Immediate Release Tablets Research Articles

Tablets containing açaí (Euterpe spp.) dried extract for dietary supplementation: A study of functional properties

Açaí is a very popular functional food in the Amazon due to its nutritional properties, its high caloric value, and its high content of anthocyanins and phenolic compounds, which mainly confers antioxidant and anti-inflammatory activities. Thus, this study aimed at the development of immediate-release tablets containing açaí dried extract by direct compression. The extract was subjected to physical evaluation of the powder, quantification of total polyphenol (TP) content (mg EAG/g), total anthocyanin content (mg C3G/100 g), cyanidin-3-rutinoside marker (µg C3R/g) by LC-MS, obtention of the tablet, and their physical-mechanical evaluation. Açaí dried extract showed spherical shape particles, with smooth and rough surfaces and heterogeneous sizes, which are characteristic of dried powders when obtained by spray drying. In addition, the extract presented TP content (23.307± 2.190 mg EAG/g), total anthocyanins (10.52 mg C3G/100 g), and cyanidin-3-rutinoside (42 µg C3R/g). Tablets had good mechanical properties, good thermal stability under 200°C, and 3.65 µg C3R/g of cyanidin-3-rutinoside content per tablet unit. The results obtained in this study showed the possibility of obtaining tablets containing açaí dried extract with good mechanical properties and antioxidant activity aiming its use as a dietary supplement.

Lacosamide extended-release capsules are bioequivalent to lacosamide immediate-release tablets: Pharmacokinetic observations and simulations

ObjectivesAssess the bioequivalence of lacosamide extended-release (XR) capsules and immediate-release (IR) tablets and answer real-world clinical questions regarding the use of lacosamide XR. MethodsAn open-label, randomized, two-treatment, two-sequence, oral comparative bioavailability study was conducted to assess the bioequivalence of two lacosamide formulations. Participants were randomized 1:1 to receive lacosamide XR capsules (400 mg once-daily) or IR tablets (200 mg twice-daily) in 1 of 2 sequences over 7-day periods. Primary outcome was the area under the lacosamide concentration-time curve over 24 h at steady-state (AUC0-τ,ss). Secondary outcomes were maximum (Cmax,ss) and minimum concentrations at steady-state (Cmin,ss). Bioequivalence was established when 90% confidence intervals (CIs) for geometric least square means ratios (GLSMs) were between 80% and 125%. Adverse events (AEs) and other safety outcomes were also assessed. Pharmacokinetic simulations, including adherent and partially adherent dosing scenarios with XR and IR formulations, modeled the clinical use of lacosamide XR. ResultsThirty-five healthy adult males were enrolled in the bioequivalence study. After 7 days of study drug, mean AUC0-τ,ss, Cmax,ss, and Cmin,ss values were similar between XR and IR formulations; all 90% CIs for GLSMs were between 80% and 125%. AEs were mild and no serious AEs or other clinically significant safety findings were observed. Pharmacokinetic simulations suggested that partial adherence affected formulations similarly; and the best strategy for switching formulations was to take the morning lacosamide IR dose followed by the evening lacosamide XR dose, as this resulted in the most consistent lacosamide plasma concentrations. ConclusionsOnce-daily lacosamide XR capsules were bioequivalent to twice-daily lacosamide IR tablets. Pharmacokinetic simulations indicated lacosamide XR and IR formulations were similarly affected by partial adherence, though once-daily dosing with lacosamide XR may offer clinical advantages, and formulations can be easily switched. These results support the use of lacosamide XR capsules as a once-daily alternative to lacosamide IR tablets.

Formulation and characterization of glipizide solid dosage form with enhanced solubility.

Glipizide, a poor water-soluble drug belongs to BCS class II. The proposed work aimed to enhance the solubility of glipizide by preparing solid dispersions, using polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG). Solvent evaporation method was used for the preparation of glipizide solid dispersions. Solid dispersions were prepared in four different drug-to-polymer ratios i.e. 1:1, 1:2, 1:3 and 1:4. Mainly effect of three polymers (PVP K30, PVP K90 and PEG 6000) was evaluated on the solubility and dissolution of glipizide. The in-vitro dissolution of all prepared formulations was performed under pH 6.8 at 37°C using USP type II apparatus. In-vitro dissolution results revealed that the formulations having high concentrations of the polymer showed enhanced solubility. Enhancements in the solubility and rate of dissolution of the drug were noted in solid dispersion formulations compared to the physical blends and pure drug. Solid dispersions containing polyvinyl pyrrolidone exhibited a more favorable pattern of drug release compared to the corresponding solid dispersions with PEG. An increase in the maximum solubility of the drug within the solid dispersion systems was observed in all instances. Two solid dispersion formulations were optimized and formulated into immediate-release tablets, which passed all the pharmacopoeial and non-pharmacopoeial tests. Fourier transformed Infrared (FTIR) spectroscopy X-ray diffraction (XRD) and Differential scanning calorimetry (DSC) were used to indicate drug: polymer interactions in solid state. Analysis of the solid dispersion samples through characterization tests indicated the compatibility between the drug and the polymer.

Dose-dependent effect of lamotrigine on quetiapine serum concentration in patients using instant release tablets

PurposeLamotrigine was previously reported to reduce serum concentration of quetiapine. The aim of this study was to investigate whether lamotrigine dose or quetiapine formulation was of importance for the drug interaction.MethodsPatients combining lamotrigine with quetiapine (cases) were included retrospectively from a routine therapeutic drug monitoring (TDM) service, as were a control group of patients using quetiapine without any interacting drugs. The case and control groups were divided into groups using immediate release (IR) and extended release (XR) quetiapine. The case group was further split into high-dose (> 200 mg/day) and low-dose (≤ 200 mg/day) lamotrigine users. Quetiapine concentration-to-dose (C/D) ratio and metabolite-to-parent ratio (MPR) were compared between the control group and dose-separated case groups using ANOVA test and t-tests.ResultsIn total, 406 patients were included. The mean C/D ratio of IR quetiapine was 46% lower in the high-dose lamotrigine group compared with the control group (P < 0.001), while no interaction effect was present in the low dose lamotrigine group (P = 0.7). Regardless of lamotrigine dose, there was no difference in quetiapine C/D ratio for patients using the XR formulation (P = 0.4). The quetiapine MPR was unaffected regardless of formulation and lamotrigine dose (P ≥ 0.06).ConclusionThe effect of lamotrigine in reducing quetiapine concentration is only significant for patients using quetiapine IR tablets who are treated with lamotrigine doses > 200 mg/day. Because of high variability in the interaction effect, TDM of quetiapine should be recommended during co-prescription of high-dose lamotrigine.

In vitro release and bioaccessibility of oral solid preparations in a dynamic gastrointestinal system simulating fasted and fed states: A case study of metformin hydrochloride tablets

Food and formulation characteristics are crucial factors affecting the gastrointestinal release and absorption kinetics of oral solid preparations. In the present study, the dynamic continuous release and bioaccessibility of metformin hydrochloride immediate-release (IR) and sustained-release (SR) tablets were investigated in the dynamic human stomach-intestine (DHSI-IV) system simulating fasted and fed states in healthy adults. Both tablet formulations (particularly IR tablet) exhibited a postponed release in the fed state compared to the fasted state. Correspondingly, the bioaccessible fraction of metformin from IR tablets in the presence of high-fat meal was significantly reduced to 76.2 % of the fasted state. However, the in vitro bioaccessibility was less impaired by food for SR tablets with a fed/fasted ratio of 95.5 %. A convolution-based approach was used to convert in vitro bioaccessibility results to plasma concentration data. The predicted plasma concentration curve showed good agreement with human data in terms of pharmacokinetic (PK) parameters. In the fasted state, the predicted Cmax, Tmax and AUC0-24h of IR tablets were 943.9 ± 25.7 ng/mL, 2.0 ± 0.4 h and 7090.7 ± 112.0 ng.h/mL, respectively, mirroring values observed in healthy subjects. Overall, the DHSI-IV system has demonstrated potential to assess and predict the impact of meal intake on the in vivo release and absorption behaviors of oral solid preparations.

Biogenic Waste from Two Varieties of Plantain in Ghana Contain Pectin with Potential Binding Properties in Conventional Tablets.

Pharmaceutical formulations have traditionally relied on plants and their derivatives for various APIs and excipients. In Ghana, the widespread utilization of plantains, irrespective of their ripeness, generates significant waste at every stage of processing, posing disposal issues. Fascinatingly, these wastes, often discarded, possess significant economic potential and can be recycled into valuable raw materials or products. Pectin, a polysaccharide that occurs naturally, has seen a surge in interest in recent times. It has found widespread use in the pharmaceutical sector, particularly as a binding agent in tablet formulations. This study aimed to evaluate pectin from two popular plantain varieties, Apem (M) and Apantu (T) at different ripening stages, for pharmaceutical use as a binding agent in immediate-release tablets. The ripening stages selected were the matured-green (G), half-ripe (H), and full-ripe (R). Acid (D) and alkaline (L) mediums of extraction were employed for each ripening stage for both varieties. Wet granulation method was used to prepare the granules using paracetamol as a model drug, and their flow properties were subsequently assessed. Postcompression tests including, hardness, friability, weight uniformity, disintegration, assay, and in vitro dissolution were also assessed. Granules from all formulation batches had good flow properties indicated by their angle of repose (14.93 ± 1.41-21.80 ± 1.41), Hausner ratio (0.96 ± 0.27-1.22 ± 0.02), and compressibility (%) (7.69 ± 0.002-20.51 ± 0.002). All the tablets passed the uniformity of weight with none deviating by ±5%. The hardness of all the formulated tablets ranged between 3.96 ± 0.32 and 13.21 ± 0.36, while the friability for all tablets was below 1%. The drug content was between 100.1 ± 0.23% and 103.4 ± 0.01%. Tablets formulated with pectin as a binding agent at concentrations of 10% w/v and 15% w/v successfully met the disintegration test criteria for immediate release tablets. However, those prepared with a concentration of 20% w/v (MGL, MHD, MHL, MRD, MRL, TGL, THD, THL, and TRL) did not pass the disintegration test. Consequently, all batches of tablets successfully met the dissolution test requirement (Diss, Q > 75%), except for the batches that did not pass the disintegration test (Diss, Q < 75%). Ultimately, pectins extracted from the peels of Apem and Apantu at different ripening stages using acid and alkaline extraction can be commercially exploited as pharmaceutical binders at varying concentrations in immediate-release tablets.

Clinical Pharmacology of Pemafibrate Extended-release Formulation in Patients with Hypertriglyceridemia-A Phase 2, Multicenter, Active-controlled, Randomized, Single-blind, Crossover study.

Efficacy, safety, and pharmacokinetics of the selective PPARα modulator pemafibrate as once-daily extended-release (XR) tablets were compared with those of twice-daily immediate-release (IR) tablets in patients with hypertriglyceridemia. A multicenter, randomized, single-blind, active-controlled crossover, phase 2 clinical pharmacology study was performed in patients with hypertriglyceridemia. Patients were randomly assigned to IR 0.2 mg/day, XR 0.4 mg/day, or XR 0.8 mg/day before/after meals (fasted/fed) and treated for a total of eight weeks. The primary endpoint was percentage change in fasting serum triglycerides (TG). Of 63 randomized patients, 60 received the study drug. Patients were 78.3% male, mean age (±SD) 57.5±9.8 years, BMI 25.5±3.7 kg/m2, and fasting TG 221.3±68.1 mg/dL. Fasting serum TG decreased significantly from baseline in all groups (LS mean [95% CI];-43.6 [-47.7, -39.5] % for IR 0.2 mg/day, -41.1 [-45.1, -37.0] % for XR 0.4mg/day, -39.7 [-43.8, -35.6] % for XR 0.8 mg/day), indicating that XR 0.4 and XR 0.8 mg/day were not inferior to IR 0.2 mg/day. TG-lowering effects tended to be stronger for fed than fasted administration. MRTss, tmax, and t1/2 were longer for XR than for IR. Adverse events showed no major inter-group differences: 12.5% (5/40 patients) for IR 0.2, 17.5% (7/40) for XR 0.4, and 20.0% (8/40) for XR 0.8 mg/day. In patients with hypertriglyceridemia, XR substantially lowered TG at all doses, with maximum effectiveness at 0.4 mg/day, the dose approved in Japan, to a level comparable to IR 0.2 mg/day. There were no safety concerns up to 0.8 mg/day.

Efficacy and Safety of Pemafibrate Extended-Release Tablet: a Phase 3, Multicenter, Randomized, Double-Blind, Active-Controlled, Parallel-Group Comparison Trial.

Pemafibrate, a selective peroxisome proliferator-activated receptor α modulator that lowers serum triglyceride levels and increases high-density lipoprotein cholesterol levels, is approved for treating dyslipidemia as twice-daily immediate-release (IR) tablets. A once-daily extended-release (XR) tablet has also been developed. We aimed to confirm the non-inferiority of XR (0.2 or 0.4 mg/day; once daily) to IR (0.2 mg/day; twice daily) in lowering triglyceride levels in patients with hypertriglyceridemia. This phase 3, multicenter, randomized, double-blind study included patients with fasting triglycerides ≥ 200 mg/dL who received IR (0.2 mg/day) or XR (0.2 or 0.4 mg/day). The primary efficacy endpoint was the percentage change in fasting triglyceride levels from baseline to 4, 8, and 12 weeks. Common treatment effects at weeks 4 through 12 were compared between groups using repeated analysis of covariance. In 356 randomized patients, fasting triglyceride levels decreased by 48.0%, 43.8%, and 48.0% with IR 0.2, XR 0.2, and XR 0.4 mg/day, respectively, confirming the non-inferiority of both XR regimens to IR. The proportion of patients who achieved fasting triglycerides ＜150 mg/dL was 45.7%, 37.4%, and 51.7%, while the percentage change of triglycerides in the subgroup with baseline triglycerides ≥ 500 mg/dL was -59.3%, -52.2%, and -66.3% with IR 0.2, XR 0.2, and XR 0.4 mg/day, respectively. XR (0.2 and 0.4 mg/day) was non-inferior to IR (0.2 mg/day). XR 0.4 mg/day demonstrated a more potent triglyceride-lowering effect than XR 0.2 mg/day and should be considered for patients with high triglyceride levels.

Optimization of wet granulation process for manufacturing Rivaroxban generic immediate-release tablets using PBPK modeling and simulations.

The online version contains supplementary material available at 10.1007/s40203-024-00249-6.

Formulation and Evaluation of Immediate-Release Tablet Containing Atorvastatin Phospholipid Solid Dispersion

Formulation and Evaluation of Immediate-Release Tablet Containing Atorvastatin Phospholipid Solid Dispersion

Population pharmacokinetic modeling of levodropropizine: extended application to comparative analysis between commercial formulations and exploration of pharmacokinetic effects of diet.

Levodropropizine, a nonopioid antitussive agent, is being increasingly used in clinical practice with the development of several formulations for symptomatic relief of acute and chronic bronchitis. However, scientific and quantitative population pharmacokinetic analyses of levodropropizine are lacking. Moreover, no integrated quantitative comparison has been performed between formulations. This study quantitatively evaluated and predicted pharmacokinetic properties of formulations through population pharmacokinetic model-based comparisons of commercially available formulations. Plasma concentration profile results from bioequivalence studies of 60-mg immediate release (IR) levodropropizine tablets in 40 healthy Korean males were used as population pharmacokinetic modeling data. For interindividual variability in levodropropizine pharmacokinetics, body surface area was identified as an effective covariate that was positively correlated with peripheral compartment distribution volume. Population pharmacokinetic model for IR tablets well-described the levodropropizine syrup and capsule datasets, suggesting no significant differences in pharmacokinetics among IR tablets, syrups, and capsules of levodropropizine. In contrast, pharmacokinetic profiles differed between 90-mg controlled release (CR) and IR levodropropizine tablets; however, separate parameter estimation was possible by applying the same model structure. In terms of pharmacokinetics, twice-daily regimen of 90-mg CR tablets was equivalent to thrice-daily regimen of 60-mg IR tablets. However, at steady-state, interindividual plasma concentration variability within population was reduced by approximately 36.71-83.18%. For levodropropizine CR tablets, a high-fat diet significantly delayed gastrointestinal absorption but maintained overall plasma exposure equivalent. This study provides useful quantitative judgment data for precision medicine of levodropropizine and can be helpful in predicting the pharmacokinetics of levodropropizine based on commercialized formulation switching.

Initial development of web application to support excipient selection for immediate release tablets using message passing neural network

The formulation of immediate release tablets is a challenging task due to the need to balance multiple factors such as bioavailability and stability. The selection of appropriate excipients is critical in achieving these objectives. The recent successful application of Artificial Intelligence (AI) and Message Passing Neural Network (MPNN) in predicting physicochemical and biological properties of drug molecules suggests for the researchers on the ability to apply these models in selecting excipients. The aim of this study is to develop an innovative approach for selecting excipients using AI and MPNN and to create a user-friendly web application to support excipient selection for immediate release tablets. The study utilized a database of 13,278 immediate-release tablets to train, validate, and test the MPNN model on the basis of Simplified Molecular-Input Line-Entry system (SMILES) of drug substances. The performance of the model was validated based on its ability to predict the probability of selecting an excipient reasonably. A web application named FormAI was developed using the Streamlit web framework and integrated with the trained model. The MPNN model demonstrated good performance, with an average Area Under Curve &gt; 0.98 and R2 &gt; 0.99, indicating its ability to predict the probability of selecting an excipient reasonably. The FormAI application provides a user-friendly platform for excipient selection. The results of the study demonstrate the potential of using AI and MPNN in drug formulation design, specifically in excipient selection for immediate-release tablets. The FormAI application provides a practical solution for pharmaceutical scientists and formulators.

Development, Physicochemical Characteristics and Pharmacokinetics of a New Sustained-Release Bilayer Tablet Formulation of Tramadol with an Immediate-Release Component for Twice-Daily Administration.

There are some potential concerns about the currently marketed solid oral dosage forms of tramadol, including decreased adherence to immediate-release (IR) formulations due to the high number of doses taken each day and the slow rise in the blood tramadol concentration after administration of sustained-release (SR) formulations, which may not achieve a rapid analgesic effect. To overcome these potential concerns, a twice-daily double-layered tablet formulation of tramadol comprising IR and SR layers was developed. This article reports studies that assessed its physicochemical and pharmacokinetic properties. Dissolution tests of five bilayer tablet formulations (designated tablets A-E) and pharmacokinetic studies of tablets A and B were conducted to investigate the appropriate ratio of the IR/SR layers in the double-layered tablet. Additionally, pharmacokinetic studies of three finished dosage formulations (tablets C-E) were performed in healthy adult males to investigate the effect of food intake on drug absorption. Adjusting the excipients and tramadol content in the IR and SR layers of tablets A-E altered their dissolution profiles in a manner that could be predicted based on their compositions. The IR layer was released within 15min, and the SR layer was slowly released over 10h. In the pharmacokinetic study, the time to maximum plasma concentration (tmax) of tramadol after administration of tablets A (IR:SR: 20:80mg) and B (40:60mg) was shorter than that of a commercially available SR tablet, and the half-life (t1/2) was longer than that of a commercially available IR tablet. For tablets C-E, administration after food did not affect the area under theconcentration-time curve (AUC) or maximum drug concentration (Cmax) of tramadol, but the tmax was prolonged by about 1 h compared with administration in fasting conditions. The mean ± standard deviation tmax and t1/2 for tablet D (IR:SR: 35:65 mg) in the fasting condition was 1.09 ± 0.56h and 7.82 ± 0.85h, respectively. The respective values in the fed condition were 2.47 ± 1.06h and 7.12 ± 0.85h, respectively. To address the potential concerns regarding existing formulations of tramadol, a twice-daily, extended-release bilayer formulation of tramadol consisting of an IR and SR layer was developed. Pharmacokinetic studies confirmed that the plasma tramadol concentration increased quickly after administration and was maintained over a long period of time.

Development of Sustained Release System Based on High Water-Absorbable Gel Formation Using Croscarmellose Sodium, Alkaline Excipients and HPMC (ACSH SR System); Novel Application of Croscarmellose Sodium as a Gel Former.

Croscarmellose sodium, generally used as a superdisintegrant in pharmaceutical formulations, is hydrolyzed to form the gel structure under basic pH conditions. Utilizing this property of croscarmellose sodium, we developed a novel sustained release (SR) system. Immediate release (IR) and SR tablets containing croscarmellose sodium, alkaline excipients and/or hydroxypropyl methylcellulose (HPMC) were prepared and examined for wet strength and in vitro drug release behavior. In vivo oral drug absorption was evaluated for IR tablets, HPMC tablets and our novel SR tablets in fasted Beagle dogs. To form the gel structure even under the physiological condition, alkaline excipients were added into the formulation containing croscarmellose sodium. Furthermore, HPMC was used to make the gel structure strong enough against mechanical destructive forces. The novel alkalized croscarmellose sodium-HPMC (ACSH) SR tablet, consisting of croscarmellose sodium, alkaline excipients, and HPMC, successfully sustained the release of acetaminophen, ibuprofen, or nicardipine hydrochloride, compared with the IR tablets. The ACSH SR system provided a better release of acetaminophen than the HPMC tablet without croscarmellose sodium in the release study using a small volume of liquid, suggesting that substantial release and subsequent absorption would be expected in the distal intestinal segments after oral dosing. The in vivo oral absorption study revealed that the ACSH SR system successfully suppressed and prolonged the plasma concentrations of acetaminophen. This novel ACSH SR system prepared with croscarmellose sodium, alkaline excipients, and HPMC, would be a promising SR formulation for enabling substantial drug absorption in the distal intestinal segments.

Systems Biology and Peptide Engineering to Overcome Absorption Barriers for Oral Peptide Delivery: Dosage Form Optimization Case Study Preceding Clinical Translation.

Oral delivery of peptides and biological molecules promises significant benefits to patients as an alternative to daily injections, but the development of these formulations is challenging due to their low bioavailability and high pharmacokinetic variability. Our earlier work focused on the discovery of MEDI7219, a stabilized, lipidated, glucagon-like peptide 1 agonist peptide, and the selection of sodium chenodeoxycholate (Na CDC) and propyl gallate (PG) as permeation enhancer combinations. We hereby describe the development of the MEDI7219 tablet formulations and composition optimization via in vivo studies in dogs. We designed the MEDI7219 immediate-release tablets with the permeation enhancers Na CDC and PG. Immediate-release tablets were coated with an enteric coating that dissolves at pH ≥ 5.5 to target the upper duodenal region of the gastrointestinal tract and sustained-release tablets with a Carbopol bioadhesive polymer were coated with an enteric coating that dissolves at pH ≥ 7.0 to provide a longer presence at the absorption site in the gastrointestinal tract. In addition to immediate- and enteric-coated formulations, we also tested a proprietary delayed release erodible barrier layer tablet (OralogiKTM) to deliver the payload to the target site in the gastrointestinal tract. The design of tablet dosage forms based on the optimization of formulations resulted in up to 10.1% absolute oral bioavailability in dogs with variability as low as 26% for MEDI7219, paving the way for its clinical development.

Formulation and characterization of amiodarone-methyl-beta-cyclodextrin inclusion complexes: A molecular modelling perspective

This study aimed to develop immediate-release tablets containing amiodarone hydrochloride (AM). AM is a BCS class II compound, i.e., high permeable, and poorly soluble. The interactions between amiodarone and methyl-β-cyclodextrin were DFT-based, theoretically measured, supporting the complexation of AM with cyclodextrin by using methyl-β-cyclodextrin through a spray-drying process. Thus, increasing substantially the drug solubility to 93.31% and 87.14%, respectively. Solubility studies demonstrated the formation of the Drug-Methyl-β-cyclodextrin inclusion complex with 1:1 stoichiometry. The complex formation was characterized by SBET, XRD, DSC, SEM, FTIR, and 1H NMR. Complementing, immediate-release tablets containing the inclusion complex were developed by direct compression, and in vitro dissolution studies were performed in gastrointestinal fluids using USP Pharmacopeia standard dissolution rate testing equipment. The dissolution rate of immediate-release tablets was substantially higher than the pristine drug in all mediums evaluated. These results confirm the application of methyl-β-cyclodextrin as an effective excipient for incorporation in novel dosage forms to increase the solubility of poorly soluble drugs.

Captopril Polyvinyl Alcohol/Sodium Alginate/Gelatin-Based Oral Dispersible Films (ODFs) with Modified Release and Advanced Oral Bioavailability for the Treatment of Pediatric Hypertension.

Hypertension can begin in childhood; elevated blood pressure in children is known as pediatric hypertension. Contrary to adult hypertension, there is a scarcity of commercial medications suitable for the treatment of pediatric hypertension. The aim of this study was to develop orally dispersible films (ODFs) loaded with captopril for the treatment of hypertension in children. Captopril-loaded ODFs were composed of different blends of synthetic polymers, such as polyvinyl alcohol (PVA) and polyvinyl pyrrolidone, and natural polymers, such as sodium alginate (SA) and gelatin. The ODFs were characterized based on their mechanical and thermal properties, drug content, surface morphology, in vitro disintegration, in vitro release, and bioavailability. A novel HPLC method with precolumn derivatization was developed to precisely and selectively determine captopril levels in plasma. A low concentration of PVA and a high concentration of SA generated ODFs with faster hydration and disintegration rates. SA-based films exhibited fast disintegration properties (1-2 min). The optimized modified-release film (F2) showed significant (p < 0.05) enhancement in bioavailability (AUC = 1000 ng min/mL), with a value 1.43 times that of Capoten® tablets (701 ng min/mL). While the plasma concentration peaking was in favor of the immediate-release tablet, Tmax was significantly prolonged by 5.4 times for the optimized ODF (3.59 h) compared with that of the tablets (0.66 h). These findings indicate uniform and sustained plasma concentrations, as opposed to the pulsatile and rapid plasma peaking of captopril from the immediate-release tablets. These findings suggest that the modified release of oral films could offer more favorable plasma profiles and better control of hypertension than the conventional release tablets.

Formulation and Evaluation of Pulsatile Drug Delivery System of Dexlansoprazole

Background: A pulsatile drug delivery system is intended to deliver drugs according to the circadian rhythm, or disease cycle. PDDS prepared by pulsincap technology contain a cross-linked hard gelatin capsule filled with the optimized immediate-release tablet, sodium alginate beads. Dexlansoprazole is used to treat the signs and symptoms of gastroesophageal reflux disease (GERD), erosive esophagitis, and stomach ulcers. Objective: The objective of the research is to develop and analyse a controlled-release pulsatile medication delivery system for the treatment of peptic ulcers that contains dexlansoprazole. Method: The Pulsincap system consists of a hard gelatin capsule containing an immediate-release tablet prepared by direct compression, sodium alginate beads prepared by the ionotropic gelatin method, and a hydrogel plug made through direct compression. The hydrogel plug was prepared by using various grades of HPMC polymer. The immediate-release tablet was prepared by direct compression. Result: The results of the present FTIR studies concluded that there was no interaction between dexlansoprazole and the excipient. Based on the evaluation parameter, it was found that the F2 tablet (1:2) ratio and 2% sodium alginate beads showed better results. Polymer HPMC K15M for Hydrogel showed the desired swelling time. Conclusion: It was concluded that the preparation of a pulsatile drug delivery system for dexlansoprazole through pulsincap technology can give drug release in a pulsed manner that is first immediate release, lag time, and sustain action.

Fused Deposition Modelling 3D-Printed Gastro-Retentive Floating Device for Propranolol Hcl Tablets.

Three-dimensional printing has revolutionized drug manufacturing and has provided a solution to the limitations associated with the conventional manufacturing method by designing complex drug delivery systems with customized drug release profiles for personalized therapies. The present investigation aims to design a gastric floating tablet with prolonged gastric floating time and sustained drug release profile. In the present study, a gastro retentive floating device (GRFD) was designed and fabricated using a fused deposition modelling (FDM)-based 3D printing technique. This device acts as a multifunctional dosage form exhibiting prolonged gastric retention time and sustained drug release profile with improved oral bioavailability in the upper gastrointestinal tract. Commercial polyvinyl alcohol (PVA) and polylactic acid (PLA) filaments were used to design GRFD, which was comprised of dual compartments. The outer sealed compartment acts as an air-filled chamber that imparts buoyancy to the device and the inner compartment is filled with a commercial propranolol hydrochloride immediate-release tablet. The device is designed as a round-shaped shell with a central opening of varying size (1 mm, 2 mm, 3 mm, and 4 mm), which acts as a drug release window. Scanning electron microscope (SEM) images were used to determine morphological characterization. The in vitro buoyancy and drug release were evaluated using the USP type II dissolution apparatus. All the designed GRFDs exhibit good floating ability and sustained drug release profiles. GRFDs fabricated using PLA filament show maximum buoyancy (>24 h) and sustained drug release for up to 10 h. The floating ability and drug release from the developed devices were governed by the drug release window opening size and the filament material affinity towards the gastric fluid. The designed GRFDs show great prospects in modifying the drug release characteristics and could be applied to any conventional immediate-release product.

Discriminative Dissolution Method Using the Open-Loop Configuration of the USP IV Apparatus to Compare Dissolution Profiles of Metoprolol Tartrate Immediate-Release Tablets: Use of Kinetic Parameters.

The use of the USP IV apparatus (flow-through cell) has gained acceptance in recent years due to its versatility and ability to discriminate due to its hydrodynamic conditions. Therefore, the objective of the present study was to develop a discriminative dissolution method in the USP IV apparatus using the open-loop configuration, as well as to propose a method to compare non-cumulative dissolution profiles obtained in the open-loop configuration considering kinetic parameters and validate its predictive power through its comparison with independent and dependent methods using five commercial immediate-release tablet drugs (one reference drug and four generic drugs) of metoprolol tartrate as a model drug. The comparison of the non-accumulated dissolution profiles consisted of determining the geometric ratio of Cmax, AUC0∞, AUC0Cmax, and Tmax (kinetic parameters) of the generic/reference drugs, whereby generic drugs "C" and "D" presented the highest probability of similarity since their 90% confidence intervals were included, or they were very close to the acceptance interval (80.00-125.00%). These results were consistent with the f2, bootstrap f2, and dissolution efficiency approaches (independent models). In conclusion, the proposed comparison method can be an important tool to establish similarity in dissolution profiles and to facilitate the development/selection of new formulations and positively ensure bioequivalence in clinical studies.