High Yield Research Articles

Influence of humic preparations on the development of honeysuckle in the forest steppe of Western Siberia

Blue honeysuckle is a winter-hardy and unpretentious crop; in folk medicine, its berries and juice are used for hypertension, anemia, and intestinal disorders. The environmental situation and the general rise in prices of pesticides and mineral fertilizers stimulate the choice of alternative technologies and the use of biological plant protection products, growth stimulants, and bacterial fertilizers. In this regard, our research aimed to study the effect of various humic preparations on the growth and development of green cuttings of blue honeysuckle variety Berel. This variety has a medium ripening period, gives a high yield, is slightly crumbling, and is highly winter-hardy. The research was carried out in the Novosibirsk region on the territory of the Agro Seed Company in 2019 - 2021. The average annual growth and general condition of blue honeysuckle plants of the Berel variety were determined according to generally accepted methods. Data analysis showed that all studied indicators of honeysuckle plants are greatly influenced by the year’s conditions when the difference between years reaches 25 - 30%. In addition, it was found that all the studied drugs positively affect the growth and development of plants and, in particular, the survival rate and overwintering of green honeysuckle cuttings (up to 45%). Thus, the ZhT “Ekozhizn” preparation provided better survival and overwintering of plants. Cytohumate had a better effect on the development of vegetative mass, but in terms of survival and overwintering, it was inferior to using the ZhT “Ecozhizn” preparation.

Novel Disperse Dyes Based on Enaminones: Synthesis, Dyeing Performance on Polyester Fabrics, and Potential Biological Activities

1-(3-aryl)-3-(dimethylamino)prop-2-en-1-one (enaminones) derivatives and the diazonium salt of para-chloroaniline were used to synthesize several novel disperse azo dyes with high yield and the use of an environmentally friendly approach. At 100 and 130 °C, we dyed polyester fabrics using the new synthesized disperse dyes. At various temperatures, the dyed fabrics’ color intensity was assessed. The results we obtained showed that dyeing utilizing a high temperature method at 130 °C was enhanced than dyeing utilizing a low temperature method at 100 °C. Reusing dye baths once or twice was a way to achieve two goals at the same time. The first was obtaining a dyed product at no cost, and the second was a way to treat the wastewater of dyeing bath effluents and reuse it again. Good results were obtained for the fastness characteristics of polyester dyed with disperse dyes. When the disperse dyes were tested against certain types of microbes and cancer cells, they demonstrated good and encouraging findings for the potential to be used as antioxidants and antimicrobial agents.

An Overview of Hydrothermally Synthesized Titanate Nanotubes: The Factors Affecting Preparation and Their Promising Pharmaceutical Applications

Recently, titanate nanotubes (TNTs) have been receiving more attention and becoming an attractive candidate for use in several disciplines. With their promising results and outstanding performance, they bring added value to any field using them, such as green chemistry, engineering, and medicine. Their good biocompatibility, high resistance, and special physicochemical properties also provide a wide spectrum of advantages that could be of crucial importance for investment in different platforms, especially medical and pharmaceutical ones. Hydrothermal treatment is one of the most popular methods for TNT preparation because it is a simple, cost-effective, and environmentally friendly water-based procedure. It is also considered as a strong candidate for large-scale production intended for biomedical application because of its high yield and the special properties of the resulting nanotubes, especially their small diameters, which are more appropriate for drug delivery and long circulation. TNTs’ properties highly differ according to the preparation conditions, which would later affect their subsequent application field. The aim of this review is to discuss the factors that could possibly affect their synthesis and determine the transformations that could happen according to the variation of factors. To fulfil this aim, relevant scientific databases (Web of Science, Scopus, PubMed, etc.) were searched using the keywords titanate nanotubes, hydrothermal treatment, synthesis, temperature, time, alkaline medium, post treatment, acid washing, calcination, pharmaceutical applications, drug delivery, etc. The articles discussing TNTs preparation by hydrothermal synthesis were selected, and papers discussing other preparation methods were excluded; then, the results were evaluated based on a careful reading of the selected articles. This investigation and comprehensive review of different parameters could be the answer to several problems concerning establishing a producible method of TNTs production, and it might also help to optimize their characteristics and then extend their application limits to further domains that are not yet totally revealed, especially the pharmaceutical industry and drug delivery.

Regioselective N1‐methylation of 1H‐tetrazoles with methyl 2,2,2‐trichloroacetimidate

AbstractAn efficient, mild, and regioselective synthesis of substituted 1‐methyl‐1H‐tetrazole using methyl 2,2,2‐trichloroacetimidate is described. The substrate scope of the methodology has been established with wide variety of tetrazoles. N1‐Methylated tetrazoles were synthesized with high yields (85%–97%).

The Role of the Heterogeneous Catalyst to Produce Solketal from Biodiesel Waste: The Key to Achieve Efficiency

The valorization of the large amount of crude glycerol formed from the biodiesel industry is of primordial necessity. One possible direction with high interest to the biorefinery sector is the production of fuel additives such as solketal, through the acetalization of glycerol with acetone. This is a chemical process that conciliates high sustainability and economic interest, since solketal contributes to the fulfillment of a Circular Economy Model through its use in biodiesel blends. The key to guarantee high efficiency and high sustainability for solketal production is the use of recovery and recyclable heterogeneous catalysts. Reported works indicate that high yields are attributed to catalyst acidity, mainly the ones containing Brönsted acidic sites. On the other hand, the catalyst stability and its recycling capacity are completely dependent of the support material and the acidic sites incorporation methodology. This review intends to conciliate the information spread on this topic and indicate the most assertive strategies to achieve high solketal production in short reaction time during various reaction cycles.

Influence of Genotype × Environment Interaction on Yield Stability of Maize Hybrids with AMMI Model and GGE Biplot

Maize yields perform differently in different environments, so the selection of suitable genotypes in diverse environments is essential for variety selection to enable better site-specific planting. Hence, the objective of the study was to estimate the productivity of 11 maize hybrids (G) in 10 different environments (E) and select high-yield and stable varieties for adaptive cultivation in 2022 and 2023. The combined analysis of variance showed that G (4%), E (50%), and their interaction (31%) had a significant effect (p < 0.01) on maize yield, with E factors contributing the most. In addition, the average yield ranged from 9398 kg/ha to 10,574 kg/ha, and ZF-2208 and DY-519 performed relatively well in both years. The AMMI model showed that the varieties DY-213, DY-605, and DY-519 had high and stable production in 2022, whereas it was ZF-2209 and LX-24 in 2023. The “W-W-W” biplot showed that DY-519 and JG-18 were the optimal varieties in 2022, and ZF-2208 and ZF-2210 were optimal in 2023. The “mean vs. stability” biplot indicated that JG-18, DY-605, and DY-213 (in 2022) and ZF-2208, LX-24, and ZF-2209 (in 2023) were the optimal varieties. Additionally, both the discrimination and representative biplot and the ranking biplot reflected that BinChuan and ShiDian (in 2022) and GengMa and YongSheng (in 2023) were the ideal test environments. In conclusion, DY-519, DY-605, ZF-2208, and LX-24 hybrids could be used for variety promotion. Moreover, BinChuan, ShiDian, GengMa, and YongSheng were the ideal test environments for selecting varieties. Therefore, the AMMI model and GGE biplot can be used to complement each other for a comprehensive evaluation of maize yield. In this way, excellent maize hybrids with high yield and stability can be selected, which could promote the selection and popularization of varieties and shorten the breeding process.

“Click” amphotericin B in prodrug nanoformulations for enhanced systemic fungemia treatment

Severe nephrotoxicity and infusion-related side effects pose significant obstacles to the clinical application of Amphotericin B (AmB) in life-threatening systemic fungal infections. In pursuit of a cost-effective and safe formulation, we have introduced multiple phenylboronic acid (PBA) moieties onto a linear dendritic telodendrimer (TD) scaffold, enabling effective AmB conjugation via boronate chemistry through a rapid, high yield, catalysis-free and dialysis-free “Click” drug loading process. Optimized AmB-TD prodrugs self-assemble into monodispersed micelles characterized by small particle sizes and neutral surface charges. AmB prodrugs sustain drug release in circulation, which is accelerated in response to the acidic pH and Reactive Oxygen Species (ROS) in the infection and inflammation. Prodrugs mitigate the AmB aggregation status, reduce cytotoxicity and hemolytic activity compared to Fungizone®, and demonstrate superior antifungal activity to AmBisome®. AmB-PEG5kBA4 has a comparable maximum tolerated dose (MTD) to AmBisome®, while over 20-fold increase than Fungizone®. A single dose of AmB-PEG5kBA4 demonstrates superior efficacy to Fungizone® and AmBisome® in treating systemic fungal infections in both immunocompetent and immunocompromised mice.

Comparative Study of Synthetic Insecticides with Biopesticides against Spotted Stem Borer, Chilo partellus (Swinhoe) on Maize (Zea mays L.)

Spotted stem borer, Chilo partellus (Lepidoptera: Pyralidae) regarded as one of the most significant and prevalent insect pests of maize and its mystic aspect of feeding makes it challenging to control. Hence current study aims to evaluate comparative study of synthetic insecticides with biopesticides against Chilo partellus. Eight treatments viz., azadirachtin 10,000ppm, neem oil 3%, karanj oil 3%, neem oil 3% + imidacloprid 17.5%SL, karanj oil 3% + imidacloprid 17.5%SL, imidacloprid 17.5%SL, spinosad 45%SC and untreated control were tested under field condition in randomized block design with three replications. Among the treatments, lowest larval population of Chilo partellus per plant were recorded in karanj oil 3% + imidacloprid 17.5%SL (1.99) followed by neem oil 3% + imidacloprid 17.5%SL (2.42), imidacloprid 17.5%SL (2.71), spinosad 45%SC (3.17), neem oil 3% (3.73), karanj oil 3% (3.95) and azadirachtin 10,000ppm (4.44) were found superior over the untreated control (7.24). The highest yield was recorded in karanj oil 3% + imidacloprid 17.5%SL with 39.20 q/hectare and most economic treatment was imidacloprid 17.5%SL with highest cost benefit ratio (1:2.2). The lowest cost benefit ratio was recorded in untreated control (1:1.4).

Effects of Organic Fertilizer on Photosynthesis, Yield, and Quality of Pakchoi under Different Irrigation Conditions

Water scarcity and the overuse of chemical fertilizers present significant challenges to modern agriculture, critically affecting crop photosynthesis, yield, quality, and productivity sustainability. This research assesses the impact of organic fertilizer on the photosynthetic attributes, yield, and quality of pakchoi under varying irrigation water conditions, including fresh water and brackish water. Findings reveal that the modified rectangular hyperbolic model most accurately captures the photosynthetic reaction to organic fertilization, outperforming other evaluated models. The maximum net photosynthesis rate (Pnmax), yield, soluble sugar (SS), and soluble protein content (SP) all exhibited a downward-opening quadratic parabolic trend with increasing amounts of organic fertilizer application. Specifically, under fresh-water irrigation, the optimal Pnmax, yield, SS, and SP were obtained at organic fertilizer rates of 65.77, 74.63, 45.33, and 40.79 kg/ha, respectively, achieving peak values of 20.71 µmol/(m2·s), 50,832 kg/ha, 35.63 g/kg, and 6.25 g/kg. This investigation provides a foundational basis for further research into the intricate relationship between water salinity stress and nutrient management, with the goal of crafting more sophisticated and sustainable farming methodologies. The insights gained could significantly influence organic fertilizer practices, promoting not only higher yields but also superior quality in agricultural outputs.

The implication of standard units of weights and measures on small-holder farmers maize productivity and welfare in Ruvuma Region, Tanzania

The accurate measurement of agricultural productivity and its consequential effects on the welfare of farmers plays a pivotal role in economies heavily dependent on agriculture. This study delves into the repercussions of employing standard weights and measures on both productivity and welfare in the Ruvuma Region of Tanzania. Employing a cross-sectional design, primary data were collected from 557 households selected at random from six districts within Ruvuma region. Utilizing negative binomial and multiple regression models, the study scrutinizes the impact of standard weights and measures on maize productivity and farmer welfare. The findings elucidate a noteworthy correlation between the adoption of standard units and amplified maize productivity and cash income. Farmers utilizing standard measurements in maize transactions exhibited a 19.5% higher yield per acre and a 14.5% improvement in welfare compared to those adhering to traditional measuring methods. Influential factors such as sex, the quantity of maize produced, and land size significantly influenced the adoption of standard units. Recommending empowerment initiatives through government agencies and pertinent organizations, this study advocates for targeted training and sensitization to redirect small-holder farmers from traditional measuring practices. Such endeavours align with Sustainable Development Goal 2, contributing to the overarching aim of achieving zero hunger by 2030.

The Influence of Solid Heat Carrier Load of Char on Pyrolysis Characteristics of Pulverized Coal in a Fluidized Bed Reactor

Pulverized coal pyrolysis based on solid heat carrier has a huge advantage in high tar yield. In this study, pyrolysis experiments on pulverized coal were conducted in a lab-scale fluidized bed reactor at 650 °C, utilizing char as the solid heat carrier. The influence of mass ratio of char to coal (RATIO) was investigated. Results show that the incorporation of solid heat carrier of char significantly enhanced the primary pyrolysis reaction in coal pyrolysis, resulting in increasing yields of tar and gas but reducing one of char. The yield of tar maximally reached 148.80–262.22% of the Gray–King analysis value at the RATIO of 14.52 g/g. As the RATIO increased, the tar contained more light component content, indicating that incorporating solid heat carriers improved the tar quality. These findings offer significant insights for the design of fluidized bed pyrolysis unit utilizing char as solid heat carrier.

M2WISH: An easy and efficient protocol for whole‐mount mRNAin situ hybridization that allows 3D cell resolution of gene expression in Arabidopsis thaliana

SUMMARYGene expression analysis is essential for understanding the mechanisms involved in plant development. Here, we developed M2WISH, a protocol based on MicroWave treatment for Wholemount mRNA In Situ Hybridization in Arabidopsis. By permeabilizing tissues without damaging cellular organization this protocol results in high and homogeneous hybridization yields that enable systematic analysis of gene expression dynamics. Moreover, when combined with cellular histochemical staining, M2WISH successfully provides a cellular resolution of gene expression. Thus, we demonstrate the robustness of M2WISH with 10 genes on roots, aerial meristems, leaves, and embryos in the seed. We applied M2WISH to study the spatial dynamics of WUSCHEL (WUS) and CLAVATA3 (CLV3) expression during in vitro meristematic conversion of roots into shoot apical meristems. Thus, we showed that shoot apical meristems could arise from two different types of root structures that differed by their CLV3 gene expression patterns. We constructed 3D cellular representations of WUS and CLV3 gene co‐expression pattern and stressed the variability inherent to meristem conversion. Thus, this protocol generates a large amount of data on the localization of gene expression, which can be used to model complex systems.

Cyclic Azahelicene Dimers ShowingBright Circularly Polarized Luminescence and Selective Fluoride Recognition.

Although helicenes are promising molecules, the synthetic difficulty and tediousness have often been problems, and only small amounts of optically pure helicenes have been obtained by using chiral HPLC in most cases. Herein, aza[7]helicenes or closed-aza[7]helicenes with(1R)-menthyl substituents were selectively synthesized via the intramolecular Scholl reaction, and the diastereomeric pairs were separated by silica gel column chromatography. The optically pure helicenes were further transformed into the corresponding cyclic dimers, and the chiroptical properties were investigated. The rigidp-frameworks of the dimers led to the high molar extinction coefficients and fluorescence quantum yields, while the twisted helicene moieties induced clear Cotton effects and CPLin the visible region,and thehighCPL brightness (BCPL) was achieved. Furthermore, the cyclic dimers were found to have the macrocyclic cavity with the two NH groups suitable for the selective binding of a fluoride anion, which induced significantly redshifted fluorescence and CPL in the red region.

Microwave-Assisted dry reforming of toluene as a model tar compound using low-cost iron catalyst for syngas clean-up

Gasification of waste feedstock such as biomass, waste plastics suffers from high tar yields during hydrogen-rich syngas production. The presence of tars result in lower quality syngas, lower syngas yields, reactor blockage, reactor down time, and costly maintenance. Therefore, removal of tar from syngas during gasification is essential. Catalytic reforming of tars via in-situ syngas cleanup is an effective way of mitigating tars. This work explores the possibility of microwave-assisted catalytic dry reforming of tars for syngas production. Due to its chemical complexity, toluene, which is one of the main tar constituents, could be used as a model tar compound. Toluene dry reforming was studied using the Fe/Al2O3 catalyst under CO2 under the temperature range of 400–700 ℃. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. Under microwave irradiation, CO2 and toluene conversions are boosted to 80% at 500 ℃. Hydrogen and carbon monoxide yields were approximately five times and ten times higher in the microwave reactor at 500 ℃, respectively, compared to the productions obtained in the conventional fixed-bed reactor at 700 ℃. Filamentous carbon was also produced as a valuable side product to improve the economy of this process and such value-added carbon was only observed in the microwave reactor. Three reaction pathways were observed during microwave reaction: the toluene decomposition produces an initial hydrogen and carbon deposit on the catalyst; the formation of methane and benzene suggests toluene hydrodemethylation as a secondary reaction; and toluene hydrogenolysis forms light alkanes such as methane, and through reforming reaction under CO2 to syngas.

Resorcinol‐Phthalaldehyde Resins for Photosynthesis of Hydrogen Peroxide: Modulation of Electronic Structure and Integration of Dual Channel Pathway

AbstractModulating of electronic structure of photocatalyst and integration of dual channel pathway are promising strategy for efficient photosynthesis of hydrogen peroxide (H2O2) from pure water without sacrificial agent and oxygen exposure. In this work, nontoxic aromatic dialdehyde is used to replace the commonly used toxic formaldehyde to form resorcinol‐phthalaldehyde resins through a hydrothermal method. The introducing of aromatic ring as π spacer increases the separation distance of electrons and holes to avoid their recombination. H2O2 can be produced via integrated oxygen reduction reaction (ORR) and water oxidation reaction (WOR) due to the suitable energy band positions and spatially separated reaction sites. Resorcinol‐p‐phthalaldehyde (RP) resin exhibits a promising H2O2 yield of 3351 µmol g−1 h−1 with high apparent quantum yield (AQY) of 14.9% at 420 nm and solar‐to‐chemical conversion (SCC) efficiency of 1.54%. This work provides a simple strategy to modulate the charge separation efficiency and redox reaction pathway on photocatalyst at molecular level design.

Green‐Emissive Carbon Dots with a High Quantum Yield Applied for Photoconversion Film to Prevent from Blue Light Damage

AbstractHigh‐energy blue light is highly detrimental to health as it can penetrate the lens into the retina, potentially causing atrophy or even death of retinal pigment epithelial cells. To prevent the harmful effects of high‐energy blue light on our health, here the preparation of a photoconversion film specifically designed to block high‐energy blue light is reported, which is composed of green‐emissive carbon dots (G‐CDs) with a high photoluminescence quantum yield (PLQY = 95%) dispersed in polyvinyl alcohol (PVA) matrix. Notably, such a film (named as G‐CDs@PVA) not only converts an incident laser light with a short wavelength into a fluorescence with a longer wavelength, but also exhibits concentration‐dependent (0, 10, 20, and 30 wt.%) blue light barrier rate and green‐emissive intensity. With the increase of the concentration of G‐CDs in the film, the blue light barrier rate of the film as well as the maximum intensity of the green emission are also increased. When the concentration of G‐CDs reaches 30 wt.%, the blue light barrier rate of G‐CDs@PVA achieves up to 97%. Furthermore, G‐CDs@PVA film is attached to a blue light‐emitting diode (LED) chip to explore its practical application in the field of blocking blue light damage.

Cyclic Azahelicene Dimers Showing Bright Circularly Polarized Luminescence and Selective Fluoride Recognition

Although helicenes are promising molecules, the synthetic difficulty and tediousness have often been problems, and only small amounts of optically pure helicenes have been obtained by using chiral HPLC in most cases. Herein, aza[7]helicenes or closed‐aza[7]helicenes with (1R)‐menthyl substituents were selectively synthesized via the intramolecular Scholl reaction, and the diastereomeric pairs were separated by silica gel column chromatography. The optically pure helicenes were further transformed into the corresponding cyclic dimers, and the chiroptical properties were investigated. The rigid p‐frameworks of the dimers led to the high molar extinction coefficients and fluorescence quantum yields, while the twisted helicene moieties induced clear Cotton effects and CPL in the visible region, and the high CPL brightness (BCPL) was achieved. Furthermore, the cyclic dimers were found to have the macrocyclic cavity with the two NH groups suitable for the selective binding of a fluoride anion, which induced significantly redshifted fluorescence and CPL in the red region.

Optimization of ultrasonic pretreatment and analysis of chlorogenic acid in potato leaves

Chlorogenic acid (CA) is an effective ingredient that can strengthen immunity during following the COVID-19 era. The current cost of CA is high owing to its complex purification process and low yield (approximately 2%). In this study, a one-step path orthogonal experiment was designed based on the results from Gauss calculation, which consisted of acidity, coordination, and hydrolysis in molecules. The optimized extraction conditions were 60 ℃, 60 min, 1:20 liquid ratio, and 40% ethanol in a nitrogen atmosphere controlled using a device of our own design, which led to CA yields of up to 6.35% from potato leaves. The purified CA was analyzed using high-performance liquid chromatography, thin-layer chromatography, ultraviolet–visible spectroscopy, and molecular fluorescence. This accurate and reproducible method can not only be used to obtain high yields of CA but can also be used for the quality control of active plant products and their isomers.

High yield electrosynthesis of oxygenates from CO using a relay Cu-Ag co-catalyst system

As a sustainable alternative to fossil fuel-based manufacture of bulk oxygenates, electrochemical synthesis using CO and H2O as raw materials at ambient conditions offers immense appeal. However, the upscaling of the electrosynthesis of oxygenates encounters kinetic bottlenecks arising from the competing hydrogen evolution reaction with the selective production of ethylene. Herein, a catalytic relay system that can perform in tandem CO capture, activation, intermediate transfer and enrichment on a Cu-Ag composite catalyst is used for attaining high yield CO-to-oxygenates electrosynthesis at high current densities. The composite catalyst Cu/30Ag (molar ratio of Cu to Ag is 7:3) enables high efficiency CO-to-oxygenates conversion, attaining a maximum partial current density for oxygenates of 800 mA cm−2 at an applied current density of 1200 mA cm−2, and with 67 % selectivity. The ability to finely control the production of ethylene and oxygenates highlights the principle of efficient catalyst design based on the relay mechanism.

Exome Sequencing has a high diagnostic rate in sporadic congenital hypopituitarism and reveals novel candidate genes.

The pituitary gland is key for childhood growth, puberty, and metabolism. Pituitary dysfunction is associated with a spectrum of phenotypes, from mild to severe. Congenital Hypopituitarism (CH) is the most commonly reported pediatric endocrine dysfunction with an incidence of 1:4000, yet low rates of genetic diagnosis have been reported. We aimed to unveil the genetic etiology of CH in a large cohort of patients from Argentina. We performed whole exome sequencing of 137 unrelated cases of CH, the largest cohort examined with this method to date. Of the 137 cases, 19.1% and 16% carried pathogenic or likely pathogenic variants in known and new genes, respectively, while 28.2% carried variants of uncertain significance. This high yield was achieved through the integration of broad gene panels (genes described in animal models and/or other disorders), an unbiased candidate gene screen with a new bioinformatics pipeline (including genes high loss of function intolerance), and analysis of copy number variants. Three novel findings emerged. First, the most prevalent affected gene encodes the cell adhesion factor ROBO1. Affected children had a spectrum of phenotypes, consistent with a role beyond pituitary stalk interruption syndrome. Second, we found that CHD7 mutations also produce a phenotypic spectrum, not always associated with full CHARGE syndrome. Third, we add new evidence of pathogenicity in the genes PIBF1 and TBC1D32, and report 13 novel candidate genes associated with CH (e.g. PTPN6, ARID5B). Overall, these results provide an unprecedented insight into the diverse genetic etiology of hypopituitarism.