Hydrogen-bonded Ribbons Research Articles

Synthesis, crystal structure and Hirshfeld analysis of N-ethyl-2-{3-methyl-2-[(2Z)-pent-2-en-1-yl]cyclo-pent-2-en-1-yl-idene}hydrazinecarbo-thio-amide.

The title compound (C14H23N3S, common name: cis-jasmone 4-ethyl-thio-semicarbazone) was synthesized by the equimolar reaction of cis-jasmone and 4-ethyl-thio-semicarbazide in ethanol facilitated by acid catalysis. There is one crystallographically independent mol-ecule in the asymmetric unit, which shows disorder of the terminal ethyl group of the jasmone carbon chain [site-occupancy ratio = 0.911 (5):0.089 (5)]. The thio-semicarbazone entity [N-N-C(=S)-N] is approximately planar, with the maximum deviation of the mean plane through the N/N/C/S/N atoms being 0.0331 (8) Å, while the maximum deviation of the mean plane through the five-membered ring of the jasmone fragment amounts to -0.0337 (8) Å. The dihedral angle between the two planes is 4.98 (7)°. The mol-ecule is not planar due to this structural feature and the sp 3-hybridized atoms of the jasmone carbon chain. Additionally, one H⋯N intra-molecular inter-action is observed, with graph-set motif S(5). In the crystal, the mol-ecules are connected through pairs of H⋯S inter-actions with R 2 2(8) and R 2 1(7) graph-set motifs into centrosymmetric dimers. The dimers are further connected by H⋯N inter-actions with graph-set motif R 2 2(12), which are related by an inversion centre, forming a mono-periodic hydrogen-bonded ribbon parallel to the b-axis. The crystal structure and the supra-molecular assembly of the title compound are compared with four known cis-jasmone thio-semicarbazone derivatives (two crystalline modifications of the non-substituted form, the 4-methyl and the 4-phenyl derivatives). A Hirshfeld surface analysis indicates that the major contributions for the crystal cohesion are from H⋯H (70.7%), H⋯S/S⋯H (13.5%), H⋯C/C⋯H (8.8%), and H⋯N/N⋯H (6.6%) inter-faces (only the disordered atoms with the highest s.o.f. were considered for the evaluation).

A second crystalline modification of 2-{3-methyl-2-[(2Z)-pent-2-en-1-yl]cyclo-pent-2-en-1-yl-idene}hydrazinecarbo-thio-amide.

A second crystalline modification of the title compound, C12H19N3S [common name: cis-jasmone thio-semicarbazone] was crystallized from tetra-hydro-furane at room temperature. There is one crystallographic independent mol-ecule in the asymmetric unit, showing disorder in the cis-jasmone chain [site-occupancy ratio = 0.590 (14):0.410 (14)]. The thio-semicarbazone entity is approximately planar, with the maximum deviation from the mean plane through the N/N/C/S/N atoms being 0.0463 (14) Å [r.m.s.d. = 0.0324 Å], while for the five-membered ring of the jasmone fragment, the maximum deviation from the mean plane through the carbon atoms amounts to 0.0465 (15) Å [r.m.s.d. = 0.0338 Å]. The mol-ecule is not planar due to the dihedral angle between these two fragments, which is 8.93 (1)°, and due to the sp 3-hybridized carbon atoms in the jasmone fragment chain. In the crystal, the mol-ecules are connected by N-H⋯S and C-H⋯S inter-actions, with graph-set motifs R 2 2(8) and R 2 1(7), building mono-periodic hydrogen-bonded ribbons along [010]. A Hirshfeld surface analysis indicates that the major contributions for the crystal cohesion are H⋯H (67.8%), H⋯S/S⋯H (15.0%), H⋯C/C⋯H (8.5%) and H⋯N/N⋯H (5.6%) [only non-disordered atoms and those with the highest s.o.f. were considered]. This work reports the second crystalline modification of the cis-jasmone thio-semicarbazone structure, the first one being published recently [Orsoni et al. (2020 ▸). Int. J. Mol. Sci. 21, 8681-8697] with the crystals obtained in ethanol at 273 K.

2-{1-[(6R,S)-3,5,5,6,8,8-Hexamethyl-5,6,7,8-tetra-hydro-naphthalen-2-yl]ethyl-idene}-N-methyl-hydrazinecarbo-thioamide.

The reaction between a racemic mixture of (R,S)-fixolide and 4-methyl-thio-semicarbazide in ethanol with a 1:1 stoichiometric ratio and catalysed with HCl, yielded the title compound, C20H31N3S [common name: (R,S)-fixolide 4-methyl-thio-semicarbazone]. There is one crystallographically independent mol-ecule in the asymmetric unit, which is disordered over the aliphatic ring [site-occupancy ratio = 0.667 (13):0.333 (13)]. The disorder includes the chiral C atom, the neighbouring methyl-ene group and the methyl H atoms of the methyl group bonded to the chiral C atom. The maximum deviations from the mean plane through the disordered aliphatic ring amount to 0.328 (6) and -0.334 (6) Å [r.m.s.d. = 0.2061 Å], and -0.3677 (12) and 0.3380 (12) Å [r.m.s.d. = 0.2198 Å] for the two different sites. Both fragments show a half-chair conformation. Additionally, the N-N-C(=S)-N entity is approximately planar, with the maximum deviation from the mean plane through the selected atoms being 0.0135 (18) Å [r.m.s.d. = 0.0100 Å]. The mol-ecule is not planar due to the dihedral angle between the thio-semicarbazone entity and the aromatic ring, which amounts to 51.8 (1)°, and due to the sp 3-hybridized carbon atoms of the fixolide fragment. In the crystal, the mol-ecules are connected by H⋯S inter-actions with graph-set motif C(4), forming a mono-periodic hydrogen-bonded ribbon along [100]. The Hirshfeld surface analysis suggests that the major contributions for the crystal cohesion are [(R,S)-isomers considered separately] H⋯H (75.7%), H⋯S/S⋯H (11.6%), H⋯C/C⋯H (8.3% and H⋯N/N⋯H (4.4% for both of them).

Synthesis, crystal structure and Hirshfeld analysis of trans-bis-(2-{1-[(6R,S)-3,5,5,6,8,8-hexa-methyl-5,6,7,8-tetra-hydronaphthalen-2-yl]ethyl-idene}-N-methyl-hydrazinecarbo-thio-amidato-κ2N2,S)palladium(II) ethanol monosolvate.

The reaction between the (R,S)-fixolide 4-methyl-thio-semicarbazone and PdII chloride yielded the title compound, [Pd(C20H30N3S)2]·C2H6O {common name: trans-bis-[(R,S)-fixolide 4-methyl-thio-semicarbazonato-κ2 N 2 S]palladium(II) ethanol monosolvate}. The asymmetric unit of the title compound consists of one bis-thio-semicarbazonato PdII complex and one ethanol solvent mol-ecule. The thio-semicarbazononato ligands act as metal chelators with a trans configuration in a distorted square-planar geometry. A C-H⋯S intra-molecular inter-action, with graph-set motif S(6), is observed and the coordination sphere resembles a hydrogen-bonded macrocyclic environment. Additionally, one C-H⋯Pd anagostic inter-action can be suggested. Each ligand is disordered over the aliphatic ring, which adopts a half-chair conformation, and two methyl groups [s.o.f. = 0.624 (2):0.376 (2)]. The disorder includes the chiral carbon atoms and, remarkably, one ligand has the (R)-isomer with the highest s.o.f. value atoms, while the other one shows the opposite, the atoms with the highest s.o.f. value are associated with the (S)-isomer. The N-N-C(=S)-N fragments of the ligands are approximately planar, with the maximum deviations from the mean plane through the selected atoms being 0.0567 (1) and -0.0307 (8) Å (r.m.s.d. = 0.0403 and 0.0269 Å) and the dihedral angle with the respective aromatic rings amount to 46.68 (5) and 50.66 (4)°. In the crystal, the complexes are linked via pairs of N-H⋯S inter-actions, with graph-set motif R 2 2(8), into centrosymmetric dimers. The dimers are further connected by centrosymmetric pairs of ethanol mol-ecules, building mono-periodic hydrogen-bonded ribbons along [011]. The Hirshfeld surface analysis indicates that the major contributions for the crystal cohesion are [atoms with highest/lowest s.o.f.s considered separately]: H⋯H (81.6/82.0%), H⋯C/C⋯H (6.5/6.4%), H⋯N/N⋯H (5.2/5.0%) and H⋯S/S⋯H (5.0/4.9%).

Synthesis, crystal structure and Hirshfeld analysis of trans-bis-{(2E)-N-phenyl-2-[(2E)-3-phenyl-2-propen-1-yl-idene]hydrazinecarbo-thio-amidato-κ2N1,S}palladium(II).

The reaction of (2E)-N-phenyl-2-[(2E)-3-phenyl-2-propen-1-yl-idene]hydra-zine-carbo-thio-amide (common name: cinnamaldehyde-4-phenyl-thio-semi-carbazone) deprotonated with NaOH in ethanol with an ethano-lic suspension of PdII chloride in a 2:1 molar ratio yielded the title compound, [Pd(C16H14N3S)2]. The anionic ligands act as metal chelators, κ2 N 1 S-donors, forming five-membered rings with a trans-configuration. The PdII ion is fourfold coordinated in a slightly distorted square-planar geometry. For each ligand, one H⋯S and one H⋯N intra-molecular inter-actions are observed, with S(5) and S(6) graph-set motifs. Concerning the H⋯S inter-actions, the coordination sphere resembles a hydrogen-bonded macrocyclic environment-type. In the crystal, the complexes are linked via pairs of H⋯S inter-actions, with graph-set motif R 2 2(8), and building a mono-periodic hydrogen-bonded ribbon along [001]. The Hirshfeld surface analysis indicates that the major contributions for the crystal cohesion are: H⋯H (45.3%), H⋯C/C⋯H (28.0%), H⋯S/S⋯H (8.0%) and H⋯N/N⋯H (7.4%).

Similar hydrogen-bonded ribbons in three 4,4’-sulfonyldibenzoic anion/boric acid and tetrabutylammonium inclusion compounds

Three novel inclusion compounds of 4,4’-sulfonyldibenzoic anion, boric acid and tetrabutylammonium, 2[(C4H9)4N]+·[C14O6H8S]2−·3.5[B(OH)3]·1.5H2O (1), 2[(C4H9)4N]+·[C14O6H8S]2−·2[B(OH)3]·7H2O (2) and 1.5[(C4H9)4N]+·0.5[C14O6H9S]2−·0.5[C14O6H9S]−·2[B(OH)3] (3), were prepared and characterized by single crystal X-ray diffraction, IR spectroscopy and thermogravimetric analyses (TGA). Compound 1: triclinic system, P¯ 1, a = 9.371(3) Å, b = 17.624(5) Å, c = 18.678(6) Å, α = 92.471(3)°, β = 101.837(4)°, γ = 91.331(4)°, V = 3014.9(15) Å3, Z = 2, R1 = 0.0902; compound 2: orthorhombic, Pca21, a = 19.8104 Å, b = 9.2340 Å, c = 34.9875 Å, V = 6400.2(18) Å3, Z = 4, R1 = 0.0728; compound 3: triclinic, P¯ 1, a = 10.0088(1) Å, b = 13.2179(1) Å, c = 18.945(2) Å, α = 70.6850(1)°, β = 86.9100(1)°, γ = 71.3400(1)°, V = 2237.2(4) Å3, Z = 2, R1 = 0.0628. The results show that the host 4, 4’-sulfonyldibenzoic anion can combine with boric acid to form the similar hydrogen-bonded ribbons through O-H…O interactions in these three compounds. However, with the existence of the same guest template of tetrabutylammonium, the similar ribbons finally generate two sandwich-like layer frameworks of 1 and 2, and one 3D network containing cavities of 3. Clearly, the participation of water molecules should be mainly responsible for the distinct difference between the layer structure and the 3D network.

Structural similarity and similarity in thermal properties of the polymorphs: melting and crystallization from the melt of tolbutamide and chlorpropamide

The polymorphism of tolbutamide and chlorpropamide under melting/crystallization was investigated with using DSC and in situ X-ray powder diffraction. The asymmetry in thermal transformations was revealed for both substances. Under heating, all tolbutamide/chlorpropamide polymorphs transform into high-temperature IH/e polymorph, which melts at 128 °C. The crystal structures of the high-temperature polymorphs, IH and e, are very similar to each other in the unit cell parameters and in the arrangement of z-shaped infinite hydrogen-bonded ribbons. Under cooling, other polymorph crystallizes from the melt, V for tolbutamide and β for chlorpropamide, thus making easy the obtaining of these metastable polymorphs. The polymorphs of tolbutamide and chlorpropamide crystallized from their melts turned out to be also very similar to each other in their structures (space group, unit cell parameters, arrangement of π-shaped infinite hydrogen-bonded ribbons). Solid–solid transformation V ⇒ II in tolbutamide was detected both in samples stored under room conditions and those melted in capillaries, thus providing new easy way for II tolbutamide crystallization. In generalizing our results, one can expect that if evident similarity is found among the polymorphs of similar molecules in their crystal structure, the similarity in their thermal properties can be also found, and vice versa.

Crystal structure of 4-methyl-N-(4-methyl-benz-yl)benzene-sulfonamide.

The title compound, C15H17NO2S, was synthesized via a substitution reaction between 4-methyl-benzyl-amine and p-toluene-sulfonyl chloride. In the crystal, N-H⋯O hydrogen bonds link the mol-ecules, forming ribbons running along the b-axis direction. One of the aromatic rings hosts two inter-molecular C-H⋯π inter-actions that link these hydrogen-bonded ribbons into a three-dimensional network.

A new high-pressure benzocaine polymorph — towards understanding the molecular aggregation in crystals of an important active pharmaceutical ingredient (API)

Benzocaine (BZC), an efficient and highly permeable anaesthetic and an active pharmaceutical ingredient of many commercially available drugs, was studied under high pressure up to 0.78 GPa. As a result, new BZC polymorph (IV) was discovered. The crystallization of polymorph (IV) can be initiated by heating crystals of polymorph (I) at a pressure of at least 0.45 GPa or by their compression to 0.60 GPa. However, no phase transition from polymorph (I) to (IV) was observed. Although polymorph (IV) exhibits the same main aggregation motif as in previously reported BZC polymorphs (I)-(III), i.e. a hydrogen-bonded ribbon, its molecular packing and hydrogen-bonding pattern differ considerably. The N-H...N hydrogen bonds joining parallel BZC ribbons in crystals at ambient pressure are eliminated in polymorph (IV), and BZC ribbons become positioned at an angle of about 80°. Unfortunately, crystals of polymorph (IV) were not preserved on pressure release, and depending on the decompression protocol they transformed into polymorph (II) or (I).

Crystal structure and Hirshfeld surface analysis of new polymorph of racemic 2-phenyl-butyramide.

A new polymorph of the title compound, C10H13NO, was obtained by recrystallization of the commercial product from a water/ethanol mixture (1:1 v/v). Crystals of the previously reported racemic and homochiral forms of 2-phenyl-butyramide were grown from water-aceto-nitrile solution in 1:1 volume ratio [Khrustalev et al. (2014 ▸). Cryst. Growth Des. 14, 3360-3369]. While the previously reported racemic and enanti-opure forms of the title compound adopt very similar supra-molecular structures (hydrogen-bonded ribbons), the new racemic polymorph is stabilized by a single N-H⋯O hydrogen bond that links mol-ecules into chains along the c-axis direction with an anti-parallel (centrosymmetric) packing in the crystal. Hirshfeld mol-ecular surface analysis was employed to compare the inter-molecular inter-actions in the polymorphs of the title compound.

Isomorphism of inclusion compounds built with composite host lattices of thiadiazole and V-shaped molecules with the existence of tetrabutylammonium guest template

ABSTRACTBy using 4,4′-dihydroxydiphenylsulfone (BPS) and 4,4′-dihydroxydiphenylsulfide (BTS) react with amidinethiourea and tetrabutylammonium respectively, two isomorphs of inclusion compounds of (n-C4H9)4N+·C12H9O4S−·C2H4N4S (1) and (n-C4H9)4N+·C12H9O2S−·C2H4N4S (2) were prepared and characterized by Single crystal X-ray diffraction. Although two varied types of V-shaped molecules were selected to react in the actual experimental process, two isomorphs with similar packing modes were finally obtained. Interestingly, amidinothiourea molecule occurred in situ oxidation reaction to generate a new compound of 3,5-dimido-1,2,4,-thiadiazole during the experiments, and these two inclusion compounds here are the pioneer examples of thiadiazole and tetraalkylammonium and can be regarded as two isomorphs due to their similar crystallization modes. In these two isomorphs, thiadiazole molecules derived from amidinothiourea link with various V-type molecules to develop the similar dumbbell-type hydrogen-bonded ribbons by the alike hydrogen bonding modes, then the ribbons interpenetrate with tetrabutylammonium to result in two stable isomorphism structures.

Crystal structures and supra-molecular features of 9,9-dimethyl-3,7-di-aza-bicyclo-[3.3.1]nonane-2,4,6,8-tetra-one, 3,7-di-aza-spiro-[bi-cyclo-[3.3.1]nonane-9,1'-cyclo-penta-ne]-2,4,6,8-tetra-one and 9-methyl-9-phenyl-3,7-di-aza-bicyclo-[3.3.1]nonane-2,4,6,8-tetra-one di-methyl-formamide monosolvate.

Compounds (I), C9H10N2O4, (II), C11H12N2O4, and (III), C14H12N2O4·C3H7NO represent 9,9-disubstituted-3,7-di-aza-bicyclo-[3.3.1]nonane-2,4,6,8-tetra-one deriv-atives with very similar mol-ecular geometries for the bicyclic framework: the dihedral angle between the planes of the imide groups is 74.87 (6), 73.86 (3) and 74.83 (6)° in (I)-(III), respectively. The dimethyl derivative (I) is positioned on a crystallographic twofold axis and its overall geometry deviates only slightly from idealized C2v symmetry. The spiro-cyclo-pentane derivative (II) and the phen-yl/methyl analog (III) retain only inter-nal Cs symmetry, which in the case of (II) coincides with crystallographic mirror symmetry. The cyclo-pentane moiety in (II) adopts an envelope conformation, with the spiro C atom deviating from the mean plane of the rest of the ring by 0.548 (2) Å. In compound (III), an N-H⋯O hydrogen bond is formed with the di-methyl-formamide solvent mol-ecule. In the crystal, both (I) and (II) form similar zigzag hydrogen-bonded ribbons through double inter-molecular N-H⋯O hydrogen bonds. However, whereas in (I) the ribbons are formed by two trans-arranged O=C-N-H amide fragments, the amide fragments are cis-positioned in (II). The formation of ribbons in (III) is apparently disrupted by participation of one of its N-H groups in hydrogen bonding with the solvent mol-ecule. As a result, the mol-ecules of (III) form zigzag chains rather than the ribbons through inter-molecular N-H⋯O hydrogen bonds. The crystal of (I) was a pseudo-merohedral twin.

Hydrogen bond-directed assembly of silsesquioxanes cubes: synthesis of carboxylic acid POSS derivatives and the solid state structure of octa[2-(p-carboxyphenyl)ethyl] silsesquioxane

The octa[2-(p-carboxyphenyl)ethyl] and octa[2-(4-carboxy-1,1′-biphenyl)ethyl] silsesquioxane were synthesised under mild reaction conditions upon hydrogenolysis of the corresponding benzyl-ester derivatives. The octa[2-(p-carboxyphenyl)ethyl] silsesquioxane was shown to self-assemble upon formation of carboxylic acid dimers. The presence of eight carboxylic acid functional groups allowed to obtain an ordered silsesquioxane hybrid network. The X-ray crystal structures of the octa-ester and of the octa-acid were determined. The three-dimensional conformation of the ester provided an interpenetrated compact packing of the molecular building blocks without any specific supramolecular interaction. The two-dimensional character of the acid and the directionality of the hydrogen bond pattern of a dimer of acid led to the formation of hydrogen-bonded ribbons. It showed that functionalized silsesquioxane precursors capable of hydrogen bonding are of interest to generate nanostructured materials through self-organization processes. Moreover, the use of carboxylic acid groups is interesting not only because of their ability to form carboxyl dimer structures by hydrogen bonding but also because of their ability to form metal carboxylate derivatives that may lead to new organised hybrid metal organic silica frameworks.

N-H···S and C-H···S hydrogen bonds in two tetraalkylammonium dithiobiurea(1-) inclusion compounds.

Two inclusion compounds of dithiobiurea and tetrapropylammonium and tetrabutylammonium are characterized and reported, namely tetrapropylammonium carbamothioyl(carbamothioylamino)azanide, C12H28N(+)·C2H5N4S2(-), (1), and tetrabutylammonium carbamothioyl(carbamothioylamino)azanide, C16H36N(+)·C2H5N4S2(-), (2). The results show that in (1), the dithiobiurea anion forms a dimer via N-H···N hydrogen bonds and the dimers are connected into wide hydrogen-bonded ribbons. The guest tetrapropylammonium cation changes its character to become the host molecule, generating pseudo-channels containing the aforementioned ribbons by C-H···S contacts, yielding the three-dimensional network structure. In comparison, in (2), the dithiobiurea anions are linked via N-H···S interactions, producing one-dimensional chains which pack to generate two-dimensional hydrogen-bonded layers. These layers accommodate the guest tetrabutylammonium cations, resulting in a sandwich-like layer structure with host-guest C-H···S contacts.

The Power of Nonconventional Phenyl C–H···N Hydrogen Bonds: Supportive Crystal-Packing Force and Dominant Supramolecular Engineering Force

The role of phenyl C–H···N interactions in crystal engineering is explored with a variety of fluorinated phenyl-containing compounds. In particular, we show that this interaction can guide the formation of one-dimensional phenyl C–H···N hydrogen-bonded ribbons with, for example, 4-(2,3,5,6-tetrafluorophenylethynyl)pyridine. The interaction is shown to also control the formation of self-complementary homodimers with 3-(2,3,4,5-tetrafluorophenylethynyl)pyridine. We also demonstrate that the phenyl C–H···N hydrogen bond interaction is capable of enticing co-crystallization of molecules such as 2,3,5,6,2′,3′,5′,6′-octafluorobiphenyl and 4,4′-dipyridyl. Finally, we describe the use of an intramolecular scaffold to evaluate the effect of electron-withdrawing substituents on the strength of a phenyl C–H···N hydrogen bond.

Ethyl (4-benzyloxyphenyl)-6-methyl-2-sulfanylidene-1,2,3,4-tetrahydropyrimidine-5-carboxylate and a redetermination of ethyl (4RS)-4-(4-methoxyphenyl)-6-methyl-2-sulfanylidene-1,2,3,4-tetrahydropyrimidine-5-carboxylate, as its 0.105-hydrate, both at 200 K: subtly different hydrogen-bonded ribbons.

Two sulfanylidene-1,2,3,4-tetrahydropyrimidine derivatives have been synthesized using acid-catalysed cyclocondensation reactions between thiourea, ethyl 3-oxobutanoate and substituted benzaldehydes. In each of ethyl (4RS)-4-(4-benzyloxyphenyl)-6-methyl-2-sulfanylidene-1,2,3,4-tetrahydropyrimidine-5-carboxylate, C21H22N2O3S, (I), where Z' = 2, and ethyl (4RS)-4-(4-methoxyphenyl)-6-methyl-2-sulfanylidene-1,2,3,4-tetrahydropyrimidine-5-carboxylate 0.105-hydrate, C15H18N2O3S·0.105H2O, (II), the reduced pyrimidine ring adopts a conformation intermediate between the boat, screw-boat and twist-boat forms. In (I) and (II), a combination of N-H...O and N-H...S hydrogen bonds links the organic molecules into ribbons containing alternating R2(2)(8) and R4(4)(20) rings. In (I), the ribbon contains three types of ring, viz. two different R2(2)(8) rings which are both centrosymmetric and R4(4)(20) rings which are not centrosymmetric. In (II), the ribbon contains two types of ring, both of which are centrosymmetric. In compound (II), the ribbons enclose continuous channels which run along the twofold rotation axes in the space group C2/c, and the partial-occupancy water molecules lie within these channels. Structural comparisons are made with a number of related compounds.

Crystal Structures of New Ammonium 5-Aminotetrazolates.

The crystal structures of three salts of anionic 5-aminotetrazole are described. The tetramethylammonium salt (P) forms hydrogen-bonded ribbons of anions which accept weak C–H⋯N contacts from the cations. The cystamine salt (C2/c) shows wave-shaped ribbons of anions linked by hydrogen bonds to screw-shaped dications. The tetramethylguanidine salt (P21/c) exhibits layers of anions hydrogen-bonded to the cations.

High-Pressure-Induced Polymorphic Transformation of Maleic Hydrazide

Maleic hydrazide, a unique example of polymorphic structures, was analyzed at pressure up to 5 GPa using in situ high-pressure Raman scattering and synchrotron X-ray diffraction techniques. Changes in the Raman spectra at 2 GPa indicate that a pressure-induced phase transition is occurring. The transition was further analyzed with angle dispersive X-ray diffraction, which demonstrated that maleic hydrazide underwent a polymorphic transformation from the form III to the form II. Moreover, the observed transformation was partially reversible when the system was brought back to ambient pressure. This work suggests that the high-pressure polymorphic transformation is caused by changes in the hydrogen-bonded ribbons which lead to supramolecular rearrangements in the crystal structure.

Infrared spectroscopic studies on 4-amino-6-oxopyrimidine in a low-temperature Xe matrix and crystalline polymorphs composed of double hydrogen-bonded ribbons

Infrared (IR) spectra of the enol and keto forms of 4-amino-6-oxopyrimidine (AOP) isolated in a low-temperature Xe matrix were recorded, where the change from the keto to the enol form was found to be induced by UV irradiation (λ>270nm). On the other hand, the hydrated crystal of AOP exhibited a similar IR spectrum to the anhydrous crystal by dehydration, suggesting that the dehydrated and anhydrous crystals are polymorphs. It has been found from the IR spectral analyses that the AOP crystal is dominated by infinite double H-bonded ribbons, which has been supported by quantum chemical calculations.

Binary co-crystals of the active pharmaceutical ingredient 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene and camphoric acid

Co-crystals comprising the active pharmaceutical ingredient 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene, C12H10N4, and the chiral co-formers (+)-, (-)- and (rac)-camphoric acid (cam), C10H16O4, have been synthesized. Two different stoichiometries of the API and co-former are obtained, namely 1:1 and 3:2. Crystallization experiments suggest that the 3:2 co-crystal is kinetically favoured over the 1:1 co-crystal. Single-crystal X-ray diffraction analysis of the co-crystals reveals N-H...O hydrogen bonding as the primary driving force for crystallization of the supramolecular structures. The 1:1 co-crystal contains undulating hydrogen-bonded ribbons, in which the chiral cam molecules impart a helical twist. The 3:2 co-crystal contains discrete Z-shaped motifs comprising three molecules of the API and two molecules of cam. The 3:2 co-crystals with (+)-cam, (-)-cam (space group P21) and (rac)-cam (space group P21/n) are isostructural. The enantiomeric co-crystals contain pseudo-symmetry consistent with space group P21/n, and the co-crystal with (rac)-cam represents a solid solution between the co-crystals containing (+)-cam and (-)-cam.