Influence Of Humidity Research Articles

Toward Humidity-Independent Sensitive and Fast Response Temperature Sensors Based on Reduced Graphene Oxide/Poly(vinyl alcohol) Nanocomposites.

Flexible temperature sensors are becoming increasingly important these days. In this work, we explore graphene oxide (GO)/poly(vinyl alcohol) (PVA) nanocomposites for potential application in temperature sensors. The influence of the mixing ratio of both materials, the reduction temperature, and passivation on the sensing performance has been investigated. Various spectroscopic techniques revealed the composite structure and atomic composition. These were complemented by semiempirical quantum chemical calculations to investigate rGO and PVA interaction. Scanning electron and atomic force microscopy measurements were carried out to evaluate dispersion and coated film quality. The temperature sensitivity has been evaluated for several composite materials with different compositions in the range from 10 to 80 °C. The results show that a linear temperature behavior can be realized based on rGO/PVA composites with temperature coefficients of resistance (TCR) larger than 1.8% K-1 and a fast response time of 0.3 s with minimal hysteresis. Furthermore, humidity influence has been investigated in the range from 10% to 80%, and a minor effect is shown. Therefore, we can conclude that rGO/PVA composites have a high potential for excellent passivation-free, humidity-independent, sensitive, and fast response temperature sensors for various applications. The GO reduction is tunable, and PVA improves the rGO/PVA sensor performance by increasing the tunneling effect and band gap energy, consequently improving temperature sensitivity. Additionally, PVA exhibits minimal water absorption, reducing the humidity sensitivity. rGO/PVA maintains its temperature sensitivity during and after several mechanical deformations.

Broadscale spatial synchrony in a West Nile virus mosquito vector across multiple timescales

Insects often exhibit irruptive population dynamics determined by environmental conditions. We examine if populations of the Culex tarsalis mosquito, a West Nile virus (WNV) vector, fluctuate synchronously over broad spatial extents and multiple timescales and whether climate drives synchrony in Cx. tarsalis, especially at annual timescales, due to the synchronous influence of temperature, precipitation, and/or humidity. We leveraged mosquito collections across 9 National Ecological Observatory Network (NEON) sites distributed in the interior West and Great Plains region USA over a 45-month period, and associated gridMET climate data. We utilized wavelet phasor mean fields and wavelet linear models to quantify spatial synchrony for mosquitoes and climate and to calculate the importance of climate in explaining Cx. tarsalis synchrony. We also tested whether the strength of spatial synchrony may vary directionally across years. We found significant annual synchrony in Cx. tarsalis, and short-term synchrony during a single period in 2018. Mean minimum temperature was a significant predictor of annual Cx. tarsalis spatial synchrony, and we found a marginally significant decrease in annual Cx. tarsalis synchrony. Significant Cx. tarsalis synchrony during 2018 coincided with an anomalous increase in precipitation. This work provides a valuable step toward understanding broadscale synchrony in a WNV vector.

The influence of storage conditions on the quality of Schisandra chinensis fruits: A integrated investigation of constituent and antioxidant activity

Schisandra chinensis is a functional fruit with tonic effect and was widely used by traditional Chinese medicine for treatment and health care. The quality of Schisandra chinensis fruit may vary by different storage condition. In this study, the influence of ambient temperature, humidity, packaging materials and period of storage on the quality of Schisandra chinensis fruits were investigated. The contents of main active components lignans and organic acids were simultaneously determined by ultra-performance liquid chromatography coupled to quadrupole electrostatic field orbitrap high resolution mass spectrometry (UPLC Orbitrap HRMS). The antioxidant activity was determined using DPPH radical scavenging capacity, ABTS+ inhibition rate and FRAP value. The correlation of multicomponent and antioxidant activity was analyzed by grey relevance analysis. Taking the changes of multicomponent and antioxidant activity as investigation index, Schisandra chinensis fruits under different storage conditions was comprehensively evaluated. Schisandrol A, malic acid, sorbic acid, schizandrin A, schizandrin B, and schisandrol B were the main effective components of antioxidant activity. Ambient temperature at 5 °C and humidity at 40 % were more suitable for Schisandra chinensis fruits and kraft paper bag was better packaging material. Do not exceed 1 year was the effective storage period. For the safety evaluation, no aflatoxin was detected within the storage period of 2 years, demonstrated the storage was satisfactory. This study provided a reference for the high-quality storage and standardized operating procedures for storage of Schisandra chinensis fruits.

A Study of the Influence of Cement Addition and Humidity on the Mechanical Strength and Microstructure of Flue Gas Desulfurization Gypsum-Cement Plasters.

Over the last 20 years, flue gas desulfurization gypsum (FGD gypsum) has become a valuable and widely used substitute for a natural raw material to produce plasters, mortars, and many other construction products. The essential advantages of FGD gypsum include its high purity and stability, which allow for better technical parameters compared to natural gypsum, and, until recently, its low price and easy availability. This FGD gypsum is obtained in the process of desulfurization of flue gases and waste gases in power plants, thermal power plants, refineries, etc., using fossil fuels such as coal or oil. The gradual reduction in energy production from fossil raw materials implemented by European Union countries until its complete cessation in 2049 in favor of renewable energy sources significantly affects the availability of synthetic gypsum, and forces producers of mortars and other construction products to look for new solutions. The gypsum content in commonly used light plaster mortars is usually from 50 to 60% by mass. This work presents the results of tests on mortars wherein the authors reduced the amount of gypsum to 30%, and, to meet the strength requirements specified in the EN 13279-1:2008 standard, added Portland cement in the amount of 6-12% by mass. Such a significant reduction in the content of synthetic gypsum will reduce this raw material's consumption, thus extending its availability and developing other solutions. The study presented the test results on strength, density, porosity, pore size distribution, and changes in the microstructure of mortars during up to 180 days of maturation in conditions of increased relative humidity. The results show that decreased porosity and increased mechanical strength occur due to the densification of the microstructure caused by the formation of hydration products, such as C-S-H, ettringite, and thaumasite.

Influence of humidity on the tribological performance of graphite reinforced aluminium anodic oxide coating

The effectiveness of graphite as self-lubricating reinforcement in anodic oxide is still unknown despite showing clear dependency towards water to provide lubrication. The objective of this study is to evaluate the tribological behavior of aluminium anodic oxide reinforced graphite coating under different relative humidity conditions. In this study, the oxide coating was reinforced with graphite varied between 0 to 20 gL−1. The graphite distribution, and structure hybridization were first analyzed. The coating with the highest sliding durability at room condition was tested under different relative humidity at 5 and 85 RH%. Overall, graphite reinforcement improved the coating’s hardness and roughness. Tribological wise, coating with 1 gL−1 of graphite reinforcement has the longest durability.

Photocatalytic removal of VOCs on TiO2 nanotube layers. Effect of layer thickness and humidity

The current work is focused on the influence of TiO2 nanotube (TNT) layer thickness, texture properties and chemical nature of volatile organic compounds (VOCs) on the efficiency of their photocatalytic oxidative removal. Attention was also given to the evaluation of the degree of mineralisation and the influence of air humidity. The fabricated TNT layers have a thickness from 2to13 μm, TiO2 mass from 0.27 to 1.15 mg cm−2, tube diameter of 108 ± 17 nm and porosity of 74 ± 5 %. Values of areal SBET determined from Kr adsorption are higher than the inner surface area of the TNT layer calculated from morphology parameters, this suggests the rough nature of the inner surface of nanotubes. Acetaldehyde was more easily degraded in comparison to hexane which was explained by a simpler chemical structure. The degree of acetaldehyde mineralisation was almost 100 %, suggesting the formation of no intermediates, analysis confirmed negligible formation of formaldehyde. In contrast, degree of hexane mineralisation was lower, 80 %. An increase in humidity has a negative effect on the photocatalytic performance; this effect is more significant for non-polar hexane compared to water-miscible acetaldehyde. The conversion of hexane and absorptance of the TNT layer at 365 nm increase similarly with increasing thickness. Hexane conversion increases significantly up to a layer thickness of about 4 μm where more than 80 % of incident light is absorbed. The simultaneous degradation of four pollutants (acetaldehyde, acetone, heptane and toluene) results in the highest degradation rate of acetaldehyde and the lowest for heptane, this was attributed to their different solubility in water as well as to their different adsorption.

Analysis of window opening in arctic community housing and development of data-driven models

Achieving low-energy, comfortable buildings in remote Arctic regions like Nunavik, Canada, presents multiple challenges due to high heating demand and limited energy supply. Understanding human behavior and the impact of practices on energy use is a key element in improving building performance. While previous research on building performance in Arctic regions has often adopted a building-centered approach, this study offers a complementary approach by investigating occupant behavior, focusing on window openings. The sample includes 10 monitored houses in the village of Quaqtaq, Nunavik. Data on weather conditions and window and door status were collected from September 2018 to August 2020. Behavior trends were identified using metrics such as the opening ratio, median duration of an opening, and number of openings. Correlations between opening/closing actions and the conditions of the outdoor environment were analyzed. Findings indicate that occupants interact more with common room windows and tend to leave bedroom windows open for longer periods. Time of the day, temperature, and relative humidity influence both opening and closing actions. Solar irradiance is also an important driver for open actions, while mean wind speed is significant in predicting closing actions. Data-driven models were developed using logistic regression. Comparison between predicted and real data demonstrated a good performance in estimating the opening ratio over the year and seasonal variations but a tendency to overestimate the number of openings and underestimate the duration of an opening.

Influence of light and humidity on the synthesis and characterization of perovskite FAPbI3 thin films

Influence of light and humidity on the synthesis and characterization of perovskite FAPbI3 thin films

Novel kinetic modeling of photocatalytic degradation of ethanol and acetaldehyde in air by commercial and reduced ZnO: Effect of oxygen vacancies and humidity

A comprehensive kinetic model has been developed to address the factors and processes governing the photocatalytic removal of gaseous ethanol by using ZnO loaded in a prototype air purifier. This model simultaneously tracks the concentrations of ethanol and acetaldehyde (as its primary oxidation product) in both gas phase and on the catalyst surface. It accounts for reversible adsorption of both compounds to assign kinetic reaction parameters for different degradation pathways. The effects of oxygen vacancies on the catalyst have been validated through the comparative assessment on the catalytic performance of commercial ZnO before and after the reduction pre-treatment (10% H2/Ar gas at 500 °C). The influence of humidity has also been assessed by partitioning the concentrations of water molecules across the gas phase and catalyst surface interface. Given the significant impact of adsorption on photocatalytic processes, the beginning phases of all experiments (15 min in the dark) are integrated into the model. Results showcase a notable decrease in the adsorption removal of ethanol and acetaldehyde with an increase in relative humidity from 5% to 75%. The estimated number of active sites, as determined by the model, increases from 7.34 10−6 in commercial ZnO to 8.86 10−6 mol gcat−1 in reduced ZnO. Furthermore, the model predicts that the reaction occurs predominantly on the catalyst surface while only 14% in the gas phase. By using quantum yield calculations, the optimal humidity level for photocatalytic degradation is identified as 25% with the highest quantum yield of 6.98 10−3 (commercial ZnO) and 10.41 10−3 molecules photon−1 (reduced ZnO) catalysts.

On the Influence of Humidity on a Thermal Conductivity Sensor for the Detection of Hydrogen.

Thermal conductivity sensors face an omnipresent cross-influence through varying humidity levels in real-life applications. We present the results of investigations on the influence of humidity on a hydrogen thermal conductivity sensor and approaches for predicting the behavior of thermal conductivity towards humidity. A literature search and comparison of different mixing equations for binary gas mixtures were carried out. The theoretical results were compared with experimental results from three different thermal conductivity sensors with mixtures of water vapor in nitrogen. The mixing equations show a large discrepancy between each other. Some of the models predict a continuously decreasing thermal conductivity and some predict an increasing thermal conductivity for increasing levels of humidity. Our measurements indicate an increase in thermal conductivity followed by a decrease after reaching a peak value. It is shown that the measured behavior is reproducible with different sensors. Depending on the sensor, this corresponds to an error up to 2 vol.% in the measured hydrogen value. The measured behavior is consistent with only one of the three models. Compared to this model, our own sensor shows a maximum deviation of 1.4%. Mixing equations for gas mixtures must be chosen carefully, taking into consideration whether mixing partners include polar or non-polar molecules. Some simplified mixing equations cannot be used to calculate the thermal conductivity of water vapor in air or nitrogen.

Experimental study on the performance of micro gas turbines under different intake environments

This article uses experimental methods to measure the operational performance and pollutant emissions of micro gas turbines in different intake environments, and analyzes the feasibility of replacing mine ventilation fans with micro gas turbines. The results show that when the compressor efficiency is increased from 70 % to 90 %, the total efficiency of the micro combustion engine is increased from 28% to 34 %, with an increase of up to 21.4 %. When the demand power is 25 kW, the fluctuation range of NOx emission concentration is within 5.4 %. When the intake opening is below 50 %, the effect is obvious. When the intake opening is reduced from 50 % to 25 %, the performance of the micro gas turbine decreases by 0.7 %; The influence of intake humidity on various operating parameters of micro gas turbines is generally within 3 %, which can meet the requirements of high humidity environment operation; The intake temperature has the greatest impact, with an increase in intake temperature leading to a decrease in power generation efficiency. After comprehensive analysis, we believe that the application of gas turbines in mines is feasible.

Predicting the strength development of 3D printed concrete considering the synergistic effect of curing temperature and humidity: From perspective of modified maturity model

This study aims to establish a development model for the compressive strength of 3D printed concrete (3DPC) under the coupling influence of temperature and humidity, utilizing the maturity method. Initially, diverse curing conditions were applied to 3D printed specimens, incorporating varying temperatures (10 °C, 20 °C, 40 °C) and relative humidity levels (100% RH, 80% RH, 60% RH, 40% RH), with strength value assessed at different ages. Subsequently, a maturity model for humidity modification was proposed, and the model was calibrated through experimental results. The results show that the strength of the specimens increases over time, irrespective of the variations in curing temperatures and humidity levels. Moreover, with a decrease in humidity level, a more pronounced decline in strength is observed. Furthermore, the anisotropy index values of the rate constant in the Y-direction specimen, when cured at temperatures of 10 °C and higher humidity conditions, such as 100% RH and 80% RH, exhibit significant variations across different temperatures and moisture levels, leading to increased anisotropies. The modified maturity model can be used to predict and evaluate the strength development of 3D PC under different environmental conditions with high accuracy.

Hydrochromic convertibility on fiberized self-assembling of copper-based perovskite quantum dots

Halide perovskite presents great competitive advantages in the new generation of stimuli-responsive materials, while the tuning of fluorescence emission is still limited by irritative factors and external conditions. Herein, anti-solvent assisted crystallization and in-situ synthesis are innovatively combined to accomplish the fiberized self-assembly of copper-based perovskite quantum dots economically and environmentally, which makes humidity a novel stimulus for luminescence regulation. Under the excitation of medium-wave UV, the original Cs3Cu2I5-CsCu2I3@polyacrylonitrile (CCI@PAN) fibers exhibit a main emission peak of 460 nm with a shoulder at 550 nm, and the intensity of shoulder peak is gradually increased with the continuous addition of moisture. Switching from blue to yellow fluorescence is achieved in CCI@PAN fiber membrane by the introduction of water, which is attributed to the ultra-high solubility of CsI in water. Moreover, owing to the spatial limitation of the nanofibers, the unique incomplete reversibility exhibited by the nanofiber membrane during water removal predicts that the nanofiber membrane can be used as a permanent recording material. Overall, this work deeply explores the influence of humidity on the fluorescence and structure of perovskite quantum dots, providing a method to synthesize innovative perovskite nanofiber composites based on emission conversion, which has broad prospects in advanced anti-counterfeiting, biological protection display, information encryption and smart wearable devices.

Adsorption Mechanisms of CO2 on Macroporous Ion-Exchange Resin Organic Amine Composite Materials by the Density Functional Theory.

The adsorption mechanisms of CO2 on macroporous cation exchange resin (MCER), D001 ion-exchange resin, and macroporous ion-exchange resin organic amine composite materials (MCER-DEA and D001-PEI) were studied by density functional theory (DFT). The adsorption energies and Mulliken atomic charges in the adsorption process were analyzed, indicating that CO2 on MCER and D001 were physisorbed. The adsorption heat of the adsorption process of MCER-DEA and D001-PEI was calculated by the Monte Carlo method, and it was found that the adsorption process of CO2 by MCER-DEA and D001-PEI was both physical adsorption and chemical adsorption. Besides, the chemical adsorption mechanism of CO2 by MCER-DEA and D001-PEI was investigated by analyzing the free energy barrier and the Gibbs free energy change of the involved chemical reactions and the results showed that the free energy barrier required for MCER-DEA to generate zwitterion was 26.23 kcal/mol, which is 1.74 times that of D001-PEI (15.04 kcal/mol); meanwhile, the free energy barriers of the deprotonation process of zwitterions in MCER-DEA and D001-PEI were 16.23 and 9.89 kcal/mol, respectively, indicating that D001-PEI chemically adsorbs CO2 and requires more energy than MCER-DEA chemical adsorption of CO2. D001-PEI is more conducive to the chemical adsorption of CO2. In addition, H2O molecules were incorporated on the polymer models to study the influence of humidity on the CO2 adsorption mechanism. The analysis revealed that the adsorption of CO2 slowed under humid conditions.

Enhanced Gas Sensing Performance of CuO-ZnO Composite Nanostructures for Low-Concentration NO2 Detection

The detection of nitrogen dioxide (NO2) is essential for safeguarding human health and addressing environmental sustainability. That is why, in the last decades, gas sensors have been developed to detect NO2 to overcome these hazards. This study explores the use of a novel CuO-ZnO composite synthesized through a polyol and sol–gel technique to enhance gas sensing performance. The CuO-ZnO composite offers the advantage of a synergic combination of its properties, leading to improved sensitivity, selectivity, and low detection limit. The innovative polyol technique employed in this research enables the controlled synthesis of hierarchical CuO and porous ZnO structures. The composite formation is achieved using the sol–gel method, resulting in CuO-ZnO composites with different ratios. The structural, morphological, and optical properties of the materials have been characterized using FESEM, X-ray diffraction, and UV-vis spectroscopy. Gas sensing experiments demonstrate enhanced performance, particularly in sensitivity and selectivity for NO2, even at low concentrations. The composites also exhibit improved baseline stability compared to pristine CuO and ZnO. This study explains the influence of humidity on gas sensing properties by examining interactions between water molecules and sensor surfaces. Notably, the developed CuO-ZnO composite displays excellent selectivity towards NO2, attributed to favorable bonding characteristics and acid-base properties. Overall, this research contributes to advancing gas sensor technology, providing a promising potential for sensitive and selective NO2 detection, thereby addressing critical needs for human health and environmental protection.

Influence of Humidity on Layer-by-Layer Growth and Structure in Coordination Networks.

Metal-organic frameworks (MOFs) are promising materials because of their high designability of pores and functionalities. Especially, MOF thin films and their properties have been investigated toward applications in nanodevices. Typically, MOF thin films are fabricated by using a bottom-up method such as layer-by-layer (LbL) growth in air. Because the water molecules can coordinate and be replaced with organic linkers during synthesis, humidity conditions will be expected to influence the LbL growth processes. In this study, we fabricated MOF thin films composed of Zn2+, tetrakis-(4-carboxyphenyl)-porphyrin (TCPP), and 4,4'-bipyridyl (bpy) at 10 and 40% relative humidity (RH) conditions. Then, we investigated the humidity effects on chemical compositions of TCPP and bpy, periodic structure, orientation, and surface morphology. At high RH, coordination replacement of water with the organic linkers becomes more competitive than that at low RH, resulting in a different TCPP/bpy composition ratio between the two RH conditions. Also, more frequent coordination replacements of water with the organic linkers at high RH led to the formation of phases other than that observed at low RH, loss of growth orientation, and rough surface. The findings clarified the importance of controlling the RH condition during LbL growth to obtain the desired coordination networks.

Assessment of the effect of moisture on the strength of concrete and ceramic masonry wall products

Introduction. The material of the article considers the strength characteristics of ceramic and concrete masonry products, the operation of which is carried out in difficult conditions. The analysis of domestic and foreign publications and sources carried out in this work, including the results of previously performed experiments and field studies, showed that the values of the tensile strength of concrete and ceramic masonry products largely depend on moisture saturation.
 
 Aim. When analyzing previously performed works, it was found that moisture saturation and operating conditions significantly affect the strength properties of concrete and ceramic masonry products in the form of bricks and small blocks. It is noted that in some cases, the effect of degradation of the physical and mechanical properties of the products was observed. When performing surveys of buildings and structures, it becomes necessary to determine the bearing capacity of the masonry of foundations and basement walls located below the mark of the adjacent ground surface. These structures are located in an environment of excessive humidity, therefore, the masonry products themselves are in a state of increased moisture saturation, for example, due to the absence or damage of waterproofing, violation of the heat and humidity regime of the indoor microclimate.
 
 Materials and methods. During the work, masonry ceramic products in the form of bricks were used – new ones made according to State Standard 530-2012; historical bricks selected during the inspection of buildings and structures of historical buildings, as well as concrete wall products made according to State Standard 6133-2019. The test procedure complies with the established standard State Standard R 58527-2019.
 
 Results. Conducting of the research and developing of methods to assess the effect of humidification of ceramic and concrete masonry products on the strength of masonry is important for assessing the reliability of buildings and structures.
 
 Conclusions. The current problem requires comprehensive studies of the strength characteristics of ceramic and concrete masonry wall products, taking into account the influence of humidity.

Influence of lower-tropospheric moisture on local soil moisture–precipitation feedback over the US Southern Great Plains

Abstract. ​​​​​​​Land–atmosphere coupling (LAC) has long been studied, focusing on land surface and atmospheric boundary layer processes. However, the influence of humidity in the lower troposphere (LT), especially that above the planetary boundary layer (PBL), on LAC remains largely unexplored. In this study, we use radiosonde observations from the US Southern Great Plains (SGP) site and an entrained parcel buoyancy model to investigate the impact of LT humidity on LAC there during the warm season (May–September). We quantify the effect of LT humidity on convective buoyancy by measuring the difference between the 2–4 km vertically integrated buoyancy with the influence of background LT humidity and that without it. Our results show that, under dry soil conditions, anomalously high LT humidity is necessary to produce the buoyancy profiles required for afternoon precipitation events (APEs). These APEs under dry soil moisture cannot be explained by commonly used local LAC indices such as the convective triggering potential and low-level humidity index (CTP / HILow), which do not account for the influence of the LT humidity. On the other hand, consideration of LT humidity is unnecessary to explain APEs under wet soil moisture conditions, suggesting that the boundary layer moisture alone could be sufficient to generate the required buoyancy profiles. These findings highlight the need to consider the impact of LT humidity, which is often decoupled from the humidity near the surface and is largely controlled by moisture transport, in understanding land–atmospheric feedbacks under dry soil conditions, especially during droughts or dry spells over the SGP.

Temporal and Spatial Foraging Activity of Indian Honey Bee (Apis cerana indica F.) at Different Migratory Sites

Migratory beekeeping increases honey production and reduces the feeding costs of stationary beekeeping during longer dearth periods. This study discerns the influence of environmental conditions on the foraging behavior of the Indian honey bee, Apis cerana indica F., at different migratory sites in Southern India. The total number of foraging bees, pollen foraging efficiency, and nectar foraging efficiency were estimated. Furthermore, the influence of environmental factors, including temperature, relative humidity, rainfall, and solar radiation, was recorded to identify its impact on the foraging behavior of honey bees. Among the climatic factors, maximum temperature (>30 °C) was the most crucial, negatively affecting bee activity with correlation coefficients of -0.83, -0.34, and -0.33 for outgoing bees, nectar, and pollen collectors, respectively. The relative humidity showed a positive impact on the frequency of worker bees moving out of the hive (r = 0.79), those coming in with nectar (r = 0.27), and pollen (r = 0.29). Rainfall hampered foraging activity, while solar radiation was found to have no significant effect on bee activity. Diurnal variations showed peak activity of bee foragers between 6.00 and 10.00 am. The visits by honey bees were significantly higher at low temperatures, solar radiation, precipitation, and high relative humidity. They made about 90% of their flower visits in the early morning, although plenty of bee flora was available throughout the day. Also, the environmental conditions at different sites strongly influenced the foraging behavior. However, the honey bees still focused their activities on favorable conditions depending on their biology and fixed their daily foraging patterns, improving beekeeping and honey production throughout the year.

Influence of selected parameters of the substrate of a microstrip textile antenna on changes in its resonance frequency under the influence of humidity

Textile antennas are one of the more essential parts of an electronic system incorporated in modern smart garments, used, for instance, for monitoring physiological signals. The article presents the study of the influence of selected parameters of the substrate of a textile microstrip antenna on the changes in its resonant frequency under the influence of changes in humidity. The impact of moisture was investigated for antennas with two different substrates: polyester and cotton. These materials differ significantly in their ability to absorb and release water. The article shows the construction of a measuring stand, measurement results for short and long-term exposure to moisture, and its statistical analysis. The obtained results indicate that textile antennas with a polyester substrate show more stability of the resonance frequency of the antenna compared to the antenna with a cotton substrate, regardless of changes in humidity. It has also been demonstrated that antennas exposed to prolonged, multi-day humidity variations exhibit higher changes in their resonant frequency than antennas subjected to short-term, 1-day variations.