Hydrophobic Polypeptide Research Articles

Non-chromatographic purification of thermostable endoglucanase from Thermotoga maritima by fusion with a hydrophobic elastin-like polypeptide

Endoglucanase EG12B from Thermotoga maritima is a thermophilic cellulase that has great potential for industrial applications. Here, to enable the selective purification of EG12B in a simple and efficient manner, an elastin-like polypeptide (ELP), which acts as a thermally responsive polypeptide, was fused with EG12B to enable its inverse phase transition cycling (ITC). A small gene library comprising ELPs from ELP5 to ELP50 was constructed using recursive directional ligation by plasmid reconstruction. ELP50 was added to the C-terminus of EG12B as a fusion tag to obtain the expression vector pET28-EG12B-ELP50, which was transformed into Escherichia coli BL21 (DE3) to enable the expression of fusion protein via IPTG induction. Gray scanning analysis revealed that the EG12B-ELP50 expression level was up to about 35% of the total cellular proteins. After three rounds of ITC, 8.14 mg of EG12B-ELP50 was obtained from 500-mL lysogeny broth culture medium. The recovery rate and purification fold of EG12B-ELP50 purified by ITC reached 78.1% and 11.8, respectively. The cellulase activity assay showed that EG12B-ELP50 had a better thermostability, higher optimal temperature, and longer half-life than those of free EG12B. Overall, our results suggested that ELP50 could be used as a favorable fusion tag, providing a rapid, simple, and inexpensive strategy for non-chromatographic target-protein purification.

Application of short hydrophobic elastin-like polypeptides for expression and purification of active proteins.

To investigate the application of short elastin-like polypeptides (ELPs) in the purification of bioactive proteins, short hydrophobic ELP[I] n (n = 30, 40, 50) tags were constructed. Both the ELP[I] n tags and the ELP[I] n -Trx fusion proteins could be stably expressed in Escherichia coli and purified by inverse transition cycling, respectively. Total protein concentrations determined by BCA protein assay showed that the yield of the fusion proteins decreased with increasing ELP length. Measurements of the inverse transition temperature (T t) of the ELP[I] n -Trx under different salts or PEG8000 concentrations showed decreased T t upon elevated concentrations; while, all the T ts were suitable for generating proteins from 4 to 37.5ºC. Furthermore, to identify a linker peptide for bioactive protein production without the need to remove the ELP[I] n tag, the activity of eGFP protein fused with ELP[I]30 tag by either a poly-N or a G4S linker was quantified using a fluorescence spectrophotometer. The results indicated that the ELP[I]30-eGFP fusion proteins with the poly-N linker showed higher fluorescence levels than those with the G4S linker. Our results demonstrated that short ELP[I] n tags with low T t were useful in protein expression and purification, and poly-N linker played the key role in producing bioactive proteins without the need to remove the ELPs.

Genome-wide identification and characterization of the lateral organ boundaries domain gene family in Brassica rapa var. rapa

The Lateral Organ Boundaries Domain (LBD) genes encode highly conserved plant-specific LOB domain proteins which regulate growth and development in various species. However, members of the LBD gene family have yet to be identified in Brassica rapa var. rapa. In the present study, fifty-nine LBD genes were identified and distributed on 10 chromosomes. The BrrLBD proteins are predicted to encode hydrophobic polypeptides between 118 and 394 amino acids in length and with molecular weights ranging from 13.31 to 44.24 kDa; the theoretical pI for these proteins varies from 4.83 to 9.68. There were 17 paralogous gene pairs in the BrrLBD family, suggesting that the amplification of the BrrLBD gene family involved large-scale gene duplication events. Members of the BrrLBD family were divided into 7 subclades (class I a to e, class II a and b). Analysis of gene structure and conserved domains revealed that most BrrLBD genes of the same subclade had similar gene structures and protein motifs. The expression profiles of 59 BrrLBD genes were determined through Quantitative Real-time fluorescent PCR (qRT-PCR). Most BrrLBD genes in the same subclade had similar gene expression profiles. However, the expression patterns of 7 genes differed from their duplicates, indicating that although the gene function of most BrrLBD genes has been conserved, some BrrLBD genes may have undergone evolutionary change.

Direct Labeling of Protein Nanoparticles with Fluorescent Compounds for Immunoassay Applications.

A fusion protein, designated ELP-D-C, comprised of a hydrophobic elastin-like polypeptide unit, a hydrophilic aspartic acid-rich peptide unit, and an antibody-binding domain as a functional unit, was constructed. Upon heat induction, ELP-D-C forms micellar nanoparticles displaying antibody-binding domains on their surfaces. The protein nanoparticles were able to incorporate hydrophobic fluorescent compounds and subsequently detect target molecules via antibody binding by the resulting fluorescence intensity, which was proportional to the log of the concentration of the target molecule.

Self-Assembly and Stabilization of Hybrid Cowpea Chlorotic Mottle Virus Particles under Nearly Physiological Conditions.

Capsids of the cowpea chlorotic mottle virus (CCMV) hold great promise for use as nanocarriers in vivo. A major drawback, however, is the lack of stability of the empty wild-type virus particles under physiological conditions. Herein, the assembly behavior and stability under nearly physiological conditions of protein-based block copolymers composed of the CCMV capsid protein and two hydrophobic elastin-like polypeptides are reported. UV/Vis spectroscopy studies, dynamic light-scattering analysis, and TEM measurements demonstrate that both hybrid variants form stable capsids at pH 7.5, physiological NaCl concentration, and 37 °C. The more hydrophobic variant also remains stable in a cell culture medium. These engineered, hybrid CCMV capsid particles can therefore be regarded as suitable candidates for in vivo applications.

PUX10 Is a Lipid Droplet-Localized Scaffold Protein That Interacts with CELL DIVISION CYCLE48 and Is Involved in the Degradation of Lipid Droplet Proteins.

The number of known proteins associated with plant lipid droplets (LDs) is small compared with other organelles. Many aspects of LD biosynthesis and degradation are unknown, and identifying and characterizing candidate LD proteins could help elucidate these processes. Here, we analyzed the proteome of LD-enriched fractions isolated from tobacco (Nicotiana tabacum) pollen tubes. Proteins that were highly enriched in comparison with the total or cytosolic fraction were further tested for LD localization via transient expression in pollen tubes. One of these proteins, PLANT UBX DOMAIN-CONTAINING PROTEIN10 (PUX10), is a member of the plant UBX domain-containing (PUX) protein family. This protein localizes to LDs via a unique hydrophobic polypeptide sequence and can recruit the AAA-type ATPase CELL DIVISION CYCLE48 (CDC48) protein via its UBX domain. PUX10 is conserved in Arabidopsis thaliana and expressed in embryos, pollen tubes, and seedlings. In pux10 knockout mutants in Arabidopsis, LD size is significantly increased. Proteomic analysis of pux10 mutants revealed a delayed degradation of known LD proteins, some of which possessed ubiquitination sites. We propose that PUX10 is involved in a protein degradation pathway at LDs, mediating an interaction between polyubiquitinated proteins targeted for degradation and downstream effectors such as CDC48.

An ungrouped cuticular protein is essential for normal endocuticle formation in the brown planthopper

Using transcriptome analysis of tissues of the brown planthopper (BPH), Nilaparvata lugens, we identified a gene tentatively designated NlCP21.92 that was expressed at high levels in the integument. Spatiotemporal expression profiling with quantitative PCR and Western blotting verified its integument-specific expression and showed periodic expression during molting. The open reading frame was GC-rich and encoded a hydrophobic polypeptide. The polypeptide contained AAPA/V repeat motifs and other sequence features similar to several reported cuticular proteins but lacked an R&R consensus and other chitin-binding domains. Double-stranded RNA–mediated RNA interference of the NlCP21.92 resulted in abnormal and lethal morphological phenotypes, and transmission electron microscopy revealed the corresponding ultrastructural defects. Immunohistochemical staining demonstrated that the NlCP21.92 protein was primarily located in the procuticle. Our results suggest that NlCP21.92 is a novel ungrouped cuticular protein essential for normal endocuticle formation.

Effect of Hydrophobic Polypeptide Length on Performances of Thermo-Sensitive Hydrogels.

Thermosensitive gels are commonly used as drug carriers in medical fields, mainly due to their convenient processing and easy functionalization. However, their overall performance has been severely affected by their unsatisfying biocompatibility and biodegradability. To this end, we synthesized poly(l-alanine) (PLAla)-based thermosensitive hydrogels with different degrees of polymerization by ring-opening polymerization. The obtained mPEG45−PLAla copolymers showed distinct transition temperatures and degradation abilities. It was found that slight changes in the length of hydrophobic side groups had a decisive effect on the gelation behavior of the polypeptide hydrogel. Longer hydrophobic ends led to a lower gelation temperature of gel at the same concentration, which implied better gelation capability. The hydrogels showed rapid gelling, enhanced biocompatibility, and better degradability. Therefore, this thermosensitive hydrogel is a promising material for biomedical application.

Fluoroalcohol – Induced coacervates for selective enrichment and extraction of hydrophobic proteins

As previously reported, fluoroalcohols can induce coacervation in aqueous solutions of amphiphilic compounds with subsequent formation of two-phase systems, where one phase is enriched in amphiphile and fluoroalcohol and the other is primarily an aqueous – rich phase. This study focuses on the use of simple coacervates made of a single component amphiphile induced by a fluoroalcohol for extraction and enrichment of proteins. 1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) and 2,2,2-trifluoroethanol (TFE) were used to induce coacervation in the aqueous solutions of a cationic amphiphile, cetyltrimethylammonium bromide (CTAB) or tetra-n-butylammonium bromide (TBAB). Cationic amphiphiles (CTAB, TBAB) formed two-phase coacervate systems in a basic pH and/or sufficient ionic strength depending on the strength of coacervator (HFIP or TFE). The phase diagrams for TBAB paired with HFIP or TFE coacervates were created. By increasing the concentration of coacervator (HFIP or TFE) at a constant surfactant concentration, transition from a single liquid phase to a two or multiple phase mixture, and then eventually to a single liquid phase was observed. TBAB/HFIP mixture without additives showed a unique three-phase system before transitioning to a two-phase system upon increasing HFIP concentration. However, salt addition eliminated this three-phase region and expanded the region of two-phase formation. Select two-phase systems composed of TBAB and a perfluoroalcohol (HFIP or TFE) were utilized to extract model proteins of ranging hydrophobicity. All coacervate phases extracted bacteriorhodopsin, a membrane protein, and gramicidin, a very hydrophobic polypeptide ion channel. The most hydrophilic protein in the mixture, ribonuclease A, remained in aqueous phases. The coacervates formed from TBAB/TFE/200 mM NaCl mixture and TBAB/HFIP mixture exhibited the most selectivity in extracting proteins of high hydrophobicity. The partition coefficient (P) for each protein was calculated using the ratio of the protein concentration in the coacervate to that in the aqueous-rich phases. TBAB (50 mM)/HFIP (8%, v/v) coacervate showed remarkable selectivity and a high partition coefficient (>100) for both bacteriorhodopsin and gramicidin. Thus, this system may potentially be beneficial for facile fractionation of hydrophobic and membrane proteins in proteomics applications.

Compositional differences between Copaxone and Glatopa are reflected in altered immunomodulation ex vivo in a mouse model.

Copaxone (glatiramer acetate, GA), a structurally and compositionally complex polypeptide nonbiological drug, is an effective treatment for multiple sclerosis, with a well-established favorable safety profile. The short antigenic polypeptide sequences comprising therapeutically active epitopes in GA cannot be deciphered with state-of-the-art methods; and GA has no measurable pharmacokinetic profile and no validated pharmacodynamic markers. The study reported herein describes the use of orthogonal standard and high-resolution physicochemical and biological tests to characterize GA and a U.S. Food and Drug Administration-approved generic version of GA, Glatopa (USA-FoGA). While similarities were observed with low-resolution or destructive tests, differences between GA and USA-FoGA were measured with high-resolution methods applied to an intact mixture, including variations in surface charge and a unique, high-molecular-weight, hydrophobic polypeptide population observed only in some USA-FoGA lots. Consistent with published reports that modifications in physicochemical attributes alter immune-related processes, genome-wide expression profiles of ex vivo activated splenocytes from mice immunized with either GA or USA-FoGA showed that 7-11% of modulated genes were differentially expressed and enriched for immune-related pathways. Thus, differences between USA-FoGA and GA may include variations in antigenic epitopes that differentially activate immune responses. We propose that the assays reported herein should be considered during the regulatory assessment process for nonbiological complex drugs such as GA.

Biodegradable Micelles Based on Poly(ethylene glycol)-b-polylipopeptide Copolymer: A Robust and Versatile Nanoplatform for Anticancer Drug Delivery.

Poly(ethylene glycol)-b-polypeptide block copolymer micelles, with excellent safety, are one of the most clinically studied nanocarriers for anticancer drug delivery. Notably, self-assembled nanosystems based on hydrophobic polypeptides showing typically a low drug loading and burst drug release are limited to preclinical studies. Here, we report that poly(ethylene glycol)-b-poly(α-aminopalmitic acid) (PEG-b-PAPA) block copolymer could be easily prepared with tailored Mn through ring-opening polymerization of α-aminopalmitic acid N-carboxyanhydride (APA-NCA). Interestingly, PEG-b-PAPA copolymers exhibited superb solubility in common organic solvents (including CHCl3, CH2Cl2, and THF), while stable nanomicelles were formed in phosphate buffer, with a small size of 59 nm and a low critical micelle concentration of 2.38 mg/L. These polylipopeptide micelles (Lipep-Ms) allowed facile loading of a potent anticancer drug, docetaxel (DTX), likely due to the existence of a strong interaction between the lipophilic drug and polylipopeptide in the core. Notably, cRGD-peptide-functionalized Lipep-Ms (cRGD-Lipep-Ms) were also obtained with similar biophysical characteristics. The in vitro studies showed efficient cellular uptake of DTX-loaded cRGD-Lipep-Ms by B16F10 cells and fast intracellular drug release due to the enzymatic degradation of PAPA blocks in endo/lysosome, leading to a pronounced anticancer effect (IC50 = 0.15 μg DTX equiv/mL). The in vivo therapy studies showed that DTX-cRGD-Lipep-Ms exhibited superior tumor growth inhibition of B16F10 melanoma, improved survival rate, and little side effects as compared to free DTX. These polylipopeptide micelles appear as a promising and robust nanoplatform for anticancer drug delivery.

Micellar Self-Assembly of Recombinant Resilin-/Elastin-Like Block Copolypeptides.

Reported here is the synthesis of perfectly sequence defined, monodisperse diblock copolypeptides of hydrophilic elastin-like and hydrophobic resilin-like polypeptide blocks and characterization of their self-assembly as a function of structural parameters by light scattering, cryo-TEM, and small-angle neutron scattering. A subset of these diblock copolypeptides exhibit lower critical solution temperature and upper critical solution temperature phase behavior and self-assemble into spherical or cylindrical micelles. Their morphologies are dictated by their chain length, degree of hydrophilicity, and hydrophilic weight fraction of the ELP block. We find that (1) independent of the length of the corona-forming ELP block there is a minimum threshold in the length of the RLP block below which self-assembly does not occur, but that once that threshold is crossed, (2) the RLP block length is a unique molecular parameter to independently tune self-assembly and (3) increasing the hydrophobicity of the corona-forming ELP drives a transition from spherical to cylindrical morphology. Unlike the self-assembly of purely ELP-based block copolymers, the self-assembly of RLP-ELPs can be understood by simple principles of polymer physics relating hydrophilic weight fraction and polymer-polymer and polymer-solvent interactions to micellar morphology, which is important as it provides a route for the de novo design of desired nanoscale morphologies from first principles.

Adsorption of a hydrophobic cationic polypeptide onto acidic lipid membrane

We study the interactions between a cationic polypeptide chain with tunable hydrophobicity and a fluid phosphatidyl-choline lipid monolayer composed of neutral, tetravalent phosphatidylinositol 4, 5-bisphosphate and univalent phosphatidylserine acidic lipids at various ionic concentrations of the salt solution, using a simple coarse-grained Monte Carlo model. Our work illustrates that the enhancement in the polypeptide hydrophobicity strengthens the short-range attractions between monomers, which elevates the electrostatic energy gain of the polypeptide/membrane complexity, but enlarges the conformational entropy loss of the shrunken polypeptide and demixing entropy loss of the segregated acidic lipids. These energy-entropy competitions result in qualitatively different dependences of anchoring/dissociation transition critical ionic concentration on hydrophobic monomer-monomer energy parameter εh for polypeptides with short and long chain lengths. In the anchoring region, we show that changing the polypeptide hydrophobicity leads to diverse chain conformations at various ionic concentrations for polypeptides with both short and long chain lengths. Furthermore, we illustrate the non-trivial feature of the reorganization of the acidic lipids underneath the anchored polypeptides. Our work demonstrates that the chain conformations of the anchored polypeptides with different hydrophobicities can be a key factor influencing the amounts and concentration gradients of the segregated acidic lipids. These findings suggest that polypeptide hydrophobicity provides an efficient molecular factor for tailoring the anchoring/association transition and interfacial structures of the polypeptide/membrane complexities, thereby offering insight into the innovation of new biotechnologies based on the functional switch of the anchored biopolymers and the regulation of messenger lipids.

Effect of noncovalent interaction on the self-assembly of a designed peptide and its potential use as a carrier for controlled bFGF release.

Peptide self-assembly is one of the promising bottom-up approaches for creating synthetic supermolecular architectures. Noncovalent interactions such as hydrophobic packing, electrostatic interaction, and polypeptide chain entropy (ΔSC) are the most relevant factors that affect the folding and self-assembly of peptides and the stability of supermolecular structures. The GVGV tetrapeptide is an abundant repeat in elastin, an extracellular matrix protein. In this study, four GVGV-containing peptides were designed with the aim of understanding the effects of these weak interactions on peptide self-assembly. Transmission electron microscopy, circular dichroism spectroscopy, dynamic light scattering measurements, and rheometry assays were used to study the structural features of the peptides. Because self-assembling peptides with different amino acid sequences may significantly affect protein release, basic fibroblast growth factor (bFGF) was used as a model molecule and encapsulated within the P2 (RLDLGVGVRLDLGVGV) hydrogel to study the release kinetics. The results showed that the balance among hydrophobic effects, electrostatic interactions, and chain entropy determined the molecular state and self-assembly of the peptide. Moreover, encapsulation of bFGF within the P2 hydrogel allowed its sustained release without causing changes in the secondary structure. The release profiles could be tuned by adjusting the P2 hydrogel concentration. Cell Counting Kit-8 and Western blot assays demonstrated that the encapsulated and released bFGFs were biologically active and capable of promoting the proliferation of murine fibroblast NIH-3T3 cells, most likely due to the activation of downstream signaling pathways.

Mechanism of the Spontaneous and Directional Membrane Insertion of a 2-Transmembrane Ion Channel.

Protein insertion into membranes is a process occurring in every cell and every cellular compartment. Yet, many thermodynamic aspects of this fundamental biophysical process are not well understood. We investigated physicochemical parameters that influence protein insertion using the model protein KcsA, a 2-transmembrane ion channel. To understand what drives insertion and to identify individual steps of protein integration into a highly apolar environment, we investigated the contribution of electrostatic interactions and lipid composition on protein insertion on a single molecule level. We show that insertion of KcsA is spontaneous and directional as the cytosolic part of the protein does not translocate across the membrane barrier. Surprisingly, not hydrophobic residues but charged amino acids are crucial for the insertion of the unfolded protein into the membrane. Our results demonstrate the importance of electrostatic interactions between membrane and protein during the insertion process of hydrophobic polypeptides into the apolar membrane. On the basis of the observation that negatively charged lipids increase insertion events while high ionic strength in the surrounding aqueous phase decreases insertion events, a two-step mechanism is proposed. Here, an initial electrostatic attraction between membrane and protein represents the first step prior to insertion of hydrophobic residues into the hydrocarbon core of the membrane.

Aqueous Self-Assembly of a Protein-Mimetic Ampholytic Block Copolypeptide

This report describes the aggregation behavior of an ABC-type ampholytic block copolypeptide, poly(ethylene oxide)-block-poly(l-lysine)-block-poly(l-glutamate), in aqueous media in dependence of pH. Polypeptide secondary structures and self-assemblies are investigated by circular dichroism (CD), Fourier transform infrared (FT-IR) and NMR spectroscopy, zeta potential measurements, analytical ultracentrifugation (AUC), dynamic/static light scattering (DLS/SLS), and cryogenic transmission electron microscopy (cryo-TEM). The polymer chains tend to form vesicles when the hydrophobic polypeptide helix is located at the chain end (acidic pH) and are existing as single chains when it is located in the center and flanked by the two hydrophilic segments (basic pH). Precipitation occurs in the intermediate pH range due to polyion complexation of the charged polypeptide segments.

Crystal structure of a substrate-engaged SecY protein-translocation channel

Hydrophobic signal sequences target secretory polypeptides to a protein-conducting channel formed by a heterotrimeric membrane protein complex, the prokaryotic SecY or eukaryotic Sec61 complex. How signal sequences are recognized is poorly understood, particularly because they are diverse in sequence and length. Structures of the inactive channel show that the largest subunit, SecY or Sec61α, consists of two halves that form an hourglass-shaped pore with a constriction in the middle of the membrane and a lateral gate that faces lipid1-10. The cytoplasmic funnel is empty, while the extracellular funnel is filled with a plug domain. In bacteria, the SecY channel associates with the translating ribosome in co-translational translocation, and with the SecA ATPase in post-translational translocation 11. How a translocating polypeptide inserts into the channel is uncertain, as cryo-EM structures of the active channel have a relatively low resolution (~10Å) or are of insufficient quality 6-8. Here we report a crystal structure of the active channel, assembled from SecY complex, the SecA ATPase, and a segment of a secretory protein fused into SecA. The translocating protein segment inserts into the channel as a loop, displacing the plug domain. The hydrophobic core of the signal sequence forms a helix that sits in a groove outside the lateral gate, while the following polypeptide segment intercalates into the gate. The C-terminal section of the polypeptide loop is located in the channel, surrounded by residues of the pore ring. Thus, during translocation, the hydrophobic segments of signal sequences, and probably bilayer-spanning domains of nascent membrane proteins, exit the lateral gate and dock at a specific site that faces the lipid phase.

Membrane topologies of the PGLa antimicrobial peptide and a transmembrane anchor sequence by Dynamic Nuclear Polarization/solid-state NMR spectroscopy.

Dynamic Nuclear Polarization (DNP) has been introduced to overcome the sensitivity limitations of nuclear magnetic resonance (NMR) spectroscopy also of supported lipid bilayers. When investigated by solid-state NMR techniques the approach typically involves doping the samples with biradicals and their investigation at cryo-temperatures. Here we investigated the effects of temperature and membrane hydration on the topology of amphipathic and hydrophobic membrane polypeptides. Although the antimicrobial PGLa peptide in dimyristoyl phospholipids is particularly sensitive to topological alterations, the DNP conditions represent well its membrane alignment also found in bacterial lipids at ambient temperature. With a novel membrane-anchored biradical and purpose-built hardware a 17-fold enhancement in NMR signal intensity is obtained by DNP which is one of the best obtained for a truly static matrix-free system. Furthermore, a membrane anchor sequence encompassing 19 hydrophobic amino acid residues was investigated. Although at cryotemperatures the transmembrane domain adjusts it membrane tilt angle by about 10 degrees, the temperature dependence of two-dimensional separated field spectra show that freezing the motions can have beneficial effects for the structural analysis of this sequence.

Design and Engineering of Nanopores with Emergent Functions

Engineering new functions into existing assemblies is a first step to build artificial biological systems. Further, the emergence of an enzymatic function can reveal functional insights and allows engineering biological systems with enhanced properties. Biological nanopores with known structure are ideal building elements for this task because they have a robust assembly that allows precise engineering. For example, we recently incorporated DNA molecules atop a ClyA nanopore to build artificial transporters that are able to selectively shuttle DNA or proteins across a lipid membrane. Nanopores have additional advantages, as the ionic flux through the nanopore can be exploited to recognize molecules or study biological and chemical processes at the single-molecule level.Here we engineered an alpha hemolysin nanopore to operate as GroES, a co-chaperonin that in complex with GroEL forms a two-stroke protein-folding nanomachine. The new function was introduced bottom-up by adding modular elements into an unrelated globular structure, suggesting a possible path during GroEL-GroES evolution in which the co-chaperonin function appeared sequentially by incorporating hydrophobic polypeptide loops into pre-existing protein assemblies. The binding of GroEL to individual GroES-nanopores prompted large changes to the unitary nanopore current, most likely reflecting the allosteric transitions of the chaperonin nanomachine. In the presence of unfolded proteins the pattern of current transitions changed, suggesting a possible mechanism in which the free energy of ATP binding and hydrolysis is expended only when substrate proteins are occupied.

Recombinant production and purification of short hydrophobic Elastin-like polypeptides with low transition temperatures

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. We report herein the recombinant expression of three hydrophobic ELPs (VPGIG)n with variable lengths (n = 20, 40, 60) and sub-ambient transition temperatures. These ELPs were purified from the cytoplasmic soluble fraction of Escherichia coli by inverse transition cycling, and their exact molecular weight was confirmed by various mass spectrometry techniques. Transition temperatures of ELP20, ELP40, and ELP60 were measured at 18.6 °C, 12.4 °C and 11.7 °C, respectively.