Human Decellularized Adipose Tissue Research Articles

Manufacturing of a Human Adipose-Derived Hydrogel.

Hydrogels are considered a viable in vitro alternative to monolayer cultures. They provide quintessential characteristics for in vitro studies including biocompatibility, biodegradability, viscoelasticity, hydrophilicity, and low toxicity. Furthermore, many provide necessary extracellular matrix proteins and architecture to support cell growth, proliferation, differentiation, and migration. Synthetic and natural polymer-derived hydrogels both demonstrate positive qualities; however, natural hydrogels have attracted great interest due to their clinical relevancy. In particular, decellularized tissue-derived hydrogels have been identified as a significant resource for tissue engineering applications by mimicking the composition and architecture of their tissue of origin.The use of adipose tissue as a hydrogel has become more prevalent because of limitless resources and accessibility of the tissue itself. Obatala Sciences has established a manufacturing protocol for human decellularized adipose tissue (hDAT) using a series of steps including mechanical disruption, chemical disruption with N-Lauroylsarcosine, and enzymatic digestion with pepsin and hydrochloric acid.

Decellularized adipose tissue matrix-coated and simvastatin-loaded hydroxyapatite microspheres for bone regeneration.

Simvastatin (SIM)-loaded and human decellularized adipose tissue (DAT)-coated porous hydroxyapatite (HAp) microspheres were developed for the first time to investigate their potential on bone regeneration. Microspheres were loaded with SIM and then coated with DAT for modifying SIM release and improving their biological response. HAp microspheres were prepared by water-in-oil emulsion method using camphene (C10 H16 ) as porogen followed by camphene removal by freeze-drying and sintering at 1200°C for 3 h. Sintered HAp microspheres with an average particle size of ~400 µm were porous and spherical in shape. Microspheres were incubated with 1, 2.5, and 5 mg/ml SIM stock solutions for drug loading, and drug loading was determined as 7.5 ± 0.79, 20.41 ± 1.93, and 46.26 ± 0.29 µg SIM/mg microspheres, respectively. SIM loading increased with the increase of the initial SIM loading amount. Faster SIMrelease was observed in DAT-coated microspheres compared to bare counterparts. Higher SaoS-2 cell attachment and proliferation were observed on DAT-coated microspheres. Significantly higher alkaline phosphatase activity of SaoS-2 cells was observed on DAT-coated microspheres containing 0.01 mg/ml SIM than all other groups (p < 0.01). DAT-coated microspheres loaded with SIM at low doses hold promise for bone tissue engineering applications.

Three-dimensional cultivation of human adipose-derived stem cells with human decellularized adipose tissue matrix scaffold promotes diabetic wound healing

Diabetic wounds are a worldwide health problem, with increasing morbidity and risk of amputation. This study investigated a novel application of a human decellularized adipose tissue matrix (hDAM) as a natural 3D scaffold for delivering human adipose-derived stem cells (hASCs) to diabetic wounds. The porous structure, ability to preserve extracellular matrix components, and convenient storage conditions of decellularized hDAM make it a potential clinical wound dressing material. The hASCs cultured in the hDAM scaffold exhibited a fibroblast-like morphology and more evenly distributed cells on both the surface and inside the porous structure of the hDAM scaffold. In addition, the biocompatibility of hDAM enhanced the hASCs proliferation, maintenance of the stemness properties, and release of angiogenic cytokines compared to those under standard culture conditions. Moreover, cell suspensions derived from hASCs cultured in hDAM scaffolds promoted the proliferation and migration of human umbilical vascular endothelial cells, indicating its potential effect in promoting angiogenesis. Furthermore, the potential clinical therapeutic efficacy of the hASC-hDAM composite for diabetic wound healing was evaluated using a full-thickness wound model in diabetic mice. Diabetic rats treated with the hASCs-seeded hDAM scaffold displayed enhanced wound healing efficiency, including an improved blood perfusion volume for wounds, reduced number of inflammatory cells, and enhanced epithelization. This study demonstrated that the 3D model that combined hASCs and an hDAM could accelerate wound healing and might hold potential for clinical application to enhance diabetic wound healing and regeneration.

Development and characterization of matrix-derived microcarriers from decellularized tissues using electrospraying techniques.

Stirred bioreactor systems integrating microcarriers represent a promising approach for therapeutic cell manufacturing. While a variety of microcarriers are commercially available, current options do not integrate the tissue-specific composition of the extracellular matrix (ECM), which can play critical roles in directing cell function. The current study sought to generate microcarriers comprised exclusively of ECM from multiple tissue sources. More specifically, porcine decellularized dermis, porcine decellularized myocardium, and human decellularized adipose tissue were digested with α-amylase to obtain ECM suspensions that could be electrosprayed into liquid nitrogen to generate 3D microcarriers that were stable over a range of ECM concentrations without the need for chemical crosslinking or other additives. Characterization studies confirmed that all three microcarrier types had similar soft and compliant mechanical properties and were of a similar size range, but that their composition varied depending on the native tissue source. In vivo testing in immunocompetent mice revealed that the microcarriers integrated into the host tissues, supporting the infiltration of host cells including macrophages and endothelial cells at 2 weeks post-implantation. In vitro cell culture studies validated that the novel microcarriers supported the attachment of tissue-specific stromal cell populations under dynamic culture conditions within spinner flasks, with a significant increase in live cell numbers observed over 1week on the dermal- and adipose-derived microcarriers. Overall, the findings demonstrate the versatility of the electrospraying methods and support the further development of the microcarriers as cell culture and delivery platforms.

Quantitative Photothermal Characterization with Bioprinted 3D Complex Tissue Constructs for Early-Stage Breast Cancer Therapy Using Gold Nanorods.

Plasmonic photothermal therapy (PPTT) using gold nanoparticles (AuNPs) has shown great potential for use in selective tumor treatment, because the AuNPs can generate destructive heat preferentially upon irradiation. However, PPTT using AuNPs has not been added to practice, owing to insufficient heating methods and tissue temperature measurement techniques, leading to unreliable and inaccurate treatments. Because the photothermal properties of AuNPs vary with laser power, particle optical density, and tissue depth, the accurate prediction of heat generation is indispensable for clinical treatment. In this report, bioprinted 3D complex tissue constructs comprising processed gel obtained from porcine skin and human decellularized adipose tissue are presented for characterization of the photothermal properties of gold nanorods (AuNRs) having an aspect ratio of 3.7 irradiated by a near-infrared laser. Moreover, an analytical function is suggested for achieving PPTT that can cause thermal damage selectively on early-stage human breast cancer by regulating the heat generation of the AuNRs in the tissue.

Decellularized adipose tissue scaffolds guide hematopoietic differentiation and stimulate vascular regeneration in a hindlimb ischemia model

Cellular therapies to stimulate therapeutic angiogenesis in individuals with critical limb ischemia (CLI) remain under intense investigation. In this context, the efficacy of cell therapy is dependent on the survival, biodistribution, and pro-angiogenic paracrine signaling of the cells transplanted. Hematopoietic progenitor cells (HPC) purified from human umbilical cord blood using high aldehyde dehydrogenase-activity (ALDHhi cells) and expanded ex vivo, represent a heterogeneous mixture of progenitor cells previously shown to support limb revascularization in mouse models of CLI. The objectives of this study were to investigate the utility of bioscaffolds derived from human decellularized adipose tissue (DAT) to guide the differentiation of seeded HPC in vitro and harness the pro-angiogenic capacity of HPC at the site of ischemia after implantation in vivo. Probing whether the DAT scaffolds altered HPC differentiation, label-free quantitative mass spectrometry and flow cytometric phenotype analyses indicated that culturing the HPC on the DAT scaffolds supported their differentiation towards the pro-angiogenic monocyte/macrophage lineage at the expense of megakaryopoiesis. Moreover, implantation of HPC in DAT scaffolds within a unilateral hindlimb ischemia model in NOD/SCID mice increased cell retention at the site of ischemia relative to intramuscular injection, and accelerated the recovery of limb perfusion, improved functional limb use and augmented CD31+ capillary density when compared to DAT implantation alone or saline-injected controls. Collectively, these data indicate that cell-instructive DAT scaffolds can direct therapeutic HPC differentiation towards the monocyte/macrophage lineage and represent a promising delivery platform for improving the efficacy of cell therapies for CLI.

Human decellularized adipose tissue hydrogels as a culture platform for human adipose-derived stem cell delivery.

Adipose-derived stem cells (ADSCs) have been widely researched and used as a drug therapy in many fields like disease treatment and tissue engineering. However, ADSCs are susceptible to the surrounding environment. The emergence of acellular extracellular matrix provides a solution, which can serve as biomaterial scaffold as well as original ecological niche for the stem cells. Therefore, we propose the hypothesis that human decellularized adipose tissues (hDAT) are processed into injectable hydrogels and then mixed evenly with ADSCs. So that the ADSCs embedded-hydrogels could directly carry the stem cells to the appropriate sites. The hDAT hydrogel could provide microenvironmental protection for ADSCs. In this study, we successfully made human decellularized adipose tissue hydrogel (hDAT-gel), which was temperature-sensitive, liquid at 4°C and semi-solid at 37°C. When the ADSCs were embedded in hDAT-gel, they survived well and continued to grow well in layers. When the pre-gel containing ADSCs was injected subcutaneously into nude mice, the sample results after 15 min showed gelation occurred in situ. These results suggested that hDAT-gel could provide a culture platform for ADSCs delivery.

Injectable human decellularized adipose tissue hydrogel containing stem cells enhances wound healing in mouse

Acellular matrix hydrogels have been extracted from a variety of tissues currently, which have been widely exploited for various applications. What is more, hydrogels derived from porcine myocardium matrix have entered clinical trials (NCT02305602) for the prevention and treatment of heart failure post-myocardial infarction. However, few scholars have analyzed the adipose acellular matrix hydrogels. Here we report an injectable hydrogel entirely from human decellularized adipose tissue (hDAT-gel) and explore the innovative application in wound healing combining with human adipose-derived stem cells (hASCs). We postulated that hDAT-gel could provide hASCs with a 3D vivo-like ecological niche necessary to enhance stem cell engraftment, survival as well as differentiation to improve the quality of wound healing. Consequently, a temperature-responsive hDAT-gel was successfully produced, which could undergo sol-gel transition at 37℃. In vitro, hASCs could survive and proliferate well in the self-assembled gel which retained important protein components. In vivo, when the hASCs-embedded hDAT-gels were injected into the full-thickness cutaneous wound of mice, the wound healed rapidly through obvious neovascularization especially within 7 days. Our study demonstrated that the hDAT-gel containing hASCs could accelerate the vascularization of the wound site and speed up the wound healing to some extent. It is a promising injectable biomaterial for stem cell delivery and wound repair.

Culture on Tissue-Specific Coatings Derived from α-Amylase-Digested Decellularized Adipose Tissue Enhances the Proliferation and Adipogenic Differentiation of Human Adipose-Derived Stromal Cells.

While extracellular matrix (ECM)-derived coatings have the potential to direct the response of cell populations in culture, there is a need to investigate the effects of ECM sourcing and processing on substrate bioactivity. To develop improved cell culture models for studying adipogenesis, the current study examines the proliferation and adipogenic differentiation of human adipose-derived stem/stromal cells (ASCs) on a range of ECM-derived coatings. Human decellularized adipose tissue (DAT) and commercially available bovine tendon collagen (COL) are digested with α-amylase or pepsin to prepare the coatings. Physical characterization demonstrates that α-amylase digestion generates softer, thicker, and more stable coatings, with a fibrous tissue-like ultrastructure that is lost in the pepsin-digested thin films. ASCs cultured on the α-amylase-digested ECM have a more spindle-shaped morphology, and proliferation is significantly enhanced on the α-amylase-digested DAT coatings. Further, the α-amylase-digested DAT provides a more pro-adipogenic microenvironment, based on higher levels of adipogenic gene expression, glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, and perilipin staining. Overall, this study supports α-amylase digestion as a new approach for generating bioactive ECM-derived coatings, and demonstrates tissue-specific bioactivity using adipose-derived ECM to enhance ASC proliferation and adipogenic differentiation.

Matrix composition in 3-D collagenous bioscaffolds modulates the survival and angiogenic phenotype of human chronic wound dermal fibroblasts

There is a substantial need for new strategies to stimulate cutaneous tissue repair in the treatment of chronic wounds. To address this challenge, our team is developing modular biomaterials termed “bead foams”, comprised of porous beads synthesized exclusively of extracellular matrix (ECM) and assembled into a cohesive three-dimensional (3-D) network. In the current study, bead foams were fabricated from human decellularized adipose tissue (DAT) or commercially-sourced bovine tendon collagen (COL) to explore the effects of ECM composition on human wound edge dermal fibroblasts (weDF) sourced from chronic wound tissues. The DAT and COL bead foams were shown to be structurally similar, but compositionally distinct, containing different levels of glycosaminoglycan content and collagen types IV, V, and VI. In vitro testing under conditions simulating stresses within the chronic wound microenvironment indicated that weDF survival and angiogenic marker expression were significantly enhanced in the DAT bead foams as compared to the COL bead foams. These findings were corroborated through in vivo assessment in a subcutaneous athymic mouse model. Taken together, the results demonstrate that weDF survival and paracrine function can be modulated by the matrix source applied in the design of ECM-derived scaffolds and that the DAT bead foams hold promise as cell-instructive biological wound dressings. Statement of SignificanceBiological wound dressings derived from the extracellular matrix (ECM) can be designed to promote the establishment of a more permissive microenvironment for healing in the treatment of chronic wounds. In the current work, we developed modular biomaterials comprised of fused networks of porous ECM-derived beads fabricated from human decellularized adipose tissue (DAT) or commercially-available bovine collagen. The bioscaffolds were designed to be structurally similar to provide a platform for investigating the effects of ECM composition on human dermal fibroblasts isolated from chronic wounds. Testing in in vitro and in vivo models demonstrated that cell survival and pro-angiogenic function were enhanced in the adipose-derived bioscaffolds, which contained higher levels of glycosaminoglycans and collagen types IV, V, and VI. Our findings support that the complex matrix composition within DAT can induce a more pro-regenerative cellular response for applications in wound healing.

Biocompatibility of injectable hydrogel from decellularized human adipose tissue in vitro and in vivo.

Adipose tissue engineering is considered as a promising treatment for repairing soft tissue defects. The decellularized extracellular matrix (ECM) is becoming the research focus in tissue engineering for its tissue specificity. In this study, the human adipose tissue liposucted from healthy people were decellularized by a series of mechanical, chemical, and enzymatic methods. The components of cell and lipid were effectively removed, whereas the collagens and other ingredients in adipose tissue were retained in the human decellularized adipose tissue (hDAT). Then the extracted hDAT was further fabricated into injectable hydrogel, which could be self-assembled to form gel under certain condition. The hDAT hydrogel was nontoxic to human adipose-derived stem cells (ADSCs) and could spontaneously induce adipogenic differentiation in vitro. It was highly biocompatible and could not cause inflammation and rejection after being implanted subcutaneously. The hDAT hydrogel developed in this study will be one of the available choices for soft tissue enlargement and cosmetic fillers because of its noninvasive in collection and implantation process. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1684-1694, 2019.

Collagenase treatment enhances proteomic coverage of low-abundance proteins in decellularized matrix bioscaffolds.

There is great interest in the application of advanced proteomic techniques to characterize decellularized tissues in order to develop a deeper understanding of the effects of the complex extracellular matrix (ECM) composition on the cellular response to these pro-regenerative bioscaffolds. However, the identification of proteins in ECM-derived bioscaffolds is hindered by the high abundance of collagen in the samples, which can interfere with the detection of lower-abundance constituents that may be important regulators of cell function. To address this limitation, we developed a novel multi-enzyme digestion approach using treatment with a highly-purified collagenase derived from Clostridium Histolyticum to selectively deplete collagen from ECM-derived protein extracts, reducing its relative abundance from up to 90% to below 10%. Moreover, we applied this new method to characterize the proteome of human decellularized adipose tissue (DAT), human decellularized cancellous bone (DCB), and commercially-available bovine tendon collagen (BTC). We successfully demonstrated with all three sources that collagenase treatment increased the depth of detection and enabled the identification of a variety of signaling proteins that were masked by collagen in standard digestion protocols with trypsin/LysC, increasing the number of proteins identified in the DAT by ∼2.2 fold, the DCB by ∼1.3 fold, and the BTC by ∼1.6 fold. In addition, quantitative proteomics using label-free quantification demonstrated that the DAT and DCB extracts were compositionally distinct, and identified a number of adipogenic and osteogenic proteins that were consistently more highly expressed in the DAT and DCB respectively. Overall, we have developed a new processing method that may be applied in advanced mass spectrometry studies to improve the high-throughput proteomic characterization of bioscaffolds derived from mammalian tissues. Further, our study provides new insight into the complex ECM composition of two human decellularized tissues of interest as cell-instructive platforms for regenerative medicine.

Decellularized adipose tissue microcarriers as a dynamic culture platform for human adipose-derived stem/stromal cell expansion.

With the goal of designing a clinically-relevant expansion strategy for human adipose-derived stem/stromal cells (ASCs), methods were developed to synthesize porous microcarriers derived purely from human decellularized adipose tissue (DAT). An electrospraying approach was applied to generate spherical DAT microcarriers with an average diameter of 428±41μm, which were soft, compliant, and stable in long-term culture without chemical crosslinking. Human ASCs demonstrated enhanced proliferation on the DAT microcarriers relative to commercially-sourced Cultispher-S microcarriers within a spinner culture system over 1 month. ASC immunophenotype was maintained post expansion, with a trend for reduced expression of the cell adhesion receptors CD73, CD105, and CD29 under dynamic conditions. Upregulation of the early lineage-specific genes PPARγ, LPL, and COMP was observed in the ASCs expanded on the DAT microcarriers, but the cells retained their multilineage differentiation capacity. Comparison of adipogenic and osteogenic differentiation in 2-D cultures prepared with ASCs pre-expanded on the DAT microcarriers or Cultispher-S microcarriers revealed similar adipogenic and enhanced osteogenic marker expression in the DAT microcarrier group, which had undergone a higher population fold change. Further, histological staining results suggested a more homogeneous differentiation response in the ASCs expanded on the DAT microcarriers as compared to either Cultispher-S microcarriers or tissue culture polystyrene. A pilot chondrogenesis study revealed higher levels of chondrogenic gene and protein expression in the ASCs expanded on the DAT microcarriers relative to all other groups, including the baseline controls. Overall, this study demonstrates the promise of applying dynamic culture with tissue-specific DAT microcarriers as a means of deriving regenerative cell populations.

Preparation, Characterization, and Clinical Implications of Human Decellularized Adipose Tissue Extracellular Matrix (hDAM): A Comprehensive Review.

Fat grafting is commonly employed by plastic and reconstructive surgeons to address contour abnormalities and soft-tissue defects; however, because retention rates and thus volume filling effects are unpredictable, there is a search for new and innovative approaches. Initial studies on the use of human decellularized adipose tissue extracellular matrix (hDAM) show promise for its use not only in tissue engineering, but also in fat grafting. In this review, we examine and analyze the literature for the preparation, characterization, and use of hDAM and its derivatives in tissue engineering and plastic surgery applications. All studies reviewed involve physical, chemical, and/or biological treatment stages for the preparation of hDAM; however a distinction should be made between detergent and nondetergent-based processing, the latter of which appears to preserve the native integrity of the hDAM while most-efficiently achieving complete decellularization. Methods of hDAM characterization vary among groups and included simple and immunohistochemical staining, biochemical assays, 3-dimensional (3D) imaging, and mechano-stress testing, all of which are necessary to achieve a comprehensive description of this novel tissue. Finally, we examine the various preclinical models utilized to optimize hDAM performance, which primarily include the addition of adipose-derived stem cells or cross-linking agents. Overall, hDAM appears to be a promising adjunct in fat-grafting applications or even possibly as a stand-alone soft-tissue filler with off-the-shelf potential for commercial applications.

Human decellularized adipose tissue scaffold as a model for breast cancer cell growth and drug treatments

Human adipose tissue extracellular matrix, derived through decellularization processing, has been shown to provide a biomimetic microenvironment for adipose tissue regeneration. This study reports the use of human adipose tissue-derived extracellular matrix (hDAM) scaffolds as a three-dimensional cell culturing system for the investigation of breast cancer growth and drug treatments. The hDAM scaffolds have similar extracellular matrix composition to the microenvironment of breast tissues. Breast cancer cells were cultured in hDAM scaffolds, and cell proliferation, migration, morphology, and drug responses were investigated. The growth profiles of multiple breast cancer cell lines cultured in hDAM scaffolds differed from the growth of those cultured on two-dimensional surfaces and more closely resembled the growth of xenografts. hDAM-cultured breast cancer cells also differed from those cultured on two-dimensional surfaces in terms of cell morphology, migration, expression of adhesion molecules, and sensitivity to drug treatment. Our results demonstrated that the hDAM system provides breast cancer cells with a biomimetic microenvironment in vitro that more closely mimics the in vivo microenvironment than existing two-dimensional and Matrigel three-dimensional cultures do, and thus can provide vital information for the characterization of cancer cells and screening of cancer therapeutics.

Porous decellularized adipose tissue foams for soft tissue regeneration

To design tissue-specific bioscaffolds with well-defined properties and 3-D architecture, methods were developed for preparing porous foams from enzyme-solubilized human decellularized adipose tissue (DAT). Additionally, a technique was established for fabricating “bead foams” comprised of interconnected networks of porous DAT beads fused through a controlled freeze-thawing and lyophilization procedure. In characterization studies, the foams were stable without the need for chemical crosslinking, with properties that could be tuned by controlling the protein concentration and freezing rate during synthesis. Adipogenic differentiation studies with human adipose-derived stem cells (ASCs) suggested that stiffness influenced ASC adipogenesis on the foams. In support of our previous work with DAT scaffolds and microcarriers, the DAT foams and bead foams strongly supported adipogenesis and were also adipo-inductive, as demonstrated by glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, endpoint RT-PCR analysis of adipogenic gene expression, and intracellular lipid accumulation. Adipogenic differentiation was enhanced on the microporous DAT foams, potentially due to increased cell–cell interactions in this group. In vivo assessment in a subcutaneous Wistar rat model demonstrated that the DAT bioscaffolds were well tolerated and integrated into the host tissues, supporting angiogenesis and adipogenesis. The DAT-based foams induced a strong angiogenic response, promoted inflammatory cell migration and gradually resorbed over the course of 12 weeks, demonstrating potential as scaffolds for wound healing and soft tissue regeneration.

The performance of decellularized adipose tissue microcarriers as an inductive substrate for human adipose-derived stem cells

With the aim of developing a clinically-translatable cell expansion and delivery vehicle for adipose tissue engineering, the adipogenic differentiation of human adipose-derived stem cells (ASCs) was investigated on microcarriers fabricated from human decellularized adipose tissue (DAT). ASCs seeded on the DAT microcarriers and cultured in adipogenic differentiation medium within a low-shear spinner culture system demonstrated high levels of adipogenic differentiation, as measured by the expression of adipogenic genes, glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, and intracellular lipid accumulation. In contrast, gelatin microcarrier controls did not demonstrate significant adipogenesis, emphasizing the role of the native matrix in mediating ASC differentiation. Interestingly, ASCs cultured on the DAT microcarriers in proliferation medium expressed elevated levels of the adipogenic markers, suggesting that the DAT provided an adipo-inductive substrate for the human ASCs. In vivo testing of the DAT and gelatin microcarriers in a subcutaneous Wistar rat model confirmed injectability and demonstrated stable volume retention over 28 days. Under histological analysis, the DAT microcarriers demonstrated no evidence of immunogenicity or cytotoxicity, with the DAT supporting cellular infiltration and tissue remodeling. Pre-seeding the DAT microcarriers with allogenic rat ASCs enhanced cellularity and angiogenesis within the implant region.