Host-guest Properties Research Articles

Porous Organic Cage-Based Quasi-Solid-State Electrolyte with Cavity-Induced Anion-Trapping Effect for Long-Life Lithium Metal Batteries

Porous organic cages (POCs) with permanent porosity and excellent host–guest property hold great potentials in regulating ion transport behavior, yet their feasibility as solid-state electrolytes has never been testified in a practical battery. Herein, we design and fabricate a quasi-solid-state electrolyte (QSSE) based on a POC to enable the stable operation of Li-metal batteries (LMBs). Benefiting from the ordered channels and cavity-induced anion-trapping effect of POC, the resulting POC-based QSSE exhibits a high Li+ transference number of 0.67 and a high ionic conductivity of 1.25 × 10−4 S cm−1 with a low activation energy of 0.17 eV. These allow for homogeneous Li deposition and highly reversible Li plating/stripping for over 2000 h. As a proof of concept, the LMB assembled with POC-based QSSE demonstrates extremely stable cycling performance with 85% capacity retention after 1000 cycles. Therefore, our work demonstrates the practical applicability of POC as SSEs for LMBs and could be extended to other energy-storage systems, such as Na and K batteries.

General and Modular Synthesis of Covalent Organic Cages for Efficient Molecular Recognition.

Cage-type structures based on coordination and dynamic covalent chemistry have the characteristics of facile and efficient preparation but poor stability. Chemically stable organic cages, generally involving fragment coupling and multi-step reactions, are relatively difficult to synthesize. Herein, we offer a general and modular strategy to customize covalent organic cages with diverse skeletons and sizes. First, one skeleton (S) module with three extension (E) modules and three reaction (R) modules are connected by one- or two-step coupling to get the triangular monomer bearing three reaction sites. Then one-pot Friedel-Crafts condensation of the monomer and linking module of paraformaldehyde produces the designed organic cages. The cage forming could be regulated by the geometrical configuration of monomeric blocks. The S-E-R angles in the monomer is crucial; only 120° (2,4-dimethoxyphen as reaction module) or 60° (2,5-dimethoxyphen as reaction module) angle between S-E-R successfully affords the resulting cages. By the rational design of the three modules, a series of organic cages have been constructed. In addition, the host-guest properties show that the representative cages could strongly encapsulate neutral aromatic diimide guests driven by solvophobic interactions in polar solvents, giving the highest association constant of (2.58±0.18)×105 M-1.

Ring‐Size Control and Guest‐Induced Circularly Polarized Luminescence in Heteroleptic Pd3A3B3 and Pd4A4B4 Assemblies

AbstractTwo new structural motifs within the class of heteroleptic PdnAnBn assemblies, namely syn‐cis‐Pd3A3B3 bowls and bowl‐ (syn) or saddle‐ (anti) shaped cis‐Pd4A4B4 rings are introduced. All of the ten examples share a common longer fluorenone‐based bis‐monodentate ligand, equipped with meta‐pyridine donor groups. The ring size (3‐ vs. 4‐membered) and conformational preference (bowl vs. saddle) are controlled by the choice of the shorter ligand. These carry para‐pyridine donors, different aromatic backbones (benzene, thiophene or selenophene) and either no or small or bulky endohedral substituents, serving to control the nuclearity of the heteroleptic rings through different effects (ligand angle, charge distribution or backbone bulk). Moreover, the luminescence of the fluorenone ligand is conserved in the formed architectures. Emission intensity as well as host–guest properties vary depending on the inward‐pointing functions. All Pd3A3B3 assemblies are shown to bind chiral guest BINOL bis‐sulfonate which imparts its chirality to the entire host–guest complex. This results in a guest‐induced circular dichroism (CD) and circularly polarized luminescence (CPL) with dissymmetry factor glum up to 10−3.

Ring-Size Control and Guest-Induced Circularly Polarized Luminescence in Heteroleptic Pd3A3B3 and Pd4A4B4 Assemblies.

Two new structural motifs within the class of heteroleptic PdnAnBn assemblies, namely syn-cis-Pd3A3B3 bowls and bowl- (syn) or saddle- (anti) shaped cis-Pd4A4B4 rings are introduced. All of the ten examples share a common longer fluorenone-based bis-monodentate ligand, equipped with meta-pyridine donor groups. The ring size (3- vs. 4-membered) and conformational preference (bowl vs. saddle) are controlled by the choice of the shorter ligand. These carry para-pyridine donors, different aromatic backbones (benzene, thiophene or selenophene) and either no or small or bulky endohedral substituents, serving to control the nuclearity of the heteroleptic rings through different effects (ligand angle, charge distribution or backbone bulk). Moreover, the luminescence of the fluorenone ligand is conserved in the formed architectures. Emission intensity as well as host-guest properties vary depending on the inward-pointing functions. All Pd3A3B3 assemblies are shown to bind chiral guest BINOL bis-sulfonate which imparts its chirality to the entire host-guest complex. This results in a guest-induced circular dichroism (CD) and circularly polarized luminescence (CPL) with dissymmetry factor glum up to 10-3.

Engineering a Surfactant Trap via Postassembly Modification of an Imine Cage.

Imine self-assembly stands as a potent strategy for the preparation of molecular organic cages. However, challenges persist, such as water insolubility and limited recognition properties due to constraints in the application of specific components during the self-assembly process. In this study, we addressed these limitations by initially employing a locking strategy, followed by a postassembly modification. This sequential approach enables precise control over both the solubility and host-guest properties of an imine-based cage. The resulting structure demonstrates water solubility and exhibits an exceptional capacity to selectively interact with anionic surfactants, inducing their precipitation. Remarkably, each cage precipitates 24 equiv of anionic surfactants even at concentrations much lower than the surfactant's critical micelle concentration (CMC), ensuring their complete removal. Molecular simulations elucidate how anionic surfactants specifically interact with the cage to facilitate aggregation below the surfactant CMC and induce precipitation as a micellar cross-linker. This innovative class of cages paves the way for the advancement of materials tailored for environmental remediation.

CageCavityCalc (C3): A Computational Tool for Calculating and Visualizing Cavities in Molecular Cages.

Organic(porous) and metal-organic cages are promising biomimetic platforms with diverse applications spanning recognition, sensing, and catalysis. The key to the emergence of these functions is the presence of well-defined inner cavities capable of binding a wide range of guest molecules and modulating their properties. However, despite the myriad cage architectures currently available, the rational design of structurally diverse and functional cages with specific host-guest properties remains challenging. Efficiently predicting such properties is critical for accelerating the discovery of novel functional cages. Herein, we introduce CageCavityCalc (C3), a Python-based tool for calculating the cavity size of molecular cages. The code is available on GitHub at https://github.com/VicenteMartiCentelles/CageCavityCalc. C3 utilizes a novel algorithm that enables the rapid calculation of cavity sizes for a wide range of molecular structures and porous systems. Moreover, C3 facilitates easy visualization of the computed cavity size alongside hydrophobic and electrostatic potentials, providing insights into host-guest interactions within the cage. Furthermore, the calculated cavity can be visualized using widely available visualization software, such as PyMol, VMD, or ChimeraX. To enhance user accessibility, a PyMol plugin has been created, allowing nonspecialists to use this tool without requiring computer programming expertise. We anticipate that the deployment of this computational tool will significantly streamline cage cavity calculations, thereby accelerating the discovery of functional cages.

Desymmetrized pillar[8]arenes: High-yield synthesis, functionalization, and host-guest chemistry

The preparation, functionalization, and investigations in host-guest properties of high-level pillararene macrocycles have long been a big challenge because of the lack of efficient synthetic methods. Herein, a novel type of pillararene derivative, namely desymmetrized pillar[8]arene (DP[8]A), has been successfully synthesized via a facile two-step strategy with high yield. Compared with its pillar[8]arene counterpart, DP[8]A is composed of four alkoxy-substituted benzene units and four bare benzene rings. Single crystal analysis has been performed in order to unveil the molecular conformation and packing mode of DP[8]A, which indicated that DP[8]A possesses a unique chair-like structure and much smaller steric hindrance. Density functional theory (DFT) calculations and electrostatic potential map suggested the inhomogeneous electronic distribution in the DP[8]A cavity. Water-soluble carboxylate-modified DP[8]A, that is, CDP[8]A, was also prepared to investigate the host-guest properties in aqueous solution with methyl viologen (MV), where the binding constant and morphologies of the formed host-guest complexes have been studied. In all, this new version of eight-membered pillararene derivative might potentially serve as a powerful macrocycle candidate for further applications in supramolecular chemistry.

Switchable Redox and Thermo-Responsive Supramolecular Polymers Based on Cyclodextrin-Polyoxometalate Tandem.

Supramolecular polymers built from stimuli-responsive host-guest interactions represent an attractive way of tailoring smart materials. Herein, we exploit the chaotropic effect of polyoxometalates and related host-guest properties to design unconventional polymer systems with reversible redox and thermo-responsive sol-gel transition. These supramolecular networks result from the association of cyclodextrin-based oligomers and Keggin-type POMs acting as electro-active crosslinking agents. The structure and the dynamics of such self-assembly systems have been investigated using a multiscale approach involving MALDI-TOF, viscosity measurements, cyclic voltammetry, 1H-NMR (1D and DOSY), and Small-Angle X-ray Scattering. Our results reveal that the chaotropic effect corresponds to a powerful and efficient force that can be used to induce responsiveness in hybrid supramolecular oligomeric systems.

Smart pillar[5]arene-based PDMAEMA/PES beads for selective dye pollutants removal: design, synthesis, chemical-physical characterization, and adsorption kinetic studies.

This article reports on the synthesis of an innovative smart polymer, P5-QPDMAEMA, opportunely developed with the aim of combining the responsiveness of PDMAEMA polymer and the host-guest properties of covalently linked pillar[5]arenes. Thanks to a traditional Non-Induced Phase Separation (NIPS) process performed at various coagulation pH, the blending of P5-QPDMAEMA with polyethersulfone gave rise to the formation of functional beads for the removal of organic dyes in water. Adsorption tests are carried out on all the produced blend-based beads by employing two representative dyes, the cationic methylene blue (MB), and the anionic methyl orange (MO). In particular, the P5-QPDMAEMA based beads, prepared at acidic pH, featured the best MO removal rate (i. e., 91.3 % after 150 minutes starting from a 20 mg ⋅ L-1 solution) and a high selectivity towards the removal of the selected anionic dye. Based on the adsorption kinetics and isotherm calculations, the pseudo-first order and Freundlich models were shown to be the most suitable to describe the MO adsorption behavior, achieving a maximum adsorption capacity of 21.54 mg ⋅ g-1. Furthermore, zwitterionic beads are obtained by a post-functionalization of the PDMAEMA and the P5-QPDMAEMA based beads, to test their removal capability towards both anionic and cationic dyes, as shown.

Two pyrene-based cagearene constitutional isomers: synthesis, separation, and host–guest chemistry

Herein we successfully synthesize two pyrene-based cagearene constitutional isomers and separate them to investigate their host–guest properties.

An anthracene-containing crown ether: synthesis, host-guest properties and modulation of solid state luminescence.

Organic solid state vapochromic materials are of great significance for the development of supramolecular chemistry and materials science. Herein, we synthesize a crown ether derivative (An34C10) containing two anthracene units and construct new crown ether-based vapochromic host-guest co-crystals. Due to the presence of anthracene, An34C10 not only shows good fluorescence properties but also displays mechanochromism. Single crystal structural analysis, powder X-ray diffraction and differential scanning calorimetry experiments demonstrate that the transformation between different stacking modes of An34C10 is responsible for mechanochromism. In addition, An34C10 can complex with 1,2,4,5-tetracyanobenzene (TCNB) to form host-guest complex (An34C10@TCNB) co-crystals. Because organic solvent fuming alters charge-transfer interactions in An34C10@TCNB, the fluorescence of the co-crystals can be turned on and off by 4-methylpyridine and chloroform vapors, respectively, realizing selective detection with opposite emission outputs. Meanwhile, the stimuli-responsive properties of An34C10 and An34C10@TCNB possess good cycling performance. This work provides a new strategy for the construction of organic solid state luminescent materials.

From π-conjugated macrocycles to heterocycloarenes based on benzo[2,1-b:3,4-b']dithiophene (BDTh): size- and geometry-dependent host-guest properties.

π-Conjugated macrocycles have been highly attractive due to their challenging synthesis, fascinating aesthetic structure and unique physical and chemical properties. Although some progress has been made in synthesis, the study of π-macrocycles with different structural characteristics and supramolecular interactions still faces major challenges. In this paper, two new single-bond linked macrocycles (MS-4T/MS-6T) were reported, and the corresponding vinyl-bridged heterocycloarenes (MF-4T/MF-6T) were synthesized by the periphery fusion strategy. Further studies have indicated that the structure of these four macrocycles is determined by both size and curvature, showing unique variations from nearly planar to bowl and then to saddle. Interestingly, the nearly planar MS-4T with a small size and the rigid saddle-shaped MF-6T show no obvious response to fullerenes C60 or C70, while the bowl-shaped MS-6T and MF-4T demonstrate a strong binding affinity towards fullerenes C60 and C70. What's more, two kinds of co-crystals with capsule-like configurations, MS-6T@C60 and MS-6T@C70, have been successfully obtained, among which the former shows a loose columnar arrangement while the latter displays a unique three-dimensional honeycomb arrangement that is extremely rare in supramolecular complexes. This work systematically studies the π-conjugated macrocycles and provides a new idea for the development of novel host-guest systems and further multifunctional applications.

Emerging sensing platforms based on Cucurbit[n]uril functionalized gold nanoparticles and electrodes.

Cucurbit[n]urils (CB[n]s, n = 5-8, 10, and 14), synthetic macrocycles with unique host-guest properties, have triggered increasing research interest in recent years. Gold nanoparticles (Au NPs) and electrodes stand out as exceptional substrates for sensing due to their remarkable physicochemical characteristics. Coupling the CB[n]s with Au NPs and electrodes has enabled the development of emerging sensing platforms for various promising applications. However, monitoring the behavior of analytes at the single-molecule level is currently one of the most challenging topics in the field of CB[n]-based sensing. Constructing supramolecular junctions in a sensing platform provides an ideal structure for single-molecule analysis, which can provide insights for a fundamental understanding of supramolecular interactions and chemical reactions and guide the design of sensing applications. This feature article outlines the progress in the preparation of the CB[n] functionalized Au NPs and Au electrodes, as well as the construction and application of supramolecular junctions in sensing platforms, based on the methods of recognition tunneling (RT), surface-enhanced Raman spectroscopy (SERS), single-molecule force spectroscopy (SMFS), and electrochemical sensing (ECS). A brief perspective on the future development of and challenges in CB[n] mediated sensing platforms is also covered.

Merging Bambus[6]uril and Biotin[6]uril into an Enantiomerically Pure Monofunctionalized Hybrid Macrocycle.

Bambus[6]urils and biotin[6]urils are macrocycles with an exceptional affinity for inorganic anions. Here, we investigated statistical condensation of 2,4-dibenzylglycoluril and d-biotin, monomers of the corresponding macrocycles, to prepare the enantiomerically pure macrocycle 1 containing a single d-biotin and five glycoluril units. Host-guest properties of 1 in chloroform solution and solid state were investigated. The macrocycle 1 bearing a single functional group was employed in the formation of [1]rotaxane utilizing reversible covalent bonds.

Phenazine functionalized pillar[5]arene: Synthesis, host-guest property and application in the fluorescence sensing of biogenic amine in solution, gel and air

The development of selective sensing materials for biogenic amine detection has attracted tremendous interest because amines have high toxicity and exist widely. In this paper, phenazine-bridged pillar[5]arene monomers PA and a naphthalene diimide containing neutral guest-bearing alkyl chain binding sites NDI were designed and synthesized. They could self-assemble by host–guest interactions to form a microsphere structure in dilute solution. A series of biogenic amines can selectively quench the microsphere fluorescence. The microsphere structure transformed into the supramolecular polymer gel at relatively high concentrations. More interestingly, the supramolecular polymerization process induced fluorescence emission enhancement based on an AIE mechanism in the gel state. The supramolecular polymer gel material exhibited sensitive stimulus–response behavior owing to stimuli-induced reversible electron transfer in the presence of various amines. The gel soft material collapse could be achieved by fuming under a series of amines vapors. Besides, our results demonstrate an effective material design strategy that may be extended to fluorescence sensing of biogenic amine in solution, gel, and air and applications to detect food spoilage. It is envisaged that this important method would pave the way for overcoming the sensor's application constraints in the solution state.

Alignment and Dynamic Inversion of Planar Chirality in Pillar[n]arenes

AbstractPillar[n]arenes are symmetrical macrocyclic compounds composed of benzene panels with para‐methylene linkages. Each panel usually exhibits planar chirality and prefers chirality‐aligned states. Because of this feature, pillar[n]arenes are attractive scaffolds for chiroptical materials that are easy to prepare and optically resolve and show intense circular dichroism (CD) signals. In addition, rotation of the panels endows the chirality of pillar[n]arenes with a dynamic nature. The chirality in tubular oligomers and supramolecular assemblies sometimes show time‐ and procedure‐dependent alignment phenomena. Furthermore, the CD signals of some pillar[n]arenes respond to the addition of chiral guests when their dynamic chirality is coupled with host–guest properties. By using diastereomeric pillar[n]arenes with additional chiral structures, the response can also be caused by achiral guests and changes of the environment, providing molecular sensors.

Alignment and Dynamic Inversion of Planar Chirality in Pillar[n]arenes.

Pillar[n]arenes are symmetrical macrocyclic compounds composed of benzene panels with para-methylene linkages. Each panel usually exhibits planar chirality and prefers chirality-aligned states. Because of this feature, pillar[n]arenes are attractive scaffolds for chiroptical materials that are easy to prepare and optically resolve and show intense circular dichroism (CD) signals. In addition, rotation of the panels endows the chirality of pillar[n]arenes with a dynamic nature. The chirality in tubular oligomers and supramolecular assemblies sometimes show time- and procedure-dependent alignment phenomena. Furthermore, the CD signals of some pillar[n]arenes respond to the addition of chiral guests when their dynamic chirality is coupled with host-guest properties. By using diastereomeric pillar[n]arenes with additional chiral structures, the response can also be caused by achiral guests and changes of the environment, providing molecular sensors.

Mono-functionalized pillar[n]arenes: Syntheses, host–guest properties and applications

Pillar[n]arenes are a novel class of macrocyclic hosts reported by Ogoshi and co-workers in 2008. Because of their rigid pillar structures, interesting host–guest properties and ease of modifications, pillar[n]arenes have been developed rapidly in the field of functional materials and biomedicine. The modifications of pillar[n]arenes at different positions can give them varied characteristics. Functional groups can be introduced into one position of pillar[n]arenes without changing host–guest properties of pillar[n]arenes. A series of pillar[n]arene dimers, trimers, tetramers and metallacycles can be constructed by mono-functionalized pillar[n]arenes. In this review, two synthetic methods of mono-functionalized pillar[n]arenes are summarized and structures containing mono-functionalized pillar[n]arenes are described. Furthermore, the applications of mono-functionalized pillar[n]arenes in different fields (e.g., supramolecular polymers, sensors, molecular machines, catalysis, biological applications and light-harvesting systems) are also introduced. Hopefully, this article will be useful for researchers studying pillar[n]arenes, especially the mono-functionalized pillar[n]arenes.

Biphenarenes, Versatile Synthetic Macrocycles for Supramolecular Chemistry.

The development of supramolecular chemistry has always been accompanied by the innovation of macrocyclic hosts. The synthesis of novel macrocycles with unique structures and functions will bring new development opportunities for supramolecular chemistry. As a new generation of macrocyclic hosts, biphenarenes have customizable cavity sizes and diverse backbones, overcoming the limitation that the cavities of traditionally popular macrocyclic hosts are generally smaller than 10 Å. These features undoubtedly endow biphenarenes with distinguished host-guest properties, which have attracted more and more attention. In this review, the structural characteristics and molecular recognition properties of biphenarenes are summarized. In addition, the applications of biphenarenes in adsorption and separation, drug delivery, fluorescence sensing and other fields are introduced. Hopefully, this review will provide a reference for the study of macrocyclic arenes, especially biphenarenes.

Recent Development of Supramolecular Cancer Theranostics Based on Cyclodextrins: A Review.

With the development of personalized medical demands for precise diagnosis, rational management and effective cancer treatment, supramolecular theranostic systems have received widespread attention due to their reversibly switchable structures, sensitive response to biological stimuli and integration ability for multiple capabilities in a single platform with a programmable fashion. Cyclodextrins (CDs), benefiting from their excellent characteristics, such as non-toxicity, easy modification, unique host-guest properties, good biocompatibility, etc., as building blocks, serve as an all-purpose strategy for the fabrication of a supramolecular cancer theranostics nanodevice that is capable of biosafety, controllability, functionality and programmability. This review focuses on the supramolecular systems of CD-bioimaging probes, CD-drugs, CD-genes, CD-proteins, CD-photosensitizers and CD-photothermal agents as well as multicomponent cooperation systems with regards to building a nanodevice with functions of diagnosis and (or) therapeutics of cancer treatment. By introducing several state-of-the-art examples, emphasis will be placed on the design of various functional modules, the supramolecular interaction strategies under the fantastic topological structures and the hidden "bridge" between their structures and therapeutic efficacy, aiming for further comprehension of the important role of a cyclodextrin-based nanoplatform in advancing supramolecular cancer theranostics.