Hollow Cylindrical Structures Research Articles

Tunable surface plasmon properties of hollow cylindrical nanocomposite structures

Tunable surface plasmon properties of hollow cylindrical nanocomposite structures

An explainable variational autoencoder model for three-dimensional acoustic emission source localization in hollow cylindrical structures

An explainable variational autoencoder model for three-dimensional acoustic emission source localization in hollow cylindrical structures

Effects of inserting ultrashort carbon nanotubes into lipid bilayers on membrane morphology

AbstractSingle‐walled carbon nanotubes (CNTs) are carbon materials with unique thermal, optical, mechanical, and electrical properties, with hollow cylindrical structures of a few nanometers in diameter. CNTs cut to about 10 nm (Ultrashort CNTs, US‐CNTs) can spontaneously insert into lipid bilayers. Therefore, applications have been proposed to combine CNTs with lipid bilayers to give the membranes the properties of CNTs. However, CNTs interact with membranes to induce morphological changes in the membranes, which may hinder these applications. In this study, to investigate the effects, US‐CNTs are exposed to lipid bilayer vesicles (giant unilamellar vesicles, GUVs), which are used as a model for cell membranes, and the changes in membrane morphology with each US‐CNT concentration were evaluated by fluorescence microscopy. As a result, GUVs show morphological changes upon exposure to US‐CNTs, eventually transforming into a multiple vesicle‐linked shape. This result suggests an increase in the area and asymmetry of the GUV membrane. Based on these results, we have proposed a hypothesis regarding the mechanism of morphological changes induced in the GUV membranes by US‐CNTs exposure.

Twist design of lattice structure fabricated by powder bed fusion to adjust the energy absorption behavior

Additive manufactured lattice structures offer great potential for impact resistance applications. They exhibit excellent energy absorption characteristics during the elasto-plastic deformation process, providing protection to internal devices. However, the mechanical response of lattice structures undergoes substantial variations during the deformation process, thereby imposing limitations on their energy absorption behavior. This study introduces a novel twist design to modify the energy absorption behavior of rectangular and hollow cylindrical lattice structures. Powder bed fusion was used to fabricate the twisted lattice structures. The study employed a combination of compressive simulations and experimental investigations to systematically explore the impact of the twist angle on the peak crushing force, energy absorption, and crash load efficiency of the structures. Adjusting the twist angle results in a reduction of the peak crushing force and a transition towards a stable loading profile during the deformation process. Moreover, the crash load efficiency is also reduced. The twist design concept presented in this paper provides insight into designing and optimizing lattice structures for energy absorption applications.

Quasistatic component generation of group velocity mismatched guided waves in tubular structures for microdamage localization

Quasistatic component (QSC) of guided wave (GW) has relatively low attenuation due to low frequency and high sensitivity to microdamage. The group velocity matching between primary GW and its QSC or higher harmonics usually facilitates the measurement of nonlinear signals due to cumulative effect of amplitude, but it restricts the determination of microdamage location. While group velocity mismatch is general for most of the wave mode pairs in nonlinear GW testing, this study presents a novel method for identifying the location of early stage microdamage using QSC generation of ultrasonic GW propagation in tubular structures under group velocity mismatching condition. A three-dimensional finite element (FE) model is developed to provide insights into the generation and propagation characteristics of the QSC induced by both global material weak nonlinearity and simulated local microdamage in metallic pipes. The FE analysis verifies the L(0,1) mode of the QSC generated from propagations of different fundamental wave modes. The generation efficiency and cumulation feature of the QSC pulse are obtained and discussed. By exploiting the group velocity mismatching condition, a microdamage localization method is proposed based on the L(0,1)-QSC mode pair, which requires one-way excitation of only one primary wave. Experiments are conducted using early corrosion aluminum specimens to investigate the QSC pulse signals and verify the proposed method. The FE and experimental results demonstrate the fundamental properties of QSC generation by GWs in isotropic metallic hollow cylindrical structures. The feasibility of the proposed microdamage localization method is validated experimentally for promising industrial applications.

Preparation, Structure, and Properties of Chitosan Microtubes

Procedures were developed for forming hollow cylindrical structures with the wall thickness in the micrometer range (microtubes) from chitosan solutions in citric, lactic, and glycolic acids. The procedures are based on the phase-transfer neutralization induced by the transport of ions (hereinafter, ion-induced reaction), occurring at the liquid–liquid or solid–liquid interface, namely, on the polymer-analogous conversion of the salt form of the polymer to the base form in a NaOH or triethanolamine medium or formation of a water-insoluble polyelectrolyte complex with sodium dodecylbenzenesulfonate. Comparative analysis of the dependences of the morphological, structural, elastoplastic, physicomechanical, and biological properties of the structures on the reaction conditions and kind of the organic acid and neutralizing agent was made. The microtubes prepared from a chitosan solution in glycolic acid by ion-induced neutralization at the solid–liquid interface in a NaOH or triethanolamine medium exhibit the optimum levels of strength and elasticity, comparable with those of a fragment of human carotid artery and xenopericardial patch. The hemo- and biocompatibility and controlled biodegradation of these materials make them promising as analogs of biodegradable blood vessel implants.

Axial stress measurement method for hollow cylindrical steel structures based on non-dispersive characteristics of T (0,1) guided waves

This article presents an equivalent sound propagation model for hollow cylindrical structures subjected to axial stress, which yields theoretical solutions for sound velocity changes in steel pipes under varying stress levels. To enable the excitation and detection of T (0,1) mode guided waves in hollow steel pipes, an electromagnetic ultrasonic transducer (EMAT) array based on the principle of magnetostriction is designed and tested. To accurately extract nanosecond-level sound time changes due to stress, this study devises the LMS-Gabor algorithm, which exploits the non-dispersive properties of T (0,1) mode guided waves to process the echo signal. Experimental results demonstrate that this stress measurement approach can achieve high accuracy, even in the presence of noise and signals in the same frequency band.

A thermal resistance detection of heteromorphic devices using SiC diode’s temperature-sensitive parameters

Certain special-shaped devices, such as traveling wave tubes, can be called hollow cylindrical structures in aerospace engineering and other applications. However, the structural complexity of such devices means that their heat dissipation characteristics cannot be measured directly using conventional techniques. The present work describes a method to directly measure such devices’ thermal resistance by semiconductors’ temperature-sensitive parameters. We prepared a special probe to collect transient temperature response, and the differential structure-function curves were obtained by processing the data using the structure-function method. We demonstrate that this method can effectively characterize cylindrical devices’ thermal resistance and detect differences caused by different processes and structures.

Deconstructed beetles: Bilayered composite materials produce green coloration with remarkably high near-infrared reflectance

Beetle elytra (hardened forewings) are a promising source of inspiration to develop or enhance the performance of human-fabricated composite materials. The structures responsible for optical properties in the ultra-violet to visible spectrum (300–700 nm) have been extensively characterised, but we have limited knowledge of optical properties and their physical origin in the near-infrared (NIR; 700–1700 nm). We examined the elytra of three species of green scarab beetles (Xylonichus eucalypti, Anoplognathus prasinus and Paraschizognathus olivaceus) with very high NIR reflectance. We manually separated layers in the elytra to disambiguate their contributions to the overall optical response. We show that unlike other scarabs, nanostructures within the cuticle layer do not produce notable reflectance. Instead, the cuticle resembles a pigment-based filter with 50% transmittance in the NIR and absorption in the visible spectrum contributing to the green appearance. Each species has a layer below the cuticle that appears white to the naked eye and produces broadband reflectance, particularly in the near-infrared; however, the structure of the white underlay differs markedly between the three species. In A. prasinus and P. olivaceus, the structure is disordered (no regular, repeated elements at optical length scales); whereas in Xylonichus eucalypti, the white underlay was notably thinner and comprised quasi-ordered hollow cylindrical structures embedded in a chitin matrix. We modelled the coherent scattering produced by this structure to demonstrate that it is responsible for broadband visible and NIR reflectance. We discuss biological implications and technological applications of the composite structure of beetle elytra.

Experimental Study on the Axial Compression Performance of Glued Wood Hollow Cylinders Reinforced with BFRP

The present paper investigates the impact of basalt fiber reinforced polymer (BFRP) on the axial compression performance of glued wood hollow cylinders. This study aims to facilitate the application of BFRP in the field of structural reinforcement of glued wood hollow columns. Ten glued laminated wood hollow columns of the same size were designed and placed into five groups (ZC1 and ZRC2 to ZRC5), of which one group (ZC1), with a total of two pure wooden columns, was not arranged with BFRP, and the remaining two wooden columns in each group were arranged with BFRP at different distances. The destruction mode, ultimate load capacity, load–displacement curve, load–strain curve, and ultimate load capacity–total area of the BFRP paste curve of each specimen were obtained by conducting axial compression tests on five groups of wood columns reinforced with different basalt fiber cloths, which revealed the damage mechanism, the relationship between the ultimate load capacity and total area of BFRP paste, and pointed out the most effective area ratio. The test results show that the destruction mode of axially pressed, glued, laminated wood hollow columns is typical compression buckling damage, mainly manifested as follows: the wood at the middle or end of the specimen under pressure first buckles; then, with the increase in load, the specimen is crushed; at this time, the maximum ultimate bearing capacity of each specimen is in the range of 296.77~375.85 kN, the maximum longitudinal displacement is in the range of 2.77~3.38 mm, and longitudinal cracks appear at the end. It is worth noting that the growth rate of the ultimate bearing capacity varies with the increase in the total area of the BFRP paste. When the total area of the BFRP paste is less than a 3.2 × 105 mm2 range value, the growth rate of the ultimate bearing capacity is faster, and then, the growth rate gradually becomes slower. The optimum BFRP paste area ratio can be taken as k = 0.59. The ultimate bearing capacity after reinforcement increases from 11.06% to 26.65% compared with the pure wood column. According to GB50005-2017, “wood structure design standards” improve the hollow wood column bearing capacity calculation method and fit the BFRP reinforced hollow wood column’s ultimate bearing capacity calculation formula; the errors are within ±10%, which can provide a reference for the practical application of BFRP in the field of reinforcing glued wood hollow cylindrical structures.

Effective length of bamboo-like stiffened hollow cylindrical structures

ABSTRACT Hollow cylindrical structures are susceptible to local buckling because they flatten and significantly reduce their stiffness when they bend. Therefore, many previous studies aimed to improve the strength of pipelines and building structures were conducted. Our research group has focused on bamboo and has theoretically proven that stiffness anisotropy caused by bamboo's unique nodes and vascular bundles enhances the stiffness of cylindrical structures. In this study, to investigate this analytically, we carried out a finite-element analysis and succeeded in deriving a new dimensionless parameter that the stiffening effect of an anisotropic consideration. This result is applicable to a wide range of cylindrical structures, from thin-walled to thick-walled, and it is expected that bamboo-inspired bionic designs will be proposed in the future.

Comparison between methods for indirect assessment of buildability in fresh 3D printed mortar and concrete

This paper presents a comparison between indirect methods for assessing the buildability of 3D printed cementitious materials, including constant rotational velocity (CRV) or constant shear rate (CSR) test using rotational rheometry, unconfined uniaxial compression test (UUCT), a newly proposed confined uniaxial compression test (CUCT), and fast penetration test. The experimental program was conducted on the extruded samples of six printable mortars and two printable concretes with various rheological behavior achieved by the use of different additives and admixtures. Predictions of the material failure and the stability failure in hollow cylindrical structures are provided and compared with the results of the direct printing test. Benefits and disadvantages of the employed test methods are discussed, also taking into consideration a perspective of their use for automated in-situ control of the materials' buildability.

Optical Induction and Erasure of Ferroelectric Domains in Tetragonal PMN‐38PT Crystals

AbstractPT‐relaxor ferroelectrics exhibit excellent piezoelectric and quadratic nonlinear optical properties, making them prominent candidates for realization of phononic and nonlinear photonic crystals which rely on spatially patterned ferroelectric domains. However, formation of domain patterns, especially in three dimensions, has been challenging. This paper presents the first experimental demonstration of localized ferroelectric domains and their 2D and 3D patterns inside 0.62Pb(Mg1/3Nb2/3)O3‐0.38PbTiO3 (PMN‐38PT) single‐domain crystals engineered with focused near‐infrared femtosecond laser pulses. Two types of domains are optically induced. Primary domains are formed in the focal volume of the beam, and secondary domains appearing at higher laser power, in the shape of hollow cylindrical structures, are formed around the beam. A physical mechanism of optical domain inversion involving thermoelectric and space charge fields is proposed. This study contributes to a deeper understanding of domain formation and structuring in PMN‐PT relaxor‐based ferroelectrics, paving the way to integrate electromechanical, acoustic, and nonlinear optical effects in a single crystal.

Carbon Nanotubes/Regenerated Silk Composite as a Three-Dimensional Printable Bio-Adhesive Ink with Self-Powering Properties.

In this study, regenerated silk (RS) obtained from Bombyx Mori cocoons is compounded with carboxyl-functionalized carbon nanotubes (f-CNTs) in an aqueous environment for the fabrication of functional bio-adhesives. Molecular interactions between RS and carboxyl groups of CNTs result in structural increase of the β-sheet formation, obtaining a resistant adhesive suitable for a wet biological substrate. Moreover, the functionalization of CNTs promotes their dispersion in RS, thus enabling the production of films with controlled electrical conductivity. The practical utility of such a property is demonstrated through the fabrication of a piezoelectric device implanted in a rat to monitor the breathing in vivo and to be used as a self-powered system. Finally, RS/f-CNTs were used as a printable biomaterial ink to three dimensionally print bilayer hollow tubular structures composed of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and RS. Initial tests carried out by seeding and growing human skin fibroblasts demonstrated that the 3D printed bilayer hollow cylindrical structures offer a suitable surface for the seeded cells to attach and proliferate. In general, the herein proposed RS/f-CNT composite serves as a versatile material for solvent-free dispersion processing and 3D printing, thus paving a new approach to prepare multifunctional materials with potential applications of great interest in sealing biological substrates and implantable devices for regenerative medicine.

Transient thermo-mechanical analysis of FGM hollow cylindrical structures involving micro-scale effect

Thermo-mechanical properties of the functionally graded materials (FGMs) are the pivotal role to improve their service lives exposed to some extraordinary thermal circumstances. An analytical procedure to explore the thermo-mechanical interaction involving the micro-scale effect is proposed for the first time in this work. The governing equations are firstly constructed in a cylindrical coordinate in the context of the generalized Chandrasekharaiah–Tzou theory (C–T theory). An asymptotic approach, based on the Laplace transform technique and its limit theorem, is then employed to solve these equations analytically, in which a common linearization technique is prior to introduce to disperse the non-linear terms involving variable material properties with different gradient patterns. The layer-formed solutions of a typical FGM hollow cylindrical structure with its inner boundary subjected to a sudden temperature rise is finally obtained and validated. A detailed parametric study has been conducted to explore the effect of the micro-structure interaction, physical properties distribution patterns, and the structure size on the thermo-mechanical response. The results state that the effect of micro-structure interaction mainly focuses on the thermal wave propagation and is more significant for the ceramic-rich case. The delay effect on the heat transport induced by thermal inertia is also wakened significantly by the micro-structure interaction, which leads to a larger range of thermo-elastic response and smaller peak stress.

Non-Contact Quantification of Longitudinal and Circumferential Defects in Pipes using the Surface Response to Excitation (SuRE) Method

Rapid screening and monitoring of hollow cylindrical structures using active guided-waves based structural health monitoring (SHM) techniques are important in chemical, petro-chemical, oil and gas industries. Successful implementation of the majority of these techniques in the SHM of pipes depends on the identification of the appropriate guided-waves modes and their frequencies for each application. The highly dispersive nature of the guided-waves and presence of multi modes at each frequency makes the mode selection and the interpretation of signals a challenging task. The surface response to excitation (SuRE) method was developed to detect the defects and loading condition changes on plates with minimum dependence on the excitation of particular modes at certain frequencies. In the present study, the SuRE method is proposed for quantification of longitudinal and circumferential defects, with varying severities, as common examples of axisymmetric and nonaxisymmetric defects in pipes. The results indicate that the SuRE method can be used effectively for damage quantification in hollow cylinders.

Excitation and Propagation of Guided Waves in Multilayer Hollow Cylinders Using PWAS Transducers: A Theoretical and Experimental Study

In this paper, the excitation and propagation of guided waves in multilayer hollow cylinders with piezoelectric wafer active sensor (PWAS) transducers were modeled with the normal mode expansion (NME) method using the semi-analytical finite element (SAFE) formulation. The theoretical development of SAFE for hollow cylindrical structures was introduced and used to obtain guided-wave mode shapes and dispersion curves of multilayer hollow cylinders. The SAFE discretization was applied across the thickness. The layers present in the cylinder were modeled by grouping the elements in the region corresponding to the respective layers. Each finite element region was given the property of the layer that it represented. The number of elements in a layer was determined through convergence studies. The PWAS excitation effect, introduced using the ideal-bonding assumption, was represented by a line-force acting on the PWAS boundary. The SAFE-NME solution obtained in the wavenumber domain was resolved in the physical domain through inverse Fourier transform and residue theorem. Experimental validation of theoretical prediction was performed by comparison with scanning laser Doppler vibrometer (SLDV) measurements from a “6-inch schedule-40” pipe of 11 mm thickness installed with a 7-mm square PWAS transducer for wave excitation. Numerical prediction of the guided wave propagation emanating from the PWAS was first performed and wavefront visualization was obtained. An SLDV area scan of the guided waves generated by the PWAS was then performed and compared with numerical predictions. A good match between experiment and prediction was observed.

A variable-frequency bidirectional shear horizontal (SH) wave transducer based on dual face-shear (d24) piezoelectric wafers

Focusing the incident wave beam along a given direction is very useful in guided wave based structural health monitoring (SHM), as it will not only save input power but also simplify the interpretation of signals. Although the fundamental shear horizontal (SH0) wave is of practical importance in SHM due to its non-dispersive characteristics so far there have been very limited transducers which can control the radiation patterns of SH0 wave. In this work, a variable-frequency bidirectional SH0 wave piezoelectric transducer (BSH-PT) is proposed, which consists of two rectangular face-shear (d24) PZT wafers. The opposite face-shear deformation of the two PZT wafers under applied electric fields makes the BSH-PT capable of exciting SH0 wave along two opposite directions (0° and 180°). Both finite element simulations and experimental testings are conducted to examine the performance of the proposed BSH-PT. Results show that pure SH0 wave can be generated by this BSH-PT and its wave beam can be focused bi-directionally. Moreover, the bidirectional characteristics of the BSH-PT can be kept over a wide frequency range from 150 kHz to 250 kHz. As the circumferential SH0 (CSH0) wave in a thin hollow cylindrical structure is essentially equivalent to the SH0 wave in a plate, the proposed BSH-PT may also be very useful to develop a CSH0-wave-based SHM system for hollow cylindrical structures.

Multidirectional Estimation of Arterial Stiffness Using Vascular Guided Wave Imaging with Geometry Correction

We previously found that vascular guided wave imaging (VGWI) could non-invasively quantify transmural wall stiffness in both the longitudinal (r–z plane, 0°) and circumferential (r–θ plane, 90°) directions of soft hollow cylinders. Arterial stiffness estimation in multiple directions warrants further comprehensive characterization of arterial health, especially in the presence of asymmetric plaques, but is currently lacking. This study therefore investigated the multidirectional estimation of the arterial Young's modulus in a finite-element model, in vitro artery-mimicking phantoms and an excised porcine aorta. A longitudinal pre-stretch of 20% and/or lumen pressure (15 or 70 mm Hg) was additionally introduced to pre-condition the phantoms for emulating the intrinsic mechanical anisotropy of the real artery. The guided wave propagation was approximated by a zero-order antisymmetric Lamb wave model. Shape factor, which was defined as the ratio of inner radius to thickness, was calculated over the entire segment of each planar cross section of the hollow cylindrical structure at a full rotation (0°–360° at 10° increments) about the radial axis. The view-dependent geometry of the cross segment was found to affect the guided wave propagation, causing Young's modulus overestimation in four angular intervals along the propagation pathway, all of which corresponded to wall regions with low shape factors (<1.5). As validated by mechanical tensile testing, the results indicate not only that excluding the propagation pathway with low shape factors could correct the overestimation of Young's modulus, but also that VGWI could portray the anisotropy of hollow cylindrical structures and the porcine aorta based on the derived fractional anisotropy values from multidirectional modulus estimates. This study may serve as an important step toward 3-D assessment of the mechanical properties of the artery.

Estimation of photonic band gap in the hollow core cylindrical multilayer structure

The propagation characteristic of two hollow core cylindrical multilayer structures having high and low refractive index contrast of cladding regions have been studied and compared at two design wavelengths i.e. 1550 nm and 632.8 nm. With the help of transfer matrix method a relation between the incoming light wave and outgoing light wave has been developed using the boundary matching technique. In high refractive index contrast, small numbers of layers are sufficient to provide perfect band gap in both design wavelengths. The spectral position and width of band gap is highly depending on the optical path of incident light in all considered cases. For sensing application, the sensitivity of waveguide can be obtained either by monitoring the width of photonic band gap or by monitoring the spectral shift of photonic band gap. Change in the width of photonic band gap with the core refractive index is larger in high refractive index contrast of cladding materials. However, in the case of monitoring the spectral shift of band gap, the obtained sensitivity is large for low refractive index contrast of cladding materials and further it increases with increase of design wavelength.