Hydrogels For Delivery Research Articles

Oral delivery of pectin-chitosan hydrogels entrapping macrophage-targeted curcumin-loaded liposomes for the treatment of ulcerative colitis

The oral delivery of anti-inflammatory drugs has been a promising strategy for enhancing the clinical efficacy of ulcerative colitis (UC) treatment strategies. However, achieving site specific drug delivery to colon tissues and target cells is a challenging task for formulation scientists. In this study, macrophages-targeted liposome-loaded pectin-chitosan hydrogels were developed for UC treatment via oral administration. Folate-functionalized cholesterol was synthesized as lipid membrane materials for the liposomes containing curcumin (CUR). The incorporation of the liposomal CUR within pectin-chitosan hydrogels resulted in a matrix that exhibited considerable sensitivity to colonic enzymes during in vitro release. The targeted delivery of hybrids was able to effectively reach macrophages. They also showed enhanced capability to downregulate TNF-α, IL-6, and IL-1β in the lipopolysaccharide-induced Raw 264.7 cells model. DSS-induced mice modelshowed improved anti-UC effects, including accelerated mucosal repair and decreased inflammation and modulate the immune balance in the intestinal tissue of mice with colitis, which may be attributable to increased drug accumulation in the colonic lumen and improved internalization to target cells. Therefore, the incorporation of folate-modified liposomes containing CUR and pectin-chitosan physical hydrogels could potentially serve as a favorable approach for treating UC through an oral colon-targeted drug delivery system.

Stimuli-Responsive Hydrogels for Protein Delivery.

Proteins and peptides are potential therapeutic agents, but their physiochemical properties make their use as drug substances challenging. Hydrogels are hydrophilic polymeric networks that can swell and retain high amounts of water or biological fluids without being dissolved. Due to their biocompatibility, their porous structure, which enables the transport of various peptides and proteins, and their protective effect against degradation, hydrogels have gained prominence as ideal carriers for these molecules' delivery. Particularly, stimuli-responsive hydrogels exhibit physicochemical transitions in response to subtle modifications in the surrounding environment, leading to the controlled release of entrapped proteins or peptides. This review is focused on the application of these hydrogels in protein and peptide delivery, including a brief overview of therapeutic proteins and types of stimuli-responsive polymers.

Porous silicon embedded in a thermoresponsive hydrogel for intranasal delivery of lipophilic drugs to treat rhinosinusitis

Intranasal delivery is the most preferred route of drug administration for treatment of a range of nasal conditions including chronic rhinosinusitis (CRS), caused by an infection and inflammation of the nasal mucosa. However, localised delivery of lipophilic drugs for persistent nasal inflammation is a challenge especially with traditional topical nasal sprays. In this study, a composite thermoresponsive hydrogel is developed and tuned to obtain desired rheological and physiochemical properties suitable for intranasal administration of lipophilic drugs. The composite is comprised of drug-loaded porous silicon (pSi) particles embedded in a poloxamer 407 (P407) hydrogel matrix. Mometasone Furoate (MF), a lipophilic corticosteroid (log P of 4.11), is used as the drug, which is loaded onto pSi particles at a loading capacity of 28 wt%. The MF-loaded pSi particles (MF@pSi) are incorporated into the P407-based thermoresponsive hydrogel (HG) matrix to form the composite hydrogel (MF@pSi-HG) with a final drug content ranging between 0.1 wt% to 0.5 wt%. Rheomechanical studies indicate that the MF@pSi component exerts a minimal impact on gelation temperature or strength of the hydrogel host. The in-vitro release of the MF payload from MF@pSi-HG shows a pronounced increase in the amount of drug released over 8 h (4.5 to 21-fold) in comparison to controls consisting of pure MF incorporated in hydrogel (MF@HG), indicating an improvement in kinetic solubility of MF upon loading into pSi. Ex-vivo toxicity studies conducted on human nasal mucosal tissue show no adverse effect from exposure to either pure HG or the MF@pSi-HG formulation, even at the highest drug content of 0.5 wt%. Experiments on human nasal mucosal tissue show the MF@pSi-HG formulation deposits a quantity of MF into the tissues within 8 h that is >19 times greater than the MF@HG control (194 ± 7 μg of MF/g of tissue vs. <10 μg of MF/g of tissue, respectively).

A Metal-Organic Framework-Incorporated Hydrogel for Delivery of Immunomodulatory Neobavaisoflavone to Promote Cartilage Regeneration in Osteoarthritis.

The treatment of osteoarthritis (OA)-related cartilage defects is a great clinical challenge due to the complex pathogenesis of OA and poor self-repair ability of cartilage tissue. Combining local and long-term anti-inflammatory therapies to promote cartilage repair is an effective method to treat OA. In this study, a zinc-organic framework-incorporated extracellular matrix (ECM)-mimicking hydrogel platform was constructed for the inflammatory microenvironment-responsive delivery of neobavaisoflavone (NBIF) to promote cartilage regeneration in OA. The NBIF was encapsulated in situ in zeolitic imidazolate frameworks (ZIF-8 MOFs). The NBIF@ZIF-8 MOFs were decorated with polydopamine and incorporated into a methacrylate gelatin/hyaluronic acid hybrid network to form the NBIF@ZIF-8/PHG hydrogel. The hydrogel featured excellent cell/tissue affinity, providing a favorable microenvironment for recruiting cells and cytokines to the defect sites. The hydrogel enabled the on-demand NBIF released in response to a weakly acidic microenvironment at the injured joint site to resolve inflammatory responses during the early stages of OA. Consequently, the cooperativity of the loaded NBIF and hydrogel synergistically modulated the immune response and assisted in cartilage defect repair. In summary, the NBIF@ZIF-8/PHG hydrogel delivery platform represents an effective treatment strategy for OA-related cartilage defects and may attract attentions for applications in other inflammatory diseases.

Hydrogel containing mPEG-PLGA nanoparticles for the vaginal delivery of saquinavir mesylate against HIV infection

Saquinavir mesylate (SQV) is a protease inhibitor commonly employed for the treatment of human immunodeficiency virus-1 infection. It is generally administered orally as tablets in combination with other antiviral drugs. Another promising route of administration can be represented by the vaginal one through topically applied formulations. This delivery can reduce the first-pass effect in the case of systemic drug adsorption or prevent HIV infection. We propose the formulation of a Carbopol® 974 (C974) hydrogel containing biodegradable mPEG-PL(L)GA nanoparticles (NPs) for the vaginal delivery of SQV, intended both as a prevention and a therapeutic strategy. mPEG-PL(L)GA NPs were incorporated into the C974 polymeric matrix, leading to a reduction of the hydrogel consistency dependent on NPs and C974 concentrations. Despite the moderate drug loading into NPs, the presence of the NPs had an impact on the in vitro release of the drug from the hydrogel at pH 5.5 using immersion cells. A higher amount of the drug was released, probably due to the effect of NPs in promoting the incorporation of the drug into the hydrogel at a high SQV dose. These findings can be useful for the development of topically applied hydrogels for SQV delivery, possibly having improved in vivo therapeutic outcomes.

PH-responsive multi-network composite cellulose-based hydrogels for stable delivery of oral IgY-Fab fragments

Yolk immunoglobulin (IgY) is perfect supplement to mammalian immunoglobulin G in passive immune protection but with poor delivery stability. This work succeeded in pH-responsive oral delivery of IgY-Fab fragments with cellulose based multi-network composite hydrogels. Data displayed that the hydrogel 2 showed superior mechanical properties and load performance (encapsulation efficiency of 99.25% and loading capacity of 45.11 mg/100 mg). The stability of the released Fab was confirmed by HPLC with Fab purity up to 79.65% at the end of digestion. The FTIR spectra revealed the potential interactions between Fab and the hydrogel matrix of the formation of hydrogen bonds or electrostatic interactions between the groups of -OH, -CH2, and -COO−. The excellent rehydration of the hydrogels wouldn't be impacted by low-temperature freeze drying. In sum, this work is of great significance to the development of Fab-themed health-care food, intensive processing of poultry eggs and the economic construction of related industries.

Effects of Cell-Adhesive Ligand Presentation on Pentapeptide Supramolecular Assembly and Gelation: Simulations and Experiments

The extracellular matrix (ECM) is a complex, hierarchical material containing structural and bioactive components. This complexity makes decoupling the effects of biomechanical properties and cell-matrix interactions difficult, especially when studying cellular processes in a 3D environment. Matrix mechanics and cell adhesion are both known regulators of specific cellular processes such as stem cell proliferation and differentiation. However, more information is required about how such variables impact various neural lineages that could, upon transplantation, therapeutically improve neural function after a central nervous system injury or disease. Rapidly Assembling Pentapeptides for Injectable Delivery (RAPID) hydrogels are one biomaterial approach to meet these goals, consisting of a family of peptide sequences that assemble into physical hydrogels in physiological media. In this study, we studied our previously reported supramolecularly-assembling RAPID hydrogels functionalized with the ECM-derived cell-adhesive peptide ligands RGD, IKVAV, and YIGSR. Using molecular dynamics simulations and experimental rheology, we demonstrated that these integrin-binding ligands at physiological concentrations (3–12 m<sc>m</sc>) did not impact the assembly of the KYFIL peptide system. In simulations, molecular measures of assembly such as hydrogen bonding and pi-pi interactions appeared unaffected by cell-adhesion sequence or concentration. Visualizations of clustering and analysis of solvent-accessible surface area indicated that the integrin-binding domains remained exposed. KYFIL or AYFIL hydrogels containing 3 m<sc>m</sc> of integrin-binding domains resulted in mechanical properties consistent with their non-functionalized equivalents. This strategy of doping RAPID gels with cell-adhesion sequences allows for the precise tuning of peptide ligand concentration, independent of the rheological properties. The controllability of the RAPID hydrogel system provides an opportunity to investigate the effect of integrin-binding interactions on encapsulated neural cells to discern how hydrogel microenvironment impacts growth, maturation, or differentiation.

A Photocurable Polysaccharide-Based Hydrogel Delivery of Polydeoxyribonucleotide-Loaded Vectors for Wound Treatment.

The wounds caused by war, accidents, and diseases require timely and effective treatment. Polysaccharides, as natural macromolecules, have good biocompatibility and unique functions, and are excellent substrates for constructing new wound dressings. Short-chain chitosan (SCS) has good water solubility and, importantly, retains a large number of active amino groups. We first introduce double bonds to SCS. This chitosan derivative can be entangled with sodium alginate (SA) through electrostatic interaction. The flowing sol can be applied to a wound with an irregular shape. Under the initiation of a photoinitiator, the internal double bonds are broken and cross-linked to form a gel. The prepared hydrogel wound dressing exhibited good antibacterial properties and can provide a microenvironment conducive to wound repair. A polydeoxyribonucleotide (PDRN) has been proven to have encouraging therapeutic effects for wound healing. PDRN can be condensed by branched polyethylenimine (PEI) to form a nucleic acid delivery system, which can be efficiently uptaken by cells. The cooperation of hydrogel and nucleic-acid-based therapy presented good results in a mouse full-thickness skin wound model.

MPEG-CS-modified flexible liposomes-reinforced thermosensitive sol-gel reversible hydrogels for ocular delivery of multiple drugs with enhanced synergism

Non-invasive drug delivery offers a safe treatment while improving patient compliance. However, due to the particular physiological structure of the ocular, long-term retention and sustained drug release of the drug delivery system is crucial. Herein, this study aimed to design mPEG-CS-modified flexible liposomes-reinforced thermosensitive sol-gel reversible hydrogels (mPEG-CS-FL-TSG) for the delivery of astragaloside IV (AS-IV) and tetramethylpyrazine (TMP) to treat age-related macular degeneration. In vitro biological properties of mPEG-CS-FL and mPEG-CS-FL-TSG showed that they could be successfully taken up by ARPE-19 cells, and the uptake rate of mPEG-CS-FL-TSG was higher. Not only that, the release rate of mPEG-CS-FL-TSG was slower. More significantly, the results showed that the cytotoxicity of mPEG-CS-FL-TSG was lower than that of mPEG-CS-FL. In vivo result revealed that the drug delivery system could prominently enhance the ocular bioavailability of AS-IV and TMP, which is the enhanced synergism of well-permeable liposome and slow-releasing hydrogel. In summary, the mPEG-CS-FL-TSG can compensate for the short retention time and sudden release of liposome, as well as the low drug penetration of hydrogel, in order to show great promise in the non-invasive delivery of multiple drugs for the treatment of posterior ocular diseases.

Articular Cartilage Regeneration via Induced Chondrocyte Autophagy by Sustained Release of Leptin Inhibitor from Thermo-Sensitive Hydrogel through STAT3/REDD1/mTORC1 Cascade.

The pathophysiology of osteoarthritis (OA) is closely linked to autophagy abnormalities in articular chondrocytes, the sole mature cell type in healthy cartilage. Nevertheless, the precise molecular mechanism remains uncertain. Previous research has demonstrated that leptin activates mTORC1, thereby inhibiting chondrocyte autophagy during the progression of OA. In this study, it is demonstrated that the presence of leptin induces a substantial increase in the expression of STAT3, leading to a notable decrease in REDD1 expression and subsequent phosphorylation of p70S6K, a recognized downstream effector of mTORC1. Conversely, inhibition of leptin yields contrasting effects. Additionally, the potential advantages of utilizing a sustained intra-articular release of a leptin inhibitor (LI) via an injectable, thermosensitive poly(D,L-lactide)-poly(ethylene glycol)-poly(D,L-lactide) (PDLLA-PEG-PDLLA: PLEL) hydrogel delivery system for the purpose of investigating its impact on cartilage repair are explored. The study conducted on LI-loaded PLEL (PLEL@LI) demonstrates remarkable efficacy in inhibiting OA and displays encouraging therapeutic advantages in the restoration of subchondral bone and cartilage. These findings establish a solid foundation for the advancement of a pioneering treatment approach utilizing PLEL@LI for OA.

A Closed Loop Stimuli-Responsive Concanavalin A-Loaded Chitosan-Pluronic Hydrogel for Glucose-Responsive Delivery of Short-Acting Insulin Prototyped in RIN-5F Pancreatic Cells.

The optimal treatment of diabetes (in particular, type 1 diabetes-T1D) remains a challenge. Closed-loop systems (implants/inserts) provide significant advantages for glucose responsivity and providing real-time sustained release of rapid-acting insulin. Concanavalin A (ConA), a glucose affinity agent, has been used to design closed-loop insulin delivery systems but not without significant risk of leakage of ConA from the matrices and poor mechanical strength of the hydrogels impacting longevity and control of insulin release. Therefore, this work focused on employing a thermoresponsive co-forming matrix between Pluronic F-127 (PL) and structurally robust chitosan (CHT) via EDC/NHS coupling (i.e., covalent linkage of -NH2 from CHT and ConA to the -COOH of PL). The system was characterized for its chemical structure stability and integrity (FTIR, XRD and TGA), injectability, rheological parameters and hydrogel morphology (Texture Analysis, Elastosens TM Bio2 and SEM). The prepared hydrogels demonstrated shear-thinning for injectability with a maximum force of 4.9 ± 8.3 N in a 26G needle with sol-gel transitioning from 25 to 38 °C. The apparent yield stress value of the hydrogel was determined to be 67.47 Pa. The insulin loading efficiency within the hydrogel matrix was calculated to be 46.8%. Insulin release studies revealed glucose responsiveness in simulated glycemic media (4 and 10 mg/mL) over 7 days (97%) (305 nm via fluorescence spectrophotometry). The MTT studies were performed over 72 h on RIN-5F pancreatic cells with viability results >80%. Results revealed that the thermoresponsive hydrogel is a promising alternative to current closed-loop insulin delivery systems.

Injectable Thermosensitive Hyaluronic Acid Hydrogels for Chondrocyte Delivery in Cartilage Tissue Engineering.

In this study, we synthesize a hyaluronic acid-g-poly(N-isopropylacrylamide) (HPN) copolymer by grafting the amine-terminated poly(N-isopropylacrylamide) (PNIPAM-NH2) to hyaluronic acid (HA). The 5% PNIPAM-NH2 and HPN polymer solution is responsive to temperature changes with sol-to-gel phase transition temperatures around 32 °C. Compared with the PNIPAM-NH2 hydrogel, the HPN hydrogel shows higher water content and mechanical strength, as well as lower volume contraction, making it a better choice as a scaffold for chondrocyte delivery. From an in vitro cell culture, we see that cells can proliferate in an HPN hydrogel with full retention of cell viability and show the phenotypic morphology of chondrocytes. In the HPN hydrogel, chondrocytes demonstrate a differentiated phenotype with the upregulated expression of cartilage-specific genes and the enhanced secretion of extracellular matrix components, when compared with the monolayer culture on tissue culture polystyrene. In vivo studies confirm the ectopic cartilage formation when HPN was used as a cell delivery vehicle after implanting chondrocyte/HPN in nude mice subcutaneously, which is shown from a histological and gene expression analysis. Taken together, the HPN thermosensitive hydrogel will be a promising injectable scaffold with which to deliver chondrocytes in cartilage-tissue-engineering applications.

Biomineralized Polydopamine Nanoparticle-Based Sodium Alginate Hydrogels for Delivery of Anti-serine/Threonine Protein Kinase B-Rapidly Accelerated Fibrosarcoma siRNA for Metastatic Melanoma Therapy.

Malignant melanoma, as a highly aggressive skin cancer, is strongly associated with mutations in serine/threonine protein kinase B-RAF (BRAF, where RAF stands for rapidly accelerated fibrosarcoma). Targeted therapy with anti-BRAF small interfering RNA (siBRAF) represents a crucial aspect of metastatic melanoma treatment. In this study, an injectable hydrogel platform based on sodium alginate (SA), with multifunctions of photothermal and Ca2+-overload cell apoptosis, was explored as a siBRAF carrier for metastatic melanoma therapy. We employed polydopamine nanoparticles (PDAs) as a photothermal core and constructed a calcium phosphate (CaP) shell via biomineralization (PDA@CaP) to load siBRAF (PDA@siBRAF/CaP). The pH-sensitive CaP shell facilitated the release of Ca2+ under the weakly acidic tumor microenvironment, triggering the gelation of PDA@siBRAF/CaP-SA to localized release siBRAF at tumor sites with the interruption of the RAS-RAF-MEK-ERK (MAPK) pathway. Besides, the continuous release of Ca2+ could also lead to Ca2+-overload cell apoptosis. Moreover, the photothermal effect of PDA regulated the release kinetics, resulting in coordinated therapeutic abilities of individual components in the PDA@siBRAF/CaP-SA hydrogels. Consequently, the effective inhibition of tumor growth and metastasis was achieved in vitro and in vivo using a highly metastatic melanoma cell line B16F10 as the model, by combining photothermal ablation, Ca2+ overload, and BRAF silencing. Our work provides a proof-of-concept for an injectable hydrogel system that simultaneously targets multiple mechanisms involved in melanoma progression and has the potential to be translated into clinical use for the metastatic melanoma therapy.

Semi‐solid 3D printing of mesoporous silica nanoparticle‐incorporated xeno‐free nanomaterial hydrogels for protein delivery

AbstractMultifunctional biomaterial inks are in high demand for adapting hydrogels in biomedical applications through three‐dimensional (3D) printing. Our previously developed xeno‐free system consisting of anionic cellulose nanofibers (T‐CNF) and methacrylated galactoglucomannan (GGMMA) as a photo(bio)polymer provides high‐performance ink fidelity in extrusion‐based 3D printing. The fusion between nanoparticles and this biomaterial‐ink system is a promising yet challenging avenue worth exploring, due to the colloidal stability of T‐CNF being sensitive to electrostatic interactions. Mesoporous silica nanoparticles (MSNs), with their robust ceramic matrix and fine‐tunable surface chemistries, are well‐established nanocarriers for different biologicals. Here, we fabricated MSNs with different surface modifications resulting in a net surface charge ranging from highly negative to highly positive to develop printable MSNs‐laden nanocomposite biomaterial inks. We utilized rheology as a comprehensive tool to address the matrix interactions with differently surface‐charged MSNs. Fluorescently labeled bovine serum albumin (FITC‐BSA) was used as a model protein for MSN loading, whereby negatively or neutral‐charged MSNs were found suitable to formulate FITC‐BSA‐loaded biomaterial inks of T‐CNF/GGMMA. Depending on the particles’ surface charge, FITC‐BSA showed different release profiles and preserved its stability after release. Lastly, the proof‐of‐concept to deliver large‐sized biological cargo with MSN‐laden nanocomposite biomaterial inks was established via the 3D printing technique.

Injectable hydrogel for sustained delivery of progranulin derivative Atsttrin in treating diabetic fracture healing

Hydrogels with long-term storage stability, controllable sustained-release properties, and biocompatibility have been garnering attention as carriers for drug/growth factor delivery in tissue engineering applications. Chitosan (CS)/Graphene Oxide (GO)/Hydroxyethyl cellulose (HEC)/β-glycerol phosphate (β-GP) hydrogel is capable of forming a 3D gel network at physiological temperature (37 °C), rendering it an excellent candidate for use as an injectable biomaterial. This work focused on an injectable thermo-responsive CS/GO/HEC/β-GP hydrogel, which was designed to deliver Atsttrin, an engineered derivative of a known chondrogenic and anti-inflammatory growth factor-like molecule progranulin. The combination of the CS/GO/HEC/β-GP hydrogel and Atsttrin provides a unique biochemical and biomechanical environment to enhance fracture healing. CS/GO/HEC/β-GP hydrogels with increased amounts of GO exhibited rapid sol-gel transition, higher viscosity, and sustained release of Atsttrin. In addition, these hydrogels exhibited a porous interconnected structure. The combination of Atsttrin and hydrogel successfully promoted chondrogenesis and osteogenesis of bone marrow mesenchymal stem cells (bmMSCs) in vitro. Furthermore, the work also presented in vivo evidence that injection of Atsttrin-loaded CS/GO/HEC/β-GP hydrogel stimulated diabetic fracture healing by simultaneously inhibiting inflammatory and stimulating cartilage regeneration and endochondral bone formation signaling pathways. Collectively, the developed injectable thermo-responsive CS/GO/HEC/βG-P hydrogel yielded to be minimally invasive, as well as capable of prolonged and sustained delivery of Atsttrin, for therapeutic application in impaired fracture healing, particularly diabetic fracture healing.

Molecularly engineered dual-network photothermal hydrogel delivery system with enhanced mechanical properties, antibacterial ability and angiogenic effect for accelerating wound healing

Bacterial infection caused by trauma and chronic wounds in the most mobile area remains a challenge in clinic. It is difficult to achieve the synergistic effects of antibacterial capacity and skin regeneration using conventional therapeutic methods. Developing a multi-functional hydrogel dressing that can cope with the complex wound environment will contribute to the healing and therapeutic effects. In this work, a novel Cur@PAM/TA-Cu photothermal hydrogel delivery system was prepared by engineering tannic acid (TA) into covalent cross-linked polyacrylamide (PAM) on which the chelating tannic acid-copper metal–polyphenolic network (TA-Cu MPN) was imposed to form dual-crosslinked networks, and the natural medicine curcumin was loaded eventually. The molecularly engineered dual-crosslinked networks resulted in enhanced mechanical properties including bio-adhesion, tensile strength and self-healing, which made the hydrogel suitable for dynamic wound and various application scenarios. In addition, the excellent photothermal capacity, antioxidant effect and biocompatibility of the hydrogel were demonstrated. Notably, this curcumin loaded photothermal hydrogel exhibited superior antibacterial capacity (almost 100% killing ratio to E. coli and S. aureus) under 808 nm laser irradiation. Meanwhile, the in vivo wound healing experiment results revealed that the anti-inflammation and proangiogenic effect of Cur@PAM/TA-Cu hydrogel successfully shortened the healing time of wound and the reconstruction of skin structure and function. Thus, this dual-crosslinked multi-functional hydrogel delivery system is a promising wound dressing for accelerating wound healing.

Photo-crosslinking modified sodium alginate hydrogel for targeting delivery potential by NO response

In recent years, the incidence of inflammatory bowel disease has gradually increased. Traditional drugs can reduce inflammation, but cannot be targeting released and often require the coordination with delivery systems. However, a good targeting performance delivery system is still scarce currently. Inflammation can trigger oxidative stress, producing large amounts of oxides such as nitric oxide (NO). Based on this, the present experiment innovatively designed a hydrogel delivery system with NO response that could be inflammation targeting. The hydrogel is composed of sodium alginate modified with glycerol methacrylate, crosslinked with NO response agent by photo-crosslinking method, which have low swelling (37 %) and good mechanical properties with a stable structure even at 55 °C. The results of in vitro digestion also indicated that the hydrogel had a certain tolerance to gastrointestinal digestion. And in the NO environment, it was interestingly found that the structure and mechanical properties of the hydrogels changed significantly. Moreover, hydrogels have good biocompatibility, which ensures their safe use in vivo. In conclusion, this NO-responsive-based delivery system is feasible and provides a new approach for drugs and active factors targeting delivery in the future.

Sustained Release of Neuroprotective Drugs Curcumin and Edaravone from Supramolecular Hydrogel for Ischemic Stroke Treatment

AbstractIschemic stroke is a major cause of death and disability worldwide. The poor drug delivery to cerebral ischemic regions remains a challenging issue for ischemic stroke treatment. Curcumin (Cur) and edaravone (EDV) show remarkable therapeutic effects on ischemic stroke. However, the short half‐life and poor aqueous solubility limit their application for long‐term and effective neuroprotection. Cur and EDV with a well‐studied hydrogelator Nap‐Phe‐Phe‐Tyr‐OH (NapFFY) is co‐assembled to prepare a novel supramolecular peptide hydrogel EDV/Cur/NapFFY, which can improve their bioavailability and transport the hydrophobic drugs to ischemic sites precisely by local administration. In vitro release test demonstrate that co‐assembly with NapFFY enables continuous release of Cur and EDV for about two weeks. Animal studies found that EDV/Cur/NapFFY hydrogel can effectively promote brain plasticity and enhance the functional recovery on the photothrombotic mouse model. Overall, the work reveales the great application potential of supramolecular peptide hydrogel delivery system EDV/Cur/NapFFY in promoting repair and recovery of ischemic stroke.

Magnetic-Responsive Liposomal Hydrogel Membranes for Controlled Release of Small Bioactive Molecules-An Insight into the Release Kinetics.

This work explores the unique features of magnetic-responsive hydrogels to obtain liposomal hydrogel delivery platforms capable of precise magnetically modulated drug release based on the mechanical responses of these hydrogels when exposed to an external magnetic field. Magnetic-responsive liposomal hydrogel delivery systems were prepared by encapsulation of 1,2-dipalmitoyl-sn-glycero-3-phosphocoline (DPPC) multilayered vesicles (MLVs) loaded with ferulic acid (FA), i.e., DPPC:FA liposomes, into gelatin hydrogel membranes containing dispersed iron oxide nanoparticles (MNPs), i.e., magnetic-responsive gelatin. The FA release mechanisms and kinetics from magnetic-responsive liposomal gelatin were studied and compared with those obtained with conventional drug delivery systems, e.g., free liposomal suspensions and hydrogel matrices, to access the effect of liposome entrapment and magnetic field on FA delivery. FA release from liposomal gelatin membranes was well described by the Korsmeyer-Peppas model, indicating that FA release occurred under a controlled diffusional regime, with or without magnetic stimulation. DPPC:FA liposomal gelatin systems provided smoother controlled FA release, relative to that obtained with the liposome suspensions and with the hydrogel platforms, suggesting the promising application of liposomal hydrogel systems in longer-term therapeutics. The magnetic field, with low intensity (0.08 T), was found to stimulate the FA release from magnetic-responsive liposomal gelatin systems, increasing the release rates while shifting the FA release to a quasi-Fickian mechanism. The magnetic-responsive liposomal hydrogels developed in this work offer the possibility to magnetically activate drug release from these liposomal platforms based on a non-thermal related delivery strategy, paving the way for the development of novel and more efficient applications of MLVs and liposomal delivery systems in biomedicine.

Polymer based dual drug delivery system for targeted treatment of fluoroquinolone resistant Staphylococcus aureus mediated infections

The present study attempts to treat S. aureus-induced soft skin infections using a combinatorial therapy with an antibiotic, Ciprofloxacin (CIP), and an efflux pump inhibitor 5-Nitro-2-(3-phenylpropoxy) pyridine (5-NPPP) through a smart hydrogel delivery system. The study aims to reduce the increasing rates of infections and antimicrobial resistance; therefore, an efflux pump inhibitor molecule is synthesized and delivered along with an antibiotic to re-sensitize the pathogen towards antibiotics and treat the infections. CIP-loaded polyvinyl alcohol (PVA) hydrogels at varying concentrations were fabricated and optimized by a chemical cross-linking process, which exhibited sustained drug release for 5 days. The compound 5-NPPP loaded hydrogels provided linear drug release for 2 days, necessitating the need for the development of polymeric nanoparticles to alter the release drug pattern. 5-NPPP loaded Eudragit RSPO nanoparticles were prepared by modified nanoprecipitation—solvent evaporation method, which showed optimum average particle size of 230–280 nm with > 90% drug entrapment efficiency. The 5-NPPP polymeric nanoparticles loaded PVA hydrogels were fabricated to provide a predetermined sustained release of the compound to provide a synergistic effect. The selected 7% PVA hydrogels loaded with the dual drugs were evaluated using Balb/c mice models induced with S. aureus soft skin infections. The results of in vivo studies were evidence that the dual drugs loaded hydrogels were non-toxic and reduced the bacterial load causing re-sensitization towards antibiotics, which could initiate re-epithelization. The research concluded that the PVA hydrogels loaded with CIP and 5-NPPP nanoparticles could be an ideal and promising drug delivery system for treating S. aureus-induced skin infections.