Hook-filament Junction Research Articles

Interactions among components of the Salmonella flagellar export apparatus and its substrates.

We have examined the cytoplasmic components (FliH, FliI and FliJ) of the type III flagellar protein export apparatus, plus the cytoplasmic domains (FlhAC and FlhBC) of two of its six membrane components. FliH, FlhAC and FliJ, when overproduced, caused inhibition of motility of wild-type cells and inhibition of the export of substrates such as the hook protein FlgE. Co-overproduction of FliH and FliI substantially relieved the inhibition caused by FliH, suggesting that it is excess free FliH that is inhibitory and that FliH and FliI form a complex. We purified His-FLAG-tagged versions of: (i) export components FliH, FliI, FliJ, FlhAC and FlhBC; (ii) rod/hook-type export substrates FlgB (rod protein), FlgE (hook protein), FlgD (hook capping protein) and FliE (basal body protein); and (iii) filament-type export substrates FlgK and FlgL (hook-filament junction proteins) and FliC (flagellin). We tested for protein-protein interactions by affinity blotting. In many cases, a given protein interacted with more than one other component, indicating that there are likely to be multiple dynamic interactions or interactions that involve more than two components. Interactions of FlhBC with rod/hook-type substrates were strong, whereas those with filament-type substrates were very weak; this may reflect the role of FlhB in substrate specificity switching. We propose a model for the flagellar export apparatus in which FlhA and FlhB and the other four integral membrane proteins of the apparatus form a complex at the base of the flagellar motor. A soluble complex of at least three proteins (FliH, FliI and FliJ) bind the protein to be exported and then interact with the complex at the motor to deliver the protein, which is then exported in an ATP-dependent process mediated by FliI.

FliK, the protein responsible for flagellar hook length control in Salmonella, is exported during hook assembly.

In wild-type Salmonella, the length of the flagellar hook, a structure consisting of subunits of the hook protein FlgE, is fairly tightly controlled at approximately 55 nm. Because fliK mutants produce abnormally elongated hook structures that lack the filament structure, FliK appears to be involved in both the termination of hook elongation and the initiation of filament formation. FliK, a soluble protein, is believed to function together with a membrane protein, FlhB, of the export apparatus to mediate the switching of export substrate specificity (from hook protein to flagellin) upon completion of hook assembly. We have examined the location of FliK during flagellar morphogenesis. FliK was found in the culture supernatants from the wild-type strain and from flgD (hook capping protein), flgE (hook protein) and flgK (hook-filament junction protein) mutants, but not in that from a flgB (rod protein) mutant. The amount of FliK in the culture supernatant from the flgE mutant was much higher than in that from the flgK mutant, indicating that FliK is most efficiently exported prior to the completion of hook assembly. Export was impaired by deletions within the N-terminal region of FliK, but not by C-terminal truncations. A decrease in the level of exported FliK resulted in elongated hook structures, sometimes with filaments attached. Our results suggest that the export of FliK during hook assembly is important for hook-length control and the switching of export substrate specificity.

Effect of hook subunit concentration on assembly and control of length of the flagellar hook of Salmonella.

The flagellar hook of Salmonella is a filamentous polymer made up of subunits of the protein FlgE. Hook assembly is terminated when the length reaches about 55 nm. After our recent study of the effect of cellular levels of the hook length control protein FliK, we have now analyzed the effect of cellular levels of FlgE itself. When FlgE was overproduced in a wild-type strain, a fliC (flagellin) mutant, or a fliD (hook-associated protein 2 [HAP2], filament capping protein) mutant, the hooks remained at the wild-type length. In a fliK (hook length control protein) mutant, which produces long hooks (polyhooks), the overproduction of FlgE resulted in extraordinarily long hooks (superpolyhooks). In a flgK (HAP1, first hook-filament junction protein) mutant or a flgL (HAP3, second hook-filament junction protein) mutant, the overproduction of FlgE also resulted in longer than normal hooks. Thus, at elevated hook protein levels not only FliK but also FlgK and FlgL are necessary for the proper termination of hook elongation. When FlgE was severely underproduced, basal bodies without hooks were often observed. However, those hooks that were seen were of wild-type length, demonstrating that FlgE underproduction decreases the probability of the initiation of hook assembly but not the extent of hook elongation.

Substrate specificity switching of the flagellum-specific export apparatus during flagellar morphogenesis in Salmonella typhimurium.

During flagellar morphogenesis in Salmonella typhimurium, the flagellum-specific anti-sigma factor FlgM is exported out of the cells only after completion of hook assembly. In this study, we examined the export of the flagellar proteins, FlgD (hook capping protein), FlgE (hook protein), FlgK and FlgL (hook-filament junction proteins), FliD (filament capping protein), and FliC (flagellin), before and after completion of hook assembly. Like the FlgM protein, the FlgK, FlgL, FliD, and FliC proteins are exported efficiently only after completion of hook assembly. On the other hand, the FlgD and FlgE proteins are exported efficiently before, but poorly after, hook completion. These results indicate that the export properties are different between these two groups and that their export order exactly parallels the assembly order of the hook-filament structure. We propose that the substrate specificity switching occurs in the flagellum-specific export apparatus upon completion of hook assembly.

FlgD is a scaffolding protein needed for flagellar hook assembly in Salmonella typhimurium

FlgD is known to be absolutely required for hook assembly, yet it has not been detected in the mature flagellum. We have overproduced and purified FlgD and raised an antibody against it. By using this antibody, we have detected FlgD in substantial amounts in isolated basal bodies from flgA, flgE, flgH, flgI, flgK, and fliK mutants, in much smaller amounts in those from the wild type and flgL, fliA, fliC, fliD, and fliE mutants, and not at all in those from flgB, flgD, flgG, and flgJ mutants. In terms of the morphological assembly pathway, these results indicate that FlgD is first added to the structure when the rod is completed and is discarded when the hook, having reached its mature length, has the first of the hook-filament junction proteins, FlgK, added to its tip. Immunoelectron microscopy established that FlgD initially is located at the distal end of the rod and eventually is located at the distal end of the hook. Thus, it appears to act as a hook-capping protein to enable assembly of hook protein subunits, much as another flagellar protein, FliD, does for the flagellin subunits of the filament. However, whereas FliD is associated with the filament tip indefinitely, FlgD is only transiently associated with the hook tip; i.e., it acts as a scaffolding protein. When FlgD was added to the culture medium of a flgD mutant, cells gained motility; thus, although the hook cap is normally added endogenously, it can be added exogenously. When culture media were analyzed for the presence of hook protein, it was found only with the flgD mutant and, in smaller amounts, the fliK (polyhook) mutant. Thus, although FlgD is needed for assembly of hook protein, it is not needed for its export.

Localization and stoichiometry of hook-associated proteins within Salmonella typhimurium flagella.

The localization of hook-associated proteins (HAP1, HAP2, and HAP3) in Salmonella typhimurium flagella was studied by using specific antibodies together with a second antibody conjugated with colloidal gold. HAP1 and HAP3 were localized at the hook-filament junction, as has been suggested previously. HAP2, however, was localized at the filament tip. This finding supports the idea that HAP2 acts to induce polymerization of endogenous flagellin at the filament tip, and HAP1 and HAP3 are junction proteins to connect hook with filament. Analysis of the protein composition of short flagella from a mutant indicated that a single flagellum contains about 10 to 20 HAP1, 10 to 20 HAP2, and 10 to 40 HAP3 molecules.

Purification and characterization of the flagellar hook-basal body complex of Salmonella typhimurium.

The hook-basal body complex of Salmonella typhimurium, a major component of its flagellar apparatus, was subjected to detailed analysis by electron microscopy and gel electrophoresis. The study was facilitated by the development of an improved protocol for isolation of the complexes in high yield and purity. Nine proteins were identified with the structure. These proteins had apparent molecular weights of 65,000 (65K), 60K, 42K, 38K, 32K, 30K, 27K, 16K, and 14K. Small but reproducible shifts in the apparent molecular weights of specific proteins from conditionally nonflagellate mutants indicated the following gene-polypeptide correspondences: flaFV, 42K; flaFVI, 32K; flaFVII, 30K; flaFIX, 38K; flaAII.1, 65K. Several new morphological features of hook-basal body complexes were recognized, including a clawlike structure on the cytoplasm-proximal M ring and additional material at the cytoplasmic face of the M ring. Based on this study and the work of others, we suggest that the morphological features of the hook-basal body complex correspond to the following proteins: hook-filament junction, 60K; hook, 42K; rod, 30K and 32K; L ring and outer cylinder wall, 27K; P ring, 38K; S ring, unknown; M ring 65K.