Hydride Transfer Research Articles

Single nickel atoms anchored on porous N-doped nanocarbon with dual reaction sites for highly-efficient transfer hydrogenation of furfural to furfuryl alcohol

The non-precious metal single-atom catalysts (SACs) supported on carbon materials for the catalytic transfer hydrogenation (CTH) of α,β-unsaturated aldehydes (UAL) still suffer from the problems of harsh reaction conditions and low activity. In this work, nickel SACs anchored on porous N-doped nanocarbon (Ni1/NC900) with dual reaction sites were synthesized using the high internal-phase emulsion (HIPE) template method combined with impregnation. The Ni1/NC900 catalyst exhibited remarkable catalytic activity for the CTH of furfural (FF) to furfuryl alcohol (FFA), achieving >99.0 % conversion and selectivity at 100 °C for 60 min, with a turnover frequency (TOF) of 2908.1 h−1, surpassing other reported nickel-based catalysts by 1–3 orders of magnitude. The excellent catalytic performance of Ni1/NC900 was attributed to the high mass transfer efficiency (HMTE) of the support and the dual reaction sites of Ni–N4 and pyridinic N, where Ni–N4 as Lewis acidic site for adsorption of FF and isopropanol (i-PrOH), while the adjacent pyridinic N as Lewis basic site for the deprotonation of i-PrOH. The isotope labeling experiments revealed that the hydrogenation of FF was accomplished by proton transfer with i-PrOH, in agreement with the intermolecular hydride transfer mechanism. Furthermore, Ni1/NC900 demonstrated excellent stability and well general applicability, demonstrating its potential for industrial applications. This work provides a reference for the application of carbon-based non-precious metal SACs in the CTH reaction of UAL.

Taming CO2•- via Synergistic Triple Catalysis in Anti-Markovnikov Hydrocarboxylation of Alkenes.

The direct utilization of carbon dioxide as an ideal one-carbon source in value-added chemical synthesis has garnered significant attention from the standpoint of global sustainability. In this regard, the photo/electrochemical reduction of CO2 into useful fuels and chemical feedstocks could offer a great promise for the transition to a carbon-neutral economy. However, challenges in product selectivity continue to limit the practical application of these systems. A robust and general method for the conversion of CO2 to the polarity-reversed carbon dioxide radical anion, a C1 synthon, is critical for the successful valorization of CO2 to selective carboxylation reactions. We demonstrate herein a hydride and hydrogen atom transfer synergy driven general catalytic platform involving CO2•- for highly selective anti-Markovnikov hydrocarboxylation of alkenes via triple photoredox, hydride, and hydrogen atom transfer catalysis. Mechanistic studies suggest that the synergistic operation of the triple catalytic cycle ensures a low-steady-state concentration of CO2•- in the reaction medium. This method using a renewable light energy source is mild, robust, selective, and capable of accommodating a wide range of activated and unactivated alkenes. The highly selective nature of the transformation has been revealed through the synthesis of hydrocarboxylic acids from the substrates bearing a hydrogen atom available for intramolecular 1,n-HAT process as well as diastereoselective synthesis. This technology represents a general strategy for the merger of in situ formate generation with a synergistic photoredox and HAA catalytic cycle to provide CO2•- for selective chemical transformations.

A Quantum Mechanical Approach to The Mechanism of Asymmetric Synthesis of Chiral Amine by Imine Reductase from Stackebrandtia Nassauensis.

The asymmetric synthesis of tetrahydroisoquinolines (THIQs) has gained importance in recent years due to their significant potential in drug development studies. In this study, the conversion of 1-methyl-3,4-dihydroisoquinoline substrate to a chiral amine, 1-methyl-1,2,3,4-tetrahydroisoquinoline, under the catalysis of the stereoselective imine reductase enzyme from Stackebrandtia nassauensis (SnIR) was investigated in detail to elucidate the mechanism and explain the experimental enantioselectivity. The results were found to be in agreement with the experimental data. To elucidate the reaction mechanism, quantum mechanical calculations were performed by considering a large cluster of the active site of the enzyme. In this regard, possible reaction pathways leading to both R- and S-products with the corresponding intermediates and the transition states for the hydride transfer from the cofactor to the substrate were considered by density functional theory (DFT) calculations, and the factors contributing to the observed stereoselectivity were sought. The calculations supported a stepwise mechanism rather than the concerted protonation and the hydride transfer steps. The stereoselectivity in the hydride transfer was found to be due not only to the stability of the enzyme-subtrate complex but also to the corresponding reaction barriers. The calculations were performed at the wB97XD/6-311+G(2df,2p)//B3LYP/6-31G(d,p) level of theory using the PCM approach.

Environment- and Conformation-Induced Frequency Shifts of C-D Vibrational Stark Probes in NAD(P)H Cofactors.

NAD(P)H cofactors are found in all forms of life and are essential for electron and hydrogen atom transfer. The linear response of a carbon-deuterium (C-D) vibration based on the vibrational Stark effect can facilitate measurements of electric fields for critical biological reactions including cofactor-mediated hydride transfer. We find both inter- and intramolecular electric fields influence the C-D frequency in NAD(P)H and nicotinamide-like models where the reactive C4-hydrogen has been deuterated. Hence, the C-D frequency can report both environmental electrostatics and conformational changes of the nicotinamide ring. Conformation-dependent effects are mediated through space as electrostatic effects, rather than through-bond. A Stark tuning rate of ∼0.57 cm-1/(MV/cm) was determined using both experimental and computational approaches, including vibrational solvatochromism, molecular dynamics simulations, and in silico Stark calculations. The vibrational probe's Stark tuning rate is shown to be robust and suitable for measuring fields along hydride transfer reaction coordinates in enzymes.

Noncovalent Inhibition and Covalent Inactivation of Proline Dehydrogenase by Analogs of N-Propargylglycine.

The flavoenzyme proline dehydrogenase (PRODH) catalyzes the first step of proline catabolism, the oxidation of l-proline to Δ1-pyrroline-5-carboxylate. The enzyme is a target for chemical probe discovery because of its role in the metabolism of certain cancer cells. N-propargylglycine is the first and best characterized mechanism-based covalent inactivator of PRODH. This compound consists of a recognition module (glycine) that directs the inactivator to the active site and an alkyne warhead that reacts with the FAD after oxidative activation, leading to covalent modification of the FAD N5 atom. Here we report structural and kinetic data on analogs of N-propargylglycine with the goals of understanding the initial docking step of the inactivation mechanism and to test the allyl group as a warhead. The crystal structures of PRODH complexed with unreactive analogs in which N is replaced by S show how the recognition module mimics the substrate proline by forming ion pairs with conserved arginine and lysine residues. Further, the C atom adjacent to the alkyne warhead is optimally positioned for hydride transfer to the FAD, providing the structural basis for the first bond-breaking step of the inactivation mechanism. The structures also suggest new strategies for designing improved N-propargylglycine analogs. N-allylglycine, which consists of a glycine recognition module and allyl warhead, is shown to be a covalent inactivator; however, it is less efficient than N-propargylglycine in both enzyme inactivation and cellular assays. Crystal structures of the N-allylglycine-inactivated enzyme are consistent with covalent modification of the N5 by propanal.

Deciphering the Two-Step Hydride Mechanism of Monoamine Oxidase Flavoenzymes.

The complete two-step hydride transfer mechanism of amine oxidation involved in the metabolism of monoamine neurotransmitters was scrutinized by DFT calculations. In living organisms, this process is catalyzed by monoamine oxidase enzymes. Herein, we focus on some intriguing aspects of the reaction that may have been previously noticed but have not been clarified to date. The first step of the reaction includes the C-H bond cleavage on the methylene group vicinal to the amino group of the monoamine substrate and the subsequent transfer of hydrogen to the N5 atom of the flavin prosthetic group of the enzyme. We confirmed the nature of this step to be hydride transfer by evaluation of the pertinent HOMO-LUMO gap together with analysis of orbital contours alongside the intrinsic reaction coordinate profile. Next, we investigated the rather peculiar intermediate adduct that may form between the amine substrate and the flavin molecule, featuring an unusually long C-N bond of ∼1.62 Å. Although this bond is quite stable in the gas phase, the presence of just a few explicit water molecules facilitates its dissociation almost without energy input so that the amine-flavin intermediate can form an ionic pair instead. We attribute the existence of the unusual C-N bond to a fragile balance between opposing electronic structure effects, as evaluated by the natural bond orbital analysis. In line with this, the intermediate in the solution or in the enzyme active site can exist in two energetically almost equivalent forms, namely, as a covalently bound complex or as an ion pair, as suggested by previous studies. Finally, we characterized the transformation of the intermediate to the fully reduced flavin and imine products via proton transfer from the amino group to the flavin N1 atom, completing the reductive part of the catalytic cycle. Although we found that explicit solvation substantially boosts the kinetics of this step, the corresponding barrier is significantly lower than that in the hydride transfer step, confirming hydrogen abstraction as the rate-limiting step of amine oxidation and validating the two-step hydride transfer mechanism of monoamine oxidases.

Mechanism of Action of Formate Dehydrogenases.

The molybdenum- and tungsten-containing formate dehydrogenases from a variety of microorganisms catalyze the reversible interconversion of formate and CO2; several, in fact, function as CO2 reductases in the reverse direction under physiological conditions. CO2 reduction catalyzed by these enzymes occurs under mild temperature and pressure rather than the elevated conditions required for current industrial processes. Given the contemporary importance of remediation of atmospheric CO2 to address global warming, there has been considerable interest in the application of these enzymes in bioreactors. Equally important, understanding the detailed means by which these biological catalysts convert CO2 to formate, a useful and easily transported feedstock chemical, might also inspire the development of a new generation of highly efficient, biomimetic synthetic catalysts. Here we have examined the ability of the FdsDABG formate dehydrogenase from Cupriavidus necator to catalyze the exchange of solvent oxygen into product CO2 during the course of formate oxidation under single-turnover conditions. Negligible incorporation of 18O is observed when the experiment is performed in H218O, indicating that bicarbonate cannot be the immediate product of the enzyme-catalyzed reaction, as previously concluded. These results, in conjunction with the observation that the reductive half-reaction exhibits mildly acid-catalyzed rather than base-catalyzed chemistry, are consistent with a reaction mechanism involving direct hydride transfer from formate to the enzyme's molybdenum center, directly yielding CO2. Our results are inconsistent with any mechanism in which the initial product formed on oxidation of formate is bicarbonate.

A New Mechanism for Formation of Glycine from Glyoxylic acid: the Aza-Cannizzaro Reaction.

Glyoxylic acid and glycine are widely considered to have been important prebiotic building blocks. Several mechanistic routes have been previously examined for conversion of glyoxylic acid to glycine. Here we provide evidence for a new mechanistic path. Glycine is spontaneously formed from glyoxylic acid in ammonium-rich aqueous solutions at neutral pH; oxamic acid is generated as well. Hydride transfer from the glyoxylate-derived hemiaminal to the corresponding iminium ion appears to underlie this transformation. This proposed mechanism parallels the well-known Cannizzaro reaction mechanism, which leads us to suggest the designation "aza-Cannizzaro reaction." This discovery offers a new perspective on prebiotic nitrogen incorporation because glycine can be a source of nitrogen for more complex molecules, including other α-amino acids.

Linear Free Energy Relationships Associated with Hydride Transfer From [(6,6'-R2-bpy)Re(CO)3H]: A Cautionary Tale in Identifying Hydrogen Bonding Effects in the Secondary Coordination Sphere.

Six rhenium hydride complexes, [(6,6'-R2-bpy)Re(CO)3H] (bpy = 2,2'-bipyridine, R = OEt, OMe, NHMe, Me, F, Br), were synthesized. These complexes insert CO2 to form rhenium formate complexes of the type [(6,6'-R2-bpy)Re(CO)3{OC(O)H}]. All the rhenium formate species were characterized using X-ray crystallography, which revealed that the bpy ligand is not coplanar with the metal coordination plane containing the two nitrogen donors of the bpy ligand but tilted. A solid-state structure of [(6,6'-Me2-bpy)Re(CO)3H] determined using MicroED also featured a tilted bpy ligand. The kinetics of CO2 insertion into complexes of the type [(6,6'-R2-bpy)Re(CO)3H] were measured experimentally and the thermodynamic hydricities of [(6,6'-R2-bpy)Re(CO)3H] species were determined using theoretical calculations. A Brønsted plot constructed using the experimentally determined rate constants for CO2 insertion and the calculated thermodynamic hydricities for [(6,6'-R2-bpy)Re(CO)3H] revealed a linear free energy relationship (LFER) between thermodynamic and kinetic hydricity. This LFER is different to the previously determined relationship for CO2 insertion into complexes of the type [(4,4'-R2-bpy)Re(CO)3H]. At a given thermodynamic hydricity, CO2 insertion is faster for complexes containing a 6,6'-substituted bpy ligand. This is likely in part due to the tilting observed for systems with 6,6'-substituted bpy ligands. Notably, the 6,6'-(NHMe)2-bpy ligand could in principle stabilize the transition state for CO2 insertion via hydrogen bonding. This work shows that if only the rate of CO2 insertion into [(6,6'-(NHMe)2-bpy)Re(CO)3H] is compared to [(4,4'-R2-bpy)Re(CO)3H] systems, the increase in rate could be easily attributed to hydrogen bonding, but in fact all 6,6'-substituted systems lead to faster than expected rates.

Hydride and halide abstraction reactions behind the enhanced basicity of Be and Mg clusters with nitrogen bases.

In this study, we investigate the protonation effects on the structure, relative stability and basicity of complexes formed by the interaction of monomers and dimers of BeX2 and MgX2 (X = H, F) with NH3, CH2NH, HCN, and NC5H5 bases. Calculations were performed using the M06-2X/aug-cc-pVTZ formalism, along with QTAIM, ELF and NCI methods for electron density analysis and MBIE and LMO-EDA energy decomposition analyses for interaction enthalpies. The protonation of the MH2- and M2H4-Base complexes occurs at the negatively charged hydrogen atoms of the MH2 and M2H4 moieties through typical hydride abstraction reactions, while protonation at the N atom of the base is systematically less exothermic. The preference for the hydride transfer mechanism is directly associated with the significant exothermicity of H2 formation through the interaction between H- and H+, and the high hydride donor ability of these complexes. The basicity of both, MH2 and M2H4 compounds increases enormously upon association with the corresponding bases, with the increase exceeding 40 orders of magnitude in terms of ionization constants. Due to the smaller exothermicity of HF formation, the basicity of fluorides is lower than that of hydrides. In Be complexes, the protonation at the N atom of the base dominates over the fluoride abstraction mechanism. However, for the Mg complexes the fluoride abstraction mechanism is energetically the most favorable process, reflecting the greater facility of Mg complexes to lose F-.

Glycerol 3-Phosphate Dehydrogenase Catalyzed Hydride Transfer: Enzyme Activation by Cofactor Pieces.

Glycerol 3-phosphate dehydrogenase catalyzes reversible hydride transfer from glycerol 3-phosphate (G3P) to NAD+ to form dihydroxyacetone phosphate; from the truncated substrate ethylene glycol to NAD+ in a reaction activated by the phosphite dianion substrate fragment; and from G3P to the truncated nicotinamide riboside cofactor in a reaction activated by adenosine 5'-diphosphate, adenosine 5'-monophosphate, and ribose 5-phosphate cofactor fragments. The sum of the stabilization of the transition state for GPDH-catalyzed hydride transfer reactions of the whole substrates by the phosphodianion fragment of G3P and the ADP fragment of NAD+ is 25 kcal/mol. Fourteen kcal/mol of this transition state stabilization is recovered as phosphite dianion and AMP activation of the reactions of the substrate and cofactor fragments. X-ray crystal structures for unliganded GPDH, for a binary GPDH·NAD+ complex, and for a nonproductive ternary GPDH·NAD+·DHAP complex show that the ligand binding energy is utilized to drive an extensive protein conformational change that creates a caged complex for these ligands. The phosphite dianion and AMP fragments are proposed to activate GPDH for the catalysis of hydride transfer by stabilization of this active caged complex. The closure of a conserved loop [292-LNGQKL-297] during substrate binding stabilizes the G3P and NAD+ complexes by interactions, respectively, with the Q295 and K296 loop side chains. The appearance and apparent conservation of two side chains that interact with the hydride donor and acceptor to stabilize the active closed enzyme are proposed to represent a significant improvement in the catalytic performance of GPDH.

The Hydronaphthalide Monoanion: Isolation of the "red transient" Birch Intermediate from liquid Ammonia.

Birch reactions employing alkali metals in ammonia have been a well-established method for the reduction and functionalisation of aromatic compounds for nearly 100 years. Speculations regarding intermediates in the reaction pathway have been discussed since the beginning. We hereby report the isolation of NMe4(HNaph) (1), a kinetically trapped intermediate of the Birch reaction of naphthalene and sodium in liquid ammonia. 1 has been fully characterised and has been shown to continue to react to 1,2/1,4-dihydronaphthalene - the Birch product of the reduction of naphthalene. The reactivity of 1 was investigated towards activity as an electron and hydride transfer agent with both, elements and small organic molecules. 1 demonstrates a tamed reduction potential which allows for controlled reactions such as the selective formation of hexasulphide and hexaselenide anions.

A Selective Iron(I) Hydrogenation Catalyst.

Iron is the most abundant transition metal of the Earth's crust, and the understanding of its function in key technologies, such as catalysis, is highly important. We report here on an iron(I) hydrogenation catalyst. Our catalyst activates hydrogen via heterolytic bond cleavage, forms a monohydride, and hydrogenates polar double bonds via a bimetallic pathway (potassium-assisted hydride transfer). The mechanism observed seems to exclude oxidative addition and reductive elimination pathways, permitting the tolerance of numerous hydrogenation-sensitive functional groups, as demonstrated for the hydrogenation of C═O bonds.

Unveiling the intrinsic activity of TiO2 in HMF valorisation

In the context of 5-hydroxymethylfurfural (HMF) valorisation, TiO2 has emerged as a promising support. However, its intrinsic activity and underlying structural parameters remained undiscovered. This study elucidates the close relationship between structural and surface properties of TiO2 (e.g. crystalline size, surface area, and the number and type of acid sites) and its activity in HMF conversion. Lewis acid sites were found to be the exclusive acid sites present in anatase TiO2 samples, and their abundance correlated strongly with the overall surface area of TiO2. HMF conversion over TiO2 led to the simultaneous formation of 5-methylfurfural (5-MF) and 2,5-diformylfuran (2,5-DFF). Their formation was attributed to an intermolecular hydride transfer occurring over the Lewis acid sites. This opens up the possibility of selectively obtaining 5-MF and 2,5-DFF using solely TiO2 active sites. These findings provide valuable insights for designing TiO2-supported metal catalysts for future energy and environmental applications, aligning with green chemistry principles.

Uncovering a general oxidation model of nitrogen-containing oxidant in N-heterocyclic carbene (NHC) catalyzed oxidative reactions of aldehydes

Predicting how oxidants interact with reactive partners to alter the oxidation mechanism is a significant challenge in carbene catalysis. In this study, we investigated several examples to address this issue. Using density functional theory (DFT), we explored N-heterocyclic carbene (NHC)-catalyzed oxidative [2 + 4] annulations of aliphatic aldehydes with α,β-unsaturated ketones, focusing on the role of nitrogen-containing oxidant. Our computational results reveal that a hydrogen-bonding bridge framework, formed during oxidation, is crucial for facilitating π···π stacking interactions between the oxidant and the NHC catalyst. These interactions significantly lower the oxidation energy barrier, enabling a facile hydride transfer. This mechanism was validated across other reactions involving different nitrogen-containing oxidants. Frontier molecular orbital (FMO) analysis demonstrates how the NHC catalyst lowers the cycloaddition energy barrier by altering the orbital overlap from shoulder-to-head to head-to-head. Additionally, this elucidates the origin of stereoselectivity by highlighting energy differences between two reacting components at cycloaddition transition states. The nucleophilic index further predicts the preferred ketone attack site. This work advances our understanding of oxidation mechanisms involving nitrogen-containing oxidants and offers valuable insights for designing potent organic oxidants in organocatalytic oxidative reactions.

Lewis Acid‐Tethered (cAAC)—Copper Complexes: Reactivity for Hydride Transfer and Catalytic CO2 Hydrogenation

AbstractWe present a series of borane‐tethered cyclic (alkyl)(amino)carbene (cAAC)‐copper complexes, including a borane‐capped Cu(I) hydride. This hydride is unusually hydridic and reacts rapidly with both CO2 and 2,6‐dimethylphenol at room temperature. Its reactivity is distinct from variants without a tethered borane, and the underlying principles governing the enhanced hydricity were evaluated experimentally and theoretically. These stoichiometric results were extended to catalytic CO2 hydrogenation, and the borane‐tethered (intramolecular) system exhibits ~3‐fold enhancement relative to an intermolecular system.

Single-Atom Co-N4 Sites Mediate C=N Formation via Reductive Coupling of Nitroarenes with Alcohols.

It remains challenging to construct C=N bonds due to their facile hydrogenation. Herein, a single Co atom catalyst was discovered to be active for the selective construction of C=N bonds toward the synthesis of imines and N-heterocycles via reductive coupling of nitroarenes with various alcohols, including inert aliphatic ones. DFT calculations and experimental data revealed that the transfer hydrogenation proceeded via the intramolecular hydride transfer and the transfer of H from the α-Csp3-H bond to the nitro group was the rate-determining step. The single Co atoms served as a bridge to transfer the electrons from the catalyst to the adsorbed alcohol molecules, resulting in the activation of the α-Csp3-H bond. Unlike metal nanoparticles, the C=N bonds in imine products can be reserved due to the large steric hindrance from substituents on C and N. DFT calculation also confirmed that transfer hydrogenation of the C=N bonds in imines is thermodynamically unfavored with a much higher energy barrier compared with the transfer hydrogenation of the -NO2 group (1.47 vs 1.15 eV).

Tetra-Amido Macrocyclic Ligand (TAML) at Silicon(IV): A Structurally Constrained, Water-Soluble Silicon Lewis Superacid.

Tetracoordinate silicon species are typically tetrahedral, weak Lewis acids, and often sensitive to moisture. In this study, we present a tetra-amido macrocyclic ligand (TAML)-substituted Si(IV), isolated as its bis(pyridine) adduct. Due to structural constraint toward anti van't-Hof/Le Bel geometry, this compound exhibits Lewis superacidity and effectively catalyzes the hydroboration of pyridine. Kinetic and computational analyses of the catalytic cycle reveal that TAML-Si(IV) acts as a hydride transfer agent, and the hydrido silicate key intermediate is isolated. Notably, the Lewis acid is highly soluble (5 g/L) and long-term stable in water. Unlike previously described silicon-H2O adducts, the bound water becomes substantially acidified, reaching the Bro̷nsted superacidity range. A comparison of water affinity versus pKa lowering confirms our previous theory of the strength and the effect of Lewis acids. Overall, the compound's unlimited water compatibility and its mechanistically understood catalytic efficiency mark significant progress in applying structural constraint strategies for p-block element-based catalysis, while the acidification touches critical aspects of zeolite and silica surface chemistry.

Polar Interactions between Substrate and Flavin Control Iodotyrosine Deiodinase Function.

Flavin cofactors offer a wide range of chemical mechanisms to support a great diversity in catalytic function. As a corollary, such diversity necessitates careful control within each flavoprotein to limit its function to an appropriate subset of possible reactions and substrates. This task falls to the protein environment surrounding the flavin in most enzymes. For iodotyrosine deiodinase that catalyzes a reductive dehalogenation of halotyrosines, substrates can dictate the chemistry available to the flavin. Their ability to stabilize the necessary one-electron reduced semiquinone form of flavin strictly depends on a direct coordination between the flavin and α-ammonium and carboxylate groups of its substrates. While perturbations to the carboxylate group do not significantly affect binding to the resting oxidized form of the deiodinase, dehalogenation (kcat/Km) is suppressed by over 2000-fold. Lack of the α-ammonium group abolishes detectable binding and dehalogenation. Substitution of the ammonium group with a hydroxyl group does not restore measurable binding but does support dehalogenation with an efficiency greater than those of the carboxylate derivatives. Consistent with these observations, the flavin semiquinone does not accumulate during redox titration in the presence of inert substrate analogues lacking either the α-ammonium or carboxylate groups. As a complement, a nitroreductase activity based on hydride transfer is revealed for the appropriate substrates with perturbations to their zwitterion.

Monte Carlo QM/MM simulation studies of the Cannizzaro reaction in ionic liquids for improved biofuel production.

The conversion of biomass to 5-hydroxymethylfurfural (HMF) holds substantial promise as a renewable energy source. Notably, HMF can be transformed into 2,5-bis(hydroxymethyl)furan (BHMF), a crucial reactant in biofuel production, but requires harsh operating conditions, H2, and precious metal catalysts. A recently reported Cannizzaro reaction of HMF to BHMF, characterized by its efficiency, mild conditions, and eco-friendliness, instead employed ionic liquids (ILs) to achieve high yields. In this study, combined quantum mechanical and molecular mechanical (QM/MM) simulations in conjunction with Metropolis Monte Carlo statistical mechanics and free-energy perturbation theory utilized M06-2X/6-31+G(d), PDDG/PM3, and the OPLS-VSIL force field to uncover important solute-solvent interactions present in the HMF to BHMF reaction pathway. The Cannizzaro reaction was examined in water and in five ILs composed of the 1-butyl-3-methylimidazolium [BMIM] cation coupled to hexafluorophosphate, tetrafluoroborate, thiocyanate, chloride, and bromide. Energetic and structural analysis of the rate-determining hydride transfer between HMF and the hydride-donor anion HMFOH- attributed the enhanced reactivity to highly organized solvent interactions featuring (1) hydrogen bonding between the ring protons of [BMIM] and the negatively charged carbonyl oxygen atoms on the transition structure, (2) favorable electrostatic interactions between the IL anions and solute hydroxyl groups, and (3) beneficial π-π stacking interactions between [BMIM] and the two aromatic rings present in HMF and HMFOH-.