Hook-associated Proteins Research Articles

Genetic and molecular characterization of the polar flagellum of Vibrio parahaemolyticus

Vibrio parahaemolyticus possesses two alternate flagellar systems adapted for movement under different circumstances. A single polar flagellum propels the bacterium in liquid (swimming), while multiple lateral flagella move the bacterium over surfaces (swarming). Energy to rotate the polar flagellum is derived from the sodium membrane potential, whereas lateral flagella are powered by the proton motive force. Lateral flagella are arranged peritrichously, and the unsheathed filaments are polymerized from a single flagellin. The polar flagellum is synthesized constitutively, but lateral flagella are produced only under conditions in which the polar flagellum is not functional, e.g., on surfaces. This work initiates characterization of the sheathed, polar flagellum. Four genes encoding flagellins were cloned and found to map in two loci. These genes, as well as three genes encoding proteins resembling HAPs (hook-associated proteins), were sequenced. A potential consensus polar flagellar promoter was identified by using upstream sequences from seven polar genes. It resembled the enterobacterial sigma 28 consensus promoter. Three of the four flagellin genes were expressed in Escherichia coli, and expression was dependent on the product of the fliA gene encoding sigma 28. The fourth flagellin gene may be different regulated. It was not expressed in E. coli, and inspection of upstream sequence revealed a potential sigma 54 consensus promoter. Mutants with single and multiple defects in flagellin genes were constructed in order to determine assembly rules for filament polymerization. HAP mutants displayed new phenotypes, which were different from those of Salmonella typhimurium and most probably were the result of the filament being sheathed.

Dual chemotaxis signaling pathways in Bacillus subtilis: a sigma D-dependent gene encodes a novel protein with both CheW and CheY homologous domains

The alternative sigma factor, sigma D, activates the expression of genes required for chemotaxis and motility in Bacillus subtilis, including those encoding flagellin, hook-associated proteins, and the motor proteins. The sigma D protein is encoded in a large operon which also encodes the structural proteins for the basal body and homologs of the enteric CheW, CheY, CheA, and CheB chemotaxis proteins. We report the identification and molecular characterization of a novel chemotaxis gene, cheV. The predicted CheV gene product contains an amino-terminal CheW homologous domain linked to a response regulator domain of the CheY family, suggesting that either or both of these functions are duplicated. Transcription of cheV initiates from a sigma D-dependent promoter element both in vivo and in vitro, and expression of a cheV-lacZ fusion is completely dependent on sigD. Expression is repressed by nonpolar mutations in structural genes for the basal body, fliM or fliP, indicating that cheV belongs to class III in the B. subtilis flagellar hierarchy. The cheV locus is monocistronic and is located at 123 degrees on the B. subtilis genetic map near the previously defined cheX locus. A cheV mutant strain is motile but impaired in chemotaxis on swarm plates. Surprisingly, an insertion in the CheW homologous domain leads to a more severe defect than an insertion in the CheY homologous domain. The presence of dual pathways for chemotactic signal transduction is consistent with the residual signaling observed in previous studies of cheW mutants (D. W. Hanlon, L. Márques-Magaña, P. B. Carpenter, M. J. Chamberlin, and G. W. Ordal, J. Biol. Chem. 267:12055-12060, 1992).

A Mutant Hook-associated Protein (HAP3) Facilitates Torsionally Induced Transformations of the Flagellar Filament of Escherichia coli

Two mutants with defects in hook-associated protein 3 (HAP3) were isolated that exhibit impaired swimming only when they interact with a solid surface or a semisolid matrix. Motility and chemotaxis were normal in liquid media, even in media containing viscous agents, but cells failed to swarm in 0·28% agar. Mutants appeared to carry a full complement of flagella of normal configuration and length. However, filaments rotating counterclockwise close to a glass surface transformed from normal to straight, while filaments rotating clockwise transformed from curly to straight. Both transformations propagated from base to tip, as expected if torsionally induced. The mutations mapped to the middle of flgL, the structural gene for HAP3, and sequence analysis revealed the same coding change in both mutants: a substitution of cysteine for arginine 168. Our results show that the ability of a filament composed of normal flagellin subunits to resist mechanical stress depends on the structure of the protein (HAP3) to which is attached at its base. The N-terminal sequence of HAP3 was found to be similar to the N-terminal sequence of flagellin, and the possibility that it provides a nucleation site for the C-terminal region of flagellin is discussed.

Flagellar Growth in a Filament-Less Salmonella fliD Mutant Supplemented with Purified Hook-Associated Protein 2

Bacterial flagellum consists of a basal body, a hook, HAP1 (hook-associated protein 1), HAP3, a long helical filament, and a cap (composed of HAP2), all connected in series. The mutant deficient in the HAP2 structural gene (fliD) of Salmonella typhimurium has flagella composed of only hook-HAP1-HAP3 and excretes flagellin monomers into the culture medium. However, when purified HAP2 was added to this mutant, the flagellin stopped leaking out and flagellar filaments grew. Turnover of HAP2 was not necessary for the growth of a filament. Therefore HAP2 facilitates the polymerization of endogenous flagellin, apparently without falling off the filament tip. This experimental system with exogenous HAP2 allowed us to synchronize filament growth; the average rate of filament growth can be estimated by measuring the length of grown filaments at various time periods in electron micrographs. The initial growth rate was about 30 nm/min, which corresponds to one flagellin per second.

Identification of genes encoding components of the swarmer cell flagellar motor and propeller and a sigma factor controlling differentiation of Vibrio parahaemolyticus

Vibrio parahaemolyticus possesses two distinct motility systems, the polar system used for swimming in liquid environments and the lateral system used for swarming over surfaces. Growth on surfaces induces swarmer cell differentiation and expression of the lateral motility system. Mutants, created by transposon mutagenesis of a clone expressing lateral flagellin and gene disruption in V. parahaemolyticus, were unable to swarm and failed to make lateral flagellin; therefore, unlike the case for the polar system, there is one gene (lafA) encoding lateral flagellin. In addition to lafA, other genes required for swarming but not for swimming were identified by gene replacement mutagenesis. The nucleotide sequence of the clone determined open reading frames (ORFs) and deduced amino acid sequences showed similarities to flagellar components of other bacteria: flagellin, hook-associated protein (HAP2), motor components, and flagellar sigma factor (sigma 28). Many sigma 28 factors have been shown to recognize cognate promoters; however, expression of lafA in Escherichia coli required LafS, and E. coli sigma 28 did not substitute. Also, there were no sequences preceding genes encoding flagellin or HAP2 resembling the sigma 28 consensus promoter. The product of the sigma-like gene seems to be a unique member of the sigma 28 cluster. It appears the result of requiring expression for immunodetection of flagellin clones was that the sigma locus was fortuitously cloned, since the sigma and lafA loci were not contiguous in the chromosome. This work initiates identification and placement of genes in a scheme of control for swarmer cell differentiation; three levels have been identified in the transcriptional hierarchy.

Evolutionary origin and radiation of the avian-adapted non-motile salmonellae

Multilocus enzyme electrophoresis was employed to estimate chromosomal genotypic diversity and relationships among 131 isolates of the non-motile Salmonella biotypes Gallinarum and Pullorum (serotype 1, 9, 12:-:-) that cause fowl typhoid and pullorum disease, respectively. Thirteen electrophoretic types (ETs), marking clones, were distinguished, and construction of a neighbour-joining phylogenetic tree revealed three lineages: one consisted of five ETs of Gallinarum, a second included seven ETs of Pullorum, and a third was represented by a single ET (Ga/Pu 1) that is intermediate between those of the other two lineages in both multilocus enzyme genotype and biochemical properties. Enzyme genotype analysis and comparative nucleotide sequencing of the phase 1 flagellin gene (fliC), the hook-associated protein 1 gene (flgK), and the 6-phosphogluconate dehydrogenase gene (gnd) identified serotype Enteritidis (1, 9, 12:g, m:-) as a close relative of the non-motile salmonellae. In most strains of biotype Gallinarum, the fliC gene is complete, intact and identical in sequence to that of Enteritidis, but isolates of three ETs had a stop codon at position 495. The fliC sequences of the ETs of Pullorum differed from that of Enteritidis in having non-synonymous changes in either two or three codons and a synonymous change in one codon. The sharing of distinctive alleles at three metabolic enzyme loci and a stop codon in flgK indicates that the non-motile salmonellae are monophyletic and that their most recent common ancestor was non-motile. Since diverging from that ancestor, the Pullorum lineage has evolved more rapidly than the Gallinarum and Ga/Pu 1 lineages.

Restoration of motility to an Escherichia coli fliA flagellar mutant by a Bacillus subtilis sigma factor.

The activation of additional promoter sites by production of an alternative sigma subunit for RNA polymerase is a common strategy for the coordinate regulation of gene expression. Many alternative sigma factors control genes for specialized, and often narrowly distributed, functions. For example, most of the alternative sigma factors in Bacillus subtilis control genes necessary for endospore formation. In contrast, the B. subtilis sigma D protein controls the expression of genes important for flagellar-based motility and chemotaxis, a form of locomotion very broadly distributed in the eubacteria. A homologous sigma factor, sigma F, controls a similar group of motility genes in the enteric bacteria. The conservation of both promoter specificity and genetic function in these two regulons allowed us to test the ability of a B. subtilis sigma factor to function within an Escherichia coli host. We demonstrate that expression of the B. subtilis sigD gene restores motility to an E. coli strain mutant in the fliA locus encoding the sigma F factor. This result suggests that the B. subtilis sigma D protein can bind to the E. coli core RNA polymerase to direct transcription initiation from at least four of the late operon promoters, thereby leading to the synthesis of flagellin, motor, and hook-associated proteins. Conversely, expression of sigma D protein in a normally chemotactic strain of E. coli (fliA+) leads to a hyperflagellated, nonchemotactic phenotype.

Negative regulatory loci coupling flagellin synthesis to flagellar assembly in Salmonella typhimurium

The complex regulation of flagellin gene expression in Salmonella typhimurium was characterized in vivo by using lac transcriptional fusions to the two flagellin structural genes (fliC [H1] and fljB [H2]). Phase variation was measured as the rate of switching of flagellin gene expression. Switching frequencies varied from 1/500 per cell per generation to 1/10,000 per cell per generation depending on the particular insertion and the direction of switching. There is a 4- to 20-fold bias in favor of switching from the fljB(On) to the fljB(Off) orientation. Random Tn10dTc insertions were isolated which failed to express flagellin. While most of these insertions mapped to loci known to be required for flagellin expression, several new loci were identified. The presence of functional copies of all of the genes responsible for complete flagellar assembly, except the hook-associated proteins (flgK, flgL, and fliD gene products), were required for expression of the fliC or fljB flagellin genes. Two novel loci involved in negative regulation of fliC and fljB in fla mutant backgrounds were identified. One of these loci, designated the flgR locus, mapped to the flg operon at 23 min on the Salmonella linkage map. An flgR insertion mutation resulted in relief of repression of the fliC and fljB genes in all fla mutant backgrounds except for mutants in the positive regulatory loci (flhC, flhD, and fliA genes).

Flagellar hook and hook-associated proteins of Salmonella typhimurium and their relationship to other axial components of the flagellum

Within the bacterial flagellum the basal-body rod, the hook, the hook-associated proteins (HAPs), and the helical filament constitute an axial substructure whose elements share structural features and a common export pathway. We present here the amino acid sequences of the hook protein and the three HAPs of Salmonella typhimurium, as deduced from the DNA sequences of their structural genes (flgE, flgK, flgL and fliD, respectively). We compared these sequences with each other and with those for the filament protein (flagellin) and four rod proteins, which have been described previously (Joys, 1985; Homma et al., 1990; Smith & Selander, 1990). Hook protein most strongly resembled the distal rod protein (FlgG) and the proximal HAP (HAP1), which are thought to be attached to the proximal and distal ends of the hook, respectively; the similarities were most pronounced near the N and C termini. Hook protein and flagellin, which occupy virtually identical helical lattices, did not resemble each other strongly but showed some limited similarities near their termini. HAP3 and HAP2, which form the proximal and distal boundaries of the filament, showed few similarities to flagellin, each other, or the other axial proteins. With the exceptions of the N-terminal region of HAP2, and the C-terminal region of flagellin, proline residues were absent from the terminal regions of the axial proteins. Moreover, with the exception of the N-terminal region of HAP2, the terminal regions contained hydrophobic residues at intervals of seven residues. Together, these observations suggest that the axial proteins may have amphipathic alpha-helical structure at their N and C termini. In the case of the filament and the hook, the terminal regions are believed to be responsible for the quaternary interactions between subunits. We suggest that this is likely to be true of the other axial structures as well, and specifically that interaction between N-terminal and C-terminal alpha-helices may be important in the formation of the axial structures of the flagellum. Although consensus sequences were noted among some of the proteins, such as the rod, hook and HAP1, no consensus extended to the entire set of axial proteins. Thus the basis for recognition of a protein for export by the flagellum-specific pathway remains to be identified.

Stoichiometric analysis of the flagellar hook-(basal-body) complex of Salmonella typhimurium

The stoichiometries of components within the flagellar hook-(basal-body) complex of Salmonella typhimurium have been determined. The hook protein (FlgE), the most abundant protein in the complex, is present at approximately 130 subunits. Hook-associated protein 1 (FlgK) is present at approximately 12 subunits. The distal rod protein (FlgG) is present at approximately 26 subunits, while the proximal rod proteins (FlgB, FlgC and FlgF) are present at only approximately six subunits each. The stoichiometries of the proximal rod proteins and hook-associated protein 1 are, within experimental error, consistent with values of 5 or 6, and 11, respectively. Such values would correspond to either one or two turns of a helical structure with a basic helix of approximately 5.5 subunits per turn, which is the geometry of both the hook and the filament and, one supposes, the rod and hook-associated proteins. These stoichiometries may derive from rules for the heterologous interactions that occur when a helical structure consists of successive segments constructed from different proteins; the stoichiometries within the hook and the distal portion of the rod must, however, be set by different mechanisms. The stoichiometries for the ring proteins are approximately 26 subunits each for the M-ring protein (FliF), the P-ring protein (FlgI), and the L-ring protein (FlgH); the protein responsible for the S-ring feature is not known. The rings presumably have rotational rather than helical symmetry, in which case the stoichiometries would be directly constrained by the intersubunit bonding angle. The ring stoichiometries are discussed in light of other information concerning flagellar structure and function.

Flagellar assembly in Salmonella typhimurium: analysis with temperature-sensitive mutants

The process of flagellar assembly in Salmonella typhimurium was investigated by using temperature-sensitive mutants. The mutants were grown at the restrictive temperature and then at the permissive temperature, with radiolabel supplied in the first phase of the experiment and not the second, or vice versa. Flagellar hook-basal body complexes were then purified and analyzed by gel electrophoresis and autoradiography. The extent to which a given protein was labeled in the two phases of the experiment provided information as to whether it preceded or followed the block caused by the mutant protein. We conclude the following concerning flagellar assembly. The M-ring protein (FliF) is stably incorporated in the earliest stage detected, along with two previously unknown proteins, with apparent molecular masses of 23 and 26 kilodaltons, respectively, and possibly one of the switch components, FliG. Independent of that event and all other events, the P-ring and L-ring proteins (FlgI and FlgH) are synthesized and exported to the periplasm and outer membrane by the primary cellular export pathway. Rod assembly occurs by export (via the flagellum-specific pathway) of subunits of four proteins, FlgB, FlgC, FlgF, and FlgG, and their incorporation, probably in that order, into the rod structure; this stage requires the flhA and fliI genes, perhaps because they encode part of the export apparatus. Once rod assembly is complete, the FlgI and FlgH proteins assemble around the rod to form the P and L rings. The rod structure, which is only metastable while it is being constructed, becomes stable upon P-ring addition. Export (via the flagellum-specific pathway) and assembly of hook protein, hook-associated proteins, and filament protein then occur successively. A number of flagellar proteins, whose genetic origin and structural role are not yet known, were identified on the basis of their dependence on the flagellar master operon for expression.

Total reconstitution of Salmonella flagellar filaments from hook and purified flagellin and hook-associated proteins in vitro

Salmonella flagellar filaments comprise the following distinct parts connected in series: a curved hook composed of a single kind of subunit (hook protein); two short segments made up of hook-associated proteins (HAP1 and HAP3); a long helical filament composed of flagellin; and a cap composed of HAP2. In this study, a procedure was developed to isolate HAPs from the culture medium of a short-flagella mutant. We demonstrate that hook-filament complex can be formed in vitro by sequential addition of HAP1, HAP3 and flagellin to hook fragments.

The organization of the Caulobacter crescentus flagellar filament

The structural organization of the flagellar filament of Caulobacter crescentus, as revealed by immunoelectron microscopy, shows five antigenically distinct regions within the hook-filament complex. The first region is the hook. The second region is adjacent to the hook and is approximately 10 nm in length. On the basis of its location in the hook-filament complex, this region may contain hook-associated proteins. Next to this is the third region, which is approximately 60 nm in length. Antibody decoration experiments using mutant strains with deletions of the structural gene for the 29 × 10 3 M r flagellin ( flgJ) showed that the presence of this region is correlated with the expression of the 29 × 10 3 M r flagellin gene. The next region (region IV), of length ~1 to 2 μm, appears to contain the 27·5 × 10 3 M r flagellin, but at its distal end includes, in gradually increasing amounts, the 25 × 10 3 M r, flagellin. The rest of the filament (region V) is made up predominantly, if not completely, of the 25 × 10 3 M r flagellin. Except for the hook, there are no morphological features that would otherwise distinguish these regions. A functional flagellum, having the wild-type length and morphology, is assembled by mutant strains deficient in the 29 × 10 3 M r flagellin and 27·5 × 10 3 M r flagellin.

Localization and stoichiometry of hook-associated proteins within Salmonella typhimurium flagella.

The localization of hook-associated proteins (HAP1, HAP2, and HAP3) in Salmonella typhimurium flagella was studied by using specific antibodies together with a second antibody conjugated with colloidal gold. HAP1 and HAP3 were localized at the hook-filament junction, as has been suggested previously. HAP2, however, was localized at the filament tip. This finding supports the idea that HAP2 acts to induce polymerization of endogenous flagellin at the filament tip, and HAP1 and HAP3 are junction proteins to connect hook with filament. Analysis of the protein composition of short flagella from a mutant indicated that a single flagellum contains about 10 to 20 HAP1, 10 to 20 HAP2, and 10 to 40 HAP3 molecules.

Assembly of bacterial flagellar filaments : A new aspect.

A bacterial flagellar filament was found composed of the following elements arranged in series: the hook, two kinds of hook-associated proteins, the main filament composed of flagellin, and a "cap" at the tip. The entire flagellar filaments could be reconstituted in vitro from purified proteins.

In vitro reconstitution of flagellar filaments onto hooks of filamentless mutants of Salmonella typhimurium by addition of hook-associated proteins.

An in vitro system for reconstituting flagellar filaments onto hooks of filamentless mutants of Salmonella typhimurium was used to investigate the role played in filament formation by the three hook-associated proteins (HAPs, products of the flaW, flaU, and flaV genes). These proteins--FlaW, FlaU, and FlaV--are believed to be assembled in this order at the distal end of the hook. When the recipient hooks were provided by flaU mutants, whose hook tips contained FlaW only, exogenous FlaU was essential for polymerization of both exogenous and endogenous flagellin, whereas exogenous FlaV inhibited such polymerization. When the recipients were flaV-mutant hooks, whose tips contained FlaW and FlaU but not FlaV, exogenous FlaV inhibited polymerization of exogenous flagellin. FlaV also inhibited polymerization of exogenous flagellin at the tips of filament fragments. In contrast, FlaV was essential for polymerization of endogenous flagellin onto flaV-mutant hooks, and onto short filaments that had been made (in the absence of FlaV) by polymerization of exogenous flagellin on the tips of flaV-mutant hooks. These results suggest that FlaV acts not only at the tip of the hook to initiate growth of the filament, but also at the tip of the growing filament, and that FlaV is essential for polymerization of endogenous flagellin--i.e., for the normal process of filament assembly in vivo.

Excretion of unassembled hook-associated proteins by Salmonella typhimurium.

Hook-associated proteins (HAPs) were excreted into the culture medium of the Fla+ strain as well as into the growth medium of the filamentless mutants of Salmonella typhimurium. This indicates that the bacteria synthesize HAPs excessively, beyond the amount required for construction of flagella. The extra HAPs are shed into the culture medium after a definite amount of each HAP has been assembled into the flagellar structure.

Structural genes for flagellar hook-associated proteins in Salmonella typhimurium

The flaW, flaU, and flaV genes of Salmonella typhimurium LT2 were cloned into pBR322. These genes were mapped on the cloned DNA fragments by restriction endonuclease analysis and construction of the deletion derivatives. Their gene products were identified, by the minicell method, as proteins whose molecular weights were estimated to be 59,000 for the flaW product, 31,000 for the flaU product, and 48,000 for the flaV product. These values are identical to those of three species of hook-associated proteins (HAPs), namely, HAP1, HAP3, and HAP2. Furthermore, antibodies against HAP1, HAP3, and HAP2 specifically reacted with the gene products of flaW, flaU, and flaV, respectively. Therefore, we concluded that they are structural genes for HAPs. The antibodies against HAP1 and HAP3 also specifically reacted with the gene products of flaS and flaT of Escherichia coli, respectively. This indicates that these gene products are HAPs in E. coli. This result is consistent with the demonstration that flaS and flaT of E. coli are functionally homologous with flaW and flaU of S. typhimurium.

Locations of hook-associated proteins in flagellar structures of Salmonella typhimurium.

Hooks of the flagella of Salmonella typhimurium were purified from an flaL mutant. Hook-associated proteins, namely HAP1, HAP2, and HAP3, were separated from them, and the antibody against each HAP was prepared. By immunoelectron microscopic observation, these three kinds of antiHAP antibodies were found to bind on the distal ends of hooks of filamentless mutants consistently with their composition of HAPs. The antiHAP2 antibody bound to the very tops of the claw-shaped ends of the hooks which contain all three HAPS. The antibodies against HAP1 and HAP3 bound to the basal areas and the middle areas, respectively, of the claw-shaped ends. The order of disassembly of the component proteins by heat treatment of the hook structure from the filamentless mutants was (HAP2, HAP3) greater than HAP1 greater than hook protein. These observations were consistent with our layered structure model: HAP1, HAP3, and HAP2 are assembled at the distal end of the hook in this sequence. All three HAPs were detected in the hook-filament complexes prepared from a flagellate strain. When the hook-filament structure was treated with antibody against HAP1 and with the anti-rabbit immunoglobulin G antibody, the antibody aggregate was observed in the region corresponding to the boundary between filament and hook. This observation strongly suggests that HAP1 is the protein connecting filament with hook. The locations of HAP2 and HAP3 in the hook-filament structure were not clarified with the same procedure.

Excretion of unassembled flagellin by Salmonella typhimurium mutants deficient in hook-associated proteins.

Of the flagellar filamentless mutants of Salmonella typhimurium, the flaV, flaU, and flaW mutants, which are defective in hook-associated proteins, synthesized flagellin molecules, but flagella did not polymerize at the tips of the mutant hooks and were excreted into the culture medium as intact monomers.