Human Cadaveric Knee Joints Research Articles

Centralization reduces meniscal extrusion, improves joint mechanics and functional outcomes in patients undergoing meniscus surgery: A systematic review and meta-analysis.

To perform a systematic review and meta-analysis of the existing literature on meniscal centralisation procedures, analysing its impact on meniscal extrusion, joint biomechanics and clinical and radiological outcome measures. The Cochrane Controlled Register of Trials, PubMed (MEDLINE) and Embase were used to perform a systematic review using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria. Biomechanical studies on healthy animal or human cadaveric knee joints that assessed meniscal extrusion or tibiofemoral contact mechanics (contact area and pressure) following centralization for meniscal pathologies were included. For clinical studies, those that prospectively or retrospectively assessed patient-reported outcome measures (PROMs), postoperative knee motion, complications and radiological extrusion following centralization for meniscal pathologies were included. Fifteen studies were included in the analysis, comprising eight biomechanical, six clinical and one both. There were 92 knee specimens for biomechanical testing, of which 40 were human cadaveric and 52 porcine models. Biomechanical data revealed centralization to be commonly performed for posterior meniscal root tears and significantly reduced extrusion and contact pressure whilst improving contact area following a tear (p < 0.00001).Centralization restored extrusion to that of the native knee at all flexion angles described (0-90°, p = 0.25) and, compared to the torn state, brought tibiofemoral contact mechanics 3.2-5.0 times closer to the native state. Clinical data showed that 158 patients underwent centralization for extrusion. It improved postoperative Knee Injury and Osteoarthritis Outcome score (KOOS) (p = 0.006) and Lysholm scores (p < 0.00001) at 25.0 months, maintained extrusion reduction at 17.1 months (p < 0.00001) and preserved knee motion. Centralisation for various meniscal injuries associated with extrusion can reduce meniscal extrusion and improve joint biomechanics, along with clinical and radiological outcomes. Existing evidence is still scarce and exhibits a notable amount of methodological heterogeneity. Systematic review of Level IV evidence.

Measurement of T1ρ dispersion with compressed sensing and magnetization prepared radial balanced steady-state free precessionin spontaneous human osteoarthritis.

To assess the potential for accelerating continuous-wave (CW) T1ρ dispersion measurement with compressed sensing approach via studying the effect that the data reduction has on the ability to detect differences between intact and degenerated articular cartilage with different spin-lock amplitudes and to assess quantitative bias due to acceleration. Osteochondral plugs (n = 27, 4 mm diameter) from femur (n = 14) and tibia (n = 13) regions from human cadaver knee joints were obtained from commercial biobank (Science Care, USA) under Ethical permission 134/2015. MRI of specimens was performed at 9.4T with magnetization prepared radial balanced SSFP (bSSFP) readout sequence, and the CWT1ρ relaxation time maps were computed from the measured data. The relaxation time maps were evaluated in the cartilage zones for different acceleration factors. For reference, Osteoarthritis Research Society International (OARSI) grading and biomechanical measurements were performed and correlated with the MRI findings. Four-fold acceleration of CWT1ρ dispersion measurement by compressed sensing approach was feasible without meaningful loss in the sensitivity to osteoarthritic (OA) changes within the articular cartilage. Differences were significant between intact and OA groups in the superficial and transitional zones, and CWT1ρ correlated moderately with the reference measurements (0.3 < r < 0.7). CWT1ρ was able to differentiate between intact and OA cartilage even with four-fold acceleration. This indicates that acceleration of CWT1ρ dispersion measurement by compressed sensing approach is feasible with negligible loss in the sensitivity to osteoarthritic changes in articular cartilage.

Two for One-Combined Morphologic and Quantitative Knee Joint MRI Using a Versatile Turbo Spin-Echo Platform.

Quantitative MRI techniques such as T2 and T1ρ mapping are beneficial in evaluating knee joint pathologies; however, long acquisition times limit their clinical adoption. MIXTURE (Multi-Interleaved X-prepared Turbo Spin-Echo with IntUitive RElaxometry) provides a versatile turbo spin-echo (TSE) platform for simultaneous morphologic and quantitative joint imaging. Two MIXTURE sequences were designed along clinical requirements: "MIX1", combining proton density (PD)-weighted fat-saturated (FS) images and T2 mapping (acquisition time: 4:59 min), and "MIX2", combining T1-weighted images and T1ρ mapping (6:38 min). MIXTURE sequences and their reference 2D and 3D TSE counterparts were acquired from ten human cadaveric knee joints at 3.0 T. Contrast, contrast-to-noise ratios, and coefficients of variation were comparatively evaluated using parametric tests. Clinical radiologists (n = 3) assessed diagnostic quality as a function of sequence and anatomic structure using five-point Likert scales and ordinal regression, with a significance level of α = 0.01. MIX1 and MIX2 had at least equal diagnostic quality compared to reference sequences of the same image weighting. Contrast, contrast-to-noise ratios, and coefficients of variation were largely similar for the PD-weighted FS and T1-weighted images. In clinically feasible scan times, MIXTURE sequences yield morphologic, TSE-based images of diagnostic quality and quantitative parameter maps with additional insights on soft tissue composition and ultrastructure.

Impact of hyaluronic acid injection on the knee joint friction

PurposeThe purpose of this in vitro study was to investigate whether or not hyaluronic acid supplementation improves knee joint friction during osteoarthritis progression under gait-like loading conditions.MethodsTwelve human cadaveric knee joints were equally divided into mild and moderate osteoarthritic groups. After initial conservative preparation, a passive pendulum setup was used to test the whole joints under gait-like conditions before and after hyaluronic acid supplementation. The friction-related damping properties given by the coefficient of friction µ and the damping coefficient c (in kg m2/s) were calculated from the decaying flexion–extension motion of the knee. Subsequently, tibial and femoral cartilage and meniscus samples were extracted from the joints and tested in an established dynamic pin-on-plate tribometer using synthetic synovial fluid followed by synthetic synovial fluid supplemented with hyaluronic acid as lubricant. Friction was quantified by calculating the coefficient of friction.ResultsIn the pendulum tests, the moderate OA group indicated significantly lower c0 values (p < 0.05) under stance phase conditions and significantly lower µ0 (p = 0.01) values under swing phase conditions. No degeneration-related statistical differences were found for µend or cend. Friction was not significantly different (p > 0.05) with regard to mild and moderate osteoarthritis in the pin-on-plate tests. Additionally, hyaluronic acid did not affect friction in both, the pendulum (p > 0.05) and pin-on-plate friction tests (p > 0.05).ConclusionThe results of this in vitro study suggested that the friction of cadaveric knee joint tissues does not increase with progressing degeneration. Moreover, hyaluronic acid viscosupplementation does not lead to an initial decrease in knee joint friction.

Free-floating medial meniscus implant kinematics do not change after simulation of medial open-wedge high tibial osteotomy and notchplasty

PurposeThe purpose of this in-vitro study was to examine the kinematics of an artificial, free-floating medial meniscus replacement device under dynamic loading situations and different knee joint states.MethodsA dynamic knee simulator was used to perform dynamic loading exercises on three neutrally aligned and three 10° valgus aligned (simulating a medial openwedge high tibial osteotomy - MOWHTO) left human cadaveric knee joints. The knee joints were tested in three states (intact, conventional notchplasty, extended notchplasty) while 11 randomised exercises were simulated (jump landing, squatting, tibial rotation and axial ground impacts at 10°, 30° and 60° knee joint flexion) to investigate the knee joint and implant kinematics by means of rigidly attached reflective marker sets and an according motion analysis.ResultsThe maximum implant translation relative to the tibial plateau was < 13 mm and the maximum implant rotation was < 19° for all exercises. Both, the notchplasties and the valgus knee alignment did not affect the device kinematics.ConclusionsThe results of the present in-vitro study showed that the non-anchored free-floating device remains within the medial knee joint gap under challenging dynamic loading situations without indicating any luxation tendencies. This also provides initial benchtop evidence that the device offers suitable stability and kinematic behaviour to be considered a potential alternative to meniscus allograft transplantation in combination with an MOWHTO, potentially expanding the patient collective in the future.

Micro- and Macroscale Assessment of Posterior Cruciate Ligament Functionality Based on Advanced MRI Techniques.

T2 mapping assesses tissue ultrastructure and composition, yet the association of imaging features and tissue functionality is oftentimes unclear. This study aimed to elucidate this association for the posterior cruciate ligament (PCL) across the micro- and macroscale and as a function of loading. Ten human cadaveric knee joints were imaged using a clinical 3.0T scanner and high-resolution morphologic and T2 mapping sequences. Emulating the posterior drawer test, the joints were imaged in the unloaded (δ0) and loaded (δ1) configurations. For the entire PCL, its subregions, and its osseous insertion sites, loading-induced changes were parameterized as summary statistics and texture variables, i.e., entropy, homogeneity, contrast, and variance. Histology confirmed structural integrity. Statistical analysis was based on parametric and non-parametric tests. Mean PCL length (37.8 ± 1.8 mm [δ0]; 44.0 ± 1.6 mm [δ1] [p < 0.01]), mean T2 (35.5 ± 2.0 ms [δ0]; 37.9 ± 1.3 ms [δ1] [p = 0.01]), and mean contrast values (4.0 ± 0.6 [δ0]; 4.9 ± 0.9 [δ1] [p = 0.01]) increased significantly under loading. Other texture features or ligamentous, osseous, and meniscal structures remained unaltered. Beyond providing normative T2 values across various scales and configurations, this study suggests that ligaments can be imaged morphologically and functionally based on joint loading and advanced MRI acquisition and post-processing techniques to assess ligament integrity and functionality in variable diagnostic contexts.

In-Situ Cartilage Functionality Assessment Based on Advanced MRI Techniques and Precise Compartmental Knee Joint Loading through Varus and Valgus Stress.

Stress MRI brings together mechanical loading and MRI in the functional assessment of cartilage and meniscus, yet lacks basic scientific validation. This study assessed the response-to-loading patterns of cartilage and meniscus incurred by standardized compartmental varus and valgus loading of the human knee joint. Eight human cadaveric knee joints underwent imaging by morphologic (i.e., proton density-weighted fat-saturated and 3D water-selective) and quantitative (i.e., T1ρ and T2 mapping) sequences, both unloaded and loaded to 73.5 N, 147.1 N, and 220.6 N of compartmental pressurization. After manual segmentation of cartilage and meniscus, morphometric measures and T2 and T1ρ relaxation times were quantified. CT-based analysis of joint alignment and histologic and biomechanical tissue measures served as references. Under loading, we observed significant decreases in cartilage thickness (p < 0.001 (repeated measures ANOVA)) and T1ρ relaxation times (p = 0.001; medial meniscus, lateral tibia; (Friedman test)), significant increases in T2 relaxation times (p ≤ 0.004; medial femur, lateral tibia; (Friedman test)), and adaptive joint motion. In conclusion, varus and valgus stress MRI induces meaningful changes in cartilage and meniscus secondary to compartmental loading that may be assessed by cartilage morphometric measures as well as T2 and T1ρ mapping as imaging surrogates of tissue functionality.

Osteoarthritis-Related Degeneration Alters the Biomechanical Properties of Human Menisci Before the Articular Cartilage.

An exact understanding of the interplay between the articulating tissues of the knee joint in relation to the osteoarthritis (OA)-related degeneration process is of considerable interest. Therefore, the aim of the present study was to characterize the biomechanical properties of mildly and severely degenerated human knee joints, including their menisci and tibial and femoral articular cartilage (AC) surfaces. A spatial biomechanical mapping of the articulating knee joint surfaces of 12 mildly and 12 severely degenerated human cadaveric knee joints was assessed using a multiaxial mechanical testing machine. To do so, indentation stress relaxation tests were combined with thickness and water content measurements at the lateral and medial menisci and the AC of the tibial plateau and femoral condyles to calculate the instantaneous modulus (IM), relaxation modulus, relaxation percentage, maximum applied force during the indentation, and the water content. With progressing joint degeneration, we found an increase in the lateral and the medial meniscal instantaneous moduli (p < 0.02), relaxation moduli (p < 0.01), and maximum applied forces (p < 0.01), while for the underlying tibial AC, the IM (p = 0.01) and maximum applied force (p < 0.01) decreased only at the medial compartment. Degeneration had no influence on the relaxation percentage of the soft tissues. While the water content of the menisci did not change with progressing degeneration, the severely degenerated tibial AC contained more water (p < 0.04) compared to the mildly degenerated tibial cartilage. The results of this study indicate that degeneration-related (bio-)mechanical changes seem likely to be first detectable in the menisci before the articular knee joint cartilage is affected. Should these findings be further reinforced by structural and imaging analyses, the treatment and diagnostic paradigms of OA might be modified, focusing on the early detection of meniscal degeneration and its respective treatment, with the final aim to delay osteoarthritis onset.

Ultrashort echo time adiabatic T1ρ (UTE-Adiab-T1ρ) is sensitive to human cadaveric knee joint deformation induced by mechanical loading and unloading

PurposeThe development of ultrashort echo time (UTE) MRI sequences has led to improved imaging of tissues with short T2 relaxation times, such as the deep layer cartilage and meniscus. UTE combined with adiabatic T1ρ preparation (UTE-Adiab-T1ρ) is an MRI measure with low sensitivity to the magic angle effect. This study aimed to investigate the sensitivity of UTE-Adiab-T1ρ to mechanical load-induced deformations in the tibiofemoral cartilage and meniscus of human cadaveric knee joints. MethodsEight knee joints from young (42 ± 12 years at death) donors were evaluated on a 3 T scanner using the UTE-Adiab-T1ρ sequence under four sequential loading conditions: load = 0 N (Load0), load = 300 N (Load1), load = 500 N (Load2), and load = 0 N (Unload). UTE-Adiab-T1ρ was measured in the meniscus (M), femoral articular cartilage (FAC), tibial articular cartilage (TAC), articular cartilage regions uncovered by meniscus (AC-UC), and articular cartilage regions covered by meniscus (AC-MC) within region of interests (ROIs) manually selected by an experienced MR scientist. The Kruskal–Wallis test, with corrected significance level for multiple comparisons, was used to examine the UTE-Adiab-T1ρ differences between different loading conditions. ResultsUTE-Adiab-T1ρ decreased in all grouped ROIs under both Load1 and Load2 conditions (−18.7% and − 16.9% for M, −18.8% and − 12.6% for FAC, −21.4% and − 10.7% for TAC, −26.2% and − 13.9% for AC-UC, and − 16.9% and − 10.7% for AC-MC). After unloading, average UTE-Adiab-T1ρ increased across all ROIs and within a lower range compared with the average UTE-Adiab-T1ρ decreases induced by the two previous loading conditions. The loading-induced differences were statistically non-significant. ConclusionsWhile UTE-Adiab-T1ρ reduction by loading is likely an indication of tissue deformation, the increase of UTE-Adiab-T1ρ within a lower range by unloading implies partial tissue restoration. This study highlights the UTE-Adiab-T1ρ technique as an imaging marker of tissue function for detecting deformation patterns under loading.

Patellar bone stock after extra-articular knee resection preserving extensor mechanism: A cadaveric study.

This study aimed to evaluate the thickness of the remaining patellar bone stock following extra-articular knee resection (EKR) preserving the extensor mechanism in human cadaveric knee joints. A total of 14 human cadaveric knee joints (8 men and 2 women) were dissected, and the patellar thickness from the joint capsule insertion to the anterior cortex of the patella was measured using an electronic caliper. The mean age of the cadavers was 37 years (range=28-50). Measurements were performed by an anatomist and an orthopedic surgeon. As the total number of the cadavers was not enough to show the patellar thickness with sampling (sex and age), we endeavored to supplement the content with magnetic resonance images (MRI). Accordingly, the patellar bone thickness was also measured on axial MRI scans of 100 adult and 25 pediatric knees of patients (71 women and 54 men; mean age=36 years; age range=7-67 years) admitted to our hospital in whom meniscal tears were suspected. The rate of specimens with remaining patellar thickness of less than 10 mm after presumed resection was evaluated. The macroscopic measurements in cadavers and MRI measurements in adult knees were compared statistically. The mean thickness of the residual patellar bone of the cadaver dissections following a presumed EKR preserving the extensor mechanism was 8.2 mm (range=3.4-15.8). Additionally, in 71.4% (10/14) of the cadaveric knees, the thickness of residual patellar bone was less than 10 mm. In MRI scans, the average thickness of residual patella after presumed resection was 8.6 mm (range: 3.6-16) in adult knees and 6.9 mm (range: 3.4-10) in pediatric knees, and the residual patellar thickness less than 10 mm after presumed resection was determined in 72% of all MRI scans. Macroscopic measurements in cadaveric knees were statistically similar to MRI scan measurements in adult knees (p=0.765, Mann-Whitney U test). Evidence from this study revealed that the thickness of the remaining patellar bone stock after EKR preserving the extensor mechanism may be low. A preoperative assessment with MRI can guide the surgeon to select the appropriate method for knee resection in order to prevent from the complications of resected patella.

Effects of human articular cartilage constituents on simultaneous diffusion of cationic and nonionic contrast agents.

Contrast‐enhanced computed tomography is an emerging diagnostic technique for osteoarthritis. However, the effects of increased water content, as well as decreased collagen and proteoglycan concentrations due to cartilage degeneration, on the diffusion of cationic and nonionic agents, are not fully understood. We hypothesize that for a cationic agent, these variations increase the diffusion rate while decreasing partition, whereas, for a nonionic agent, these changes increase both the rate of diffusion and partition. Thus, we examine the diffusion of cationic and nonionic contrast agents within degraded tissue in time‐ and depth‐dependent manners. Osteochondral plugs (N = 15, d = 8 mm) were extracted from human cadaver knee joints, immersed in a mixture of cationic CA4+ and nonionic gadoteridol contrast agents, and imaged at multiple time‐points, using the dual‐contrast method. Water content, and collagen and proteoglycan concentrations were determined using lyophilization, infrared spectroscopy, and digital densitometry, respectively. Superficial to mid (0%‐60% depth) cartilage CA4+ partitions correlated with water content (R < −0.521, P < .05), whereas in deeper (40%‐100%) cartilage, CA4+ correlated only with proteoglycans (R > 0.671, P < .01). Gadoteridol partition correlated inversely with collagen concentration (0%‐100%, R < −0.514, P < .05). Cartilage degeneration substantially increased the time for CA4+ compared with healthy tissue (248 ± 171 vs 175 ± 95 minute) to reach the bone‐cartilage interface, whereas for gadoteridol the time (111 ± 63 vs 179 ± 163 minute) decreased. The work clarifies the diffusion mechanisms of two different contrast agents and presents depth and time‐dependent effects resulting from articular cartilage constituents. The results will inform the development of new contrast agents and optimal timing between agent administration and joint imaging.

Rapid single scan ramped hybrid-encoding for bicomponent T2* mapping in a human knee joint: A feasibility study.

The purpose of this study is to determine the feasibility of using a single scan ramped hybrid-encoding (RHE) method for rapid bicomponent T2* analysis of the human knee joint. The proposed method utilizes RHE to acquire ultrashort echo time (UTE) and subsequent gradient echo images at 16 different echo times ranging between 40 μs and 30 ms in a single scan. In the proposed RHE technique, UTE imaging was followed by acquisition of 14 gradient recalled echo images, where an additional UTE image was obtained within the first readout by oversampling single point imaging (SPI) encoding. The single scan RHE method with a 9-minute scan time was performed on human cadaveric knee joints from six donors and in vivo knee joints from four healthy volunteers at 3 T. A bicomponent signal model was used to characterize the short T2* and long T2* water components. Mean bicomponent T2* parameters for patellar tendon, anterior cruciate ligament (ACL), posterior cruciate ligament (PCL) and meniscus were calculated. In the experimental results, the RHE technique provided bicomponent T2* parameter estimations of tendon, ACL, PCL and meniscus, which were similar to previously reported values in the literature. In conclusion, the proposed single scan RHE technique provides rapid bicomponent T2* analysis of the human knee joint with a total scan time of less than 9 minutes.

Comparison of articular exposure through extended lateral approaches to the tibial plateau

Aims and Objectives:Comminuted lateral tibial plateau fractures pose a challenge to surgeons, resulting in non-anatomical reductions in 70-89% of all cases. Anatomical reconstruction requires the direct visualization of the joint after a fragment reduction, which is impaired using the common anterolateral approach. Although numerous lateral extended approaches are described, there is currently no data on which approach provides better visibility of the posterolateral tibial plateau. The aim of this study was to evaluate, which parts of the tibial plateau can be visualized with the use of the lateral femoral epicondyle osteotomy or the fibula osteotomy? Further, the study investigated wether the combined osteotomy of the femoral footprints of the lateral collateral ligament (LCL) and popliteus tendon (PLT) provide better access to the posterolateral joint surface than the isolated osteotomy of the femoral LCL footprint or the fibula osteotomy?Materials and Methods:Extended lateral (femoral or fibular LCL osteotomy) and posterolateral (additional femoral osteotomy of the PLT tendon) approaches were performed on twelve human cadaver knee joints. After preparing of each surgical approach, the visible joint surface was marked with diathermy. The tibial plateau was disarticulated and the markings were measured digitally with open-source processing software. Differences in mean values were tested with a paired t-test (p < 0.05).Results:The greatest articular exposition was realized by the fibula osteotomy (1011.52 ± 227.05 mm2 [86.64 ± 4.84%] compared to either osteotomy of LCL and PLT (p = 0.036) or LCL alone (p<0.001). The lateral femoral epicondyle osteotomy of the LCL including the PLT (937.45 ± 237.84 mm2 [80.29 ± 8.25 %]) exposed a significantly larger articular surface of the lateral tibial plateau than without the PLT (755.71 ± 183.06 mm2 [64.73 ± 6.51 %], p < 0.001).Conclusion:The fibula osteotomy provides the greatest articular visibility of the lateral tibial plateau compared to the lateral epicondyle osteotomy of the femoral LCL and PLT attachments. This small benefit should be critically balanced against the considerably greater soft tissue damage caused by the fibula osteotomy. The lateral femoral epicondyle osteotomy including the LCL and PLT increases lateral articular visualization without risk to neurovascular or posterolateral soft tissue structures and represents an important extended approach to treat comminuted lateral plateau fractures.

Biomechanical comparison of a 3.5 mm anterior locking plate to cannulated screws with anterior tension band wiring in comminuted patellar fractures

Purpose: To date, surgically treated multifragmentary patellar fractures are still associated with high rates of complications, such as i.e. secondary fracture displacement. Osteosynthesis is most frequently performed with screws and cerclages. To increase primary stability, locking plates have been introduced. However, there is still a lack of biomechanical data supporting the superiority of plate fixation compared to screw fixation with cerclages in these cases. The goal of the present study was to conduct biomechanical comparison of these two techniques under dynamic loading conditions. Methods: A standardized 34-C3 fracture was created in eight pairs of human cadaveric knee joints. Following a randomization protocol, they were fixed with a 3.5 mm anterior locking plate (LP) or cannulated screws with anterior tension band wiring (hybrid osteosynthesis, HO).Subsequently, all constructs were tested for 100 cycles from 90° of knee-flexion to full extension by applying a pulling force to the quadriceps tendon. Outcome parameters were fracture displacement after one cycle, after 100 cycles and implant loosening. Failure was defined as fracture displacement > 2 mm. Results: Biomechanical testing showed significantly less fracture displacement following LP compared to HO both after the first (p = 0.042) and after 100 cycles (p = 0.025). The difference in loosening was significant as well (p = 0.017). Following HO, 5/8 constructs failed during cyclic loading. There was no failure in the LP group. In the HO group, loosening correlated with bone mineral density (R = - 0.857) which was not observed in the LP group (R = - 0.429). Conclusion: Anterior locking plate osteosynthesis of comminuted patellar fractures biomechanically provides better primary stability compared to cannulated screws with anterior tension band wiring.

Meniscal Replacement With a Silk Fibroin Scaffold Reduces Contact Stresses in the Human Knee.

ABSTRACTThe aim of the current study was to verify if a previously developed silk fibroin scaffold for meniscal replacement is able to restore the physiological distribution of contact pressure (CP) over the articulating surfaces in the human knee joint, thereby reducing peak loads occurring after partial meniscectomy. The pressure distribution on the medial tibial articular surface of seven human cadaveric knee joints was analysed under continuous flexion–extension movements and under physiological loads up to 2,500 N at different flexion angles. Contact area (CA), maximum tibiofemoral CP, maximum pressure under the meniscus and the pressure distribution were analysed for the intact meniscus, after partial meniscectomy as well as after partial medial meniscal replacement using the silk fibroin scaffold. Implantation of the silk fibroin scaffold considerably improved tibiofemoral contact mechanics after partial medial meniscectomy. While the reduced CA after meniscectomy was not fully restored by the silk fibroin scaffold, clinically relevant peak pressures on the articular cartilage surface occurring after partial meniscectomy were significantly reduced. Nevertheless, at high flexion angles static testing demonstrated that normal pressure distribution comparable to the intact meniscus could not be fully achieved. The current study demonstrates that the silk fibroin implant possesses attributes that significantly improve tibiofemoral CPs within the knee joint following partial meniscectomy. However, the failure to fully recapitulate the CAs and pressures observed in the intact meniscus, particularly at high flexion angles, indicates that the implant's biomechanical properties may require further improvement to completely restore tibiofemoral contact mechanics. © 2019 The Authors. Journal of Orthopaedic Research ® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 37:2583–2592, 2019

Near-infrared spectroscopy enables quantitative evaluation of human cartilage biomechanical properties during arthroscopy

To investigate the feasibility of near-infrared (NIR) spectroscopy (NIRS) for evaluation of human articular cartilage biomechanical properties during arthroscopy. A novel arthroscopic NIRS probe designed in our research group was utilized by an experienced orthopedic surgeon to measure NIR spectra from articular cartilage of human cadaver knee joints (ex vivo, n=18) at several measurement locations during an arthroscopic surgery. Osteochondral samples (n=265) were extracted from the measurement sites for reference analysis. NIR spectra were remeasured in a controlled laboratory environment (invitro), after which the corresponding cartilage thickness and biomechanical properties were determined. Hybrid multivariate regression models based on principal component analysis and linear mixed effects modeling (PCA-LME) were utilized to relate cartilage invitro spectra and biomechanical properties, as well as to account for the spatial dependency. Additionally, a k-nearest neighbors (kNN) classifier was employed to reject outlying exvivo NIR spectra resulting from a non-optimal probe-cartilage contact. Model performance was evaluated for both invitro and exvivo NIR spectra via Spearman's rank correlation (ρ) and the ratio of performance to interquartile range (RPIQ). Regression models accurately predicted cartilage thickness and biomechanical properties from invitro NIR spectra (Model: 0.77 ≤ ρ≤0.87, 2.03≤RPIQ ≤ 3.0; Validation: 0.74 ≤ ρ≤0.84, 1.87≤RPIQ ≤2.90). When predicting cartilage properties from exvivo NIR spectra (0.33 ≤ ρ≤0.57 and 1.02≤RPIQ ≤2.14), a kNN classifier enhanced the accuracy of predictions (0.52 ≤ ρ ≤ 0.87 and 1.06 ≤ RPIQ ≤ 1.88). Arthroscopic NIRS could substantially enhance identification of damaged cartilage by enabling quantitative evaluation of cartilage biomechanical properties. The results demonstrate the capacity of NIRS in clinical applications.

Release of the medial collateral ligament is mandatory in medial open-wedge high tibial osteotomy.

The purpose of this study was to quantify the effect of clinically relevant open-wedge high tibial osteotomies on medial collateral ligament (MCL) strain and the resultant tibiofemoral contact mechanics during knee extension and 30° knee flexion. Six human cadaveric knee joints were axially loaded (1kN) in knee extension and 30° knee flexion. Strains at the anterior and posterior regions of the MCL were determined using strain gauges. Tibiofemoral contact mechanics (contact area, mean and maximum contact pressure) were investigated using pressure-sensitive sensors. Open-wedge osteotomy was performed using biplanar cuts and osteotomy angles of 5° and 10° were maintained using an external fixator. Tests were performed first with intact and then with dissected MCL. Nonparametric statistical analyses indicated a significant strain increase (p < 0.01) in the anterior and posterior fibres of the MCL with increasing osteotomy angle of up to 8.3% and 6.0%, respectively. Only after releasing the MCL the desired lateralisation of the mechanical axis was achieved, indicating a significant decrease in the maximum contact pressure in knee extension of - 25% (p = 0.028) and 30° knee flexion of - 21% (p = 0.027). The results of the present biomechanical study suggest, that an open-wedge high tibial osteotomy is most effective in reducing the medial contact pressure when spreading the osteotomy to 10° and concomitantly releasing the MCL. To transfer the results of this biomechanical study to the clinical day-to-day practice, it is necessary to factor in the individual ligamentous laxity of each patient into the treatment options e.g. particularly for patients with distinct knee ligament laxity or medial ligamentary instability, the release of the MCL should be performed with care. Controlled laboratory study.

Impact of five different medial patellofemoral ligament-reconstruction strategies and three different graft pre-tensioning states on the mean patellofemoral contact pressure: a biomechanical study on human cadaver knees

BackgroundThe medial patellofemoral ligament (MPFL) is the main stabiliser of the patella and thus mostly reconstructed in the surgical treatment of patellofemoral dislocation. The aims of this study were to gain a better understanding of the influence of altered MPFL graft-fixation locations and different graft pre-tensions on patellofemoral contact pressure.MethodsSix human cadaveric knee joints were placed in a six-degree-of-freedom knee simulator. Mean PFCP (mPFCP) was evaluated in knee flexion of 0, 30 and 90° using a calibrated pressure-measurement system. After data assessment of the native knee joint, five MPFL reconstruction conditions were conducted: Anatomical double bundle; non-anatomical proximal patellar; non-anatomical distal patellar; non-anatomical proximal femoral; non-anatomical ventral femoral. The gracilis graft was fixed at a defined knee flexion of 30° and pre-tensioned to 2, 10 and 20 N.ResultsKruskal-Wallis testing resulted in no mPFCP differences between the native and anatomical reconstruction states.Comparing the native and anatomical reconstruction states with the non-anatomical reconstruction states, no difference in the mPFCP both in knee extension (0°) (p>0.366) and in 30° knee flexion (p>0.349) was found. At 90° knee flexion, the following differences were identified: compared to the native knee state, the mPFCP increased after non-anatomical proximal femoral and non-anatomical ventral femoral reconstruction by 257% (p=0.04) and 292% (p=0.016), respectively. Compared to the anatomical reconstruction state, the mPFCP increased after non-anatomical proximal femoral reconstruction by 199% (p=0.042).Discussion and ConclusionsWith respect to all study findings and to restore a physiological PFCP, we recommend using the anatomical footprints for MPFL reconstruction and a moderate graft pretensioning of 2-10 N.

Implant preloading in extension reduces spring length change in dynamic intraligamentary stabilization: a biomechanical study on passive kinematics of the knee.

Dynamic intraligamentary stabilization (DIS) is a primary repair technique for acute anterior cruciate ligament (ACL) tears. For internal bracing of the sutured ACL, a metal spring with 8mm maximum length change is preloaded with 60-80N and fixed to a high-strength polyethylene braid. The bulky tibial hardware results in bone loss and may cause local discomfort with the necessity of hardware removal. The technique has been previously investigated biomechanically; however, the amount of spring shortening during movement of the knee joint is unknown. Spring shortening is a crucial measure, because it defines the necessary dimensions of the spring and, therefore, the overall size of the implant. Seven Thiel-fixated human cadaveric knee joints were subjected to passive range of motion (flexion/extension, internal/external rotation in 90° flexion, and varus/valgus stress in 0° and 20° flexion) and stability tests (Lachman/KT-1000 testing in 0°, 15°, 30°, 60°, and 90° flexion) in the ACL-intact, ACL-transected, and DIS-repaired state. Kinematic data of femur, tibia, and implant spring were recorded with an optical measurement system (Optotrak) and the positions of the bone tunnels were assessed by computed tomography. Length change of bone tunnel distance as a surrogate for spring shortening was then computed from kinematic data. Tunnel positioning in a circular zone with r = 5mm was simulated to account for surgical precision and its influence on length change was assessed. Over all range of motion and stability tests, spring shortening was highest (5.0 ± 0.2mm) during varus stress in 0° knee flexion. During flexion/extension, spring shortening was always highest in full extension (3.8 ± 0.3mm) for all specimens and all simulations of bone tunnels. Tunnel distance shortening was highest (0.15mm/°) for posterior femoral and posterior tibial tunnel positioning and lowest (0.03mm/°) for anterior femoral and anterior tibial tunnel positioning. During passive flexion/extension, the highest spring shortening was consistently measured in full extension with a continuous decrease towards flexion. If preloading of the spring is performed in extension, the spring can be downsized to incorporate a maximum length change of 5mm resulting in a smaller implant with less bone sacrifice and, therefore, improved conditions in case of revision surgery.

Possibility of quantitative T2-mapping MRI of cartilage near metal in high tibial osteotomy: A human cadaver study.

T2-mapping is a widely used quantitative MRI technique in osteoarthritis research. An important challenge for its application in the context of high tibial osteotomy (HTO) is the presence of metallic fixation devices. In this study, we evaluated the possibility of performing T2-mapping after a HTO, by assessing the extent of magnetic susceptibility artifacts and the influence on T2 relaxation times caused by two commonly used fixation devices. T2-mapping with a 3D fast spin-echo sequence at three Tesla was performed on 11 human cadaveric knee joints before and after implantation of a titanium plate and screws (n = 5) or cobalt chrome staples (n = 6). Mean T2 relaxation times were calculated in six cartilage regions, located in the distal and posterior cartilage of femoral condyles and the cartilage of tibial plateaus, both medially and laterally. T2 relaxation times before and after the implantation were compared with paired t-tests and Wilcoxon rank tests. Due to the extent of the magnetic susceptibility artifact, it was not possible to segment the knee cartilage and thus calculate T2 relaxation times in the lateral weight-bearing femoral and tibial cartilage regions only in the cobalt chrome group. In all cartilage regions of the titanium implanted knees and those unaffected by artifacts due to cobalt chrome implants, T2 relaxation times did not significantly differ between the two scans. Our results suggest that accurate T2-mapping after a HTO procedure is possible in all areas after implantation of a titanium fixation device and in most areas after implantation of a cobalt chrome fixation device. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1206-1212, 2018.