Higher Weight Loss Research Articles

Prevalence and patterns of pre-competition weight loss practices in Chinese Amateur boxers

This study investigated the weight loss (WL) practices of Chinese amateur boxers using the Rapid Weight Loss Questionnaire (RWLQ). A total of 701 (563 males, 138 females) boxers participated in the study and were categorized by sex, age group, and competitive level. Sixty-seven percent of boxers purposefully engaged in WL practices before competition. The average habitual WL was 6.0% (5.8% for juniors and 6.3% for seniors) of body mass (BM), with the average highest WL was 9.5% (9.1% for juniors and 10.1% for seniors) of BM. Most participants (69% for juniors and 84% for seniors) allocated 15+ days for WL before competition. No significant differences in habitual WL%, highest WL%, and rapid weight loss score (RWLS) were found between age groups or competitive levels (all p > 0.05). However, males’ highest WL% and RWLS were significantly higher than females (p < 0.001, p = 0.002, respectively). International boxers began WL later than local boxers (15.5 vs. 14.3 years, p = 0.012). National boxers began WL later than provincial and local boxers (15.6 vs. 14.8 years, p < 0.001; 15.6 vs. 14.3 years, p < 0.001). Increased exercise and training in plastic suits were the most frequently used WL methods. Coaches were identified as the most influential person concerning boxer's WL practices, surpassing doctors or nutritionists. This study found that some WL practices among Chinese boxers differ from those in other sports and countries. Although the prevalence of WL among junior boxers was relatively low, the magnitude of WL was high, warranting more attention in both academic and practical fields.

Weight loss, nutritional aspects and quality of life in head and neck cancer survivors.

ObjectivesComprehensive care is fundamental to cancer survivors enduring long-term side-effects of cancer treatment including nutrition impact symptoms and critical weight loss (CWL). The aim of our study was to address weight loss (WL), nutritional aspects, and quality of life (QoL) in head and neck cancer (HNC) survivors. Study DesignThis was a cross-sectional study of HNC patients treated at the Sapienza University-Hospital, 2018-2022. We administered a modified version of the EORTC-QLQ-H&N35, the National Health and Nutrition Examination Survey for taste disorders, and the Fox Questionnaire for dry mouth. WL was recorded at T0 (before cancer treatment), T1 (right after treatment), and (at follow-up) T2. ResultsAll patients (n=63; 61.9% males) had a median WL of 16.7% (range: 1.4%-44.2%) at T1 and a median of 9.8% (range: 1.8%-45.6%) at T2. Patients with dysgeusia, poor dentition, and those who underwent major orofacial surgery had the highest WL (p<0.05). Patients who received multiple treatment regimens had a higher WL compared to those receiving fewer regimens (p<0.05). Patients with nutritional problems (71.4%) had a lower QoL throughout (p<0.05). ConclusionCWL is an important side effect of HNC treatment and may particularly affect survivors with xerostomia/dysgeusia, poor dentition, and those receiving multiple treatment regimens.

Effect of Calcium Formulations to Increase Yield and Shelf Life of Manjri Naveen Grapes

The application of Calcium at veraison stage maintain the quality of grapes. Hence to evaluate the effect of Calcium formulations for increasing yield and the shelf life of Manjri Naveen grapes. The experiment was designed as randomized block design (RBD) having seven treatments and four replications (1 replicate = 4 vines). Three calcium formulations were used i.e. CaCl2, CaO, Ca(No3)2 as a dose of (2.5 g/l) and (5 g/l). Foliar application of calcium was done 10 days before harvest at veraison stage. Results obtained from the experiment showed the lowest weight loss was found in bunches of calcium oxide and calcium chloride spray treatments (8.14 %), (8.61 %) respectively, while the highest weight loss (10.36 %) occurred in untreated control. The PLW increased significantly at successive from 1.32 % on 1st day to 10.36 % on 7th day of storage at room temperature. CaO at 5 g/l recorded the lowest fallen berries 2.70 (%), followed by Ca(NO3)2 at 2.5 g/l recorded 3.38 (%). It might be due to calcium accumulated mostly in the rachis and less in the flesh during grape berry development. Yield and quality components like bunch weight, berry weight, total yield/vine, TSS, TSS/Acidity ratio were significantly influenced by calcium spray. Hence from this study it is concluded that the foliar application of CaO at 5 g/l was found to be effective for increasing the shelf life and yield of Manjri Naveen grapes.

Predictors of Successful Weight Loss in Extremely Obese Individuals Undergoing Roux-en-Y Gastric Bypass Surgery.

Roux-en-Y gastric bypass (RYGB) is a standard treatment for severe obesity, but some patients do not achieve the expected success in weight loss. The aim of this study was to evaluate possible predictors of weight loss after RYGB. Sixty-three patients were included. Pre- and postoperative data were collected from medical records, including comorbidities, anthropometry, energy/macronutrient intake, and physical activity level (PAL). Variants in the brain-derived neurotrophic factor (BDNF; rs6265) and lysophospholipase like 1 (LYPLAL1; rs4846567) genes were investigated. Excess weight loss (EWL) >50% was considered to be successful weight loss (SWL). Logistic regression models were used to verify predictor variables. Participants' median preoperative body mass index (BMI) was 53 kg/m2 (interquartile range, 46 to 58). At 12 and 24 months after surgery, EWL was 63% and 67%, and the failure rate was 19% and 16%, respectively. The individuals with insufficient weight loss (IWL) after 12 months had higher preoperative weight, BMI, and overweight. At 24 months, lowest frequency of individuals with SWL in the first year was found in the IWL group. No significant differences were found between the groups in dietary intake and PAL. In the logistic regression, high initial BMI was a predictor of the worst response in both periods, and high initial total weight loss was a predictor of a better response at 24 months. The polymorphism analysis did not show differences between groups in either gene. Lower preoperative BMI and greater weight loss at 12 months were predictors of SWL after RYGB.

Condition‐Dependent Female Aggression and Its Effects on Mating Success and Sexual Cannibalism in Jumping Spiders

ABSTRACTPre‐copulatory sexual cannibalism is an extreme form of aggression toward potential mates. In this study, we examined condition‐dependent female aggression and its effects on mating success and frequency of pre‐copulatory sexual cannibalism in the jumping spider Phidippus audax Hentz 1845. We examined two of the leading hypotheses of why sexual cannibalism may occur, (1) female mate choice and (2) adaptive female foraging. We separated 137 adult virgin female P. audax into three feeding treatments: (1) well‐fed spiders, (2) 14‐day food deprived, and (3) 28‐day food deprived. We recorded weight loss (14‐ and 28‐day treatments) and survival rates. We conducted mating trials to measure the proportion of non‐aggressive and aggressive male and female behaviors, male mating success, and pre‐copulatory sexual cannibalism. Females deprived of food had higher weight loss and lower survival rates than well‐fed females. In addition, food deprived female spiders exhibited higher proportions of aggressive behaviors and pre‐copulatory sexual cannibalism, and lower mating success compared to well‐fed spiders. We found that as male size increased females were less likely to cannibalize males, but we found no effect of male body condition on whether a male mated with or was cannibalized by a female. Our results are consistent with the adaptive foraging hypothesis and corroborates prior research on pre‐copulatory sexual cannibalism.

Effect of Time-Restricted Eating on Circulating Levels of IGF1 and Its Binding Proteins in Obesity: An Exploratory Analysis of a Randomized Controlled Trial

Obesity is associated with alterations in circulating IGF1, IGF1-binding proteins (IGFBPs), insulin, inflammatory markers, and hormones implicated in cardiovascular disease, diabetes, cancer, and aging. However, the effects of 4 and 6 h time-restricted eating (TRE) on circulating IGF1 and IGFBPs is uncertain. Objective: This study aimed to investigate the effects of TRE on plasma IGF1, IGFBP1, IGFBP2, and IGFBP3, and whether these effects were mediated by weight loss or body composition changes. Insulin sensitivity, glucose control, adipokines, and inflammatory markers were also examined. Design: An exploratory analysis of an 8-week randomized controlled trial implementing a daily TRE intervention was carried out. Participants/Setting: This study was conducted at the University of Illinois at Chicago in 2019. Participants with obesity were randomized to 4 or 6 h TRE (n = 35) or a control (n = 14) group. Plasma biomarkers were measured by ELISA at baseline and week 8. In a sub-analysis, participants were stratified into higher- (&gt;3.5%) and lower- (≤3.5%) weight-loss groups. Intervention: Participants fasted daily from 7 p.m. to 3 p.m. in the 4 h TRE group (20 h) and from 7 p.m. to 1 p.m. in the 6 h TRE group (18 h), followed by ad libitum eating for the remainder of the day. Controls received no dietary recommendations. Main outcome measures: IGF1, IGFBPs, hsCRP, and adipokines were the main outcome measures of this analysis. Statistical Analysis: Repeated measures ANOVA and mediation analysis were conducted. Results: Body weight significantly decreased with TRE (−3.6 ± 0.3%), contrasting with controls (+0.2 ± 0.5%, p &lt; 0.001). Significant effects of TRE over time were observed on plasma IGFBP2, insulin, HOMA-IR, and 8-isoprostane levels, without affecting other biomarkers. In the sub-analysis, IGFBP2 increased while leptin and 8-isoprostane decreased significantly only in the “higher weight loss” subgroup. Changes in insulin and HOMA-IR were related to TRE adherence. Conclusions: Eight-week daily 4 to 6 h TRE did not affect IGF1, IGFBP1, or IGFBP3 levels but improved insulin, HOMA-IR, and 8-isoprostane. IGFBP2 increased and leptin decreased when weight loss exceeded 3.5% of baseline.

Systemic Metabolic and Volumetric Assessment via Whole-Body [18F]FDG-PET/CT: Pancreas Size Predicts Cachexia in Head and Neck Squamous Cell Carcinoma.

Background/Objectives: Cancer-associated cachexia in head and neck squamous cell carcinoma (HNSCC) is challenging to diagnose due to its complex pathophysiology. This study aimed to identify metabolic biomarkers linked to cachexia and survival in HNSCC patients using [18F]FDG-PET/CT imaging and machine learning (ML) techniques. Methods: We retrospectively analyzed 253 HNSCC patients from Vienna General Hospital and the MD Anderson Cancer Center. Automated organ segmentation was employed to quantify metabolic and volumetric data from [18F]FDG-PET/CT scans across 29 tissues and organs. Patients were categorized into low weight loss (LoWL; grades 0-2) and high weight loss (HiWL; grades 3-4) groups, according to the weight loss grading system (WLGS). Machine learning models, combined with Cox regression, were used to identify survival predictors. Shapley additive explanation (SHAP) analysis was conducted to determine the significance of individual features. Results: The HiWL group exhibited increased glucose metabolism in skeletal muscle and adipose tissue (p = 0.01), while the LoWL group showed higher lung metabolism. The one-year survival rate was 84.1% in the LoWL group compared to 69.2% in the HiWL group (p < 0.01). Pancreatic volume emerged as a key biomarker associated with cachexia, with the ML model achieving an AUC of 0.79 (95% CI: 0.77-0.80) and an accuracy of 0.82 (95% CI: 0.81-0.83). Multivariate Cox regression confirmed pancreatic volume as an independent prognostic factor (HR: 0.66, 95% CI: 0.46-0.95; p < 0.05). Conclusions: The integration of metabolic and volumetric data provided a strong predictive model, highlighting pancreatic volume as a key imaging biomarker in the metabolic assessment of cachexia in HNSCC. This finding enhances our understanding and may improve prognostic evaluations and therapeutic strategies.

Lactation affects postweaning metabolic profiles, but not follicle size in multiparous sows

Young sows mobilise body reserves to support milk production during lactation, resulting in a negative energy balance (NEB). This NEB affects the development of follicles and oocytes that give rise to the next litter. Decreased IGF1 levels due to a NEB are thought to play a role in this process. As this has hardly been studied in multiparous sows, the current study focused on relations between lactation BW loss (%), metabolic hormones, and follicle development in multiparous sows at Day 0 and Day 4 after weaning. A total of 31 sows of parity 4.7 ± 2.5 were killed at either Day 0 or Day 4 after weaning. Average BW loss during lactation was 3.3 ± 4.5%, while average backfat loss was 4.1 ± 0.3 mm. The metabolic profile confirmed the metabolic impact of lactation as both non-esterified fatty acid (NEFA), and creatinine levels were higher at Day 0 than that at Day 4. Conversely, serum levels of IGF1 and growth differentiation factor 15 levels were lower on Day 0 than on Day 4. A higher BW loss (%) was related to higher NEFA levels on Day 0, but not on Day 4. IGF1 concentrations in serum and follicle fluid were similar at Day 0 and Day 4 and were not related to follicle size on these days. In conclusion, although lactation affected postweaning metabolic profiles in these multiparous sows, follicle size was not related to these profiles, probably due to the relatively mild BW loss of these sows. IGF1 concentrations were less affected by lactation and did not seem to limit follicle development, as it does in sows experiencing high weight loss.

Clinical Impact of Weight Loss During Hospitalization on Prognosis After Pancreatic Surgery.

Purpose This study aimed to elucidate the relationship between early-stage weight loss (WL) during hospitalization after pancreatic surgery and prognosis and investigate risk factors affecting WL. Methods We included 68 patients diagnosed with pancreatic ductal adenocarcinoma (PDAC) who underwent radical surgery. The %WL value was calculated based on the percentage of body weight at discharge compared with the body weight at admission. High WL was defined as %WL >10%. We initially evaluated the association between %WL and postoperative survival using the Kaplan-Meier method. Subsequently, we analyzed the factors affecting %WL using a logistic regression model. Results In terms of overall survival (OS), the high %WL group exhibited a significantly worse prognosis than the low %WL group (p=0.043). Univariate analysis revealed a hazard ratio of 2.244 (95% confidence interval (CI), 1.006-5.006; p=0.048) for high %WL in relation to overall survival. Multivariate analysis identified an operative time >450 min (odds ratio, 17.8; 95% confidence interval, 1.01-312.42; p=0.049) and postoperative complications (odds ratio, 12.1; 95% confidence interval, 2.01-72.79; p<0.01) as independent risk factors for high %WL. Conclusion Preventing high %WL by streamlining surgical procedures, minimizing postoperative complications, and implementing medical nutritional therapy (MNT) is imperative to improve the prognosis of patients with PDAC.

Gelatin-Sodium Alginate Hydrogels Cross-Linked by Squaric Acid and Dialdehyde Starch as a Potential Bio-Ink.

Hydrogels as biomaterials possess appropriate physicochemical and mechanical properties that enable the formation of a three-dimensional, stable structure used in tissue engineering and 3D printing. The integrity of the hydrogel composition is due to the presence of covalent or noncovalent cross-linking bonds. Using various cross-linking methods and agents is crucial for adjusting the properties of the hydrogel to specific biomedical applications, e.g., for direct bioprinting. The research subject was mixtures of gel-forming polymers: sodium alginate and gelatin. The polymers were cross-linked ionically with the addition of CaCl2 solutions of various concentrations (10%, 5%, 2.5%, and 1%) and covalently using squaric acid (SQ) and dialdehyde starch (DAS). Initially, the polymer mixture's composition and the hydrogel cross-linking procedure were determined. The obtained materials were characterized by mechanical property tests, swelling degree, FTIR, SEM, thermal analysis, and biological research. It was found that the tensile strength of hydrogels cross-linked with 1% and 2.5% CaCl2 solutions was higher than after using a 10% solution (130 kPa and 80 kPa, respectively), and at the same time, the elongation at break increased (to 75%), and the stiffness decreased (Young Modulus is 169 kPa and 104 kPa, respectively). Moreover, lowering the concentration of the CaCl2 solution from 10% to 1% reduced the final material's toxicity. The hydrogels cross-linked with 1% CaCl2 showed lower degradation temperatures and higher weight losses than those cross-linked with 2.5% CaCl2 and therefore were less thermally stable. Additional cross-linking using SQ and DAS had only a minor effect on the strength of the hydrogels, but especially the use of 1% DAS increased the material's elasticity. All tested hydrogels possess a 3D porous structure, with pores of irregular shape and heterogenic size, and their swelling degree initially increased sharply to the value of approx. 1000% during the first 6 h, and finally, it stabilized at a level of 1200-1600% after 24 h. The viscosity of 6% gelatin and 2% alginate solutions with and without cross-linking agents was similar, and they were only slightly shear-thinning. It was concluded that a mixture containing 2% sodium alginate and 6% gelatin presented optimal properties after gel formation and lowering the concentration of the CaCl2 solution to 1% improved the hydrogel's biocompatibility and positively influenced the cross-linking efficiency. Moreover, chemical cross-linking by DAS or SQ additionally improved the final hydrogel's properties and the mixture's printability. In conclusion, among the tested systems, the cross-linking of 6% gelatin-2% alginate mixtures by 1% DAS addition and 1% CaCl2 solution is optimal for tissue engineering applications and potentially suitable for 3D printing.

BURN-OP: A screening tool for identifying a symptomatically distinct cluster of burn patients with the greatest healthcare needs at discharge

ObjectiveTo identify burn patients needing intensive rehabilitation based on discharge symptoms. MethodsWe conducted a retrospective analysis of 1049 adult burn patients recruited to the Burn Injury Model System National Database. Using unsupervised hierarchical clustering, we identified three distinct patient clusters based on discharge symptoms and compared their clinical and demographic profiles, long-term rehabilitative needs, and self-reported quality of life. We also developed a weighted BUrn Rehabilitative Needs - OutPatient (BURN-OP) to prospectively identify patients with highest rehabilitative needs. ResultsThree burn patient clusters were identified: Cluster 1 with low, Cluster 2 with moderate, and Cluster 3 with high symptom burdens. Cluster 3, comprising 6 % of discharged patients, had notably longer hospital stays, older age at burn, larger total body surface area (TBSA), increased days on ventilator, a higher number of surgical procedures, concomitant inhalation injury, and higher weight loss from admission to discharge. Cluster 3 patients preferentially utilized a wide spectrum of rehabilitative services (including physiotherapy, occupational therapy, speech-language pathology, social work, psychologic services, vocational services) extending up to 2 years post-discharge. Their self-reported health outcomes were worse, with greater limitations in work/activity and elevated pain interference persisting 5-years post-discharge. BURN-OP demonstrated high specificity (98.99 %) and accuracy (96.19 %, ROC AUC: 0.93) in identifying Cluster 3 patients at discharge. ConclusionsWe identify distinct burn patient clusters based on discharge symptoms, with Cluster 3 exhibiting the highest post-discharge healthcare needs. BURN-OP (https://burn-op.streamlit.app/) identifies high-risk patients, offering a tool for prioritizing interventions and designing trials that mitigate risk of Cluster 3 membership.

The Effect of Putrescine and Modified Atmosphere Packaging (MAP) Treatments on Fruit Quality Characteristics of Strawberry (Kabarla cultivar) During Cold Storage

Strawberry is a fruit species that must be harvested at full ripening and at the same time has an extremely short shelf life and deteriorates rapidly. Therefore, it is important to extend the shelf life after harvest. In this study, putrescine and modified atmosphere packaging (MAP) were applied during cold storage in order to maintain the quality and extend the shelf life of strawberry fruit. The commercial ripening fruit were treated with 1 mM putrescine and stored in MAP for 20 days. The quality characteristics such as weight loss, soluble solids content, titratable acidity, fruit color, organic acid and phenolic content were measured and analyzed on days 4, 8, 12, 16 and 20 of storage. At the end of 20 days of the cold storage, the highest weight loss was in control treatment (%). The decrease in soluble solids content (SSC) and titratable acidity (TA) values during cold storage was slowed down by MAP and putrescine treatments. Organic acids and phenolic compounds were significantly affected by storage time and MAP and putrescine treatments. After 20 days of the cold storage, citric acid (748.91 mg 100 g -1) and malic acid (258.34 mg 100 g-1), which were determined as basic organic acids, were highest in putrescine treatment. Shikimic acid (0.77 mg 100 g-1) and isocitric acid (112.58 mg 100 g-1) as phenolic compounds were highest in MAP and MAP+ putrescine treatments, respectively. These results releaved that the application of putrescine and modified atmosphere packaging (MAP) during cold storage significantly extends the market life of strawberries by preserving their quality attributes.

Insights into the biocorrosion of Q235A steel influenced by the electron transfer process between iron and methanogenic microbiota

Anaerobic microbiologically influenced corrosion (MIC) of Fe (0) metals causes great harm to the environment and economy, which depends on the key electron transfer process between anaerobic microorganisms and Fe (0) metals. However, the key electron transfer process in microbiota dominating MIC remains unclear, especially for methanogenic microbiota wildly distributed in the environment. Herein, three different methanogenic microbiota (Methanothrix, Methanospirillum, and Methanobacterium) were acclimated to systematically investigate electron transfer pathways on corroding Q235A steel coupons. Results indicated that microbiota dominated by Methanothrix, Methanospirillum, or Methanobacterium accelerated the steel corrosion mainly through direct electron transfer (DET) pathway, H2 mediated electron transfer (HMET) pathway, and combined DET and HMET pathways, respectively. Compared with Methanospirillum dominant microbiota, Methanothrix or Methanobacterium dominant microbiota caused more methane production, higher weight loss, corrosion pits with larger areas, higher corrosion depth, and smaller corrosion pits density. Such results reflected that the DET process between microbiota and Fe (0) metals decided the biocorrosion degree and behavior of Fe (0) metals. This study insightfully elucidates the mechanisms of methanogenic microbiota on corroding steels, in turn providing new insights for anti-corrosion motives.

Deep Eutectic Solvent Supported Polymer-Based High Performance Anion Exchange Membrane for Alkaline Fuel Cells

Alkaline anion exchange membrane fuel cells (AEMFC) have gained interest due to their potential as electrochemically energy conversion devices and a competitive alternative to the more extensively studied commercialized proton exchange membrane fuel cells (PEMFCs). Nevertheless, their development impedes the limited ion conductivity, chemical and mechanical stability in an alkaline medium of anion exchange membranes (AEMs). The ionic conductivity of AEM is lower than that of a proton exchange membrane (PEM) because the mobility of hydroxide ions is inherently lower than that of protons [1]. Deep eutectic solvents (DESs) as green solvents can overcome this issue.The main idea of this research is to fabricate a deep eutectic solvent-supported polymer-based AEM for alkaline fuel cell application by electrospinning technique. Poly(vinyl alcohol) (PVA) is one of the potential polymers for the development of AEM due to its water solubility, biodegradability, high fiber forming ability, non-toxicity, and high chemical and thermal stability [2]. This work aims to achieve high ionic conductivity, chemical and mechanical stability by two methods: swelling polyvinyl alcohol (PVA)-based nanofibers into DES and encapsulating DES inside the PVA-nanofibers together with optimizing fabrication methods.In this study, polymer electrolytes as potential AEMs were first prepared using the swelling method, where electrospun PVA nanofibers were fabricated via the electrospinning technique, followed by swelling in a series of DESs. To prepare the DES solutions, choline chloride (ChCl) and ethylene glycol (EG) were mixed at different molar ratios. The cross-linking of pure PVA fibers with glutaraldehyde in ethanol (see Figure 1B) and DES uptake and the presence of voids as channels for ion conduction (see Figure 1C) were successfully confirmed with a scanning electron microscopy (SEM, Crossbeam500, Zeiss). The ionic conductivity of swelled in DES PVA-based membranes were evaluated by electrochemical impedance spectroscopy (Metrohm Autolab) at room temperature and was equal to 0.336 mS/cm. The presence of DES in the membrane was confirmed with FTIR spectroscopy (FT-IR spectrometer, Nicolet iS10): a slight C-N+ peak at 953 cm-1 from ChCl has proven interaction between PVA and DES with FTIR spectroscopy, meaning that DES is present in the fiber. In addition, the nitrogen content in the obtained membrane was determined by CHNS elemental analysis (Elemental Vario micro cube) as 3.32 wt.%.In order to overcome high weight loss in the swelling method, the encapsulation method was suggested as an alternative option, which is based on the encapsulation of DES into the PVA solution by mixing them, varying the amount of DES added, and then preparing fibers using electrospinning. Observing the morphology of DES-encapsulated PVA nanofibers with a scanning electron microscope (SEM, Crossbeam500, Zeiss), as the content of DES in the solution increased, there was an observed rise in the average diameter of the nanofibers (see Figure 1D). Encapsulation of DES in PVA nanofibers was primarily confirmed by transmission electron microscope (TEM, JEM -1400 Plus, JEOL): PVA appears lighter due to its decreased density, proving that DES is present inside the fibers. Also, the same tendency was observed with the results of FTIR spectroscopy (FT-IR spectrometer, Nicolet iS10) as for the swelling method, meaning that DES is present in the fiber. According to CHNS elemental analysis (Elemental Vario micro cube), nitrogen content was lower than for the swelling method - 0.70 wt.%. The ionic conductivity was evaluated as 0.364 mS/cm by electrochemical impedance spectroscopy (Metrohm Autolab) at room temperature, which was almost the same as for the swelling method.As a result, very flexible and visually transparent electrospun DES-supported PVA-based AEMs were obtained via the swelling and encapsulation method.

Synergistic effects of chitosan and gamma irradiation on enhanced fungal growth inhibition and biodegradability of natural rubber latex film

Developing novel formulations and processes to improve the fungal growth inhibition and biodegradability of NR products has become a major challenge for the scientific community, given the health risks associated with fungi in natural rubber (NR) products and the environmental concerns regarding NR waste. Consequently, this study comprehensively investigated the synergistic effects of chitosan and gamma irradiation on enhancing fungal growth inhibition and biodegradability in natural rubber latex (NRL) films. The research involved incorporating varying chitosan contents (0, 3, 6, or 9 phr) into NRL composites and exposing them to different gamma doses (0, 5, 10, or 15 kGy). The results showed that increasing the chitosan content and the gamma dose improved the ability of the NRL samples to inhibit fungal growth on their surfaces. This was evidenced by the absence of fungal colonies after 7 days of incubation on potato dextrose agar (PDA) plates for NRL samples irradiated at 5–15 kGy with 9 phr of chitosan. This determination was based on isolating fungi from the film surfaces, followed by serial dilution and a viable plate count. The biodegradability tests also revealed that the NRL films irradiated at 15 kGy with 9 phr of chitosan had the highest weight loss, reaching as high as 10.42 ± 0.62 % after soil burial for 8 weeks. However, the results indicated that gamma irradiation on the pristine NRL and chitosan/NRL films did not substantially alter the thermal stabilities, density, morphology, and functional groups of the samples. Lastly, by comparing the tensile properties of all the NRL films to the ASTM D3578-01a standard for examination gloves, the optimum conditions for the NRL films were 5 kGy of gamma irradiation with 9 phr of chitosan. This combination resulted in gloves with sufficient tensile strength and complete fungal growth inhibition.

A rescued virus from the infectious clone of a PRRSV NADC34-like strain exhibits high pathogenicity for nursery pigs1

NADC34-like porcine reproductive and respiratory syndrome virus (PRRSV) has been circulating in China for several years and became the dominant field strain in some provinces. Current commercial vaccines could not provide complete cross-protection to NADC34-like PRRSV infection, which led to huge economic losses on pig farms. Co-infections of NADC34-like PRRSV with some other PRRSV strains are commonly found in many clinical cases, and successful isolation of NADC34-like PRRSV strain from the clinical samples has been a challenge to study its biological characters and perform animal experiments to evaluate its pathogenicity. In this study, we constructed a NADC34-like PRRSV infectious clone derived from the isolated JS2021NADC34 PRRSV strain using the reverse genetics technique and investigated its virulence and pathogenicity for nursery pigs. The rescued (rNADC34) strain could proliferate well in porcine alveolar macrophages (PAMs), and the viral copy number and titers were comparable to parental strain. For pathogenicity, the rNADC34 strain-infected pigs showed high body temperature and body weight loss. The histopathological results presented interstitial pneumonia and severe hemorrhage, infiltration of neutrophils and lymphocyte in lungs, lymph nodes, and tonsils. The viral proteins were also detectable in rNADC34 strain-infected pigs using immunohistochemistry staining. Moreover, the trends of PRRSV-specific antibody and viremia in PRRSV rNADC34-infected pigs were similar with the parental strain-infected pigs. These data indicated that rNADC34 strain manifested strong virulence and high pathogenicity for nursery pigs.

Bioefficacy of Mucana pruriens extracts against Rice weevil, Sitophilus oryzae (Coleoptera: Curculionidae)

In the agricultural sector, the rice weevil, Sitophilous oryzae L. is one of the most damaging pests, causing significant economic losses worldwide. It is an internal feeder of grains. The female rice weevil causes damage to the grain by creating a hole in it and laying her eggs inside. The main purpose of our study was to investigate the biological effect of an aqueous extract of Mucana prurienson rice weevil under laboratory conditions. To assess the biological activities, data like number of the days to adult emergence, total adult emergence, percent infestation, weight loss, adult longevity, and adult sex ratio were recorded. The findings showed that, in the case of a 100 mg/ml plant extract, the maximum number of days needed for the adult emergence of rice was 66 and 72 days for wheat weevil, and the minimum number of days required was 20 and 25 in case control of both rice and wheat grains. When rice grains were treated with 0 mg/ml aqueous extracts, the maximum number of adult emergences observed was 72 on rice grains, while 66.00 occurred on wheat grains. The highest percentage of infestation (40.00%) was found in rice grains, while the highest percentage (39.78%) was found in wheat grains treated with 0 mg/ml aqueous extracts. The lowest weight loss (7.99%) was observed in rice grains and the highest weight loss (16.66%) in wheat grains treated with 100 mg/ml extracts; on the other hand, the lowest weight loss (13.33%) was observed in rice grains and the highest in wheat grains treated with 0 mg/ml aqueous extracts. When weevils were raised on untreated rice and wheat grains, the longest recorded adult lifespan was achieved overall. For rice weevil control that is safer, plant aqueous extracts with concentrations of 100 mg/ml and 75 mg/ml ought to be utilized. The present studies were carried out to examine the environmentally friendly aqueous extracts of Mucana pruriens and their pesticidal efficacy in controlling rice weevil. The study anticipates that Mucana pruriens extracts will exhibit significant insecticidal properties, potentially providing a natural alternative to synthetic insecticides. This study contributes to sustainable pest management strategies for stored grains.

The role of incretin receptor agonists in the treatment of obesity.

Obesity and its associated metabolic conditions have become a significant global health problem in recent years, with many people living with obesity fulfilling criteria for pharmacological treatment. The development of the glucagon-like peptide-1 receptor agonists for chronic weight management has triggered new interest in the incretins and other hormones as targets for obesity, and investigations into dual and triple co-agonists. The objective of this narrative review was to summarize the available data on approved and emerging incretin-based agents for the treatment of obesity. In clinical trials of currently available agents in people with overweight or obesity, weight loss of between 6% and 21% of baseline body weight has been observed, with between 23% and 94% of participants achieving 10% or higher weight loss, depending on the study and the agent used. Favourable outcomes have also been seen with regard to cardiovascular risk and outcomes, diabetes prevention, metabolic dysfunction-associated steatotic liver disease/steatohepatitis and prevention of weight regain after metabolic surgery. Limitations associated with these agents include high costs, the potential for weight regain once treatment is stopped, the potential loss of lean body mass and gastrointestinal adverse events; potential issues with respect to gallbladder and biliary diseases require further investigation. Many dual and triple co-agonists are still in development, and more data are needed to assess the efficacy, safety and tolerability of these emerging therapies versus the established incretin-based therapies; however, data are promising, and further results are eagerly awaited.

Evaluation of Gel Coating Performance in Extending the Shelf Life of Egg: The Role of Surface Area and Initial Weight.

This work investigated the impact of chicken egg size, including surface area and initial weight, on the effectiveness of cassava starch-based gel coating during storage at room temperature. The quality of a total of 540 fresh eggs in four different sizes (S, M, L and XL) was evaluated over a 4-week storage period at 25 ± 1 °C (60-65% RH). In this research, images from a scanning electron microscope revealed that the coatings maintained their integrity across all egg sizes, effectively covering pores and cracks throughout storage. The application of gel coating reduced weight loss and preserved the Haugh unit and yolk index, extending freshness by 1-2 weeks compared with uncoated eggs at 25 °C. The results indicated that the performance of the coating varied with egg size. Statistical analysis revealed that the surface area and initial weight of the egg significantly impacted the effectiveness of the coating in preserving quality (p < 0.001). Eggs with larger surface areas exhibited a reduced protective effect of the coating, resulting in higher weight loss and lower retention of Haugh unit and yolk index compared with the coated eggs with smaller surface areas. The coating application was more effective in preserving the Haugh unit of eggs with higher initial weights. Overall, the surface area and the initial weight of the egg should be considered as key factors to ensure optimal coating performance.

Preparation and thermal insulation properties of lightweight high-strength polyimide aerogels containing benzoazole structures

Polyimide (PI) aerogels, serving as thermal insulation materials in extreme environments, stand out for their exceptional high temperature stability and superb thermal insulation properties, rendering them ideal for aerospace, transportation, and specialized equipment industries. However, conventionally synthesized PI aerogels suffer from significant drawbacks in mechanical properties and thermal stability, limiting their practical applications. To overcome this challenge, we successfully synthesized polyimide aerogels using biphenyl-3,3,4,4′-tetracarboxylic dianhydride (BPDA), 5-amino-2-(4-aminophenyl)benzimidazole (PABZ), and 5-amino-2-(4-aminophenyl)benzoxazole (APBO) followed by supercritical carbon dioxide drying. These synthesized PIs exhibit remarkable thermal stability, with high thermal weight loss temperatures (Td5 %=595–611℃) and high glass transition temperatures. Additionally, these novel PI aerogels demonstrate exceptional thermal insulation properties, high specific surface area, and extremely small pore size. Furthermore, boasting a low dielectric constant (ε=1.72), these newly developed PI aerogels offer along with excellent mechanical properties, holding substantial promise for applications in the forthcoming generation of advanced aerospace and specialized equipment materials.