High Stability Research Articles

Atomic-Level Observation of Potential-Dependent Variations at the Surface of an Oxide Catalyst during Oxygen Evolution Reaction.

Understanding the intricate details of the surface atomic structure and composition of catalysts during the oxygen evolution reaction (OER) is crucial for developing catalysts with high stability in water electrolyzers. While many notable studies highlight surface amorphization and reconstruction, systematic analytical tracing of the catalyst surface as a function of overpotential remains elusive. Heteroepitaxial (001) films of chemically stable and lattice-oxygen-inactive LaCoO3 are thus utilized as a model catalyst to demonstrate a series of atomic-resolution observations of the film surface at different anodic potentials. The first key finding is that atoms at the surface are fairly dynamic even at lower overpotentials. Angstrom-scale atomic displacements within the perovskite framework are identified below a certain potential level. Another noteworthy feature is that amorphization (or paracrystallization) with no long-range order is finally induced at higher overpotentials. In particular, surface analyses consistently support that the oxidation of lattice oxygen is coupled with amorphous phase formation at the high potentials. Theoretical calculations also reveal an upward shift of oxygen 2p states toward the Fermi level, indicating enhanced lattice oxygen activation when atom displacement occurs more extensively. This study emphasizes that the degradation behavior of OER catalysts can distinctively vary depending on the overpotential level.

Efficient H2O2 Synthesis through a Two-Electron Oxygen Reduction Reaction by Electrocatalysts.

The two-electron oxygen reduction reaction (2e-ORR) for the sustainable synthesis of hydrogen peroxide (H2O2) has demonstrated considerable potential for local production of this environmentally friendly chemical oxidant on small, medium, and large scales. This method offers a promising alternative to the energy-intensive anthraquinone approach, placing a primary emphasis on the development of efficient electrocatalysts. Improving the efficiency of electrocatalysts and uncovering their catalytic mechanisms are essential steps in achieving high 2e-ORR activity, selectivity, and stability. This comprehensive review summarizes recent advancements in electrocatalysts for in-situ H2O2 production, providing a detailed overview of the field. In particular, the review delves into the design, fabrication, and investigation of catalytic active sites contributing to H2O2 selectivity. Additionally, it highlights a range of electrocatalysts including pure metals and alloys, transition metal compounds, single-atom catalysts, and carbon-based catalysts for the 2e-ORR pathway. Finally, the review addresses significant challenges and opportunities for efficient H2O2 electrosynthesis, as well as potential future research directions.

Effects of Fly Ash and Graphene Oxide in Cement Mortar Considering the Local Recycled Material Context

Construction materials are at the forefront of global economic development as they provide the foundation for the infrastructure of other industries, with cementitious materials being predominantly used in construction projects. To promote sustainable development, alternative materials are added to cement mortar to increase durability and reduce emissions. In this regard, graphene oxide (GO) and fly ash (FA) are two alternative materials commonly used in cement mortar, which are readily available or are just the waste from other local material production. With different ratios, the amount of GO and FA can affect the properties of cement mortar positively or negatively. This study aims to determine the effects of GO and FA on cement mortar mixtures under material conditions. Research results show that 10 wt% FA and 0.036 wt% GO will give cement mortar the best physical and mechanical properties while ensuring other necessary properties, such as workability. When increasing FA to 30 wt% or GO to 0.05 wt%, the strength of the mortar mixture tends to decrease. Another issue is that the specific surface area of graphene is very high, which poses a significant challenge when uniform dispersion in the cement paste mixture is required. Polycarboxylate combined with a specific mixing sequence has demonstrated good dispersibility and high stability. Through this research, it is demonstrated that the addition of GO and FA has the potential for sustainable development of the construction industry by considering the contexts of the local recycled cementitious replacement materials.

Simultaneous production of syngas and carbon nanotubes from CO2/CH4 mixture over high-performance NiMo/MgO catalyst

Direct conversion of biogas via the integrative process of dry reforming of methane (DRM) and catalytic methane decomposition (CDM) has received a great attention as a promising green catalytic process for simultaneous production of syngas and carbon nanotubes (CNTs). In this work, the effects of reaction temperature of 700–1100 °C and CH4/CO2 ratio of biogas were investigated over NiMo/MgO catalyst in a fixed bed reactor under industrial feed condition of pure biogas. The reaction at 700 °C showed a rapid catalyst deactivation within 3 h due to the formation of amorphous carbon on catalyst surface. At higher temperature of 800–900 °C, the catalyst can perform the excellent performance for producing syngas and carbon nanotubes. Interestingly, the smallest diameter and the highest graphitization of CNTs was obtained at high temperature of 1000 °C, while elevating temperature to 1100 °C leads to agglomeration of Ni particles, resulting in a larger size of CNTs. The reaction temperature exhibits optimum at 800 °C, providing the highest CNTs yield with high graphitization, high syngas purity up to 90.04% with H2/CO ratio of 1.1, and high biogas conversion (XCH4 = 86.44%, XCO2 = 95.62%) with stable performance over 3 h. The typical composition biogas (CH4/CO2 = 1.5) is favorable for the integration process, while the CO2 rich biogas caused a larger grain size of catalyst and a formation of molybdenum oxide nanorods (MoO3). The long-term stability of NiMo/MgO catalyst at 800 °C showed a stable trend (> 20 h). The experimental findings confirm that NiMo/MgO can perform the excellent activity and high stability at the optimum condition, allowing the process to be more promising for practical applications.

Electrochemical CO2 Reduction on Cu-Based Monatomic Alloys: A DFT Study.

In recent years, single-atom alloy catalysts (SAAs) have received much attention due to the combination of structural features of both single-atom and alloy catalysts, as well as their efficient catalytic activity, high selectivity, and high stability in various chemical reactions. In this work, we designed a series of Cu-based SAAs by doping isolated 3d transition metal (TM1) atoms on the surface of Cu(111) (TM1 = Fe, Co, Ru, Rh, Os and Ir), in which Ir1/Cu(111) SAAs are considered to be the most stable among 3d-series SAAs due to their optimal binding energy (Eb). The density of states of SAAs have been systematically investigated to further discuss structural properties. Based on density functional theory calculations, the activity and selectivity of Ir1/Cu(111) SAAs are investigated for electrocatalytic CO2 reduction reaction (CO2RR). The initial hydrogenation of CO2 on Ir1/Cu(111) SAAs can form *CO intermediates, which will be further to CH4 production by the pathway of *CO → *CHO → *CHOH → *CH2OH → *CH2 → *CH3 → CH4. This study provides theoretical insights for the rational design of selective Cu-based monatomic alloy catalysts.

Crystal-Rigidifying Strategy in Hybrid Manganese Halide to Achieve Narrow Green Emission and High Structural Stability.

Although organic-inorganic hybrid Mn2+ halides have advanced significantly, achieving high stability and narrow-band emission remains enormously challenging owing to the weak ionic nature and soft crystal lattice of the halide structure. To address these issues, we proposed a cationic engineering strategy of long-range cation π···π stacking and C-H···π interactions to simultaneously improve the crystal structural stability and rigidity. Herein, two organic zero-dimensional (0D) manganese halide hybrids of (BACQ)2MnX4 [BACQ = 4-(butylamino)-7-chloroquinolin-1-ium; X = Cl and Br] were synthesized. (BACQ)2MnX4 display strong green-light emissions with the narrowest full width at half-maximum (fwhm) of 39 nm, which is significantly smaller than those of commercial green phosphor β-SiAlON:Eu2+ and most of reported manganese halides. Detailed Hirshfeld surface analyses demonstrate the rigid environment around the [MnX4]2- units originating from the interactions between [BACQ]+. The rigid crystal structure weakens the electron-phonon coupling and renders narrow fwhm of these manganese halides, which is further confirmed by temperature-dependent emission spectra. Remarkably, (BACQ)2MnX4 realizes outstanding structural and luminescence stabilities in various extreme environments. Benefiting from the excellent performance, these Mn2+ halides are used to assemble light-emitting diodes with a wide color gamut of 105% of the National Television System Committee 1931 standard, showcasing the advanced applications in liquid-crystal-display backlighting.

Robust {Pb10}-Cluster-Based Metal-Organic Framework for Capturing and Converting CO2 into Cyclic Carbonates under Mild Conditions.

Developing a highly active catalyst that can efficiently capture and convert carbon dioxide (CO2) into high-value-added energy materials remains a severe challenge, which inspires us to explore effective metal-organic frameworks (MOFs) with high chemical stability and high-density active sites. Herein, we report a robust 3D lead(II)-organic framework of {(Me2NH2)2[Pb5(PTTPA)2(H2O)3]·2DMF·3H2O}n (NUC-111) with unreported [Pb10(COO)22(H2O)6] clusters (abbreviated as {Pb10}) as nodes (H6PTTPA = 4,4',4″-(pyridine-2,4,6-triyl)triisophthalic acid). After thermal activation, NUC-111a is functionalized by the multifarious symbiotic acid-base active sites of open Pb2+ sites and uncoordinated pyridine groups on the inner surface of the void volume. Gas adsorption tests confirm that NUC-111a displays a higher separation performance for mixed gases of f CO2 and CH4 with the selectivity of CO2/CH4 at 273 K and 101 kPa being 31 (1:99, v/v), 23 (15:85, v/v), and 8 (50:50, v/v), respectively. When the temperature rises to 298 K, the selectivity of CO2/CH4 at 101 kPa is 26 (1:99, v/v), 22 (15:85, v/v), and 11 (50:50, v/v). Moreover, activated NUC-111a exhibited excellent catalytic performance, stability, and recyclability for the cycloaddition of CO2 with epoxides under mild conditions. Hence, this work provides valuable insight into designing MOFs with multifunctionality for CO2 capture, separation, and conversion.

Sustainable Light‐Assisted 3D Printing of Bio‐Based Microwave‐Functionalized Gallic Acid

AbstractThe development of 3D printing technologies and the requirement for more sustainable 3D printing materials is constantly growing. However, ensuring both sustainability and performance of the new materials is crucial to replace current fossil‐based polymers. Here, a bio‐based UV‐curable resin is produced in high yield from gallic acid (GA), a natural polyphenolic compound, by means of rapid and efficient microwave‐assisted methacrylation (5 min heating time and 10 min at 130 °C). The successful microwave‐assisted methacrylation with a high degree of substitution is confirmed by Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance spectroscopy. The radical UV‐photopolymerization of the methacrylated gallic acid (MGA) is further investigated by real‐time FTIR and differential scanning photo calorimetry (photo‐DSC) analyses, clearly demonstrating the high photo‐reactivity of MGA. Moreover, the %gel assessment demonstrates the formation of highly insoluble fractions after the UV‐curing, with 98% gel content. The photo‐rheology and rheology support the suitability of MGA for light‐assisted 3D printing. Indeed, a honeycomb and a hollow cube are 3D printed by means of the digital light processing 3D printing technique with high accuracy in a small scale. Finally, the cured‐MGA illustrates high Tg and thermal stability.

Synthesis of Chabazite Zeolite via Faujasite Conversion Using 1‐(1‐Methylpropyl)‐4‐aza‐1‐azoniabicyclo[2.2.2]octane Hydroxide as Cost‐Effective Structure‐Directing Agent

Cu‐exchanged chabazite zeolite is the state‐of‐the‐art used on‐board catalyst for NOx selective reduction by ammonium (NH3‐SCR), and the zeolite is currently generated in the presence of N,N,N‐trimethyl‐1‐adamantylammonium hydroxide, serving as organic structure‐directing agent (OSDA). The expensiveness of this OSDA increases the catalyst production cost, while its low degradability brings about environmental concerns in post treatment of waste water. Here, a new type OSDA, 1‐(1‐methylpropyl)‐4‐aza‐1‐azoniabicyclo[2.2.2]octane hydroxide, is proposed to direct Faujasite‐to‐Chabazite inter‐zeolite conversion and generate chabazite with Si/Al ratio up to 7.2. The obtained zeolite possesses high hydrothermal stability for the high crystallinity, siliceous framework and low concentrations of Si(2Si, 2Al) sites. The Cu‐form catalyst exhibits better catalytic performance in standard NH3‐SCR process for the tiny crystallite size (35‐258 nm) and formation of highly dispersed copper sites. The synthesis offers a new type of OSDA to fabricate zeolites and expands the toolkit to regulate their physicochemical properties.

Network pharmacology and molecular dynamics study of the effect of the Astragalus-Coptis drug pair on diabetic kidney disease

BACKGROUND Diabetic kidney disease (DKD) is the primary cause of end-stage renal disease. The Astragalus -Coptis drug pair is frequently employed in the management of DKD. However, the precise molecular mechanism underlying its therapeutic effect remains elusive. AIM To investigate the synergistic effects of multiple active ingredients in the Astragalus-Coptis drug pair on DKD through multiple targets and pathways. METHODS The ingredients of the Astragalus -Coptis drug pair were collected and screened using the TCMSP database and the SwissADME platform. The targets were predicted using the SwissTargetPrediction database, while the DKD differential gene expression analysis was obtained from the Gene Expression Omnibus database. DKD targets were acquired from the GeneCards, Online Mendelian Inheritance in Man database, and DisGeNET databases, with common targets identified through the Venny platform. The protein-protein interaction network and the “disease-active ingredient-target” network of the common targets were constructed utilizing the STRING database and Cytoscape software, followed by the analysis of the interaction relationships and further screening of key targets and core active ingredients. Gene Ontology (GO) function and Kyoto Ency-clopedia of Genes and Genomes (KEGG) pathway enrichments were performed using the DAVID database. The tissue and organ distributions of key targets were evaluated. PyMOL and AutoDock software validate the molecular docking between the core ingredients and key targets. Finally, molecular dynamics (MD) simulations were conducted to simulate the optimal complex formed by interactions between core ingredients and key target proteins. RESULTS A total of 27 active ingredients and 512 potential targets of the Astragalus -Coptis drug pair were identified. There were 273 common targets between DKD and the Astragalus -Coptis drug pair. Through protein-protein interaction network topology analysis, we identified 9 core active ingredients and 10 key targets. GO and KEGG pathway enrichment analyses revealed that Astragalus -Coptis drug pair treatment for DKD involves various biological processes, including protein phosphorylation, negative regulation of apoptosis, inflammatory response, and endoplasmic reticulum unfolded protein response. These pathways are mainly associated with the advanced glycation end products (AGE)-receptor for AGE products signaling pathway in diabetic complications, as well as the Lipid and atherosclerosis. Molecular docking and MD simulations demonstrated high affinity and stability between the core active ingredients and key targets. Notably, the quercetin-AKT serine/threonine kinase 1 (AKT1) and quercetin-tumor necrosis factor (TNF) protein complexes exhibited exceptional stability. CONCLUSION This study demonstrated that DKD treatment with the Astragalus -Coptis drug pair involves multiple ingredients, targets, and signaling pathways. We propose a novel approach for investigating the molecular mechanism underlying the therapeutic effects of the Astragalus -Coptis drug pair on DKD. Furthermore, we suggest that quercetin is the most potent active ingredient and specifically targets AKT1 and TNF, providing a theoretical foundation for further exploration of pharmacologically active ingredients and elucidating their molecular mechanisms in DKD treatment.

Ranitidine degradation in layered double hydroxide activated peroxymonosulfate system: impact of transition metal composition and reaction mechanisms.

Ranitidine, a competitive inhibitor of histamine H2 receptors, has been identified as an emerging micropollutant in water and wastewater, raising concerns about its potential impact on the environment and human health. This study aims to address this issue by developing an effective removal strategy using two types of layered double hydroxide (LDH) catalysts (i.e., CoFeLDH and CoCuLDH). Characterization results show that CoFeLDH catalyst has superior catalytic properties due to its stronger chemical bond compared to CoCuLDH. The degradation experiment shows that 100% degradation of ranitidine could be achieved within 20min using 25mg/L of CoFeLDH and 20mg/L of peroxymonosulfate (PMS). On the other hand, CoCuLDH was less effective, achieving only 70% degradation after 60min at a similar dosage. The degradation rate constant of CoFeLDH was 10 times higher than the rate constant of CoCuLDH at different pH range. Positive zeta potential of CoFeLDH made it superior over CoCuLDH regarding catalytic oxidation of PMS. The catalytic degradation mechanism shows that sulfate radicals played a more dominant role than hydroxyl radicals in the case of LDH catalysts. Also, CoFeLDH demonstrated a stronger radical pathway than CoCuLDH. XPS analysis of CoFeLDH revealed the cation percentages at different phases and proved the claim of being reusable even after 8 cycles. Overall, the findings suggest that CoFeLDH/PMS system proves to be a suitable choice for attaining high degradation efficiency and good stability in the remediation of ranitidine in wastewater.

Important role of Bacillus subtilis as a probiotic and vaccine carrier in animal health maintenance.

Bacillus subtilis is a widespread Gram-positive facultative aerobic bacterium that is recognized as generally safe. It has shown significant application value and great development potential in the animal farming industry. As a probiotic, it is frequently used as a feed growth supplement to effectively replace antibiotics due to its favourable effects on regulating the intestinal flora, improving intestinal immunity, inhibiting harmful microorganisms, and secreting bioactive substances. Consequently, the gut health and disease resistance of farmed animals can be improved. Both vegetative and spore forms of B. subtilis have also been utilized as vaccine carriers for delivering the antigens of infectious pathogens for over a decade. Notably, its spore form is regarded as one of the most prospective for displaying heterologous antigens with high activity and stability. Previously published reviews have predominantly focused on the development and applications of B. subtilis spore surface display techniques. However, this review aims to summarize recent studies highlighting the important role of B. subtilis as a probiotic and vaccine carrier in maintaining animal health. Specifically, we focus on the beneficial effects and underlying mechanisms of B. subtilis in enhancing disease resistance among farmed animals as well as its potential application as mucosal vaccine carriers. It is anticipated that B. subtilis will assume an even more prominent role in promoting animal health with in-depth research on its characteristics and genetic manipulation tools.

Thermal Effects on Domain Wall Stability at Magnetic Stepped Nanowire for Nanodevices Storage

In the future, DW memory will replace conventional storage memories with high storage capacity and fast read/write speeds. The only failure in DW memory arises from DW thermal fluctuations at pinning sites. This work examines, through calculations, the parameters that might help control DW thermal stability at the pinning sites. It is proposed to design a new scheme using a stepped area of a certain depth (d) and length (λ). The study reveals that DW thermal stability is highly dependent on the geometry of the pinning area (d and λ), magnetic properties such as saturation magnetization (Ms) and magnetic anisotropy energy (Ku), and the dimensions of the nanowires. For certain values of d and λ, DWs remain stable at temperatures over 500 K, which is beneficial for memory applications. Higher DW thermal stability is also achieved by decreasing nanowire thickness to less than 10 nm, making DW memories stable below 800 K. Finally, our results help to construct DW memory nanodevices with nanodimensions less than a 40 nm width and less than a 10 nm thickness with high DW thermal stability.

Magnetic yolk-shell structured periodic mesoporous organosilica supported palladium as a powerful and highly recoverable nanocatalyst for the reduction of nitrobenzenes

A novel palladium-loaded yolk-shell structured nanomaterial with magnetite core and phenylene-based periodic mesoporous organosilica (PMO) shell (Fe3O4@YS-Ph-PMO/Pd) nanocatalyst was synthesized for the reduction of nitrobenzenes. The Fe3O4@YS-Ph-PMO/Pd was prepared through cetyltrimethylammonium bromide (CTAB) directed condensation of 1,4-bis(triethoxysilyl)benzene (BTEB) around Fe3O4@silica nanoparticles followed by treatment with palladium acetate. This nanocatalyst was characterized by using Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), low-angle and wide-angle powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) analyses. These analyses showed a magnetic nanomaterial with high chemical and thermal stability for the designed composite. The Fe3O4@YS-Ph-PMO/Pd nanocomposite was employed as a powerful and highly recoverable catalyst in the green reduction of nitroarenes in H2O at room temperature. A variety of nitroarene derivatives were applied as substrate in the presence of 0.9 mol% of Fe3O4@YS-Ph-PMO/Pd catalyst. All nitroarenes were selectively converted to their corresponding amines with high to excellent yields (92–96%) within short reaction times (10–18 min). This catalyst was recovered and reused at least 11 times without significant decrease in efficiency and stability.

Non-destructive Evaluation of Cavitation Erosion Behavior of Alumina-based Ceramic Samples

Numerous industrial parts, devices, and processes are designed to withstand the conditions that lead to cavitation erosion. Metallic, ceramic, and composite materials used for these conditions must achieve specific mechanical characteristics required to resist cavitation erosion. When molten metal or alloy flows and comes into contact with refractory material or coated furnace linings, cavitation erosion can occur. This phenomenon is particularly expected in metallurgy, especially in casting operations. Alumina-based refractories, specifically low cement castable (ALCC), are often used in furnace lining applications due to their superior properties, such as high refractoriness, thermal stability, and mechanical characteristics. Mullite is another refractory material frequently used in foundry lining applications. It can be utilized as a coating in casting processes, such as the Lost Foam process, which is a novel method for producing high-quality, cost-effective castings. These two refractory materials were chosen to study their behavior under cavitation conditions. An ultrasonic vibratory test with a stationary specimen (ASTM G-32) was used for experimental cavitation determination. The results of mass loss and surface morphological parameters of degradation revealed that ALCC samples eroded predominantly at the surface, while the mullite samples exhibited more significant degradation by depth.

High stability of the ferroelectricity against hydrogen gas in (Al,Sc)N thin films

The changes in the crystal structure and ferroelectric properties of (Al0.8Sc0.2)N films sandwiched between Pt and TiN electrodes were investigated by subjecting the films to post-heat-treatment at various temperatures up to 600 °C in both H2 and Ar gases. The remanent polarization underwent slight change, whereas the coercive field strengthened by approximately 9% as a result of the post-heat-treatment up to 600 °C irrespective of the atmosphere and electrode material. This change is much smaller than that reported for ferroelectric (Hf,Zr)O2 films as well as for Pb(Zr,Ti)O3 and SrBi2Ta2O9 films for a wide temperature range from 400 to 600 °C and is almost independent of the Pt and TiN electrodes. The high stability of (Al,Sc)N films with both Pt and TiN electrodes under H2 atmosphere is highly promising to stabilize the properties through the device fabrication process.

High Stability Hypha-Like Core-Shell Nanostructure by In Situ Induced Phase Inversion for Zinc Metal Batteries.

Nanomaterials are widely used in many fields for their unique physical and chemical properties and especially demonstrate irreplaceability in energy storage systems. In this paper, a novel composite of copper sulfide with hypha-like core-shell nano-structure is synthesized by in situ phase inversion method, which serves as high stability negative electrode materials of zinc-ion batteries (ZIBs). The unique structure facilitates efficient electron and ion transport, enhances the kinetics of electrochemical reactions, and effectively suppresses the undesired expansion and decomposition of transition metal compounds. As a result, the half battery exhibits high specific capacity (250.2 mAh g-1 at 0.1 A g-1), reliable rate performance, and cycle stability (98.3 mAh g-1 at 1 A g-1 after 500 cycles). Additionally, when assembled with ZnxMnO2 positive to form a full battery, it demonstrates good cycling capacity at an intermediate current density of 2 A g-1, while maintaining excellent structural stability over 5,000 cycles (61% retention).

Rutile‐Structured Ru0.48Mn0.52O2 Solid Solution for Highly Active and Stable Oxygen Evolution at Large Current Density in Acidic Media

AbstractThe development of active, stable, and cost‐effective electrocatalysts for the oxygen evolution reaction (OER) in acidic media is crucial for proton‐exchange‐membrane water electrolysis. Inspired by theoretical screening on a series of transition metal incorporated RuO2 systems, a low Ru‐content solid solution oxide (Ru0.48Mn0.52O2) achieved is fabricated by a simple two‐step synthesis method through the combination of rutile RuO2 and β‐MnO2. The Ru0.48Mn0.52O2 catalyst exhibits an exceptionally low overpotential of 154 mV at 10 mA cm−2 and maintains a high stability under a high current of 100 mA cm−2 for 50 h in 0.5 m H2SO4 electrolyte. Furthermore, the obtained catalyst exhibits sustained stability at a large current of 0.5 A cm−2 for at least 50 h when loaded onto a Ti felt. The in‐situ characterization results indicate that Ru0.48Mn0.52O2 preferably followed the adsorbate evolution mechanism rather than the lattice oxygen oxidation mechanism during the OER process, contributing to its high activity and stability at large current densities in acidic media.

Light-mediated biosynthesis of size-tuned silver nanoparticles using Saccharomyces cerevisiae extract.

Bio-based production of silver nanoparticles represents a sustainable alternative to commercially applied physicochemical manufacturing approaches and provides qualitatively highly valuable nanomaterials due to their narrow size dispersity, high stability and biocompatibility with broad application potentials. The intrinsic features of nanoparticles depend on size and shape, whereby the controlled synthesis is a challenging necessity. In the present study, the biosynthesis of size-tuned silver nanoparticles based on cell-free extracts of Saccharomyces cerevisiae DSM 1333 was investigated. Single parameter optimization strategies in phases of cultivation, extraction, and synthesis were performed to modify the nanoparticle scale and yield. Visible light was exploited as a tool in nanoparticle production. The influence of white light on the biosynthesis of silver nanoparticles was determined by using novel LED systems with the exposition of varying irradiation intensities and simultaneous performance of control experiments in the dark. Characterization of the resulting nanomaterials by spectrophotometric analysis, dynamic light scattering, scanning electron microscopy, and energy dispersive X-ray spectroscopy, revealed spherical silver nanoparticles with controlled, light-mediated size shifts in markedly increased quantities. Matching of irradiated and non-irradiated reaction mixtures mirrored the enormous functionality of photon input and the high sensitivity of the biosynthesis process. The silver nanoparticle yields increased by more than 90% with irradiation at and the reduction of particle dimensions was achieved with significant shifts of size-specific absorption maxima from 440 to 410nm, corresponding to particle sizes of 130nm and 100nm, respectively. White light emerged as an excellent tool for nano-manufacturing with advantageous effects for modulating unique particle properties.

Improved rate capability and energy density of high-mass hybrid supercapacitor realized through long-term cycling stability testing and selective electrode design

To render supercapacitors (SCs) more practical, they must exhibit high cycling stability of at least ten thousand cycles with commercial-level mass loadings, which differentiates them from batteries. Metal-organic framework (MOF)-based electrode materials are promising for use in energy storage systems owing to their excellent electrochemical performance. In this study, we report the electroactivities of bimetallic MOFs (Co, Ni, and Co–Ni) using a single-step, facile, and cost-effective hydro/solvothermal method. To optimize their performances, we develop a general strategy for analyzing various binder-free MOFs. Additionally, the effects of the reaction time, reaction temperature, solvents, and elements (Ni, Co, and H2BDC) on the surface morphology and electrochemical performance are investigated. Based on an analysis of the electrochemical properties of all the synthesized electrode materials, the optimal electrode delivers an ultrahigh areal capacity of 2621 µAh cm−2 (297.1 mAh g−1) at 7 mA cm−2, with a high-rate capability of 82.5 % even at 40 mA cm−2. The optimized Co–Ni MOF electrode is employed as a positive electrode to fabricate an aqueous hybrid SC (HSC) with an activated carbon-coated nickel foam electrode as a negative electrode. The as-fabricated HSC exhibits excellent electrochemical properties with exceptional cycling stability (120k cycles) and improved rate capability (60 %). Additionally, we identify factors that contribute to improved redox reactions in the Co–Ni MOF-based HSC, such as the role of Co–Ni MOFs in the redox reaction and the influences of other structural parameters on charge storage and transfer processes. Our aim is to further understand the underlying mechanisms of the improved redox reactions and thus obtain new insights into the design and optimization of Co–Ni MOF-based HSCs. Finally, the energy storage properties of the HSC are validated by using it to power different electronic devices. The promising outcomes obtained in this work can serve as a basis for the future practical implementation of high-energy-density HSCs with high mass loadings and charging rates. SynopsisTo render the practicability of hybrid supercapacitor (HSC) with enhanced energy storage properties, we investigate the electroactivities of bimetallic metal-organic frameworks (MOFs) (Co, Ni, and Co–Ni) using a single-step, facile, and cost-effective hydro/solvothermal method. To optimize their performances, a general strategy is developed for analyzing various binder-free MOFs. Additionally, the effects of the reaction time, reaction temperature, solvents, and elements (Ni, Co, and H2BDC) on the surface morphology and electrochemical performance are studied. In addition, we validate the energy storage properties of the HSC by using it to power different electronic devices. The promising outcomes obtained in this study can serve as a basis for the future practical implementation of high-energy-density HSCs with high mass loadings and charging rates.