Hydroxyl Research Articles

Methyl 2-hydroxy-4-iodobenzoate

The structure of the title compound, C8H7IO3, at 90 K has monoclinic (P21/c) symmetry. The extended structure is layered and displays intermolecular and intramolecular hydrogen bonding arising from the same OH group.

Unveiling the electronic origin of lanthanide based Metal Organic Framework with ideal spin filtering capacity

Recently, a three dimensional metal-organic framework (MOF) based on Dy(III) and the L-tartrate ligand was experimentally shown to exhibit a spin polarization (SP) power of 100% at room temperature. The material’s spin filtering ability was ascribed to the chiral-induced spin selectivity (CISS) effect. In this work, we computationally characterize the electronic structure of this MOF, revealing that the high SP of the material is linked to the asymmetric arrangement, around the Fermi level, of the alpha- and beta-spin electron states arising from the 4f-states of the lanthanide Dy atom, which results in two different conduction channels (band gaps) for each spin state. Based on the understanding gathered in this work, we propose that the substitution of the hydroxyl groups of the ligand by mercaptan groups should boost the electrical conductivity, while retaining the spin filtering power of the material.

Formation of hydrogen bonding network of methane sulfonic acid at low degree of hydration (MSA)m·(H2O)n (m = 1–2 and n = 1–5)

This study employs ab initio calculations based on density functional theory (DFT) to investigate the structural properties, 1H-NMR spectra, and vibrational spectra of methane sulfonic acid (MSA) at low degree of hydration. The findings reveal that energetically stable structures are formed by small clusters consisting of one or two MSA molecules (m = 1 and 2) and one or two water molecules in (MSA)m·(H2O)n (m = 1–2 and n = 1–5).These stable structures arise from the formation of strong cyclic hydrogen bonds between the proton of the hydroxyl (OH) group in MSA and the water molecules. However, clusters containing three or more water molecules (n > 2) exhibit proton transfer from MSA to water, resulting in the formation of ion-pairs composed of CH3SO3− and H3O+species. The measured 1H-NMR spectra demonstrate the presence of hydrogen-bonded interactions between MSA and water, with a single MSA molecule interacting with water molecules. This interaction model accurately represents the hydrogen bonding network, as supported by the agreement between the experimental and calculated NMR chemical shift results.

Studies on the Biomimetic Synthesis of Marine Ladder Polyethers via Endo‐Selective Epoxide‐to‐Epoxonium Ring‐Opening Cascades

Marine ladder polyethers have attracted the attention of chemists and biologists because of their potent biological activities. Synthetic chemists have attempted to construct their polyether frameworks by epoxide ring‐opening cascades, as Nakanishi hypothesis describes. However, Baldwin’s rules of ring closure state that exo‐selective intramolecular cyclization of epoxy alcohols is preferred over endo‐selective cyclization. Herein, we investigated epoxide ring‐opening cascades of polyepoxy alcohols in [EMIM]BF4/PFTB (1‐ethyl‐3‐methylimidazolium tetrafluoroborate /perfluoro‐tert‐butyl alcohol) and found that all‐endo products were formed via epoxide‐to‐epoxonium ring‐opening cyclizations (not restricted by Baldwin’s rules, which only apply to intramolecular hydroxyl‐to‐epoxide cyclizations). We determined that the key factor enabling polyepoxy alcohols to undergo a high proportion of all‐endo‐selective cyclizations was inhibition of exo‐selective hydroxyl‐to‐epoxide cyclization starting from the terminal hydroxyl group of a polyepoxy alcohol. By introducing a slow‐release protecting group to the terminal hydroxyl group, we could markedly increase the cyclization yields of polyether fragments with hydrogen atoms at the ring junctions. For the first time, we constructed consecutively fused six‐membered‐ring and fused seven‐, eight‐, and nine‐membered‐ring polyether fragments by epoxide‐to‐epoxonium ring‐opening cyclizations through the addition of a suitable Lewis acid. We also suggest that the biosynthesis of marine ladder polyethers may proceed via epoxide‐to‐epoxonium ring‐opening cyclization of polyepoxide.

Studies on the Biomimetic Synthesis of Marine Ladder Polyethers via Endo-Selective Epoxide-to-Epoxonium Ring-Opening Cascades.

Marine ladder polyethers have attracted the attention of chemists and biologists because of their potent biological activities. Synthetic chemists have attempted to construct their polyether frameworks by epoxide ring-opening cascades, as Nakanishi hypothesis describes. However, Baldwin's rules of ring closure state that exo-selective intramolecular cyclization of epoxy alcohols is preferred over endo-selective cyclization. Herein, we investigated epoxide ring-opening cascades of polyepoxy alcohols in [EMIM]BF4/PFTB (1-ethyl-3-methylimidazolium tetrafluoroborate /perfluoro-tert-butyl alcohol) and found that all-endo products were formed via epoxide-to-epoxonium ring-opening cyclizations (not restricted by Baldwin's rules, which only apply to intramolecular hydroxyl-to-epoxide cyclizations). We determined that the key factor enabling polyepoxy alcohols to undergo a high proportion of all-endo-selective cyclizations was inhibition of exo-selective hydroxyl-to-epoxide cyclization starting from the terminal hydroxyl group of a polyepoxy alcohol. By introducing a slow-release protecting group to the terminal hydroxyl group, we could markedly increase the cyclization yields of polyether fragments with hydrogen atoms at the ring junctions. For the first time, we constructed consecutively fused six-membered-ring and fused seven-, eight-, and nine-membered-ring polyether fragments by epoxide-to-epoxonium ring-opening cyclizations through the addition of a suitable Lewis acid. We also suggest that the biosynthesis of marine ladder polyethers may proceed via epoxide-to-epoxonium ring-opening cyclization of polyepoxide.

Mesoporous silica nanoparticles as a drug delivery mechanism.

Research in intelligent drug delivery systems within the field of biomedicine promises to enhance drug efficacy at disease sites and reduce associated side effects. Mesoporous silica nanoparticles (MSNs), characterized by their large specific surface area, appropriate pore size, and excellent biocompatibility, have garnered significant attention as one of the most effective carriers for drug delivery. The hydroxyl groups on their surface are active functional groups, facilitating easy functionalization. The installation of controllable molecular machines on the surface of mesoporous silica to construct nanovalves represents a crucial advancement in developing intelligent drug delivery systems (DDSs) and addressing the issue of premature drug release. In this review, we compile several notable and illustrative examples of MSNs and discuss their varied applications in DDSs. These applications span regulated and progressive drug release mechanisms. MSNs hold the potential to enhance drug solubility, improve drug stability, and mitigate drug toxicity, attributable to their ease of functionalization. Furthermore, intelligent hybrid nanomaterials are being developed, featuring programmable properties that react to a broad spectrum of stimuli, including light, pH, enzymes, and redox triggers, through the use of molecular and supramolecular switches.

Supercritical CH3OH-Triggered Isotype Heterojunction and Groups in g-C3N4 for Enhanced Photocatalytic H2 Evolution.

The structure tuning of bulk graphitic carbon nitride (g-C3N4) is a critical way to promote the charge carriers dynamics for enhancing photocatalytic H2-evolution activity. Exploring feasible post-treatment strategies can lead to effective structure tuning, but it still remains a great challenge. Herein, a supercritical CH3OH (ScMeOH) post-treatment strategy (250-300 °C, 8.1-11.8 MPa) is developed for the structure tuning of bulk g-C3N4. This strategy presented advantages of time-saving (less than 10 min), high yield (over 80%), and scalability due to the enhanced mass transfer and high reactivity of ScMeOH. During the ScMeOH post-treatment process, CH3OH molecules diffused into the interlayers of g-C3N4 and subsequently participated in N-methylation and hydroxylation reactions with the intralayers, resulting in a partial phase transformation from g-C3N4 into carbon nitride with a poly(heptazine imide)-like structure (Q-PHI) as well as abundant methyl and hydroxyl groups. The modified g-C3N4 showed enhanced photocatalytic activity with an H2-evolution rate 7.2 times that of pristine g-C3N4, which was attributed to the synergistic effects of the g-C3N4/Q-PHI isotype heterojunction construction, group modulation, and surface area increase. This work presents a post-treatment strategy for structure tuning of bulk g-C3N4 and serves as a case for the application of supercritical fluid technology in photocatalyst synthesis.

Synthesis and evaluation of pyridine-3-carboxamide analogs as effective agents against bacterial wilt in tomatoes

This study focused on developing novel pyridine-3-carboxamide analogs to treat bacterial wilt in tomatoes caused by Ralstonia solanacearum. The analogs were synthesized through a multistep process and their structures confirmed using spectroscopy. Molecular docking studies identified the most potent analog from the series. A specific analog, compound 4a, was found to significantly enhance disease resistance in tomato plants infected with R. solanacearum. The structure–activity relationship analysis showed the positions and types of substituents on the aromatic rings of compounds 4a–i strongly influenced their biological activity. Compound 4a, with a chloro group at the para position on ring C and hydroxyl group at the ortho position on ring A, was exceptionally effective against R. solanacearum. When used to treat seeds, the analogs displayed remarkable efficacy, especially compound 4a which had specific activity against bacterial wilt pathogens. Compound 4a also promoted vegetative and reproductive growth of tomato plants, increasing seed germination and seedling vigor. In plants mechanically infected with bacteria, compound 4a substantially reduced the percentage of infection, pathogen quantity in young tissue, and disease progression. The analogs were highly potent due to their amide linkage. Molecular docking identified the best compounds with strong binding affinities. Overall, the strategic design and synthesis of these pyridine-3-carboxamide analogs offers an effective approach to targeting and controlling R. solanacearum and bacterial wilt in tomatoes.

Utilizing Rapid Hydrogen Peroxide Generation from 6-Hydroxycatechol to Design Moisture-Activated, Self-Disinfecting Coating.

A coating that can be activated by moisture found in respiratory droplets could be a convenient and effective way to control the spread of airborne pathogens and reduce fomite transmission. Here, the ability of a novel 6-hydroxycatechol-containing polymer to function as a self-disinfecting coating on the surface of polypropylene (PP) fabric was explored. Catechol is the main adhesive molecule found in mussel adhesive proteins. Molecular oxygen found in an aqueous solution can oxidize catechol and generate a known disinfectant, hydrogen peroxide (H2O2), as a byproduct. However, given the limited amount of moisture found in respiratory droplets, there is a need to enhance the rate of catechol autoxidation to generate antipathogenic levels of H2O2. 6-Hydroxycatechol contains an electron donating hydroxyl group on the 6-position of the benzene ring, which makes catechol more susceptible to autoxidation. 6-Hydroxycatechol-coated PP generated over 3000 μM of H2O2 within 1 h when hydrated with a small amount of aqueous solution (100 μL of PBS). The generated H2O2 was three orders of magnitude higher when compared to the amount generated by unmodified catechol. 6-Hydroxycatechol-containing coating demonstrated a more effective antimicrobial effect against both Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria when compared to unmodified catechol. Similarly, the self-disinfecting coating reduced the infectivity of both bovine viral diarrhea virus and human coronavirus 229E by as much as a 2.5 log reduction value (a 99.7% reduction in viral load). Coatings containing unmodified catechol did not generate sufficient H2O2 to demonstrate significant virucidal effects. 6-Hydroxycatechol-containing coating can potentially function as a self-disinfecting coating that can be activated by the moisture present in respiratory droplets to generate H2O2 for disinfecting a broad range of pathogens.

Starch Gel Electrolyte and its Interaction with Trivalent Aluminum for Aqueous Aluminum-Ion Batteries: Enhanced Low Temperature Electrochemical Performance.

This study explores trivalent Al interaction with aqueous starch gel in the presence of two different anions through salting effect. Salting-out nature of Al2(SO4)3·18H2O with starch gel causes precipitation of starch; this happens due to competitive anion-water complex formation over starch-water interaction, thereby reducing polymer solubility. Salting-in effect of AlCl3 with starch gel happens through Al3+ cation interaction with hydroxyl group of starch and increases polymer solubility, making gel electrolyte viable for battery applications. Prepared gel electrolyte exhibits ionic conductivity of 1.59mS cm-1 and a high tAl 3+ value of 0.77. The gel electrolyte's performance is studied using two different cathodes, the Al|MoO3 cell employing starch gel electrolyte achieves discharge capacity of 193mA h g-1 and Al|MnO2 cell achieves discharge capacity of 140mA h g-1 @0.1 A g-1 for first cycle. The diffusion coefficient of both cells using starch gel electrolyte is calculated and found to be 2.1×10-11cm2 s-1 for Al|MoO3 and 3.1×10-11 cm2 s-1 for Al|MnO2 cells. The Al|MoO3 cell at lower temperature shows improved electrochemical performance with a specific capacity retention of ≈87.8% over 90 cycles. This kind of aqueous gel electrolyte operating at low temperature broadens the application for next generation sustainable batteries.

Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability

AbstractMaintaining high surface area and porosity at high temperatures is important when considering aerogels for use in thermal management systems. The mesoporous structure of aerogels results in extremely low thermal conductivity, making them lightweight, high performance insulating materials. Maintaining these properties requires innovative routes to suppress sintering and pore collapse as use temperatures rise. The current work aims to improve the pore structure stability of yttria‐stabilized zirconia aerogels by the addition of a SiO2 coating. The functionalization of surface hydroxyl groups by the addition of SiO2 is hypothesized to mitigate condensation reactions, which are a driving force for shrinkage and pore structure collapse. Zirconia aerogels with 0, 10, and 30 mol% yttria (YO1.5) additions were coated in a tetraethyl orthosilicate (TEOS) solution and exposed to temperatures up to 1200°C. Crystal structure, pore structure, and aerogel morphology were investigated to understand changes in aerogel thermal stability. The SiO2 coating exhibited a greater influence on pore stability over yttria concentration, with specific surface area of the coated aerogels being twice that of the uncoated aerogels up to 1000°C. However, the presence of the SiO2 coating promoted rapid sintering and densification at 1200°C, establishing an upper use temperature for SiO2 and a need to develop other coating chemistries.

Synergetic Manipulation Mechanism of Single-Atom M-N4 and M-OH (M = Mn, Fe, Co, Ni) Sites for Ozone Activation: Theoretical Prediction and Experimental Verification.

Carbon-based single-atom catalysts (SACs) have been gradually introduced in heterogeneous catalytic ozonation (HCO), but the interface mechanism of O3 activation on the catalyst surface is still ambiguous, especially the effect of a surface hydroxyl group (M-OH) at metal sites. Herein, we combined theoretical calculations with experimental verifications to comprehensively investigate the O3 activation mechanisms on a series of conventional SAC structures with N-doped nanocarbon substrates (MN4-NCs, where M = Mn, Fe, Co, Ni). The synergetic manipulation effect of the metal atom and M-OH on O3 activation pathways was paid particular attention. O3 tends to directly interact with the metal atom on MnN4-NC, FeN4-NC, and NiN4-NC catalysts, among which MnN4-NC has the best catalytic activity for its relatively lower activation energy barrier of O3 (0.62 eV) and more active surface-adsorbed oxygen species (Oads). On the CoN4-NC catalyst, direct interaction of O3 with the metal site is energetically infeasible, but O3 can be activated to generate Oads or HO2 species from direct or indirect participation of M-OH sites. The experimental results showed that 90.7 and 82.3% of total organic carbon (TOC) was removed within 40 min during catalytic ozonation of p-hydroxybenzoic acid with MnN4-NC and CoN4-NC catalysts, respectively. Phosphate quenching, catalyst characterization, and EPR measurement further supported the theoretical prediction. This contribution provides fundamental insights into the O3 activation mechanism on SACs, and the methods and ideals could be helpful for future studies of environmental catalysis.

Study of Surface Chemistry, Temperature and Strain Rate on the Tensile Properties of Monolayer Graphene Oxide

The mechanical properties of graphene oxide (GO) during tensile fracture were studied using molecular dynamics methods, and the influence of hydroxyl and epoxy groups on the mechanical properties of GO was explored. In addition, the changes in mechanical properties of GO under different temperatures and strain rates were studied to gain a deeper understanding of its mechanical behavior. The results indicate that hydroxyl and epoxy groups have a significant influence on the elastic modulus, ultimate stress, and ultimate strain of GO. The presence of hydroxyl and epoxy groups can alter the molecular structure of GO, thereby affecting its ultimate stress and strain. When the number of hydroxyl groups is 16 and the number of epoxy groups is 20, the ultimate stress decreases by about 31% and the elastic modulus decreases by about 20%. The variation of elastic modulus, ultimate stress, and ultimate strain of GO with temperature was studied at three temperatures: 300[Formula: see text]K, 500[Formula: see text]K, and 800[Formula: see text]K. As the temperature increases, the amplitude of atomic vibration increases and internal defects and cracks in GO continue to form and expand. At the same time, its coefficient of thermal expansion also increases, causing deformation and loosening of the crystal structure, resulting in a decrease of about 10% in the ultimate stress of GO, and a slight decrease in the ultimate strain and elastic modulus. Finally, the influence of different strain rates on the mechanical properties of GO was studied. As the strain rate increases, the intermolecular interactions within GO are rapidly altered, and the previously loose structure gradually becomes tightly ordered, resulting in an increasing trend in the elastic modulus, ultimate stress, and ultimate strain of GO.

Hydroxyl-Bonded Co Single Atom Site on Boroncarbonitride Surface Realizes Non-sacrificial H2O2 Synthesis in the Near-Infrared Region.

Photocatalytic synthesis of hydrogen peroxide (H2O2) from O2 and H2O under near-infrared light is a sustainable renewable energy production strategy, but challenging reaction. The bottleneck of this reaction lies in the regulation of O2 reduction path by photocatalyst. Herein, we construct the center of the one-step two-electron reduction (OSR) pathway of O2 for H2O2 evolution via the formation of the hydroxyl-bonded Co single-atom sites on boroncarbonitride surface (BCN-OH2/Co1). Our experimental and theoretical prediction results confirm that the hydroxyl group on the surface and the electronic band structure of BCN-OH2/Co1 are the key factor in regulating the O2 reduction pathway. In addition, the hydroxyl-bonded Co single-atom sites can further enrich O2 molecules with more electrons, which can avoid the one-electron reduction of O2 to •O2 -, thus promoting the direct two-electron activation hydrogenation of O2. Consequently, BCN-OH2/Co1 exhibited a high H2O2 evolution apparent quantum efficiency of 0.8% at 850nm, better than most of the previously reported photocatalysts. This study reveals an important reaction pathway for the generation of H2O2, emphasizing that precise control of the active site structure of the photocatalyst is essential for achieving efficient conversion of solar-to-chemical. This article is protected by copyright. All rights reserved.

Powdered Cogon Grass (Imperata cylindrica) as a Biosorbent for the Removal of Iron (II)

Powdered Cogon Grass (Imperata cylindrica) as a Biosorbent for the Removal of Iron (II)

Structural characterization and comparative analysis of polymorphic forms of psilocin (4-hydroxy-N,N-dimethyltryptamine)

The title compound, C12H16N2O, is a hydroxy-substituted monoamine alkaloid, and the primary metabolite of the naturally occurring psychedelic compound psilocybin. Crystalline forms of psilocin are known, but their characterization by single-crystal structure analysis is limited. Herein, two anhydrous polymorphic forms (I and II) of psilocin are described. The crystal structure of polymorphic Form I, in space group P21/c, was first reported in 1974. Along with the redetermination to modern standards and unambiguous location of the acidic H atom and variable-temperature single-crystal unit-cell determinations for Form I, the Form II polymorph of the title compound, which crystallizes in the monoclinic space group P21/n, is described for the first time. The psilocin molecules are present in both forms in their phenol–amine tautomeric forms (not resolved in the 1974 report). The molecules in Forms I and II, however, feature different conformations of their N,N-dimethyl ethylene substituent, with the N—C—C—C link in Form I being trans and in Form II being gauche, allowing the latter to bend back to the hydroxyl group of the same molecule, leading to the formation of a strong intramolecular O—H...N hydrogen bond between the hydroxyl moiety and ethylamino-nitrogen group. In the extended structure of Form II, the molecules form one-dimensional strands through N—H...O hydrogen bonds from the indole group to the oxygen atom of the hydroxyl moiety of an adjacent molecule. Form II exhibits whole-molecule disorder due to a pseudo-mirror operation, with an occupancy ratio of 0.689 (5):0.311 (5) for the two components. In contrast, Form I does not feature intramolecular hydrogen bonds but forms a layered structure through intermolecular N—H...O and O—H...N hydrogen bonds.

Structural basis for double-stranded RNA recognition by SID1.

The nucleic acid transport properties of the systemic RNAi-defective (SID) 1 family make them attractive targets for developing RNA-based therapeutics and drugs. However, the molecular basis for double-stranded (ds) RNA recognition by SID1 family remains elusive. Here, we report the cryo-EM structures of Caenorhabditis elegans (c) SID1 alone and in complex with dsRNA, both at a resolution of 2.2 Å. The dimeric cSID1 interacts with two dsRNA molecules simultaneously. The dsRNA is located at the interface between β-strand rich domain (BRD)1 and BRD2 and nearly parallel to the membrane plane. In addition to extensive ionic interactions between basic residues and phosphate backbone, several hydrogen bonds are formed between 2'-hydroxyl group of dsRNA and the contact residues. Additionally, the electrostatic potential surface shows three basic regions are fitted perfectly into three major grooves of dsRNA. These structural characteristics enable cSID1 to bind dsRNA in a sequence-independent manner and to distinguish between DNA and RNA. The cSID1 exhibits no conformational changes upon binding dsRNA, with the exception of a few binding surfaces. Structural mapping of dozens of loss-of-function mutations allows potential interpretation of their diverse functional mechanisms. Our study marks an important step toward mechanistic understanding of the SID1 family-mediated dsRNA uptake.

Alkaline Fading of Malachite Green in β-Cyclodextrins

The basic hydrolysis of Malachite Green (MG) in the presence of β-Cyclodextrin (β-CD) has been studied using UV-Vis spectroscopic techniques and at 20 °C. β-CD was found to catalyze the basic hydrolysis. Indeed, this basic hydrolysis is catalyzed by the interaction cyclodextrin hydroxyl group, in its deprotonated form with the carbocation in the host-guest complex. The proposed model has been successfully applied to a reaction catalyzed by CD. It considers two simultaneous pathways in the aqueous medium involving free hydroxyl ions and the substrate-CD complex. The model allows us to obtain the kinetic parameters including the bimolecular rate constant between MG and HO− in bulk water (kw = 1.47 ± 0.01 mol−1s−1), the rate constant between MG and the deprotonated hydroxyl group of β-CD inside the host-guest complex (kCD = 0.25 ± 0.03 s−1) and the binding constant of MG inside the β-CD (KS = 2500 ± 50). This behavior is like the hydrolysis of Cristal Violet (CV) in the same reaction media.

Enhanced pyroptosis induction with pore-forming gene delivery for osteosarcoma microenvironment reshaping

Osteosarcoma is the most common malignant bone tumor without efficient management for improving 5-year event-free survival. Immunotherapy is also limited due to its highly immunosuppressive tumor microenvironment (TME). Pore-forming gasdermins (GSDMs)-mediated pyroptosis has gained increasing concern in reshaping TME, however, the expressions and relationships of GSDMs with osteosarcoma remain unclear. Herein, gasdermin E (GSDME) expression is found to be positively correlated with the prognosis and immune infiltration of osteosarcoma patients, and low GSDME expression was observed. A vector termed as LPAD contains abundant hydroxyl groups for hydrating layer formation was then prepared to deliver the GSDME gene to upregulate protein expression in osteosarcoma for efficient TME reshaping via enhanced pyroptosis induction. Atomistic molecular dynamics simulations analysis proved that the hydroxyl groups increased LPAD hydration abilities by enhancing coulombic interaction. The upregulated GSDME expression together with cleaved caspase-3 provided impressive pyroptosis induction. The pyroptosis further initiated proinflammatory cytokines release, increased immune cell infiltration, activated adaptive immune responses and create a favorable immunogenic hot TME. The study not only confirms the role of GSDME in the immune infiltration and prognosis of osteosarcoma, but also provides a promising strategy for the inhibition of osteosarcoma by pore-forming GSDME gene delivery induced enhanced pyroptosis to reshape the TME of osteosarcoma.

Electric Double Layer Oriented Eutectic Additive Design towards Stable Zn Anodes with A High Depth of Discharge.

ZnSO4-based electrolytes for aqueous zinc ion batteries (AZIBs) fail to meet practical application metrics due to hydrogen evolution reaction (HER) and dendrite growth. In this work, we rationally designed a highly polarized eutectic additive, glycerophosphorylcholine (GPC), to regulate the EDL structure for stable Zn anodes with a high depth of discharge (DOD). On one hand, GPC molecules with abundant hydroxyl groups can precisely regulate the hydrogen bond network in EDL to suppress HER. On the other hand, the enrichment of GPC at the interface is positively responsible for the negative charge density on the Zn surface, which leads to the formation of a robust ZnxPyOz-rich solid-electrolyte interphase (SEI) and terminates dendrite growth in the charge-rich sites. This EDL-oriented eutectic additive engineering enables highly reversible and selectively (002)-textured Zn anodes to operate for over 1450h at a high DOD of 45.3%. Meanwhile, a high-capacity (185.7 mAh g-1) aqueous Zn||VS2 full cell shows remarkable cycling stability over 220 cycles with an excellent capacity retention of 90.4% even at a low current density of 0.1 A g-1 (0.5 C). This work sheds light on electrolyte design and interface engineering for high-performance aqueous batteries. This article is protected by copyright. All rights reserved.