Image Sensor Communication Research Articles

Proposed Schemes for Image Sensors Compatibility in IEEE TG7r1 Image Sensor Communications

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

Performance analysis of smart digital signage system based on software-defined IoT and invisible image sensor communication

Everything in the world is being connected, and things are becoming interactive. The future of the interactive world depends on the future Internet of Things (IoT). Software-defined networking (SDN) technology, a new paradigm in the networking area, can be useful in creating an IoT because it can handle interactivity by controlling physical devices, transmission of data among them, and data acquisition. However, digital signage can be one of the promising technologies in this era of technology that is progressing toward the interactive world, connecting users to the IoT network through device-to-device communication technology. This article illustrates a novel prototype that is mainly focused on a smart digital signage system comprised of software-defined IoT (SD-IoT) and invisible image sensor communication technology. We have proposed an SDN scheme with a view to initiating its flexibility and compatibility for an IoT network-based smart digital signage system. The idea of invisible communication can make the users of the technology trendier to it, and the usage of unused resources such as images and videos can be ensured. In addition, this communication has paved the way for interactivity between the user and digital signage, where the digital signage and the camera of a smartphone can be operated as a transmitter and a receiver, respectively. The proposed scheme might be applicable to real-world applications because SDN has the flexibility to adapt with the alteration of network status without any hardware modifications while displays and smartphones are available everywhere. A performance analysis of this system showed the advantages of an SD-IoT network over an Internet protocol-based IoT network considering a queuing analysis for a dynamic link allocation process in the case of user access to the IoT network.

OCC-ID: New Broadcasting Service-Based Cloud Model and Image Sensor Communications

In recent decades, the main data traffic of mobile communication is based on the RF technology. Even though the efficiency from optimization for utilization or reuse is applied, there is a limitation of increased traffic demand of RF communication. Visible light communication (VLC) is a new technology that can cooperate with RF to address this limitation. The standard for VLC was published in 2011 as IEEE 802.15.7, which defined the specifications for the MAC layer and the PHY layer. This standard was one of the first for this technology. The decoded operation from emitting light at the receiver in IEEE 802.15.7 is mainly based on the photodetector. However, with the development of image sensors (matrix of photodiodes) on smart devices, the amendment of IEEE 802.15.7 specification is considered. The extension will focus mainly on image sensor communications, named optical camera communications (OCC). In this paper, we analyze the performance of a camera communications system based on different types of image sensor architecture. Then, we suggest OCC-ID, a new application for broadcasting service using camera communications and the cloud model. The proposed architecture is a typical deployment scenario of camera communications.

Novel 2D-sequential color code system employing Image Sensor Communications for Optical Wireless Communications

Abstract The IEEE 802.15.7r1 Optical Wireless Communications Task Group (TG7r1), also known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems, is of interest in this paper. The paper is mainly concerned with Image Sensor Communications (ISC) of TG7r1; however, the major challenge facing ISC, as addressed in the Technical Consideration Document (TCD) of TG7r1, is Image Sensor Compatibility among the variety of different commercial cameras on the market. One of the most challenging but interesting compatibility requirements is the need to support the verified presence of frame rate variation. This paper proposes a novel design for 2D-sequential color code. Compared to a QR-code-based sequential transmission, the proposed design of 2D-sequential code can overcome the above challenge that it is compatible with different frame rate variations and different shutter operations, and has the ability to mitigate the rolling effect as well as the rotating effect while effectively minimizing transmission overhead. Practical implementations are demonstrated and a performance comparison is presented.

Design and Implementation of a Novel Compatible Encoding Scheme in the Time Domain for Image Sensor Communication.

This paper presents a modulation scheme in the time domain based on On-Off-Keying and proposes various compatible supports for different types of image sensors. The content of this article is a sub-proposal to the IEEE 802.15.7r1 Task Group (TG7r1) aimed at Optical Wireless Communication (OWC) using an image sensor as the receiver. The compatibility support is indispensable for Image Sensor Communications (ISC) because the rolling shutter image sensors currently available have different frame rates, shutter speeds, sampling rates, and resolutions. However, focusing on unidirectional communications (i.e., data broadcasting, beacons), an asynchronous communication prototype is also discussed in the paper. Due to the physical limitations associated with typical image sensors (including low and varying frame rates, long exposures, and low shutter speeds), the link speed performance is critically considered. Based on the practical measurement of camera response to modulated light, an operating frequency range is suggested along with the similar system architecture, decoding procedure, and algorithms. A significant feature of our novel data frame structure is that it can support both typical frame rate cameras (in the oversampling mode) as well as very low frame rate cameras (in the error detection mode for a camera whose frame rate is lower than the transmission packet rate). A high frame rate camera, i.e., no less than 20 fps, is supported in an oversampling mode in which a majority voting scheme for decoding data is applied. A low frame rate camera, i.e., when the frame rate drops to less than 20 fps at some certain time, is supported by an error detection mode in which any missing data sub-packet is detected in decoding and later corrected by external code. Numerical results and valuable analysis are also included to indicate the capability of the proposed schemes.

Neural Network-Based Indoor Positioning Using Virtual Projective Invariants

Indoor positioning techniques has become a key research issue for future smart services because of the high market value in providing location-based services via smartphones and ondemand services. In image sensor communications (ISC) case, one of the main advantages of the indoor navigation system is that the LED itself can transmit its location information using visible light communication. In addition, the camera usually has an angle of arrival sensor that facilitates the precise determination of not only user position but also user orientation. However, because of the nonlinear and highly complicated relationship between 3D scenery and a pictured 2D image, the development of a complex mathematical model is needed to estimate user position using a camera. Neural network is a good approach for minimizing this complicated relationship. Hence, it is possible to develop a precise positioning technique without any complicated mathematical model between the 3D world and 2D image coordinates. This paper proposes a neural network-based novel positioning technique. The proposed method exploits the projective invariant properties of a line that is virtually constructed with the help of ISC. Then, a neural network scheme is used to extract the camera orientation information from that virtual line. Next, a simple mathematical equation is used to estimate user position. Simulation results show the proposed method has better performance than the previous methods.

A Visibility Check Method for Railway Signals using Image Sensor Communication

A Visibility Check Method for Railway Signals using Image Sensor Communication

An Optical Inter-Vehicle Communication System by Image Sensor Communication Technology(Telecommunications for Critical Use)

An Optical Inter-Vehicle Communication System by Image Sensor Communication Technology(Telecommunications for Critical Use)

The Prospects of the Image Sensor Communication

The Prospects of the Image Sensor Communication