Human Adipose-derived Stem Cells Research Articles

Cartilage Tissue Construct from Human Adipose-Derived Mesenchymal Stem Cells on 3D-Printed Polylactic Acid Scaffold

Cartilage Tissue Construct from Human Adipose-Derived Mesenchymal Stem Cells on 3D-Printed Polylactic Acid Scaffold

Three-Dimensional Bioprinting of Tarsal Plates with Adipose-Derived Mesenchymal Stem Cells: Evaluation of Meibomian Gland Reconstruction in a Rat Model

Background: The aim of this study was to develop 3D-bioprinted scaffolds embedded with human adipose-derived stem cells (hADSCs) to reconstruct the tarsal plate in a rat model. Methods: Scaffolds were printed using a 3D bioprinter with a bioink composed of atelocollagen and alginate. hADSCs (5 × 105 cells/mL) were embedded within the bioink. A total of 30 male Sprague Dawley (SD) rats (300 g) were divided into three groups: group 1 (normal control, n = 10), group 2 (3D-bioprinted scaffolds, n = 10), and group 3 (3D-bioprinted scaffolds with hADSCs, n = 10). Four weeks after surgery, a histopathological analysis was performed using hematoxylin and eosin (H&E) staining, Masson’s trichrome (MT) staining, and immunofluorescence staining. Gene expression of SREBP-1, PPAR-γ, FADS-2, and FAS was assessed via real-time polymerase chain reaction (PCR). Results: No abnormalities were observed in the operated eyelids of any of the 30 rats. The histopathological analysis revealed lipid-secreting cells resembling meibocytes in both group 2 and group 3, with more pronounced meibocyte-like cells in group 3. Immunofluorescence staining for phalloidin expression showed a significant increase in group 3. Additionally, the RNA expression of SREBP-1, PPAR-γ, FADS-2, and FAS, all related to lipid metabolism, was elevated in group 3. Conclusions: The 3D-printed scaffolds combined with hADSCs were effective for tarsal plate reconstruction, with the hADSCs notably contributing to the generation of cells associated with lipid metabolism.

Extracellular Vesicles from Human Adipose-Derived Stem Cell Spheroids: Characterization and Therapeutic Implications in Diabetic Wound Healing

The management of diabetic wounds presents a considerable challenge within the realm of clinical practice. Cellular-derived nanoparticles, or extracellular vesicles (EV), generated by human adipose-derived stem cells (hASCs) have been investigated as promising candidates for the treatment of diabetic wounds. Nevertheless, limitations on the yield, as well as the qualitative angiogenic properties of the EV produced, have been a persistent issue. In this study, a novel approach involving the use of various cell culture morphologies, such as cell spheroids, on hASC was used to promote both EV yield and qualitative angiogenic properties for clinical use, with an emphasis on the in vivo angiogenic properties exhibited by the EV. Moreover, an increase in the secretion of the EV was confirmed after cell spheroid culture. Furthermore, microRNA(miRNA) analysis of the produced EVs indicated an increase in the presence of wound healing-associated miRNAs on the cell spheroid EV. Analysis of the effectiveness of the treated EVs in vitro indicated a significant promotion of the biological function of fibroblast and endothelial cells, cell migration, and cell proliferation post-cell spheroid EV application. Meanwhile, in vivo experiments on diabetic rats indicated a significant increase in collagen production, re-epithelization, and angiogenesis of the diabetic wound after EV administration. In this investigation, we posit that the use of cell spheroids for the culture of hASC represents a novel approach to enhance the substantial secretion of extracellular vesicles while increasing the angiogenic wound healing properties. This innovation holds promise for augmenting the therapeutic potential of EVs in diabetic wound healing, aligning with the exigencies of clinical applications for these nanoparticles.

Targeted CRISPR Regulation of ZNF865 Enhances Stem Cell Cartilage Deposition, Tissue Maturation Rates, and Mechanical Properties in Engineered Intervertebral Discs

Cell and tissue engineering based approaches have garnered significant interest for treating intervertebral disc degeneration and associated low back pain due to the substantial limitations of currently available clinical treatments. Herein we present a clustered regularly interspaced short palindromic repeats (CRISPR)-guided gene modulation strategy to improve the therapeutic potential of cell and tissue engineering therapies for treating intervertebral disc disease. Recently, we discovered a zinc finger (ZNF) protein, ZNF865 (BLST), which is associated with no in-depth publications and has not been functionally characterized. Utilizing CRISPR-guided gene modulation, we show that ZNF865 regulates cell cycle progression and protein processing. As a result, regulating this gene acts as a primary titratable regulator of cell activity. We also demonstrate that targeted ZNF865 regulation can enhance protein production and fibrocartilage-like matrix deposition in human adipose-derived stem cells (hASCs). Furthermore, we demonstrate CRISPR-engineered hASCs ability to increase GAG and collagen II matrix deposition in human-size tissue-engineered discs by 8.5-fold and 88.6-fold, respectively, while not increasing collagen X expression compared to naive hASCs dosed with growth factors. With this increased tissue deposition, we observe significant improvements in compressive mechanical properties, generating a stiffer and more robust tissue. Overall, we present novel biology on ZNF865 and display the power of CRISPR-cell engineering to enhance strategies treating musculoskeletal disease. STATEMENT OF SIGNIFICANCE: This work reports on a novel gene, ZNF865 (also known as BLST), that when regulated with CRISPRa, improves cartilagenous tissue deposition in human sized tissue engineering constructs. Producing tissue engineering constructs at human scale has proven difficult, and this strategy presents a broadly applicable tool to enhance a cells ability to produce tissue at these scales, as we saw an ∼8-88 fold increase in tissue deposition and significantly improved biomechanics in large tissue engineered intervertebral disc compared to traditional growth factor differentiation methods. Additionally, this work begins to elucidate the biology of this novel zinc finger protein, which appears to be critical in regulating cell function and activity.

Human adipose-derived stem cells promote migration of papillary thyroid cancer cell via leptin pathway

Introduction Obesity is associated with the incidence and poor prognosis of thyroid cancer, but the mechanism is not fully understood. The aim of this study was to investigate the effects of human adipose-derived stem cells (ADSCs) on the invasion and migration of thyroid cancer cells. Methods ADSCs-conditioned medium (ADSC-CM) was collected to culture thyroid cancer cell lines TPC-1 cells and BCPAP cells. The effects of ADSCs on thyroid cancer cell proliferation were determined by CCK8 and EdU assays, and the effects on migration were determined by Transwell and wound closure assays. Leptin neutralizing antibodies (NAB) were added to ADSC-CM to block leptin. In animal experiments, TPC-1 cells and BCPAP cells were injected into the tail vein of nude mice, and the leptin receptor antagonist peptide allo-aca was injected subcutaneously to block the leptin pathway. The number and size of metastatic lung tumours were observed after 8 weeks. Results ADSC-CM significantly promoted the invasion and migration of thyroid cancer cells and upregulated their matrix metalloproteinase 2 (MMP-2) levels, while NAB with the addition of leptin reduced the invasion and migration of thyroid cancer cells and downregulated MMP-2 levels. Allo-aca treatment reduced the number of metastatic lung nodules formed by thyroid cancer cells in nude mice and reduced the diameter of metastatic lesions. Conclusion ADSCs upregulate MMP-2 levels of thyroid cancer cells through exocrine leptin, thereby promoting cancer cell migration, which may be one of the key mechanisms by which obesity increases the invasiveness of thyroid cancer.

Leveraging Blood Components for 3D Printing Applications Through Programmable Ink Engineering Approaches.

This study proposes a tunable ink engineering methodology to allow 3D printing processability of highly bioactive but otherwise low-viscous and unprintable blood-derived materials. The hypothesis relies on improving the viscoelasticity and shear thinning behavior of platelet lysates (PL) and albumins (BSA) solutions by covalent coupling, enabling simultaneous extrusion and photocrosslinking upon filament deposition. The available amine groups on proteins (PL and BSA) are exploited for coupling with carboxyl groups present in methacrylated proteins (hPLMA and BSAMA), by leveraging carbodiimide chemistry. This reaction enabled the creation of a pre-gel from these extremely low-viscous materials (≈ 1Pa), with precise tuning of the reaction, resulting in inks with a range of controlled viscosities and elasticities. Shape-fidelity analysis is performed on 3D-printed multilayered constructs, demonstrating the ability to reach clinically relevant sizes (>2cm in size). After photocrosslinking, the scaffolds showcased a mechanically robust structure with sustained protein release over time. Bioactivity is evaluated using human adipose-derived stem cells, resulting in increased viability and metabolic activity over time. The herein described research methodology widens the possibilities for the use of low-viscosity materials in 3D printing but also enables the direct application of patient and blood-derived materials in precision medicine.

Enhanced Myogenic Differentiation of Human Adipose‐Derived Stem Cells via Integration of 3D Bioprinting and In Situ Shear‐Based Blade Coating

AbstractConventional treatments for volumetric muscle loss (VML) encounter limitations, such as donor site constraints and exploration of tissue engineering methods. Here, the fabrication of human adipose stem cell (hASC)‐laden cell constructs are proposed using a 3D bioprinting technique supported by blade casting. This process induces mechanotransduction to activate stem cell activities, including proliferation and myogenic differentiation. The printing conditions are optimized by assessing the effects of various process parameters on mechanotransduction signaling pathways. Notably, blade‐assisted bioprinting under carefully selected parameters enhanced the in vitro myogenic activity of the fabricated hASC constructs. Moreover, in vivo evaluation in mice with VML defects demonstrate that shear‐induced bioconstructs effectively restored lost functionalities and muscle volume compared to those of normally bioprinted cell constructs. The results show the potential of integrating bioprinting with hASC‐based therapies to enhance muscle regeneration and functional recovery, offering a meaningful platform for future tissue engineering approaches for VML treatment.

3D spheroids versus 2D-cultured human adipose stem cells to generate smooth muscle cells in an internal anal sphincter-targeting cryoinjured mouse model

BackgroundThe efficacy of cell implantation via 3D-spheroids to treat basal tone in fecal incontinence remains unclear. To address this, in this study, we aimed to identify cell differentiation and assess the development of a contractile phenotype corresponding to smooth muscle cells (SMCs) following implantation of 3D-spheroid and 2D-cultured human adipose stem cells (hASCs) in an in vivo internal anal sphincter (IAS)-targeted mouse model.MethodsWe developed an IAS-targeted in vivo model via rapid freezing (at − 196 °C) of the dorsal layers of the region of interest (ROI) of the IAS ring posterior quarter, between the submucosal and muscular layers, following submucosal dissection (n = 60 rats). After implantation of tetramethylindocarbocyanine perchlorate (Dil)-stained 3D and 2D-cells into randomly allocated cryoinjured rats, the entire sphincter ring or only the cryoinjured ROI was harvested. Expression of SMC markers, RhoA/ROCKII and its downstream molecules, and fibrosis markers was analyzed. Dil, α-smooth muscle actin (α-SMA), and RhoA signals were used for cell tracking.ResultsIn vitro, 3D-spheroids exhibited higher levels of SMC markers and RhoA/ROCKII-downstream molecules than 2D-hASCs. The IAS-targeted cryoinjured model exhibited substantial loss of SMC layers of the squamous epithelium lining of the anal canal, as well as reduced expression of SMC markers and RhoA-related downstream molecules. In vivo, 3D-spheroid implantation induced SMC markers and contractile molecules weakly at 1 week. At 2 weeks, the mRNA expression of aSma, Sm22a, Smoothelin, RhoA, Mypt1, Mlc20, Cpi17, and Pp1cd increased, whereas that of fibrosis markers reduced significantly in the 3D-spheroid implanted group compared to those in the sham, non-implanted, and 2D-hASC implanted groups. Protein levels of RhoA, p-MYPT1, and p-MLC20 were higher in the 3D-spheroid-implanted group than in the other groups. At 2 weeks, in the implanted groups, the cryoinjured tissues (which exhibited Dil, α-SMA, and RhoA signals) were restored, while they remained defective in the sham and non-implanted groups.ConclusionsThese findings demonstrate that, compared to 2D-cultured hASCs, 3D-spheroids more effectively induce a contractile phenotype that is initially weak but subsequently improves, inducing expression of RhoA/ROCKII-downstream molecules and SMC differentiation associated with IAS basal tone.

Collaborative Enhancement of Diabetic Wound Healing and Skin Regeneration by Recombinant Human Collagen Hydrogel and hADSCs.

Stem cell-based therapies hold significant promise for chronic wound healing and skin appendages regeneration, but challenges such as limited stem cell lifespan and poor biocompatibility of delivery systems hinder clinical application. In this study, an in situ delivery system for human adipose-derived stem cells is developed (hADSCs) to enhance diabetic wound healing. The system utilizes a photo-crosslinking recombinant human type III collagen (rHCIII) hydrogel to encapsulate hADSCs, termed the hADSCs@rHCIII hydrogel. This hydrogel undergoes local crosslinking at the wound site, establishing a sturdy 3D niche suitable for stem cell function. Consequently, the encapsulated hADSCs exhibit strong attachment and spreading within the hydrogels, maintaining their proliferation, metabolic activity, and viability for up to three weeks in vitro. Importantly, in vivo studies demonstrate that the hADSCs@rHCIII hydrogel achieves significant in situ delivery of stem cells, prolonging their retention within the wound. This ultimately enhances their immunomodulatory capabilities, promotes neovascularization and granulation tissue formation, facilitates matrix remodeling, and accelerates healing in a diabetic mouse wound model. Collectively, these findings highlight the potential of the conveniently-prepared and user-friendly hADSCs@rHCIII hydrogel as a promising therapeutic approach for diabetic wound treatment and in situ skin regeneration.

Biomimetic composite gelatin methacryloyl hydrogels for improving survival and osteogenesis of human adipose-derived stem cells in 3D microenvironment

Gelatin methacryloyl (GelMA) hydrogels are used for stem cell encapsulation in bone tissue engineering due to their fast and stable photo-crosslinking. However, cell viability and ability to induce osteogenesis are reduced by reactive oxygen species (ROS) produced during the crosslinking reaction. In this study, we developed biomimetic nanoparticles (TMNs) by combining tannic acid (TA) and simulated body fluid (SBF) minerals, and used them to synthesize GelMA-based composite hydrogels for addressing those limitations. The optimal concentrations of TA and SBF were investigated to create nanoparticles that can effectively scavenge ROS and induce osteogenesis. The incorporation of TMNs into composite hydrogels (G-TMN) significantly enhanced the survival and proliferation of encapsulated human adipose-derived stem cells (hADSCs) by providing resistance to oxidative conditions. In addition, the ions that were released, such as Ca2+ and PO43−, stimulated stem cell differentiation into bone cells. The hADSCs encapsulated in G-TMN had 2.0 ± 0.8-fold greater viability and 1.3 ± 1.8 times greater calcium deposition than those encapsulated in the hydrogel without nanoparticles. Furthermore, the in vivo transplantation of G-TMN into a subcutaneous mouse model demonstrated the rapid degradation of the gel-network while retaining the osteoinductive particles and cells in the transplanted area. The increased cellular activity observed in our multifunctional composite hydrogel can serve as a foundation for novel and effective therapies for bone deformities.

7877 Adipose Depot Differences In Regenerative Properties Of Exosomes Derived From Human Adipose Stem Cells

Abstract Disclosure: M.A. Krause-Hauch: None. R. Patel: None. B. Osborne: None. P. Albear: None. N.A. Patel: None. Many patients struggle with chronic recalcitrant wounds that are the result of delayed healing. Underlying inflammation is one major risk factor for impaired dermal wound healing that may lead to pathologies such as infection and scarring. Adult human adipose stem cells (hASCs) have shown tremendous potential in regenerative medicine. The regenerative potential of hASCs is dependent on secreted bioactive material which is packaged and released in extracellular exosomes. We previously showed that hASC exosomes from the subcutaneous depot (sc) promoted repair in human dermal fibroblasts using in vitro assays. In this study, we evaluated exosomes derived from the omental depot (om) of hASC and compared its efficacy with sc-hASC. Our results show differences in levels of the long noncoding RNA (lncRNA) cargo between om-hASCexo and sc-hASCexo. Next, we evaluated their repair potential in a wound model in vivo. Male and female F344 rats were dorsally wounded via punch biopsy and silicone scaffolding was attached to prevent contraction. The wounds were then either not treated (control) or treated with 50μg om-hASCexo or sc-hASCexo every alternate day when each wound size was measured for 1 week to monitor healing progress. After 7 days, wounds treated with either om-hASCexo and sc-hASCexo closed significantly faster than untreated control wounds. While no difference was observed in closure percentage after 7 days for wounds treated with either om-hASCexo and sc-hASCexo, sc-hASCexo appeared to act faster earlier (1-2 days post wound) in the wound healing process while om-hASCexo acts faster during later stages (2-4 days post wound) of wound healing. The wound tissue was collected for biochemical and histological analysis. qPCR analysis on day 7 revealed that both om-hASCexo and sc-hASCexo treatment resulted in increased levels of Collagen 1 & 3 and MMP9, while levels of TGF-β decreased with treatment. These results indicate that om-hASCexo and sc-hASCexo enhanced the wound healing process while decreasing inflammation of the wound. To determine the differences between om-hASCexo and sc-hASCexo treatments on wound healing pathways, RNAseq was performed. Results show specificity in pathway activation and gene expression between the om-hASCexo and sc-hASCexo treatments. In conclusion, we have demonstrated that the regenerative mechanisms differ between the hASC depots from which exosomes are secreted. At a broader level, this finding may shed light on the body’s organ health and repair processes in normal or disease states. Presentation: 6/3/2024

Magnesium oxide nanoparticle reinforced pumpkin-derived nanostructured cellulose scaffold for enhanced bone regeneration

Considering global surge in bone fracture prevalence, limitation in use of traditional healing approaches like bone grafts highlights the need for innovative regenerative strategies. Here, a novel green fabrication approach has reported for reinforcement of physicochemical performances of sustainable bioinspired extracellular matrix (ECM) based on decellularized pumpkin tissue coated with Magnesium oxide nanoparticles (hereafter called DM-Pumpkin) for enhanced bone regeneration. Compared to uncoated scaffold, DM-Pumpkin exhibited significantly improved surface roughness, mechanical stiffness, porosity, hydrophilicity, swelling, and biodegradation rate. Obtained nanoporous structure provides an ideal three-dimensional microenvironment for the attachment, migration and osteo-induction in human adipose-derived mesenchymal stem cells (h- AdMSCs). Calcium deposition and mineralization, alkaline phosphatase activity, and SEM imaging of the cells as well as increased expression of bone-related genes after 21 days incubation confirmed capability of DM-Pumpkin in mimicking the biological properties of bone tissue. The presence of MgONPs had a silencing effect on inflammatory factors and improved wound closure, verified by in vivo studies. Increased expression of collagen type I and osteocalcin in the h- AdMSCs cultured on DM-Pumpkin compared to control further corroborated gained results. Altogether, boosting physicochemical and biological properties of DM-Pumpkin due to surface modification is a promising approach for guided bone regeneration.

Prunella vulgaris and Tussilago farfara demonstrate anti-inflammatory activity in rabbits and protect human adipose stem cells against thermal stress in vitro

Ethnopharmacological relevancePrunella vulgaris L.(PV) and Tussilago farfara (TF) are perennial herbs rich in flavonoids and phenolic compounds with immense medicinal value. PV extract (PV-E) possesses potent antipyretic, anti-inflammtory, antioxidant, antiseptic, anti-cancer and immune stimulatory properties and have been traditionally known for the treatment of wounds, ulcers and sores. TF extract (TF-E) has been known for antibacterial, antioxidant, anti-inflammatory, anti-viral, anti-diabetic, anti-cancer, anti-obesity and wound healing effects. Additionally, TF-E infusions have been used for asthma, cough, and bronchopneumonia treatments. Aim of the studyThe therapeutic efficacy of transplanted human adipose stem cells (hASCs) is abrogated under the deteriorating effects of heat stress offered by burn wounds. Earlier researches has documented antioxidant priming as an effective strategy to enhance stem cell performance. As both PV-E and TF-E are known for their potent antioxidant effects. The present study aims to examine the cryoprotective effects of PV-E and TF-E priming on hASCs against in-vitro heat-induced thermal stress. Moreover, we determined the anti-inflammatory potential of both PV-E and TF-E on rabbits. MethodsAntioxidant capacity of both PV-E and TF-E is examined via DPPH assay and anti-inflammatory activity is assessed in rabbits using carrageen-induced paw edema model of inflammation. Next, we investigate the efficacy of different doses (1.25-100μg/ml) of PV-E and TF-E on hASCs; MTT, LDH, calcein AM staining, and wound scratch assay were used to assess cell viability, cytotoxicity, proliferation ability and cell migration potential in the cells. Then, hASCs were pretreated for 24 h with optimum doses of PV-E and TF-E determined from MTT assay results and were subsequently exposed to in-vitro thermal injury (51 °C,10 min). The cytoprotective effects of both PV-E and TF-E priming under thermal stress were investigated via MTT, LDH, annexin-V staining and gene expression analysis. ResultsBoth PV-E and TF-E extracts demonstrated potent antioxidant and effective anti-inflammatory activities, with a clear reduction in inflammation. Study on hASCs exhibited improved cell viabilities, enhanced cell proliferation and migration abilities of both extracts. While heat stress data revealed that PV-E (2.5μg/ml) and TF-E (5μg/ml) pretreatment significantly ameliorated effects of thermal-injuries in hASCs as depicted by significantly enhanced cell viabilities, low LDH release profile, and lower annexin-V expression and regulated gene expression of the pretreated cells. ConclusionPV-E and TF-E priming effectively enabled hASCs to combat thermal injury by significantly promoting cell survival than untreated cells. Hence, these findings suggest that PV-E and TF-E priming could be used to attain improved cellular responses and enhanced therapeutic efficacy in burnt tissue.

Immunocytochemistry assessment of vocal fold regeneration after cell-based implant in rabbits.

Cell-based outer vocal fold replacement (COVR) offers a potential treatment for severe vocal fold scarring or cancer reconstruction. Previous work in rabbits using human adipose-derived stem cells (ASC) in fibrin suggested that a hybrid structure emerged within 2 months, containing both implanted and host cells. This project uses immunocytochemistry to better define the phenotypic fate of implanted cells and features of the extracellular environment. Immunocytochemistry was performed on sections collected from rabbits 2 months after COVR implantation or scar surgery. Cellular targets included human leukocyte antigen (HLA), CD31, and smooth muscle actin (SMA). HLA was present in all implanted sections and was used to identify human cells. In adjacent sections, HLA-positive cells were identified expressing CD31. SMA was not identified in the same cells as HLA. These markers were also present in injured vocal folds not receiving COVR. SMA protein content did not differ according to treatment. Implanted human ASC persist in rabbit vocal folds. Some appear to express CD31, an endothelial marker. Smooth muscle actin, a marker of myofibroblast phenotype, was present in all sections regardless of treatment, and was not identified in hASC. Host cells also infiltrate the structure, producing a hybrid host-graft vocal fold.

SUN1 inhibits osteogenesis and promotes adipogenesis of human adipose-derived stem cells by regulating α-tubulin and CD36 expression.

Sad and UNC84 domain 1 (SUN1) is a kind of nuclear envelope protein with established involvement in cellular processes, including nuclear motility and meiosis. SUN1 plays an intriguing role in human adipose-derived stem cells (hASCs) differentiation; however, this role remains largely undefined. This study was undertaken to investigate the role of SUN1 in hASCs differentiation, as well as its underlying mechanisms. Employing siRNAs, we selectively downregulated SUN1 and CD36 expression. Microtubules were depolymerized using nocodazole, and PPARγ was activated using rosiglitazone. Western blotting was performed to quantify SUN1, PPARγ, α-tubulin, CD36, OPN, and adiponectin protein expression levels. Alkaline phosphatase and Oil red O staining were used to assess osteogenesis and adipogenesis, respectively. Downregulated SUN1 expression increased osteogenesis and decreased adipogenesis in hASCs, concomitant with upregulated α-tubulin expression and downregulated CD36 expression, alongside reduced nuclear localization of PPARγ. Microtubule depolymerization increased CD36 expression. Rescue experiments indicated that microtubule depolymerization counteracted the downregulated SUN1-induced phenotypic changes. This study demonstrates that SUN1 influences the differentiation of hASCs towards osteogenic and adipogenic lineages, indicating its essential role in cell fate.

3D-printed injectable nanocomposite cryogel scaffolds for bone tissue regeneration

Cryogels are known for their high water content and interconnected macroporosity, two relevant features in tissue engineering approaches. The cryogel structure can support tissue growth as it allows nutrient and oxygen diffusion, removal of waste products, as well as an enhancement of cell infiltration and proliferation. Bioactive glass nanoparticles are biocompatible and clinically approved bioactive materials widely used as implants in the human body to repair or replace diseased or damaged bones. They are known to facilitate bone binding while stimulating bone growth. Indeed, the combination of cryogels with bioactive nanoparticles has already demonstrated promising results for bone regeneration. Although the developed biomaterials succeed in bone regeneration, they lack suitability for minimal invasive procedures or patient-specificity. Here, we demonstrate a freeform 3D printed nanocomposite cryogel, resorting to an ink composed of functionalized gelatin and bioactive glass nanoparticles with methacrylate groups. Complex structures with multiple layers were 3D printed in a xanthan gum supporting bath. The developed 3D printed nanocomposite cryogels demonstrate the ability to recover their shape without any permanent damage, withstanding up to 65 % compression upon injection. Additionally, they stimulate the differentiation of human adipose-derived stem cells into the osteoblast lineage, therefore promoting bone tissue growth. We further demonstrated their suitability for minimal invasive therapeutics by filling a reproduction of a maxillofacial defect. The developed 3D-printed nanocomposite cryogels offer robust shape-recovery properties, easy injectability, tailored geometry into patient-specific injuries, and high osteogenic bioactivity, showcasing its versatility for bone regeneration purposes.

Blockade of ITGA2/3/5 Promotes Adipogenic Differentiation of Human Adipose-derived Mesenchymal Stem Cells.

The integrin α (ITGA) subfamily genes play a fundamental role in various cancers. However, the potential mechanism and application values of ITGA genes in adipogenic differentiation of human adipose-derived stem cells (hADSCs) remain elusive. This study confirmed that ITGA2/3/5 mRNA expressions were repressed during adipogenesis. Blockade of ITGA2/3/5 enhanced adipogenic differentiation of hADSCs. Oil red O staining found that more lipid droplets were apparent in the ITGA2/3/5 inhibition group following 14 d adipogenic induction than in the control group. In addition, inhibition of ITGA2/3/5 promoted the expression of adipogenesis-related genes (PPAR-γ, C/EBPα, FABP4). Mechanistically, ITGA2/3/5 functioned by regulating the Rac1 signaling pathway, which reasonably explains ITGA2/3/5's role in adipogenic differentiation of hADSCs. Our studies suggest that blockades of ITGA2/3/5 promote the adipogenic differentiation of hADSCs.

ALKBH5 Regulates Osteogenic Differentiation via the lncRNA/mRNA Complex

Human adipose-derived stem cells (hASCs) are commonly used in bone tissue regeneration. The N6-methyladenosine (m6A) modification has emerged as a novel regulatory mechanism for gene expression, playing a critical role in osteogenic differentiation of stem cells. However, the precise role and mechanism of alkylation repair homolog 5 (ALKBH5) in hASC osteogenesis remain incompletely elucidated and warrant further investigation. Herein, we employed methylated RNA immunoprecipitation sequencing, RNA sequencing, and weighted gene coexpression network analysis to identify a key long noncoding RNA (lncRNA) in hASCs: lncRNA AK311120. Functional experiments demonstrated that lnc-AK311120 promoted the osteogenic differentiation of hASCs, while a mutation at the m6A central site A of lnc-AK311120 was found to decrease the level of m6A modification. The osteogenic effect of ALKBH5 was confirmed both in vitro and in vivo using a mandibular defect model in nude mice. Subsequent investigations revealed that knockdown of ALKBH5 resulted in a significant increase in the m6A modification level of lnc-AK311120, accompanied by a downregulation in the expression level of lnc-AK311120. Additional rescue experiments demonstrated that overexpression of lnc-AK311120 could restore the phenotype after ALKBH5 knockdown. We observed that AK311120 interacted with the RNA-binding proteins DExH-Box helicase 9 (DHX9) and YTH domain containing 2 (YTHDC2) to form a ternary complex, while mitogen-activated protein kinase kinase 7 (MAP2K7) served as the shared downstream target gene of DHX9 and YTHDC2. Knockdown of AK311120 led to a reduction in the binding affinity between DHX9/YTHDC2 and the target gene MAP2K7. Furthermore, ALKBH5 facilitated the translation of MAP2K7 and activated the downstream JNK signaling pathway through the AK311120–DHX9–YTHDC2 complex, without affecting its messenger RNA level. Collectively, we have investigated the regulatory effect and mechanism of ALKBH5-mediated demethylation of lncRNA in hASC osteogenesis for the first time, offering a promising approach for bone tissue engineering.

Comparison of Bioengineered Scaffolds for the Induction of Osteochondrogenic Differentiation of Human Adipose-Derived Stem Cells.

Osteochondral lesions may be due to trauma or congenital conditions. In both cases, therapy is limited because of the difficulty of tissue repair. Tissue engineering is a promising approach that relies on designed scaffolds with variable mechanical attributes to favor cell attachment and differentiation. Human adipose-derived stem cells (hASCs) are a very promising cell source in regenerative medicine with osteochondrogenic potential. Based on the assumption that stiffness influences cell commitment, we investigated three different scaffolds: a semisynthetic animal-derived GelMA hydrogel, a combined scaffold made of rigid PEGDA coated with a thin GelMA layer and a decellularized plant-based scaffold. We investigated the role of different biomechanical stimulations in the scaffold-induced osteochondral differentiation of hASCs. We demonstrated that all scaffolds support cell viability and spontaneous osteochondral differentiation without any exogenous factors. In particular, we observed mainly osteogenic commitment in higher stiffness microenvironments, as in the plant-based one, whereas in a dense and softer matrix, such as in GelMA hydrogel or GelMA-coated-PEGDA scaffold, chondrogenesis prevailed. We can induce a specific cell commitment by combining hASCs and scaffolds with particular mechanical attributes. However, in vivo studies are needed to fully elucidate the regenerative process and to eventually suggest it as a potential approach for regenerative medicine.

The Role of Matrix Stiffness And Viscosity on Lipid Phenotype And Fat Lineage Potential.

Autologous fat transfer is a common procedure that patients undergo to rejuvenate large soft tissue defects. However, these surgeries are complicated by limited tissue sources, donor-site morbidity, and necrosis. While the biofabrication of fat tissue can serve as a clinical option for reconstructive surgery, the influence of matrix mechanics, specifically stiffness and viscosity, on adipogenesis requires further elucidation. Additionally, the effects of these mechanical parameters on metabolic and thermogenic fat potential haveyet to be investigated. In this study, gelatinmethacryloyl (GelMA) polymers with varying degrees of methacrylation (DoM) were fabricated to create matrices with different stiffnesses and viscosities. Human adipose-derived mesenchymal stem cells were then encapsulated in mechanically tunable GelMA and underwent adipogenesis to investigate the effects of matrix mechanics on lipid phenotype and fat potential. Mechanical testing confirmed that GelMA stiffness was regulated by DoM and weight composition, whereas viscosity was determined by the latter. Further work revealed that while lipid phenotype became more enriched as matrix stiffness and viscosity declined, the potential toward metabolic and thermogenic fat appeared to be more viscous dependent rather than stiffness dependent. In addition, fatty acid binding protein 4 and uncoupling protein 1 gene expression exhibited viscous-dependent behavior despite comparable levels of peroxisome proliferator-activated receptor gamma. However, despite the superior role of viscosity, lipid quantity and mitochondrial abundance demonstrated stiffness-dependent behavior. Overall, this work revealed that matrix viscosity played a more superior role than stiffness in driving adipogenesis and distinguishing between metabolic and thermogenic fat potential. Ultimately, this differentiation in fat production is important for engineering ideal adipose tissue for large soft tissue defects.