Humid Climate Research Articles

PSII-14 Climate and conception: Investigating the resilience of equine embryo survival to ambient temperatures in southeast Texas

Abstract Amidst the unique challenges posed by the humid and hot climate of southeast Texas, this study aimed to assess the establishment of pregnancy from transferred equine embryos, hypothesizing that an increase in ambient temperature would lead to a decrease in pregnancy establishment. To achieve this, we utilized 17 embryo donors and 46 recipient mares (3 to 9 yr of age), all anatomically and clinically normal with no history of reproductive problems. Breeding records for 49 transferred d 8, grade-1 embryos from a single private horse farm in southeast Texas, along with the reported high and low ambient temperatures on the day of transfer, were analyzed using logistic regression via PROC GLIMMIX in SAS v9.4 with fixed effects for the reported high and low ambient temperatures on the day of transfer, with a random statement for donor and sire. The pregnancy rate for all embryo transfers was 79%. Surprisingly, our results revealed that neither the reported high ambient temperatures (P = 0.16) nor reported low ambient temperatures (P = 0.19) significantly influenced the likelihood of pregnancy establishment observed at d 14 post-ovulation of transferred equine embryos. Furthermore, no statistically significant influence (P > 0.05) on pregnancy establishment was observed when embryo transfers were conducted outside of the thermal neutral zone (5°C to 20°C). Within the context of our study, these results suggest that environmental temperatures in southeast Texas do not significantly impact equine pregnancy outcomes.

Коррозионные характеристики композитов БрАМц9-2/06Х18Н9Т, полученных двухпроволочным электронно-лучевым аддитивным производством

Introduction. The development of novel materials based on copper alloys and stainless steel, as well as the determination of the optimal parameters for its processing make it possible to expand the area of its implementation, increase efficiency and service life of tools and constructions. The load-bearing parts of marine equipment (bearing constructions, piston cylinders, pumps, valves, gears, rotary instruments, etc.), made of austenitic steels or aluminum bronze, are in direct contact with sea water, so the problem of increasing its corrosion resistance in the presence of strong oxidizing agents (Cl-, F- anions) is relevant. One of the advanced and actively researched methods for producing copper/steel composites is additive manufacturing that allow fabricating complex parts through layer-by-layer growth. In particular, the synthesis of composites based on aluminum bronze and steel can be realized by wire-feed electron beam additive manufacturing. In order to implement composite materials produced via additive technologies in a humid (marine) climate, it is necessary to ensure not only high strength, but also corrosion properties. The purpose of this work is to study the corrosion resistance of composites, based on aluminum bronze CuAl9Mn2 and stainless steel ER 321 produced by dual-wire-feed electron beam additive manufacturing. Research methods. Examination of the surface of CuAl9Mn2/ER 321 composites before and after corrosion tests was carried out by methods of voltammetry and electrochemical impedance spectroscopy using a potentiostat-galvanostat. Results and discussion. Using a complex of electrochemical methods, it is revealed that the developed composites with a volume fraction of steel ≥ 25% demonstrate a significant decrease in anodic current densities and a simultaneous increase in charge transfer resistance. Composites with a steel content of 75 vol. % are characterized by the highest corrosion properties in 3.5 wt. % NaCl solution, which is referred to a reduction in corrosion rate by 9.5 times compared to aluminum bronze. It is shown that the main processes occurring on the surface of the composites (CuAl9Mn2 + ER 321) are anodic oxidation of copper and iron, leading to the formation of corrosion products – Cu2O and FeCl2.

423 Comparative post-weaning performance characteristics of four breeds of rabbit in hot humid climate of Nigeria

Abstract Rabbits are one of the most popular livestock breeds raised for their meat, fur, and companionship. Rabbit meat is fast gaining prominence as a healthier meat compared with beef, mutton, pork and chevon, which are mostly consumed in Nigeria. This study investigated breed differences in mortality, survival rates and post-weaning growth rate of rabbits reared under inimical environmental conditions. The animals were fed commercially compounded feed with 18% crude protein and 2300Kcal metabolizable energy with intermittent feeding of Panicum sp and Tridax sp. The study area, located at latitude 6.5867° N and longitude 3.9700° E, had an average daily temperature of 35°C and relative humidity of 64%, which negatively impacted the adaptation, survival rates and growth performance of the rabbits. A total of 48 weaner rabbits 8 wk of age, comprising 12 each (9 does and 3 bucks) of Checkered, Chestnut, Dutch and Hyla breeds were reared for 10 wk post-weaning. Mortality was recorded across the breeds and the body weights (BW) of the rabbits were also recorded on a weekly basis for the entire 10-wk period. The study evaluated survival rates across breeds and sex and BW gain. Statistical analyses were conducted using the Minitab software for Chi Squared test of independence for counts and descriptive statistics and general linear model analysis of variance for bodyweight gain. The statistical model describing the analysis was Yijk = µ + αi + (α:β)ij + eijk where αi is the ith fixed effect of breed and βj is the jth fixed effect of sex. The model accounted for 67.03% variation in total weight gain. Further mean separation was done using the Tukey’s multiple comparison procedure. Mortality rates across breeds on the average was 56.25%, with Checkered, Chestnut, Dutch and Hyla respectively recording 66.67%, 41.67%, 50.00% and 66.67% mortality, respectively. Mortality rate across sexes was 63.89% for does and 33.33% for bucks; however, mortality rates were independent (P > 0.05) of both breed and sex with a Chi-Squared value of 2.285 and 3.41, respectively, despite the numerical differences in mortality rates across breeds and sexes. Average total BW gain during the study period across the breeds and within breeds is as presented in Table 1. The nesting of sex within breed revealed that the only significant (P > 0.05) difference was noticed between the Hyla buck and Chestnut doe, while other means were not statistically different (P > 0.05). The Chestnut breed with the least BW gain adapted well in the environment with greatest survival rate, while the Hyla breed had the greatest BW gain and least survival rate throughout the study. This study indicated a negative relationship between survival rates and BW gain, that lighter breeds of rabbit tend to have greater survival rates than the heavier breeds.

Depositional environment and stratigraphic framework of the NS- 1 well, Coastal Swamp Depobelt, Niger Delta Basin: a foraminiferal perspective

A comprehensive analysis of 102 ditch-cutting samples from the NS-1 well in Leuma Field, Coastal Swamp Depobelt, Niger Delta Basin, covering depths from 4730 ft to 7790 ft, is presented. Lithologic descriptions revealed eleven lithostratigraphic sub-units within the transitional-paralic sequence of the Agbada Formation, comprising alternating sandstone and shale. The foraminiferal analysis identified 58 species: 14 planktonic, 26 calcareous benthic and 18 agglutinated benthic. Key planktonic index species such as Globigerinoides sp. and Globorotaliacontinuosa indicates a Middle to Late Miocene age. The biozonation correlates with the Blow (1969) Scheme (N7- N9/N10/N11) placing the intervals within the Middle Miocene to Late Miocene epochs. The depositional environment transitioned from Coastal Deltaic to Inner Neritic and Middle Neritic, suggesting a shallow marine setting influenced by a warm, humid climate. The presence of calcareous foraminifera supports a shallow marine deposition above the carbonate compensation depth. This study provides valuable insights into the sedimentological, stratigraphic, and paleoenvironmental history of the NS-1 well during the Miocene.

Calibration and evaluation of various reference evapotranspiration estimation methods in a humid subtropical climate: A case study in Samsun Province, Türkiye

Reference evapotranspiration is crucial for estimating plant water needs and managing resources. Simplifying the Penman-Monteith model by reducing input parameters and local calibration can enhance efficiency and reliability. In this study, three empirical formulas—Hargreaves and Samani (HS, 1985), Priestley and Taylor (PT, 1972), and the World Meteorological Organization (WMO, 1966)—representing temperature-, solar radiation-, and mass-transfer-based approaches, respectively, were evaluated. To achieve this objective, meteorological data from five synoptic stations situated in the Samsun province in the Black Sea region of Türkiye, were utilized. Three methods, namely the traditional method, regression analysis, and genetic algorithm, were employed to estimate the local calibration coefficients of empirical equations based on the Penman-Monteith 56 equation. Finally, the outcomes were evaluated based on four criteria: root-mean-square error, coefficient of determination, mean bias error, and percentage error of estimate. The results of empirical formulas both before and after calibration were analyzed. Prior to calibration, HS and PT exhibited greater accuracy for the case study. This accuracy trend was also observed in the calibrated results. Additionally, among the three employed calibration methods, regression analysis and traditional methods demonstrated a higher level of accuracy.

Late Holocene vegetation history and monsoonal climate change from the Core Monsoon Zone of India

To understand the vegetation response to climate change and the Indian Summer Monsoon rainfall (ISMR) variability during the Late Holocene (approx. 2.5 ka), pollen analysis was conducted on a 1.2-m-long lacustrine sediment profile from the Korba District of Chhattisgarh, central India, within the core monsoon zone (CMZ). The pollen evidence suggest that between approx. 2500 and 1950 cal yr BP, open tropical deciduous forest vegetation occupied the landscape under a warm and relatively less humid climate, coupled with decreased ISMR. Between approx. 1950 and 1035 cal yr BP, a warm and relatively more humid climate prevailed, along with moderate ISMR, leading to the transition of the existing vegetation to an open mixed tropical deciduous forest. Between approx.1035 and 220 cal yr BP (CE 915–1730), the mixed tropical deciduous forest became established under a warm and humid climate with increased ISMR, coinciding globally with the Medieval Climatic Anomaly (MCA). Mixed tropical deciduous forest expanded and transformed into a dense mixed tropical deciduous forest between approx. 220 cal yr BP to the present (CE 1730 onwards). This transformation occurred under a warm and relatively more humid climate, accompanied by intensified ISMR, aligning with the Current Warm Period (CWP). Gradual forest transformation from open vegetation to dense mixed tropical deciduous forests, as well as in the ISMR has been observed since the last approx. 2.5 ka in central India. Cereal-based agricultural practices and other anthropogenic activities have been documented in the study area since approx. 2.5 ka, with an accelerated pace observed from 1035 cal yr BP to the present.

The threat from ozone to vegetation in Ireland

Ozone is the most damaging air pollutant to vegetation globally. Metrics of accumulated ozone above a concentration threshold (e.g. AOT40, ppb·h) have been widely used to assess ozone risk. However, there is growing consensus that accumulated Phytotoxic Ozone Dose (POD) above a receptor-specific critical stomatal flux threshold (y; nmol O3 m−2 s−1), expressed per unit of projected leaf area, provides a more reliable risk assessment, as it considers ozone entering the leaf (PODy, mmol m−2 leaf area). Few studies have assessed both concentration- and flux-based metrics using site-specific observations of ozone and meteorology. In this study we assessed the risk that ozone poses to five vegetation types across eight sites in Ireland during 2005–2021, using AOT40 and PODy risk metrics, and we predicted impacts using dose–response relationships. Long-term trends in both metrics were also assessed. The PODy critical level for vegetation protection was exceeded for all vegetation types, with exceedances most common at Atlantic coastal sites, and for tree species (beech POD1 15.7–25.7 mmol/m2 PLA). When PODy and AOT40 results were normalised based on their respective critical levels, predicted impacts were higher for PODy. There were significant increases in PODy for three vegetation types at rural sites during the study period, which also experienced increases in temperature and global solar radiation. The long-term trends were consistent with other European studies that show decreases in AOT40 and increases in PODy. While ozone concentrations in Ireland are relatively low (39–75 μg/m3 five-year average range), the humid climate and longer growing season may lead to elevated stomatal ozone uptake and thereby a risk to vegetation.

Mineral composition of lake Sabakty sediments as an indicator of paleoclimate, Southern Urals, Russia

Relevance. Reconstruction of climatic changes based on the lacustrine sediments of lakes makes it possible to identify climatic trends and events in the late Quaternary. The Urals is considered as one of the climatic divisions, therefore, studies of the conditions of lake sedimentation, including climatic ones, are relevant in this area. Aim. To study mineral composition as an indicator of paleoclimate of Lake Sabakty sediments. Object. Core of Lake Sabakty sediments (length is 298 cm). The age of the core is ~25 thousand years old. Materials and methods. Sampling was carried out taking into account seismoacoustic data, lithological description, as well as measurements of magnetic susceptibility and radiometric dating data. The granulometric analysis was carried out by laser granulometry using a Bluewave particle size analyzer (Microtrac, USA) combined with a sample loading and circulation system with an integrated ultrasonic dispersant. Mineral composition of the sediments was determined using the D2 PHASER X-ray diffractometer and the Merlin auto-emission scanning electron microscope. Results. The predominance of the siltstone fraction was established. The mineral composition is characterized by the predominance of allotigenic minerals in sediments (quartz, microcline, albite, mica, chlorite, mixed-layer clay minerals, hornblende, kaolinite) according to X-ray diffraction and electron microscopy. Autigenic minerals include biogenic silica (cristobalite, tridymite), pyrite, carbonates (calcite, dolomite), sulfates (gypsum, barite). Conclusions. The ratio of allogenic and autogenic components reflects the changes in the accommodation of the reservoir and the supply of clastic material associated with changes in climate humidity. Changes in climate humidity are reflected in changes in the contents of carbonate and sulfate minerals. At the beginning of sedimentation, Lake Sabakty was shallow and mineralized due to climate aridization, which probably included the global Bond 8 event (~26000–11700 BP). The study of the mineral composition of the sediments of Lake Sabakty allowed us to establish the events of climate aridization: ~10000 BP, ~7600 BP, ~6900 BP ~1900 BP and ~1400 BP. In Sabakty Lake, there is a bright episode of a decrease in climate humidity in the range of ~7300-5200 BP, which is marked by an increase in carbonate content up to 70% and the detection of gypsum at ~6900 BP.

A comparative study of the potentials of Oman and UAE in condensate water recovery

<p class="MsoNormal" style="text-align: justify; text-justify: inter-ideograph; line-height: 120%; mso-pagination: none; layout-grid-mode: char; mso-layout-grid-align: none; text-autospace: none; margin: 12.0pt 0cm 6.0pt 147.4pt;"><span lang="EN-US" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif;">Freshwater is essential for everyday activities including drinking, irrigation, farming and many industrial processes. However, freshwater is less than 1% of the total water resources in the planet and, therefore, it is considered a very valuable commodity. Limited resources and growing needs for freshwater triggered global exploration for alternatives to produce enough freshwater for human needs. Today’s most widely used methods to produce freshwater is desalination. However, critical appraisal of the desalination procedures raised the alarm about </span><span lang="EN-GB" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif; mso-fareast-font-family: 宋体; mso-font-width: 105%; mso-font-kerning: 0pt; mso-ligatures: none; mso-ansi-language: EN-GB;">sustainability</span><span lang="EN-US" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif;"> of desalination and indicated that significant research is needed to develop alternative green resources of freshwater. Countries in the Gulf area such as Oman and UAE experience hot and humid climates and use air-conditioning units to achieve acceptable comfort levels and create a </span><span lang="EN-GB" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif; mso-fareast-font-family: 宋体; mso-font-width: 105%; mso-font-kerning: 0pt; mso-ligatures: none; mso-ansi-language: EN-GB;">healthier</span><span lang="EN-US" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif;"> indoor environment. The cooling process release a large amount of condensate water through cooling coils. This amount of water is usually considered as a problem rather than opportunity and, thus, is wasted into municipal sewerage systems via a system of drainage pipes. This alternative source can be utilized in various drainage, irrigation, and cooling applications to reduce the use of considerable amount of municipal potable water. This source not only takes part in controlling the water scarcity, but also in saving energy and to reducing the carbon footprint. This paper focus on highlighting the opportunities for Oman and UAE to utilize the condensate water from air-conditioning process, as a viable alternative source of green </span><span lang="EN-GB" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif; mso-fareast-font-family: 宋体; mso-font-width: 105%; mso-font-kerning: 0pt; mso-ligatures: none; mso-ansi-language: EN-GB;">fresh</span><span lang="EN-US" style="font-size: 10.0pt; line-height: 120%; font-family: 'Times New Roman',serif;"> water. It provides a comparison of the potentials of both countries to collect condensate water, based on meteorological data, location and climate. It was concluded that both countries have great potentials and opportunities to utilize this wasted resource. </span></p>

Global scale assessment of urban precipitation anomalies

Urbanization has accelerated dramatically across the world over the past decades. Urban influence on surface temperatures is now being considered as a correction term in climatological datasets. Although prior research has investigated urban influences on precipitation for specific cities or selected thunderstorm cases, a comprehensive examination of urban precipitation anomalies on a global scale remains limited. This research is a global analysis of urban precipitation anomalies for over one thousand cities worldwide. We find that more than 60% of the global cities and their downwind regions are receiving more precipitation than the surrounding rural areas. Moreover, the magnitude of these urban wet islands has nearly doubled in the past 20 y. Urban precipitation anomalies exhibit variations across different continents and climates, with cities in Africa, for example, exhibiting the largest urban annual and extreme precipitation anomalies. Cities are more prone to substantial urban precipitation anomalies under warm and humid climates compared to cold and dry climates. Cities with larger populations, pronounced urban heat island effects, and higher aerosol loads also show noticeable precipitation enhancements. This research maps global urban rainfall hotspots, establishing a foundation for the consideration of urban rainfall corrections in climatology datasets. This advancement holds promise for projecting extreme precipitation and fostering the development of more resilient cities in the future.

Factors Affecting the Indoor Air Quality and Occupants’ Thermal Comfort in Urban Agglomeration Regions in the Hot and Humid Climate of Pakistan

The World Air Quality Index indicates that Pakistan ranks as the third most polluted country, regarding the average (Particulate Matter) PM2.5 concentration, which is 14.2 times higher than the World Health Organization’s annual air quality guideline. It is crucial to implement a program aimed at reducing PM2.5 levels in Pakistan’s urban areas. This review paper highlights the importance of indoor air pollution in urban regions such as Lahore, Faisalabad, Gujranwala, Rawalpindi, and Karachi, while also considering the effects of outdoor air temperature on occupants’ thermal comfort. The study aims to evaluate past methodological approaches to enhance indoor air quality in buildings. The main research question is to address whether there are statistical correlations between the PM2.5 and the operative air temperature and whether other indoor climatic variables have an impact on the thermal comfort assessment in densely built urban agglomeration regions in Pakistan. A systematic review analysis method was employed to investigate the effects of particulate matter (PM2.5), carbon oxides (COx), nitrogen oxides (NOx), sulfur oxides (SOx), and volatile organic compounds (VOCs) on residents’ health. The Preferred Reporting Items for Systematic Reviews and Meta Analyses (PRISMA) protocol guided the identification of key terms and the extraction of cited studies. The literature review incorporated a combination of descriptive research methods to inform the research context regarding both ambient and indoor air quality, providing a theoretical and methodological framework for understanding air pollution and its mitigation in various global contexts. The study found a marginally significant relationship between the PM2.5 operative air temperature and occupants’ overall temperature satisfaction, Ordinal Regression (OR) = 0.958 (95%—Confidence Interval (CI) [0.918, 1.000]), p = 0.050, Nagelkerke − Regression (R2) = 0.042. The study contributes to research on the development of an evidence-based thermal comfort assessment benchmark criteria for the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Global Thermal Comfort Database version 2.1.

Hydrothermal and mechanical performance of mortars containing waste brick powder

It is widely recognised that green building, environmental sustainability, and technical performance have recently become requirements in the field of civil engineering. For this reason, the new trend in research is to focus on the recycling and recovery of materials, even if some of them such as industrial waste are still underexplored. In this perspective, the main objective of this work is to study the influence of brick powder on the thermophysical and mechanical properties of mortars containing this type of waste, in different environments, and within the temperature range between ambient temperature and 50 °C. To this end, a number of mortar mixtures, in which cement was replaced by brick powder in different proportions, were studied and characterised according to technical standards in order to define the optimal substitution percentage. Three batches of samples were examined at different ages, i.e., 3, 7, 28, and 90 days. The samples of the first batch were kept in water at a temperature of 20 ± 2 °C with a relative humidity RH = 100 %, while those of the second batch were immersed and stored in water at 50 °C in order to simulate a hot and humid climate. As for the samples of the third batch, they were kept in a dry oven at 50 °C in order to investigate the effect of the hot and dry climate. The results obtained revealed that the partial replacement of cement by brick powder makes it possible to improve the thermal insulation characteristics but reduce the mechanical strength of the mortar. In addition, it was shown that in a hot and dry environment, the mechanical characteristics of the different mortars decrease as the rate of weight substitution of cement by brick powder rises. However, in a hot and humid environment, a reverse trend is observed. The findings also suggested that the optimal recommended rate of substitution of cement by brick powder is 20 %.

Performance Evaluation of Stress Tolerant Rice Variety Swarna Shreya under Front Line Demonstration in Bolangir District, Odisha

Rice is the major crop of Odisha with a total coverage of 41 lakh ha which is about 65% of the total cultivable area of the state. Area under rice crop in Bolangir district is 218.97 thousand ha. Bolangir District is located under Western Central Table Land Agro climatic Zone characterized by hot and sub humid climate. About 168.91 thousand ha rice is under rainfed condition. Drought is a major abiotic stress that adversely affects the rice growth, mostly in the rainfed ecosystem that ultimately affects the biomass production and yield. Front line demonstrations have been conducted in NICRA adopted village- Odiapali, Block- Bolangir in the Kharif season of the year 2022 and 2023. The percentage increase in yield is 13.63 and 14.61 and net return is Rs 42,200/- and Rs 43,444/- per ha as compared to farmer’s practice variety Swarna’ performance respectively for the year 2022 and 2023.

Transcriptome analysis and genome-wide identification of the dehydration-responsive element binding gene family in jackfruit under cold stress

BackgroundJackfruit (Artocarpus heterophyllus Lam.) is the world’s largest and heaviest fruit and adapts to hot, humid tropical climates. Low-temperature injury in winter is a primary abiotic stress, which affects jackfruit growth and development. Therefore, breeding cold-resistant varieties and identifying the vital genes in the process of cold resistance are essential. The dehydration-responsive element binding (DREB) gene family is among the subfamily of the APETALA2/ethylene response factor transcription factor family and is significant in plant abiotic stress responses.MethodsIn this study, a comparative analysis of the cold resistance property of ‘GuangXi’ (‘GX’) and ‘Thailand’ (‘THA’) jackfruit strains with different cold resistance characteristics was performed through chlorophyll fluorescence and transcriptome sequencing.ResultsWe found that differentially expressed genes (DEGs) are significantly enriched in the metabolic processes. Here, 93 DREB genes were identified in the jackfruit genome, and phylogenetic analysis was used to classify them into seven groups. Gene structure, conserved motifs, chromosomal location, and homologous relationships were used to analyze the structural characteristics of the DREB family. Transcriptomics indicated that most of the AhDREB genes exhibited down-regulated expression in ‘THA.’ The DEGs AhDREB12, AhDREB21, AhDREB29, and AhDREB34 were selected for quantitative real-time PCR, and the results showed that these genes also had down-regulated expression in ‘THA.’ConclusionsThe above results suggest the significance of the DREB family in improving the cold resistance property of ‘GX.’

Molecular identification of Malassezia from the skin scrapings of clinically suspected cases of pityriasis versicolor.

Pityriasis versicolor (PV) is caused by a lipophilic fungus belonging to the genus Malassezia. Potassium hydroxide (KOH) mount is most frequently used for screening of cases and culture is the gold standard. KOH lacks sensitivity, and culture is time-consuming and technically demanding. A cross-sectional study was conducted at a tertiary care teaching institution. We aimed to use multiplex-PCR for faster and accurate identification of Malassezia spp directly from skin scrapings of suspected cases of PV. The study was conducted on suspected cases of PV over a period of 12 months. The clinical and demographic details were recorded. The skin scrapings were subjected to KOH mount and cultured on Sabouraud's dextrose agar with an olive oil overlay. Multiplex-PCR targeting 11 Malassezia spp was performed on DNA extracted from skin scrapings. A total of 69 suspected cases of PV were studied. Most patients belonged to metro cities and worked in hot and humid climates. The mean duration of lesions was 18 months, and most had macular and patchy lesions. The sensitivity of KOH and culture was found to be 82.6% and 91.3%, respectively. M. globosa (n = 60, 87%) and M. restricta (n = 3, 4.3%) were isolated in culture. Multiplex PCR detected 85.5% of M. globosa, 5.8% of M. restricta, and 8.7% of mixed infection with M. globosa and M. restricta. M-PCR detected Malassezia in all the samples. M-PCR could identify Malassezia species directly from skin specimens, eliminating the need for culture. M-PCR was accurate, dependable, and exhibited a rapid turnaround time.

Integrating aboveground and underground environments to enhance underground natural ventilation in the tropics: Case studies in Singapore

Ventilation is the primary solution for addressing elevated temperatures, humidity, and pollution with underground environments. Underground natural ventilation stands as a historical and promising strategy to reduce energy consumption and diminish reliance on mechanical ventilation. This study integrates aboveground and underground environments to enhance underground natural ventilation in the tropics. Initially, the study employed field measurements and computational fluid dynamics simulations to compare the natural wind environments and architectural designs of enclosed and detached condominiums in Singapore. The results demonstrate a strong correlation between the aboveground and underground wind environments in the enclosed condominium, revealing distinctive airflow patterns conducive to ample ventilation. Conversely, the basement of the detached condominium lacked natural ventilation and had tenuous connections to aboveground wind environments despite incorporating numerous skylights and side windows. Subsequently, the study proposes optimising architectural designs for row buildings through cross ventilation, sunshade, and greenery inspired by the architectural design of the enclosed condominium. Moreover, this study suggests some design strategies applicable to the tropics in hot and humid climates. These findings help architects and engineers create sustainable, natural, airy underground spaces.

Mowing Height and Fertility Regime Effects on Tall Fescue Turf in the Pacific Northwest

The western portion of the Pacific Northwest is known for being dry in the summer and cool and humid in the other months. Tall fescue is valued for its drought and heat tolerance, making it a desirable choice in regions where water is scarce and often restricted by legislation during periods of drought in the summer. However, cool and humid climates make it challenging to manage tall fescue in the winter because unacceptable quality is often observed due to low-temperature diseases and thinning in turf. A field trial was initiated in Autumn 2020 in Corvallis, OR, USA to assess the effects of mowing height as well as fertility timing and rate on tall fescue performance. Two mowing heights of 5.1 and 7.6 cm, four seasonal fertility timings, and three levels of annual N rates of 98, 196, and 294 kg·ha−1·yr−1 were evaluated using a 2 × 4 × 3 factorial experiment in a strip-plot design. Quantitative data of percent green cover and normalized difference vegetation index (NDVI) suggest that autumn fertilization is needed in cool, humid areas where tall fescue is actively growing in the winter months. The annual fertilization rate of 294 kg·ha−1·yr−1 N produced higher green turf cover and NDVI, compared with 98 or 196 kg·ha−1·yr−1 N. Furthermore, divergent effects of mowing heights were observed during winter compared with other months, suggesting that tall fescue could be mowed lower at 5.1 cm during cool, humid winter months and higher at 7.6 cm in other seasons for better overall turfgrass growth and less winter disease and thinning. Our research provides practical cultural practices for managing tall fescue turf in the Pacific Northwest or similar climates.

Role of Urban Trees in Enhancing the Thermal Comfort of Rapidly Urbanizing Cities: An Analysis of Tropical Asian Tree Species Based on Physiological Equivalent Temperature (PET)

AbstractBackgroundThermal comfort significantly influences well-being, productivity, and living conditions in outdoor environments, particularly in rapidly urbanizing, warm, humid tropical climates. This study assessed the influence of 5 five common urban tree species (Cassia fistula,Tectona grandis,Plumeria obtusa,Mangifera indica, andTerminalia catappa) on outdoor thermal comfort, using the physiological equivalent temperature (PET) index in Colombo, Sri Lanka, as a case study for a tropical humid city.MethodsField data collection encompassed measuring air and surface temperature, relative humidity, wind velocity, solar radiation, cloud cover, and sky view factor under tree canopies and adjacent exposed areas. The RayMan model was employed to estimate PET in both areas.ResultsOur findings indicated that PET was consistently higher in exposed areas compared to under the tree canopy, with an average difference of 5.61 °C. Among tree parameters, sky view factor (SVF) demonstrated the most significant correlation with thermal comfort, followed by crown diameter and tree height. Furthermore, notable variations in thermal comfort were observed among tree species, withTerminalia catappaoutperformingPlumeria obtusa, particularly on sunny days.ConclusionRegression analysis highlighted the importance of integrating trees with large crowns and low SVF to create thermally comfortable outdoor spaces. Consequently,Terminalia catappaemerged as the most suitable tree species for enhancing thermal comfort in Colombo’s outdoor urban areas out of the 5 selected species. These insights will aid in selecting appropriate tree species and parameters, fostering improved outdoor thermal comfort in tropical humid cities, and facilitating sustainable urban planning and design strategies.

The adaptation of dryland crops to the climate in southern China

It is unclear how dryland crops adapted to the humid climate of southern China, nevertheless they were an important component of prehistoric agricultural systems in the region. In this study, archaeobotanical results assembled from 110 archaeological sites in southern China, Digital Elevation Model (DEM)-based slope results of these archaeological sites, regional meteorological data and paleoclimate records were used to analyse the main factors affecting the distribution of prehistoric dryland agriculture, to help understand the adaptation of this agriculture to southern China and assess the role of climate change in the expansion of dryland crops in the region. The results highlighted the importance of effective water input and temperature. Farmers in prehistoric times adopted diverse strategies to plant dryland crops in southern China. The main proportion of the dryland crops centred on the use of foxtail millet (over 75% of the total dryland crops) and it was adjusted to adapt to the variations in effective water inputs resulting from precipitation and topography in the low-elevation area. Approximately 3° might be the slope threshold for agricultural transformation in the low-elevation humid areas of southern China. The millets-dominated (61.7%) or rice-dominated (85.3%) agricultural systems in dry-hot valleys, and wheat-dominated (51.8%) agriculture in the west Yunnan-Guizhou Plateau were developed to adapt to the arid climate and the low summer temperature, respectively. The weakening of the Asian monsoon since 5000 BC had objectively favoured the expansion of dryland agriculture in the low-slope areas of southern China, but the role of climate change should not be overestimated in the expansion of dryland crops.

On the Necessity for Improving Water Efficiency in Commercial Buildings: A Green Design Approach in Hot Humid Climates

Water, a fundamental and indispensable resource necessary for the survival of living beings, has become a pressing issue in numerous regions worldwide due to scarcity. Urban areas, where the majority of the global population resides, witness a substantial consumption of blue water, particularly in commercial buildings. This study investigates the potential for enhancing water efficiency within an ongoing high-rise office building construction situated in a tropical climate. The investigation utilizes the green building guidelines of leadership in energy and environmental design (LEED) through a case-study-based research approach. Strategies included using efficient plumbing fixtures (such as high air–water ratio fixtures and dual-flush toilets), the selection of native plants, implementing a suitable irrigation system, introducing a rainwater harvesting system (RWHS) and improving the mechanical ventilation and air conditioning (MVAC) system. The results showed a 55% reduction in water use from efficient fixtures, a 93% reduction in landscaping water needs and a 73% overall water efficiency with a RWHS from the baseline design. Additionally, efficient cooling towers and the redirection of condensed water into the cooling tower make-up water tank improved the overall water efficiency to 38%, accounting for the water requirements of the MVAC system. The findings of this study can contribute to more sustainable and water-efficient urban development, particularly in regions facing water scarcity challenges. The significance of these findings lies in their potential to establish industry standards and inform policymakers in the building sector. They offer valuable insights for implementing effective strategies aimed at reducing blue water consumption across different building types.