Higher Mean Temperatures Research Articles

Effect of various temperature indicators on patients' hospitalization with cardiovascular diseases in Zhangye city, China.

This study assessed the impact of various temperature indices, including mean temperature (MT), diurnal temperature range (DTR), and temperature changes between neighboring days (TCN) on hospitalization rates for cardiovascular system diseases among residents of Zhangye City, a typical western city in China. The Quasi-Poisson generalized additive regression model (GAM) in conjunction with a distributed lag nonlinear model (DLNM) was applied to estimate the association of temperature indices with CVD hospitalization rates in Zhangye City during the periods of 2015-2021. The exposure-response relationship and relative risk were discussed and stratified analyses by age and gender were conducted. We found that the hospitalization rates of cardiovascular disease (CVD) patients in Zhangye City was significantly related to different temperature indicators (MT, DTR, TCN). Both low and high MT, DTR, and TCN increased the risk of cardiovascular disease (CVD) among residents. Besides, different demographic populations exhibited distinct sensitivities to temperature conditions. Relevant authorities should devise corresponding preventive and control measures to protect vulnerable populations.

Temperature variability regulates the interactive effects of warming and pharmaceutical on aquatic ecosystem dynamics

Climate warming and pharmaceutical contaminants have profound impacts on population dynamics and ecological community structure, yet the consequences of their interactive effects remain poorly understood. Here, we explore how climate warming interacts with pharmaceutical-induced boldness change to affect aquatic ecosystems, built on an empirically well-informed food-chain model, consisting of a size-structured fish consumer, a zooplankton prey, and a fish predator. Climate warming is characterized by both daily mean temperature (DMT) and diurnal temperature range (DTR) in our model. Results show that DMT and high levels of species’ boldness are the primary drivers of community instability. However, their interactive effects can lead to diverse outcomes: from predator collapse to coexistence with seasonality-driven cycles and coexistence with population interaction-driven cycles. The interactive effects are significantly modulated by daily temperature variability, where moderate DTR counteracts the destabilizing interactive effects by increasing consumer reproduction, while large temperature variability considerably reduces consumer biomass, destabilizing the community at high mean temperatures. Our analyses disentangle the respective roles of DMT, DTR and boldness in mediating the response of aquatic ecosystems to the impacts from pharmaceutical contaminants in the context of climate warming. The interactive effects of the environmental stressors reported here underscore the pressing need for studies aimed at quantifying the cumulative impacts of multiple environmental stressors on aquatic ecosystems.

Chronic and acute thermal stressors have non-additive effects on fertility.

Climate change is driving both higher mean temperatures and a greater likelihood of heatwaves, which are becoming longer and more intense. Previous work has looked at these two types of thermal stressors in isolation, focusing on the effects of either a small, long-term increase in temperature or a large, short-term increase in temperature. Yet, a fundamental gap in our understanding is the combined effect of chronic and acute thermal stressors and, in particular, its impact on vital processes such as reproduction. Here, we investigated the independent and interactive effects of higher constant temperatures and short-term heatwave events on reproductive success and offspring fitness in an insect study system, the burying beetle Nicrophorus vespilloides. We found a substantial reduction in key fitness traits (fecundity, hatching success and offspring size) after exposure to both a heatwave and higher constant temperatures, but not after exposure to only one of these thermal stressors. This indicates that the effects of chronic and acute thermal stressors are amplified when they act in combination, as is very likely to occur in natural populations. Our findings, therefore, suggest that, by not considering the potential multiplicative effects of different types of thermal stressors, we may be underestimating the effects of climate change on animal fertility.

Suitability of Residues from Seaweed and Fish Processing for Composting and as Fertilizer

There is a need to find novel sources of fertilizers to meet the increasing food demands of a growing human population and alternatives to mined and synthetic fertilizers for the certified organic sector. Composting is a common method for processing and stabilizing organic residues for use in horticulture. To that end, a small-scale composting experiment with six combinations of dried and ground rockweed (Ascophyllum nodosum), algae fiber from chemically processed rockweed, ground bones and fishmeal from cod (Gadus morhua), and ground blue mussels (Mytilus edulis) was conducted in Dewar flasks to assess whether these residues are suitable for composting and have potential for use as fertilizers. Expanded clay aggregates were used as a bulking material. Physicochemical analyses were performed on the residues and their mixtures before and after composting, and the temperature in the flasks was monitored for 92 days. Suitability was determined by evaluating the temperature dynamics, changes in physiochemical parameters, and nutrient profiles. All treatments generated heat, with reductions in C/N ratio, weight, and volume, demonstrating suitability for composting. The treatments with algae fiber had a higher mean temperature (34.5 vs. 29.0 °C) and more degree days above the thermophilic range (mean = 176- vs. 19-degree days), the greatest reduction in volume (mean = 35% vs. 27%), and the lowest C/N ratios at the end of active composting (18 vs. 24) compared to the treatments with dried and ground seaweed. In terms of fertilizer value, none of the finished composts were balanced for use as fertilizers alone and, in some cases, contained too much Na, but contained sufficient concentrations of K, S, Mg, and Ca and could be a valuable source of these nutrients and organic matter in combination with other N- and P-rich sources.

Factors influencing fumonisin B1 contamination in maize: insights from two production regions in Costa Rica.

Maize (Zea mays L.) is an important cereal crop worldwide. Contaminated maize kernels pose a significant mycotoxin exposure risk for humans in Latin America. Fumonisins, the most prevalent mycotoxin in maize, typically occur during pre-harvest conditions leading to significant economic losses. Various factors, including weather conditions, may influence this contamination. This study aimed to determine the association between fumonisin B1 (FB1) contamination, prevalence of Fusarium verticillioides, weather conditions and kernel quality in the two primary maize production areas in Costa Rica (Brunca and Chorotega). All maize samples (100%) showed FB1 contamination, with higher concentrations in samples from Brunca region, consistent with the presence of F. verticilliodes. Weather conditions appeared to play an important role in this contamination, since Brunca region had the highest mean temperature and relative humidity after maize silking (R1) and the total monthly rainfall in this region was significantly higher during the last two months of maize cultivation (grain-filling and physiological maturity stages R3 to R6). Interestingly, this study found a negative correlation between grain damage and kernel contamination with FB1 and F. verticillioides. The concentration of mineral nutrients in kernels from both regions was largely similar. Most nutrients in kernels exhibited a negative correlation with FB1, particularly nitrogen. Zinc and phosphorus were the only nutrients in kernels showing a positive correlation with FB1 in samples from the Brunca region. The results highlight elevated levels of FB1 contamination in maize and contribute to a better understanding of pre-harvest factors influencing FB1 contamination in tropical conditions.

Local thermal adaption mediates the sensitivity of Daphnia magna to nanoplastics under global warming scenarios

The toxicity of nanoplastics at environmentally relevant concentrations has received widespread attention in the context of global warming. Despite numerous studies on the impact of mean temperature (MT), the effects of daily temperature fluctuations (DTFs) on the ecotoxicity of nanoplastics remains largely unexplored. Moreover, the role of evolutionary adaptation in assessing long-term ecological risks is unclear. Here, we investigated the effects of polystyrene nanoplastics (5 μg L-1) on Daphnia magna under varying MT (20 °C and 24 °C) and DTFs (0 °C, 5 °C, and 10 °C). Capitalizing on a space-for-time substitution approach, we further assessed how local thermal adaptation affect the sensitivity of Daphnia to nanoplastics under global warming. Our results indicated that nanoplastics exposure in general reduced heartbeat rate, thoracic limb activity and feeding rate, and increased CytP450, ETS activity and Hgb concentrations. Higher MT and DTFs enhanced these effects. Notably, clones originating from their respective sites performed better under their native temperature conditions, indicating local thermal adaptation. Warm-adapted low-latitude D. magna showed stronger nanoplastics-induced increases in CytP450, ETS activity and Hgb concentrations under local MT 24 °C, while cold-adapted high-latitude D. magna showed stronger nanoplastics-induced decreases in heartbeat rate, thoracic limb activity and feeding rate under high MT than under low MT.

High temperature and nib acidification during cacao-controlled fermentation improve cadmium transfer from nibs to testa and the liquor’s flavor

Migration of nib Cd to the testa during fermentation can be achieved with high temperatures (> 45 °C) and low nib pH values (< 5.0) using spontaneous fermentation. However, this low pH can lead to low flavor quality. This study used three controlled temperature fermentation treatments on three cacao genotypes (CCN 51, ICS 95, and TCS 01) to test its effects on the nib pH, the migration of nib Cd to the testa, and the liquor flavor quality. All treatments were effective in reducing the total nib Cd concentration. Nevertheless, the treatment with the higher mean temperature (44.25 °C) and acidification (pH 4.66) reached the highest mean nib Cd reductions throughout fermentation, a 1.37 factor in TCS 01, promoting the development of fine-flavor cocoa sensorial notes. In unfermented beans, the Cd concentration of nibs was higher than that of the testa, and the Cd migration proceeded down the total concentration gradient. However, Cd migration was observed against the concentration gradient (testa Cd > nib Cd) from the fourth day. Cd migration could increase by extensive fermentation until the sixth day in high temperatures and probably by the adsorbent capacity of the testa. Genotype-by-treatment interactions were present for the nib Cd reduction, and a universal percentage of decrease of Cd for each genotype with fermentation cannot be expected. Selecting genotypes with highly adsorbent testa combined with controlled temperatures would help reduce the Cd concentration in the cacao raw material, improving its safety and quality.

Variables that predict hospital stay and the outcome of Fournier gangrene at King Abdulaziz University Hospital: a retrospective study

BackgroundThe aggressive nature of Fournier gangrene and the associated health issues can result in a more complex clinical course and potentially a longer hospital stay. This study aimed to assess factors that affect the length of hospital stay (LHS) and its relation to the outcome of Fournier gangrene patients.MethodsA retrospective study was performed at King Abdulaziz University Hospital (KAUH), Saudi Arabia, on patients diagnosed with Fournier gangrene between 2017 and 2023. Data about length of hospital stay (LHS), age, BMI, clinical and surgical data and outcome was obtained.ResultsThe mean age of the studied patients was 59.23 ± 11.19 years, the mean body mass index (BMI) was 26.69 ± 7.99 kg/m2, and the mean duration of symptoms was 10.27 ± 9.16 days. The most common presenting symptoms were swelling or induration (64%), 88% had comorbidities with diabetes mellitus (DM) (84%), and 76% had uncontrolled DM. of patients, 24% had a poly-microbial infection, with E. coli being the most common (52%). The mean length of hospital stay (LHS) was 54.56 ± 54.57 days, and 24% of patients had an LHS of more than 50 days. Longer LHS (> 50 days) was associated with patients who did not receive a compatible initial antibiotic, whereas shorter LHS was associated with patients who received Impenem or a combination of vancomycin and meropenem as alternative antibiotics following incompatibility. Reconstruction patients had significantly longer LHS and a higher mean temperature. However, none of the studied variables were found to be predictors of long LHS in the multivariate regression analysis.ConclusionKnowledge of the values that predict LHS allows for patient-centered treatment and may be useful in predicting more radical treatments or the need for additional treatment in high-risk patients. Future multicenter prospective studies with larger sample sizes are needed to assess the needed variables and predictors of long LHS.

The impact of meteorological parameters on the scrub typhus incidence in Baoshan City, western Yunnan, China.

Scrub typhus has become widespread across various regions in China in recent decades, causing a considerable burden on residents. While meteorological variables significantly impact the spread of scrub typhus, there is insufficient quantitative evidence illustrating this association in known high-endemic areas. A distributed lag non-linear model was applied to explore the relationship between meteorological parameters and scrub typhus incidence from 2010 to 2019 in Baoshan City, western Yunnan Province, China. High monthly mean (20°C) and maximum (30°C) temperatures were associated with a peak risk of scrub typhus in the current month. Higher minimum temperatures and higher relative humidity were followed by increasing cumulative risks over the ensuing 3 months. Higher precipitation was followed by increasing cumulative risk over the ensuing 2-month period, peaking at around 30 cm. The non-linear lag associations between meteorological parameters and scrub typhus incidence suggest that higher monthly minimum temperature and relative humidity could be associated with an increased risk of scrub typhus in the subsequent several months, while warm temperature is more likely to impact the occurrence of scrub typhus in the current month.

Green deserts, but not always: A global synthesis of native woody species regeneration under tropical tree monocultures.

Tree monocultures constitute an increasing fraction of the global tree cover and are the dominant tree-growing strategy of forest landscape restoration commitments. Their advantages to produce timber are well known, but their value for biodiversity is highly controversial and context dependent. Therefore, understanding whether, and in which conditions, they can harbor native species regeneration is crucial. Here, we conducted meta-analyses based on a global survey of the literature and on a database created with local, unpublished studies throughout Brazil to evaluate the regeneration potential of native species under tree monocultures and the way management influences this regeneration. Native woody species regeneration under tree monocultures harbors a substantial fraction of the diversity (on average 40% and 68% in the global and Brazilian surveys, respectively) and abundance (on average 25% and 60% in the global and Brazilian surveys, respectively) of regeneration observed in natural forests. Plantations with longer rotation lengths, composed of native tree species, and located adjacent to forest remnants harbor more species. Pine plantations harbor more native individuals than eucalypt plantations, and the abundance of regenerating trees is higher in sites with higher mean temperatures. Species-area curves revealed that the number of woody species under pine and eucalypt plantations in Brazil is 606 and 598 species, respectively, over an aggregated sampled area of ca. 12 ha. We highlight that the understory of tree monocultures can harbor a considerable diversity of regenerating native species at the landscape and regional scales, but this diversity strongly depends on management. Long-rotation length and favorable location are key factors for woody regeneration success under tropical tree monocultures. Therefore, tree monocultures can play a role in forest landscape restoration and conservation, but only if they are planned and managed for achieving this purpose.

Thermographic Profiles in Livestock Systems under Full Sun and Shaded Pastures during an Extreme Climate Event in the Eastern Amazon, Brazil: El Niño of 2023.

The El Niño represents a substantial threat to pastures, affecting the availability of water, forage and compromising the sustainability of grazing areas, especially in the northern region of Brazil. Therefore, the objective of this study was to characterize the thermographic profile of three production systems in the Eastern Amazon, Brazil. The study was conducted on a rural cattle farm in Mojuí dos Campos, Pará, Brazil, between August and November 2023. The experiment involved livestock production systems, including traditional, silvopastoral and integrated, with different conditions of shade and access to the bathing area. An infrared thermographic (IRT) camera was used, recording temperatures in different zones, such as areas with trees, pastures with forage and exposed pastures. The highest mean temperatures (p = 0.02) were observed in pastures with full sun from August to November. On the other hand, the lowest average temperatures were recorded in areas shaded by chestnut trees (Bertholletia excelsa). The highest temperature ranges were found in sunny areas and the lowest were recorded in shaded areas. The highest temperatures were observed in the pasture in full sun, while the lowest were recorded in areas shaded by chestnut trees (p < 0.0001). The interaction between the systems and treatments revealed significant temperature differences (p < 0.0001), with the native trees showing an average temperature of 35.9 °C, lower than the grasses and soil, which reached 61.2 °C. This research concludes that, under El Niño in the Eastern Amazon, areas shaded by Brazil nut trees had lower temperatures, demonstrating the effectiveness of shade. Native trees, compared to grasses and soil, showed the ability to create cooler environments, highlighting the positive influence on different species such as sheep, goats and cattle.

Seedling recruitment in response to stand composition, interannual climate variability, and soil disturbance in the boreal mixed woods of Canada

AbstractAimSeedling recruitment is a vital process for forest regeneration and is influenced by various factors such as stand composition, climate, and soil disturbance. We conducted a long‐term field experiment (18 years) to study the effects of these factors and their interactions on seedling recruitment.LocationOur study focused on five main species in boreal mixed woods of eastern Canada: trembling aspen (Populus tremuloides), paper birch (Betula papyrifera), white spruce (Picea glauca), balsam fir (Abies balsamea), and white cedar (Thuja occidentalis).MethodsSixteen 1‐m2 seedling monitoring subplots were set up in each of seven stands originating from different wildfires (fire years ranging from 1760 to 1944), with a soil scarification treatment applied to every other subplot. Annual new seedling counts were related to growing‐season climate (mean temperature, growing degree days and drought code), scarification, and stand effects via a Bayesian generalized linear mixed model.ResultsSoil scarification had a large positive effect on seedling recruitment for three species (aspen, birch and spruce). As expected, high mean temperatures during the seed production period (two years prior to seedling emergence) increased seedling recruitment for all species but aspen. Contrary to other studies, we did not find a positive effect of dry conditions during the seed production period. Furthermore, high values of growing degree days suppressed conifer seedling recruitment. Except for white cedar, basal area was weakly correlated with seedling abundance, suggesting a small number of reproductive individuals is sufficient to saturate seedling recruitment.ConclusionOur findings underscore the importance of considering multiple factors, such as soil disturbance, climate, and stand composition, as well as their effects on different life stages when developing effective forest management strategies to promote regeneration in boreal mixed‐wood ecosystems.

The impact of short-term exposure to meteorological factors on the risk of death from hypertension and its major complications: a time series analysis based on Hefei, China.

This study aimed to reveal the short-term impact of meteorological factors on the mortality risk in hypertensive patients, providing a scientific foundation for formulating pertinent prevention and control policies. In this research, meteorological factor data and daily death data of hypertensive patients in Hefei City from 2015 to 2018 were integrated. Time series analysis was performed using distributed lag nonlinear model (DLNM) and generalized additive model (GAM). Furthermore, we conducted stratified analysis based on gender and age. Relative risk (RR) combined with 95% confidence interval (95% CI) was used to represent the mortality risk of single day and cumulative day in hypertensive patients. Single-day lag results indicated that high daily mean temperature (T mean) (75th percentile, 24.9°C) and low diurnal temperature range (DTR) (25th percentile, 4.20°C) levels were identified as risk factors for death in hypertensive patients (maximum effective RR values were 1.144 and 1.122, respectively). Extremely high levels of relative humidity (RH) (95th percentile, 94.29%) reduced the risk of death (RR value was 0.893). The stratified results showed that the elderly and female populations are more susceptible to low DTR levels, whereas extremely high levels of RH have a more significant protective effect on both populations. Overall, we found that exposure to low DTR and high T mean environments increases the risk of death for hypertensive patients, while exposure to extremely high RH environments significantly reduces the risk of death for hypertensive patients. These findings contribute valuable insights for shaping targeted prevention and control strategies.

Legacy effects of crop sequencing on biomass and their variability on farmers' fields in Finland are shaped by weather, farm conditions and rationales for land use

CONTEXTThe legacy effect of a previous crop on a subsequent crop in rotation is a valuable and often underutilized ecosystem service which can provide benefits when designing cropping systems, especially in the case of cereal-based land use. OBJECTIVETo support future diversification of crop sequencing in Finland, this study was carried out with the aims to identify the variation in the pre-crop values of relevant crop combinations in farmers' fields in Finland, depending on the weather and farm conditions. METHODSWe used a method developed to estimate on-farm realized pre-crop value from Sentinel − 2 images available annually for 120,174–711,828 field parcels in Finland during 2016–2020 (the total number of observations was >1,818,000). RESULTS AND CONCLUSIONSBoth the weather and farming conditions explained the variation in the pre-crop values, which might range from positive to negative. For example, a higher mean temperature and fewer rainy days during the growing season of a previous crop often reduced the legacy effects of crop sequencing, however, this was dependent on the crop choices. A higher number of rainy days and elevated temperatures during the subsequent crop's season often increased the pre-crop value, while prolonged droughts in either of the growing seasons tended to reduce these. The farmers' current land use did not support the realization of pre-crop value – especially in the case of potential benefits provided by grasslands for croplands. SIGNIFICANCEThis study highlights the challenges that weather variation and complexity of the production systems may cause for a farmer when aiming to identify the impacts of crop sequencing on yields, ecosystem services, and farm economy. Hence, there is an evident need to develop a decision support system that recognizes regional farming systems, available crop choices, crop management, weather conditions, and the farmers' rationale concerning decision making.

How Does the Provision of Shade during Grazing Affect Heat Stress Experienced by Dairy Cows in Sweden?

Heat stress in dairy cows can cause an increase in body temperature and respiration rate, and a decreased feed intake leading to reduced production. Dairy cows are better at handling heat when they have access to shade. Therefore, this study aimed to determine the effects of providing shade to high-yielding dairy cattle during the summer in the Swedish climate. Twenty high-yielding Swedish Red dairy cows, held on pasture, were divided into two groups, one with access to shade (S) and one without (NS). Milk production was recorded daily and shade temperature and relative humidity were recorded at 10 min intervals at pasture. A major effect of heat stress was found in cows in early lactation in the NS group. In this group, a high mean temperature two days before and a high THI two days before affected the milk production negatively (p < 0.001), which was the same for the maximum temperature and maximum THI measured on the same day (p < 0.001). Increases in the mean temperature and THI two days before also affected milk production negatively (p < 0.05) for cows in early lactation in the S group, though to a lesser extent. This study suggests that dairy cows in early lactation benefit from access to shade during summer.

Characterization and Evaluation of Faba Bean (Vicia faba L.) Germplasm Collected from Kashmir, India

Faba bean (Vicia faba) is an ancient legume crop with high protein content of around 27%. In this study 39 local faba bean genotypes differing in seed shape, size and color were collected from different areas of Kashmir valley and evaluated during three successive rabi growing seasons of 2019–20, 2020–21 and 2021–22. Data were recorded on ten agro-morphological traits viz., plant height, number of branches/plant, days to 50% flowering, days to 80% maturity, pod length, pod width, number of seeds/pod, pod yield/plant, seed yield/plant and 100-seed weight. Average plant height ranged from 55.8 to 91.3 cm, pod length 5.2 to 9.7 cm, pod width 1.1 to 1.8 cm, seed yield/plant 18.748 to 42.050 g and 100-seed weight 41.118 to 89.966 g. Pod yield/plant evaluated during one year of 2021–22 only ranged from 43.633 to 199.930 g with a mean value of 99.981 g. The results have indicated significant variability in most of these traits. Flattened, medium-sized, beige seeds were more common traits in these faba bean genotypes. Lower mean plant height, number of branches/plant, pod length and seed yield/plant were recorded in 2021–22 than the other two experimental years due to lower rainfall and higher mean temperatures during the active vegetative, flowering and pod filling stages. Principal component and cluster analysis revealed three distinct clusters mainly on the basis of greater agro-morphological similarity. Interestingly, 8 genotypes with the highest individual 100-seed weight were clustered in a separate group with an average 100-seed weight of 83.997 g. Besides, this cluster recorded highest average plant height, pod length, pod width and seed yield/plant as well; all these traits showed significant positive correlations with each other. Therefore, these traits should be considered when selecting faba bean genotypes to improve the region’s crop performance.

Two-horn quiescent prominence observed in Hα and Mg II h&amp;k lines with THEMIS and IRIS

Context. Prominences are large magnetic structures in the corona filled by cool plasma with fast evolving fine structure. Aims. We aim to better understand the plasma conditions in the fine structure of a quiescent prominence including two transient horns observed at the bottom of the cavity using the high resolution Interface Region Imaging Spectrograph (IRIS) and the MulTi-Raies (MTR) spectrograph of the Télescope Heliographique pour l’Etude du Magnétisme et des Instabilités Solaires (THEMIS) in the Canary Islands. Methods. We analysed the spectra obtained in Hα by THEMIS and Mg II by IRIS and compare them with a grid of 23 940 1D radiative transfer models which include a prominence-to-corona transition region (PCTR). The full observed profiles of Mg II in each pixel are fitted completely by synthesised profiles with ×RMS (Cross RMS; an improved version of the rolling root mean square (rRMS) method). When the RMS is below a certain threshold value, we recover the plasma conditions from the parameters of the model best fitting the observed line profile. This criterion is met in two regions (the horns and edge of the prominence) where the line profiles can generally be described as single peaked. Results. The 1D models suggest that two different kinds of model atmospheres correspond to these two regions. The region at the edge is found to be fitted mainly with isothermal and isobaric models, while the other area (the horns) is seen to be fitted with models with a PCTR that have optical thicknesses of less than 5. In the prominence edge, the theoretical relationship between the integrated intensities in Hα and Mg II is verified and corresponds to low emission measure values. In these regions the electron density is around 1010 cm−3, while it is one order of magnitude less in the horn regions around 109 cm−3. Conclusions. In the horns, we find some profiles are best fitted with models with high mean temperatures. This suggests that the hot PCTR found in the horns could be interpreted as prominence plasma in condensation phase at the bottom of the coronal cavity.

The association between acute otitis externa-related emergency department visits and extreme weather events in a temperate continental climate

BackgroundClimate change is a global challenge that is resulting in an increased occurrence of extreme weather events. Extreme weather events have been shown to negatively impact various health conditions, leading to an overall increase in morbidity and mortality. Ear, nose, and throat (ENT) emergencies are among the most common reasons for emergency department visits (EV). Acute otitis externa (AOE), an inflammatory external auditory canal skin infection, is the second most common condition for ENT-related emergency admissions. Previously, AOE has been associated with higher temperatures during summer; However, no data exists on extreme weather events’ immediate and delayed effects on AOE-related EVs. Identifying these relationships could help predict EVs, optimize health resources, and relieve its significant burden on healthcare systems. ObjectiveThis study aimed to associate the effects of extreme weather events with the immediate and delayed risk of AOE-related EVs. MethodsA total of 1522 AOE-related EVs from the ENT outpatient clinic of the Vienna General Hospital between 2015 and 2018 were analyzed. Meteorological data for the same study period was obtained from the Austrian Central Institution for Meteorology and Geodynamics for Vienna and a distributed lag non-linear model used to associate extreme weather events with the total number of AOE-related EVs. Relative risk (RR) and cumulative RR were analyzed over a period of 14 days. ResultsAOE-related EVs showed a pronounced seasonality, with the highest occurrence in summer. The RR for AOE-related EVs was significantly increased one day after high-temperature events for seven days, to a maximum of 1.95 [1.04–3.65]. Low and high relative humidity significantly reduced the same-day occurrence of AOE-related EVs to 0.65 [0.46–0.92] and 0.74 [0.58–0.95]. Increased precipitation and wind speed significantly decreased the RR of AOE-related EVs four and seven days after occurrence. After one day, low atmospheric pressure events showed an increased RR of 1.42 [1.02–1.98] in AOE-related EVs. ConclusionsExtreme weather events significantly impact AOE-related EVs. While high mean temperatures were positively correlated with AOE-related EVs, low humidity was found to have a negative same-day effect, supporting the idea of multiple factors being involved in increasing the susceptibility for AOE. Knowledge of the pattern of events could allow the implementation of time-optimized prevention strategies to reduce the incidence of AOE, the frequency of EVs, and the burden on health care systems.

A Novel Approach for Crop Selection and Water Management using Mamdani’s Fuzzy Inference &amp; IOT

In the modern world, technology is always evolving to replace more human labour with artificial intelligence. Moreover, farmers are under constant pressure to irrigate their farms at regular intervals without even a rudimentary grasp of the rainfall pattern and soil humidity, since it is extremely difficult to cultivate any agricultural food in regions with irregular rainfall patterns and high mean temperatures.&#x0D; This paper proposes a crop predictor and smart irrigation system using Mamdani’s fuzzy inference and IoT. The system aims to optimize water usage and crop yield by considering various factors such as soil moisture, temperature, humidity, rainfall, crop type and season. The system consists of three modules: a crop predictor module that uses fuzzy logic to suggest the best crop for a given location and season, an IOT module that collects and transmits the environmental data from sensors to a cloud server, and a smart irrigation module that uses fuzzy logic to control the water flow to the crops based on the data and the crop predictor module. The system is implemented and tested on a NodeMCU and MATLAB platform and shows promising results in terms of water conservation and crop productivity.

Comparison of Enamel Surface Integrity after De-Bracketing as Affected by Seven Different Orthodontic Residual Cement Removal Systems.

This study used seven different adhesive removal systems to evaluate and compare enamel surface integrity, heat generation, and time consumed during residual cement removal after de-bracketing. The sample size was 140 human premolars. Teeth were cleaned, mounted, and prepared for orthodontic bracket bonding. Brackets were then debonded using bracket-removing pliers. Teeth were randomly assigned to seven groups based on the residual cement removal system: Group 1: Stainbuster bur, Group 2: Renew diamond bur #129, Group 3: Renew carbide bur, Group 4: OneGloss Complete system, Group 5: Sof-Lex system, Group 6: Enhance Finishing and PoGo Polishing complete kit, and Group 7: Renew friction grip points. The enamel surface was evaluated for roughness before bracketing and after residual cement removal using surface profilometry. The time taken for cement removal was recorded using a digital timer, and heat generation was measured using a laser thermometer before and after cement removal. One-way ANOVA compared the pre- and post-values for enamel surface roughness, temperature, and time consumed. When comparing the difference between the post- and pre-finishing roughness using one-way ANOVA, the Renew diamond bur produced the roughest enamel surface post-removal with a mean of 4.716 μm, while the Sof-Lex recorded the lowest at 0.760 μm. The highest mean temperature was recorded with the Stainbuster bur at 5.545 °C, and the lowest temperature was recorded with the Enhance bur at 2.260 °C. The time for cement removal was the shortest with the Enhance bur at 12.2 s, whereas the time was the longest with the Renew diamond bur at 30.4 s. In conclusion, all the residual cement removal systems used in this clinically simulated study were not able to restore the original enamel surface smoothness. However, the 3M Sof-Lex produced the lowest enamel roughness but with more time consumption and heat generation. When selecting the best residual cement removal system to be used, clinicians should weigh the merits and demerits of each system based on the clinical judgement of the operator.