Homoleptic Copper Research Articles

CuI/CuII Chiral Homoleptic Complexes: Study of Self‐Recognition and Self‐Discrimination

AbstractThe formation of ML2 homoleptic copper(I) and copper(II) complexes from bidentate chiral ligands with C2 symmetry, comprising three types of substituents (namely benzyl, indanyl and phenyl groups), was investigated. The formation of homochiral or heterochiral complexes can be influenced by the nature of the substituents and the geometry induced by the oxidation state of the metal. All the complexes were isolated and characterized, in particular in the solid state by X‐ray diffraction studies. In solution, cyclic voltammetry was used to study ligand association and discrimination induced by the CuI/CuII transition.

Cooperative, Close and Remote Steric Effects on the Structural and Optical Properties of Copper(I) Bis‐Phenanthroline Complexes

AbstractThe synthesis as well as the structural, optical and computational characterization of seven new highly hindered homoleptic copper(I) phenanthroline complexes (namely C1–C7) is reported along with the comparison with the benchmark derivatives. Despite limited steric hindrance in direct proximity of the copper(I) coordination site, X‐ray structures show that the higher hindered derivatives of the series display a more optimal tetrahedral geometry with minimal D2 symmetry distortion. A novel remote control of the geometry, with steric hindrance away from the coordination site, leads to a favorable arrangement as demonstrated by structural and computational data. In addition, electrochemical and steady‐state and time‐resolved photophysical studies are presented which further support the beneficial effects on the ground‐state redox and excited‐state properties when both remote and close steric effects are exploited. Indeed, both an increase of the photoluminescence quantum yield and a prolongation of the excited state lifetime is observed for the highly‐substituted derivative C6 compared to benchmark counterparts on account of the reduced excited‐state flattening distortions imparted by the additional steric constraints.

Copper(I) photosensitizer-silica nanoparticle assembly towards enhanced aqueous photoluminescence

Harnessing the luminescence potential of Cu(I) complexes in aqueous media is typically hindered by their poor photostability and altered properties. Here, we report the synthesis, engineering and morphological characterization of a hydrophobic homoleptic copper(I) complex entrapped into silica nanoparticles, Cu-I@SiO2 (where “Cu-I” designates [Cu(2,9-diiodo-1,10-phenanthroline)2]+), as a promising stabilisation strategy towards water-compatible, Cu(I) complex-based luminescence. The polyether chain-decorated nano-objects are spherical with an average diameter of ca. 10.8 ± 1.9 nm. Upon dispersion in water, clear solution-like suspensions were obtained. Significantly, the aqueous suspensions photo-luminesce (Φem = 5×10-4) upon excitation through the Metal-to-Ligand Charge-Transfer transition (MLCT) of the embedded copper(I) complexes. In contrast, the corresponding silica-free molecular complex dissolved in an aqueous environment revealed fully quenched emission. Finally, the use of Cu-I@SiO2 suspensions as luminescent probes is reported, first by assessing their potential use as electrochemiluminescent probes, and second by monitoring the photoluminescence from Cu-I@SiO2 in the presence of whole blood.

Air- and Water-Stable Heteroleptic Copper (I) Complexes Bearing Bis(indazol-1-yl)methane Ligands: Synthesis, Characterisation, and Computational Studies.

A series of four novel heteroleptic Cu(I) complexes, bearing bis(1H-indazol-1-yl)methane analogues as N,N ligands and DPEPhos as the P,P ligand, were synthesised in high yields under mild conditions and characterised by spectroscopic and spectrometric techniques. In addition, the position of the carboxymethyl substituent in the complexes and its effect on the electrochemical and photophysical behaviour was evaluated. As expected, the homoleptic copper (I) complexes with the N,N ligands showed air instability. In contrast, the obtained heteroleptic complexes were air- and water-stable in solid and solution. All complexes displayed green-yellow luminescence in CH2Cl2 at room temperature due to ligand-centred (LC) phosphorescence in the case of the Cu(I) complex with an unsubstituted N,N ligand and metal-to-ligand charge transfer (MLCT) phosphorescence for the carboxymethyl-substituted complexes. Interestingly, proper substitution of the bis(1H-indazol-1-yl)methane ligand enabled the achievement of a remarkable luminescent yield (2.5%) in solution, showcasing the great potential of this novel class of copper(I) complexes for potential applications in luminescent devices and/or photocatalysis.

Photo-catalyzedα-arylation of enol acetate using recyclable silica-supported heteroleptic and homoleptic copper(I) photosensitizers.

Earth-abundant photosensitizers are highly sought after for light-mediated applications, such as photoredox catalysis, depollution and energy conversion schemes. Homoleptic and heteroleptic copper(I) complexes are promising candidates in this field, as copper is abundant and the corresponding complexes are easily obtained in smooth conditions. However, some heteroleptic copper(I) complexes suffer from low (photo)stability that leads to the gradual formation of the corresponding homoleptic complex. Such degradation pathways are detrimental, especially when recyclability is desired. In here, we report a novel approach for the heterogenization of homoleptic and heteroleptic Cu complexes on silica nanoparticles. In both cases, the photophysical properties upon surface immobilization were only slightly affected. Excited-state quenching with aryl diazonium derivatives occurred efficiently (108-1010M-1s-1) with heterogeneous and homogeneous photosensitizers. Moderate but almost identical yields were obtained for thea-arylation of enol acetate using the homoleptic complex in homogeneous or heterogeneous conditions. Importantly, the silica-supported photocatalysts were recycled with moderate loss in photoactivity over multiple experiments. Transient absorption spectroscopy confirmed that excited-state electron transfer occurred from the homogeneous and heterogeneous homoleptic copper(I) complexes to aryl diazonium derivatives, generating the corresponding copper(II) center that persisted for several hundreds of microseconds, compatible with photoredox catalysis applications.

The Homoleptic Curcumin-Copper Single Crystal (ML2): A Long Awaited Breakthrough in the Field of Curcumin Metal Complexes.

The first single crystal structure of the homoleptic copper (II) ML2 complex (M=Cu (II), L = curcumin) was obtained and its structure was elucidated by X-ray diffraction showing a square planar geometry, also confirmed by EPR. The supramolecular arrangement is supported by C-H···O interactions and the solvent (MeOH) plays an important role in stabilizing the crystal packing Crystallinity was additionally assessed by XRD patterns. The log P value of the complex (2.3 ± 0.15) was determined showing the improvement in water solubility. The cytotoxic activity of the complex against six cancer cell lines substantially surpasses that of curcumin itself, and it is particularly selective against leukemia (K562) and human glioblastoma (U251) cell lines, with similar antioxidant activity to BHT. This constitutes the first crystal structure of pristine curcumin complexed with a metal ion.

Influence of the distance between oxygen donor atoms and copper(I) ion on the efficiency of intramolecular exciplex quenching in homoleptic copper(I) complexes

Exciplex quenching is one of the most deleterious phenomena which efficiently leads to the extinction of the excited properties of copper(I) complexes. This process consists in the ligation of an extra ligand on the copper ion when the complex is in the excited state. This extra ligand can be a solvent molecule, and more rarely a donor atom located on the molecular structure of the complexes themselves. In this article, we report the synthesis of three homoleptic copper(I) complexes where the copper (I) ion is coordinated by 1,10-phenanthroline derivatives, bearing floppy side chains in positions 2 and 9 and containing oxygen atoms. The latter can act as extra ligands for the copper ion. We study the impact of these oxygen atoms on the physical and chemical properties of the associated copper (I) complexes. We highlight the fact that the distance between the oxygen atoms and the copper ion is determinant for the existence of exploitable excited state properties.

Syntheses, Crystal Structure and Conducting Property of New 4-N,N-dimethyl benzyl-N-benzyl dithiocarbamato Cu(II) Complex

A new homoleptic copper (II) dithiocarbamate complex having molecular formula [Cu(C17 H19N2S2)2], has been synthesized and characterized by elemental analysis and spectroscopy (IR and UV–Vis). Single crystal X-ray studies confirm that the complex crystallises in monoclinic with space group P121/c1 and holding dimeric structure by weak Cu...S and H...H intractions. The existence of attractive intermolecular C−H⋯H−C interaction is a notable feature in the crystal packing of this complex. The electrical conductivity measurement between temperatures range of 303–393 K reflects that complex exhibits weak semiconducting behavior.

Back to the future: asymmetrical DπA 2,2'-bipyridine ligands for homoleptic copper(i)-based dyes in dye-sensitised solar cells.

Metal complexes used as sensitisers in dye-sensitised solar cells (DSCs) are conventionally constructed using a push-pull strategy with electron-releasing and electron-withdrawing (anchoring) ligands. In a new paradigm we have designed new DπA ligands incorporating diarylaminophenyl donor substituents and phosphonic acid anchoring groups. These new ligands function as organic dyes. For two separate classes of DπA ligands with 2,2'-bipyridine metal-binding domains, the DSCs containing the copper(i) complexes [Cu(DπA)2]+ perform better than the push-pull analogues [Cu(DD)(AA)]+. Furthermore, we have shown for the first time that the complexes [Cu(DπA)2]+ perform better than the organic DπA dye in DSCs. The synthetic studies and the device performances are rationalised with the aid of density functional theory (DFT) and time-dependent DFT (TD-DFT) studies.

Synthesis and Physico-Chemical Properties of Homoleptic Copper(I) Complexes with Asymmetric Ligands as a DSSC Dye.

To develop low-cost and efficient dye-sensitized solar cells (DSSCs), we designed and prepared three homoleptic Cu(I) complexes with asymmetric ligands, M1, M2, and Y3, which have the advantages of heteroleptic-type complexes and compensate for their synthetic challenges. The three copper(I) complexes were characterized by elemental analysis, UV-vis absorption spectroscopy, and electrochemical measurements. Their absorption spectra and orbital energies were evaluated and are discussed in the context of TD-DFT calculations. The complexes have high VOC values (0.48, 0.60, and 0.66 V for M1, M2, and Y3, respectively) which are similar to previously reported copper(I) dyes with symmetric ligands, although their energy conversion efficiencies are relatively low (0.17, 0.64, and 2.66%, respectively).

Comparative Study of Antioxidant and Pro-Oxidant Properties of Homoleptic and Heteroleptic Copper Complexes with Amino Acids, Dipeptides and 1,10-Phenanthroline: The Quest for Antitumor Compounds.

In a search for new antitumoral agents, a series of homoleptic copper(II) complexes with amino acids and dipeptides, as well as heteroleptic complexes containing both dipeptides and 1,10-phenanthroline, were studied. Furthermore, a single-crystal structure containing alanyl-leucinato ([Cu3(AlaLeu)3(H2O)3(CO3)]·PF6·H2O), which is the first homotrinuclear carbonato-bridged copper(II) complex with a dipeptide moiety, is presented. To assess possible antitumor action mechanisms, we focused on the comparative analysis of pro- and antioxidant behaviors. Pro-oxidant activity, in which the reactive oxygen species (ROS) formed by the reaction of the complexes with H2O2 produce oxidative damage to 2-deoxy-d-ribose, was evaluated using the TBARS method. Additionally, the antioxidant action was quantified through the superoxide dismutase (SOD)-like activity, using a protocol based on the inhibitory effect of SOD on the reduction of nitrobluetetrazolium (NBT) by the superoxide anion generated by the xanthine/xanthine oxidase system. Our findings show that Cu–amino acid complexes are strong ROS producers and moderate SOD mimics. Conversely, Cu–dipeptide–phen complexes are good SOD mimics but poor ROS producers. The activity of Cu–dipeptide complexes was strongly dependent on the dipeptide. A DFT computational analysis revealed that complexes with high SOD-like activity tend to display a large dipole moment and condensed-to-copper charge, softness and LUMO contribution. Moreover, good ROS producers have higher global hardness and copper electrophilicity, lower copper softness and flexible and freely accessible coordination polyhedra.

A Copper(I) Complex with Two Unpaired Electrons, Synthesised by Oxidation of a Copper(II) Complex with Two Redox-Active Ligands.

Two homoleptic copper(II) complexes [Cu(L1)2] and [Cu(L2)2] with anionic redox‐active ligands were synthesised, one with urea azine (L1) and the other with thio‐urea azine (L2) ligands. One‐electron oxidation of the complexes initiates an unprecedented redox‐induced electron transfer process, leading to monocationic copper(I) complexes [Cu(L1)2]+ and [Cu(L2)2]+ with two oxidised ligands. While [Cu(L1)2]+ is best described as a CuI complex with two neutral radical ligands that couple antiferromagnetically, [Cu(L2)2]+ is a CuI complex with two clearly different ligand units in the solid state and with a magnetic susceptibility close to a diamagnetic compound. Further one‐electron oxidation of the complex with L1 ligands results in a dication [Cu(L1)2]2+, best described as a CuI complex with a twofold oxidised, monocationic ligand and a neutral radical ligand. The stability in at least three redox states, the accumulation of spin density at the ligands and the facile ligand‐metal electron transfer make these complexes highly attractive for a variety of applications; here the catalytic aerobic oxidation of alcohols to aldehydes is tested.

Synthesis and structure of homoleptic copper complexes based on fluorinated functionalized 1,3-diketones

Synthesis and structure of homoleptic copper complexes based on fluorinated functionalized 1,3-diketones

Dehalogenation reaction photocatalyzed by homoleptic copper(i) complexes associated with strongly reductive sacrificial donors

To perform challenging reduction reactions with light at low cost and low toxicity, we use for the first time a reductive quenching cycle with a simple, strongly colored homoleptic copper(i) complex [Cu(dipp)2]+(dipp = 2,9-diisopropyl-1,10-phen).

Methoxy-substituted copper complexes as possible redox mediators in dye-sensitized solar cells

Methoxy-substituted aromatic diimines and corresponding homoleptic copper(i) and copper(ii) complexes as possible redox mediators in dye-sensitized solar cells.

Rare proximity enforced copper hydrogen interactions in copper(i)-chalcogenones

Homoleptic tetra-coordinated copper(i)-chalcogenone complexes have been reported with rare proximity-enforced intramolecular Cu⋯H–C(sp3) hydrogen bonding interactions.

Cover Feature: A New Phenanthroline Ligand and the Spontaneous Resolution of its Homoleptic Copper(I) Complex (Eur. J. Org. Chem. 47/2020)

The Cover Feature shows a new substitution pattern obtained when reacting phenanthrolines with organolithium compounds. Contrary to the now classical 2,9-disubstitution described in the seminal paper of Christiane Dietrich-Buchecker et al., to whom this article is dedicated, a 2,7-disubstitution pattern was found by chance under given conditions. A rare spontaneous resolution of its bis(phenanthroline)copper(I) complex in the solid state is also described in the article. (cover picture created by Nina Hernandez). More information can be found in the Full Paper by R. Ruppert et al.

A New Phenanthroline Ligand and the Spontaneous Resolution of its Homoleptic Copper(I) Complex

During the synthesis of 1,10‐phenanthroline derivatives sterically hindered in the 2 and/or 9 positions, serendipity led to the discovery of a new substitution pattern on phenanthroline with good and reproducible yields. When toluene was used as a solvent and the aryl‐lithio reagents generated with tBuLi, after a first substitution at the 2 position, a benzyl substituent was regioselectively introduced at the 7 position. It is proposed that the benzyllithium reagent is formed by reaction with the solvent and that the steric hindrance on the intermediates controls the nucleophilic addition. Among the complexes prepared (Pd(II), Cu(I)) with these new ligands, a chiral copper(I) complex exhibits spontaneous resolution in the solid state.

Non-Symmetrical Sterically Challenged Phenanthroline Ligands and Their Homoleptic Copper(I) Complexes with Improved Excited-State Properties.

A strategy is presented to improve the excited state reactivity of homoleptic copper-bis(diimine) complexes CuL2 + by increasing the steric bulk around CuI whereas preserving their stability. Substituting the phenanthroline at the 2-position by a phenyl group allows the implementation of stabilizing intramolecular π stacking within the copper complex, whereas tethering a branched alkyl chain at the 9-position provides enough steric bulk to rise the excited state energy E00 . Two novel complexes are studied and compared to symmetrical models. The impact of breaking the symmetry of phenanthroline ligands on the photophysical properties of the complexes is analyzed and rationalized thanks to a combined theoretical and experimental study. The importance of fine-tuning the steric bulk of the N-N chelate in order to stabilize the coordination sphere is demonstrated. Importantly, the excited state reactivity of the newly developed complexes is improved as demonstrated in the frame of a reductive quenching step, evidencing the relevance of our strategy.

Are Alkynyl Spacers in Ancillary Ligands in Heteroleptic Bis(diimine)copper(I) Dyes Beneficial for Dye Performance in Dye-Sensitized Solar Cells?

The syntheses of 4,4′-bis(4-dimethylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (1), 4,4′-bis(4-dimethylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (2), 4,4′-bis(4-diphenylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (3), and 4,4′-bis(4-diphenylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (4) are reported along with the preparations and characterisations of their homoleptic copper(I) complexes [CuL2][PF6] (L = 1–4). The solution absorption spectra of the complexes exhibit ligand-centred absorptions in addition to absorptions in the visible region assigned to a combination of intra-ligand and metal-to-ligand charge-transfer. Heteroleptic [Cu(5)(Lancillary)]+ dyes in which 5 is the anchoring ligand ((6,6′-dimethyl-[2,2′-bipyridine]-4,4′-diyl)bis(4,1-phenylene))bis(phosphonic acid) and Lancillary = 1–4 have been assembled on fluorine-doped tin oxide (FTO)-TiO2 electrodes in dye-sensitized solar cells (DSCs). Performance parameters and external quantum efficiency (EQE) spectra of the DSCs (four fully-masked cells for each dye) reveal that the best performing dyes are [Cu(5)(1)]+ and [Cu(5)(3)]+. The alkynyl spacers are not beneficial, leading to a decrease in the short-circuit current density (JSC), confirmed by lower values of EQEmax. Addition of a co-absorbent (n-decylphosphonic acid) to [Cu(5)(1)]+ lead to no significant enhancement of performance for DSCs sensitized with [Cu(5)(1)]+. Electrochemical impedance spectroscopy (EIS) has been used to investigate the interfaces in DSCs; the analysis shows that more favourable electron injection into TiO2 is observed for sensitizers without the alkynyl spacer and confirms higher JSC values for [Cu(5)(1)]+.