Ideal Boundary Research Articles

Design optimization of phononic-fluidic resonator systems

Phononic-fluidic resonators utilize an acoustic fluid domain as a defect inside a solid metamaterial lattice, which can be used used to precisely measure acoustic properties of liquids. The design goal is to offer ideal boundary conditions for the acoustic resonator by matching defect resonance with phononic band gap. The design space of metamaterial or phononic crystal and fluidic resonator is nearly unlimited, especially when utilizing fully three-dimensional structures. In this work, we explore numerical shape and topology optimization to focus acoustic energy into the fluid domain and maximize the quality factor of the defect resonance. This requires the use of complex multi-frequency objective functions, while taking into account practical limits such as finite size and losses in the fluid and solid domains. Results highlight notable but limited improvements of quality factor with shape optimization starting from an initial design constrained by the maximum deformation possible. On the other hand, topology optimization results offer unique and unexpected ideas, and thus a deeper dive into the design space.

Symplectic Geometry of Teichmüller Spaces for Surfaces with Ideal Boundary

A hyperbolic 0-metric on a surface with boundary is a hyperbolic metric on its interior, exhibiting the boundary behavior of the standard metric on the Poincaré disk. Consider the infinite-dimensional Teichmüller spaces of hyperbolic 0-metrics on oriented surfaces with boundary, up to diffeomorphisms fixing the boundary and homotopic to the identity. We show that these spaces have natural symplectic structures, depending only on the choice of an invariant metric on sl(2,R)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mathfrak {sl}(2,\\mathbb {R})$$\\end{document}. We prove that these Teichmüller spaces are Hamiltonian Virasoro spaces for the action of the universal cover of the group of diffeomorphisms of the boundary. We give an explicit formula for the Hill potential on the boundary defining the moment map. Furthermore, using Fenchel–Nielsen parameters we prove a Wolpert formula for the symplectic form, leading to global Darboux coordinates on the Teichmüller space.

Seismic Performance of Cross-Shaped Partially Encased Steel–Concrete Composite Columns: Experimental and Numerical Investigations

Special-shaped partially encased steel–concrete composite (PEC) columns could not only improve the aesthetic effect and room space use efficiency, but also exhibit good mechanical performance under static load when used in multi-story residential and office buildings. However, research on the seismic performance of special-shaped PEC columns is insufficient and urgently needed. To investigate the seismic performance of cross-shaped partially encased steel–concrete composite (CPEC) columns, three CPEC columns were designed and tested under combined constant axial load and lateral cyclic load. The test results show that the CPEC columns had good load capacity and ductility, and that the columns failed because of concrete crushing and steel flange buckling after the yielding of the steel flange. The plump hysteresis loops indicated that the CPEC column also had good energy dissipation capacity. Due to the constraint of hydraulic jacks, increasing the load ratio would decrease the effective length, thereby increasing the load capacity of the CPEC column and decreasing the ductility. A finite element model was also established to simulate the response of the CPEC columns, and the simulated results agree well with the experimental results. Thereafter, an extensive parametric analysis was performed to study the influences of different parameters on the seismic performance of CPEC columns. For the CPEC column with an ideal hinged boundary condition at the top, its lateral load capacity gradually decreases with the growth of the load ratio and link spacing and increases with the rise of the steel yield strength, concrete compressive strength, flange and web thickness, and sectional aspect ratio. This research could provide a basis for future theoretical analyses and engineering application.

An Undersampling Method Approaching the Ideal Classification Boundary for Imbalance Problems

Data imbalance is a common problem in most practical classification applications of machine learning, and it may lead to classification results that are biased towards the majority class if not dealt with properly. An effective means of solving this problem is undersampling in the borderline area; however, it is difficult to find the area that fits the classification boundary. In this paper, we present a novel undersampling framework, whereby the clustering of samples in the majority class is conducted and segmentation is then performed in the boundary area according to the clusters obtained; this enables a better shape that fits the classification boundary to be obtained via the performance of random sampling in the borderline area of these segments. In addition, we hypothesize that there exists an optimal number of classifiers to be integrated into the method of ensemble learning that utilizes multiple classifiers that have been obtained via sampling to promote the algorithm. After passing the hypothesis test, we apply the improved algorithm to the newly developed method. The experimental results show that the proposed method works well.

Cladding-free Fermi arc surface states and topological directional couplers in ideal photonic Weyl metamaterials

Photons can freely propagate in a vacuum, making it not a simple insulator but rather a conductor for photons. Consequently, in topological photonics, domain wall structures with opposing effective mass terms are used as cladding to confine electromagnetic waves. This approach is necessary to demonstrate topological edge/surface waves and Fermi arc surface states (FASS). Here, we show that the cladding-free FASS with high field localization at the boundary can be achieved using ideal Weyl gyromagnetic metamaterials (GMs). In these GMs, the ideal Weyl semimetal phase exists due to the dispersionless longitudinal modes. At the boundary of the GMs-vacuum system, the cladding-free FASS connects the projections of Weyl nodes with opposite chirality, thanks to the bulk-boundary correspondence principle. We further confirm that chiral boundary modes can propagate without experiencing scattering or backward reflection, i.e., they can advance seamlessly approximately various types of defects. Remarkably, various types of topological directional couplers are achieved by utilizing cladding-free FASS in an ideal gyromagnetic medium. Our theoretical analysis reveals that the underlying operational principle for accomplishing these nonreflecting directional couplers is due to the single coupling channel between the cladding-free FASS and the multi-type scatterers of the continuous media. Furthermore, the controllable propagation and topological directional coupling of cladding-free FASS can be further explored by adjusting the ideal gyromagnetic medium and boundary configurations of the continuous media system. This research offers increased flexibility for the development of cladding-free and directionally coupled topological devices.

Copper-Modified Iron Oxide Nanoparticles: A Novel Catalyst for Effective Congo Red Dye Degradation in Wastewater Treatment

The raising worldwide water tainting from different sources has delivered admittance to unpolluted drinking water progressively testing. The release of effluents containing colors into water bodies become as a basic ecological worry lately. Regular treatment strategies are insufficient in wiping out these steady and risky poisons, requiring the investigation of novel methodologies. In this review, Cu-doped FeO nanoparticles were easily blended by using a co-precipitation strategy, and their synthetic qualities were entirely analyzed. These nanoparticles showed extraordinary adsorption abilities in the corruption of various color compounds. In particular, manufactured acidic color was focused on for expulsion utilizing metal-doped nanoparticles. Ideal boundaries for maximal acidic color not set in stone by surveying the adsorbent portion, beginning color focus, contact time, and temperature. The pH was distinguished as a critical variable, with the best incentive for maximal adsorption of Congo Red Dye viewed as less than 7. As indicated by late discoveries, Cu/FeO nanoparticles displayed unrivalled adsorption limit with regards to Congo Red Dye color at an ideal pH of 2, a measurement of 0.5 g/500 mL, a contact season of an hour and a half, and a color centralization of 150 ppm at 35° centigrade. Pseudo second order adsorption kinetic model exhibited amazing fitting outcomes for adsorption energy and balance information.

Static Response of Functionally Graded Porous Circular Plates via Finite Element Method

The main purpose of this paper is to investigate the axisymmetric bending response of functionally graded porous (FGP) circular plates. The material properties are changed continuously in the thickness direction of the plate. Three distinct porosity distributions uniform, symmetric and monolithic are employed. The effect of porosity on the axisymmetric bending analysis of circular plates is examined parametrically. In this study, clamped and roller supports which commonly serve to achieve ideal boundary conditions in numerous engineering applications are used. The finite element method is employed for numerical analysis. The principal of the potential energy is used to obtain the governing equations. To generate the model of the FGP circular plates, an eight-node quadratic quadrilateral element with two degrees of freedom on each node is utilized. The results of this study are confirmed by the existing published literature. A good agreement between the results of the presented model and the previous literature has been observed. The results of the present study show that plate deflection increases with the increase of the porosity coefficient and the ratio of radius to thickness of circular plates. By increasing the porosity coefficient, the displacement values of the plates made of uniform porosity distribution is effected more than those of other porosity distributions.

Testing Structural Elements under Multiaxial Loading: A Numerical Model of the Bench to Understand and Predict Complex Boundary Conditions

Airworthiness certification requires proof of structure strength, which is performed generally through a building block approach. To achieve this, representative intermediate-scale experiments generated by test benches are, in general, needed, in addition to material characterization on a coupons scale and structure testing on a large scale. The VERTEX test bench can generate the combined loading of tension/compression-shear-pressure on structural elements and was modelled with Finite Elements to perform virtual testing, representative of its intermediate-scale specificity. The numerous bolted joints of the bench were modelled and their behavior was identified in previous tests, so the model could quantitatively estimate the transfer function of the bench, which is the relationship between the displacements imposed by the jacks and the resulting loads on a given sample. The VERTEX model was identified to represent load shapes and amplitudes based on a training set and was later confronted by a validation set of tests of tension and shear. A model with ideal boundary conditions was also developed for a comparison, but it failed to predict some load shape specificities and did not give any indication of the loading amplitude. Application cases of the developed model are shown to assess a range of virtual testing possibilities.

Examining the Applicability of Direct Analytic Method (DAM) to Normal Modes of Poloidal Oscillations Under Symmetric and Asymmetric Boundary Conditions

AbstractA working Direct Analytic Method (DAM) model is envisaged to explain the normal modes of poloidal Alfven waves in the Earth's magnetosphere. The model solves the ideal, cold, magnetohydrodynamic (MHD) equations associated with transverse components of the magnetic perturbations in a dipolar magnetic field. DAM model is used to study the transverse poloidal waves in different regions of magnetosphere characterized by their L‐value and different plasma variability. The plasma density distribution is assumed to be governed by the standard power law, 1/rm, where r is the geocentric distance of any point of interest on the field line and m is the density index. The eigen frequencies and spatial structures are obtained analytically under different ideal ionospheric boundary conditions and the results are compared with the numerical solutions to establish the validity of the model. DAM, being an analytic model, is used to explain the distinctive structural features of transverse poloidal waves which are obtained under different boundary conditions, for different density indices. Furthermore, the application of the analytic model in the computation of eigen frequency as well as plasma density is demonstrated under different observational scenario.

Intelligent Optimization Framework for Future Communication Networks using Machine Learning

Confronting the undeniably complicated versatile correspondence organization, knowledge is the advancement heading of organization versatile improvement innovation later on. Portable correspondence information is a significant part representing things to come data society. AI calculation is embraced in the versatile improvement plot, which can facilitate different enhancement goals as per the progressions of climate and state and understand the ideal boundary arrangement. Canny portable terminal hardware is turning out to be increasingly well known. The combination and advancement of social, portable and area administrations make the conventional informal organization easily change to versatile correspondence organization. AI is a part of man-made consciousness. Its examination objective is to construct a framework which can advance a few guidelines from information and apply them to the resulting information handling. In light of chart hypothesis, this paper tackles the issue of correspondence network information really, and concentrates on the calculation of huge information examination in view of AI

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

The tempering process of plate glass involves rapidly cooling the high-temperature glass using an array of impinging air jets, inducing desired stress during cooling. Consequently, the formation of tempering stress results from the coupled interaction among flow, heat transfer, and stress. However, most previous studies have commonly neglected the influence of the flow field by assuming a uniform and constant distribution of heat transfer coefficients at different positions on the glass plate, which deviates from actual situations. This study employed a fluid-thermal-structural coupled simulation approach to predict the non-uniform residual stress distribution in tempered glass and investigate the interaction mechanisms among flow, heat transfer, and stress. Simultaneously, to validate the reliability of the method and model, this study experimentally investigated the single-nozzle jet impingement cooling for glass tempering. The study concluded that the simulation results were consistent with the experiment. Subsequently, a comparative analysis was performed between the fluid-thermal-structural coupled simulation results based on real boundary conditions and the thermal-structural coupled simulation results based on ideal uniform heat transfer coefficient boundary conditions. The results revealed non-uniform distributions of both heat transfer coefficient and temperature due to varying localized flow characteristics. Consequently, the ratio of surface compressive stress to internal tensile stress along the width direction of the glass was not a fixed value but ranged from 1.63 to 2.38. Furthermore, significant differences were observed in the stress distribution under the simulations of fluid-thermal-structural coupling and thermal-structural coupling. Therefore, it is recommended to employ the fluid-thermal-structural coupling method when predicting localized stress distribution.

Elastic Behavior of Transversely Isotropic Cylindrical Rock Samples under Uniaxial Compression Considering Ideal and Frictional Boundary Conditions

Conceptualizing sophisticated measurement set-ups as well as testing and evaluation procedures for laboratory experiments on anisotropic rocks requires a basic understanding of the potential specimen behavior. The focus of the present work was therefore to investigate the influence of different transversely isotropic parameters and their ratios on the elastic behavior of cylindrical rock samples in uniaxial compression tests. Parameter sets corresponding to soft anisotropic rocks were chosen based on naturally observed ranges for the five elastic transversely isotropic constants. Analytical results for the radial and vertical strain distributions around the sample circumference and a comparison with finite element simulations are presented. Further, the effect of interface friction between samples and loading platens was analyzed within the numerical models. The results suggest that radial strains around cylindrical anisotropic samples are rarely uniform except for specific combinations of parameters and isotropy plane inclinations. The effect of interface friction was found to have a clear influence on the developing elastic stress and strain distributions for samples with inclined isotropy planes. Nevertheless, no significant influence of frictional boundary conditions on the back-calibrated values of the elastic parameters could be identified, suggesting that friction-reducing measures in uniaxial compression tests on transversely isotropic samples with predominantly linear behavior are not required.

Estimating the Impact of “Humanizing” AI Assistants

More and more product designers are adopting anthropomorphic design strategies to facilitate the widespread use of AI assistants. However, existing studies show that the ideal boundary of the degree of anthropomorphism is still unclear. Therefore, we design two scenario experimental studies to explore the influence of different degrees of anthropomorphism on human–AI interaction quality. We also consider the difference in impact between two usage contexts: the hedonic and utilitarian contexts. The results show that different degrees of anthropomorphism significantly affect human–AI interaction quality in different ways; when AI assistants have a medium-level degree of anthropomorphism, the positive effect is pronounced. Furthermore, the positive relationship between anthropomorphism and human–AI interaction quality is more robust in the hedonic usage context; this positive effect disappears in the utilitarian usage context. We expect this study to provide practical guidance for AI product designers to achieve their products’ long-term feasibility and sustainability.

‘Dear Oxfam’: consumer-supporter-activism, NGO accountability and the boundaries of the political in the Barclays boycott, 1970-1991

ABSTRACT This article is about complaint-making as a form of political participation in the NGO sector. It focuses on public scrutiny of Oxfam’s use of Barclays Bank during the anti-apartheid boycott of the bank in the 1970s and 1980s and analyses pro-boycott and anti-boycott correspondence to Oxfam during this period. The article uses the Barclays boycott case to illustrate the dynamics of public-institution relationships during a period in which the NGO sector rapidly expanded and professionalised. It argues that not all donors favoured shallow or passive relationships with the NGOs that they supported. In this example, donors mobilised as a distinct type of ‘consumer-supporter-activist’. Finally, the article shows how the Barclays controversy stimulated public debate around the ideal boundaries between the ‘charitable’ and the ‘political’. It argues that apartheid South Africa stimulated far greater public engagement on this issue than other areas of Oxfam’s work.

Multiplicity of grain boundary structures and related energy variations

Ideal minimum-energy grain boundary (GB) structures are usually the only ones considered when characterizing GBs. This limited perspective provides an incomplete view of the possible structural variability of GBs. In the present study, phase field crystal (PFC) simulations are employed in a systematic search of GB states based on γ-surface sampling, demonstrating PFC to be a capable tool for this purpose. It is also shown that a set of microscopic degrees of freedom (DOF) must be considered in addition to the GB’s five macroscopic DOF when identifying variants in GB structure. This set of microscopic DOF comprises three components of relative crystal translation, plus one DOF describing the atomic density in the GB region. GB energy is taken as an example of a key property which is shown to exhibit a considerable spread due to variations in these microscopic DOF, at constant macroscopic DOF. The findings underline the need to consider a spectrum of GB energies for each macroscopic GB configuration, rather than a single value corresponding to an idealized minimum-energy structure. As part of the study, some computationally efficient strategies for setting up the PFC simulation model are also proposed.

The strain energy in loosening the clamped end of a beam (part I)

Using analytical equations, the paper aims to solve the dynamic behaviour of beams where a clamped end of the beam does not respect the ideal boundary conditions by introducing a weakening coefficient. In the paper, the characteristic equation for determining the eigenvalues and the relationship of the modal function and strain energy are derived. The results show the first six vibration modes for different values of the weakening coefficient which is considered in the clamped end and the evolution of the strain energy.

Role of Local Conductivities in the Plasmon Reflections at the Edges and Stacking Domain Boundaries of Trilayer Graphene.

We employed infrared scattering-type scanning near-field optical microscopy (IR-sSNOM) to study surface plasmon polaritons (SPPs) in trilayer graphene (TLG). Our study reveals systematic differences in near-field IR spectra and SPP wavelengths between Bernal (ABA) and rhombohedral (ABC) TLG domains on SiO2, which can be explained by stacking-dependent intraband conductivities. We also observed that the SPP reflection profiles at ABA-ABC boundaries could be mostly accounted for by an idealized domain boundary defined by the conductivity discontinuity. However, we identified distinct shapes in the SPP profiles at the edges of the ABA and ABC TLG, which cannot be solely attributed to idealized edges with stacking-dependent conductivities. Instead, this can be explained by the presence of various edge structures with local conductivities differing from those of bulk TLGs. Our findings unveil a new structural element that can control SPP, and provide insights into the structures and electronic states of the edges of few-layer graphene.

Measurement of traction properties of ceramic tiles and its attention for preventing pedestrian falls

Ceramic tiles are generally located in various community and industry venues because of their durability and ability to withstand blemishes, smells, and microorganisms. Thus, they are ideal for bathrooms, kitchens, entryways, laundry rooms, and utility areas. However, they can be extremely slippery in lubricated and even dusty environments. Regardless of the significance of this issue, the care aspects of ceramic tiles’ traction properties should have been systematically studied to avoid slip and fall incidence. The present study evaluates the slip resistance performance of ceramic tiles with different textures and identifies their controls on pedestrian fall prevention. For the ceramic tiles, the three most popular types of surface textures: smooth, moderately rough, and very rough, were chosen. Dynamic friction tests measured traction properties between the ceramic tiles and three shoes in four environments. The measurement results identified that the ceramic tiles exhibited high traction functioning under clean and dry conditions. Whilst the textures of ceramic tiles played a considerable role in soapsuds-covered moderately risky and oil-covered highly hazardous conditions. The current study also proposed a concept of an operational range of surface roughness and identified ideal boundaries of surface textures against diverse levels of slippery circumstances. The outcomes of the present study may be applied to enhance the surface design of ceramic tiles to preclude fall hazards in our community and workplaces.

BPAT-UNet: Boundary preserving assembled transformer UNet for ultrasound thyroid nodule segmentation

Background and Objective: Accurate and efficient segmentation of thyroid nodules on ultrasound images is critical for computer-aided nodule diagnosis and treatment. For ultrasound images, Convolutional neural networks (CNNs) and Transformers, which are widely used in natural images, cannot obtain satisfactory segmentation results, because they either cannot obtain precise boundaries or segment small objects. Methods: To address these issues, we propose a novel Boundary-preserving assembly Transformer UNet (BPAT-UNet) for ultrasound thyroid nodule segmentation. In the proposed network, a Boundary point supervision module (BPSM), which adopts two novel self-attention pooling approaches, is designed to enhance boundary features and generate ideal boundary points through a novel method. Meanwhile, an Adaptive multi-scale feature fusion module (AMFFM) is constructed to fuse features and channel information at different scales. Finally, to fully integrate the characteristics of high-frequency local and low-frequency global, the Assembled transformer module (ATM) is placed at the bottleneck of the network. The correlation between deformable features and features-among computation is characterized by introducing them into the above two modules of AMFFM and ATM. As the design goal and eventually demonstrated, BPSM and ATM promote the proposed BPAT-UNet to further constrain boundaries, whereas AMFFM assists to detect small objects. Results: Compared to other classical segmentation networks, the proposed BPAT-UNet displays superior segmentation performance in visualization results and evaluation metrics. Significant improvement of segmentation accuracy was shown on the public thyroid dataset of TN3k with Dice similarity coefficient (DSC) of 81.64% and 95th percentage of the asymmetric Hausdorff distance (HD95) of 14.06, whereas those on our private dataset were with DSC of 85.63% and HD95 of 14.53, respectively. Conclusions: This paper presents a method for thyroid ultrasound image segmentation, which achieves high accuracy and meets the clinical requirements. Code is available at https://github.com/ccjcv/BPAT-UNet.

A modified MERR model for predicting mode II fracture initiation angle considering boundary constraint effect

AbstractDuring the service process of brittle materials like marble, soda‐glass, and acrylic, mode II fracture is usually a typical failure mode. The fracture crack initiation, which is a critical factor affecting mode II fracture behavior, is an essential issue for understanding the fracture mechanism and determining fracture toughness. This paper proposed a modified maximum energy release rate model to predict the mode II fracture initiation angle through superimposing two idealized boundary conditions, remote loading, and crack‐face traction. The degree of the boundary constraint effect in finite‐size specimens was quantified by introducing the dimension‐ratio parameter. As experimentally validating through tension‐loading shear fracture tests of brittle poly(methyl methacrylate) (PMMA), the proposed model was demonstrated to be a good prediction of the mode II fracture initiation angle. The applicability of the proposed model was also verified with other brittle materials and fracture test techniques in references. The findings provide an insightful understanding of the mode II fracture behavior of brittle materials.