High-pressure Homogenization Research Articles

Rice husk nanocellulose: Extraction by high-pressure homogenization, chemical treatments and characterization

Rice husk is a substantial agricultural by-product of rice milling and has potential as a rich source of cellulose. This cellulose can be synthesized into nanocellulose materials. In this study, rice husk nanocellulose materials were synthesized by high-pressure homogenization (HPH) or acid hydrolysis (AH) combined with HPH (AH+HPH) treatments with different HPH cycles (6, 9 and 12 cycles at 120 MPa). Various physicochemical techniques were employed to investigate the nanocelluloses. It was found that the number of HPH cycles directly affected the particle size, crystallinity index and thermal stability of nanocellulose samples. The mean diameter and length of the nanocellulose were 10.15–12.42 nm and 602.13–620.08 nm for HPH samples and 11.94–12.34 nm and 436.22–440.04 nm for AH+HPH treatment. The crystallinity index of the nanocellulose ranged from 62% to 72%. Morphological characterization of nanocellulose treated with HPH and AH+HPH revealed the successful production of cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs). EDX analysis confirmed that the nanocellulose comprised 40.06–42.34% carbon and 50.07–54.56% oxygen as the main mineral elements. Therefore, this research offers an alternative strategy to enhance the value of rice husks and facilitate the utilization in the food system for future research.

Anti-obesity effects of chlorogenic acid and caffeine- lipid nanoparticles through PPAR-γ/C/EBP-ɑ pathways.

Obesity is considered one of the most crucial health problems of the century. Therefore, reducing obesity is critically important. Caffeine (CF) and chlorogenic acid (CLA), which are substantial components in green bean coffee which maximize thermogenesis in brown adipose tissue. In our study, we have prepared CF, CLA, and CF + CLA loaded-solid lipid nanoparticles (SLN) since the SLNs are cost-effective, tissue-localized, and highly stable. The central composite design model was preferred to select the optimized formulation. UHPLC was used for quantification related to the CF and CLA amounts. The high-pressure homogenization (HPH) method was used while SLN formulations were prepared in the presence of poloxamer® 407 (surfactant) and Compritol® 888 ATO (solid lipid). The nanoparticles were characterized, followed by the utilization of 3T3-F442A cell lines for the evaluation of the adipogenesis activity of the formulations. Then, rt-PCR and ELISA studies of adipogenic markers were conducted. After optimal formulations were selected with an average of 110.2 ± 0.1 nm, CF (1 mM) + CLA (0.5 mM)-loaded SLN formulation has been proven significantly effective by using PPAR-γ/C/EBP-a pathways. In a nutshell, our study has shown that CF + CLA loaded-SLN has been affected 45.8% times more than regular extracted coffee (p < 0.05) on the adipocyte cells.

Conversion of Materials and Energy in Anaerobic Digestion of Sewage Sludge with High-Pressure Homogenization Pretreatment

High pressure homogenization (HPH) pretreatment can improve sludge anaerobic digestion; however, the relationship among the material, energy conversion, and gas production efficiency was unclear under different operating conditions in sludge anaerobic digestion by HPH pretreatment. In this study, the performance of HPH pretreatment before sludge anaerobic digestion was investigated, and the relationship among the material, energy conversion, and gas production efficiency was explored. HPH pretreatment induced organic solubilization, and a maximum soluble chemical oxygen demand (SCOD)/total chemical oxygen demand (TCOD) of about 30% was achieved. Results showed that HPH pretreatment significantly improved the biogas production of sludge anaerobic digestion; the maximum increase in CH4 yield was 57%; and the anaerobic digestion period was shortened by about 10 days. The ratio of CH4 yield increment to volatile dissolved solids (VDS) increment was 0.21 mL/mg. The CH4 yield increment of 1 L/g volatile solid (VS) required a specific energy of 0.10 MJ/kg total solid (TS) by increasing the pressure with one cycle and 0.72 MJ/kg TS by increasing the cycle at 60 MPa. The minimum additive energy consumption of HPH pretreatment was 125 J/mL CH4 yield increment at 20 MPa with one cycle. Considering CH4 yield improvement and energy conservation, HPH pretreatment should maintain a pressure of no more than 60 MPa in one cycle. This study provides a theoretical reference for the practical application of HPH pretreatment in anaerobic digestion. HPH holds promise as a potential strategy for sewage sludge pretreatment to produce CH4 in anaerobic digestion.

Enhancing starch nanocrystal production and evaluating their efficacy as fat replacers in ice cream: Investigating the influence of high pressure and ultrasonication

A preparation method involving the combination of high-pressure homogenization and ultrasound (HPH-US) techniques was employed to produce starch nanocrystals (NCs) from three botanical starch sources: chestnut, corn starch, and potato starch. The optimal conditions, determined using response surface methodology, consisted of a homogenization pressure of 60 MPa and ultrasound at 280 W for 30 min. The utilization of dynamic light scattering (DLS) and transmission electron microscopy (TEM) unveiled that the resulting starch particles exhibited nanometric dimensions ranging from 135.36 to 203.47 nm. The mechanical forces generated by the HPH-US treatment significantly enhanced the physicochemical properties of the starch NCs, leading to a partial disruption of the crystalline structure. Moreover, the potential application of the synthesized starch NCs as fat replacers (FRs) was investigated. As the degree of substitution increased, notable improvements were observed in the hardness and viscosity of ice cream, accompanied by a reduction in the melting rate. The overall sensory evaluation indicated that corn starch NCs held substantial promise as a viable alternative FR for enhancing the quality of ice cream.

Nanostructured Lipid Carriers to Enhance the Bioavailability and Solubility of Ranolazine: Statistical Optimization and Pharmacological Evaluations.

Chronic stable angina pectoris is the primary indication for ranolazine (RZ), an anti-anginal drug. The drug has an anti-ischemic action that is unaffected by either blood pressure or heart rate. Due to the first-pass effect, the drug has a reduced bioavailability of 35 to 50%. The study emphasized developing a novel transdermal drug delivery system of nanostructured lipid carriers (NLCs) for delivering RZ. Many pharmaceutical companies employ lipid nanoparticles as biocompatible carriers for medicinal, cosmetic, and biochemical uses. These carriers are appropriate for many applications, such as topical, transdermal, parenteral, pulmonary, and oral administration, because of the large variety of lipids and surfactants that are readily available for manufacturing. RZ NLCs were made using high-pressure homogenization. Statistical analysis was utilized to find the best formula by varying the concentrations of Precirol ATO 5 (X1), oleic acid (X2), and Tween 80 (X3). Variables such as entrapment effectiveness (EE) (Y1), particle size (Y2), polydispersity index (PDI) (Y3), and zeta potential (Y4) were tested. A variety of tests were performed on the new formulation to ascertain how well it would be absorbed in the body. These tests included in vivo absorption studies, skin permeability assessments, in vitro drug release assessments, and physicochemical analyses. The particle size of RZ-NLCs was shown to be very small (118.4 ± 5.94 nm), with improved EE (88.39 ± 3.1%) and low ZP and PDI (-41.91 ± 0.38 and 0.118 ± 0.028). SEM and TEM analysis confirmed the structure of the NLCs and showed a smooth, spherical surface. Improved RZ-NLCs were used to create NLC gel, which was then tested for elasticity both physically and rheologically. The formulation's elasticity was investigated. Optimized RZ-NLCs and NLCG were found to have transdermal fluxes of 48.369 g/cm2/h and 38.383 g/cm2/h, respectively. These results showed that the transdermal delivery of RZ distribution through NLC's transdermal gel had more significant potential. According to in vivo experiments, the drug's bioavailability in Wistar rats increased when it was delivered through NLCs. The findings demonstrated that NLCs loaded with RZ successfully transported the RZ to the designated site with no interruptions and that a quadratic connection existed between the independent and dependent variables.

Formulation and Scale-up of Delamanid Nanoparticles via Emulsification for Oral Tuberculosis Treatment.

Delamanid (DLM) is a hydrophobic small molecule therapeutic used to treat drug-resistant tuberculosis (DR-TB). Due to its hydrophobicity and resulting poor aqueous solubility, formulation strategies such as amorphous solid dispersions (ASDs) have been investigated to enhance its aqueous dissolution kinetics and thereby improve oral bioavailability. However, ASD formulations are susceptible to temperature- and humidity-induced phase separation and recrystallization under harsh storage conditions typically encountered in areas with high tuberculosis incidence. Nanoencapsulation represents an alternative formulation strategy to increase aqueous dissolution kinetics while remaining stable at elevated temperature and humidity. The stabilizer layer coating the nanoparticle drug core limits the formation of large drug domains by diffusion during storage, representing an advantage over ASDs. Initial attempts to form DLM-loaded nanoparticles via precipitation-driven self-assembly were unsuccessful, as the trifluoromethyl and nitro functional groups present on DLM were thought to interfere with surface stabilizer attachment. Therefore, in this work, we investigated the nanoencapsulation of DLM via emulsification, avoiding the formation of a solid drug core and instead keeping DLM dissolved in a dichloromethane dispersed phase during nanoparticle formation. Initial emulsion formulation screening by probe-tip ultrasonication revealed that a 1:1 mass ratio of lecithin and HPMC stabilizers formed 250 nm size-stable emulsion droplets with 40% DLM loading. Scale-up studies were performed to produce nearly identical droplet size distribution at larger scale using high-pressure homogenization, a continuous and industrially scalable technique. The resulting emulsions were spray-dried to form a dried powder, and in vitro dissolution studies showed dramatically enhanced dissolution kinetics compared to both as-received crystalline DLM and micronized crystalline DLM, owing to the increased specific surface area and partially amorphous character of the DLM-loaded nanoparticles. Solid-state NMR and dissolution studies showed good physical stability of the emulsion powders during accelerated stability testing (50 °C/75% RH, open vial).

Fabrication and functional attributes of nanotherapeutically engineered system for co-administration of adapalene and lycopene for enhanced acne management: an in vitro and in vivo investigation

BackgroundAcne vulgaris is caused due to several different biological, environmental and specific pathological factors, resulting in secretion of unregulated amount of sebum by the sebaceous glands. Acne is thought to be a minor, self-restraint, puberty leading and hormone-induced cosmetic disorder. It significantly affects the quality of life leading to social disengagement, anxiety, depression, necessitating its therapeutic management in due course of time. Thus, despite not being fatal it has social and mental impact on individual’s life. Pathogenesis of acne is complex and multifactorial involving diverse physiological, environmental factors and significant role of propionibacterium acne. Retinoids have been used as preferred first-line therapy for treatment of acne, but they have many limitations. Adapalene has found to be acting synergistically with other drugs like benzoyl peroxide, salicylic acid, clindamycin, etc., and various other topical antioxidants.ResultsThe study investigates the formulation and characterization of novel nanostructured lipid vesicles (NLVs) co-loaded with adapalene and lycopene, through topical gel. The high-pressure homogenization method was used to prepare nanostructured lipid vesicles followed by incorporation into hydrophilic gel vehicle. This novel system was scientifically tested for various evaluation parameters like size and vesicle size distribution, polydispersity index, drug entrapment efficiency and in vitro drug release characteristics, along with rheological behavior of formulation gel. Skin permeation and biodistribution characteristics through skin were also evaluated, and better localization of drug in dermis and reduced systemic penetration were the key observation in prepared formulation.ConclusionThe simultaneous co-administration of lycopene resulted in an additive effect in therapeutic management of acne. It can be predicted that this novel NLVs-based gel along with synergistic effect of lycopene will definitely result in better therapeutic efficacy and reduced systemic adverse effects of adapalene. This combination can be explored as future alternative for acne therapy.

Modifications to structural, techno-functional and rheological properties of sesame protein isolate by high pressure homogenization

In this study, we aimed to determine the effect of high pressure homogenization (HPH) at a pressure up to 150 MPa on microstructural, techno-functional and rheological properties of sesame protein isolate (SPI). HPH treatment caused a partial change in the secondary structure of SPI, however, the changes in surface hydrophobicity and free –SH groups, indicating HPH had significant effect on the tertiary structure. After the HPH treatment, the particles dispersed homogeneously with more rougher surface. Sesame proteins had the smallest particle size (0.79 μm) and highest zeta potential (38.83 mV) at 100 MPa pressure. The most developed water/oil holding capacity, emulsification and foaming properties were achieved at 100 MPa pressure. However, the maximum stable foam formation (83.33 %) was determined at 150 MPa pressure. When the shear rate is fixed as 50 1/s, an increase in the viscosity value of the samples treated with 100 and 150 MPa pressure was detected compared to the control sample, while the lowest viscosity was determined the ones treated at 50 MPa. In all samples except 50 MPa pressure-treated proteins, viscoelastic character became dominant with increasing frequency (G′ > G″). Modification with HPH resulted in a decrease of about 15 °C in the gelation temperature of SPI.

Rational Design, Synthesis, and Characterization of a Solid Δ9-Tetrahydrocannabinol Nanoformulation Suitable for "Microdosing" Applications.

Background: This article highlights the formulation of a solid Δ9-tetrahydrocannabinol (THC)-loaded ingestible prepared from pure THC distillate. Methods: A THC-containing ethanol-assisted cannabinoid nanoemulsion (EACNE) was created using a solvent displacement technique. Subsequently, the EACNE was converted to a solid powdery material while still retaining its THC potency, a format uniquely suited for "microdosing" applications. Results: EACNE had an average lipid droplet size of ∼190 nm, with a polydispersity index of 0.15, and an average droplet ζ potential of -49±10 mV. The nanoemulsion (NE) was colloidally stable for at least 6 weeks, with no meaningful change in cannabinoid potency over the experimental period, as determined by high-performance liquid chromatography analysis. The EACNE remained stable when subjected to physical stresses such as heat, freeze/thaw cycles, carbonation, dilution to beverage concentrations, high sucrose concentrations, and a pH range between 5 and 8. The microencapsulated EACNE demonstrated limited free-flowing behavior but was freely redispersible in water without any visible phase separation. Conclusions: We report the design, creation, and characterization of a THC NE generated without the use of specialized equipment, such as a microfluidizer or a high-pressure homogenizer. This emulsion could readily be converted to a water-redispersible powder. This embodiment is particularly suited for THC "microdosing," a practice that might decouple the health benefits of THC from its psychotropic effects.

Improvement of delivery properties of soybean 7S protein by high-pressure homogenization: In the case of curcumin

In this study, curcumin@high-pressure homogenization-soybean 7S protein/nanoparticles (CUR@HPH-7S-NPs) were prepared by an anti-solvent method. The physicochemical properties results showed at a CUR concentration of 4 mg/mL, CUR@HPH-7S-NPs had better size, encapsulation efficiency (EE), and zeta-potential values of 151.9 nm, 88.80 %, and −23.1 mV, respectively. Fourier transforms infrared (FTIR) and endogenous fluorescence spectroscopy results indicated CUR bound to HPH-7S through hydrophobic interactions, and the force between HPH-7S and CUR molecules was greater than that between untreated 7S protein and CUR. Furthermore, the pH stability results showed the size of CUR@HPH-7S-NPs was barely affected by pH away from adjacent area of the isoelectric point of 7S protein. The physical thermal stability and bio-accessibility results suggested that HPH-7S was more effective in delaying the degradation, had more physical thermal stability, and had a significant improvement in the bio-accessibility of CUR than that of untreated 7S protein. What's more, the antioxidant activity results showed at a CUR equivalent concentration of 40 μg/mL, the DPPH and ABTS radical scavenging activity of CUR@HPH-7S-NPs was 85.10 % and 96.64 %, respectively, both of which were significantly higher than that of free CUR. Finally, this study aimed to provide a theoretical basis for the delivery of other hydrophobic bioactive substances.

Blending Ethnomedicine with Modern Technology-From Conventional to Tailored Products: Modulating Biopharmaceutical Properties of Berberis Extract by Solid Lipid Nanoparticles for Wound Healing.

Drug-delivery systems employing phytopharmaceuticals based on the leads in traditional knowledge offers not only an alternative but quicker and more economic strategy for drug development. Nanophytopharmaceuticals promise remarkable opportunities with the ability to overcome challenges associated with herbal medicines, such as low solubility and bioavailability, poor target specificity, and shelf life. Berberis extracts documented as Ropana (wound healer) in Sushruta Samhita are a popular traditional remedy that is amiss in the modern system of medicine as it exhibits very poor biopharmaceutical properties. Poor solubility and bioavailability necessitate the administration of high doses to achieve the desired therapeutic effects. Exploiting the diversified type of compounds with pleiotropic properties present in Berberis, the biopharmaceutical properties were engineered using an optimized freeze-dried extract and developed solid lipid nanoparticles (SLNs) as an effective drug-delivery system. An industrially viable and environment-friendly hot high-pressure homogenization technique led to a stable formulation with an average particle size of 178.4 nm, as well as a 7-fold increase in loading and a significant entrapment of 91 ± 1.25%. The pharmacodynamic studies of developed nanosystems in excision-wound models showed faster and complete healing of wounds with no scars.

Development of bean-based emulgels for 3D printing applications: Feasibility for dysphagia diets

Emulgels could be used as edible inks for individuals with special needs. The purpose of this work was to formulate a 3D printable low-oil emulgel by evaluating the effect of incorporating gelatin in a bean-based nanoemulsion stabilized by high-pressure homogenization (HPH) suitable for a dysphagia diet. The effect of physicochemical properties and printing parameters of the emulsion network were evaluated for printability, dimensional stability, and textural properties. HPH produced stable nanoemulsions using pressures >200 MPa and 5% bean protein. Adding gelatin decreased NH and COO vibrations, increased hydrogen bonding, and created self-supporting emulgels when the gelatin concentration was >1.5%. Printing performance, dimensional stability, and textural properties depended on the gelatin concentration and printing parameters, whose improvement enabled precise, time-stable, and swallow-safe shapes with 2.5% gelatin. In conclusion, stable emulgels can be used in 3D printing, facilitating the design of colloidal food systems with customized textures and nutritional properties for individuals with dysphagia.

Fabrication of nanoemulsion stabilized by high-pressure modified soy protein isolate-genistein for the encapsulation of lutein

In this study, we evaluated the interaction between high-pressure homogenization modified soybean isolate protein (HSPI) and genistein (GE), and constructed nanoemulsions for the co-encapsulated of GE and lutein using HSPI-GE as emulsifier. SPI formed complexes with GE mainly through hydrophobic interactions, and high-pressure homogenization treatment improved the interaction between SPI and GE. When the homogenization pressure was 120 MPa, the emulsification activity and emulsion stability indexes of HSPI-GE reached 196.71 m2g-1 and 237.98min, and the zeta potential of HSPI-GE nanoemulsion was −34.15 mV. Additionally, the encapsulation efficiency of HSPI-GE nanoemulsion was up to 93.88% and its storage stability was up to 66.01% after 20 d of storage. The HSPI-GE nanoemulsions achieved slow release of co-encapsulated GE and lutein and improved their bioaccessibility to 74.47% and 80.46% in in vitro simulated digestion. This work provides a theoretical basis for further studies on the application of HSPI-GE in lutein delivery systems.

Oil structuring through capillary suspensions prepared with wheat middlings micronized directly in oil by high-pressure homogenization

Oleogels have been proposed as suitable systems for replacing unhealthy saturated fats in food preparations. This study aimed to structure sunflower oil through capillary suspensions using wheat middlings (WM), a residue of the wheat milling process, as the solid fraction with structuring properties. For the first time, high-pressure homogenization (HPH) was applied directly to WM dispersed in oil to reduce particle size, activate fibers, and release high-value intracellular compounds into sunflower oil. The optimized formulation of WM-in-oil-suspensions was then used to prepare capillary suspensions by adding water as a secondary immiscible fluid. Water addition drastically altered the rheological behavior and strength of oil suspensions due to the establishment of capillary forces and formation of a percolating particle network. The strength of capillary bridges depended on the particle size distribution and surface properties of WM particles and the fraction of added water (ranging between 5 and 80% v/v with respect to oil). The oil suspension at 30% w/w of HPH-treated WM solid fraction (80 MPa for 20 equivalent passes) with the addition of 50% v/v of water exhibited an apparent "transitional" yield stress >300 Pa, corresponding to gel-like behavior. Additionally, HPH treatment released antioxidant compounds contained in the solid matrix into the system. These results highlight that the resulting capillary suspension is a promising material for formulating healthier and more sustainable food products as an alternative to solid fats, with potential applications based on reduced overall caloric content and added health benefits related to dietary fiber.

Dexamethasone acetate nanocrystals: characterization and dissolution studies in presence of polymorphic phases.

A drug with poor water-solubility, like Dexamethasone acetate, can present lower bioavailability conventional for pharmaceutical formulations, and the presence of polymorphs in the raw material can lead to drug quality problems. In this study, nanocrystals of dexamethasone acetate were synthesized by high pressure homogenizer (HPH) method in surfactant poloxamer 188 (P188) solid dispersion and the bioavailable in raw material with polymorphism presence was evaluated. The powder pre-suspension was prepared by the HPH process, and the nanoparticles formed were incorporated in P188 solutions. The nanocrystals formed were characterized by techniques of XRD, SEM, FTIR, thermal analysis by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), dynamic light scattering (DLS) to analyze the particle size and zeta potential, and in vitro evaluation by dissolution studies. The characterization techniques were adequate to show the presence of raw material with physical moisture between two dexamethasone acetate polymorphs. The nanocrystals formed in the presence of the P188 in the formulation showed a considerable increase in the rate of dissolution of the drug in the medium and in the size of the stable nanocrystals, even in the presence of dexamethasone acetate polymorphs. The results showed that it was possible to produce dexamethasone nanocrystals by HPH process with regular size by the presence of the small amount of P188 surfactant. This article presents a novelty in the development of dexamethasone nanoparticles that have different polymorphic forms in their physical composition.

Inclusion complexes of clove essential oil with sodium caseinate and gum arabic prepared by high-pressure homogenization: Characterization and non-contact antimicrobial activity

Inclusion complexes of clove essential oil with sodium caseinate and gum arabic prepared by high-pressure homogenization: Characterization and non-contact antimicrobial activity

Designing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) films with tailored mechanical properties

Increasing the 3HV molar fraction up to 45 mol% in the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) monomeric composition is assumed to improve the ductility of P(3HB-co-3HV)-based materials. The objective of the paper was to assess how the polymer recovery treatment and the melt processing temperature could counterbalance this effect. For that purpose, copolymers with different 3HV contents (18, 28 and 40 mol%) and recovered both using a solvent free high-pressure homogenization (HPH) based treatment and a chloroform-based treatment were used to produce non-formulated and self-supported films by thermopressing. The improvement of ductility with increased 3HV content was confirmed whatever the recovery treatment. Lower elongation at break values were obtained for HHP-based extracted copoplymers, due to the presence of impurities, including non-PHAs cell mass, that favored thermal degradation during the film shaping process. An in-depth study by differential scanning calorimetry (DSC) analysis of the melt crystallization behavior, coupled to observations in polarized optical microscopy (POM), allowed to predict the optimal processing temperature, i.e. the temperature allowing the formation of microstructures in favor of improved ductility. Tensile properties were discussed in relation to the thermal properties and crystalline structure of copolymers evaluated by wide-angle and small-angle X-ray scattering analyses (WAXS/SAXS).

High-Lignin-Containing Cellulose Nanofibrils from Date Palm Waste Produced by Hydrothermal Treatment in the Presence of Maleic Acid.

Lignin-containing cellulose nanofibrils (LCNFs) have attracted great attention because the presence of lignin brought additional merits to cellulose nanofibrils including hydrophobicity, ultraviolet (UV)-shielding capacity, and reduced water sensitivity. In the present work, LCNFs with lignin content up to 21 wt % were prepared with a high yield exceeding 70 wt %, from neat date palm waste, by a hydrothermal treatment (HTT) at 120-150 °C in the presence of 20-30 wt % maleic acid, followed by high-pressure homogenization. The chemical composition, degree of polymerization, morphology, and colloidal and rheological properties of the LCNFs were investigated to understand how the HTT in the presence of MA affected the properties of the resulting LCNFs. Nanopapers prepared from the LCNF suspensions exhibited mechanical properties lower than those from lignin-free CNF-based nanopapers, yet with decreased hydrophilicity. A mechanism explaining how the HTT in the presence of MA facilitated the disintegration of the biomass into nanoscale material was proposed. Overall, the present work demonstrated a feasible and scalable approach for the sustainable production of LCNF suspensions from neat agricultural residues, with a high yield and a high lignin content, without any need to perform a preliminary partial delignification.

Structural and Physical Properties of Alginate Pretreated by High-Pressure Homogenization.

To develop a high-efficient extraction method, we investigated the use of high-pressure homogenization (HPH) as a novel pretreatment technology for the extraction of sodium alginate (SA) from Laminaria japonica. After the single-factor experiment, the results demonstrated that under the conditions of 100 MPa HPH pressure, 4 cycles, pH 6.0, and 0.5% EDTA for 3.0 h, the optimized extraction yield of HPH reached 34%. To further clarify the effect on the structural properties of HPH-extracted SA, we conducted comprehensive analysis using SEM, FTIR, MRS, NMR, XRD, TGA, and a T-AOC assay. Our findings revealed that HPH pretreatment significantly disrupted the structure of L. japonica cells and reduced their crystallinity to 76.27%. Furthermore, the antioxidant activity of HPH-extracted SA reached 0.02942 mgVceq∙mg-1. Therefore, the HPH pretreatment method is a potential strategy for the extraction of alginate.

The changed structures of Cyperus esculentus protein decide its modified physicochemical characters: Effects of ball-milling, high pressure homogenization and cold plasma treatments on structural and functional properties of the protein

Three physical treatments, including ball-milling (BM), high pressure homogenization (HPH) and cold plasma (CP) were applied to modify structural and functional properties of Cyperus esculentus protein (CEP). The results showed that three treatments significantly altered morphology and reduced particle size of CEP. Both primary and secondary structures of CEP were hardly changed, while disulfide bonds and hydrophobic forces between amino acid residues of CEP were interrupted by three treatments, releasing free sulfhydryls and hydrophobic groups. With the free moiety accumulation, the reformed interactions between them enhanced the crystallinity and thermostability of CEP. Besides, solubility and emulsifying properties of CEP were significantly improved within a certain range of treatment duration and intensity, and three treatments decreased water but increased oil holding capacity of CEP. Conclusively, the modified physicochemical properties of CEP were decided by the changed molecular structures of CEP, and different treatments may satisfy different processing requirements for the protein.