Hydrogen Evolution Research Articles

Theoretical Study of Single-Atom Catalysts for Hydrogen Evolution Reaction Based on BiTeBr Monolayer

Developing an inexpensive and efficient catalyst for a hydrogen evolution reaction (HER) is an effective measure to alleviate the energy crisis. Single-atom catalysts (SACs) based on Janus materials demonstrated promising prospects for the HER. Herein, density functional theory calculations were conducted to systematically investigate the performance of SACs based on the BiTeBr monolayer. Among the one hundred and forty models that were constructed, fourteen SACs with potential HER activity were selected. Significantly, the SAC, in which a single Ru atom is anchored on a BiTeBr monolayer with a Bi vacancy (RuS2/VBi-BiTeBr), exhibits excellent HER activity with an ultra-low |ΔGH*| value. A further investigation revealed that RuS2/VBi-BiTeBr tends to react through the Volmer–Heyrovsky mechanism. An electronic structure analysis provided deeper insights into this phenomenon. This is because the Tafel pathway requires overcoming steric hindrance and disrupting stable electron filling states, making it challenging to proceed. This study finally employed constant potential calculations, which approximate experimental situations. The results indicated that the ΔGH* value at pH = 0 is 0.056 eV for RuS2/VBi-BiTeBr, validating the rationality of the traditional Computational Hydrogen Electrode (CHE) method for performance evaluation in this system. This work provides a reference for the research of new HER catalysts.

Microwave-Assisted Synthesis of SnO2@ZnIn2S4 Composites for Highly Efficient Photocatalytic Hydrogen Evolution

This research successfully synthesized SnO2@ZnIn2S4 composites for photocatalytic tap water splitting using a rapid two-step microwave-assisted synthesis method. This study investigated the impact of incorporating a fixed quantity of SnO2 nanoparticles and combining them with various materials to form composites, aiming to enhance photocatalytic hydrogen production. Additionally, different weights of SnO2 nanoparticles were added to the ZnIn2S4 reaction precursor to prepare SnO2@ZnIn2S4 composites for photocatalytic hydrogen production. Notably, the photocatalytic efficiency of SnO2@ZnIn2S4 composites is substantially higher than that of pure SnO2 nanoparticles and ZnIn2S4 nanosheets: 17.9-fold and 6.3-fold, respectively. The enhancement is credited to the successful use of visible light and the facilitation of electron transfer across the heterojunction, leading to the efficient dissociation of electron–hole pairs. Additionally, evaluations of recyclability demonstrated the remarkable longevity of SnO2@ZnIn2S4 composites, maintaining high levels of photocatalytic hydrogen production over eight cycles without significant efficiency loss, indicating their impressive durability. This investigation presents a promising strategy for crafting and producing environmentally sustainable SnO2@ZnIn2S4 composites with prospective implementations in photocatalytic hydrogen generation.

Creating High‐entropy Single Atoms on Transition Disulfides through Substrate‐induced Redox Dynamics for Efficient Electrocatalytic Hydrogen Evolution

The controllable anchoring of multiple metal single‐atoms (SAs) into a single support exhibits scientific and technological opportunities,while marrying the concentration‐complex multimetallic SAs and high‐entropy SAs (HESAs) into one SAC system remains a substantial challenge.Here, we present a substrate‐mediated SAs formation strategy to successfully fabricate a library of multimetallic SAs and HESAs on MoS2 and MoSe2 supports, which can precisely control the doping location of SAs. Specially, the contents of SAs can continuously increase until the accessible Mo atoms on TMDs carriers are completely replaced by SAs, thus allowing the of much higher metal contents.In‐depth mechanistic study shows that the well‐controlled synthesis of multimetallic SAs and HESAs is realized by controlling the reversible redox reaction occurred on the TMDs/TM ion interface.As a proof‐of‐concept application, a variety of SAs‐TMDs were applied to hydrogen evolution reaction. The optimized HESAs‐TMDs (Pt,Ru,Rh,Pd,Re‐MoSe2) delivers a much higher activity and durability than state of‐the‐art Pt. Thus, our work will broaden the family of single‐atom catalysts and provide a new guideline for the rational design of high‐performance single‐atom catalysts.

Lattice-matched spinel/layered double hydroxide 2D/2D heterojunction towards large-current-density overall water splitting

It is fascinating and challenging to construct earth-abundant first-row transition metal-based bifunctional electrocatalysts for large-scale hydrogen production via water electrolysis. Here we report a progressive conversion from spinel nanosheets to layered double hydroxide (LDH) nanosheets through the preferential dissolution of alternated layers in spinel. This process enables the formation of a lattice-matched and chemically bonded edge-to-edge spinel/LDH 2D/2D heterojunction. Significant charge redistribution at the 2D/2D heterointerface accelerates water dissociation kinetics and optimize adsorption energy of hydrogen- and oxygen-containing intermediates. The synthesized CoFe2O4/CoFe-LDH 2D/2D heterojunction demonstrates exceptional performance in the hydrogen evolution reaction, achieving an overpotential of 337 mV at a high current density of 1000 mA cm−2, surpassing previously reported non-noble metal-based spinels and LDHs. Furthermore, its oxygen evolution reaction performance is comparable to that of typical spinel and LDH catalysts. The in-depth insights can guide rational interfacial engineering of heterogeneous catalysts for energy and environmental applications.

Material Engineering Strategies for Efficient Hydrogen Evolution Reaction Catalysts.

Water electrolysis, a key enabler of hydrogen energy production, presents significant potential as a strategy for achieving net-zero emissions. However, the widespread deployment of water electrolysis is currently limited by the high-cost and scarce noble metal electrocatalysts in hydrogen evolution reaction (HER). Given this challenge, design and synthesis of cost-effective and high-performance alternative catalysts have become a research focus, which necessitates insightful understandings of HER fundamentals and material engineering strategies. Distinct from typical reviews that concentrate only on the summary of recent catalyst materials, this review article shifts focus to material engineering strategies for developing efficient HER catalysts. In-depth analysis of key material design approaches for HER catalysts, such as doping, vacancy defect creation, phase engineering, and metal-support engineering, are illustrated along with typical research cases. A special emphasis is placed on designing noble metal-free catalysts with a brief discussion on recent advancements in electrocatalytic water-splitting technology. The article also delves into important descriptors, reliable evaluation parameters and characterization techniques, aiming to link the fundamental mechanisms of HER with its catalytic performance. In conclusion, it explores future trends in HER catalysts by integrating theoretical, experimental and industrial perspectives, while acknowledging the challenges that remain.

Accelerating the Screening of Modified MA2Z4 Catalysts for Hydrogen Evolution Reaction by Deep Learning‐Based Local Geometric Analysis

Machine learning (ML) integrated with density functional theory (DFT) calculations have recently been used to accelerate the design and discovery of single‐atom catalysts (SACs) by establishing deep structure–activity relationships. The traditional ML models are always difficult to identify the structural differences among the single‐atom systems with different modification methods, leading to the limitation of the potential application range. Aiming to the structural properties of several typical two‐dimensional MA2Z4‐based single‐atom systems (bare MA2Z4 and metal single‐atom doped/supported MA2Z4), an improved crystal graph convolutional neural network (CGCNN) classification model was employed, instead of the traditional machine learning regression model, to address the challenge of incompatibility in the studied systems. The CGCNN model was optimized using crystal graph representation in which the geometric configuration was divided into active layer, surface layer, and bulk layer (ASB‐GCNN). Through ML and DFT calculations, five potential single‐atom hydrogen evolution reaction (HER) catalysts were screened from chemical space of 600 MA2Z4‐based materials, especially V1/HfSn2N4(S) with high stability and activity (ΔGH* is 0.06 eV). Further projected density of states (pDOS) analysis in combination with the wave function analysis of the SAC‐H bond revealed that the SAC‐dz2 orbital coincided with the H‐s orbital around the energy level of −2.50 eV, and orbital analysis confirmed the formation of σ bonds. This study provides an efficient multistep screening design framework of metal single‐atom catalyst for HER systems with similar two‐dimensional supports but different geometric configurations.

Insight of hydrogen evolution reaction in slab SnO2 loaded with transition metal atoms

The utilization of hydrogen energy has emerged as a promising solution for clean and sustainable energy sources. The development of cost-effective catalysts with high activity and stability is crucial for efficient hydrogen production. In this work, we investigated the hydrogen evolution reaction (HER) catalytic activity of single transition metal atom (TM = V, Cr, Mn, Fe, Co, Ni) on slab SnO2 by using density functional theory. Our results revealed that the catalytic activity of the slab SnO2 can be significantly enhanced by loading the transition atom. By calculating the Gibbs free energies and exchange current densities in different adsorption configurations of TM-SnO2, single-atom catalyst (SAC) of Mn-loaded SAC exhibits excellent catalytic performance, characterized by a low Gibbs free energy barrier (−0.05 eV). Introducing a TM on the SnO2 surface breaks its local symmetry, while the strong coupling between the metal and H atoms enhances catalytic performance. The synergetic effect of symmetry breaking and metal-H interaction boosts overall catalytic activity. This work not only proposes a novel non-platinum HER catalyst based on SnO2 but also lays a solid foundation for future applications of SnO2-based catalysts.

Density Functional Study of Electrocatalytic Carbon Dioxide Reduction in Fourth-Period Transition Metal–Tetrahydroxyquinone Organic Framework

This study investigates the utilisation of organometallic network frameworks composed of fourth-period transition metals and tetrahydroxyquinone (THQ) in electrocatalytic CO2 reduction. Density functional theory (DFT) calculations were employed in analysing binding energies, as well as the stabilities of metal atoms within the THQ frameworks, for transition metal TM-THQs ranging from Y to Cd. The findings demonstrate how metal atoms could be effectively dispersed and held within the THQ frameworks due to sufficiently high binding energies. Most TM-THQ frameworks exhibited favourable selectivity towards CO2 reduction, except for Tc and Ru, which experienced competition from hydrogen evolution reaction (HER) and required solution environments with pH values greater than 5.716 and 8.819, respectively, to exhibit CO2RR selectivity. Notably, the primary product of Y, Ag, and Cd was HCOOH; Mo produced HCHO; Pd yielded CO; and Zr, Nb, Tc, Ru, and Rh predominantly generated CH4. Among the studied frameworks, Zr-THQ displayed values of 1.212 V and 1.043 V, corresponding to the highest limiting potential and overpotential, respectively, while other metal–organic frameworks displayed relatively low ranges of overpotentials from 0.179 V to 0.949 V. Consequently, it is predicted that the TM-THQ framework constructed using a fourth-period transition metal and tetrahydroxyquinone exhibits robust electrocatalytic reduction of CO2 catalytic activity.

Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids

AbstractThe electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value‐added fuels and feedstocks, advancing a carbon‐neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long‐term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon‐neutral community.

Catalytic activity of Ni–Cr–Fe–Mo porous materials for hydrogen evolution reaction in alkaline media

The hydrogen evolution reaction (HER) based on water electrolysis represents an ideal approach for hydrogen production. The advancement of highly active non-precious metal catalysts holds paramount importance. This research employed powder metallurgy sintering to prepare Ni–Cr–Fe and Ni–Cr–Fe–Mo porous materials. It investigated the impact of Mo doping and sintering temperature on the catalytic activity and microstructural influence of hydrogen evolution materials. Furthermore, the materials' electrochemical performance and long-term stability in 6 mol/L KOH were examined. In complicated systems, the current work provides a feasible method for producing hydrogen from Ni–Cr–Fe–Mo porous materials in a strong alkali environment. The results exhibited that when Mo content is 5% and the sintering temperature is 800 °C, the porosity of Ni–Cr–Fe–Mo porous materials is up to 39.9% and the catalytic activity is up to 97%. At the same time, the current density decays to 7.1% after 1000 cycles of electrolysis and shows good HER stability after 48 h. The enhanced catalytic activity for hydrogen evolution emanated from the positive synergy among the transition metal elements.

Recent Advancements in Ascribing Several Platinum Free Electrocatalysts Pertinent to Hydrogen Evolution from Water Reduction.

The advancement of a sustainable and scalable catalyst for hydrogen production is crucial for the future of the hydrogen economy. Electrochemical water splitting stands out as a promising pathway for sustainable hydrogen production. However, the development of Pt-free electrocatalysts that match the energy efficiency of Pt while remaining economical poses a significant challenge. This review addresses this challenge by highlighting latest breakthroughs in Pt-free catalysts for the hydrogen evolution reaction (HER). Specifically, we delve into the catalytic performance of various transition metal phosphides, metal carbides, metal sulphides, and metal nitrides toward HER. Our discussion emphasizes strategies for enhancing catalytic performance and explores the relationship between structural composition and the performance of different electrocatalysts. Through this comprehensive review, we aim to provide insights into the ongoing efforts to overcome barriers to scalable hydrogen production and pave the way for a sustainable hydrogen economy.

Diamondoid Ni(II) Coordination Polymer as an Electrocatalyst for Hydrogen and Oxygen Evolution Reactions and Overall Water Splitting.

We have successfully synthesized a new Ni(II)-based coordination polymer (CP) [Ni2(cis-1,4-chdc)2(4,4'-bpy)3(H2O)2] (1); (cis-1,4- H2chdc=cis-1,4-cyclohexanedicarboxylic acid and 4,4'-bpy=4,4'-bipyridine) employing slow diffusion method in a single pot technique. The connectivity of Ni(II) ions and bridging cis-1,4-chdc ligand gives rise to a three-dimensional (3D) framework with 2-fold interpenetrated diamondoid topology. Interestingly, the synthesized CP acts as efficient catalyst for electrocatalytic water splitting. The water oxidation activity of compound 1 exhibits Tafel slope equivalent to 361.48 mV.dec-1 for hydrogen evolution reaction (HER) and 353.53 mV.dec-1 for oxygen evolution reaction (OER) in an alkaline medium while almost similar values of Tafel slope for HER and OER equivalent to 287.33 mV.dec-1 and 289.93 mV.dec-1 respectively in acidic medium. Thus, the compound 1 has excellent efficacy in catalyzing HER and OER in acidic as well as alkaline medium, which is ascribed to its distinctive 3D architecture.

Renewable energy storage using hydrogen produced from seawater membrane-less electrolysis powered by triboelectric nanogenerators

Utilization of widely available seawater for hydrogen generation using robust electrolysis methods can provide sustainable solutions to energy carriers. Sea waves at the same time provide abundant renewable energy that can produce the electricity required for seawater electrolysis. This work presents a novel design for a self-powered hydrogen generation based on membrane-less seawater electrolysis integrated with spring-assisted spherical triboelectric nanogenerators. To streamline fabrication and minimize maintenance expenses, water electrolysis is conducted in a membrane-less electrochemical cell reactor. Employing a mathematical model, the system's performance is analyzed across different catalysts, electrolytes, and operational temperatures. The modeling outcomes indicate that elevating the cell's temperature can lower the necessary potential, enhancing overall electrochemical cell efficiency and decreasing capacitor charging duration. The voltage required for the cell to reach 100 mA cm−2 in the seawater decreases from 2.4 V to 1.9 V as the cell temperature increase from 25 °C to 70 °C. This is due to the decline in the hydrogen and oxygen evolution reaction overpotentials for NPNNS and Ti supported PtPd from 351 mV to 246 mV and 568 mV–394 mV, respectively. Furthermore, increase in the temperature results in an additional 19 % improvement in cell efficiency from 78 % to 97 % and producing hydrogen per cycle during electrolysis of seawater increase from 0.015 μmole to 0.020 μmole.

Phase-Engineered Dichalcogenides/Fluorine-Free V4C3Tx (T=OH, O) Heterostructures for pH-Universal Hydrogen Evolution Reaction.

This research addresses the pH-dependency limitation in electrocatalytic hydrogen evolution reactions (HER) by creating heterostructures through the chemical bonding between 2D-dichalcogenides and V4C3Tx (T=OH, O) planes. The one-step solvothermal synthesis employed in this study constructs a synergistically interacted 1T phase of, e.g., MoS2 and V4C3Tx MXene, demonstrating an omnidirectional improvement on catalytic stability, active site exposure, surface area enlargement, electrical conductivity, and hence enhancement of water dissociation activities. Despite the notable progress in creating hydrogen production catalysts with ground breaking performances, a significant gap remains in the availability of catalysts capable of functioning effectively under high current densities. The catalyst 1T MoS2@V4C3Tx shows remarkable activities under the current density of 1000mAcm-2, which require overpotentials of 16, 24, and 37mV in 0.5m H2SO4, 1 m KOH, and 0.1 m PBS electrolytes, respectively at 10 mA cm-2, and exhibits excellent HER performance with small overpotentials of 103.16 and 138mV to achieve current densities of 500 and 1000mAcm-2, respectively, with outstanding stability for 1000 cylic voltammetriccycle HER test without degradation in acidic media. Enhanced HER performance has also been observed in other 2D-dichalcogenides/V4C3Tx heterostructures, providing prospects for phase-engineered dichalcogenides/fluorine-free V4C3Tx composites for pH-universal HER.

Understanding mechanism conversion in hydrogen evolution reaction on PtSe2: Role of layer number explored by density functional theory

The emerging two-dimensional (2D) transition metal dichalcogenide PtSe2 is a promising catalyst for hydrogen evolution reactions (HER). In this study, we performed density functional theory (DFT) calculations to investigate the mechanism conversion of the HER over PtSe2 with respect to the changes in the number of layers of the catalyst. We found that the adsorption energy of hydrogen (ΔGH) changed with an increase in the number of 2D material layers, and the most significant change occurred when the number of layers was increased from one to two. Furthermore, we conducted dynamic calculations to reveal the mechanisms of the HER on the basal and Vse surfaces. Owing to the changes in ΔGH, the HER mechanism undergoes a conversion between Volmer–Heyrovsky and Volmer–Volmer'–Tafel mechanisms. Through frontier orbitals analysis, layer-stacking altered the bonding capability between hydrogen and PtSe2 surfaces by altering the electronic structure of the PtSe2 surface. This study demonstrates the synergistic effect of interlayer interactions on the HER over PtSe2 catalysts and can be helpful in stimulating innovative ideas for 2D material design.

Heterointerface-Rich Ni3N/WO3 Hierarchical Nanoarrays for Efficient Glycerol Oxidation-Assisted Alkaline Hydrogen Evolution.

Glycerol oxidation-assisted water electrolysis has emerged as a cost-effective way of co-producing green hydrogen and HCOOH. Still, preparing highly selective and stable nickel-based metal electrocatalysts remains a challenge. Herein, heterostructure Ni3N/WO3 nanosheet arrays of bifunctional catalysts with large specific surface areas loaded on nickel foam (denoted as Ni3N/WO3/NF) were synthesized. This catalyst was for glycerol oxidation reaction (GOR) and hydrogen evolution reaction (HER) with excellent catalytic performance, a voltage saving of 267 mV compared to oxygen evolution reaction (OER), and a HER overpotential of 104 mV at 100 mA cm-2. The cell voltage in the assembled GOR//HER hybrid electrolysis system reaches 100 mA cm-2 at 1.50 V, 296 mV lower than the potential required for overall water splitting. This work demonstrates that replacing GOR with OER using a cost-effective and highly active Ni-based bifunctional electrocatalyst can make hybrid water electrolysis an energy-efficient, sustainable, and green strategy for hydrogen production.

Efficient Decoupled Electrolytic Water Splitting in Acid through Pseudocapacitive TiO2.

Water electrolysis remains a key component in the societal transition to green energy. Membrane electrolyzers are the state-of-the-art technology for water electrolysis, relying on 80°C operation in highly alkaline electrolytes, which is undesirable for many of the myriad end-use cases for electrolytic water splitting. Herein, an alternative water electrolysis process, decoupled electrolysis, is described which performed in mild acidic conditions with excellent efficiencies. Decoupled electrolysis sequentially performs the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), at the same catalyst. Here, H+ ions generated from the OER are stored through pseudocapacitive (redox) charge storage, and released to drive the HER. Here, decoupled electrolysis is demonstrated using cheap, abundant, TiO2 for the first time. To achieve decoupled acid electrolysis, ultra-small anatase TiO2 particles (4.5nm diameter) are prepared. These ultra-small TiO2 particles supported on a carbon felt electrode show a highly electrochemical surface area with a capacitance of 375Fg-1. When these electrodes are tested for decoupled water splitting an overall energy efficiency of 52.4% is observed, with excellent stability over 3000 cycles of testing. This technology can provide a viable alternative to membrane electrolyzers-eliminating the need for highly alkaline electrolytes and elevated temperatures.

Ruthenium Nanoclusters and Single Atoms on α-MoC/N-Doped Carbon Achieves Low-input/Input-free Hydrogen Evolution via Decoupled/Coupled Hydrazine Oxidation.

The hydrazine oxidation-assisted H2 evolution method promises low-input and input-free hydrogen production. However, developing high-performance catalysts for hydrazine oxidation (HzOR) and hydrogen evolution (HER) is challenging. Here, we introduce a bifunctional electrocatalyst α-MoC/N-C/RuNSA, merging ruthenium (Ru) nanoclusters (NCs) and single atoms (SA) into cubic α-MoC nanoparticles-decorated N-doped carbon (α-MoC/N-C) nanowires, through electrodeposition. The composite showcases exceptional activity for both HzOR and HER, requiring -80 mV and -9 mV respectively to reach 10 mA cm-2. Theoretical and experimental insights confirm the importance of two Ru species for bifunctionality: NCs enhance the conductivity, and its coexistence with SA balances the H adsorption for HER and facilitates the initial dehydrogenation during the HzOR. In the overall hydrazine splitting (OHzS) system, α-MoC/N-C/RuNSA excels as both anode and cathode materials, achieving 10 mA cm-2 at just 64 mV. The zinc hydrazine (Zn-Hz) battery assembled with α-MoC/N-C/RuNSA cathode and Zn foil anode can exhibit 96% energy efficiency, as well as temporary separation of hydrogen gas during the discharge process. Therefore, integrating Zn-Hz with OHzS system enables self-powered H2 evolution, even in hydrazine sewage. Overall, the amalgamation of NCs with SA achieves diverse catalytic activities for yielding multifold hydrogen gas through advanced cell-integrated-electrolyzer system.

Dewetting of Pt Nanoparticles Boosts Electrocatalytic Hydrogen Evolution Due to Electronic Metal‐Support Interaction

AbstractSolid‐state dewetting is the heat‐induced agglomeration of thin metal films into defined nanoparticles (NPs). Dewetted Pt nanoparticles are investigated on F‐doped SnO2 (FTO) substrates as model binder‐free electrodes for the hydrogen evolution reaction (HER). Dewetting of Pt films into particles exposes the FTO substrate and the metal/support (Pt‐FTO) contact line. Despite the decrease in Pt electrochemical surface area (ECSA) upon dewetting, dewetted NPs show a >3‐fold increase in ECSA‐normalized HER activity compared to as‐deposited nanocrystalline Pt films. Electrodes designed with dewetted Pt NPs of different sizes show that the HER activity does not only correlate with the ECSA but also increases with increasing the Pt‐FTO contact line length. The smaller the NPs, the larger the Pt‐FTO contact line, and the higher the activity. This effect is ascribed to electronic metal‐support interaction (EMSI), due to electron transfer from FTO to Pt. It is proposed that EMSI effects alter the electronic structure of Pt sites near the Pt‐FTO contact line, facilitating the H2 evolution kinetics. When NPs are a few nm‐sized, a large mass fraction of Pt is affected by EMSI, resulting in a further increase of HER activity compared to NPs ≥10 nm despite the lower ECSA.

Photogeneration of Hydrogen: Insights from a Pt(II)‐Complex Incorporated into a Covalent Organic Framework

AbstractPt(II)‐based molecular catalysts stand as a prototypical system in hydrogen evolution reactions (HER) owing to their consistently elevated activity levels. Their integration into heterogeneous systems thus provides an ideal platform to develop catalytic materials with optimal atom economy. In this work, by rational molecular design, we have synthesized a novel two‐dimensional photoactive Covalent Organic Framework (COF), wherein the pore walls host a quinoline‐based α‐diimine ligand serving as a coordination site for anchoring a Pt(II) molecular catalyst. Thorough structural analyses, employing X‐ray photoelectron spectroscopy (XPS), infrared spectroscopy (FT‐IR), diffuse reflectance spectroscopy (DR), coupled with DFT calculations, distinctly confirm the Pt(II) complexation through the coordination site of the α‐diimine ligand. The Pt(II)‐metalated COF exhibits photocatalytic activity with a hydrogen evolution rate reaching up to 1300 μmol g−1 h−1. Nevertheless, the occurrence of platinum nanoparticles in post‐catalysis samples, along with reduced photocatalytic activity in the presence of chloride ions, suggests that Pt(II) anchored into the COF backbone might not be the primary catalytic site.