Hydride Precursors Research Articles

Chemical Vapor Deposition of Elemental Crystallogen Thin Films

A consolidation of the fundamentals of elemental crystallogen chemical vapor deposition (CVD) is a necessity in view of the extensive evidence accumulated over the last few decades. An in-depth understanding of deposition mechanisms via hydrides asks for a discerning understanding of molecular hydrogen dissociative adsorption, precursor thermal decomposition, and CVD growth rates. With those, a groundbreaking paradigm shift comes to light. GR activation energy E(GR) fingerprints the surface energy. SE ≈ 2 × E(GR)/(a×a), where SE is surface energy, E(GR) activation energy, a lattice parameter. Hydride precursor thermal decomposition consistency with the corresponding solid growth kinetics is demonstrated. Heterogeneous TD kinetics captures a solid deposition and not a gas phase molecular reaction. Thermodynamic equilibrium is achieved during the heterogeneous thermal decomposition of silicon precursors. The popular split between mass-transfer and kinetic regimes is not supported by evidence. Three mechanisms are apparent. The first is controlled by a Si–H bond dissociation energy. The second is controlled by an H–H bond dissociation energy. The last is controlled by a Si–Si bond dissociation energy as lattice sites are sealed off with Si–H bonds.

Self-reducing precursors for aluminium metal thin films: evaluation of stable aluminium hydrides for vapor phase aluminium deposition.

Thin films of Al as interconnect materials and those of AlN as wide bandgap semiconductor and piezoelectric material are of great interest for microelectronic applications. For the fabrication of these thin films via chemical vapor deposition (CVD) based routes, the available precursor library is rather limited, mostly comprising aluminium alkyls, chlorides, and few small amine-stabilized aluminium hydrides. Herein, we focused on rational precursor development for Al, their characterization and comparison to existing precursors comprising stabilized aluminium hydrides. We present and compare a series of potentially new and reported aluminium hydride precursors divided into three main groups with respect to their stabilization motive, and their systematic structural variation to evaluate the physicochemical properties. All compounds were comprehensively characterized by means of nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR), elemental analysis (EA), electron-impact ionization mass spectrometry (EI-MS) and thermogravimetric analysis (TGA). Promising representatives were further evaluated as potential single source precursors for aluminium metal formation in proof-of-concept experiments. Structure and reaction enthalpies with NH3 or H2 as co-reactants were calculated via first principles density functional theory simulations and show the great potential as atomic layer deposition (ALD) precursors for Al and AlN thin films.

Cross-coupling of CO and an isocyanide mediated by a tetrameric magnesium hydride cluster.

Sequential addition of CNXyl (Xyl = 2,6-dimethylphenyl) and CO to a tetrametallic magnesium hydride cluster results in stepwise reduction and cross-coupling of these substrates. Cross-coupling results in the formation of an ethene amidolate ligand [OC1(H1)[double bond, length as m-dash]C2(H2)NAr]2- a previously unknown entity which contains a 1,2-difunctionalised carbon chain reminiscent of those found in aminoalcohols and amino acids. To the best of our knowledge, this is the first example of such reactivity with metal hydride precursors. DFT calculations support a mechanism that parallels that established for coupling of CO to form ethenediolate ligands, with the key carbon-carbon bond step occurring by nucleophilic attack of a putative azamethylene intermediate on CO. The cluster plays a key role in templating the synthesis, providing kinetic control over each of the steps. The ethene amidolate ligand can be transferred to other metals (Al) and semi-metals (B) through onwards metathesis reactions.

Facile Synthesis of Ti2AC (A = Zn, Al, In, and Ga) MAX Phases by Hydrogen Incorporation into Crystallographic Voids.

While using hydride precursors, such as TiH2, can promote the formation of some MAX phases, the mechanism for this stabilization effect by hydrogen has been unsolved. Herein, we report a facile synthesis method of Ti2AC (A = Zn, Al, In, and Ga) MAX phases using hydrogen as the phase stabilizer at their crystallographic voids. DFT calculations revealed that hydrogen could be incorporated in the center of the Ti3A (A = Zn, Al, Ga, and In) cages of Ti2AC MAX phases. The hydrogen is accommodated as an anion as a result of electron transfer from the surrounding Ti and A to H, leading to the stabilized state through Coulomb interaction between (Ti3A)δ+ and H-. Consequently, high-purity Ti2AC (A = Zn, Al, Ga, and In) was directly synthesized under pressure-less and milder temperature conditions by simply employing TiH2 as the precursor. These findings indicate that utilizing hydrogen could be one of the experimental parameters to facilitate the formation of materials having crystallographic voids.

Al-alkyls as acceptor dopant precursors for atomic-scale devices

Atomically precise ultradoping of silicon is possible with atomic resists, area-selective surface chemistry, and a limited set of hydride and halide precursor molecules, in a process known as atomic precision advanced manufacturing (APAM). It is desirable to expand this set of precursors to include dopants with organic functional groups and here we consider aluminium alkyls, to expand the applicability of APAM. We explore the impurity content and selectivity that results from using trimethyl aluminium and triethyl aluminium precursors on Si(001) to ultradope with aluminium through a hydrogen mask. Comparison of the methylated and ethylated precursors helps us understand the impact of hydrocarbon ligand selection on incorporation surface chemistry. Combining scanning tunneling microscopy and density functional theory calculations, we assess the limitations of both classes of precursor and extract general principles relevant to each.

Catalytic Activity of Beta-Cyclodextrin-Gold Nanoparticles Network in Hydrogen Evolution Reaction

The current climate crisis warrants investigation into alternative fuel sources. The hydrolysis reaction of an aqueous hydride precursor, and the subsequent production of hydrogen gas, prove to be a viable option. A network of beta-cyclodextrin capped gold nanoparticles (BCD-AuNP) was synthesized and subsequently characterized by Powder X-Ray Diffraction (P-XRD), Fourier Transform Infrared (FTIR), Transmission Electron Microscopy (TEM), and Ultraviolet-Visible Spectroscopy (UV-VIS) to confirm the presence of gold nanoparticles as well as their size of approximately 8 nm. The catalytic activity of the nanoparticles was tested in the hydrolysis reaction of sodium borohydride. The gold catalyst performed best at 303 K producing 1.377 mL min−1 mLcat−1 of hydrogen. The activation energy of the catalyst was calculated to be 54.7 kJ/mol. The catalyst resisted degradation in reusability trials, continuing to produce hydrogen gas in up to five trials.

Mixed-dimensional InAs nanowire on layered molybdenum disulfide heterostructures via selective-area van der Waals epitaxy.

Self-assembly of vertically aligned III–V semiconductor nanowires (NWs) on two-dimensional (2D) van der Waals (vdW) nanomaterials allows for integration of novel mixed-dimensional nanosystems with unique properties for optoelectronic and nanoelectronic device applications. Here, selective-area vdW epitaxy (SA-vdWE) of InAs NWs on isolated 2D molybdenum disulfide (MoS2) domains is reported for the first time. The MOCVD growth parameter space (i.e., V/III ratio, growth temperature, and total molar flow rates of metalorganic and hydride precursors) is explored to achieve pattern-free positioning of single NWs on isolated multi-layer MoS2 micro-plates with one-to-one NW-to-MoS2 domain placement. The introduction of a pre-growth poly-l-lysine surface treatment is highlighted as a necessary step for mitigation of InAs nucleation along the edges of triangular MoS2 domains and for NW growth along the interior region of 2D micro-plates. Analysis of NW crystal structures formed under the optimal SA-vdWE condition revealed a disordered combination of wurtzite and zinc-blend phases. A transformation of the NW sidewall faceting structure is observed, resulting from simultaneous radial overgrowth during axial NW synthesis. A common lattice arrangement between axially-grown InAs NW core segments and MoS2 domains is described as the epitaxial basis for vertical NW growth. A model is proposed for a common InAs/MoS2 sub-lattice structure, consisting of three multiples of the cubic InAs unit cell along the [21̄1̄] direction, commensurately aligned with a 14-fold multiple of the Mo–Mo (or S–S) spacing along the [101̄0] direction of MoS2 hexagonal lattice. The SA-vdWE growth mode described here enables controlled hybrid integration of mixed-dimensional III–V-on-2D heterostructures as novel nanosystems for applications in optoelectronics, nanoelectronics, and quantum enabling technologies.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2.

A novel β-diketiminate stabilized gallium hydride, (Dipp L)Ga(Ad)H (where (Dipp L)={HC(MeCDippN)2 }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ1 -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C6 F5 )3 , (Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO2 . Under stoichiometric conditions, the addition of one equivalent of B(C6 F5 )3 to (Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(Dipp L)Ga(Ad)][HB(C6 F5 )3 ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO2 to the formaldehyde oxidation level at 60 °C in the presence of Et3 SiH (yielding H2 C(OSiEt3 )2 ). When catalysis is undertaken in the presence of excess B(C6 F5 )3 , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H2 C(OSiEt3 )2 , CH4 and O(SiEt3 )2 . While this system represents proof-of-concept in CO2 hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (Dipp L)Ga(Ad){OC(H)OB(C6 F5 )3 }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(Dipp L)Ga(Ad)]+ cation (AN=69.8).

Synthesis and Photoluminescence Properties of Rare-Earth-Activated Sr3-xAxAlO4H (A = Ca, Ba; x = 0, 1): New Members of Aluminate Oxyhydrides.

A series of aluminate-based oxyhydrides, Sr3-xAxAlO4H (A = Ca, Ba; x = 0, 1), has been synthesized by high-temperature reaction of oxide and hydride precursors under a H2 atmosphere. Their crystal structures determined via X-ray and neutron powder diffraction are isostructural with tetragonal Sr3AlO4F (space group I4/mcm), consisting of (Sr1-x/3Ax/3)2H layers and isolated AlO4 tetrahedra. Rietveld refinement based on the diffraction patterns and bond-valence-sum analysis show that Ba preferentially occupies the 10-coordinated Sr1 sites, while Ca strongly prefers to occupy the 8-coordinated Sr2 sites. Luminescence owing to the 4f-5d transition of Eu2+ or Ce3+ was observed from Eu- and Ce-doped samples, Sr3-x-yAxByAlO4H (A = Ca, Ba; B = Eu, Ce; x = 0, 1, y = 0.02), under excitation of near-ultraviolet light. Compared with its fluoride analogue, Sr3AlO4H:Ce3+ shows red shifts of both the excitation and emission bands, which is consistent with the reported hydride-based phosphors and can be explained by the covalency of the hydride ligands. The observed luminescence spectra can be decomposed into two sets of sub-bands corresponding to Ce3+ centers occupying Sr1 and Sr2 sites with distinctly different Stokes shifts (1.27 and 0.54 eV, respectively), as suggested by the results of constrained density functional theory (cDFT). The cDFT results also suggest that the large shift for Ce3+ at Sr1 is induced by large distortion of the coordinated structure with shortening of the H-Ce bond in the excited state. The current findings expand the class of oxyhydride materials and show the potential of hydride-based phosphors for optical applications.

Superconductor-in-an-Hour: Spark Plasma Synthesis of Co- and Ni-Doped BaFe2As2

BaFe2As2 superconductors doped with Co or Ni were synthesized by heat treatment of the reactive BaH2 precursor and elemental Fe, Co, Ni, and As in a sealed niobium container. The hydride route provides better mixing of the starting materials, resulting in faster preparation of the target phases. The hydrogen gas evolved during sintering facilitates the preparation of the oxygen-free powders. Using powder X-ray diffraction (PXRD), including low-temperature synchrotron PXRD, it was shown that this route leads to successful doping of the Co (Ni) dopant and that the actual dopant content in the produced powdered samples of BaFe2–xCoxAs2 (0 ≤ x ≤ 0.4) and BaFe2–xNixAs2 (0 ≤ x ≤ 0.18) is close to the nominal content. The optimally doped samples of BaFe2–xCoxAs2 and BaFe2–xNixAs2 exhibit bulk superconducting properties. The highest Tc for the Co-doped sample is 24 K when x = 0.15–0.175 and 21 K for the Ni-doped sample when x ∼ 0.1. The reaction mechanism between the BaH2 hydride precursor and elemental Fe and As was studied by operando high-temperature synchrotron PXRD. The formation of the target BaFe2As2 phase occurs at the relatively low temperature of 785 K with binary iron arsenide (FeAs) being an intermediate product. Finally, the in situ combined synthesis and sintering of the intimately mixed BaH2 and Fe, Co, and As was performed inside the spark plasma sintering apparatus to obtain compact pellets of the BaFe2–xCoxAs2 superconductors. A higher sintering temperature (>873 K) is needed to ensure a homogeneous Co dopant distribution and, thus, the abrupt superconducting transitions.

Palladium-Catalyzed Hydride Addition/C–H Bond Activation Cascade: Cycloisomerization of 1,6-Diynes

The use of ammonium halide salts as metal hydride precursors in a new Pd-catalyzed cycloisomerization of 1,6-diynes, which affords unexplored silylated 2-azafluorenes, is reported. This cascade process includes the addition of a Pd-hydride species to a π-system, intramolecular carbopalladation, and C(sp2)-H bond activation. A variety of functional groups are tolerated, and the synthetic utility of the resulting products has been demonstrated by a series of derivatizations.

Abrupt SiGe-to-Si interface: influence of chemical vapor deposition processes and characterization by different metrology techniques

Future electronic (gate-all-around transistors) and photonic devices (electro-absorption modulator and laser stack) will require SiGe/Si multilayer stacks with abrupt interfaces. Chemical vapor deposition (CVD) is a proven method to epitaxially grow such multilayer structures. However, the abruptness of the compositional change is limited by Ge segregation occurring during Si layer growth on a (Si)Ge surface. Here, we study the compositional abruptness at the interface between Si0.70Ge0.30 and Si layers epitaxially grown in a CVD reactor. The ultra-thin interface layer between SiGe and Si is characterized by transmission electron microscopy, secondary ion mass spectrometry and spectroscopic ellipsometry (SE). Our results show that a Si layer grown using a chlorinated chemistry produces the most abrupt interface. For Si deposition processes with non-chlorinated chemistry, lower growth temperature and a higher order hydride precursor result in a reduced transition thickness. Furthermore, we show that the interface thickness measured by the different metrology techniques are in good agreement, suggesting that SE can be used to evaluate the ultra-thin interface at the Si0.70Ge0.30-to-Si interface, resulting in considerably shorter development time in a production environment.

Palladium-Catalyzed Reductive Coupling Reaction of Terminal Alkynes with Aryl Iodides Utilizing Hafnocene Difluoride as a Hafnium Hydride Precursor Leading to trans-Alkenes.

Herein, we describe a reductive cross-coupling of alkynes and aryl iodides by using a novel catalytic system composed of a catalytic amount of palladium dichloride and a promoter precursor, hafnocene difluoride (Cp2 HfF2 , Cp=cyclopentadienyl anion), in the presence of a mild reducing reagent, a hydrosilane, leading to a one-pot preparation of trans-alkenes. In this process, a series of coupling reactions efficiently proceeds through the following three steps: (i) an initial formation of hafnocene hydride from hafnocene difluoride and the hydrosilane, (ii) a subsequent hydrohafnation toward alkynes, and (iii) a final transmetalation of the alkenyl hafnium species to a palladium complex. This reductive coupling could be chemoselectively applied to the preparation of trans-alkenes with various functional groups, such as an alkyl group, a halogen, an ester, a nitro group, a heterocycle, a boronic ester, and an internal alkyne.

Electrophile-promoted Fe-to-N2 hydride migration in highly reduced Fe(N2)(H) complexes.

One of the emerging challenges associated with developing robust synthetic nitrogen fixation catalysts is the competitive formation of hydride species that can play a role in catalyst deactivation or lead to undesired hydrogen evolution reactivity (HER). It is hence desirable to devise synthetic systems where metal hydrides can migrate directly to coordinated N2 in reductive N-H bond-forming steps, thereby enabling productive incorporation into desired reduced N2-products. Relevant examples of this type of reactivity in synthetic model systems are limited. In this manuscript we describe the migration of an iron hydride (Fe-H) to Nα of a disilylhydrazido(2-) ligand (Fe[double bond, length as m-dash]NNR2) derived from N2 via double-silylation in a preceding step. This is an uncommon reactivity pattern in general; well-characterized examples of hydride/alkyl migrations to metal heteroatom bonds (e.g., (R)M[double bond, length as m-dash]NR' → M-N(R)R') are very rare. Mechanistic data establish the Fe-to-Nα hydride migration to be intramolecular. The resulting disilylhydrazido(1-) intermediate can be isolated by trapping with CN t Bu, and the disilylhydrazine product can then be liberated upon treatment with an additional acid equivalent, demonstrating the net incorporation of an Fe-H equivalent into an N-fixed product.

Synthesis and Mechanism of Formation of Hydride-Sulfide Complexes of Iron.

Iron-sulfide complexes with hydride ligands provide an experimental precedent for spectroscopically detected hydride species on the iron-sulfur MoFe7S9C cofactor of nitrogenase. In this contribution, we expand upon our recent synthesis of the first iron sulfide hydride complex from an iron hydride and a sodium thiolate ( Arnet, N. A.; Dugan, T. R.; Menges, F. S.; Mercado, B. Q.; Brennessel, W. W.; Bill, E.; Johnson, M. A.; Holland, P. L., J. Am. Chem. Soc. 2015 , 137 , 13220 - 13223 ). First, we describe the isolation of an analogous iron sulfide hydride with a smaller diketiminate supporting ligand, which benefits from easier preparation of the hydride precursor and easier isolation of the product. Second, we describe mechanistic studies on the C-S bond cleavage through which the iron sulfide hydride product is formed. In a key experiment, use of cyclopropylmethanethiolate as the sulfur precursor leads to products from cyclopropane ring opening, implicating an alkyl radical as an intermediate. Combined with the results of isotopic labeling studies, the data are consistent with a mechanism in which homolytic C-S bond cleavage is followed by rebound of the alkyl radical to abstract a hydrogen atom from iron to give the observed alkane and iron-sulfide products.

Polyelectrochromism and electronic coupling in vinylruthenium-modified carbazoles

Six carbazole-derived mono-, di- and trinuclear ruthenium complexes featuring one to three square pyramidal, five-coordinated {Ru(CO)Cl(PiPr3)2(CHCH-)} entities were prepared by the regio- and stereospecific insertion of the hydride precursor HRu(CO)Cl(PiPr3)2 into the CC bond of the corresponding ethynylated N-substituted carbazoles. They were characterized by IR, UV/Vis, and NMR spectroscopy, electrochemistry, and, in up to four different oxidation states, by UV/Vis/NIR and IR spectroelectrochemistry. Their radical cations were additionally investigated by EPR spectroscopy. Experimental studies are complemented by (TD-)DFT calculations. Electrochemical studies on these complexes showed two to four reversible, consecutive one-electron oxidation processes. Half-wave potential separations ΔE½ between individual redox-waves and the derived comproportionation constants Kc indicate that intermediate oxidation states are sufficiently stable with respect to disproportionation to be generated and investigated in solution. Spectroscopic data indicate strong carbazole ligand contributions to every oxidation and notable involvement of the vinylruthenium moieties to the lower oxidation steps. UV/Vis/NIR spectroelectrochemistry reveals a polyelectrochomic behavior of all complexes with, however, less pronounced absorptivities when compared to the simple triarylamine counterparts. The pattern of two separate, moderately spaced Ru(CO) bands for the MV radical cations IIa+, IIb+ and III+ indicates that the unipositive charge is unevenly distributed over the two chemically equivalent vinylruthenium subunits.

Development of a heat storage demonstration unit on the basis of Mg2FeH6 as heat storage material and molten salt as heat transfer media

The development and preliminary tests of a 5 kg Mg2FeH6 heat storage system which is useable for short and long-term storage applications at temperatures around 500 °C are described. The heat transfer for the heat storage process (dehydrogenation of the hydride Mg2FeH6) and heat release (hydrogenation of the hydride precursor 2Mg-Fe) is done by the flow of molten salt in appropriate heat exchangers serving as heat source or heat sink. The construction of the tube bundle reactor as a heat storage tank is presented. 1.6 kWh of heat could be released and 1.5 kWh of heat could be stored during the first experimental tests. Difficulties, which occured during the preliminary tests, are described.

The Synergic Effect of Atomic Hydrogen Adsorption and Catalyst Spreading on Ge Nanowire Growth Orientation and Kinking

Hydride precursors are commonly used for semiconductor nanowire growth from the vapor phase and hydrogen is quite often used as a carrier gas. Here, we used in situ scanning electron microscopy and spatially resolved Auger spectroscopy to reveal the essential role of atomic hydrogen in determining the growth direction of Ge nanowires with an Au catalyst. With hydrogen passivating nanowire sidewalls the formation of inclined facets is suppressed, which stabilizes the growth in the ⟨111⟩ direction. By contrast, without hydrogen gold diffuses out of the catalyst and decorates the nanowire sidewalls, which strongly affects the surface free energy of the system and results in the ⟨110⟩ oriented growth. The experiments with intentional nanowire kinking reveal the existence of an energetic barrier, which originates from the kinetic force needed to drive the droplet out of its optimum configuration on top of a nanowire. Our results stress the role of the catalyst material and surface chemistry in determining the nanowire growth direction and provide additional insights into a kinking mechanism, thus allowing to inhibit or to intentionally initiate spontaneous kinking.

Tuning Thermoelectric Properties of Type I Clathrate K8–xBaxAl8+xSi38–x through Barium Substitution

The thermal stability and thermoelectric properties of type I clathrate K8Al8Si38 up to 873 K are reported. K8Al8Si38 possesses a high absolute Seebeck coefficient value and high electrical resistivity in the temperature range of 323 to 873 K, which is consistent with previously reported low temperature thermoelectric properties. Samples with Ba partial substitution at the K guest atom sites were synthesized from metal hydride precursors. The samples with the nominal chemical formula of K8–xBaxAl8+xSi38–x (x = 1, 1.5, 2) possess type I clathrate structure (cubic, Pm3n), confirmed by X-ray diffraction. The guest atom site occupancies and thermal motions were investigated with Rietveld refinement of synchrotron powder X-ray diffraction. Transport properties of Ba-containing samples were characterized from 2 to 300 K. The K–Ba alloy phases showed low thermal conductivity and improved electrical conductivity compared to K8Al8Si38. Electrical resistivity and Seebeck coefficients were measured over the tempera...

ChemInform Abstract: Synthesis and Structural Characterization of Ammonio/Hydroxo Undecachloro‐closo‐Dodecaborates [B12Cl11NH3]‐/ [B12Cl11OH]2‐ and Their Derivatives.

AbstractThe [B12Cl11NH3]‐ anion in (IV) and [B12Cl11OH]2‐ in (VIII) are prepared by chlorination of the corresponding hydride precursors with SO2Cl2 instead of SbCl5 or gaseous Cl2.