Hybridization Chain Reaction Products Research Articles

Ultrasensitive Electrochemical Biosensor with Powerful Triple Cascade Signal Amplification for Detection of MicroRNA.

In this work, by ingeniously integrating catalytic hairpin assembly (CHA), double-end Mg2+-dependent DNAzyme, and hybridization chain reaction (HCR) as a triple cascade signal amplifier, an efficient concatenated CHA-DNAzyme-HCR (CDH) system was constructed to develop an ultrasensitive electrochemical biosensor with a low-background signal for the detection of microRNA-221 (miRNA-221). In the presence of the target miRNA-221, the CHA cycle was initiated by reacting with hairpins H1 and H2 to form DNAzyme structure H1-H2, which catalyzed the cleavage of the substrate hairpin H0 to release two output DNAs (output 1 and output 2). Subsequently, the double-loop hairpin H fixed on the electrode plate was opened by the output DNAs, to trigger the HCR with the assistance of hairpins Ha and Hb. Finally, methylene blue was intercalated into the long dsDNA polymer of the HCR product, resulting in a significant electrochemical signal. Surprisingly, the double-loop structure of the hairpin H could prominently reduce the background signal for enhancing the signal-to-noise ratio (S/N). As a proof of concept, an ultrasensitive electrochemical biosensor was developed using the CDH system with a detection limit as low as 9.25 aM, achieving favorable application for the detection of miRNA-221 in various cancer cell lysates. Benefiting from its enzyme-free, label-free, low-background, and highly sensitive characteristics, the CDH system showed widespread application potential for analyzing trace amounts of biomarkers in various clinical research studies.

Label-free, background-free detection of nucleic acid with immobilization-free heterogeneous biosensor and one-pot hybridization chain reaction amplification

Although immobilization-free and label-free electrochemical DNA (E-DNA) biosensors have engaged tremendous interest due to their superior properties, such as easy operation, time-saving and cost-saving, most of them are fabricated in homogeneous modes and usually produce high background current. In the present work, we proposed a new immobilization-free and label-free heterogeneous E-DNA assay based on a dual-blocker-aided multibranched hybridization chain reaction (HCR) for one-pot nucleic acid detection with zero background. The target nucleic acid triggers the HCR involving cascaded hybridization between two metastable hairpins, resulting in the generation of HCR products with multibranched arms, which can be captured onto the electrode via π-π stacking interactions between multibranched arms and reduced graphene oxide (rGO). Prior to the incubation process with an electrode, two blockers are designed to prohibit the nonspecific absorption of unreacted hairpin probes. Thus, an immobilization-free and label-free heterogeneous electrochemical assay for one-pot nucleic acid detection with zero background is readily realized. This strategy also presents additional merits of simplicity and cheap cost, since probe immobilization, signal tag labeling, and multiple incubation processes are avoided. Therefore, the as-proposed effective and versatile biosensor has great potential to be applied in nucleic acid-related practical biosensing.

Sensitive aptasensing of ATP based on a PAM site-regulated CRISPR/Cas12a activation.

The combination of CRISPR/Cas12a and functional DNA provides the possibility of constructing biosensors for detecting non-nucleic-acid targets. In the current study, the duplex protospacer adjacent motif (PAM) in the activator of CRISPR/Cas12a was used as a molecular switch, and a sensitive adenosine triphosphate (ATP) detection biosensor was constructed using an allosteric probe-conjugated PAM site formation in hybridization chain reaction (HCR) integrated with the CRISPR/Cas12a system (APF-CRISPR). In the absence of ATP, an aptamer-containing probe (AP) is in a stem-loop structure, which blocks the initiation of HCR. In the presence of ATP, the structure of AP is changed upon ATP binding, resulting in the release of the HCR trigger strand and the production of long duplex DNA with many PAM sites. Since the presence of a duplex PAM site is crucial for triggering the cleavage activity of CRISPR/Cas12a, the ATP-dependent formation of the PAM site in HCR products can initiate the FQ-reporter cleavage, allowing ATP quantification by measuring the fluorescent signals. By optimizing the sequence elements and detection conditions, the aptasensor demonstrated superior detection performance. The limit of detection (LOD) of the assay was estimated to be 1.16 nM, where the standard deviation of the blank was calculated based on six repeated measurements. The dynamic range of the detection was 25-750 nM, and the whole workflow of the assay was approximately 60min. In addition, the reliability and practicability of the aptasensor were validated by comparing it with a commercially available chemiluminescence kit for ATP detection in serum. Due to its high sensitivity, specificity, and reliable performance, the APF-CRISPR holds great potential in bioanalytical studies for ATP detection. In addition, we have provided a proof-of-principle for constructing a CRISPR/Cas12a-based aptasensor, in which the PAM is utilized to regulate Cas12a cleavage activity.

Ratiometric detection of lithium ions in serum and living cells using DNAzyme-assisted hybridization chain reaction

Lithium, a first-line mood stabilizer for bipolar disorder (BD), presents challenges due to its narrow therapeutic window (0.6–1.2 mM) and potential side effects in overdose. Hence, it is crucial to accurately and sensitively detect lithium ions (Li+) in serum and living cells for timely monitoring of BD progression and gaining mechanistic insight into lithium-based therapy. In this study, we design a Li+-responsive DNAzyme-HCR amplifier by combining hybridization chain reaction (HCR) and the Li+-specific DNAzyme. The presence of Li+ catalytically cleaves the DNAzyme, releasing the embedded HCR DNA trigger and generating numerous DNAzyme-assisted HCR products, ultimately activating the fluorescence resonance energy transfer response. Our results demonstrate that the DNAzyme-HCR amplifier enables amplified Li+ detection in serum, which are consistent with the results obtained using the inductively coupled plasma optical emission spectroscopy (ICP-OES) method. Furthermore, the DNAzyme-HCR amplifier allows for Li+ imaging in living cells, showing promising potential in monitoring treatment effects against BD.

Exonuclease-III Assisted the Target Recycling Coupling with Hybridization Chain Reaction for Sensitive mecAGene Analysis by Using PGM.

In the field of neonatal infections nursing, methicillin-resistant Staphylococcus aureus (MRSA) is a major bacterial pathogen. Here, we present a portable biosensor for MRSA detection that is both highly sensitive and portable, owing to its implementation on the personal glucose meter (PGM) platform. The H probe was fixed on the magnetic bead for mecA gene analysis. A blunt 3' terminus appeared in the MBs-H probe when the mecA gene was present. Exonuclease-III (Exo-III) recognized the blunt terminus and cleaved it, freeing the mecA gene and so facilitating target recycling. In the meantime, the remaining H probe-initiated hybridization chain reaction (HCR) led to the desired signal amplification. Portable quantitative detection of mecA gene is possible because PGM can read the quantity of invertase tagged on HCR product. After optimizing several experimental parameters, such as the concentration of Exo-III and incubation time, the constructed sensor is extremely sensitive, with a detection limit of 2 CFU/mL. The results from this sensitive PGM-based sensor are in agreement with those obtained from plate counting methods, suggesting that it can be used to accurately assess the MRSA content in artificial clinical samples. In addition, the PGM sensor can significantly cut down on time spent compared to plate counting techniques. The manufactured sensor provides a promising option for accurate identification of pathogenic bacteria.

A binding-triggered hybridization chain reaction cascade multi-site activated CRISPR/Cas12a signal amplification strategy for sensitive detection of α-synuclein.

Alpha-synuclein (α-syn) is closely related to the pathological process of Parkinson's disease (PD). Sensitive detection of α-syn is important for the early diagnosis and disease progression monitoring of PD. Herein, we report a binding-triggered hybridization chain reaction (HCR) cascade multi-site activated CRISPR/Cas12a signal amplification strategy for sensitive detection of α-syn. In this method, antibody-DNA capture probes recognized α-syn and bound with it to increase the local effective concentrations of two DNA strands, promoting their hybridization to form a split HCR trigger. Then the trigger initiated an HCR to generate a long double-stranded structure which contained abundant periodically repeated Cas12a/crRNA target sequences. Finally, the Cas12a/crRNA recognized the target sequence in HCR products and then the cleavage activity toward fluorescent reporters was activated, leading to the recovery of appreciable fluorescence signals. Our method provided a detection limit as low as 9.33 pM and exhibited satisfactory applicability in human serum samples. In summary, this study provides a homogeneous strategy for convenient, sensitive, and accurate detection of α-syn, showing great potential in the early diagnosis of PD.

Enhanced detection of acetamiprid via a gold nanoparticle-based colorimetric aptasensor integrated with a hybridization chain reaction.

This study presents a novel colorimetric aptasensor, which seamlessly integrates gold nanoparticles (AuNPs) with the amplification potential of the hybridization chain reaction (HCR) for enhanced detection of acetamiprid. The aptamer, hybridized with a partially complementary strand that is covalently linked to AuNPs, serves as the recognition element for acetamiprid. The free end sequence of the aptamer, distal from the AuNP surface, functions as the initiating strand for the HCR, triggering the amplification process. In the absence of acetamiprid, the HCR efficiently occurs, conferring robust salt tolerance to the AuNPs and maintaining their characteristic red coloration. However, in the presence of acetamiprid, the aptamer preferentially binds to its target, disrupting the double-stranded structure and leading to the dissociation of the aptamer from the AuNPs. This dissociation results in a decrease in the HCR product, subsequently diminishing the salt tolerance of AuNPs and triggering a colorimetric transition from red to gray. This integration enhances sensitivity to 3.14 nM. Additionally, carbon quantum dots (CQDs) transduce colorimetric signals to fluorescent ones, further boosting the sensitivity to 0.24 nM. The aptasensor exhibits excellent selectivity and robustness. Real-world testing on tomato, peach, and lettuce shows recoveries of 98.50% to 100.36% with low standard deviations, validating its utility for pesticide residue analysis and food safety. This study provides a powerful tool for rapid and accurate pesticide detection, crucial for food safety.

Genetically engineered virus-like particle-armoured and multibranched DNA scaffold-corbelled ultra-sensitive hierarchical hybridization chain reaction for targeting-enhanced imaging in living biosystems under spatiotemporal light powering

Although nucleic acids-based fluorescent biosensors, exemplified by the hybridization chain reaction (HCR), have exhibited promise as an imaging tool for detecting disease-related biomolecular makers in living biosystems, they still face certain challenges. These include the need for improved sensitivity, poor bio-targeting capability, the absence of signal enrichment interface and the uncontrollable biosensing initiation. Herein, we present a range of effective solutions. First, a stacking design resembling building blocks is used to construct a special hierarchical HCR (termed H-HCR), for which a hierarchical bridge is employed to graft multiunit HCR products. Furthermore, the H-HCR components are encapsulated into a virus-like particle (VLP) endowed with a naturally peptide-mediated targeting unit through genetic engineering of plasmids, after which the biosensor can specifically identify cancer cytomembranes. By further creating a multibranched DNA scaffold to enrich the H-HCR produced detection signals, the biosensor's analyte recognition module is inserted with a photocleavage-linker, allowing that the biosensing process can be spatiotemporally initiated via a light-powered behavior. Following these innovations, this genetically engineered VLP-armoured and multibranched DNA-scaffold-corbelled H-HCR demonstrates an ultra-sensitive and specific biosensing performance to a cancer-associated microRNA marker (miRNA-155). Beyond the worthy in vitro analysis, our method is also effective in performing imaging assays for such low-abundance analyte in living cells and even bodies, thus providing a roust platform for disease diagnosis.

A triple-signal strategy separated aptasensor for sensitive determination of aflatoxin B1 in peanut based on electrochemical and fluorescent dual-mode

It is necessary to develop accurate and sensitive AFB1 detection method due to its high toxicity of pathogenicity and carcinogenicity. The results of traditional single-mode AFB1 detection methods are easily affected by the test environment and human operation. Herein, an electrochemical and fluorescent dual-mode separated aptasensor was developed for detecting AFB1 with triple-signal readout. The AFB1 aptasensor was constructed by combining the Fc-labeled AFB1 aptamer with its complementary DNA (cDNA). Subsequently, the methylene blue (MB) was incorporated into dsDNA as another signal tag. In the presence of AFB1, the Fc tag approached to electrode surface, both of the cDNA and MB molecule released due to the interaction between AFB1 and its aptamer, resulting in “signal-on” and “signal-off” dual-signal strategy. There was a good linear relationship between the SWV electrochemical response signal and the logarithm of AFB1 concentration at 0.01–200 ng/mL (LOD 2.5 pg/mL, S/N = 3). Meanwhile, the released cDNA was designed to trigger hybridization chain reaction (HCR), and the HCR product was served as template for the formation of fluorescent copper nanoparticles (CuNPs). There was a good linear relationship between the fluorescent intensity of CuNPs and the logarithm of AFB1 concentration at 0.001–200 ng/mL (LOD 0.28 pg/mL, S/N = 3). The separated fluorescent method showed broadened linear range and lower LOD compared with SWV method, both up to 10-folds, which improved the detection sensitivity. The constructed dual-mode AFB1 aptasensor showed satisfactory selectivity, stability and reproducibility, and the good recoveries of real peanut samples indicated its practical application in food detection.

Highly sensitive detection of Salmonella based on dual-functional HCR-mediated multivalent aptamer and amplification-free CRISPR/Cas12a system

BackgroundSalmonella infection severely threatens human health and causes substantial medical and financial concerns. Sensitive and specific detection of Salmonella in food samples is crucial but remains challenging. While some traditional assays for S. typhimurium are reliable, they suffer from various limitations, such as being time-consuming (culture-based methods), involving intricate nucleic molecular extraction (polymerization chain reaction, PCR), and exhibiting inadequate sensitivity (enzyme-linked immunosorbent assay, ELISA). In this case, it is essential to establish a rapid, simple-operation, and sensitive method for monitoring S. typhimurium to preserve food quality and prevent contamination. ResultHerein, an amplification-free detection method for Salmonella was developed by coupling the aptamer magnetic separation with dual-functional HCR (hybridization chain reaction)-scaffold multivalent aptamer and the activity of CRISPR/Cas12a. In the detection system, the dual-functional HCR-scaffold multivalent aptamer with high binding affinity and specificity was fabricated in advance by assembling numerous Salmonella specific aptamers on the long HCR products. In addition to the enhanced affinity, the HCR-multiApt also contains a massive amount of repeated CRISPR-targetable DNA units in its HCR scaffold, which could trigger the trans-cleavage activity of Cas12a. In the presence of target bacteria, the HCR-scaffold multivalent aptamer could attach on the surface of bacteria effectively and amplified the signal of bacteria into CRISPR/Cas12a based fluorescent readout. The proposed detection system allowed for ultrasensitive detection of Salmonella in a linear range from 100 to 107 cfu mL−1 with a LOD (limit of detection) of 2 cfu mL−1. SignificanceThe novel dual-functional HCR-multiApt presents a simple and powerful strategy for improving the aptamer binding affinity toward Salmonella. Simultaneously, integrating this dual-functional HCR-multiApt with the CRISPR/Cas12a system significantly enhances the sensitivity by cascade signal amplification in a nucleic acids amplification-free way. Finally, leveraging the versatility of the aptamer, this highly sensitive method can be further extended for application in the detection of other bacteria, food safety monitoring, or clinical diagnostics.

An ultrasensitive Cd2+ detection biosensor based on DNAzyme and CRISPR/Cas12a coupled with hybridization chain reaction

The detection of cadmium is essential because it poses a significant threat to human health and the environment. Recent advancements in biosensors that detect nonnucleic-acid targets using CRISPR/Cas12a in combination with aptamers or DNAzymes show promising performance. Herein, we integrated DNAzyme, hybridization chain reaction (HCR) and CRISPR/Cas12a into a single biosensor for the first time and realized the ultrasensitive detection of Cd2+. A single phosphorothioate ribonucleobase (rA)-containing oligonucleotide (PS substrate) and a Cd2+-specific DNAzyme (Cdzyme) are used for Cd2+ recognition, releasing short single-stranded DNA. Then, the HCR is triggered by the cleavage products for signal transduction and amplification. Next, the trans-cleavage activity of Cas12a is activated due to the presence of crRNA complementary strands and PAM sites in the HCR products. As a result, FQ-reporters are cleaved, and the fluorescence values can be easily read using a fluorometer, allowing Cd2+ quantification by measuring the fluorescent signal. The Cd2+ detection biosensor is ultrasensitive with a detection limit of 1.25 pM. Moreover, the biosensor shows great stability under different pH and various anion conditions. The proposed sensor was utilized for environmental water sample detection, demonstrating the dependability of the detection system. Considering the high sensitivity and reliable performance of the assay, it could be further used in environmental monitoring. In addition, the design strategy reported in this study could extend the application of CRISPR/Cas12a in heavy metal detection.

Hybridization Chain Reaction-Based Electrochemical Biosensors by Integrating the Advantages of Homogeneous Reaction and Heterogeneous Detection.

The conventional hybridization chain reaction (HCR)-based electrochemical biosensors usually require the immobilization of probes on the electrode surface. This will limit the applications of biosensors due to the shortcomings of complex immobilization processes and low HCR efficiency. In this work, we proposed astrategy for the design of HCR-based electrochemical biosensors by integrating the advantages of homogeneous reaction and heterogeneous detection. Specifically, the targets triggered the autonomous cross-opening and hybridization oftwobiotin-labeled hairpin probes to form long-nicked dsDNA polymers. The HCR products with many biotin tags were then captured by a streptavidin-covered electrode, thus allowing for the attachment of streptavidin-conjugated signal reporters through streptavidin-biotin interactions. By employing DNA and microRNA-21 as the model targets and glucose oxidase as the signal reporter, the analytical performances of the HCR-based electrochemical biosensors were investigated. The detection limits of this method were found to be 0.6 fM and 1 fM for DNA and microRNA-21, respectively. The proposed strategy exhibited good reliability for target analysis in serum and cellular lysates. The strategy can be used to develop various HCR-based biosensors for a wide range of applications because sequence-specific oligonucleotides exhibit high binding affinity to a series of targets. In light of the high stability and commercial availability of streptavidin-modified materials, the strategy can be used for the design of different biosensors by changing the signal reporter and/or the sequence of hairpin probes.

Ultrasensitive Hybridization Chain Reaction-Assisted Multisite Exonuclease III Amplification Strategy Combined with a Direct Quantitative Fluorescence Lateral Flow Technique for Multiple Bacterial 16S rRNA Detection.

Accurate and in-time detection of bacteria conduces to preventing their rapid spread around the environment, while a nucleic acid test (NAT) is a powerful tool for early diagnosis of pathogens. Herein, we propose a hybridization chain reaction (HCR)-mediated multisite exonuclease III (Exo-III) amplification strategy (HCR/Exo-III amplifier) to achieve the one-pot and ultrasensitive isothermal amplification of bacterial 16S rRNA and a portable fluorescence detection device (PFD) to directly read signals in a lateral flow assay (LFA). In detail, the target-initiated HCR products present multiple binding sites for triggering the Exo-III amplifier that produces numerous target amplicons. Following that, the target amplicons travel up on the strip and bridge between the DNA-CdTe/CdS probes and the capture DNA to form a positive fluorescence line. After that, the strip is inserted into the PFD to accomplish the fluorescence signal reading. The constructed HCR/Exo-III amplifier-based PFD-LFA implemented the simultaneous and specific detection of three bacteria with a detection limit of a few tenths of fM for synthetic 16S rRNA fragments and dozens of CFU/mL for Staphylococcus aureus, Listeria monocytogenes, and Salmonella typhimurium in pure cultures. The sensing platform features isothermal amplification, convenient operation, and good economy, displaying great potential for on-site testing toward multiple nucleic acid analytes.

DNAzyme-driven tripedal DNA walker triggered hybridization chain reaction for label-free electrochemical detection of Alzheimer’s tau protein

The tau protein is considered to be a reliable molecular biomarker of Alzheimer's disease (AD). Developing sensitive and reliable techniques for tau protein detection is a vital task. In this work, we designed a label-free electrochemical aptasensor for tau protein quantification based on Mg2+-DNAzyme (MNAzyme)-driven tripedal DNA walker. With the assistance of MNAzyme, free-running tripedal DNA walkers could rapidly and continually scissor DNA molecular beacon (MBs), and the fragment as a primer initiated the hybridization chain reaction (HCR) process generating a huge amount of long DNA strand containing many adenines. Following that, the strand with long-repeated adenines (HCR product) may absorb numerous AgNPs on the surface of electrode for electrochemical stripping analysis. Benefiting from MNAzyme-tripedal DNA walker and HCR triple signal amplification, we achieved a superior detection limit of 0.43 fM as well as a broad linear range of 1 fM to 0.1 nM. After being applied to tau protein detection in human serum samples, this novel electrochemical aptasensor demonstrated a high degree of anti-interference, and reproducibility, indicating its great potential for bioanalysis in complex biological environments.

A fluorescence aptasensor based on hybridization chain reaction for simultaneous detection of T-2 toxins and zearalenone1

It is extremely necessary to establish a rapid and high-throughput method to detect mycotoxins in food, because grains and cereals are greatly vulnerable to mycotoxins before and after harvest. In this study, we developed a portable aptasensor based on streptavidin magnetic microspheres (MMPs) and hybridization chain reaction (HCR) to simultaneously detect T-2 toxin and zearalenone (ZEN) in corn and oat flour. The MMPs compete with the aptamer for binding, which releases more H0 and triggers HCR with the H1 intermediate modified using 6-FAM and BHQ-1 and the unmodified H2. Subsequently, placing the HCR system corresponding to T-2 and ZEN in a constant-temperature fluorescence detector resulted in well-recovered fluorescence of the HCR products. T-2 and ZEN exhibited good fluorescence response in the dynamic range of 0.001–10 ng mL−1 and 0.01–100 ng mL−1 with detection limits of 0.1 pg mL−1 and 1.2 pg mL−1, respectively. In addition, this strategy achieved the selective detection of T-2 and ZEN in the spiked corn and oat flour samples. The results are also in good agreement with those obtained using commercial ELISA kits. This developed aptasensor with the characteristics of simple operation and portability has the application potential of establishing sensitive and portable field detection of various mycotoxins.

Tetrahedral DNA nanostructure-corbelled click chemistry-based large-scale assembly of nanozymes for ratiometric fluorescence assay of DNA methyltransferase activity.

Ligation efficiency in a surface-based DNA click chemistry (CuAAC) reaction is extremely restricted by the orientation and density of probes arranged on a heterogeneous surface. Herein, we engineer DNA tetrahedral nanostructure (DTN)-corbelled click chemistry to trigger a hybridization chain reaction (HCR) assembling a large-scale of nanozymes for ratiometric fluorescence detection of DNA adenine methyltransferase (Dam). In this study, a DNA tetrahedron structure with an alkynyl modifying pendant DNA probe (Alk-DTN) is designed and assembled on a magnetic bead (MB) as a scaffold for click chemistry. When a CuO NP-encoded magnetic nanoparticle (CuO-MNP) substrate was methylated by Dam, CuO NPs were released and turned into a mass of Cu+. The Cu+ droves azido modifying lDNA (azide-lDNA) to connect with the Alk-DTN probe on the MB through the click reaction, forming an intact primer to initiate the HCR. The HCR product, a rigid structure double-stranded DNA, periodically assembles glucose oxidase mimicking gold nanoparticles (GNPs) into a large-scale of nanozymes for catalyzing the oxidation of glucose to H2O2. NH2-MIL-101 MOFs, a fluorescent indicator and a biomimetic catalyst, activated the product H2O2 to oxidize o-phenylenediamine (oPD) into visually detectable 2,3-diaminophenazine (DAP). The change of the signal ratio between DAP and NH2-MIL-101 is proportional to the methylation event corresponding to the MTase activity. In this study, the DTN enhances the efficiency of the surface-based DNA click reaction and maintains the catalytic activities of gold nanoparticle nanozymes due to the intrinsic nature of mechanical rigidity and well-controlled orientation and well-adjusted size. Large-scale assembly of nanozymes circumvents the loss of natural enzyme activity caused by chemical modification and greatly improves the amplification efficiency. The proposed biosensor displayed a low detection limit of 0.001 U mL-1 for Dam MTase due to multiple amplification and was effective in real samples and methylation inhibitor screening, providing a promising modular platform for bioanalysis.

Sensitive and convenient detection of miRNA-145 using a gold nanoparticle-HCR coupled system: computational and in vitro validations.

Multiple sclerosis (MS) remains a challenging disease that requires timely diagnosis. Therefore, an ultrasensitive optical biosensor based on hybridization chain reaction (HCR) was developed to detect microRNA-145 (miRNA-145) as an MS biomarker. To construct such a sensor, HCR occurred between specific hairpin probes, as MB1 contains a poly-cytosine nucleotide loop and MB2 has a poly-guanine nucleotide sticky end. By introducing miR-145 as a target sequence, long-range dsDNA polymers are formed. Then, positively charged gold nanoparticles (AuNPs) were incubated with the HCR product, which adsorbed onto the dsDNA polymers due to electrostatic adsorption. This resulted in the precipitation of the AuNPs. By incubating different concentrations of miR-145 with AuNPs, the changes in the UV-vis spectrum of the supernatant were analyzed. The proposed biosensor showed a great ability to detect miR-145 in a wide linear range from 1 pM-1 nM with an excellent detection limit (LOD) of 0.519 nM. Furthermore, the developed biosensor indicated considerable selectivity in discriminating between miR-145 and mismatched sequences. It shows high selectivity in differentiating targets. Interestingly, the proposed method was also able to detect miRNA-145 in the diluted serum samples. In conclusion, this sensing platform exhibits high selectivity and specificity for the detection of circulating microRNAs, which holds great promise for translation to routine clinical applications.

A dual-mode strategy based on β-galactosidase and target-induced DNA polymerase protection for transcription factor detection using colorimetry and a glucose meter.

In this work, we report a novel dual-mode method for the highly specific and sensitive detection of transcription factors (TFs) via the integration of Klenow polymerase protection induced by target-specific recognition, cascade-signal amplification using the hybridization chain reaction (HCR) and CRISPR/Cas12a system, and dual-signal transduction mediated by β-galactosidase (β-gal) and two substrates. A dual-mode signal-sensing interface was constructed by immobilizing the oligo DNA probe (P1) tethered β-gal in a 96-well plate. A hairpin H1 with the ability to initiate HCRs was designed to contain the TF binding site. The binding between the TF and H1 protected the H1 from being extended by the Klenow fragment. After thermal denaturation, the reserved H1 launched the HCR and the HCR products activated CRISPR/Cas12a to cleave P1 and reduce the β-gal on the sensing interface, and thus the contents of the TFs and the corresponding signals mediated by the catalysis of β-gal showed a correlation. This work was the first attempt at utilizing β-gal for dual-signal transduction. It is a pioneering study to utilize the HCR-CRISPR/Cas12a system for dual-mode TF sensors. It revealed that DNA polymerase protection through the binding of TF and DNA could be applied as a new pattern to develop TF sensors.

The integration of hybridization chain reaction (HCR) with fluorogenic silver nanoclusters (AgNCs) in an aggregation induced emission (AIE)-based nanosensor for sex determination and its forensic application

We have designed a novel turn-on label-free nanosensor for sex determination by targeting DYS14 marker found on Y chromosome via integrating hybridization chain reaction (HCR) and silver nanoclusters (AgNCs). AgNCs are used as fluorophores, and for the first time, they are formed separately on a DNA template sequence other than the hairpins of HCR, to fulfill their sensitive synthesis and drive their aggregation induced emission (AIE) enhancement. While HCR acts as a simple, enzyme-free and isothermal amplification technique. The working principle is based on the hybridization of the target, when present, with a part of the hairpin H1 causing its opening, and then the other fragments open another hairpin H2 to hybridize with. As a last step, the free fragment found on H2 hybridizes with that attached to the nucleation sequence of AgNCs on the free DNA probes. As a result, a double stranded HCR product is formed, and the nanoclusters are placed in specific positions in a close proximity on it. This accumulation causes the phenomenon of AIE, and finally, the fluorescence emission intensity of AgNCs increases. This designed bioassay has the advantages of simple operation, cost effectiveness, rapid results, and good stability and specificity. Furthermore, it is the first time; an optical biosensor is introduced for this gene. Moreover, the detection limit of this assay is as low as 0.87 pM, and it also showed satisfying performance in real samples. This platform holds great promise for the application of label-free HCR/AgNCs nanosensors to other biomarkers.

A HCR based multivalent aptamer amplifier for ultrasensitive detection of Salmonella

Aptamer holds great promise as an alternative recognition element for foodborne pathogens detection because of its superior structural features. However, its application is still limited by the diminished affinity in food samples and the sophisticated signal amplifications. Herein, we fabricate a hybridization chain reaction (HCR) based multivalent aptamer (multi-Apt) as an effective signal amplifier for the sensitive detection of Salmonella. The aptamer was assembled on the HCR product to construct a DNA programmable multi-Apt, which displayed a 33-fold enhancement binding affinity and a much faster reaction kinetics than that of a monovalent aptamer (mono-Apt). Furthermore, the HCR scaffold was exploited as the signal carrier via the abundant DNA hairpins. Due to the synergism of the high affinity of multi-Apt and the scaffold-based signal amplification, the proposed HCR based multi-Apt amplifier could detect Salmonella as low as 7 cfu mL−1 with a broad detection range of 10 to 107 cfu mL−1. Besides, it also exhibited excellent specificity against target bacteria and performed well on the detection of spiked food samples, indicating the promise in practical detection of Salmonella.