Peroxide Treatment Research Articles

Preservative effect of tea polyphenols and hydrogen peroxide on quality of chilled meat

The aim of this study was to research the effect of different preservatives on quality and shelf life of fresh chilled meat stored at 4 °C for 12 days. This study used tea polyphenols (0.2%) and hydrogen peroxide (1.27 g/L) to treat chilled pork and measured its pH, TVB-N, TBARS, the total viable bacteria count (TVC) and sensory score. The results showed that the treatments with tea polyphenols and hydrogen peroxide significantly (p < 0.05) inhibited the growth of TVC on fresh chilled pork. The TVC of sample treated with tea polyphenols and hydrogen peroxide increased from initial value 3.2 to 6.0 log CFU/g after 10 and 12 days, respectively. It was also found in pH, TVB-N, TBARS and sensory measurement that the tea polyphenols and hydrogen peroxide treatment could extend the storage period of chilled meat as well as hydrogen peroxide was slightly better than tea polyphenols. It could be suggested that both tea polyphenols and hydrogen peroxide treatment has great potential to extend the shelf life of fresh chilled pork.

PFKFB3 ameliorates ischemia-induced neuronal damage by reducing reactive oxygen species and inhibiting nuclear translocation of Cdk5.

The enzyme 6-phosphofructo-2-kinase/fructose-2,6-bisphosphatase (PFKFB) plays an essential role in glycolysis and in the antioxidant pathway associated with glutathione. Therefore, we investigated the effects of PFKFB3 on oxidative and ischemic damage. We synthesized a fusion protein of transactivator of transcription (Tat)-PFKFB3 to facilitate its passage into the intracellular space and examine its effects against oxidative stress induced by hydrogen peroxide (H2O2) treatment and ischemic damage caused by occlusion of the common carotid arteries for 5min in gerbils. The Tat-PFKFB3 protein was efficiently delivered into HT22 cells in a concentration- and time-dependent manner, with higher levels observed 18h after treatment. Furthermore, treatment with 6 µM Tat-PFKFB3 demonstrated intracellular delivery into HT22 cells, as analyzed through immunocytochemical staining. Moreover, it significantly ameliorated the reduction of cell viability induced by 200 µM H2O2 treatment. Tat-PFKFB3 treatment also alleviated H2O2-induced DNA fragmentation and reactive oxygen species formation in HT22 cells. In gerbils, the intraperitoneal administration of 2mg/kg Tat-PFKFB3 efficiently delivered the substance to all hippocampal areas, including the hippocampal CA1 region. This administration significantly mitigated ischemia-induced hyperlocomotion, long-term memory deficits, and ischemic neuronal death in the hippocampal CA1 region after ischemia. Additionally, treatment with 2mg/kg Tat-PFKFB3 significantly ameliorated the translocation of Cdk5 from the cytosol to the nucleus in the hippocampal CA1 region 24h after ischemia, but not in other regions. The treatment also significantly reduced reactive oxygen species formation in the CA1 region. These findings suggest that Tat-PFKFB3 reduces neuronal damage in the hippocampal CA1 region after ischemia through the reduction of Cdk5 signaling and reactive oxygen species formation. Therefore, Tat-PFKFB3 may have potential applications in reducing ischemic damage.

A survey on healthcare professionals’ perspective on the use of benzoyl peroxide cleanser for acne management

Background: Acne vulgaris is a prevalent chronic dermatological condition affecting adolescents and young adults, with significant consequences on quality of life if left untreated. Effective management strategies are crucial to prevent scarring and psychological distress associated with acne. This study investigated the role of cleansers in acne management and explored healthcare professionals' perspectives and practices regarding acne treatment. Methods: An online questionnaire-based study, involving 126 healthcare professionals [HCPs (dermatologists and cosmetologists)] and 459 acne patients was conducted to assess patients’ acne severity, adherence to cleansing regimens, preferred cleansing agents, treatment duration, adjunctive therapies, and the impact of benzoyl peroxide 5% cleanser on acne control and patient satisfaction. Results: The majority of the patients presented with an IGA grade 3 (moderate) acne (48.59%) in the present survey. HCPs rated benzoyl peroxide as the most preferred cleansing agent for acne management in most of their patients (87.33%). Majority of the patients (41.53%) exhibited improvement within 15 days of using the benzoyl peroxide cleanser, highlighting its relatively rapid onset of action. The benzoyl peroxide treatment duration varied for patients, emphasizing the individualized nature of acne treatment. In most of the severe cases (39.87%), HCPs commonly supplemented benzoyl peroxide with topical retinoids, oral antibiotics, oral isotretinoin, or combination therapy. Conclusions: This study emphasizes the effectiveness and preference for benzoyl peroxide-based cleansers among HCPs and patients.

Physico-mechanical characterization and DFT studies of benzoyl peroxide treated water hyacinth reinforced polypropylene composites

The use of eco-friendly natural fiber-reinforced polymer composites is rapidly expanding across diverse sectors. The rapid spread of water hyacinth disrupts aquatic ecosystems by modifying the pH of water and salinity in Bangladesh. This work investigated on the impact of incorporating both untreated and chemically treated water hyacinth fibers into polypropylene (PP). Untreated water hyacinth (UWH) powder was treated with an alkaline solution, producing mercerized water hyacinth (MWH). MWH was further oxidized to yield oxidized water hyacinth (OWH). Analysis of attenuated total reflection-fourier transform infrared (ATR-FTIR) spectra of UWH, MWH and OWH confirmed cellulose modification. The UWH and OWH were taken in varying contents (1, 2.5, 5, 7.5, and 10 wt%) and added to PP to make UWH-PP and OWH-PP composites using compression molding technique. The 1% fiber content OWH-PP composites exhibited enhanced tensile strength, elongation, and impact strength compared to UWH-PP composites. Enhanced mechanical properties in OWH-PP composites suggested that benzoyl peroxide treatment improves interfacial adhesion. Morphological analysis of the OWH-PP composite showed better interfacial bonding between water hyacinth and PP than that of the UWH-PP composite. Thermogravimetric analysis (TGA) depicted the thermal stability of the UWH-PP and OWH-PP composites. The chemical reaction of cellulose monomer was further studied with DFT/B3LYP level of theory using two different basis sets 6-31+G(d, p) and cc-pVTZ. The calculated vibrational spectra of the untreated, mercerized and oxidized cellulose monomer agree well with the ATR-FTIR spectra, confirming chemical modification. DFT calculations of thermodynamic properties revealed the feasibility of the reactions. Electronic property (NBO charge) indicated charge transfer and structural changes during chemical modification.

Exploring barium-titanium-peroxo-hydroxide as an excellent single-source precursor for crystallographically diverse barium titanate ceramics – parametric study

Barium-titanium-peroxo type amorphous materials gained importance with the advent of wet-chemical methods for the production of crystalline perovskite barium titanate (BaTiO3) electroceramics. In this paper, the chemical nature of the barium-titanium-peroxo precursor was determined by means of elemental (EPMA), spectroscopic (FT-IR and FT-Raman), XRD and thermal (DSC and TGA/DTA) analyses. Several synthesis parameters such as the barium source, the peroxide treatment time, the reaction temperature and the reaction time were investigated. The precursor was also thermally treated at varying temperatures between 30 °C and 1000 °C. Relatively high reaction temperatures are detrimental to the Ba∙O∙Ti structure, resulting in plain TiO2 formation. Though relatively low temperatures (ice bath) are needed to suppress unwanted TiOCl2, ambient synthesis conditions and short reaction time (2 h) resulted in the desired single-source properties, i.e. amorphous Ba∙O∙Ti-peroxo structure with Ba/Ti ratio of unity (1.04 ± 0.04). The addition of an extra stirring step during H2O2 addition lowered the chance of carbonate incorporation in the precursor. Thermal analysis under air and nitrogen atmosphere was performed and a stoichiometric formula of Ba2,08Ti2O(O2)1,9(OH)5,3∙3,1H2O was calculated, which was in very good agreement with literature data. The barium-titanium-peroxo-hydroxide material proved to be an excellent single-source precursor. Phase-pure, highly crystalline and facetted, stoichiometric BaTiO3 particles with differently crystallographically oriented facets were obtained via the molten-salt solid-state method ({100} or {111} oriented facets) as well as the hydrothermal route ({100} oriented facets).

The effects of chemical treatment parameters on the yield of bamboo fibers extracted

Nitric Acid and Hydrogen Peroxide (NCHP) treatment offers an efficient method for extracting lignocellulosic fibers from bamboo in a single bath. This procedure effectively removes lignin and hemicellulose, facilitating the separation of bamboo fibers while gradually breaking down inter-microfibrils and interlamellar layers in the cell wall. This study focuses on assessing the yield of lignocellulosic fibers extracted under various chemical treatment parameters and characterizing these fibers. Utilizing crushed and air-dried bamboo as raw material, cellulose, lignin, and hemicellulose content was analyzed. Characterization involved Fourier Transform Infrared (FTIR) Spectroscopy, providing insights into the chemical properties of the extracted lignocellulosic fibers. The FTIR spectra revealed the preservation and reinforcement of cellulose functional groups, confirming the effectiveness of the NCHP treatment. Control over treatment yield was achieved by manipulating temperature, concentration, and time. Optimal conditions were identified: 3.2 mol/L nitric acid, 60 mmol/g hydrogen peroxide, 50°C, and 72 hours, resulting in a maximum fiber yield of 76%. The findings indicate that higher temperatures, prolonged treatment times, and appropriate concentrations significantly enhance fiber extraction. Specifically, the optimal conditions led to an improved yield and better preservation of cellulose content compared to untreated bamboo. The study demonstrates that the NCHP treatment is a robust and effective method for producing high-quality lignocellulosic fibers from bamboo, with potential applications in sustainable materials. In conclusion, the NCHP treatment provides a scalable and efficient approach to extracting lignocellulosic fibers, offering significant improvements in yield and chemical composition. This process has promising implications for industrial applications, particularly in the development of sustainable materials and biocomposites

Self-cascade ROS-trapping bioreaction system reverses stem cell oxidative stress fate for osteogenesis

eactive oxygen species (ROS) scavenging is essential for periodontal regeneration. However, the dynamic change of the applied materials within the ROS-rich environment and the residual oxidation products in the host highly impact periodontal regeneration. This study successfully constructs a bioreaction system via thiol-ene click chemistry, leveraging the high affinity of glutathione (GSH) for ROS to attract excess ROS to the crosslinking points. Two minutes after hydrogen peroxide (H2O2) treatment, the ROS level in the G8-0 hydrogel acutely decreases, reaching a 4.4% reduction within 10minutes, confirming the ROS-trapping efficacy. Through a ‘bait switch-on’ mechanism, hexagonal boron nitride (hBN) takes over the captured ROS and the oxidation products of pectin further drive the reduction reaction, ultimately restoring the extracellular environment. The self-cascade products, oxidized hBN, reshape the intracellular oxidative stress (OS) environment, achieving a synergistic extra- and intra-cellular treatment. The significantly high reduced to oxidized glutathione (GSH/GSSG) ratio in G8-10 hydrogel (~80%) illustrates a reversal of oxidative stress in bone marrow stem cells (BMSCs). On a molecular level, the bioreaction system inhibits the NF-κB pathway, promoting the expression of key antioxidant genes (Nqo1 and Nrf2) and osteogenic molecules (ALP and OCN), thereby reversing the detrimental effects of OS on BMSCs. In vivo application demonstrated the system’s strong redox-balancing and osteogenic capabilities in the periodontal inflammation environment. This novel antioxidant bioreaction system, characterized by self-cascade ROS-trapping and product utilization, offers innovative treatment strategies for tissue regeneration under conditions of excessive OS.

Decontamination of Biological Agents in Wastewater through Synergetic Oxidative Methods as an Effective Approach for Safeguarding Public Health and Aquatic Ecosystems

We employed a highly concentrated model of wastewater to conduct our research, accurately mimicking the composition of wastewater generated by milk processing enterprises. Wastewater contained milk protein, carbohydrates, and whey sugars. Domestic wastewater, which served as a source of indicator fecal microorganisms, was added to them. The water purification and disinfection scheme involved treating a model wastewater using the biosorption method with an immobilized biocenosis in a laboratory installation, followed by further purification and disinfection in a decontamination tank. In comparison, we assessed the degree of microorganism elimination using distinct methods such as ozonation, hydrogen peroxide treatment, and combination of О3/Н2О2. It has been demonstrated that model wastewater, purified and disinfected using the AOPs method, also contains dissolved oxygen, which is non-toxic to aquatic microbiota.

Pilot Assessment of Impacts of Ozone and Ozone/Hydrogen Peroxide Treatment on the Fate of Per- and Polyfluoroalkyl Substances and Precursors.

Per- and polyfluoroalkyl substances (PFAS) make up a large class of anthropogenic micropollutants prevalent in wastewater. Oxidative processes commonly used in wastewater potable reuse treatment may affect transformation of PFAS precursors, leading to elevated concentrations of perfluorinated alkyl acids (PFAAs) that are significant health concerns. This work conducted a pilot-scale investigation to assess the influence of ozonation (O3) and ozone/hydrogen peroxide (O3/H2O2) advanced oxidation process (AOP), respectively, on the fate of PFAS in a wastewater effluent subjected to reuse. The study evaluated 40 target PFAS and associated precursors [based on the total oxidizable precursor (TOP) assay] under various treatment conditions, including different ozone doses (1.0-4.0 mg·L-1), H2O2 doses (0-0.20 mg·L-1), and contact time (0-20 min). Results indicated that short-chain (C3-C7) PFAAs dominated in concentrations, while overall PFAA concentrations were elevated by both oxidative treatment processes, particularly after high-dose ozonation treatment. TOP assays revealed that there were considerable amounts of PFAA precursors in the reuse wastewater, and their concentrations were decreased after the oxidative treatment with an increase of some of the PFAAs. This pilot study demonstrated that ozone and ozone-based AOP treatments can have a moderate influence on the transformation of PFAS and increase in PFAA levels under practical conditions.

Changes in Cyanobacterial Phytoplankton Communities in Lake-Water Mesocosms Treated with Either Glucose or Hydrogen Peroxide.

When cyanobacterial phytoplankton form harmful cyanobacterial blooms (HCBs), the toxins they produce threaten freshwater ecosystems. Hydrogen peroxide is often used to control HCBs, but it is broadly toxic and dangerous to handle. Previously, we demonstrated that glucose addition to lake water could suppress the abundance of cyanobacteria. In this study, glucose was compared to hydrogen peroxide for the treatment of cyanobacterial phytoplankton communities. The six-week study was conducted in the large mesocosms facility at Grand Valley State University's Annis Water Resources Institute in Michigan. To 1000 L of Muskegon Lake water, glucose was added at either 150 mg or 30 mg glucose/L. Hydrogen peroxide was added at 3 mg/L to two 1000 L mesocosms. And two mesocosms were left untreated as controls. Triplicate 100 mL samples were collected weekly from each mesocosm, which were then filtered and frozen at -80 °C for 16S rRNA amplicon sequencing. The 16S rRNA amplicon sequencing results revealed that hydrogen peroxide treatment quickly reduced the relative abundance of the cyanobacteria compared to the control mesocosms, but the cyanobacteria population returned over the course of the 6-week study. On the other hand, both glucose concentrations caused a rapid proliferation of multiple low abundance proteobacterial and bacteroidotal taxa resulting in notable increases in taxonomic richness over the duration of the study and reducing the relative abundance of cyanobacteria. Although hydrogen peroxide quickly suppressed the cyanobacteria, the population later returned to near starting levels. The glucose suppressed the cyanobacterial phytoplankton apparently by promoting competitive heterotrophic bacteria.

Exogenous deferoxamine mesylate suppresses iron-dependent ferroptosis in postharvest fruit rot of blueberry caused by Alternaria alternata and Fusarium fujikuroi

Plant development relies heavily on regulated cell death, which is crucial for specific plant responses to biological stresses. Ferroptosis, an iron-dependent, oxidative, and non-apoptotic cell death form, has been recently discovered in animal cells. In this study, we investigated whether a ferroptosis-like process could be relevant to cell death in postharvest fruit rot of blueberry caused by Alternaria alternata and Fusarium fujikuroi. The results showed that deferoxamine mesylate and glutathione (GSH) treated fruit showed enhanced disease resistance with lower lesion areas, whereas an opposite result was observed in hydrogen peroxide (H2O2) treatment, indicating that intracellular ferroptosis might exist in the fungal infected blueberry fruit. Compared to control, deferoxamine mesylate or GSH treatment improved chlorophyll fluorescence parameters, which contributed to the stability of photosynthesis. In terms of ferroptosis pathway in the adjacent area of infected fruit, deferoxamine mesylate suppressed an iron-dependent cell death pathway that was characterized by depletion of H2O2 and MDA and accumulation of GSH, as well as the reduction of ferrous ions and total iron ions. Meanwhile, deferoxamine mesylate could effectively delay the decrease rate of unsaturation value and key phospholipids of fungi infected fruit during storage, which possibly maintained the integrity of cell membrane. Due to the serious rot of the lesion area, the peroxidation of membrane lipids was severe, accompanied by metabolic disorders. These combined results demonstrated that deferoxamine mesylate treatment could reduce Fenton reaction by chelating Fe2+ and avoid excessive accumulation of reactive oxygen species (ROS), suppress iron-dependent ferroptosis, thereby maintaining fruit quality and reducing postharvest diseases.

Effect of carbamide peroxide treatment on the ion release of different dental restorative materials

BackgroundTo predict the long-term performance of restorative materials in the oral environment, it is important to evaluate their resistance to chemical and mechanical degradation and to know the toxic potential of the type and amount of ions eluted from the filling material. In this study, home bleaching was applied to dental materials with different contents and it was aimed to determine the type and amount of ions released from these materials.MethodsIn this study, amalgam, posterior composite resin, anterior composite resin, bulk fill composite resin, indirect composite resin, hybrid ceramic and all-ceramic were used as restorative materials. 10 specimens of each material were prepared according to the manufacturer’s instructions. Each material group was divided into two subgroups as the bleached group and the control group. After bleaching, all specimens were stored in 1 ml of 75% ethanol/water solution. Solutions were renewed after 1, 14 and 28 days. The type and amount of ions released from the materials were determined using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Data were analyzed using the Friedman, Wilcoxon Signed Ranks, and Mann-Whitney U tests (α = 0.05).ResultsIt was determined that the amount of ions release from the restorative materials decreased over time (p < 0.05). According to the results of the Mann-Whitney U test, there was no difference between the bleaching and control groups in most of the restorative materials (p > 0.05).ConclusionWithin the limits of this study, home bleaching system does not have a significant effect on ion release from restorative materials.

Oxidative stress and culture atmosphere effects on bioactive compounds and laccase activity in the white rot fungus Phlebia radiata on birch wood substrate

Wood-decaying white rot fungi live in changing environmental conditions and may switch from aerobic to fermentative metabolism under oxygen depletion. Decomposition of wood and lignocellulose by fungi is dependent on enzymatic and oxidative biochemistry including generation of reactive oxygen species. In this study, we subjected semi-solid wood-substrate cultures of the white rot fungus Phlebia radiata to oxidative stress by addition of hydrogen peroxide under aerobic and anaerobic cultivation conditions. Wood decomposition and fungal metabolism were followed by analysis of extracellular organic compounds, mycelial growth, and laccase activity. Under both atmospheric conditions, accumulation of bioactive aromatic compounds from birch wood occurred into the culture supernatants after hydrogen peroxide treatment. The supernatants inhibited both fungal growth and laccase activity. However, the fungus recovered from the oxidative stress quickly in a few days, especially when cultivated under regular aerobic conditions. With repeated hydrogen peroxide treatments, laccase suppressive-recovery effect was observed. Culture supernatants demonstrated antioxidant and antimicrobial effects, in concert with emergence of chlorinated birch-derived organic compounds. Bioactivities in the cultures disappeared in the same pace as the chlorinated compounds were transformed and de-chlorinated by the fungus. Our results indicate tolerance of white rot fungi against excessive oxidative stress and wood-derived, growth-inhibiting and harmful agents.

Effect of alantolactones on cardiac parameters of animals under artificially induced oxidative stress.

Phytochemicals have been found effective in reducing the oxidative stress and damage to cardiovascular and other tissues. In this study, the effects of alantolactone (AL) on cardiac parameters in rabbits exposed to artificially-induced oxidative stress were investigated. The oxidative stress was induced in a group of White New Zealand rabbits by injecting 40% hydrogen peroxide solution (1 ml/kg body weight) thrice with an interval of 72 h. The hydrogen peroxide-treated animals were orally treated with AL extracted from the roots of Inula helenium (1 ml/kg repeated thrice after 72 h). Blood samples were taken before and after the hydrogen peroxide and AL treatments, and the sera were subjected to analysis of oxidative damage in terms of malondialdehyde content (MDA), total antioxidant activity (TAOA), linoleic acid reduction capacity (LARC), hydroxyl radical scavenging capacity (HRSC), 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity (DPPH RSC), superoxide dismutase activity (SOD) and catalase activity, and cardiac parameters including troponin-I content (Trop-I), creatine kinase-MB (CKMB), aspartate transaminase (AST). The hydrogen peroxide treatment substantially enhanced MDA content and SOD activity and decreased LARC, HRSC, DPPH, and catalase activity. The AL treatment significantly decreased MDA content, TAOA, Trop-I, CK-MB, and AST levels and increased LARC, DPPH RSC, HRSC, and catalase activity. The observed effect of AL treatment on the animals' oxidative stress, antioxidant status, and cardiac biomarkers emphasizes that AL may effectively manage oxidative stress and cardiac damage.

Isolation of Fiber-Cellulose and Characterization from Oil Palm Frond for 3D and 4D Printing Materials Application

The oil palm frond (OPF), a primary biomass derived from agricultural waste in oil palm production, holds significant potential for evolving into cellulose fiber. Leveraging natural materials for cellulose extraction aligns with environmental sustainability. In this study, we focus on separating cellulose fibers from OPF biomass. The OPF is divided into its leaflet and frond-axial parts, undergoing a sequence of steps: dewaxing, alkaline treatment, delignification, hydrogen peroxide treatment, and final filtration. These steps assess both efficacy and cellulose fiber outputs. Notably, the axial and leaflet portions yield cellulose fibers, effective as an initial extraction step before progressing to nanoscale slicing. Quantitatively, extraction yields indicate that 14.13% and 19.52% of the 100 g leaflet and frond-axial portions can be harvested. SEM images confirm well-dispersed individual fibers. Additionally, GCMS results reveal slightly higher carbon dioxide gas in the palm leaflet sample than in the palm frond-axial sample after five days of water soaking. This procedure efficiently initializes OPF for cellulose extraction, positioning it as an initial ingredient for subsequent 3D/4D printing material production.

The Abundance and Sources of Ice Nucleating Particles Within Alaskan Ice Fog

AbstractThe Alaskan Layered Pollution and Chemical Analysis (ALPACA) field campaign included deployment of a suite of atmospheric measurements in January–February 2022 with the goal of better understanding atmospheric processes and pollution under cold and dark conditions in Fairbanks, Alaska. We report on measurements of particle composition, particle size, ice nucleating particle (INP) composition, and INP size during an ice fog period (29 January–3 February). During this period, coarse particulate matter (PM10) concentrations increased by 150% in association with a decrease in air temperature, a stronger temperature inversion, and relatively stagnant conditions. Results also show a 18%–78% decrease in INPs during the ice fog period, indicating that particles had activated into the ice fog via nucleation. Peroxide and heat treatments performed on INPs indicated that, on average, the largest contributions to the INP population were heat‐labile (potentially biological, 63%), organic (31%), then inorganic (likely dust, 6%). Measurements of levoglucosan and bulk and single‐particle composition corroborate the presence of dust and aerosols from combustion sources. Heat‐labile and organic INPs decreased during the peak period of the ice fog, indicating those were preferentially activated, while inorganic INPs increased, suggesting they remained as interstitial INPs. In general, INP concentrations were unexpectedly high in Fairbanks compared to other locations in the Arctic during winter. The fact that these INPs likely facilitated ice fog formation in Fairbanks has implications for other high latitude locations subject to the hazards associated with ice fog.

Long-Term Monitoring of Microplastics in a German Municipal Wastewater Treatment Plant

Wastewater treatment plants (WWTPs) have been identified as important point sources for microplastics (MPs) in the environment; monitoring MP emissions in the WWTP effluent is therefore essential for contamination control. The aim of this study is to acquire a large number of samples (320) over a period of two years and three months to determine the temporal variations in microplastic contamination in the outlet of the municipal WWTP Landau-Mörlheim. The effluent of the third cleaning stage is sampled with a 10 µm filter cartridge, processed in the laboratory using a hydrogen peroxide treatment, and MPs are then detected by fluorescence staining. The results show high temporal variations in the microplastic concentrations in the effluent of the WWTP. This indicates that high numbers of samples are necessary to obtain a representative assessment of the microplastic emissions; single samples are not representative. The average microplastic concentration in the effluent was 27.8 ± 29.8 MP/L, ranging from 0.6 MP/L to 194.0 MP/L. This leads to a yearly emission of 1.5 × 1011 MP for the WWTP Landau-Mörlheim, corresponding to an emission of 2.8 × 106 MP/inhabitant and year. Statistically significant seasonal variations could not be observed, although there is a trend towards lower MP concentrations in summer. Further, no correlations with other wastewater or weather parameters could be found.

Ultrasound Depolymerization and Characterization of Poly- and Oligosaccharides from the Red Alga Solieria chordalis (C. Agardh) J. Agardh 1842.

Red seaweed carrageenans are frequently used in industry for its texturizing properties and have demonstrated antiviral activities that can be used in human medicine. However, their high viscosity, high molecular weight, and low skin penetration limit their use. Low-weight carrageenans have a reduced viscosity and molecular weight, enhancing their biological properties. In this study, ι-carrageenan from Solieria chordalis, extracted using hot water and dialyzed, was depolymerized using hydrogen peroxide and ultrasound. Ultrasonic depolymerization yielded fractions of average molecular weight (50 kDa) that were rich in sulfate groups (16% and 33%) compared to those from the hydrogen peroxide treatment (7 kDa, 6% and 9%). The potential bioactivity of the polysaccharides and low-molecular-weight (LMW) fractions were assessed using WST-1 and LDH assays for human fibroblast viability, proliferation, and cytotoxicity. The depolymerized fractions did not affect cell proliferation and were not cytotoxic. This research highlights the diversity in the biochemical composition and lack of cytotoxicity of Solieria chordalis polysaccharides and LMW fractions produced by a green (ultrasound) depolymerization method.

PSf Membrane-Impregnated Jute-Copper Nanocomposite as Highly Efficient Dye Removal Material.

Water pollution, driven by the discharge of dyes from industrial processes, poses a significant environmental and health hazard worldwide. Methylene blue, a common dye, constitutes particular concern due to its persistence and toxicity. Conventional wastewater treatment methods often struggle to effectively remove such contaminants. In this study, we introduce a novel approach utilizing a polysulfone-based composite membrane incorporating pretreated jute fibers and copper nanoparticles for the removal of methylene blue from aqueous solutions. The pretreated jute fibers undergo alkali and hydrogen peroxide treatments to enhance their adsorption capabilities, while copper nanoparticles are incorporated into the membrane to bolster its antimicrobial properties. Through comprehensive characterization techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), and scanning electron microscopy (SEM), we confirm the structural and chemical properties of the composite membranes. Batch adsorption studies reveal the superior performance of the composite membrane compared with individual components. Specifically, at lower methylene blue concentrations (∼20 ppm), the composite membrane demonstrates a remarkable percent removal value of about 97%, while at higher concentrations (∼100 ppm), the percent removal remains substantial at 85%. Additionally, desorption studies elucidate the retention capacity of the adsorbed dye, indicating the feasibility of the composite membrane for practical applications in wastewater treatment. These findings underscore the potential of nanocomposite-fiber membranes as sustainable and cost-effective solutions for mitigating water pollution. By harnessing advancements in nanotechnology and materials science, the presented innovative composite membranes could offer promising avenues for addressing water pollution challenges and promoting environmental sustainability.

Inducing Aquilaria sinensis (Lour.) Spreng “Qinan” Agarwood Formation with Chemical Reagents

Agarwood is a highly sought-after resinous wood for use in medicine, incense, and perfume production. However, the process of agarwood formation is slow. In this study, the induction of agarwood formation in three-year-old Aquilaria sinensis “Qinan” trees through treatment with ethephon, hydrogen peroxide, sodium chloride, distilled water, and wounding was investigated. The results showed that the starch content significantly decreased and that the soluble sugar content significantly increased during the process of agarwood formation, with no significant difference between the different treatment groups. The net photosynthetic rate significantly decreased. Except for the sodium chloride treatment, the total antioxidant capacity and the contents of flavonoids and phenols significantly increased during the process of agarwood formation. The essential oil yield of the ethephon and hydrogen peroxide treatment groups was significantly higher than that of the other treatment groups, with the highest essential oil yield in the ethephon treatment group. Compared to the control group, salt treatment produced the lowest essential oil yield of agarwood. The results indicate that appropriate concentrations of ethephon and hydrogen peroxide can promote the formation of agarwood in A. sinensis “Qinan”.