Homologous Lipases Research Articles

Shifting the pH profiles of Staphylococcus epidermidis lipase (SEL) and Staphylococcus hyicus lipase (SHL) through generating chimeric lipases by DNA shuffling strategy.

Enzymes are often required to function in a particular reaction condition by the industrial procedure. In order to identify critical residues affecting the optimum pH of Staphylococcal lipases, chimeric lipases from homologous lipases were generated via a DNA shuffling strategy. Chimeric 1 included mutations of G166S, K212E, T243A, H271Y. Chimeric 2 consisted of substitutions of K212E, T243A, H271Y. Chimeric 3 contained substitutions of K212E, R359L. From the screening results, the pH profiles for chimeric 1 and 2 lipases were shifted from pH 7 to 6. While the pH of chimeric 3 was shifted to 8. It seems the mutation of K212E in chimeric 1 and 2 decreased the pH to 6 by changing the electrostatic potential surface. Furthermore, chimeric 3 showed 10 ˚C improvement in the optimum temperature due to the rigidification of the catalytic loop through the hydrophobic interaction network. Moreover, the substrate specificity of chimeric 1 and 2 was increased towards the longer carbon length chains due to the mutation of T243A adjacent to the lid region through increasing the flexibility of the lid. Current study illustrated that directed evolution successfully modified lipase properties including optimum pH, temperature and substrate specificity through mutations, especially near catalytic and lid regions.

Purification, identification, characterization and catalytic mechanism of two lipases from rice bran (Oryza sativa)

The efficient utilization of rice bran is severely impeded because of the rapid rancidity caused by rice bran lipase, so the investigation of rice bran lipase characteristic and catalytic mechanism was urgently required. The extracted crude proteins from rice bran were purified to obtain two lipases with 16.31 times of purification fold and 10.64% of purification yield. The molecular masses of these two homologous lipases were 34929.00 Da and 34072.00 Da, respectively. Rice bran lipase showed highest catalytic activity at 40.00 °C, pH 7.50 and held good stability below 50.00 °C and at pH 7.00–7.50. Most metal ions (except Na+ and Co+) and organic solvents had significant inhibition effect (P < 0.05) on the purified lipase activity. Surfactants like Tween 80, Triton 100 and sodium dodecyl sulfonate (SDS) decreased the lipase activities significantly (P < 0.05) to 70.88%, 80.08% and 73.74% respectively and cetyltrimethyl ammonium bromide (CTAB) increased the catalytic activity significantly (P < 0.05) to 109.00%. The Ser-His-Asp residues were speculated to be the catalytic center of purified lipases by using the inhibitors (Phenylmethanesulfonyl fluoride (PMSF), diethylpyrocarbonate (DEPC) and Pepstatin) which aimed at specific amino acids and then verified by molecular docking. Therefore, blocking or destroying the Ser-His-Asp catalytic triad might be new choices to restrain the rancidity of rice bran.

Galactolipase activity of Talaromyces thermophilus lipase on galactolipid micelles, monomolecular films and UV-absorbing surface-coated substrate

Talaromyces thermophilus lipase (TTL) was found to hydrolyze monogalactosyl diacylglycerol (MGDG) and digalactosyl diacylglycerol (DGDG) substrates presented in various forms to the enzyme. Different assay techniques were used for each substrate: pHstat with dioctanoyl galactolipid-bile salt mixed micelles, barostat with dilauroyl galactolipid monomolecular films spread at the air-water interface, and UV absorption using a novel MGDG substrate containing α-eleostearic acid as chromophore and coated on microtiter plates. The kinetic properties of TTL were compared to those of the homologous lipase from Thermomyces lanuginosus (TLL), guinea pig pancreatic lipase-related protein 2 and Fusarium solani cutinase. TTL was found to be the most active galactolipase, with a higher activity on micelles than on monomolecular films or surface-coated MGDG. Nevertheless, the UV absorption assay with coated MGDG was highly sensitive and allowed measuring significant activities with about 10 ng of enzymes, against 100 ng to 10 μg with the pHstat. TTL showed longer lag times than TLL for reaching steady state kinetics of hydrolysis with monomolecular films or surface-coated MGDG. These findings and 3D-modelling of TTL based on the known structure of TLL pointed out to two phenylalanine to leucine substitutions in TTL, that could be responsible for its slower adsorption at lipid-water interface. TTL was found to be more active on MGDG than on DGDG using both galactolipid-bile salt mixed micelles and galactolipid monomolecular films. These later experiments suggest that the second galactose on galactolipid polar head impairs the enzyme adsorption on its aggregated substrate.

Characterization of a Novel Alkalophilic Lipase From Aneurinibacillus thermoaerophilus: Lid Heterogeneity and Assignment to Family I.5.

Recent investigations of Aneurinibacillus thermoaerophilus strains have allowed identification of a unique solvent tolerant lipase, distinct from known lipases. This work reports the expression and purification of this lipase (LipAT) and the first characterization of its structure and temperature and pH-dependent behaviour. LipAT has a secondary structural content compatible with the canonical lipase α/β hydrolase fold, and is dimeric at neutral pH. The protein was folded from pH 5 to 10, and association into folded aggregates at pH 7 and 8 likely protected its secondary structures from thermal unfolding. The enzyme was active from 25 to 65°C under neutral pH, but its maximal activity was detected at pH 10 and 45°C. The ability of LipAT to recover from high temperature was investigated. Heating at 70°C and pH 10 followed by cooling prevented the restoration of activity, while similar treatments performed at pH 8 (where folded aggregates may form) allowed recovery of 50% of the initial activity. In silico analyses revealed a high conservation (85% or more) for the main lipase signature sequences in LipAT despite an overall low residue identity (60% identity compared to family I.5 lipases). In contrast, the active site lid region in LipAT is very distinct showing only 25% amino acid sequence identity to other homologous lipases in this region. Comparison of lids among lipases from the I.5 family members and LipAT reveals that this region should be a primary target for elucidation, optimisation and prediction of structure-function relationships in lipases.

Activity-independent screening of secreted proteins using split GFP

The large-scale industrial production of proteins requires efficient secretion, as provided, for instance, by the Sec system of Gram-positive bacteria. Protein engineering approaches to optimize secretion often involve the screening of large libraries, e.g. comprising a target protein fused to many different signal peptides. Respective high-throughput screening methods are usually based on photometric or fluorimetric assays enabling fast and simple determination of enzymatic activities. Here, we report on an alternative method for quantification of secreted proteins based on the split GFP assay. We analyzed the secretion by Bacillus subtilis of a homologous lipase and a heterologous cutinase by determination of GFP fluorescence and enzyme activity assays. Furthermore, we identified from a signal peptide library a variant of the biotechnologically relevant B. subtilis protein swollenin EXLX1 with up to 5-fold increased secretion. Our results demonstrate that the split GFP assay can be used to monitor secretion of enzymatic and non-enzymatic proteins in B. subtilis in a high-throughput manner.

Characterization of a cold-active and salt tolerant esterase identified by functional screening of Arctic metagenomic libraries.

BackgroundThe use of metagenomics in enzyme discovery constitutes a powerful approach to access to genomes of unculturable community of microorganisms and isolate novel valuable biocatalysts for use in a wide range of biotechnological and pharmaceutical fields.ResultsHere we present a novel esterase gene (lip3) identified by functional screening of three fosmid metagenomic libraries, constructed from three marine sediment samples. The sequenced positive fosmid revealed an enzyme of 281 amino acids with similarity to class 3 lipases. The 3D modeling of Lip3 was generated by homology modeling on the basis of four lipases templates [PDB ID: 3O0D, 3NGM, 3G7N, 2QUB] to unravel structural features of this novel enzyme. The catalytic triad of Lip3 was predicted to be Asp207, His267 and the catalytic nucleophile Ser150 in a conserved pentapeptide (GXSXG). The 3D model highlighted the presence of a one-helix lid able to regulate the access of the substrate to the active site when the enzyme binds a hydrophobic interface. Moreover an analysis of the external surface of Lip3 model showed that the majority of the surface regions were hydrophobic (59.6 %) compared with homologous lipases (around 35 %) used as templates. The recombinant Lip3 esterase, expressed and purified from Escherichia coli, preferentially hydrolyzed short and medium length p-nitrophenyl esters with the best substrate being p-nitrophenyl acetate. Further characterization revealed a temperature optimum of 35 °C and a pH optimum of 8.0. Lip3 exhibits a broad temperature stability range and tolerates the presence of DTT, EDTA, PMSF, β-mercaptoethanol and high concentrations of salt. The enzyme was also highly activated by NaCl.ConclusionsThe biochemical characterization and homology model reveals a novel esterase originating from the marine Arctic metagenomics libraries with features of a cold-active, relatively thermostable and highly halotolerant enzyme. Taken together, these results suggest that this esterase could be a highly valuable candidate for biotechnological applications such as organic synthesis reactions and cheese ripening processes.Electronic supplementary materialThe online version of this article (doi:10.1186/s12858-016-0057-x) contains supplementary material, which is available to authorized users.

Sequence‐based proline incorporation improves the thermostability of Candida albicans lipase Lip5

Increasing kinetic stability of industrial enzymes is a key objective of protein engineering. In this study, a cold‐active Candida albicans lipase Lip5 was selected as a model to improve its stability. With no 3D structure available, multiple‐sequence alignment of homologous lipases with different kinetic stabilities in the same superfamily was used to identify the mostly likely positions relevant to protein stability; these positions (V39, I52, and I290) were selected for proline incorporation in Lip5 as a strategy to increase the protein stability. Of the mutants generated, two of them (V39P and I290P) displayed a twofold increase in kinetic stability and improved thermodynamic stability as well. None of the mutants exhibited secondary or tertiary structure changes as shown by circular dichroism and fluorescence spectroscopy analyses. These results demonstrate that in the absence of 3D structure, multiple‐sequence alignment could be a useful tool to direct proline incorporation for lipase stability engineering.Practical applications: In the absence of a 3D structure, multiple‐sequence alignment‐based proline incorporation is a useful tool to engineer lipase towards improved stability.The kinetic stability of Lip5 and mutants showed that t1/2 values of mutants V39P and I290P were approximately twice as high as that of the wild type. The ΔΔGs of these two mutants increased by 2.35 and 2.03 KJ/mol, respectively, compared with wild type, suggesting higher energy barriers against thermal inactivation for V39P and I290P. Proline incorporation at position 39 or 290 increases the kinetic stability of Lip5.

Homologous yeast lipases/acyltransferases exhibit remarkable cold-active properties.

Lipases/acyltransferases catalyse acyltransfer to various nucleophiles preferentially to hydrolysis even in aqueous media with high thermodynamic activity of water (a w >0.9). Characterization of hydrolysis and acyltransfer activities in a large range of temperature (5 to 80 °C) of secreted recombinant homologous lipases of the Pseudozyma antarctica lipase A superfamily (CaLA) expressed in Pichia pastoris, enlighten the exceptional cold-activity of two remarkable lipases/acyltransferases: CpLIP2 from Candida parapsilosis and CtroL4 from Candida tropicalis. The activation energy of the reactions catalysed by CpLIP2 and CtroL4 was 18-23 kJ mol(-1) for hydrolysis and less than 15 kJ mol(-1) for transesterification between 5 and 35 °C, while it was respectively 43 and 47 kJ mol(-1) with the thermostable CaLA. A remarkable consequence is the high rate of the reactions catalysed by CpLIP2 and CtroL4 at very low temperatures, with CpLIP2 displaying at 5 °C 65 % of its alcoholysis activity and 45 % of its hydrolysis activity at 30 °C. These results suggest that, within the CaLA superfamily and its homologous subgroups, common structural determinants might allow both acyltransfer and cold-active properties. Such biocatalysts are of great interest for the efficient synthesis or functionalization of temperature-sensitive lipid derivatives, or more generally to lessen the environmental impact of biocatalytic processes.

Essential Role of Gly33 in a Novel Organic Solvent-Tolerant Lipase from Serratia marcescens ECU1010 as Determined by Site-Directed Mutagenesis

A novel lipase lipB from Serratia marcescens ECU1010 is highly stable in the presence of organic solvents. By sequence and structure comparison with homologous lipase lipA, three amino acid residues were found to be different between them. To identify the residues which increase the organic solvent stability of lipB, residues that potentially provide this stability were mutated to the ones of lipA at equivalent positions. The replacement of Gly at position 33 by Asp obviously decreased its stability in organic solvents. Molecular modeling and structural analysis also suggested that the Gly33 residue is important for the organic solvent stability of lipB.

Design and synthesis of boronic acid inhibitors of endothelial lipase

Endothelial lipase (EL) and lipoprotein lipase (LPL) are homologous lipases that act on plasma lipoproteins. EL is predominantly a phospholipase and appears to be a key regulator of plasma HDL-C. LPL is mainly a triglyceride lipase regulating (V)LDL levels. The existing biological data indicate that inhibitors selective for EL over LPL should have anti-atherogenic activity, mainly through increasing plasma HDL-C levels. We report here the synthesis of alkyl, aryl, or acyl-substituted phenylboronic acids that inhibit EL. Many of the inhibitors evaluated proved to be nearly equally potent against both EL and LPL, but several exhibited moderate to good selectivity for EL.

Identification of a putative triacylglycerol lipase from papaya latex by functional proteomics

Latex from Caricaceae has been known since 1925 to contain strong lipase activity. However, attempts to purify and identify the enzyme were not successful, mainly because of the lack of solubility of the enzyme. Here, we describe the characterization of lipase activity of the latex of Vasconcellea heilbornii and the identification of a putative homologous lipase from Carica papaya. Triacylglycerol lipase activity was enriched 74-fold from crude latex of Vasconcellea heilbornii to a specific activity (SA) of 57 μmol·min(-1)·mg(-1) on long-chain triacylglycerol (olive oil). The extract was also active on trioctanoin (SA = 655 μmol·min(-1)·mg(-1) ), tributyrin (SA = 1107 μmol·min(-1)·mg(-1) ) and phosphatidylcholine (SA = 923 μmol·min(-1)·mg(-1) ). The optimum pH ranged from 8.0 to 9.0. The protein content of the insoluble fraction of latex was analyzed by electrophoresis followed by mass spectrometry, and 28 different proteins were identified. The protein fraction was incubated with the lipase inhibitor [(14) C]tetrahydrolipstatin, and a 45 kDa protein radiolabeled by the inhibitor was identified as being a putative lipase. A C. papaya cDNA encoding a 55 kDa protein was further cloned, and its deduced sequence had 83.7% similarity with peptides from the 45 kDa protein, with a coverage of 25.6%. The protein encoded by this cDNA had 35% sequence identity and 51% similarity to castor bean acid lipase, suggesting that it is the lipase responsible for the important lipolytic activities detected in papaya latex.

Structure of the Alkalohyperthermophilic Archaeoglobus fulgidus Lipase Contains a Unique C-Terminal Domain Essential for Long-Chain Substrate Binding

Several crystal structures of AFL, a novel lipase from the archaeon Archaeoglobus fulgidus, complexed with various ligands, have been determined at about 1.8 Å resolution. This enzyme has optimal activity in the temperature range of 70–90 °C and pH 10–11. AFL consists of an N-terminal α/β-hydrolase fold domain, a small lid domain, and a C-terminal β-barrel domain. The N-terminal catalytic domain consists of a 6-stranded β-sheet flanked by seven α-helices, four on one side and three on the other side. The C-terminal lipid binding domain consists of a β-sheet of 14 strands and a substrate covering motif on top of the highly hydrophobic substrate binding site. The catalytic triad residues (Ser136, Asp163, and His210) and the residues forming the oxyanion hole (Leu31 and Met137) are in positions similar to those of other lipases. Long-chain lipid is located across the two domains in the AFL–substrate complex. Structural comparison of the catalytic domain of AFL with a homologous lipase from Bacillus subtilis reveals an opposite substrate binding orientation in the two enzymes. AFL has a higher preference toward long-chain substrates whose binding site is provided by a hydrophobic tunnel in the C-terminal domain. The unusually large interacting surface area between the two domains may contribute to thermostability of the enzyme. Two amino acids, Asp61 and Lys101, are identified as hinge residues regulating movement of the lid domain. The hydrogen-bonding pattern associated with these two residues is pH dependent, which may account for the optimal enzyme activity at high pH. Further engineering of this novel lipase with high temperature and alkaline stability will find its use in industrial applications.

Aspergillus niger lipase: Heterologous expression in Pichia pastoris, molecular modeling prediction and the importance of the hinge domains at both sides of the lid domain to interfacial activation

Aspergillus niger lipase (ANL) is an important biocatalyst in the food processing industry. However, there is no report of its detailed three-dimensional structure because of difficulties in crystallization. In this article, based on experimental data and bioinformational analysis results, the structural features of ANL were simulated. Firstly, two recombinant ANLs expressed in Pichia pastoris were purified to homogeneity and their corresponding secondary structure compositions were determined by circular dichroism spectra. Secondly, the primary structure, the secondary structure and the three-dimensional structure of ANL were modeled by comparison with homologous lipases with known three-dimensional structures using the BioEdit software, lipase engineering database (http://www.led.uni-stuttgart.de/), PSIPRED server and SwissModel server. The predicted molecular structure of ANL presented typical features of the alpha/beta hydrolase fold including positioning of the putative catalytic triad residues and the GXSXG signature motif. Comparison of the predicted three-dimensional structure of ANL with the X-ray three-dimensional structure of A. niger feruloyl esterase showed that the functional difference of interfacial activation between lipase and esterase was concerned with the difference in position of the lid. Our three-dimensional model of ANL helps to modify lipase structure by protein engineering, which will further expand the scope of application of ANL.

The Role of Lid in Protein-Solvent Interaction of the Simulated Solvent Stable Thermostable Lipase from Bacillus Strain 42 in Water-Solvent Mixtures

ABSTRACTLip 42 lipase, isolated from Bacillus sp. strain 42 was previously shown to be stable in polar organic solvent such as dimethyl sulfoxide (DMSO). Stabilities in different solvent compositions were studied based on 40°C pre-incubation in solvent, and the purified lipase was shown to retain at least 100% residual activity in up to 45% v/v DMSO. In 60% v/v DMSO, 68% of residual activity was retained, however, this dramatically reduced to 6.5% at 65% v/v DMSO. Activity enhancements were recorded at lower solvent compositions (less than 45% v/v solvent), whereby, at 30% v/v DMSO, enhancement was as much as 35%. Based on these solvent stability profile, molecular dynamic simulations were then carried out in the presence ofwater, 60% v/v DMSO + 40% v/v water and 100% v/v DMSO, by using a structure predictedfrom a highly homologous (97%) lipase (PDB:1JI3). Results showed that the flexibility changes in the helix-loop-helix motif covering catalytic triad were found to be associated with a hydrophobic cluster region. The presence of 60% v/v DMSO resulted in the disorganization of the cluster, accompanied with nonnative H-bonds formations. The cluster was retained in 100% v/v DMSO which resembled to that of water simulation. Mutant form of Lip 42, V171S contained residue substitution in the cluster and within helix-loop-helix motif. At 50°C pre-incubation, the mutant lost as much of the high temperature enhancements observed in low DMSO compositions. This indicated the potential role of hydrophobic residues in helix-loop-helix motif and the cluster in interfacial activation.

The lid is a structural and functional determinant of lipase activity and selectivity

In several lipases access to the enzyme active site is regulated by the position of a mobile structure named the lid. The role of this region in modulating lipase function is reviewed in this paper analysing the results obtained with three different recombinant lipases modified in the lid sequence: Candida rugosa lipase isoform 1 (CRL1), Pseudomonas fragi lipase (PFL) and Bacillus subtilis lipase A (BSLA). A CRL chimera enzyme obtained by replacing its lid with that of another C. rugosa lipase isoform (CRL1LID3) was found to be affected in both activity and enantioselectivity in organic solvent. Variants of the PFL protein in which three polar lid residues were replaced with amino acids strictly conserved in homologous lipases displayed altered chain length preference profile and increased thermostability. On the other hand, insertion of lid structures from structurally homologous enzymes into BSLA, a lipase that naturally does not possess such a lid structure, caused a reduction in the enzyme activity and an altered substrate specificity. These results strongly support the concept that the lid plays an important role in modulating not only activity but also specifity, enantioselectivity and stability of lipase enzymes.

Mutations in the “lid” region affect chain length specificity and thermostability of a Pseudomonas fragi lipase

The cold-adapted Pseudomonas fragi lipase (PFL) displays highest activity on short-chain triglyceride substrates and is rapidly inactivated at moderate temperature. Sequence and structure comparison with homologous lipases endowed with different substrate specificity and stability, pointed to three polar residues in the lid region, that were replaced with the amino acids conserved at equivalent positions in the reference lipases. Substitutions at residues T137 and T138 modified the lipase chain-length preference profile, increasing the relative activity towards C8 substrates. Moreover, mutations conferred to PFL higher temperature stability. On the other hand, replacement of the serine at position 141 by glycine destabilized the protein.

Improved activity and thermostability of Candida antarctica lipase B by DNA family shuffling

DNA family shuffling was used to create chimeric lipase B proteins with improved activity toward the hydrolysis of diethyl 3-(3',4'-dichlorophenyl)glutarate (DDG). Three homologous lipases from Candida antarctica ATCC 32657, Hyphozyma sp. CBS 648.91 and Crytococcus tsukubaensis ATCC 24555 were cloned and shuffled to generate a diverse gene library. A high-throughput screening assay was developed and used successfully to identify chimeric lipase B proteins having a 20-fold higher activity toward DDG than lipase B from C.antarctica ATCC 32657 and a 13-fold higher activity than the most active parent derived from C.tsukubaensis ATCC 24555. In addition, the stability characteristics of several highly active chimeric proteins were also improved as a result of family shuffling. For example, the half-life at 45 degrees C and melting point (T(m)) of one chimera exceeded those of lipase B from C.antarctica ATCC 32657 by 11-fold and 6.4 degrees C, respectively, which closely approached the stability characteristics of the most thermostable parent derived from Hyphozyma sp. CBS 648.91.

Isolation and characterization of Bacillus sp. BP-6 LipA, a ubiquitous lipase among mesophilic Bacillus species.

The aim of this study was to perform the isolation, cloning and characterization of a lipase from Bacillus sp. BP-6 bearing the features of a biotechnologically important group of enzymes. Strain Bacillus sp. BP-6, showing activity on tributyrin plates, was used for isolation of lipase-coding gene lipA by means of inverse and direct PCR. The complete 633 nucleotide ORF isolated was cloned in Escherichia coli for further characterization. The amino acid sequence of the cloned protein was 98% identical to B. subtilis and B. megaterium lipases, the enzyme also showing similar molecular and biochemical features. The gene coding for Bacillus sp. BP-6 LipA was found in all mesophilic Bacillus species assayed, indicating its ubiquity in the genus. The cloned enzyme displayed the same properties as those of homologous lipases. The overall profile of Bacillus sp. BP-6 LipA was found to be that of a ubiquitous and highly conserved subfamily I.4 bacterial lipase. Previously described lipases within this family have shown to be well suited for biotechnological applications, suggesting that the cloned enzyme could be used accordingly.

Enzyme-catalysed siloxane bond formation

Biosilicification occurs on a globally vast scale under mild conditions. Although research has progressed in the area of silica biosynthesis, the molecular mechanisms of these interactions are effectively unknown. The natural production of silica in the Tethya aurantia marine sponge, Cylindrotheca fusiformis diatom, and Equisetum telmateia plant appear to be similar. However, the studies were complicated mechanistic queries due to the use of silicic acid analogues. Given these complications, a carefully chosen model study was carried out to test the ability of enzymes to catalyse the formation of molecules with a single siloxane bond during the in vitro hydrolysis and condensation of alkoxysilanes. Our data suggest that homologous lipase and protease enzymes catalyse the formation of siloxane bonds under mild conditions. Non-specific interactions with trypsin promoted the in vitro hydrolysis of alkoxysilanes, while the active site was determined to selectively catalyse the condensation of silanols.

Structural Modeling and Characterization of a Thermostable Lipase from Bacillus stearothermophilus P1

The moderate thermophilic bacterium Bacillus stearothermophilus P1 expresses a thermostable lipase that was active and stable at the high temperature. Based on secondary structure predictions and secondary structure-driven multiple sequence alignment with the homologous lipases of known three-dimensional (3-D) structure, we constructed the 3-D structure model of this enzyme and the model reveals the topological organization of the fold, corroborating our predictions. We hypothesized for this enzyme the α/β-hydrolase fold typical of several lipases and identified Ser-113, Asp-317, and His-358 as the putative members of the catalytic triad that are located close to each other at hydrogen bond distances. In addition, the strongly inhibited enzyme by 10 mM PMSF and 1-hexadecanesulfonyl chloride was indicated that it contains a serine residue which plays a key role in the catalytic mechanism. It was also confirmed by site-directed mutagenesis that mutated Ser-113, Asp-317, and His-358 to Ala and the activity of the mutant enzyme was drastically reduced.