Hydrodynamic Characteristics Research Articles

A theoretical analysis of rotating electromagnetohydrodynamic and electroosmotic transport of couple stress fluid through a microchannel

AbstractThe main motivation behind this research work is the electroosmotic flow (EOF), which characterizes the movement of charged particles in a fluid when subjected to an external electric field, which offers precise control over fluid movement without mechanical components. The study of bio‐fluids in rotating microfluidic platforms is becoming much more significant. Hence, it is important to discuss the non‐Newtonian fluids in such environments. This paper analytically investigates the hydrodynamic characteristics of combined electromagnetohydrodynamic (EMHD) and EOF transport of non‐Newtonian fluid through a rotating microchannel with Navier‐slip boundary conditions at the walls. The couple stress fluid model is considered a non‐Newtonian fluid in the flow domain. The linearized Poisson‐Boltzmann equation is considered inside the electric double layer (EDL). The modified Stokes equation is governed by a combined imposed magnetic and EOF field. Closed form expressions are obtained for electrical potential, flow velocity, and volume flow rate in the channel using analytical methods. The dependence of rotating electromagnetic flow velocity and flow rates on appropriate parameters is explained. It is found that the rotational flow velocity displays an opposite pattern when the couple stress parameter and electric field intensity parameters are varied due to the influence of channel rotation. It is also found that the secondary flow rate ratio is amplified with the Hartmann number and slip length parameter, due to the stronger impact of the non‐Newtonian behaviour than the Newtonian situation on the volume flow rate at a relatively higher rotational value. The findings of this study may aid in the design and analysis of practical thermal micro/nano‐equipment for transporting biofluids.

Introduced gas regulating fast and highly exothermic reactions with in situ gas generation in microreactors

AbstractThe oxidation of cyclohexanol/cyclohexanone with nitric acid as a fast and highly exothermic process was hard to control at low molar ratios of oxidant to organic substrate even in microreactors. Process of runaway gas generation was observed due to the local hot spots, which decreased the selectivity of adipic acid. Additional gas was introduced into microreactors before the reaction, changing the previous wave annular flow to the uniform slug flow. Through the microscopic high‐speed photography and CFD simulation, it was found that the internal convection made the reactant molecules in the aqueous slug distribute evenly instead of gathering near the interface before, thus eliminating the local hot spots and stabilizing the hydrodynamic characteristics. The reaction performance was evaluated under different conditions, and a higher adipic acid selectivity of 93.6% was achieved at a molar ratio of 6.7 with the combination of microreactors and conventional reactors.

Mitigating near-surface polarizations in membrane distillation via membrane surface decoration

Temperature and concentration polarizations near the membrane surface zone can significantly affect the performance of membrane distillation, resulting in reduced transmembrane flux and overall efficiency. The fundamental approach to mitigating near-surface polarizations involves enhancing turbulence flow near the membrane surface to minimize the formation of polarization layers. This study focuses on modifying the membrane surface via surface decoration to reduce the polarization layers. The effects of membrane surface decoration on the performance of membrane distillation were systematically investigated through an air gap membrane distillation module under various operating conditions. The hydrodynamic characteristics of the flow near the membrane surface were studied using computational fluid dynamics simulations. The characteristics of both bottom-up and top-down disturbing configurations were analyzed. In addition, we investigated the influence of various flow disturbing methods on the mass transfer coefficient in membrane distillation processes. The membrane distillation test results show that at feed temperatures of 50 °C and 70 °C, there are respective increases in transmembrane flux of 30 % and 12 %. The results provide insights into optimizing the flow state near the membrane surface for enhanced membrane distillation performance.

Hydrodynamic response of a large river–lake system under flow regulation: A numerical study of Hongze lake

The hydrodynamic processes in large river–lake systems and their responses to flow regulation represent regionally unique and highly significant issues. This study presents the implementation, validation and application of a two-dimensional hydrodynamic model to a system comprising a section of the Huai River and Hongze Lake, China. The validated model enabled the identification of hydrodynamic characteristics by analysing the flow patterns under the influence of the local flow regulation. Effective flow regulation measures during flood period reduced the retention time of floodwater in the lake and contributed to a low-velocity current field in the northern part of the river–lake system. Throughout the non-flood period, a distinctive flow pattern emerged due to persistent easterly winds, resulting in a dual circulation pattern in the interconnected region between the northern and central segments of the system. The investigation of flow patterns revealed the creation of stagnant water zones in the northern sector of Hongze Lake. Distributing a substantial portion of outflow discharge to the Erhezha gate could lead to an expansion of the flood passing area by scenario analysis. Simultaneously, implementing intermittent control over the Erhezha gate drainage effectively heightened the current velocities in the stagnant water zone. The deliberate allocation of outflow discharge has a substantial impact on the flow dynamics within a vast river–lake system during the flood season, which carries significant research potential in enhancing the local water self-purification capacity and water quality.

Distribution of acid-volatile sulfides and simultaneously extracted metals in Guanabara Bay: combination of anthropogenic, sedimentological, and geochemical processes.

Coastal sedimentary systems are affected by continental and marine metal pollutant inputs associated with different hydrodynamic characteristics and geochemical processes. These include the formation of acid-volatile sulfides (AVS) within sediments, which affects metal bioavailability and associated aquatic biota toxicity risks. Physicochemical changes in these environments in the face of extreme natural or man-made environmental influences can dramatically alter metal bioavailability and toxicity through metal binding and immobilization as insoluble sulfides. Surface sediments from Guanabara Bay, river mouths, and two mangrove areas were collected, and AVS and simultaneously extracted metals Cd, Cu, Fe, Mn, Ni, Pb, and Zn and ΣSEM were determined to assess sediment quality. A severe eutrophication history favored AVS concentrations exceeding or close to the sum-SEM concentrations, demonstrating that AVS play an important role in making trace metals unavailable for assimilation by living organisms, mitigating the risks of contamination for the local biota. This eutrophication-driven sulfide accumulation may attenuate the sediment toxicity in sites heavily polluted by metals, while some fewer eutrophic sites became more exposed to metals in excess to AVS.

Measuring nanoparticles shape by structured illumination

Exploiting the size and shape of nanoparticles is critical for engineering the optical and mechanical properties of nanoparticle systems that are ubiquitous in everyday life. However, accurate determination of nanoparticle morphology usually requires elaborated methods such as XRD or TEM, which are not suitable for non-invasive and rapid control. Dynamic light scattering on the other hand, relies on the motion of nanoparticles and mixes different rotational and translational diffusion coefficients to infer synthetic information about the shape in terms of effective hydrodynamic characteristics. Here, we introduce a new scattering approach for measuring shape. We demonstrate analytically, numerically, and experimentally that the contrast of low-intensity fluctuations arising from the scattering of classically entangled optical fields allows determining the polarimetric anisotropy of nanoparticles. By leveraging the active variation of illumination structuring, we control the non-Gaussian statistics of the measured fluctuations, which, in turn, provides means to improve the measurement sensitivity. This technique offers practical opportunities for applications ranging from molecular chemistry to drug delivery to nanostructures synthesis where the real-time, quantitative assessment of nanoparticles shapes is indispensable.

Fully coupled simulation of dynamic characteristics of a backward bent duct buoy oscillating water column wave energy converter

In this paper, a fully coupled model for a backward bent duct buoy oscillating water column (BBDB-OWC) wave energy converter (WEC) is established, with the consideration of strong transient nonlinear interactions among ocean waves, BBDB hull motion, mooring system, internal water column oscillation, aerodynamics, turbine rotation and the damping effect of the generator. The model is validated by comparison with experimental results, and then used to investigate the transient characteristics and periodic average performance of the WEC under regular wave conditions. The differences in transient hydrodynamic characteristics and air pressure-flow rate relationship between the fully coupled model and the orifice model are compared. The transient characteristics of an impulse turbine under reciprocating and transient airflows are studied. And the effect of wave period, wave height and load torque coefficient on the average performance of the WEC is investigated.

Hydrodynamic features of pulsed solvent extractor for separation of two metals by using the antagonistic effect of solvents

Separating copper and cobalt ions is crucial due to the industry’s strategic reliance on both these elements. When the extraction process is able to significantly increase the separation factor, it becomes favorable to separate two ions. However, the presence of Cu(II) ions together with Co(II) hinders the achievement of optimum efficiency when using commonly available extractants. This study conducted the separation of the two elements using both batch and continuous methods in a pilot plant pulsed column equipped with a disc and doughnut structure. The initial step involved optimizing the key variables to maximize the separation factor using the central composite design procedure. The optimization of Cyanex272, Cyphos IL 101 concentrations, and the pH value of the aqueous phase were all adjusted to 0.024 M, 0.046 M, and 7.3, correspondingly. In the following step, the hydrodynamic characteristics and extraction performance were examined in the pulsed column of the pilot plant. The findings indicated that the presence of Cyphos IL 101 resulted in an increased separation factor and efficiency within the column. As a result, the ionic liquid enhances performance without encountering any operational issues. This additive is considered an environmentally friendly solvent and does not cause any negative impacts. Consequently, it is suggested for utilization in continuous industrial processes.

The comparative transient prediction on hydrodynamic characteristics and flow field properties of pump-jets with accelerating and decelerating ducts

Pump-jet holds a pivotal position in various marine applications, underscoring the need for comprehending their transient behavior for the purpose of design enhancement and performance refinement. This paper employs Reynolds-averaged Navier–Stokes equations method in conjunction with Detached Eddy Simulation model. The study delves into the ramifications of accelerating and decelerating ducts, distinguished by camber f and attack angles α, on transient hydrodynamic characteristics. The hydrodynamic characteristics are investigated numerically, after the validation of the numerical methodology by comparing simulation outcomes against experimental results. Subsequently, the study delves into propulsion characteristics, followed by an exploration of time-domain and frequency-domain data transformed through fast Fourier transform to analyze thrust fluctuations and pulsating pressures. Additionally, a detailed examination of pressure distribution and velocity field is provided, aiming to dissect the mechanisms through the variations in f and α influence the flow field. Findings suggest that the outlet velocity of accelerating ducts significantly surpasses the inlet velocity, a behavior contrasted by decelerating ducts. Notably, the patterns of accelerating and decelerating ducts resulting from alterations in f exhibit consistent characteristics with those brought about by changes in α. However, several opposite characteristics surface in transient flow field due to the distinct modifications in the duct profile. Furthermore, by considering vorticity magnitude distribution and vortices, a comparative analysis elucidates the effects of varying f and α on rotor and stator trailing vortices. This contributes to understanding the flow instability mechanism under differing duct configurations. It is evident that changes in f and α exert significant influence on both performance and flow field.

Vibration response analysis of rotor system coupled with a novel 4-DOF SFD hydrodynamic model considering the influence of rotational displacement

As a damping structure, squeeze film dampers (SFDs) are commonly employed in turbomachinery. Aiming at the problem of hydrodynamic modeling and solution, this paper presents a four-degree-of-freedom (4-DOF) hydrodynamics model of SFD, which not only considers the influence of radial displacement on oil film clearance but also the influence of rotational displacement. The Reynolds equation of the SFD is solved utilizing the finite difference method (FDM). The oil film gap distribution and static properties of the SFD under different rotational displacements and journal eccentricity are analyzed. Then, the hydrodynamic model of the 4-DOF SFD is coupled with the rotor system, and the vibration characteristics of the SFD-rotor system are analyzed. Finally, the experimental verification is carried out. The analysis results reveal that the rotational displacement has little influence on the vibration response of the SFD-rotor system at the non-critical speed. However, near the critical speed, the occurrence of rotational displacement of the SFD is more beneficial to the vibration reduction effect. Moreover, the analysis results of the hydrodynamic characteristics of the SFD show that when the eccentricity is less than 0.4, the rotational displacement has little effect on the oil film gap distribution, load moment, and oil film reaction force. When the eccentricity exceeds 0.4, the rotational displacement has a great influence on the gap distribution, load moment, and oil film reaction force of SFD.

Influence of the Rhone River intrusion on microplastic distribution in the Bay of Marseille

We present the spatiotemporal distribution of microplastics (MP) in surface waters and sediments between 2020 and 2022 in the Bay of Marseille. Microplastics were extracted with an improved, ecological protocol from 27 surface water and 16 sediment samples. The hydrodynamical circulation model MARS3D-RHOMA was used with in-situ data to test the influence of meteorological and hydrodynamic forcing on the concentration of MPs during the study period. The reported concentrations are analogous to abundances previously found in the Bay of Marseille, as well as in similar coastal systems. Average MP concentrations are 5.79 ± 12.71 MP.m−3 in surface water and 855 ± 413 MP.kg−1 dw in sediments. Simulations revealed hydrodynamic features associated with several episodes of Rhone intrusion in the Bay of Marseille. The observed MP concentrations and distribution in February 2020 suggest that the Rhone River’s plume entered the Bay of Marseille.

Hydrodynamic Characteristics of High-Voltage Electrochemical Explosion with Controlled Input of Electric Energy into the Discharge Channel

Hydrodynamic Characteristics of High-Voltage Electrochemical Explosion with Controlled Input of Electric Energy into the Discharge Channel

Proof of Concept: Development of a Mitral Annuloplasty Ring With Crosshatch Net.

Here we report our preclinical, proof-of-concept testing to assess the ability of a novel device to correct mitral regurgitation. The Milwaukee Heart device aims to enable any cardiac surgeon to perform high-quality mitral valve repair using a standard annuloplasty ring with a crosshatch of microporous, monofilament suture. Hemodynamic, echocardiographic, and videographic data were collected at baseline, following induction of mitral regurgitation, and after repair using porcine hearts in an ex vivo biosimulator model. A commercially available cardiac prosthesis assessment platform was then used to assess the hydrodynamic characteristics of the study device. Porcine biosimulator pressure and flow metrics exhibited successful correction of mitral regurgitation following device implantation with similar values to baseline. Hydrodynamic results yielded pressure gradients and an effective orifice area comparable to currently approved prostheses. The study device effectively reduced mitral valve regurgitation and improved hemodynamics in our preclinical model with similar biophysical metrics to currently approved devices. Future in vivo trials are needed to evaluate the efficacy, biocompatibility, and freedom from the most likely adverse events, such as device thrombosis, embolic events, and hemolysis.

Study of the Hydrodynamic Characteristics of Anti-Heave Devices of Wind Turbine Platforms at Different Water Depths

Abstract This paper focuses on the effect of water depth on the hydrodynamics of floating offshore wind turbines with open-hole anti-heave devices. The three-floating-body wind turbine platform is used as the primary research object in this paper. The effect of water depth on the reduction of the heave motion of a floating platform with anti-heave devices is systematically investigated through a series of experiments and numerical simulations. The results show high agreement between the test results and simulations, with larger values of heave motion in deep water. A wind turbine platform with anti-heave devices can effectively reduce the lifting and sinking motions when the wave period is large.

Экспериментальное исследование гидравлических характеристик сферических насадок для массообменных аппаратов

A critical analysis of the trends in the development of nozzles for mass transfer devices is given, some designs are described in which the transfer of heat and mass is organized from the standpoint of today technically the most perfect. It is shown that the specific surface, the free specific volume of the nozzle and the hydraulic resistance of the layer are determined as the main characteristics of irregular type packing bodies. The scheme and description of an experimental setup for determining the hydrodynamic characteristics of nozzles in laboratory conditions are given. The results of studies of the hydrodynamic parameters of a layer consisting of a spherical hollow irregular nozzle for a dry and irrigated column are presented. The singular velocities of the gas flow corresponding to the transition points (points of deceleration, suspension, inversion or choking) to different hydrodynamic modes of operation of the filling mass transfer columns (film, intermediate, turbulent) and corresponding pressure drops have been experimentally determined. The dependences of the hydraulic resistance of the nozzle layer on the gas velocity in the column for dry and irrigated nozzles with a 1 m high layer are determined. The main reasons for the decrease in gas pressure in the layer of the irrigated nozzle are indicated. The singular gas flow velocities and their corresponding pressure drops are calculated using known empirical dependencies for dry and irrigated nozzles. The results of experimental studies and engineering calculations were compared, thereby proving the possibility of using computational equations with satisfactory accuracy (up to 15%). The study of the hydrodynamics of the layer and its hydraulic characteristics has shown that the spherical, hollow nozzle design with evenly spaced holes on the surface provides an effective redistribution of working phases in the mass transfer apparatus.

Investigation of Hydrodynamic Characteristics of Pulse-Wave Action for Various Technological Modes of Electric Discharge Installations for the Destruction of Non-Metallic Materials

Investigation of Hydrodynamic Characteristics of Pulse-Wave Action for Various Technological Modes of Electric Discharge Installations for the Destruction of Non-Metallic Materials

Features of the design and control of an underwater biomorphic robot of the tunniform type

The article describes the design and main dynamic characteristics of an underwater vehicle of the biomorphic (fish-like) type, which implements the tunniform type of locomotion for movement under water. The body of the device is made on the basis of a digital model of the body of yellowfin tuna. The movement is provided by a driv-ing device that simulates the operation of the tail fin of a fish. The robot's navigation on the surface and with a dive to a shallow depth is controlled by a remote control system, which allows you to change the dynamic characteris-tics (amplitude and frequency) of tail vibrations. In the experimental study, the dependencies of the speed of movement and energy consumption of the robot depending on these characteristics were obtained. In the theoreti-cal study, a computational model of the robot was obtained based on the solution of hydrodynamic equations. In computer modeling of swimming using the method of deformable nets, a good correspondence with experimental data was obtained. In addition, the hydrodynamic characteristics of the flow during the movement of the robot were investigated, as well as various features of the vibrations of the elements of the robot body when moving in a liquid were explained.

Numerical Study on Wave Dissipation and Mooring Force of a Horizontal Multi-Cylinder Floating Breakwater

A three-dimensional numerical model was established based on ANSYS-AQWA (R19.0) software for the purpose of analyzing the hydrodynamic characteristics of a floating breakwater. This study examines three distinct floating breakwaters with different cross-sectional designs in order to evaluate their respective wave dissipation capabilities. It is suggested that the horizontal multi-cylinder floating breakwater exhibits a superior ability to dissipate waves when compared to both the single-cylinder and square pontoon configurations and can be deemed the most advantageous shielding strategy for potential engineering applications. Subsequently, this study examines the effects of influential parameters, including a large cylinder diameter, a small cylinder diameter, the angular position of the small cylinder, and the height and period of the incident wave, on the wave transmission coefficient. An empirical formula for the wave transmission coefficient was derived based on the numerical results. Additionally, the effects of influential parameters, including wind speed, current velocity, incident wave height and period, and water depth, on the maximum total mooring force were investigated. Furthermore, an empirical formula for the maximum total mooring force is proposed for practical implementation in engineering.

On the transition from single- to multi-humped internal solitary waves

We provide numerical evidence of the transition from rank-ordered trains of internal solitary waves (ISWs) to multi-humped packets. We ascribe such peculiar and unexplored dynamics to the emergence of a long-range influence among waves, mediated by the hydrodynamic conditions developing in the wake of each ISW and promoting acceleration of the trailing waves. Both the train during the transition and its final multi-humped configuration share hydrodynamic features which are consistent with the recently proposed theory of ISWs propagating through moving stratified environments.

Motion tracking of fish and bubble clouds in synthetic aperture sonar data.

Data captured by a Synthetic Aperture Sonar (SAS) near Mobile Bay during the 2021 Undersea Remote Sensing experiment funded by the Office of Naval Research reveals near surface bubble clouds from wave breaking events and a large aggregation of fish. Tools developed for using SAS data to image hydrodynamic features in the water column were applied to observations of the bubble clouds and fish aggregation. Combining imagery and height data captured by the sonar array with a detection and tracking algorithm enables the trajectories, velocities, and behavior of fish in the aggregation to be observed. Fitting the velocity and height data of the tracked objects to a Gaussian mixture model and performing cluster analysis enables an estimate of the near-surface ambient velocity via observation of the movement of the bubble traces and the general direction of motion of the fish aggregation. We find that the velocity traces associated with bubbles are consistent with ambient currents as opposed to the direction of propagating wave crests while velocities of fish indicate relatively large, pelagic species.