Hydrogen Radicals Research Articles

Brookite TiO2 as an active photocatalyst for photoconversion of plastic wastes to acetic acid and simultaneous hydrogen production: Comparison with anatase and rutile

Photoreforming is a clean photocatalytic technology for simultaneous plastic waste degradation and hydrogen fuel production, but there are still limited active and stable catalysts for this process. This work introduces the brookite polymorph of TiO2 as an active photocatalyst for photoreforming with an activity higher than anatase and rutile polymorphs for both hydrogen production and plastic degradation. Commercial brookite successfully converts polyethylene terephthalate (PET) plastic to acetic acid under light. The high activity of brookite is attributed to good charge separation, slow decay and moderate electron trap energy, which lead to a higher generation of hydrogen and hydroxyl radicals and accordingly enhanced photo-oxidation of PET plastic. These results introduce brookite as a stable and active catalyst for the photoconversion of water contaminated with microplastics to value-added organic compounds and hydrogen.

Influence of Hydroxyl Groups on the Oxidative Reaction Characteristics of Active Groups in Lignite at Room Temperature.

In this paper, through the Fourier infrared spectrum analysis of the Inner Mongolia Hulunbeier Yannan coal mine lignite sample, phenyl and active groups, methoxy (-OCH3) and methylene (-CH2-), were taken as the research objects, and a simple small molecule model of hydroxyl (-OH) at the ortho, meta, and para positions of active groups was constructed. The structural optimization and simulation calculation of simple small molecules were carried out by Gaussview 6.0.16 and Gaussian 16 software at room temperature and pressure. The DFT-B3LYP method and 6-311G(d,p) basis set were used to study the effect of the -OH position on the oxidation reaction characteristics from various aspects of electrostatic potential, frontier orbital, activation energy, enthalpy change, and Gibbs free energy change. The results show that the coexistence of the active groups -OCH3 and -CH2- with -OH makes the small molecule model add an active site, that is, the oxygen atom in -OH, which makes the active groups generate hydrogen radicals (H•). Comparing different positions of -OH, the analysis shows that -OH at the ortho position has a vital impact on the oxidation reaction, and the oxidation reaction releases the largest amount of heat and has the fastest occurrence rate, making it easier to overcome energy barriers and making the reaction easier to proceed. The purpose of this study is to reveal the interaction and complex reaction path of lignite through an in-depth study of its properties, structural composition, and reaction behavior and to accurately grasp its chemical composition, thermal properties, and microstructure, so as to lay a foundation for further efficient conversion and comprehensive utilization.

Nitrogen-doped carbon supported iron nanoparticles for mild catalytic hydrocracking of Xilinguole lignite

Cleaving C-O bridged bonds of lignite via catalytic hydrocracking (CHC) is an effective method to produce chemicals and clean fuels. Herein, a nitrogen-doped carbon supported Fe catalyst was developed by using a one-pot method for CHC of Xilinguole lignite (XL) and its related model compounds. The doped nitrogen enhanced the interaction between Fe and N species to form Fe-N sites and favored forming smaller Fe/Fe3C nanocrystals, which played a crucial role in CHC performance. Toluene and phenol were produced from CHC of benzyl phenyl ether (BPE) with high yield and selectivity at 250 °C over the optimal catalyst with 4% Fe, without hydrogenation products. The Fe-based catalyst activated both H2 and isopropanol to generate hydrogen radicals for cleaving C-O bridged bonds. The CHC of XL under different temperature and time showed that the yields of oil, asphaltene and preasphaltene were obviously promoted under 325 °C, 1 MPa, and 6 h, and they had much higher H/C ratio but remarkably lower O/C ratio, resulting in much higher heating values (28.19–36.90 MJ/kg) than XL. Phenols were the major group component with relative content of 53.6 wt% in oil from CHC, and the asphaltene and preasphaltene from CHC had obviously lower molecular weights, which could attributed to depolymerization of C-O bridged bonds in the XL macromolecular structures over the catalyst.

An ONIOM-Based High-Level Thermochemistry Study on Hydrogen Abstraction Reactions of Large Straight-Chain Alkanes by Hydrogen, Hydroxyl, and Hydroperoxyl Radicals

Accurate thermochemical data are of great importance in developing quantitatively predictive reaction mechanisms for transportation fuels, such as diesel and jet fuels, which are primarily composed of large hydrocarbon molecules, especially large straight-chain alkanes containing more than 10 carbon atoms. This paper presents an ONIOM[QCISD(T)/CBS:DFT]-based theoretical thermochemistry study on the hydrogen abstraction reactions of straight-chain alkanes, n-CnH2n+2, (n = 1–16) by hydrogen (H), hydroxyl (OH), and hydroperoxyl (HO2) radicals. These reactions, with n ≥ 10, pose significant computational challenges for prevalent high-level ab initio methods. However, they are effectively addressed using the ONIOM-based method. One notable aspect of this study is the consideration of the high symmetry of straight-chain alkanes. This symmetry allows us to study half of the reactions, employing a generalized approach. Therefore, a total of 216 reactions are systematically studied for the three reaction systems. Our results align very well with those from the widely accepted high-level QCISD(T)/CBS method, with discrepancies between the two generally less than 0.10 kcal/mol. Furthermore, we compared large straight-chain alkanes (n-C16H34 and n-C18H38) with large methyl ester molecules (C15H31COOCH3 and C17H33COOCH3) to elucidate the impact of functional groups (ester group and C=C double bond) on the reactivity of the long-chain structure. These findings underscore the accuracy and efficiency of the ONIOM-based method in computational thermochemistry, particularly for large straight-chain hydrocarbons in transportation fuels.

Evaluation of the Antioxidant, Cytotoxicity, Antibacterial, Anti-Motility, and Anti-Biofilm Effects of Myrothamnus flabellifolius Welw. Leaves and Stem Defatted Subfractions.

The formation of biofilms underscores the challenge of treating bacterial infections. The study aimed to assess the antioxidant, cytotoxicity, antibacterial, anti-motility, and anti-biofilm effects of defatted fractions from Myrothamnus flabellifolius (resurrection plant). Antioxidant activity was assessed using DPPH radical scavenging and hydrogen peroxide assays. Cytotoxicity was screened using a brine shrimp lethality assay. Antibacterial activity was determined using the micro-dilution and growth curve assays. Antibiofilm potential was screened using the crystal violet and tetrazolium reduction assay. Liquid-liquid extraction of crude extracts concentrated polyphenols in the ethyl acetate and n-butanol fractions. Subsequently, these fractions had notable antioxidant activity and demonstrated broad-spectrum antibacterial activity against selected Gram-negative and Gram-positive bacteria and Mycobacterium smegmatis (MIC values < 630 μg/mL). Growth curves showed that the bacteriostatic inhibition by the ethyl acetate fractions was through the extension of the lag phase and/or suppression of the growth rate. The sub-inhibitory concentrations of the ethyl acetate fractions inhibited the swarming motility of Pseudomonas aeruginosa and Klebsiella pneumoniae by 100% and eradicated more than 50% of P. aeruginosa biofilm biomass. The polyphenolic content of M. flabellifolius plays an important role in its antibacterial, anti-motility, and antibiofilm activity, thus offering an additional strategy to treat biofilm-associated infections.

Insight into the synergistic effect on thermal behavior in co-pyrolysis of coal slime and sewage sludge: Kinetics, thermodynamics, dendrite neural network modelling, and evolved char structure

Co-pyrolysis of coal slime (CS) and sewage sludge (SS) is a promising technology to achieve waste reduction and recovery of value-added products. For the first time, pyrolysis behavior, kinetics, thermodynamics, dendrite neural network modelling, and evolved char structure were examined in the co-pyrolysis of CS and SS. The results showed that blending CS and SS at a weight ratio of 6:4 yielded a higher synergy in relation to the obtained kinetic and thermodynamic parameters. At lower temperatures, the active hydroxyl radicals released from SS pyrolyzed volatiles accelerate the dehydrogenation reactions of CS. The interaction between oxygen radicals, such as ether bonds in SS volatiles, and aromatics or hydrocarbon compounds in CS char increases the content of oxygenated compounds in the pyrolytic char by significantly enhancing its reactivity. As the temperature rises, the demethylation reaction of aliphatic hydrocarbons in SS volatiles generates a considerable amount of hydrogen radicals. This intensifies the formation of small-ring aromatic compounds during co-pyrolysis, further facilitating the condensation of small-ring aromatics into larger-ring aromatics at higher temperatures. In addition, a novel dendrite neural network model was successfully applied to predict the co-pyrolysis behavior of CS and SS, whereby the transfer function of interaction was obtained.

Graphitic Armor: A Natural Molecular Sieve for Robust Hydrogen Electroxidation.

Carbon coating layers have been found to improve the catalytic performance of transition metals, which is usually explained as an outcome of electronic synergistic effect. Herein we reveal that the defective graphitic carbon, with a unique interlayer gap of 0.342 nm, can be a highly selective natural molecular sieve. It allows efficient diffusion of hydrogen molecules or radicals both along the in-plane and out-of-plane direction, but sterically hinders the diffusion of molecules with larger kinetic diameter (e.g., CO and O2) along the in-plane direction. As a result, poisonous species lager than 0.342 nm are sieved out, even when their adsorption on the metal is thermodynamically strong; at the same time, the interaction between H2 and the metal is not affected. This natural molecular sieve provides a very chance for constructing robust metal catalysts for hydrogen-relevant processes, which are more tolerant to chemical or electrochemical oxidation or CO-relevant poisoning.

Graphitic Armor: A Natural Molecular Sieve for Robust Hydrogen Electroxidation

AbstractCarbon coating layers have been found to improve the catalytic performance of transition metals, which is usually explained as an outcome of electronic synergistic effect. Herein we reveal that the defective graphitic carbon, with a unique interlayer gap of 0.342 nm, can be a highly selective natural molecular sieve. It allows efficient diffusion of hydrogen molecules or radicals both along the in‐plane and out‐of‐plane direction, but sterically hinders the diffusion of molecules with larger kinetic diameter (e.g., CO and O2) along the in‐plane direction. As a result, poisonous species lager than 0.342 nm are sieved out, even when their adsorption on the metal is thermodynamically strong; at the same time, the interaction between H2 and the metal is not affected. This natural molecular sieve provides a very chance for constructing robust metal catalysts for hydrogen‐relevant processes, which are more tolerant to chemical or electrochemical oxidation or CO‐relevant poisoning.

Mechanical agitation and ultrasound constructed in situ Fenton system: The role of atomic hydrogen for Fe(III) reduction

It has been reported that the ultrasonic agitation coupled system (US/A) has higher oxidation efficiency than the pure ultrasonic system (US), and the atomic hydrogen (H) and hydroxyl radicals (OH) produced by H2O cracking and in situ hydrogen peroxide (H2O2) can be significantly detected. In order to utilize the residual H2O2 and explore the role and fate of H, US/A/Fe(III) as an in situ Fenton oxidation system, was constructed in this study. The experimental results proved that the system can generate H2O2in situ, and adding Fe(III) could significantly promote the oxidation of refractory organic pollutants. Quenching tests, probes experiments and EPR test were performed to successfully monitor the existence of OH. The contribution of H to Fe(III) reduction was speculated and confirmed. In addition, the kinetic model showed the decomposition rate of water molecule and the reduction rate of Fe(III) by H under different ultrasonic power. The effects of the factors (pH, coexisting substance, and actual water environment) on degrading organic pollutants were evaluated. Therefore, this work provides new strategy and mechanistic insight into in situ Fenton technique by coupling ultrasonic agitation and Fe(III) without external oxidants.

First-principles investigation of hydrogen-related reactions on (100)–(2 × 1)[formula omitted]H diamond surfaces

Hydrogen radical attacks and subsequent hydrogen migrations are considered to play an important role in the atomic-scale mechanisms of diamond chemical vapour deposition growth. We perform a comprehensive analysis of the reactions involving H-radical and vacancies on H-passivated diamond surfaces exposed to hydrogen radical-rich atmosphere. By means of first principles calculations—density functional theory and climbing image nudged elastic band method—transition states related to these mechanisms are identified and characterised. In addition, accurate reaction rates are computed using variational transition state theory. Together, these methods provide—for a broad range of temperatures and hydrogen radical concentrations—a picture of the relative likelihood of the migration or radical attack processes, along with a statistical description of the hydrogen coverage fraction of the (100) H-passivated surface, refining earlier results via a more thorough analysis of the processes at stake. Additionally, the migration of H-vacancy is shown to be anisotropic, and occurring preferentially across the dimer rows of the reconstructed surface. The approach used in this work can be generalised to other crystallographic orientations of diamond surfaces or other semiconductors.

Synergism of electrostatic attraction and tandem catalytic effect enabled efficient electrosynthesis of ammonia from a wide-range of nitrate concentrations

Electrochemical reduction of nitrate to ammonia provides a promising route to sustainable ammonia synthesis under mild conditions. Herein, we reported a metal–organic framework-derived CuCo bimetallic nanoparticles/nitrogen-doped carbon (CuCo/CN) composite electrocatalyst for nitrate-to-ammonia conversion. Strong interface coupling between CuCo nanoparticles and CN matrix enables enhanced electrostatic attraction effect and availably triggers accumulation of nitrate at electrocatalyst surfaces. Moreover, the incorporated Co site could effectively supply hydrogen radical in favor of achieving dynamic equilibrium of active hydrogen. Owing to these unique properties, the CuCo/CN electrocatalyst achieved an unprecedented ammonia Faradaic efficiency (>84 %) across a wide range of nitrate concentrations from 20 to 2000 ppm, with an optimal Faradaic efficiency of 93.56 % at 200 ppm. Excitingly, coupling nitrate reduction reaction to methanol oxidation reaction (by replacing sluggish oxygen evolution reaction) could further reduce total electrolytic voltage of conventional nitrate-to-ammonia system, and produce value-added chemicals on both sides of the electrolyzer.

Key Role of Cations in Stabilizing Hydrogen Radicals for CO2-to-CO Conversion via a Reverse Water-Gas Shift Reaction.

Electrochemically converting CO2 into valuable chemicals and fuels in acidic media is argued as a promising energy- and carbon-efficient route. Although several key roles of alkali cations have been unveiled, the alkali cation trends for CO2 reduction remain largely elusive. With decreasing cation size from Cs+ to Li+, here we show that the apparent proton diffusion coefficient in 3.0 M Li+ is tens-fold lower than in 3.0 M K+ and 3.0 M Cs+ acidic electrolytes. Although Li+ has the strongest inhibition ability for proton transport, it acts the worst for both the CO2-to-CO conversion and partial current density on Au catalysts. Unexpectedly, K+ with a higher proton transport performs the best for CO2-to-CO conversion. We thus revisit the roles of alkali cations and find that hydrated K+ can stabilize hydrogen radicals benefiting CO2 conversion at the electrode interface while for Li+ this is not the case. This study proposes that cation-stabilized atomic hydrogen assists in activating CO2 via a reverse water-gas shift route under electrochemical conditions.

Revealing the Hidden Role of Radical Scavengers: Unraveling the Key to Tailoring the Formation of the hcp PdHx Phase in Graphene Liquid Cells

AbstractRadiation chemistry enables the synthesis of colloidal nanoparticles without chemical reducing agents, yielding metal nanoparticles via simple and direct processes. Aliphatic alcohols are widely used to promote the formation of nanoparticles in radiolytic synthesis by inhibiting the reoxidation of these metal nanoparticles by scavenging hydroxyl radicals. However, the role of the scavenger has been limited to simply accelerating the formation of the nanoparticles without altering their nature. Herein, the role of radical scavengers is investigated in determining the type of metal nanoparticles formed, with the scavenger concentration playing a crucial role. It is found that the addition of isopropyl alcohol controls the formation of hexagonal close‐packed (hcp) palladium hydride (PdHx) nanoparticles that are previously synthesized for the first time via radiation chemistry by increasing the concentrations of hydrated electrons and hydrogen radicals. This discovery reveals a more active role for radical scavengers in radiolytic syntheses, and this strategy can be used for the cost‐effective mass production of hcp PdHx nanoparticles.

A Dual Cobalt and Photoredox Catalysis for Hydrohalogenation of Alkenes.

We demonstrate hydrohalogenation of aliphatic alkenes with collidine·HX salts through dual photoredox/cobalt catalysis. The dual catalysis enables conversion of a proton and a halide anion from collidine·HX salt to a nucleophilic hydrogen radical equivalent and an electrophilic halogen radical equivalent and delivery of them to an alkene moiety. This protocol allows for introduction of fluorine, chlorine, bromine, or iodine atom to alkene, producing highly functionalized alkyl halides.

Metal-Free Catalytic Conversion of Veratryl and Benzyl Alcohols through Nitrogen-Enriched Carbon Nanotubes

Nitrogen-rich carbon nanotubes NCNT700 and NCNT800 were prepared using the chemical vapor deposition method (CVD). The catalysts were characterized via high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analysis. Both the catalysts were found to have an inverted cup-stack-like morphology. The XPS analysis revealed that the catalysts are rich in pyridinic sites with variable amounts of nitrogen on their surface. The NCTN700, with a higher nitrogen content and more pyridinic sites on its surface, was found to be a good catalyst for the oxidation of benzyl and veratryl alcohols into respective aldehydes. It was observed that toluene and 4-methyl veratrole were also produced in this reaction. The amount of toluene produced was as high as 21%, with 99% conversion of benzaldehyde in the presence of NCNTs-700. The mechanistic pathway was revealed through DFT studies, where the unusual product formation of aromatic alkanes such as toluene and 4-methyl veratrole was explained during the reaction. It was astonishing to observe the reduced product in the reaction that proceeds in the forward direction in presence of a peroxide (tert-butyl hydroperoxide, TBHP). During the computational analysis, it was revealed that the reduced product observed in the reaction did not appear to proceed through a direct disproportionation reaction. Rather, the benzyl alcohol (the reactant) used in the reaction may undergo oxidation by releasing the hydrogen radicals. The hydrogen atoms released during the oxidation reaction appear to have been trapped on pyrrolic sites on the surface of catalyst and later transferred to the reactant molecules to produce toluene as a side product.

Tricoordinate Beryllium Radicals and Their Reactivity.

The one-electron reduction of [(CAAC)Be(Dur)Br] (CAAC = cyclic alkyl(amino)carbene, Dur = 2,3,5,6-tetramethylphenyl = duryl) with lithium sand in diethyl ether yields the first neutral, tricoordinate, and moderately stable beryllium radical, [(CAAC)(Et2O)BeDur]• (2-Et2O), which undergoes a facile second one-electron reduction concomitant with the insertion of the beryllium center into the endocyclic C-NCAAC bond and a cyclopropane-forming C-H bond activation of an adjacent methyl group. In situ generation of 2-Et2O and addition of PMe3 yield the stable analogue, [(CAAC)(Me3P)BeDur]• (2-PMe3), which serves as a platform for PMe3-ligand exchange with stronger donors, generating the radicals [(CAAC)LBeDur]• (2-L, L = isocyanides, pyridines, and N-heterocyclic carbenes). X-ray structural analyses show trigonal-planar beryllium centers and strong π backbonding from the metal to the CAAC ligand. The EPR signals of all six isolated [(CAAC)LBeDur]• radicals display significant, albeit small, hyperfine coupling to the 9Be nucleus. DFT calculations show that the spin density is mostly delocalized over the CAAC π framework and, where present, the isocyanide CN moiety, with only a small proportion (3-6%) on the beryllium center. 2-PMe3 proved thermally unstable at 80 °C, first undergoing radical hydrogen abstraction with the solvent, followed by insertion of beryllium into the endocyclic C-NCAAC bond and PMe3 transfer to the former carbene carbon atom. The reactions with diphenyl disulfide and phenyl azide occur at the beryllium center and yield the corresponding Be(II) phenyl sulfide and amino complexes, respectively, the latter concomitant with radical transfer and hydrogen abstraction by the beryllium-bound nitrogen center.

Enhanced mono-aromatics production by the CH4-assisted pyrolysis of microalgae using Zn-based HZSM-5 catalysts

This study presents the catalytic pyrolysis of microalgae, Chlorella vulgaris (C. vulgaris), using pure CH4 and H2-rich gas evolved from CH4 decomposition on three different HZSM-5 catalysts loaded with Zn, Ga, and Pt, aimed specifically at producing high-value mono-aromatics such as benzene, toluene, ethylbenzene, and xylene (BTEX). In comparison with that for the typical inert N2 environment, a pure CH4 environment increased the bio-oil yield from 32.4 wt% to 37.4 wt% probably due to hydrogen and methyl radical insertion in the bio-oil components. Furthermore, the addition of bimetals further increased bio-oil yield. For example, ZnPtHZ led to a bio-oil yield of 47.7 wt% in pure CH4. ZnGaHZ resulted in the maximum BTEX yield (6.68 wt%), which could be explained by CH4 activation, co-aromatization, and hydrodeoxygenation. The BTEX yield could be further increased to 7.62 wt% when pyrolysis was conducted in H2-rich gas evolved from CH4 decomposition over ZnGaHZ, as rates of aromatization and hydrodeoxygenation were relatively high under this condition. This study experimentally validated that the combination of ZnGaHZ and CH4 decomposition synergistically increases BTEX production using C. vulgaris.

Interfacial polymerization mechanisms assisted flame retardancy process of low-flammable electrolytes on lithium anode

Thermal runaway is a hazardous risk, occurring more readily in high-energy–density lithium-ion batteries (LIBs), which leads to a rapid temperature rise and even combustion or explosion when using flammable electrolyte systems. Flame retardants (FRs), such as trimethyl phosphate (TMPa) and triethyl phosphate (TEP), are commonly utilized due to their effective flame suppression, low toxicity, and excellent thermal stability. However, the lack of in-depth understanding of the flame retardancy mechanism and solid electrolyte interphase (SEI) formation process has made the development of functional electrolytes difficult at present. In this study, we clarified the flame retardancy and interfacial reaction mechanisms of low-flammable TMPa localized high-concentration electrolytes (LHCE) using hybrid ab initio and reactive force field (HAIR) schemes. Long-term HAIR simulation reveals that phosphorous radicals produced by the decomposition of TMPa capture carbon radicals, encouraging their polymerization into low-flammable oligomers, while fluorine-containing solvents in the electrolyte capture hydrogen radicals and produce nonflammable hydrofluoric acid (HF). This synergistic flame retardancy mechanism provides essential atomic-level insights for the rational design of high-safety electrolytes in the future.

Synergistically enhancing nitrate reduction into N2 in water by N-doped Pd–Cu biochar bimetallic single-atom electrocatalysis

Noble metal materials have been identified as high efficiency catalysts for electrocatalytic reduction of nitrate, and the synthesis and manufacture of high catalytic activity and environmentally friendly catalysts of activating hydrogen for water purification applications is extremely attractive. In this work, the Pd–Cu single-atom catalysts (Pd–Cu-N-BC) were first prepared by direct growth of Pd–Cu single-atom on bamboo biochar by regulating the concentration of precursors and doping method, and then enhanced electrocatalytic reduction nitrate performance and N2 generation. The results showed that Pd–Cu-N-BC displayed excellent catalytic activity and reusability in electrocatalytic reduction nitrate with a low potential of 0.47 V vs. RHE (@10 mA cm−2). The maximum nitrate removal efficiency and N2 generation could reach about 100% and 72.32% within 180 min, respectively. The density functional theory (DFT) calculations confirmed that Cu atoms could catalyze the electrochemical reduction of nitrate to nitrite, and Pd atoms anchored in the nitrogen-doped biochar (N-BC) lattice could catalyze electrochemical reduction of nitrite to N2 involving the formation of hydrogen radical (H*). The characterization results of XANES showed that electronic synergistic effect between Pd and Cu single atoms significantly promotes the N2 production through hydrogenation while inhibiting the generation of byproducts, leading to significantly enhanced electrocatalytic reduction of nitrate to N2. Finally, Pd–Cu-N-BC was designed as a 3D particle electrode for enhanced electrocatalytic reduction of nitrate, exhibiting excellent stability and reusability, which could be considered as a suitable candidate for applications in the remediation of nitrate contamination.Graphical

Efficient photo-dissociation-induced production of hydrogen radicals using vacuum ultraviolet light from a laser-produced plasma

One of the critical issues in lithography using extreme ultraviolet (EUV) light is tin contamination of the EUV collector mirrors in the tin-based LPP-EUV light source. The contamination can be removed by the reaction of tin atoms with hydrogen radicals producing stannane (SnH4), which is gaseous at the normal temperature. Hydrogen radicals can be produced from hydrogen molecules through photo-dissociation and photo-ionization induced by broadband radiation emitted from the EUV light source. In this work, an efficient production of hydrogen radical using vacuum ultraviolet (VUV) light emitted from laser-produced high-Z plasma is experimentally demonstrated. A two-dimensional radiation hydrodynamic simulation, coupled with photoionization and photo-dissociation cross sections, also shows the efficient hydrogen radical production by increased VUV light emission, as observed in the experiment.