Monitoring Of Human Vital Signs Research Articles

Motion-Resistant Remote Imaging Photoplethysmography Based on the Optical Properties of Skin

Remote imaging photoplethysmography (RIPPG) can achieve contactless monitoring of human vital signs. However, the robustness to a subject’s motion is a challenging problem for RIPPG, especially in facial video-based RIPPG. The RIPPG signal originates from the radiant intensity variation of human skin with pulses of blood and motions can modulate the radiant intensity of the skin. Based on the optical properties of human skin, we build an optical RIPPG signal model in which the origins of the RIPPG signal and motion artifacts can be clearly described. The region of interest (ROI) of the skin is regarded as a Lambertian radiator and the effect of ROI tracking is analyzed from the perspective of radiometry. By considering a digital color camera as a simple spectrometer, we propose an adaptive color difference operation between the green and red channels to reduce motion artifacts. Based on the spectral characteristics of photoplethysmography signals, we propose an adaptive bandpass filter to remove residual motion artifacts of RIPPG. We also combine ROI selection on the subject’s cheeks with speeded-up robust features points tracking to improve the RIPPG signal quality. Experimental results show that the proposed RIPPG can obtain greatly improved performance in accessing heart rates in moving subjects, compared with the state-of-the-art facial video-based RIPPG methods.

Miniature implantable and wearable on-body antennas: towards the new era of wireless body-centric systems [antenna applications corner

Wireless body-centric sensing systems have an important role in the fields of biomedicine, personal healthcare, safety, and security. Body-centric radio-frequency identification (RFID) technology provides a wireless and maintenance-free communication link between the human body and the surroundings through wearable and implanted antennas. This enables real-time monitoring of human vital signs everywhere. Seamlessly integrated wearable and implanted miniaturized antennas thus have the potential to revolutionize the everyday life of people, and to contribute to independent living. Low-cost and low-power system solutions will make widespread use of such technology become reality. The primary target applications for this research are body-centric sensing systems and the relatively new interdisciplinary field of wireless brain-machine interface (BMI) systems. Providing a direct wireless pathway between the brain and an external device, a wireless brain-machine interface holds an enormous potential for helping people suffering from severely disabling neurological conditions to communicate and manage their everyday life more independently. In this paper, we discuss RFID-inspired wireless brain-machine interface systems. We demonstrate that mm-size loop implanted antennas are capable of efficiently coupling to an external transmitting loop antenna through an inductive link. In addition, we focus on wearable antennas based on electrically conductive textiles and threads, and present design guidelines for their use as wearable-antenna conductive elements. Overall, our results constitute an important milestone in the development of wireless brain-machine interface systems, and a new era of wireless body-centric systems.

Developing Integrated MEMS Products for Medical and Industrial Markets

Aims: As the trend in technology is shifting toward smaller and more compact devices with requirements for more accurate measurement systems, new sensors and components enabling this trend are also being broug ht to market. Micro electromechanical sensors (MEMS) and devices utilizing these components are finding new applications in mobile and hand -held devices, mobile robotics and navigation. Inertial sensors have been shown to be subject to a number of differen t error sources such as temperature and integration drifts and other biases mostly caused by the sensitivity of the sensors as well as by external disturbances [1 -5]. However, due to recent advances in MEMS technologies, these errors are better controllabl e. Study Design:This paper describes recent developments in the field of MEMS with proof-of-concept devices for a variety of sensing applications. Our recent research has focused on monitoring of human vital signs and displacement tracking of controlled and free-hand motions. Results: In this study, we demonstrate that current commercial off -the-shelf MEMS based inertial measurement units (IMU) can be used as such with appropriate signal processing both in medical and industrial applications. Conclusion: Our proof-of-concept device has been used in basic human vital signs detection, such as tremor and respiration. Other tests were performed to verify the suitability of the sensor in demanding industrial applications with high accuracy requirements for rota tion and displacement. Original ResearchArticle

Cost-efficient speckle interferometry with plastic optical fiber for unobtrusive monitoring of human vital signs

A cost-efficient plastic optical fiber (POF) system for unobtrusive monitoring of human vital signs is presented. The system is based on speckle interferometry. A laser diode is butt-coupled to the POF whose exit face projects speckle patterns onto a linear optical sensor array. Sequences of acquired speckle images are transformed into one-dimensional signals by using the phase-shifting method. The signals are analyzed by band-pass filtering and a Morlet-wavelet-based multiresolutional approach for the detection of cardiac and respiratory activities, respectively. The system is tested with 10 healthy nonhospitalized persons, lying supine on a mattress with the embedded POF. Experimental results are assessed statistically: precisions of 98.8% ± 1.5% and 97.9% ± 2.3%, sensitivities of 99.4% ± 0.6% and 95.3% ± 3%, and mean delays between interferometric detections and corresponding referential signals of 116.6 ± 55.5 and 1299.2 ± 437.3 ms for the heartbeat and respiration are obtained, respectively.

Compact Millimeter-Wave Sensor for Remote Monitoring of Vital Signs

A compact millimeter-wave (MMW) sensor has been developed for remote monitoring of human vital signs (heart and respiration rate). The low-power homodyne transceiver operating at 94 GHz was assembled by using solid-state active and passive block-type components and can be battery operated. A description of the MMW system front end and the back-end acquisition hardware and software is presented. Representative test case results on the application of various signal processing and data analysis algorithms developed to extract faint physiological signals of interest in presence of strong background interference are provided. Although the laboratory experiments so far have been limited to standoff distances of up to 15 m, the upper limit of the detection range is expected to be higher. In comparison with its microwave counterparts, the MMW system described here provides higher directivity, increased sensitivity, and longer detection range for measuring subtle mechanical displacements associated with heart and respiration functions. The system may be adapted for use in a wide range of standoff sensing applications including for patient health care, structural health monitoring, nondestructive testing, biometric sensing, and remote vibrometry in general.

Copper oxide transistor on copper wire for e-textile

A Cu2O-based field effect transistor was fabricated on Cu wire. Thermal oxidation of Cu forms Cu–Cu2O core-shell structure, where the metal-semiconductor Schottky junction was used as a gate barrier with Pt Ohmic contacts for source and drain. The device was coated with polydimethylsiloxane (PDMS) to protect from contamination and demonstrated as a humidity sensor. The cylindrical structure of the Cu wire and the transistor function enable embedding of simple circuits into textile which can potentially offer smart textile for wearable computing, environmental sensing, and monitoring of human vital signs.

Wearable biosensing: signal processing and communication architectures issues

Long-term monitoring of human vital signs is becoming one of the most important fields of research of biomedical engineering. In order to achieve weeks to months of monitoring, new strategies for sensing, conditioning, processing and communication have to be developed. Several strategies are emerging and show different possible architectures. This paper essentially focuses on issues in wearable biosignal processing and communication architecture currently running at the Swiss Center for Electronics andMicrotechnology (CSEM) in the framework of several European projects.

Telesensor integrated circuits.

Progress in personal computing has recently permitted small research programs to design and simulate application-specific integrated circuits (ASICs). Inexpensive fabrication of silicon chips can then be obtained using chip foundries, and quite complex circuits can be greatly reduced in size with an accompanying increase in certain performance characteristics. Within the past 5 years it has also become possible to design ASICs which can transmit and receive radio signals and which thus may be employed in applications in which wired connections for input and output of signals are not practicable. We are currently developing research-grade prototype ASICs for the monitoring of human vital signs. In this case one or more sensors placed on an ASIC provides a signal to be transmitted a distance of 2-3 meters to a receiver/display unit. The use of ASIC telesensors provides the possibility of wireless monitoring, including long-term monitoring, with inexpensive and unencumbering devices. Their self-contained nature permits a number of potential uses in future biomedical applications as new sensors are devised which are amenable to deployment on silicon.