Oligonucleotide Hybridization Research Articles

Evaluation of Thermal Stability of DNA Oligonucleotide Structures Embedded in Hydrogels

Understanding the self-assembly and hybridization properties of DNA oligonucleotides in confined spaces can help to improve their applications in biotechnology and nanotechnology. This study investigates the effects of spatial confinement in the pores of hydrogels on the thermal stability of DNA oligonucleotide structures. The preparation of oligonucleotides embedded in agarose gels was simple, whereas the preparation of oligonucleotides embedded in polyacrylamide gels was required to remove unpolymerized monomers. In the latter case, a method for rehydrating a washed dry gel with a buffer solution containing oligonucleotides was developed. Fluorescence measurements of oligonucleotides bearing fluorescent probes revealed no significant influence of the internal environment of the gel pores on the stability of DNA duplex, hairpin, and G-quadruplex structures. Moreover, the effects of poly(ethylene glycol) on the stability of DNA structures in the gels were similar to those in solutions. It is likely that the oligonucleotides are not strongly constrained in the gels and may be preferentially located in a water-rich environment in the gel matrix. The gel preparation was also applied to the assessment of the stability of DNA structures under the conditions of a reduced number of water molecules. The studies using hydrogels provide insights into the ability of self-assembly and hybridization of oligonucleotides in confined environments and under low-water-content conditions.

Detection of SARS-CoV-2 Virus by Triplex Enhanced Nucleic Acid Detection Assay (TENADA)

SARS-CoV-2, a positive-strand RNA virus has caused devastating effects. The standard method for COVID diagnosis is based on polymerase chain reaction (PCR). The method needs expensive reagents and equipment and well-trained personnel and takes a few hours to be completed. The search for faster solutions has led to the development of immunological assays based on antibodies that recognize the viral proteins that are faster and do not require any special equipment. Here, we explore an innovative analytical approach based on the sandwich oligonucleotide hybridization which can be adapted to several biosensing devices including thermal lateral flow and electrochemical devices, as well as fluorescent microarrays. Polypurine reverse-Hoogsteen hairpins (PPRHs) oligonucleotides that form high-affinity triplexes with the polypyrimidine target sequences are used for the efficient capture of the viral genome. Then, a second labeled oligonucleotide is used to detect the formation of a trimolecular complex in a similar way to antigen tests. The reached limit of detection is around 0.01 nM (a few femtomoles) without the use of any amplification steps. The triplex enhanced nucleic acid detection assay (TENADA) can be readily adapted for the detection of any pathogen requiring only the knowledge of the pathogen genome sequence.

Ensemble inequivalence and negative extensibility in a strongly stretched wormlike chain with fluctuating bending stiffness.

Many semiflexible polymers exhibit fluctuations in the local bending stiffness along their contour. This may be due to intrinsic conformational changes (e.g., denaturation bubble formation in double stranded DNA or helix-coil transition in polypeptides) or the reversible adsorption and desorption of molecules from the polymer's environment (e.g., DNA-protein interactions or hybridization of oligonucleotides). In this article, we analyze the tensile elasticity of a strongly stretched wormlike chain, which consists of N concatenated segments, where each segment can be in one of two states, A or B, which differ in bending stiffness. We call this model the reversible wormlike chain (rWLC) model. In the Gibbs (fixed-force, isotensional) ensemble, we obtain analytic expressions for the force-extension relation and the mean fraction of B segments. We show that, under certain conditions, there is a tension-induced crossover from a mostly A to a mostly B rWLC. In the Helmholtz (fixed-extension, isometric) ensemble, we obtain analytic expressions up to a summation. We show that, for finite N, there is marked ensemble inequivalence. Remarkably, in the Helmholtz ensemble, the rWLC can exhibit negative extensibility and multiple peaks.

Structural Characteristics of the 5'-Terminal Region of Mouse p53 mRNA and Identification of Proteins That Bind to This mRNA Region.

A mouse model has often been used in studies of p53 gene expression. Detailed interpretation of functional studies is, however, hampered by insufficient knowledge of the impact of mouse p53 mRNA’s structure and its interactions with proteins in the translation process. In particular, the 5′-terminal region of mouse p53 mRNA is an important region which takes part in the regulation of the synthesis of p53 protein and its N-truncated isoform Δ41p53. In this work, the spatial folding of the 5′-terminal region of mouse p53 mRNA and its selected sub-fragments was proposed based on the results of the SAXS method and the RNAComposer program. Subsequently, RNA-assisted affinity chromatography was used to identify proteins present in mouse fibroblast cell lysates that are able to bind the RNA oligomer, which corresponds to the 5′-terminal region of mouse p53 mRNA. Possible sites to which the selected, identified proteins can bind were proposed. Interestingly, most of these binding sites coincide with the sites determined as accessible to hybridization of complementary oligonucleotides. Finally, the high binding affinity of hnRNP K and PCBP2 to the 5′-terminal region of mouse p53 mRNA was confirmed and their possible binding sites were proposed.

Redesign of a rapid, low-cost HPV typing assay to support risk-based cervical screening and management.

Accelerated cervical cancer control will require widespread human papillomavirus (HPV) vaccination and screening. For screening, sensitive HPV testing with an option of self‐collection is increasingly desirable. HPV typing predicts risk of precancer/cancer, which could be useful in management, but most current typing assays are expensive and/or complicated. An existing 15‐type isothermal amplification assay (AmpFire, Atila Biosystems, USA) was redesigned as a 13‐type assay (ScreenFire) for public health use. The redesigned assay groups HPV types into four channels with differential cervical cancer risk: (a) HPV16, (b) HPV18/45, (c) HPV31/33/35/52/58 and (d) HPV39/51/56/59/68. Since the assay will be most useful in resource‐limited settings, we chose a stratified random sample of 453 provider‐collected samples from a population‐based screening study in rural Nigeria that had been initially tested with MY09‐MY11‐based PCR with oligonucleotide hybridization genotyping. Frozen residual specimens were masked and retested at Atila Biosystems. Agreement on positivity between ScreenFire and prior PCR testing was very high for each of the channels. When we simulated intended use, that is, a hierarchical result in order of clinical importance of the type groups (HPV16 > 18/45 > 31/33/35/52/58 > 39/51/56/59/68), the weighted kappa for ScreenFire vs PCR was 0.90 (95% CI: 0.86‐0.93). The ScreenFire assay is mobile, relatively simple, rapid (results within 20‐60 minutes) and agrees well with reference testing particularly for the HPV types of greatest carcinogenic risk. If confirmed, ScreenFire or similar isothermal amplification assays could be useful as part of risk‐based screening and management.

An electrochemical aptasensor with N protein binding aptamer-complementary oligonucleotide as probe for ultra-sensitive detection of COVID-19

The emergence of the COVID-19 epidemic has affected the lives of hundreds of millions of people globally. There is no doubt that the development of fast and sensitive detection methods is crucial while the worldwide effective vaccination programs are miles away from actualization. In this study, we have reported an electrochemical N protein aptamer sensor with complementary oligonucleotide as probe for the specific detection of COVID-19. The electrochemical aptasensor was prepared by fixing the double-stranded DNA hybrid obtained by the hybridization of N protein aptamer and its Fc-labeled complementary strand on the surface of a gold electrode. After incubation with the target, the aptamer dissociated from the labeled complementary DNA oligonucleotide hybrid to preferentially bind with N protein in the solution. The concentration of N protein was measured by detecting the changes in electrochemical current signals induced by the conformational transformation of the complementary DNA oligonucleotide left on the electrode surface. The sensor had a linear relationship between the logarithm of the N protein concentration from 10 fM to 100 nM (ΔIp = 0.098 log CN protein/fM - 0.08433, R2 = 0.99), and the detection limitation was 1 fM (S/N = 3). The electrochemical aptamer sensor was applied to test the spiked concentrations of throat swabs and blood samples from three volunteers, and the obtained results proved that the sensor has great potentials for the early detection of COVID-19 in patients.

Probing the conjugation of gold NPs using single-stranded DNA comprising two polyadenine adhesive tails

ABSTRACT The spatial arrangement of nanoobjects by using DNA is a promising nano-design technology. Polyadenine adhesive tails are increasingly used to anchor functional oligonucleotides on the surface of gold nanoparticles at low pH. Further hybridization of such functional oligonucleotides allows nanoparticles to be organized within the desired design. In this work, we studied the effect of temperature, ionic strength, and strand design on the adsorption rate of polyadenines on the surface of gold nanoparticles at different pH. We found that there are temperature and ionic strength ranges in which the adsorption rate increases and vice versa. There are also significant differences in the effects of monovalent sodium and divalent magnesium ions. We have shown that dual-tail DNA strand design allows for increased surface density, which is significantly higher than that obtained with the standard one-tail strand design.

A novel colorimetric aptasensor for sensitive tetracycline detection based on the peroxidase-like activity of Fe3O4@Cu nanoparticles and "sandwich" oligonucleotide hybridization.

Anovel colorimetric aptasensor has been developedfor highly sensitive tetracycline (TC) detection based on the peroxidase-like activity of Fe3O4@Cu nanoparticles and "sandwich" oligonucleotide hybridization. The Fe3O4@Cu nanoparticles with high peroxidase-like activity were successfully synthesized under mild conditions. Then, a "sandwich" oligonucleotide hybridization probe (a short amino-modified complementary sequence of a portion of the TC aptamer (cDNA1), TC aptamers, and a long complementary to 5' terminal TC aptamer sequence (cDNA2)) was created in 96-wells plates via DNA hybridization in the absence of TC from the detection system. The unique "sandwich" oligonucleotide hybridization probe adsorbed large numbers of Fe3O4@Cu nanozymes while further enhancing its peroxidase-like activity. Based on the 3,3',5,5'-tetramethylbenzidine (TMB)-hydrogen peroxide (H2O2) reporting system, the blue color of the solution decreased linearly with the increase ofTC concentration, ranging from 10-3 to 103μg/L with an ultralow limit of detection (LOD) of 0.91ng/L (2pM). Theproposed method was successfully applied to detect TC in spiked milk samples, with recoveries of 81.8 to 112%, demonstrating the excellent potential for highly sensitive TC detection in milk.

A highly sensitive electrochemical biosensor for Hg2+ based on entropy-driven DNA walker-based amplification.

Herein, a sensitive electrochemical biosensor based on an enzyme-free and entropy-driven DNA walker is presented for the determination of Hg2+. This biosensor uses Hg2+ as a key to induce a mismatch between thymine-rich oligonucleotides to start the DNA walker, and it utilizes the entropy change of the sensing system to continuously drive the hybridization of oligonucleotides as a driving force for its walking. As the DNA walker runs, the detection signal is amplified to improve the sensitivity of the biosensor. Square wave voltammetry (SWV) of this biosensor shows a linear response of the methylene blue (MB) oxidation signal with an increase of Hg2+ concentration in the range of 0 to 80 nM with a detection limit of 0.136 nM, which satisfactorily meets the sensitivity requirement of the U.S. Environmental Protection Agency (EPA). The biosensor also exhibits excellent selectivity over a spectrum of interfering ions and performs well in real water samples, suggesting that it is a promising candidate for Hg2+ detection.

Unknown Mutation Detection via Restriction Hybridization Method Instead of Using Next Generation Sequencing Method

In biology mutation is a change in the nucleotide sequences of the DNA of an organism Mainly there are three types of mutation: point mutation, deletion and insertions. Once the mutation has been defined allele specific oligonucleotide hybridization, amplification, heteroduplex formation method referred to as a diagnostic method some advance technique like CRISPR cas9 system is using for selected mutagenesis. Using restriction method system we can detect a mutation. Let’s say you have a DNA sample with fluorescent labeled from patient and you want to make sure that gene you are interested is in healthy gene. We can design different short fragment sequences to scan through DNA or find specific gene or mutation. The sequences scan the DNA if the sequences does not find targeted gene it does not bind to it its means that no fluorescence color appears under UV-light each different short fragment sequences is label with different colors. If the different short fragments sequence does not bind to the DNA or specific gene or area this means that there will be no color appear under UV light this part or gene will be separated from the DNA by using Restriction enzyme to do a Sanger sequencing gel electrophoresis. Result of the Sanger sequencing will provide the information about sequence of unknown part or gene of the DNA this method is easier and cost economic method instead of Next generation sequencing method [1-7].

Zippered G-quadruplex/hemin DNAzyme: exceptional catalyst for universal bioanalytical applications.

G-quadruplex (G4)/hemin DNAzyme is promising horseradish peroxidase (HRP)-mimic candidate in the biological field. However, its relatively unsatisfactory catalytic capacity limits the potential applications. Inspired by nature protease, we conducted a proximity-enhanced cofactor assembly strategy (PECA) to form an exceptional HRP mimic, namely zippered G4/hemin DNAzyme (Z-G4/H). The hybridization of short oligonucleotides induced proximity assembly of the DNA-grafted hemin (DGH) with the complementary G4 sequences (cG4s), mimicking the tight configuration of protease cofactor and apoenzyme. The detailed investigations of catalytic efficiency and mechanism verified the higher activity, more rapid catalytic rate and high environmental tolerance of the Z-G4/H than the classical G4/hemin DNAzymes (C-G4/H). Furthermore, a proximity recognition transducer has been developed based on the PECA for sensitive detection of gene rearrangement and imaging human epidermal growth factor receptor 2 protein (HER2) dimerization on cell surfaces. Our studies demonstrate the high efficiency of Z-G4/H and its universal application potential in clinical diagnostics and biomolecule interaction research. It also may offer significant opportunities and inspiration for the engineering of the protease-free mimic enzyme.

Stoichiometric approach to quantitative analysis of biomolecules: the case of nucleic acids.

Majority of protocols for quantitative analysis of biomarkers (including nucleic acids) require calibrations and target standards. In this work, we developed a principle for quantitative analysis that eliminates the need for a standard of a target molecule. The approach is based on stoichiometric reporting. While stoichiometry is a simple and robust analytical platform, its utility toward the analysis of biomolecules is very limited due to the lack of general methodologies for detecting the equivalence point. In this work, we engineer a new target/probe-binding model that enables detecting the equivalence point while maintaining an appropriate level of specificity. We establish the probe design principles through theoretical simulations and experimental confirmation. Further, we demonstrate the utility of the stoichiometric analysis via a proof-of-concept system based on oligonucleotide hybridization. Overall, the approach that requires neither standard nor calibration yields quantitative results with an adequate accuracy (> 90-110%) and a high specificity. The principles established in our work are very general and can extend beyond oligonucleotide targets toward quantitative analysis of many other biomolecules such as antibodies and proteins.

Unknown Mutation Detection via Restriction Hybridization Method Instead of Using Next Generation Sequencing Method

In biology mutation is a change in the nucleotide sequences of the DNA of an organism mainly there are three types of mutation: point mutation, deletion and insertions. Once the mutation has been defined allele specific oligonucleotide hybridization, amplification, heteroduplex formation method referred to as a diagnostic method some advance technique like CRISPR cas9 system is using for selected mutagenesis. Using restriction method system we can detect a mutation. Let’s say you have a DNA sample with fluorescent labelled from patient and you want to make sure that gene you are interested is in healthy gene. We can design different short fragment sequences to scan through DNA or find specific gene or mutation. The sequences scan the DNA if the sequences does not find targeted gene it does not bind to it its means that no fluorescence color appears under UV-light each different short fragment sequences is label with different colors. If the different short fragments sequence does not bind to the DNA or specific gene or area this means that there will be no color appear under UV light this part or gene will be separated from the DNA by using Restriction enzyme to do a Sanger sequencing gel electrophoresis. Result of the Sanger sequencing will provide the information about sequence of unknown part or gene of the DNA this method is easier and cost economic method instead of Next generation sequencing method.

Determining Sequence-Dependent DNA Oligonucleotide Hybridization and Dehybridization Mechanisms Using Coarse-Grained Molecular Simulation, Markov State Models, and Infrared Spectroscopy.

A robust understanding of the sequence-dependent thermodynamics of DNA hybridization has enabled rapid advances in DNA nanotechnology. A fundamental understanding of the sequence-dependent kinetics and mechanisms of hybridization and dehybridization remains comparatively underdeveloped. In this work, we establish new understanding of the sequence-dependent hybridization/dehybridization kinetics and mechanism within a family of self-complementary pairs of 10-mer DNA oligomers by integrating coarse-grained molecular simulation, machine learning of the slow dynamical modes, data-driven inference of long-time kinetic models, and experimental temperature-jump infrared spectroscopy. For a repetitive ATATATATAT sequence, we resolve a rugged dynamical landscape comprising multiple metastable states, numerous competing hybridization/dehybridization pathways, and a spectrum of dynamical relaxations. Introduction of a G:C pair at the terminus (GATATATATC) or center (ATATGCATAT) of the sequence reduces the ruggedness of the dynamics landscape by eliminating a number of metastable states and reducing the number of competing dynamical pathways. Only by introducing a G:C pair midway between the terminus and the center to maximally disrupt the repetitive nature of the sequence (ATGATATCAT) do we recover a canonical “all-or-nothing” two-state model of hybridization/dehybridization with no intermediate metastable states. Our results establish new understanding of the dynamical richness of sequence-dependent kinetics and mechanisms of DNA hybridization/dehybridization by furnishing quantitative and predictive kinetic models of the dynamical transition network between metastable states, present a molecular basis with which to understand experimental temperature jump data, and furnish foundational design rules by which to rationally engineer the kinetics and pathways of DNA association and dissociation for DNA nanotechnology applications.

Early sample tagging and pooling enables simultaneous SARS-CoV-2 detection and variant sequencing.

Most severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) diagnostic tests have relied on RNA extraction followed by reverse transcription quantitative polymerase chain reaction (RT-qPCR) assays. Whereas automation improved logistics and different pooling strategies increased testing capacity, highly multiplexed next-generation sequencing (NGS) diagnostics remain a largely untapped resource. NGS tests have the potential to markedly increase throughput while providing crucial SARS-CoV-2 variant information. Current NGS-based detection and genotyping assays for SARS-CoV-2 are costly, mostly due to parallel sample processing through multiple steps. Here, we have established ApharSeq, in which samples are barcoded in the lysis buffer and pooled before reverse transcription. We validated this assay by applying ApharSeq to more than 500 clinical samples from the Clinical Virology Laboratory at Hadassah hospital in a robotic workflow. The assay was linear across five orders of magnitude, and the limit of detection was Ct 33 (~1000 copies/ml, 95% sensitivity) with >99.5% specificity. ApharSeq provided targeted high-confidence genotype information due to unique molecular identifiers incorporated into this method. Because of early pooling, we were able to estimate a 10- to 100-fold reduction in labor, automated liquid handling, and reagent requirements in high-throughput settings compared to current testing methods. The protocol can be tailored to assay other host or pathogen RNA targets simultaneously. These results suggest that ApharSeq can be a promising tool for current and future mass diagnostic challenges.

A five-year retrospective study on the epidemiology of hand, foot and mouth disease in Sabah, Malaysia

Hand, foot, and mouth disease (HFMD) is endemic in Malaysia, with the number of cases increasing. Sabah has experienced several HFMD outbreaks, but information on the epidemiology and molecular characteristics of responsible viruses is scarce. In this study, data of 17,574 reports of HFMD cases in Sabah from 2015 to 2019 were extracted from a public health disease surveillance system and analyzed. Twenty-one swab samples from 13 children were collected from Beaufort, Sabah, during an outbreak in August 2018 for detection and serotyping of causative viruses by semi-nested reverse transcription-polymerase chain reaction (snRT-PCR) of the VP4–VP2 region and consensus degenerate hybrid oligonucleotide primer PCR of the VP1 region, respectively. Nucleotide sequencing and phylogenetic analysis were conducted by the neighbor-joining method. The average annual incidence of HFMD was 94.3 per 100,000 people, with the greatest yearly increase between 2017 and 2018. Swabs from six children were tested positive for enterovirus, of which five were positive for CVA16 and one for EV71. All CVA16 strains belonged to sub-genotype B1a, and the EV71 strain belonged to sub-genotype B5. Phylogenetic analyses indicate that enterovirus genotype shift might be responsible for the increasing trend of HFMD in Sabah, however, further study is needed.

Supramolecular "Click Chemistry" for Targeting in the Body.

The fields of precision imaging and drug delivery have revealed a number of tools to improve target specificity and increase efficacy in diagnosing and treating disease. Biological molecules, such as antibodies, continue to be the primary means of assuring active targeting of various payloads. However, molecular-scale recognition motifs have emerged in recent decades to achieve specificity through the design of interacting chemical motifs. In this regard, an assortment of bioorthogonal covalent conjugations offer possibilities for in situ complexation under physiological conditions. Herein, a related concept is discussed that leverages interactions from noncovalent or supramolecular motifs to facilitate in situ recognition and complex formation in the body. Classic supramolecular motifs based on host-guest complexation offer one such means of facilitating recognition. In addition, synthetic bioinspired motifs based on oligonucleotide hybridization and coiled-coil peptide bundles afford other routes to form complexes in situ. The architectures to include recognition of these various motifs for targeting enable both monovalent and multivalent presentation, seeking high affinity or engineered avidity to facilitate conjugation even under dilute conditions of the body. Accordingly, supramolecular "click chemistry" offers a complementary tool in the growing arsenal targeting improved healthcare efficacy.

Impact of a Single Nucleotide Change or Non-Nucleoside Modifications in G-Rich Region on the Quadruplex-Duplex Hybrid Formation.

In this paper, a method to discriminate between two target RNA sequences that differ by one nucleotide only is presented. The method relies on the formation of alternative structures, i.e., quadruplex–duplex hybrid (QDH) and duplex with dangling ends (Dss), after hybridization of DNA or RNA G-rich oligonucleotides with target sequences containing 5′–GGGCUGG–3′ or 5′–GGGCGGG–3′ fragments. Using biophysical methods, we studied the effect of oligonucleotide types (DNA, RNA), non-nucleotide modifications (aliphatic linkers or abasic), and covalently attached G4 ligand on the ability of G-rich oligonucleotides to assemble a G-quadruplex motif. We demonstrated that all examined non-nucleotide modifications could mimic the external loops in the G-quadruplex domain of QDH structures without affecting their stability. Additionally, some modifications, in particular the presence of two abasic residues in the G-rich oligonucleotide, can induce the formation of non-canonical QDH instead of the Dss structure upon hybridization to a target sequence containing the GGGCUGG motif. Our results offer new insight into the sequential requirements for the formation of G-quadruplexes and provide important data on the effects of non-nucleotide modifications on G-quadruplex formation.

Development of molecular driven screening for desulfurizing microorganisms targeting the dszB desulfinase gene

COnsensus DEgenerate Hybrid Oligonucleotide Primers (CODEHOP) were developed for the detection of the dszB desulfinase gene (2′-hydroxybiphenyl-2-sulfinate desulfinase; EC 3.13.1.3) by polymerase chain reaction (PCR), which allow to reveal larger diversity than traditional primers. The new developed primers were used as molecular monitoring tool to drive a procedure for the isolation of desulfurizing microorganisms. The primers revealed a large dszB gene diversity in environmental samples, particularly in diesel-contaminated soil that served as inoculum for enrichment cultures. The isolation procedure using the dibenzothiophene sulfone (DBTO2) as sole sulfur source reduced drastically the dszB gene diversity. A dszB gene closely related to that carried by Gordonia species was selected. The desulfurization activity was confirmed by the production of desulfurized 2-hydroxybiphenyl (2-HBP). Metagenomic 16S rRNA gene sequencing showed that the Gordonia genus was represented at low abundance in the initial bacterial community. Such observation highlighted that the culture medium and conditions represent the bottleneck for isolating novel desulfurizing microorganisms. The new developed primers constitute useful tool for the development of appropriate cultural-dependent procedures, including medium and culture conditions, to access novel desulfurizing microorganisms useful for the petroleum industry.

Determining sequence-dependent DNA oligonucleotide hybridization and dehybridization mechanisms using coarse-grained molecular simulation, Markov state models, and infrared spectroscopy

Determining sequence-dependent DNA oligonucleotide hybridization and dehybridization mechanisms using coarse-grained molecular simulation, Markov state models, and infrared spectroscopy