Hydride Acceptor Research Articles

Glycerol 3-Phosphate Dehydrogenase Catalyzed Hydride Transfer: Enzyme Activation by Cofactor Pieces.

Glycerol 3-phosphate dehydrogenase catalyzes reversible hydride transfer from glycerol 3-phosphate (G3P) to NAD+ to form dihydroxyacetone phosphate; from the truncated substrate ethylene glycol to NAD+ in a reaction activated by the phosphite dianion substrate fragment; and from G3P to the truncated nicotinamide riboside cofactor in a reaction activated by adenosine 5'-diphosphate, adenosine 5'-monophosphate, and ribose 5-phosphate cofactor fragments. The sum of the stabilization of the transition state for GPDH-catalyzed hydride transfer reactions of the whole substrates by the phosphodianion fragment of G3P and the ADP fragment of NAD+ is 25 kcal/mol. Fourteen kcal/mol of this transition state stabilization is recovered as phosphite dianion and AMP activation of the reactions of the substrate and cofactor fragments. X-ray crystal structures for unliganded GPDH, for a binary GPDH·NAD+ complex, and for a nonproductive ternary GPDH·NAD+·DHAP complex show that the ligand binding energy is utilized to drive an extensive protein conformational change that creates a caged complex for these ligands. The phosphite dianion and AMP fragments are proposed to activate GPDH for the catalysis of hydride transfer by stabilization of this active caged complex. The closure of a conserved loop [292-LNGQKL-297] during substrate binding stabilizes the G3P and NAD+ complexes by interactions, respectively, with the Q295 and K296 loop side chains. The appearance and apparent conservation of two side chains that interact with the hydride donor and acceptor to stabilize the active closed enzyme are proposed to represent a significant improvement in the catalytic performance of GPDH.

Stepwise Reduction of Redox Noninnocent Nitrosobenzene to Aniline via a Rare Phenylhydroxylamino Intermediate on a Thiolate-Bridged Dicobalt Scaffold.

Nitrosobenzene (PhNO) and phenylhydroxylamine (PhNHOH) are of paramount importance because of their involvement as crucial intermediates in the biological metabolism and catalytic transformation of nitrobenzene (PhNO2) to aniline (PhNH2). However, a complete reductive transformation cycle of PhNO to PhNH2 via the PhNHOH intermediate has not been reported yet. In this context, we design and construct a new thiolate-bridged dicobalt scaffold that can accomplish coordination activation and reductive transformation of PhNO. Notably, an unprecedented reversible ligand-based redox sequence PhNO0 ↔ PhNO•- ↔ PhNO2- can be achieved on this well-defined {CoIII(μ-SPh)2CoIII} functional platform. Further detailed reactivity investigations demonstrate that the PhNO0 and PhNO•- complexes cannot react with the usual hydrogen and hydride donors to afford the corresponding phenylhydroxylamino (PhNHO-) species. However, the double reduced PhNO2- complex can readily undergo N-protonation with an uncommon weak proton donor PhSH to selectively yield a stable dicobalt PhNHO- bridged complex with a high pKa value of 13-16. Cyclic voltammetry shows that there are two successive reduction events at E1/2 = -0.075 V and Ep = -1.08 V for the PhNO0 complex, which allows us to determine both bond dissociation energy (BDEN-H) of 59-63 kcal·mol-1 and thermodynamic hydricity (ΔGH-) of 71-75 kcal·mol-1 of the PhNHO- complex. Both values indicate that the PhNO•- complex is not a potent hydrogen abstractor and the PhNO0 complex is not an efficient hydride acceptor. In the presence of BH3 as a combination of protons and electrons, facile N-O bond cleavage of the coordinated PhNHO- group can be realized to generate PhNH2 and a dicobalt hydroxide-bridged complex. Overall, we present the first stepwise reductive sequence, PhNO0 ↔ PhNO•- ↔ PhNO2- ↔ PhNHO- → PhNH2.

Structural Effects on the Temperature Dependence of Hydride Kinetic Isotope Effects of the NADH/NAD+ Model Reactions in Acetonitrile: Charge-Transfer Complex Tightness Is a Key.

It has recently frequently been found that the kinetic isotope effect (KIE) is independent of temperature (T) in H-tunneling reactions in enzymes but becomes dependent on T in their mutants. Many enzymologists found that the trend is related to different donor-acceptor distances (DADs) at tunneling-ready states (TRSs), which could be sampled by protein dynamics. That is, a more rigid system of densely populated short DADs gives rise to a weaker T dependence of KIEs. Theoreticians have attempted to develop H-tunneling theories to explain the observations, but none have been universally accepted. It is reasonable to assume that the DAD sampling concept, if it exists, applies to the H-transfer reactions in solution, as well. In this work, we designed NADH/NAD+ model reactions to investigate their structural effects on the T dependence of hydride KIEs in acetonitrile. Hammett correlations together with N-CH3/CD3 secondary KIEs were used to provide the electronic structure of the TRSs and thus the rigidity of their charge-transfer complexation vibrations. In all three pairs of reactions, a weaker T dependence of KIEs always corresponds to a steeper Hammett slope on the substituted hydride acceptors. It was found that a tighter/rigid charge-transfer complexation system corresponds with a weaker T dependence of KIEs, consistent with the observations in enzymes.

Hydrogen Reduction Reduction (HRR)

The year 2023 marks the bicentennial of the discovery of heterogeneous H2 catalysis. Nowadays, the hydrogen oxidation reaction (HOR), which converts H2 to protons (H+), is one of the most important transformations in energy research. Meanwhile, hydrogenation reactions, which transfer net H-atoms (H·) to organic substrates from H2, play pivotal roles in various chemical industries. In comparison, it is surprising to see that a heterogenous catalytic reaction that directly converts H2 to hydrides (H–) still remains elusive. Hydride transfer is a critical elementary reaction step that spans biological catalysis, organic synthesis and energy conversion. Conventionally, hydride transfer reactions are performed using (bio)molecular hydride reagents under homogeneous conditions. Here we report a conceptually distinct heterogeneous hydride transfer reaction via the net electrocatalytic hydrogen reduction reaction (HRR), which reduces H2 to hydrides. The reaction proceeds by H2 dissociative adsorption on a metal electrode to form surface M−H species, which are then negatively polarized to drive hydride transfer to molecular hydride acceptors with up to 91% Faradaic efficiency. The hydride transfer reactivity of surface M−H species is highly tunable, and, depending on the electrode potential, the thermodynamic hydricity of Pt−H on the same Pt electrode can continuously span a range of >40 kcal/mol.In addition to this electrochemical transformation, we further developed an alternative strategy to achieve heterogeneous hydride transfer on dispersed metal catalysts under non-electrochemical conditions. In the presence of a base, deprotonation of surface M-H builds up electron density at the metal surface and thereby causes spontaneous polarization which can then drive hydride transfer from metal nanoparticles. Based on this, HRR can be performed under standard hydrogenation conditions with the addition of a base using dispersed metal catalysts, and the surface hydricity is now controlled by the solution basicity. We further demonstrate that this non-electrochemical HRR method can be applied to NADH regeneration which is closely related to industrial biocatalysis. The discovery of HRR reveals the fundamental hydride transfer reactivity of surface M-H species as well as its polarization-dependent nature. Both the electrochemical and non-electrochemical HRR methods establish sustainable strategies for accessing reactive hydrides directly from H2. Figure 1

Essential Rule Derived from Thermodynamics and Kinetics Studies of Benzopyran Compounds.

Compounds with benzopyran as the core structure play an important role in the total synthesis of antioxidants, drugs, and natural products. Herein, the thermodynamic data of benzopyran compounds and their intermediates were measured and calculated by combining thermodynamics with kinetics. The mechanism of reactions between four benzopyran compounds and organic hydride acceptors was proven to be a one-step hydride transfer. The thermodynamic properties of these compounds and their corresponding intermediates were elucidated. The rationality and accuracy of the electrochemical measurement method were proved. Furthermore, the essential rule of unique structures being present between the C-H bond and para-substituent constants on the benzene ring, as shown in previous studies, was investigated. A simultaneous correlation between thermodynamics and kinetics was found for the hydride transfer reaction, in which the reaction site is connected with the substituent through the benzene ring, a double bond, or a N atom. The likely reason for the correlation between thermodynamic and kinetic is that the benzene ring, double bond, or N atom have the role of transferring the electronic effect. This finding can be applied to the calculation of the activation energy of hydride self-exchange reactions, the prediction of kinetic isotope effects, and explorations of selective reduction processes of hydride transfer in such organic hydride compounds.

Aluminum(III) Cations [(NHC) ⋅ AlMes2 ]+ : Synthesis, Characterization, and Application in FLP-Chemistry.

The three-coordinate aluminum cations ligated by N-heterocyclic carbenes (NHCs) [(NHC) ⋅ AlMes2 ]+ [B(C6 F5 )4 ]- (NHC=IMeMe 4, IiPrMe 5, IiPr 6, Mes=2,4,6-trimethylphenyl) were prepared via hydride abstraction of the alanes (NHC) ⋅ AlHMes2 (NHC=IMeMe 1, IiPrMe 2, IiPr 3) using [Ph3 C]+ [B(C6 F5 )4 ]- in toluene as hydride acceptor. If this reaction was performed in diethyl ether, the corresponding four-coordinate aluminum etherate cations [(NHC) ⋅ AlMes2 (OEt2 )]+ [B(C6 F5 )4 ]- 7-9 (NHC=IMeMe 7, IiPrMe 8, IiPr 9) were isolated. According to a theoretical and experimental assessment of the Lewis-acidity of the [(IMeMe ) ⋅ AlMes2 ]+ cation is the acidity larger than that of B(C6 F5 )3 and of similar magnitude as reported for Al(C6 F5 )3 . The reaction of [(IMeMe ) ⋅ AlMes2 ]+ [B(C6 F5 )4 ]- 4 with the sterically less demanding, basic phosphine PMe3 afforded a mixed NHC/phosphine stabilized cation [(IMeMe ) ⋅ AlMes2 (PMe3 )]+ [B(C6 F5 )4 ]- 10. Equimolar mixtures of 4 and the sterically more demanding PCy3 gave a frustrated Lewis-pair (FLP), i.e., [(IMeMe ) ⋅ AlMes2 ]+ [B(C6 F5 )4 ]- /PCy3 FLP-11, which reacts with small molecules such as CO2 , ethene, and 2-butyne.

Aluminium(III)‐Kationen [(NHC) ⋅ AlMes2]+: Synthese, Charakterisierung und Anwendung in der FLP‐Chemie

AbstractDie NHC‐stabilisierten, dreifach‐koordinierten Kationen [(NHC) ⋅ AlMes2]+[B(C6F5)4]− (NHC=IMeMe 4, IiPrMe 5, IiPr 6, Mes=2,4,6‐Trimethylphenyl) wurden durch Hydrid‐Abstraktion ausgehend von den Alanen (NHC) ⋅ AlHMes2 (NHC=IMeMe 1, IiPrMe 2, IiPr 3) mit [Ph3C]+[B(C6F5)4]− als Hydrid‐Akzeptor in Toluol dargestellt. Bei Reaktion in Diethylether wurden die entsprechenden vierfach‐koordinierten kationischen Aluminium‐Etherate [(NHC) ⋅ AlMes2 (OEt2)]+ [B(C6F5)4]− 7–9 (NHC=IMeMe 7, IiPrMe 8, IiPr 9) isoliert. Eine theoretische und experimentelle Evaluierung der Lewis‐Azidität des Kations [(IMeMe) ⋅ AlMes2]+ ergab eine Lewis‐Azidität dieses Kations, welche in einem ähnliche Bereich liegt wie die von Al(C6F5)3 und größer ist als diejenige von B(C6F5)3. Die Reaktion von [(IMeMe) ⋅ AlMes2]+[B(C6F5)4]− 4 mit dem sterisch wenig anspruchsvollen, basischen Phosphan PMe3 führte zum gemischt NHC/Phosphan‐stabilisierten Kation [(IMeMe) ⋅ AlMes2(PMe3)]+[B(C6F5)4]− 10. Äquimolare Mischungen, bestehend aus 4 und dem sterisch anspruchsvolleren Phosphan PCy3, ergeben ein frustriertes Lewis‐Paar (FLP) [(IMeMe) ⋅ AlMes2]+[B(C6F5)4]−//PCy3 FLP‐11, welches mit kleinen Molekülen wie CO2, Ethen und 2‐Butin reagiert.

Erweiterung des Reaktionsspektrums: Nachweis des 5‐Deazaflavin‐Radikals durch photochemisch induzierte dynamische Kernpolarisation

AbstractDeazaflavine sind wichtige Analoga der natürlich vorkommenden Flavine, Riboflavin, Flavinmononukleotid (FMN) und Flavin‐Adenin‐Dinukleotid (FAD). Durch Austausch des natürlichen Kofaktors mit dem entsprechenden 5‐Deazaflavin konnten in einer Reihe von Flavoproteinen wichtige Erkenntnisse zum Reaktionsmechanismus gewonnen sowie deren Reaktivität beeinflusst werden. Es wurde häufig beobachtet, dass Ein‐Elektronentransfer‐Reaktionen in Flavoproteinen mit 5‐Deazaflavin als Kofaktor eingeschränkt sind. Hieraus wurde gefolgert, dass der im Vergleich mit dem entsprechenden Flavinsemichinon geringeren Stabilität des 5‐Deazaflavin‐Radikals rasch ablaufende Reoxidations‐ und Disproportionierungsreaktionen zugrunde liegen. Das vermeintliche Paradigma, wonach 5‐Deazaflavin lediglich als Zwei‐Elektronen‐ bzw. Hydrid‐Akzeptor/Donor fungiert, sozusagen ein “nicotinamide in flavin clothing” darstellt, muss nun durch die unter biologisch relevanten Reaktionsbedingungen erfolgte indirekte Beobachtung einer einfach reduzierten (paramagnetischen) Spezies mit Hilfe der 1H‐photo‐CIDNP‐NMR (photo‐CIDNP: photo‐chemisch induzierte dynamische Kernpolarisation) neu bewertet werden.

Expanding Reaction Horizons: Evidence of the 5-Deazaflavin Radical Through Photochemically Induced Dynamic Nuclear Polarization.

Deazaflavins are important analogues of the naturally occurring flavins: riboflavin, flavin mononucleotide (FMN), and flavin adenine dinucleotide (FAD). The use of 5-deazaflavin as a replacement coenzyme in a number of flavoproteins has proven particularly valuable in unraveling and manipulating their reaction mechanisms. It was frequently reported that one-electron-transfer reactions in flavoproteins are impeded with 5-deazaflavin as the cofactor. Based on these findings, it was concluded that the 5-deazaflavin radical is significantly less stable compared to the respective flavin semiquinone and quickly re-oxidizes or undergoes disproportionation. The long-standing paradigm of 5-deazaflavin being solely a two-electron/hydride acceptor/donor-"a nicotinamide in flavin clothing"-needs to be re-evaluated now with the indirect observation of a one-electron-reduced (paramagnetic) species using photochemically induced dynamic nuclear polarization (photo-CIDNP) 1 H nuclear magnetic resonance (NMR) under biologically relevant conditions.

On the chemistry of Beckurt’s test for physostigmine: A novel hydride transfer

Beckurt treated physostigmine hydrochloride with dilute potassium permanganate solution and observed separation of manganese dioxide. Since at first sight there is no reaction site for this oxidation, it was interesting to clear up the reaction route of this test. Acid hydrolysis of this O-phenylcarbamate yielded the phenolic derivative of the three-ring indole alkaloid hydrochloride. Now are present at para-position an electrodotic group and a positive charged nitrogen atom. However, this nitrogen has an octet of electrons; thus, for reaction to occur a hydride ion must be displaced. This can happen in the presence of a hydride acceptor, that is, by reduction of permanganate ion. This chemical deportment has been postulated recently in a completely different reaction sequence. So, our proposal is a novel one. The mechanism of the following inorganic steps to the final product has not been advanced, and it is provided in this communication.

Tertiary Amine-Mediated Reductions of Phosphine Oxides to Phosphines.

The reduction of phosphine oxides without the use of highly reactive reductants represents a safer and more sustainable solution for recycling of organophosphorus compounds. Herein, we disclose an N,N,N',N'-tetramethylethylenediamine (TMEDA)-mediated reduction via an unusual intermolecular hydride transfer. Mechanistic studies suggest that TMEDA serves as a hydride donor, while the P(V) halophosphonium salt acts as the hydride acceptor. This methodology provides a scalable and efficient protocol to reduce phosphine oxides under mild conditions.

Mechanisms and Kinetics of the Dehydrogenation of C6–C8 Cycloalkanes, Cycloalkenes, and Cyclodienes to Aromatics in H-MFI Zeolite Framework

This work employs periodic density functional theory to elucidate dehydrogenation mechanisms of C6–C8 cycloalkanes, cycloalkenes, and cyclodienes into aromatics during methanol-to-olefin (MTO) chemistries in H-MFI zeolites. Aromatic compounds act as co-catalysts that predominantly form ethylene over propylene products and lead to site-blocking polyaromatic compounds; thus, understanding the formation of aromatic compounds during MTO is critical to understanding its selectivity and catalyst stability. Ring dehydrogenation reactions occur via sequential hydride transfer followed by deprotonation. The rate-controlling hydride transfer reactions were investigated with surface-bound protons (Z–H) and alkyls (Z–CnH2n+1) as hydride-accepting species. Hydride transfers via proton-mediated routes occur with intrinsic free energy barriers (623 K) of 215 kJ mol–1 for C6H12, 164 kJ mol–1 for C6H10, and 141 kJ mol–1 for C6H8, whereas methyl-mediated counterparts occur with intrinsic free barriers of 101, 95, and 81 kJ mol–1, respectively. Transition states for hydride transfer reactions prefer channel intersections within MFI networks, and their activation barriers suggest that methyl-mediated routes are favored over proton-mediated counterparts during MTO. Methyl substituents on hydrocarbon rings generally increase activation barriers for hydride transfers that occur proximal to the −CH3, partly because of steric hindrances between the hydride acceptor and ring-bound −CH3. Rapid double-bond isomerization within cyclohexenes and cyclohexadienes allows hydride transfer reactions to occur away from sterically hindering methyl substituents in methylated and dimethylated C6 ring hydrocarbons. The impact of carbocation substitution in hydride-accepting species was explored by contrasting barriers of methyl (Z–CH3), ethyl (Z–C2H5), 2-propyl (Z–C3H7), and tert-butyl (Z–C4H9) surface-bound alkyls. Intrinsic activation barriers decrease with increasing substitution of the alkyl hydride acceptor, consistent with those alkyls forming more stable carbocations. However, when accounting for steric hindrances associated with the co-adsorption of hydrocarbon rings near surface-bound alkyls, apparent free barriers are larger for more-substituted alkyls. Taking these apparent barriers into account, we predict that methyl-mediated hydride transfer reactions are responsible for the aromatization of hydrocarbon rings during MTO, leading to the CH4 formed during MTO reactions as the aromatic pool is enriched.

Advances in α-C(sp3)–H functionalization of ethers via cascade [1,n]-hydride transfer/cyclization

The α-C(sp3)–H functionalization of ethers via cascade [1,n]-hydride transfer/cyclization, which features redox-neutral nature, atom-economy, and high efficiency in the assembly of O-containing heterocycles, constitutes an attractive yet challenging research topic in organic synthesis. This comprehensive review highlights the impressive advances made in this realm during the past two decades, and the content is classified, for clarity, by the types of α-C(sp3)–H functionalization using different hydride acceptors. The proposed mechanisms, characteristics, limitations and directions in the future are presented as well.

Correlating Thermodynamic and Kinetic Hydricities of Rhenium Hydrides.

The kinetics of hydride transfer from Re(Rbpy)(CO)3H (bpy = 4,4'-R-2,2'-bipyridine; R = OMe, tBu, Me, H, Br, COOMe, CF3) to CO2 and seven different cationic N-heterocycles were determined. Additionally, the thermodynamic hydricities of complexes of the type Re(Rbpy)(CO)3H were established primarily using computational methods. Linear free-energy relationships (LFERs) derived by correlating thermodynamic and kinetic hydricities indicate that, in general, the rate of hydride transfer increases as the thermodynamic driving force for the reaction increases. Kinetic isotope effects range from inverse for hydride transfer reactions with a small driving force to normal for reactions with a large driving force. Hammett analysis indicates that hydride transfer reactions with greater thermodynamic driving force are less sensitive to changes in the electronic properties of the metal hydride, presumably because there is less buildup of charge in the increasingly early transition state. Bronsted α values were obtained for a range of hydride transfer reactions and along with DFT calculations suggest the reactions are concerted, which enables the use of Marcus theory to analyze hydride transfer reactions involving transition metal hydrides. It is notable, however, that even slight perturbations in the steric properties of the Re hydride or the hydride acceptor result in large deviations in the predicted rate of hydride transfer based on thermodynamic driving forces. This indicates that thermodynamic considerations alone cannot be used to predict the rate of hydride transfer, which has implications for catalyst design.

Luminescent Iridium Complexes with a Sulfurated Bipyridine Ligand: PCET Thermochemistry of the Disulfide Unit and Photophysical Properties.

Molecular systems combining light harvesting and charge storage are receiving great attention in the context of, for example, artificial photosynthesis and solar fuel generation. As part of ongoing efforts to develop new concepts for photoinduced proton-coupled electron transfer (PCET) reactivities, we report a cyclometallated iridium(III) complex [Ir(ppy)2(S-Sbpy)](PF6) ([1]PF6) equipped with our previously developed sulfurated bipyridine ligand S-Sbpy. A new one-step synthetic protocol for S-Sbpy is developed, starting from commercially available 2,2'-bipyridine, which significantly facilitates the use of this ligand. [1]+ features a two-electron reduction with potential inversion (|E1| > |E2|) at moderate potentials (E1 = -1.12, E2 = -1.11 V versus. Fc+/0 at 253 K), leading to a dithiolate species [1]-. Protonation with weak acids allows for determination of pKa = 23.5 in MeCN for the S-H···S- unit of [1H]. The driving forces for both the H atom and the hydride transfer are calculated to be ∼60 kcal mol-1 and verified experimentally by reaction with a suitable H atom and a hydride acceptor, demonstrating the ability of [1]+ to serve as a versatile PCET reagent, albeit with limited thermal stability. In MeCN solution, an orange emission for [1]PF6 from a triplet-excited state was found. Density functional calculations and ultrafast absorption spectroscopy are used to give insight into the excited-state dynamics of the complex and suggest a significantly stretched S-S bond for the lowest triplet-state T1. The structural responsiveness of the disulfide unit is proposed to open an effective relaxation channel toward the ground state, explaining the unexpectedly short lifetime of [1]+. These insights as well as the quantitative ground-state thermochemistry data provide valuable information for the use of S-Sbpy-functionalized complexes and their disulfide-/dithiol-directed PCET reactivity.

Discovering and Evaluating the Reducing Abilities of Polar Alkanes and Related Family Members as Organic Reductants Using Thermodynamics.

In this work, the pKa values of 69 polar alkanes (YH2) in acetonitrile were computed using the method developed by Luo and Zhang in 2020, and representative 69 thermodynamic network cards on 22 elementary steps of YH2 and related polar alkenes (Y) releasing or accepting H2 were naturally established. Potential electron reductants (YH-), hydride reductants (YH-), antioxidants (YH2 and YH-), and hydrogen molecule reductants (YH2) are unexpectedly discovered according to thermodynamic network cards. It is also found that there are great differences between YH2 and common hydrogen molecule reductants (XH2), such as Hantzsch ester (HEH2), benzothiazoline (BTH2), and dihydro-phenanthridine (PH2), releasing two hydrogen ions to unsaturated compounds. During the hydrogenation process, XH2 release hydrides first, then the oxidation state XH+ release protons. However, in the case of YH2, YH2 release protons first, then YH- release hydrides. It is the differences on acidic properties of YH2 and XH2 that result in the behavioral and thermodynamic differences on YH2 and XH2 releasing two hydrogen ions (H--H+). The redox mechanisms and behaviors of Y, YH-, and YH2 as electron, hydrogen atom, hydride, and hydrogen molecule donors or acceptors in the chemical reaction are reasonably investigated and discussed in this paper using thermodynamics.

Biomimetic Metal-Free Hydride Donor Catalysts for CO2 Reduction

The catalytic reduction of carbon dioxide to fuels and value-added chemicals is of significance for the development of carbon recycling technologies. One of the main challenges associated with catalytic CO2 reduction is product selectivity: the formation of carbon monoxide, molecular hydrogen, formate, methanol, and other products occurs with similar thermodynamic driving forces, making it difficult to selectively reduce CO2 to the target product. Significant scientific effort has been aimed at the development of catalysts that can suppress the undesired hydrogen evolution reaction and direct the reaction toward the selective formation of the desired products, which are easy to handle and store. Inspired by natural photosynthesis, where the CO2 reduction is achieved using NADPH cofactors in the Calvin cycle, we explore biomimetic metal-free hydride donors as catalysts for the selective reduction of CO2 to formate. Here, we outline our recent findings on the thermodynamic and kinetic parameters that control the hydride transfer from metal-free hydrides to CO2. By experimentally measuring and theoretically calculating the thermodynamic hydricities of a range of metal-free hydride donors, we derive structural and electronic factors that affect their hydride-donating abilities. Two dominant factors that contribute to the stronger hydride donors are identified to be (i) the stabilization of the positive charge formed upon HT via aromatization or by the presence of electron-donating groups and (ii) the destabilization of hydride donors through the anomeric effect or in the presence of significant structural constrains in the hydride molecule. Hydride donors with appropriate thermodynamic hydricities were reacted with CO2, and the formation of the formate ion (the first reduction step in CO2 reduction to methanol) was confirmed experimentally, providing an important proof of principle that organocatalytic CO2 reduction is feasible. The kinetics of hydride transfer to CO2 were found to be slow, and the sluggish kinetics were assigned in part to the large self-exchange reorganization energy associated with the organic hydrides in the DMSO solvent. Finally, we outline our approaches to the closure of the catalytic cycle via the electrochemical and photochemical regeneration of the hydride (R-H) from the conjugate hydride acceptors (R+). We illustrate how proton-coupled electron transfer can be efficiently utilized not only to lower the electrochemical potential at which the hydride regeneration takes place but also to suppress the unwanted dimerization that neutral radical intermediates tend to undergo. Overall, this account provides a summary of important milestones achieved in organocatalytic CO2 reduction and provides insights into the future research directions needed for the discovery of inexpensive catalysts for carbon recycling.

Selective Activation of Unstrained C(O)-C Bond in Ketone Suzuki-Miyaura Coupling Reaction Enabled by Hydride-Transfer Strategy.

A Rh(I)-catalyzed ketone Suzuki-Miyaura coupling reaction of benzylacetone with arylboronic acid is developed. Selective C(O)-C bond activation, which employs aminopyridine as a temporary directing group and ethyl vinyl ketone as a hydride acceptor, occurs on the alkyl chain containing a β-position hydrogen. A series of acetophenone products were obtained in yields up to 75%.

Merging dearomatization with redox-neutral C(sp3)–H functionalization via hydride transfer/cyclization: recent advances and perspectives

This review highlights the encouraging advances in hydride transfer-involved dearomatization reaction during the past decade, the content of which is categorized according to the hydride acceptors, namely vinylogous imines and quinone methides.

Kinetics of human pyrroline-5-carboxylate reductase in L-thioproline metabolism.

L-Thioproline (L-thiazolidine-4-carboxylate, L-T4C) is a cyclic sulfur-containing analog of L-proline found in multiple kingdoms of life. The oxidation of L-T4C leads to L-cysteine formation in bacteria, plants, mammals, and protozoa. The conversion of L-T4C to L-Cys in bacterial cell lysates has been attributed to proline dehydrogenase and L-Δ1-pyrroline-5-carboxylate (P5C) reductase (PYCR) enzymes but detailed kinetic studies have not been conducted. Here, we characterize the dehydrogenase activity of human PYCR isozymes 1 and 2 with L-T4C using NAD(P)+ as the hydride acceptor. Both PYCRs exhibit significant L-T4C dehydrogenase activity; however, PYCR2 displays nearly tenfold higher catalytic efficiency (136M-1s-1) than PYCR1 (13.7M-1s-1). Interestingly, no activity was observed with either L-Pro or the analog DL-thiazolidine-2-carboxylate, indicating that the sulfur at the 4-position is critical for PYCRs to utilize L-T4C as a substrate. Inhibition kinetics show that L-Pro is a competitive inhibitor of PYCR1 [Formula: see text] with respect to L-T4C, consistent with these ligands occupying the same binding site. We also confirm by mass spectrometry that L-T4C oxidation by PYCRs leads to cysteine product formation. Our results suggest a new enzyme function for human PYCRs in the metabolism of L-T4C.