Photonic Crystal Fiber Research Articles

Ultra-sensitive DNA detection with single-base mismatch resolution using a tapered thin-diameter photonic crystal fiber interferometer

A tapered thin-diameter photonic crystal fiber interferometer (TTD-PCFI) biosensor is proposed and demonstrated for DNA hybridization detection with an ultra-low limit of detection (LoD) and high specificity. The TTD-PCFI is fabricated by arc-discharged melting and adiabatic tapering, with a lower loss and stronger evanescent optical field. The fabricated TTD-PCFI with a diameter of 8.63 µm achieves a high refractive index sensitivity of 3842.5 nm/RIU. DNA hybridization detection of concentration ranging from 1 fM to 1 pM is achieved, with a sensitivity of 632 pm/lg(fM). The measured LoD is as low as 410 aM. Single-base mismatch detection of 25-base target single-stranded DNA is also achieved. The proposed label-free DNA biosensor has the advantages of the ultra-low LoD, high specificity, and real-time detection, which has great application prospects in the fields of disease diagnosis, microbial detection, and environmental science.

A fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber for ultrasonic testing

A fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber for ultrasonic testing

Ultra-high sensitivity photonic crystal fiber sensors based on dispersion turning point sensitization of surface plasmonic polariton modes for low RI liquid detection

Ultra-high sensitivity photonic crystal fiber sensors based on dispersion turning point sensitization of surface plasmonic polariton modes for low RI liquid detection

Dual-core Photonic Crystal Fiber Temperature and Humidity Sensor Based on PDMS and PVA

Dual-core Photonic Crystal Fiber Temperature and Humidity Sensor Based on PDMS and PVA

Innovative Refractive Index Sensor Utilizing Terahertz Spectrum for Early Cancer Detection: a Photonic Crystal Fiber Approach.

In this article, we have presented a new cancer sensor with a square core Photonic Crystal Fiber (PCF) to detect the cancerous tissues of the cervix, breast, and skin. This process is thus streamlined and separated by PCF due to its excellent detection characteristics. All required configurations using the finite element method are developed, and various performances of the model are studied using MATLAB. The results depict a mathematical analysis regarding the effectiveness of the sensor within the frequency range of 1.0-2.8 THz. Its relative sensitivity becomes around 99.85% at 2.2 THz with 8.49 × 10-14 dB/m for CL. This PCF has a spot size 3.06 × 10-4 μm that further contributes an effective area of 9.078 × 10-8 m2. Moreover, it has a very small EML of 0.00182 cm-1. This device uses the unique photonic properties of cancer cells to provide quick, reliable, and really very accurate methods for cancer cell identification, such as in breast, cervical, and skin cancers. Due to small size and flexibility, only minimally invasive operations are possible. Real-time monitoring can also be provided, hence improving immediate evaluation and therapy efficacy. This article introduces a novel integration of PCF technology with THz radiation to create a highly sensitive sensor for early cancer detection. By utilizing THz waves' non-invasive and high-resolution properties, this sensor overcomes the sensitivity limitations of traditional methods. It also addresses scattering issues from conventional air hole shapes through optimized geometric configurations, setting a new standard in biomedical sensing and potentially revolutionizing early cancer diagnostics.

Correction: Highly refractive index sensor based on tapered core fiber bragg grating

Correction: Highly refractive index sensor based on tapered core fiber bragg grating

Advanced fiber optic sensors for quantitative nitrite detection: Comparative analysis of plasmonic tilted fiber Bragg gratings and fiber optic tips with ion-imprinted polymers

The presence of nitrite, a prevalent contaminant in natural environments, presents a significant environmental and human health concern. Hence, it is imperative to develop a sensor with the ability to quantitatively detect nitrite. This study focuses on the design and development of i) probe 1: tilted fiber Bragg gratings (TFBGs) and ii) probe 2: fiber optic tip-based plasmonic sensors utilizing ion-imprinted polymers. The concentration of nitrite was assessed at various levels using both sensing configurations. The outcomes indicated that the TFBGs-based sensor exhibited a sensitivity and limit of detection (LOD) of 0.469 nm/ln(μg/mL) and 0.142 μg/mL in the linear detection range of 0.5–50 μg/mL. The fiber optic tip-based sensor exhibited a sensitivity and LOD of 1.16 nm/ln(μg/mL) and 0.176 μg/mL within the 1–50 μg/mL linear detection range. The obtained sensing results reveal that the sensors presented in this study are able to accurately detect nitrite at various concentrations in a quantitative manner. Moreover, an assessment was conducted to examine the selectivity and reusability of the sensor individually, yielding satisfactory results.

Simulation analysis of a photonic crystal fiber refractive index sensor based on a double-layer film structure and surface plasmon resonance technology

A photonic crystal fiber surface plasmon resonance sensor based on a double-layer membrane structure is designed and analyzed. In the simple sensing structure with only one air hole size, TiO2 and Au layers with specific thicknesses are sequentially coated on the optical fiber to form a double-layer structure. The sensing characteristics of the double-layer membrane structure are studied by the finite element method. Compared to the single-layer membrane structure, the double-layer membrane sensor has significant sensing properties such as a better wavelength sensitivity and a smaller full width at half maximum in the loss spectrum. In the refractive index range between 1.37 and 1.43, the maximum wavelength sensitivity and average wavelength sensitivity of the sensor are 19,900 nm/RIU and 7417 nm/RIU, respectively, and the resolution can be up to 5.03×10−6RIU. The proposed photonic crystal fiber optic sensor achieves high performance with a simpler sensing structure than previous photonic crystal fiber optic sensors, and eliminates the step of polishing, which will greatly reduce the difficulty of actual fabrication and the error due to uneven polishing. The results show that the photonic crystal fiber optic sensor with a double-layer membrane structure has excellent performance. Due to its high sensitivity and resolution, it has great potential for applications in environmental monitoring, biosensing and chemical sensing.

Mid-infrared supercontinuum generation in As2S3-circular photonic crystal fibers pumped by 4.5 µm and 6 µm femtosecond lasers

A study on As2S3 chalcogenide photonic crystal fiber (PCF) and its potential in supercontinuum generation (SCG) applications is presented. The designed fibers exhibit near-zero flattened chromatic dispersion, facilitating coherent and broad SCG utilizing femtosecond lasers at 4.5 and 6 µm wavelengths. A continuous spectrum spanning from 1.5 to 8 µm is achieved when the initial fiber is stimulated with an input power of 20 kW. With a pulse width of 100 fs and input power of 6 kW, the second fiber provides soliton-induced SCG with 2 to 15 µm spectral bandwidth. Furthermore, the integration of these large core diameter PCFs with high-power laser pulses guarantees the preservation of optical fiber integrity without damage. Consequently, these fibers hold promise for delivering SC spectra characterized by high power density, catering to a diverse range of practical applications including optical communications, spectroscopy, sensing, metrology, and calibration.

High-Sensitivity Refractive Index Sensor with Dual-Channel Based on Surface Plasmon Resonance Photonic Crystal Fiber.

In order to achieve a high-precision synchronous detection of two different refractive index (RI) analytes, a D-type surface plasmon resonance (SPR) photonic crystal fiber (PCF) RI sensor based on two channels is designed in this paper. The sensor uses a D-shaped planar region of the PCF and a large circular air hole below the core as the sensing channels. Surface plasmon resonance is induced by applying a coating of gold film on the surface. The full-vector finite-element method (FEM) is used to optimize the structural parameters of the optical fiber, and the sensing characteristics are studied, including wavelength sensitivity, RI resolution, full width at half maximum (FWHM), figure of merit (FOM), and signal-to-noise ratio (SNR). The results show that the channel 1 (Ch 1) can achieve RI detection of 1.36-1.39 in the wavelength range of 1500-2600 nm, and the channel 2 (Ch 2) can achieve RI detection of 1.46-1.57 in the wavelength range of 2100-3000 nm. The two sensing channels can detect independently or simultaneously measure two analytes with different RIs. The maximum wavelength sensitivity of the sensor can reach 30,000 nm/RIU in Channel 1 and 9900 nm/RIU in Channel 2. The RI resolutions of the two channels are 3.54 × 10-6 RIU and 10.88 × 10-6 RIU, respectively. Therefore, the sensor realizes dual-channel high- and low-RI synchronous detection in the ultra-long wavelength band from near-infrared to mid-infrared and achieves an ultra-wide RI detection range and ultra-high wavelength sensitivity. The sensor has a wide application prospect in the fields of chemical detection, biomedical sensing, and water environment monitoring.

Design and simulation of a compact polarization beam splitter based on dual-core photonic crystal fiber with elliptical gold layer

For the polarization multiplexing requirements in all-optical networks, this work presents a compact all-fiber polarization beam splitter (PBS) based on dual-core photonic crystal fiber (PCF) and an elliptical gold layer. Numerical analysis using the finite element method (FEM) demonstrates that the mode modulation effect of the central gold layer effectively reduces the dimensions of the proposed PBS. By determining reasonable structural parameters of the proposed PCF, the coupling length ratio (CLR) between X- and Y-polarized super-modes can approach 2, achieving a minimal device length of 0.122 mm. The PBS exhibits a maximum extinction ratio (ER) of − 65 dB at 1.55 μm, with an operating bandwidth spanning 100 nm (1.5–1.6 μm) and a stable insertion loss (IL) of ~ 1.5 dB at 1.55 μm. Furthermore, the manufacture feasibility and performance verification scheme are also investigated. It is widely anticipated that the designed PBS will play a crucial role in the ongoing development process of miniaturization and integration of photonic devices.

Splice Loss Investigation of Single-Mode Fiber and Photonic Crystal Fibers and Its Potential Refractometric Sensing Applications

Splice Loss Investigation of Single-Mode Fiber and Photonic Crystal Fibers and Its Potential Refractometric Sensing Applications

Design of hexagonal shaped spectroscopy based biosensor for the detection of tuberculosis

A proposal has been made to identify tuberculosis cells using a novel compact sensor based on photonic crystal fiber: PCF in accordance with hexagonal spectroscopy. This proposed structure, which consists of a closely packed hexagonal air hole in the cladding region and a hollow-core area, possesses a very low loss of 6.30 × 10−8 dB/m and an exceptionally high sensitivity of up to 91.75 % (tuberculosis cell for 1.345). Numerous optical parameters have been identified and assessed, comprised of the numerical aperture, the V-parameter, or normalized frequency (Veff), and the effective area (Aeff). The operational wavelength range is defined as 0.80–3.0 THz. The numerical investigation of the properties of the proposed TB sensors is performed within the environment of COMSOL Multiphysics (Version 5.3) using FV-FEM stands for the full vector finite element method. PCF sensors composed of hexagonal lattice in a circular form with ZEONEX as the backdrop material is intended to boost the sensitivity response in comparison to the earlier works. Additionally, the sensor that is being displayed achieves a single modality throughout its whole operational wavelength range. This proposed sensor may play a significant role in identifying tuberculosis thanks to its superior sensitivity response and extremely minimal confinement loss. So, it is clearly seen that this sensor could be used to bio-medical sectors with process of terahertz (THz) wave pulse.

SPR based dual parameter wide range curling pot shaped photonic crystal fiber sensor

This article proposes a curling pot shaped photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR), which utilizes two parallel polished surfaces in the cladding to achieve dual parameter measurements of liquid refractive index (RI) and temperature. The mode characteristics and sensing performance of the designed PCF sensor are studied using the finite element method, and the effects of changes in structural parameters such as pore radius, spacing, and gold film thickness on the resonance spectrum are analyzed. The sensing accuracy of the sensor is insensitive to the change of structural parameters, and it has the characteristics of a wide detection range, high sensitivity, and easy manufacture. When the measured RI is in the range of 1.33∼1.42, the maximum RI sensitivity is 20400 nm RIU−1, and the maximum FOM is 483.3 RIU−1. When the temperature ranges from −10 °C to 100 °C, the maximum sensitivity is 15.4 nm °C−1, and the maximum FOM is 0.43 RIU−1. The tight structure design of the sensor core close to the polishing surface and the anti-spill light design with a uniform arrangement of air holes enhance the SPR effect, which is the essential reason for achieving a wide detection range and high sensitivity.

Ultra-wide measurement range D-shaped photonic crystal fiber sensor based on surface plasmon resonance

Ultra-wide measurement range D-shaped photonic crystal fiber sensor based on surface plasmon resonance

Highly sensitive photonic crystal fiber chemical sensor for detecting carbon disulfide and bromoform in the THz regime

In this study, an innovative photonic crystal fiber (PCF) designed specifically for the detection of carbon disulfide and bromoform liquid chemicals within the THz frequency range was introduced. The PCF’s structural design was achieved using the Finite Element Method (FEM) and Perfectly Matched Layer (PML) boundary conditions within COMSOL Multiphysics, ensuring precision through appropriate numerical parameters. Six distinct configurations were developed, incorporating circular, square, rectangular slotted, benzene-shaped circular, and two elliptical core designs, as well as an eight-elliptical core design. The PCF models were constructed utilizing the dielectric material TOPAS for accurate simulation and analysis. Various crucial parameters of the proposed PCF were examined across a wide THz spectrum spanning from 0.2 to 1.2 THz. The PCF model exhibited a peak output at the operating frequency of 0.8 THz for the square-shaped core design, achieving a relative sensitivity of 96.891% for bromoform and 95.603% for carbon disulfide. Remarkably low material losses of 0.0081104 cm−1 for bromoform and 0.006703 cm−1 for carbon disulfide were observed, along with a core power fraction of 93.107% for bromoform and 94.263% for carbon disulfide. The effective area was determined to be 1.77 × 10−07 μm2 for bromoform and 1.70 × 10−07 μm2 for carbon disulfide, while the confinement loss measured 2.25 × 10−17 dB/cm for bromoform and 4.76 × 10−17 dB/cm for carbon disulfide. These superior attributes strongly suggest that this model will be crucial in applications like supercontinuum generation, sensing, and biomedical imaging.

Temporal reflection from short pump pulses inside a dispersive nonlinear medium: the impact of pump parameters

We have studied, through a series of experiments and numerical simulations, how temporal reflection from an intense pump pulse inside a photonic crystal fiber is affected by parameters of the pump pulse used to form a moving high-index boundary. We used femtosecond pump pulses, which slow down inside the fiber as their spectrum red-shifts because of intrapulse Raman scattering. Temporal reflection of probe pulses occurs from such decelerating pump pulses. We changed the width and chirp of our pump pulses with a 4f pulse shaper capable of providing both spectral filtering and frequency chirping. We found that temporal refection exhibited novel features, to our knowledge, when pump pulses were made wider or chirped. In both cases, two or more reflected pulses were produced at different wavelengths in a specific range of the initial pump-probe delays. Numerical simulations reveal that the origin of such novel features is related to the complex nonlinear evolution of pump pulses inside optical fibers.

High-energy nanosecond pulse extraction from a Tm-doped photonic crystal fiber laser emitting at 2050 nm with narrow linewidth

High-energy nanosecond pulse extraction from a Tm-doped photonic crystal fiber laser emitting at 2050 nm with narrow linewidth

A double clad ASE Re-injected hybrid TDFA and HDFA amplifier with ±1.44 dB GF

Abstract Current developments in wireless communications accentuate the exigency of high gain, low noise figure (NF) and minimum gain fluctuations (GF) based optical amplifier in 1.9–2.15 μm eye safe wavelength band. Hybrid thulium (Tm) doped fiber amplifier (TDFA) and holmium (Ho) doped fiber amplifier (HDFA) are the perfect candidates to extend the bandwidth towards 2 μm long wavelengths. In this work, amplifier spontaneous emission (ASE) re-injected double clad TDFA-HDFA hybrid amplifier using Fiber bragg gratings (FBGs) is presented for the amplification of 64 wavelength division multiplexed (WDM) channels covering 63 nm wavelength window. Further, performance of proposed amplifier with and without ASE reinjection is evaluated in terms of Gain, NF, GF and optical signal to noise ratio (OSNR). Effects of single and double clad on the Gain are studied and optimization of Tm and Ho doped fiber length, pump powers, and input power has also been accomplished. The GF as low as ±1.44 dB, Gain >28 dB, NF < 5.08 dB, output power 4.2 W are achieved in ASE re-injected configuration using 785 nm pump at 55 dBm in TDFA and 1,900 nm pump at 20 dBm in HDFA. It is noticed that double clad and ASE reinjection in TDFA and HDFA offer better GF.

Highly efficient hybrid-structured photonic crystal fiber with ultra-low loss and near-zero flat dispersion for terahertz waveguiding

Highly efficient hybrid-structured photonic crystal fiber with ultra-low loss and near-zero flat dispersion for terahertz waveguiding