 K and a quite large variation in IN activity yet without clear correlation with the exchangeable cation, with the type of smectite, or with mineralogical impurities in the samples. To further investigate the role of the exchangeable cation, we performed ion exchange experiments. Replacing NH4+ with Ca2+ in Barasym reduced its IN activity to that of other Ca-rich montmorillonites. In contrast, stepwise exchange of the native cations in STx-1b once with Y3+ and once with Cu2+ showed no influence on IN activity. However, aging of smectite suspensions in pure water up to several months revealed a decrease in IN activity with time, which we attribute to the delamination of smectites in aqueous suspensions, which may proceed over long timescales. The dependence of IN activity on platelet stacking and thickness can be explained if the hydroxylated chains forming at the edges are the location of ice nucleation in smectites, since the edges need to be thick enough to host a critical ice embryo. We hypothesize that at least three smectite layers need to be stacked together to host a critical ice embryo on clay mineral edges and that the larger the surface edge area is, the higher the freezing temperature. Comparison with reported platelet thicknesses of the investigated smectite samples suggests that the observed freezing temperatures are indeed limited by the surface area provided by the mostly very thin platelets. Specifically, Laponite, which did not show any IN activity, is known to delaminate into single layers of about 1 nm thickness, which would be too thin to host a critical ice embryo.

Influence of pH on Ice Nucleation by Kaolinite: Experiments and Molecular Simulations.

In mixed-phase or ice clouds, ice can be formed through heterogeneous nucleation. A major type of ice-nucleating particle (INP) in the atmosphere are mineral dust particles. For mixed-phase clouds, the pH of water droplets can vary widely and influence ice nucleation by altering the surface of some INPs, including mineral dust. Kaolinite is a commonly occurring clay mineral, and laboratory experiments, as well as molecular dynamics (MD) simulations, have demonstrated its ice-nucleating efficiency at neutral pH. We examine the influence of pH on the ice-nucleating efficiency of kaolinite, in the immersion freezing mode, through both droplet freezing experiments and MD simulations. Droplet freezing experiments using KGa-1b kaolinite samples are reported under both acidic (HNO3 solutions) and basic (NaOH solutions) conditions, covering the measured pH range 0.18-13.26. These experiments show that the ice-nucleating efficiency of kaolinite is not significantly influenced by the presence of acid but is reduced in extremely basic conditions. We report MD simulations aimed at gaining a microscopic understanding of the pH dependence of ice nucleation by kaolinite. The Al(001), Si(001), and three edge surfaces of kaolinite are considered, but ice nucleation was observed only for the Al(001) surface. The hydroxy groups exposed on the Al(001) surface can be deprotonated in a basic solution or dual-protonated in an acidic solution, which can influence ice nucleation efficiency. The protonation state of the Al(001) surface for a particular pH can be estimated using previously measured pKa values. We find that the monoprotonated Al(001) surface expected to be stable at near-neutral pH is the most effective ice-nucleating surface. In MD simulations, the ice nucleation efficiency persists for dual-protonation but decreases significantly with increasing deprotonation, qualitatively consistent with the experimental observations. Taken together, our experimental and MD results for a wide range of pH values support the suggestion that the Al(001) surface may be important for ice nucleation by kaolinite. Additionally, the deprotonation of hydroxy groups on INP surfaces can have a significant effect on their ice-nucleating ability.

Characteristics of ice-nucleating particles in Beijing during spring: A comparison study of measurements between the suburban and a nearby mountain area

Ice-nucleating particles (INPs) are of great importance for regional weather and climate by altering the microphysical properties of clouds. However, large uncertainties still exist for INP concentrations over the polluted North China Plain (NCP) due to limited INPs observation in this region and the complex physical and chemical properties of aerosols from multiple sources. In this study, the concentrations of INPs active in the immersion freezing mode at temperatures ranging from −5 °C to −30 °C are simultaneously measured for about one month in the Spring season at a mountain site and a suburb site in Beijing representing clean and anthropogenic condition, respectively. Different concentrations and characteristics of INPs are found between the two sites, which reflect the influence of different air masses and INP sources. Consistent with previous studies in this region, dust particles are found to be the most efficient INPs during the Spring season, and the contribution of anthropogenic pollution aerosols was not obvious. Most interestingly, the INP concentration at the mountain site was about one magnitude higher than at the suburban site at temperatures warmer than −10 °C, which is caused by primary biological aerosol originating from the forest in the mountainous area. Our results underline the important role of these biological aerosols, which are also expected to have a strong impact on the glaciation of orographic clouds.

Electron microscopy and calorimetry of proteins in supercooled water

Some of the best nucleating agents in nature are ice-nucleating proteins, which boost ice growth better than any other material. They can induce immersion freezing of supercooled water only a few degrees below 0 °C. An open question is whether this ability also extends to the deposition mode, i.e., to water vapor. In this work, we used three proteins, apoferritin, InaZ (ice nucleation active protein Z), and myoglobin, of which the first two are classified as ice-nucleating proteins for the immersion freezing mode. We studied the ice nucleation ability of these proteins by differential scanning calorimetry (immersion freezing) and by environmental scanning electron microscopy (deposition freezing). Our data show that InaZ crystallizes water directly from the vapor phase, while apoferritin first condenses water in the supercooled state, and subsequently crystallizes it, just as myoglobin, which is unable to nucleate ice.

Effects of heterogeneous reaction with NO2 on ice nucleation activities of feldspar and Arizona Test Dust

Mineral dust is an important type of ice nucleating particles in the troposphere; however, the effects of heterogeneous reactions on ice nucleation (IN) activities of mineral dust remain to be elucidated. A droplet-freezing apparatus (Guangzhou Institute of Geochemistry Ice Nucleation Apparatus, GIGINA) was developed in this work to measure IN activities of atmospheric particles in the immersion freezing mode, and its performance was validated by a series of experimental characterizations. This apparatus was then employed to measure IN activities of feldspar and Arizona Test Dust (ATD) particles before and after heterogeneous reaction with NO2 (10±0.5 ppmv) at 40% relative humidity. The surface coverage of nitrate, θ(NO3−), increased to 3.1±0.2 for feldspar after reaction with NO2 for 6 hr, and meanwhile the active site density per unit surface area (ns) at -20°C was reduced from 92±5 to <1.0 cm−2 by about two orders of magnitude; however, no changes in nitrate content or IN activities were observed for further increase in reaction time (up to 24 hr). Both nitrate content and IN activities changed continuously with reaction time (up to 24 hr) for ATD particles; after reaction with NO2 for 24 hr, θ(NO3−) increased to 1.4±0.1 and ns at -20°C was reduced from 20±4 to 9.7±1.9 cm−2 by a factor of ∼2. Our work suggests that heterogeneous reaction with NO2, an abundant reactive nitrogen species in the troposphere, may significantly reduce IN activities of mineral dust in the immersion freezing mode.

Particle emissions from a modern heavy-duty diesel engine as ice nuclei in immersion freezing mode: a laboratory study on fossil and renewable fuels

Abstract. We studied ice-nucleating abilities of particulate emissions from a modern heavy-duty diesel engine using three different types of fuel. The polydisperse particle emissions were sampled during engine operation and introduced to a continuous-flow diffusion chamber (CFDC) instrument at a constant relative humidity RHwater=110 %, while the temperature was ramped between −43 and −32 ∘C (T scan). The tested fuels were EN 590 compliant low-sulfur fossil diesel, hydrotreated vegetable oil (HVO), and rapeseed methyl ester (RME); all were tested without blending. Sampling was carried out at different stages in the engine exhaust aftertreatment system, with and without simulated atmospheric processing using an oxidation flow reactor. In addition to ice nucleation experiments, we used supportive instrumentation to characterize the emitted particles for their physicochemical properties and presented six parameters. We found that the studied emissions contained no significant concentrations of ice-nucleating particles likely to be of atmospheric relevance. The substitution of fossil diesel with renewable fuels, using different emission aftertreatment systems such as a diesel oxidation catalyst, and photochemical aging of total exhaust had only minor effect on their ice-nucleating abilities.

Inter-annual variability of ice nucleating particles in Mexico city

The continuous and sustained population shift from rural to urban areas is driving most of the fast-growing megacities on a global scale. Considerable pollution, gases and particulate matter, is emitted yearly into the atmosphere of megacities, with unclear impacts on the local and regional hydrological cycle. The present work evaluated the inter-annual variability of super-micron (1.0–10 μm) ice nucleating particles (INP), via immersion freezing, sampled during the dry-warm season in Mexico City on two consecutive years using the UNAM-MicroOrifice Uniform Deposit Impactor-Droplet Freezing Technique (UNAM-MOUDI-DFT). The aerosol particles emitted in Mexico City were found to act as INP via the immersion freezing mode at temperatures below −20 °C with INP concentrations ranging between 0.74 L-1 (−20 °C) and 20.42 L-1 (−30 °C). Although the INP concentration varied between the dry-warm seasons, the average concentrations between 2018 and 2019 were rather similar, with significant differences only observed at −20 °C. The large increase (>200%) in fine particulate matter -PM2.5- observed during the 2019 severe air pollution episode caused by biomass burning (BB) emissions, did not impact the super-micron INP concentrations between −20 °C and −30 °C. However, INPs at temperatures above −15 °C were found to increase during the severe pollution episode. Given that such warm ice nucleation temperatures can be linked with the presence of biological particles, the present observations suggest that the BB plumes transported into Mexico City were most likely advecting co-emitted biological particles.

Laboratory and field studies of ice-nucleating particles from open-lot livestock facilities in Texas

Abstract. In this work, an abundance of ice-nucleating particles (INPs) from livestock facilities was studied through laboratory measurements from cloud-simulation chamber experiments and field investigation in the Texas Panhandle. Surface materials from two livestock facilities, one in the Texas Panhandle and another from McGregor, Texas, were selected as dust proxies for laboratory analyses. These two samples possessed different chemical and biological properties. A combination of aerosol interaction and dynamics in the atmosphere (AIDA) measurements and offline ice spectrometry was used to assess the immersion freezing mode ice nucleation ability and efficiency of these proxy samples at temperatures above −29 ∘C. A dynamic filter processing chamber was also used to complement the freezing efficiencies of submicron and supermicron particles collected from the AIDA chamber. For the field survey, periodic ambient particle sampling took place at four commercial livestock facilities from July 2017 to July 2019. INP concentrations of collected particles were measured using an offline freezing test system, and the data were acquired for temperatures between −5 and −25 ∘C. Our AIDA laboratory results showed that the freezing spectra of two livestock dust proxies exhibited higher freezing efficiency than previously studied soil dust samples at temperatures below −25 ∘C. Despite their differences in composition, the freezing efficiencies of both proxy livestock dust samples were comparable to each other. Our dynamic filter processing chamber results showed on average approximately 50 % supermicron size dominance in the INPs of both dust proxies. Thus, our laboratory findings suggest the importance of particle size in immersion freezing for these samples and that the size might be a more important factor for immersion freezing of livestock dust than the composition. From a 3-year field survey, we measured a high concentration of ambient INPs of 1171.6 ± 691.6 L−1 (average ± standard error) at −25 ∘C for aerosol particles collected at the downwind edges of livestock facilities. An obvious seasonal variation in INP concentration, peaking in summer, was observed, with the maximum at the same temperature exceeding 10 000 L−1 on 23 July 2018. The observed high INP concentrations suggest that a livestock facility is a substantial source of INPs. The INP concentration values from our field survey showed a strong correlation with measured particulate matter mass concentration, which supports the importance of size in ice nucleation of particles from livestock facilities.

The Influence of Chemical and Mineral Compositions on the Parameterization of Immersion Freezing by Volcanic Ash Particles

AbstractVolcanic ash (VA) from explosive eruptions contributes to aerosol loadings in the atmosphere. Aside from the negative impact of VA on air quality and aviation, these particles can alter the optical and microphysical properties of clouds by triggering ice formation, thereby influencing precipitation and climate. Depending on the volcano and eruption style, VA displays a wide range of different physical, chemical, and mineralogical properties. Here, we present a unique data set on the ice nucleation activity of 15 VA samples obtained from different volcanoes worldwide. The ice nucleation activities of these samples were studied in the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) cloud simulation chamber as well as with the Ice Nucleation Spectrometer of the Karlsruhe Institute of Technology (INSEKT). All VA particles nucleated ice in the immersion freezing mode from 263 to 238K with ice nucleation active site (INAS) densities ranging from ∼105 to 1011 m−2, respectively. The variabilities observed among the VA samples, at any given temperature, range over 3.5 orders of magnitude. The ice‐nucleating abilities of VA samples correlate to varying degrees with their bulk pyroxene and plagioclase contents as a function of temperature. We combined our new data set with existing literature data to develop an improved ice nucleation parameterization for natural VA in the immersion freezing mode. This should be useful for modeling the impact of VA on clouds.

Development of the drop Freezing Ice Nuclei Counter (FINC), intercomparison of droplet freezing techniques, and use of soluble lignin as an atmospheric ice nucleation standard

Abstract. Aerosol–cloud interactions, including the ice nucleation of supercooled liquid water droplets caused by ice-nucleating particles (INPs) and macromolecules (INMs), are a source of uncertainty in predicting future climate. Because INPs and INMs have spatial and temporal heterogeneity in source, number, and composition, predicting their concentration and distribution is a challenge requiring apt analytical instrumentation. Here, we present the development of our drop Freezing Ice Nuclei Counter (FINC) for the estimation of INP and INM concentrations in the immersion freezing mode. FINC's design builds upon previous droplet freezing techniques (DFTs) and uses an ethanol bath to cool sample aliquots while detecting freezing using a camera. Specifically, FINC uses 288 sample wells of 5–60 µL volume, has a limit of detection of −25.4 ± 0.2 ∘C with 5 µL, and has an instrument temperature uncertainty of ± 0.5 ∘C. We further conducted freezing control experiments to quantify the nonhomogeneous behavior of our developed DFT, including the consideration of eight different sources of contamination. As part of the validation of FINC, an intercomparison campaign was conducted using an NX-illite suspension and an ambient aerosol sample from two other drop freezing instruments: ETH's DRoplet Ice Nuclei Counter Zurich (DRINCZ) and the University of Basel's LED-based Ice Nucleation Detection Apparatus (LINDA). We also tabulated an exhaustive list of peer-reviewed DFTs, to which we added our characterized and validated FINC. In addition, we propose herein the use of a water-soluble biopolymer, lignin, as a suitable ice-nucleating standard. An ideal INM standard should be inexpensive, accessible, reproducible, unaffected by sample preparation, and consistent across techniques. First, we compared lignin's freezing temperature across different drop freezing instruments, including on DRINCZ and LINDA, and then determined an empirical fit parameter for future drop freezing validations. Subsequently, we showed that commercial lignin has consistent ice-nucleating activity across product batches and demonstrated that the ice-nucleating ability of aqueous lignin solutions is stable over time. With these findings, we present lignin as a good immersion freezing standard for future DFT intercomparisons in the research field of atmospheric ice nucleation.

Active sites for ice nucleation differ depending on nucleation mode

The nucleation of ice crystals in clouds is poorly understood, despite being of critical importance for our planet's climate. Nucleation occurs largely at rare "active sites" present on airborne particles such as mineral dust, but the nucleation pathway is distinct under different meteorological conditions. These give rise to two key nucleation pathways where a particle is either immersed in a supercooled liquid water droplet (immersion freezing mode) or suspended in a supersaturated vapor (deposition mode). However, it is unclear if the same active sites are responsible for nucleation in these two modes. Here, we directly compare the sites that are active in these two modes by performing immersion freezing and deposition experiments on the same thin sections of two atmospherically important minerals (feldspar and quartz). For both substrates, we confirm that nucleation is dominated by a limited number of sites and show that there is little correlation between the two sets of sites operating in each experimental method: across both materials, only six out of 73 sites active for immersion freezing nucleation were also active for deposition nucleation. Clearly, different properties determine the activity of nucleation sites for each mode, and we use the pore condensation and freezing concept to argue that effective deposition sites have size and/or geometry requirements not of relevance to effective immersion freezing sites. Hence, the ability to nucleate is pathway dependent, and the mode of nucleation has to be explicitly considered when applying experimental data in cloud models.

Lignin's ability to nucleate ice via immersion freezing and its stability towards physicochemical treatments and atmospheric processing

Abstract. Aerosol–cloud interactions dominate the uncertainties in current predictions of the atmosphere's radiative balance. Specifically, the ice phase remains difficult to predict in mixed-phase clouds, where liquid water and ice co-exist. The formation of ice in these clouds originates from heterogeneous ice nucleation processes, of which immersion freezing is a dominant pathway. Among atmospheric surfaces capable of forming a template for ice, mineral dust, biological material and more recently organic matter are known to initiate freezing. To further our understanding of the role of organic matter in ice nucleation, we chose to investigate the ice nucleation (IN) ability of a specific subcomponent of atmospheric organic matter, the biopolymer lignin. Ice nucleation experiments were conducted in our custom-built freezing ice nuclei counter (FINC) to measure freezing temperatures in the immersion freezing mode. We find that lignin acts as an ice-active macromolecule at temperatures relevant for mixed-phase cloud processes (e.g. 50 % activated fraction up to −18.8 ∘C at 200 mg C L−1). Within a dilution series of lignin solutions, we observed a non-linear effect in freezing temperatures; the number of IN sites per milligram of carbon increased with decreasing lignin concentration. We attribute this change to a concentration-dependant aggregation of lignin in solution. We further investigated the effect of physicochemical treatments on lignin's IN activity, including experiments with sonication, heating and reaction with hydrogen peroxide. Only harsh conditions such as heating to 260 ∘C and addition of a mixture with a ratio of 1 : 750 of grams of lignin to millilitres of hydrogen peroxide were able to decrease lignin's IN activity to the instrument's background level. Next, photochemical and ozone bubbling experiments were conducted to test the effect of atmospheric processing on lignin's IN activity. We showed that this activity was not susceptible to changes under atmospherically relevant conditions, despite chemical changes observed by UV–Vis absorbance. Our results present lignin as a recalcitrant IN-active subcomponent of organic matter within, for example, biomass burning aerosols and brown carbon. They further contribute to the understanding of how soluble organic material in the atmosphere can nucleate ice.

Atmospheric ice nuclei concentration measurements over a high altitude-station in the Western Ghats, India

Abstract Mixed-phase and ice clouds play a significant role in modulating the Indian summer monsoon rainfall, and modeling studies suggest that inaccurate representation of ice nucleating particles (INP) is one of the factors, which have resulted in a deficiency in the prediction of cloud properties and hydrological cycle. We do not understand the ice nucleation mechanisms to represent the ice formation in the model, and therefore more INP measurements at various supercooled temperatures are needed. This study reports for the first time real-time INP concentration at a high altitude station in the Western Ghats region of India, and these results will be used to constrain the ice nucleation parameterizations in the model. The variation of INP for any particular cloud condition can have strong microphysical responses of mixed-phase precipitation formation processes. Also, to improve the representation of heterogeneous ice nucleation, INP measurements of various types of aerosols commonly observed over the Indian region are needed. This study presents, the INP concentrations and daily concentration of non-refractory chemical composition (organics, sulfate, nitrate, ammonium, and chloride), cloud condensation nuclei (CCN), and aerosol size distribution. Spectrometer for Ice Nuclei (SPIN) was operated to measure INP concentration at the mountain site from August to December 2018. INP measurements were performed at three different temperatures (−25, −30, and − 34 °C) in the immersion freezing mode relevant for mixed-phase cloud conditions. The average INP concentrations approximately varied from 0.18 to 12.4 L−1, 0.39 to 24 L−1, 1.1 to 40.2 L−1 at −25, −30, and − 34 °C, respectively. These concentrations are within the concentrations reported in the literature from different regions across the globe. The air mass back trajectory analysis showed that continental air mass contains more INP compared to maritime air mass. The information on INP concentration and chemical characteristics of aerosol will help to improve heterogeneous ice nucleation parameterization in numerical models.

Ice-nucleating particles in a coastal tropical site

Abstract. Atmospheric aerosol particles that can nucleate ice are referred to as ice-nucleating particles (INPs). Recent studies have confirmed that aerosol particles emitted by the oceans can act as INPs. This very relevant information can be included in climate and weather models to predict the formation of ice in clouds, given that most of them do not consider oceans as a source of INPs. Very few studies that sample INPs have been carried out in tropical latitudes, and there is a need to evaluate their availability to understand the potential role that marine aerosol may play in the hydrological cycle of tropical regions. This study presents results from the first measurements obtained during a field campaign conducted in the tropical village of Sisal, located on the coast of the Gulf of Mexico of the Yucatan Peninsula in Mexico in January–February 2017, and one of the few data sets currently available at such latitudes (i.e., 21∘ N). Aerosol particles sampled in Sisal are shown to be very efficient INPs in the immersion freezing mode, with onset freezing temperatures in some cases as high as −3 ∘C, similarly to the onset temperature from Pseudomonas syringae. The results show that the INP concentration in Sisal was higher than at other locations sampled with the same type of INP counter. Air masses arriving in Sisal after the passage of cold fronts have surprisingly higher INP concentrations than the campaign average, despite their lower total aerosol concentration. The high concentrations of INPs at warmer ice nucleation temperatures (T&gt;-15 ∘C) and the supermicron size of the INPs suggest that biological particles may have been a significant contributor to the INP population in Sisal during this study. However, our observations also suggest that at temperatures ranging between −20 and −30 ∘C mineral dust particles are the likely source of the measured INPs.