High Density Research Articles

Superionic iron hydride shapes ultralow-velocity zones at Earth’s core–mantle boundary

Seismological studies have exposed numerous ultralow velocity zones (ULVZs) exhibiting extraordinary physical attributes at Earth's core-mantle boundary, yet their compositions and origins remain controversial. Water-iron reaction can generate unique phases under lowermost-mantle conditions and likely plays a crucial role in forming ULVZs. Through first-principles molecular dynamic simulations with machine learning techniques, we determine that iron hydride, the product of water-iron reaction, is stable as a superionic phase at the core-mantle boundary. This superionic iron hydride has much slower velocities and a higher density than the ambient mantle under lowermost-mantle conditions. Accumulation of iron hydride, created through either a chemical reaction between subducted water and iron or solidification of core material entrained in the lower mantle by convection, can explain the seismic observations of ULVZs particularly those associated with subduction. This work suggests that water may have a substantial role in creating seismic heterogeneities at the core-mantle boundary.

Balancing Yield and Environmental Impact: Nitrogen Management and Planting Density for Rice in Southwest China

With growing concerns about global warming, it is crucial to adopt agronomic practices that enhance rice yields from paddy fields while reducing greenhouse gas (GHG) emissions for sustainable agriculture. An optimal nitrogen (N) fertilization rate and planting density are vital to ensure high rice yields, minimize GHG emissions, and understand emission behavior for better field management. We hypothesized that optimizing N application rates and planting density to improve nitrogen use efficiency (NUE) in rice cultivation would reduce resource losses and GHG emissions. To test this hypothesis, we implemented five treatments with a rice straw return cultural system: two planting densities (16 hills m−2 (traditional density, D1) and 20 hills m−2 (25% higher density, D2)) and three N application rates (no N fertilizer (N0), 180 kg N ha−1 (N1), and 144 kg N ha−1 (N2)). The control treatment (CK) was traditional planting density with no N fertilizer. The four new cropping modes were N1D1, N1D2, N2D1, and N2D2. We investigated the effects of N application rates and planting density on rice grain yield, NUE, and GHG emissions in multiple rice-growing seasons. The N1D2 treatment exhibited the highest grain yield over the three years, with a value of 10,452 kg ha−1, representing an increase of 12.2% compared to CK. Moreover, N uptake in N1D2 was the highest, averaging 39.2% (p < 0.05) higher than CK, and 8.5%, 3.5%, and 2.8% (p < 0.05) higher than N1D1, N2D1 and N2D2, respectively. N2D2 exhibited the highest NUE, with a value of 58.99 kg kg−1, surpassing all other treatments over the three years. GHG emissions, global warming potential (GWP), and greenhouse gas intensity (GHGI) in N2D2 were lower than in N1D1, N1D2, and N2D1. Additionally, reducing N application (comparing N1D1 to N2D1) and increasing plant density (comparing N1D1 to N1D2) improved N agronomic efficiency (NAE) and N partial productivity (PFPN). The negative correlation between the NAE and PFPN with GWP and GHG emissions further supports the potential for optimized N management and denser planting density to reduce environmental impact. These findings have important implications for sustainable rice cultivation practices in Southwest China and similar agroecosystems, emphasizing the need for integrated nutrient management strategies to achieve food security and climate change mitigation goals.

A novel macroporous carboxymethyl chitosan/sodium alginate sponge dressing capable of rapid hemostasis and drug delivery

Carboxymethyl chitosan (CMCS) and sodium alginate (SA), which are excellent polysaccharide-based hemostatic agents, are capable of forming polyelectrolyte complexes (PEC) through electrostatic interactions. However, CMCS/SA PEC sponges prepared by the conventional sol-gel process exhibited slow liquid absorption rate and poor mechanical properties post-swelling. In this work, a novel strategy involving freeze casting followed by acetic acid vapor treatment to induce electrostatic interactions was developed to fabricate novel PEC sponges with varying CMCS/SA mass ratios. Compared to sol-gel process sponge, the novel sponge exhibited a higher density of electrostatic interactions, resulting in denser pore walls that resist re-gelation and swelling according to FTIR, XRD, and SEM analyses. Additionally, the liquid absorption kinetics, as well as compression and tension tests, demonstrated that the novel sponge had significantly improved rapid blood absorption capacity and mechanical properties. Furthermore, in vitro coagulation and drug release studies showed that the novel sponge had a lower blood clotting index and clotting time, along with a slower drug release rate after loading with berberine hydrochloride, showcasing its potential as a rapid hemostatic dressing with controlled drug release capabilities.

Restructuring of Cu-based Catalysts during CO Electroreduction: Evidence for the Dominant Role of Surface Defects on the C2+ Product Selectivity.

CO is the key reaction intermediate in the Cu-catalyzed electroreduction of CO2 to products containing C-C bonds. Herein, we investigate the impact of the particle size of CuO precursors on the direct electroreduction of CO (CORR) to C2+ products. Flame spray pyrolysis was used to prepare CuO particles with sizes between 4 and 30 nm. In situ synchrotron wide-angle X-ray scattering (WAXS), quasi-in situ X-ray photoelectron spectroscopy, and transmission electron microscopy demonstrated that, during CORR, the CuO precursors transformed into ∼30 nm metallic Cu particles with a crystalline domain size of ∼17 nm, independently of the initial size of the CuO precursors. Despite their similar morphology, the samples presented different Faradaic efficiencies (FEs) to C2+ products. The Cu particles derived from medium-sized (10-20 nm) CuO precursors were the most selective to C2+ products (FE 60%), while those derived from CuO precursors smaller than 10 nm displayed a high FE to H2. As the oxidation state, the particle and the crystallite sizes of these samples were similar after CORR, the differences in product distribution are attributed to the type and density of surface defects on the metallic Cu particles, as supported by studying electrochemical oxidation of the reduced Cu particles during CV cycling in combination with synchrotron WAXS. Cu particles derived from <10 nm CuO contained a higher density of more under-coordinated defects, resulting in a higher FE to H2 than Cu particles derived from 10 to 30 nm CuO. Bulk oxidation was most prominent and stable for Cu particles derived from medium-sized CuO, which indicated the more disordered nature of their surface compared to Cu particles derived from 30 nm CuO precursors and their lower reactivity compared to Cu particles derived from small CuO. Cu particles derived from <10 nm CuO initially displayed intense redox behavior, quickly fading during subsequent CVs. Our results evidence the significant restructuring during the electrochemical reduction of CuO precursors into Cu particles of similar size. The differences in CORR performance of these Cu particles of similar size can be correlated to different surface structures, qualitatively resolved by studying surface and bulk oxidation, which affect the competition between CO dimerization to yield C2+ products and undesired H2 evolution.

Nitrate and nitrite reduction by adsorbed Fe(II) generated from ligand-promoted dissolution of biogenic iron minerals in groundwater

Chemical denitrification by redox-active Fe(II) species is pivotal in the coupled iron and nitrogen cycles. The reductive dissolution of ferric minerals by ligand can generate Fe(II)-ligand complexes, but their reducing capability for electrophilic pollutants like nitrate and nitrite remains uncertain. Here, biogenic secondary iron minerals (SIM) after dissimilatory iron reduction were reductively dissolved by oxalate and the siderophore desferrioxamine B, and subsequently the partially-dissolved SIM (SIMD) effectively removed NO2− from groundwater via reduction, while exhibiting much lower reactivity towards NO3−. The dissolution and removal processes were well-fitted with the Kabai model and the pseudo-second-order adsorption model, respectively. The equilibrium NO2− removal capacity (qe) of SIMD reached 0.146–0.223 mmol/g, accompanied with the rate constants as 0.433–0.810 g/(mmol·h). The emission of N2O and NO verified the occurrence of chemical denitrification during NO2− removal by SIMD. From the perspective of Fe(II) reactivity, SIMD exhibited higher densities of surface Fe(II) and more negative Eh values than SIM, and these two indicators showed linear correlations with the removal rates. Combined with microscopic, electrochemical and spectral analysis, our results indicated the redox reaction of adsorbed Fe(II)-complexes with NO2− on SIMD surface. The concurrent substance biochar was also considered, as it indirectly influenced dissolution and pollutant removal by shifting the iron mineral phase in SIM from magnetite to goethite. These findings highlight the significant role of reductive dissolution of iron mineral in N transformation, expand the electron pool available to support chemical denitrification, and have implications for Fe and N cycling coupling with pollutant reduction.

Toripalimab plus chemotherapy and radiotherapy for treatment-naive advanced esophageal squamous cell carcinoma: a single-arm phase 2 trial

This single-arm phase 2 trial (ChiCTR2100046715) examined previously untreated patients with advanced esophageal squamous cell carcinoma (ESCC) who received four cycles of paclitaxel with carboplatin every 3 weeks. Toripalimab was infused intravenously every 3 weeks for 12 months, or until disease progression or intolerable toxicity. Radiotherapy that encompassed the primary lesions and metastases commenced in the third cycle. The median progression-free survival time was 9.8 months (95% confidence interval [CI]: 6.8–not estimable) in the intent-to-treat population, failing to meet the pre-specified primary endpoints. Secondary endpoints included an objective response rate of 45.5%, a disease control rate of 57.6%, and a median duration of response of 11.5 months (interquartile range, 6.4–15.0). The 1-year progression-free survival and overall survival rates were 41.9% (95% CI: 27.7–63.5) and 69.7% (95% CI: 55.7–87.3), respectively. Lymphopenia was the most frequent grade ≥3 adverse event (82%), and an esophageal fistula developed in three patients (9.1%). No treatment-related deaths occurred. In prespecified exploratory biomarker analysis, higher densities of CD8 + T cells, CD11c+ dendritic cells, and CD68+ macrophages correlated with improved tumor response and prognosis. Radiotherapy supplementation to first-line chemo-immunotherapy for treatment-naive advanced ESCC demonstrated some antitumor activity and manageable safety profiles, warranting further randomized controlled trials.

Mn-controlled martensitic variant selection significantly affects the strength and toughness of 2.3 GPa ultra-high strength spring steel

In this study, the microstructure and mechanical properties of 55SiCrVNb ultra-high strength spring steel with 0.7 and 1.5 wt.% Mn were systematically investigated. The results show that 0.7Mn steel exhibited higher strength and toughness. The morphology and content of retained austenite, content of element in solid solution and the type and quantity of precipitates were basically the same in 0.7Mn and 1.5Mn steels. Hence, the variant reconstruction, as a unique perspective, was used to unravel the strengthening and toughening mechanisms governing the evolution of variants across varying Mn contents. Compared with the 1.5Mn steel, the decrease in Mn content deteriorated the variant selectivity (decreased variant frequency over 50 %), which led to a more uniform distribution of close-packed plane (CP) and Bain groups in 0.7Mn steel, thus refining the block size and improving the grain refinement strengthening (σp). The 0.7Mn steel with a higher density of high angle grain boundaries (HAGBs) effectively constrained dislocation slip, thereby enhancing dislocation strengthening (σd). As the Mn content decreased, the block size decreased from 0.24 to 0.14 μm, and the contribution of σp and σd increased by about 107 and 96 MPa, thus improving the yield strength. In addition, the increased HAGBs, which were dominated by the highly selective V1/V2, V1/V3(V5) and V1/V6 variant pairs, and the uniform CP and Bain group also contributed to inhibiting crack deflection and enhancing the impact toughness. Moreover, the higher Schmid factor with high geometrically necessary dislocation of 0.7Mn steel improved the deformation resistance of variants and strength. This work provided a new mechanism of strengthening and toughening dominated by variants.

In vivo optimization of the experimental conditions for the non-invasive optical assessment of breast density

In this study, time domain diffuse optical spectroscopy is performed in the range 600–1100 nm on 11 healthy volunteers with a portable system for the quantitative characterization of breast tissue in terms of optical properties and optically-derived blood parameters, tissue constituent concentrations, and scattering parameters. A measurement protocol involving different geometries (reflectance and transmittance), subject’s positions (sitting and lying down), probing locations (outer, lower, and inner breast quadrants), and source-detector distances (2 and 3 cm) allowed us to investigate the effect of tissue heterogeneity and different measurement configurations on the results with the aim of identifying the best experimental conditions for the estimate of breast density (i.e., amount of fibro-glandular tissue in the breast) as a strong independent risk factor for breast cancer. Transmittance results, that in previous studies correlated strongly with mammographic density, are used as a reference for the initial test of the simpler and more comfortable reflectance measurement configuration. The higher source-detector distance, which probes deeper tissue, retrieves optical outcomes in agreement with higher average density tissue. Similarly, results on the outer quadrants indicate higher density than internal quadrants. These findings are coherent with breast anatomy since the concentration of dense fibro-glandular stroma is higher in deep tissue and towards the external portion of the breast, where the mammary gland is located. The dataset generated with this laboratory campaign is used to device an optimal measurement protocol for a future clinical trial, where optical results will be correlated with conventional mammographic density, allowing us to identify a subset of wavelengths and measurement configurations for an effective estimate of breast density. The final objective is the design of a simplified, compact and cost-effective optical device for a non-invasive, routine assessment of density-associated breast cancer risk.

Impact of different housing densities combined with Environmental enrichment on the production of Japanese quail

This study evaluated the zootechnical performance, egg quality, and behavior of Japanese quails in the laying phase housed in cages of different densities and with or without environmental enrichment. A total of 224 quail were used and distributed into two groups: one with a housing density of 122.7 cm2 bird-1 and one with a housing density of 157.8 cm2 bird-1, each with and without environmental enrichment. The results showed that environmental enrichment did not influence the zootechnical performance parameters of the quail. However, housing density independently affected performance, except for egg mass and bird viability. A lower density (157.8 cm2 bird-1) resulted in greater specific egg weight, albumen percentage, and shell thickness. The interaction between density and environmental enrichment revealed that eggs from quail housed at higher density without enrichment had a greater yolk percentage, while quails housed at lower density without enrichment had a greater shell percentage. The tonic immobility time of the quails was not affected by treatment with different densities or environmental enrichment agents. It can be concluded that a lower housing density, with seven quail per cage (157.8 cm2 bird-1), regardless of environmental enrichment, provides better zootechnical performance and egg quality.

The Comprehensive Effects of Nano Additives on Biodiesel Engines—A Review

In modern society where fossil fuel prices are increasing and environmental issues are becoming more severe, biodiesel, as a new type of clean fuel, is receiving increasing attention. Biodiesel has the advantages of renewability, environmental friendliness, and good fuel properties, demonstrating broad application prospects. However, the use of biodiesel also faces some challenges, such as higher density and kinematic viscosity, lower calorific value, etc. The application of nanoparticles in biodiesel engines helps to achieve the goal of clean fuel. In terms of fuel characteristics, nanoparticles increase the calorific value, cetane value, and flash point of the fuel, improving combustion efficiency and safety, but increasing density may affect combustion. The use of nanoparticles can promote micro explosions and secondary atomization of fuel, improve combustion characteristics, and increase cylinder pressure, heat release rate, and brake thermal efficiency while reducing fuel consumption. Nanoparticles reduce HC and CO emissions, improve combustion through higher oxygen and reaction area, and reduce incomplete combustion products. On the contrary, nanoparticles also increase CO2 emissions because better combustion conditions promote oxidation reactions. For NOX emissions, some nanoparticles lower the combustion temperature to reduce emissions, while others increase emissions. Comparison shows that all nanoparticles offer varying degrees of improvement in engine performance and emissions, but the improvement provided by TiO2 nanoparticles is significantly better than that of other nanoparticles. In the future, the synergistic effect of multiple nanoparticles should be explored to further improve performance and reduce emissions, achieving effects that cannot be achieved by a single nanoparticle.

Optimizing the spatial immune landscape of CD103+CD8+ tissue-resident memory T cells in non-small cell lung cancer by neoadjuvant chemotherapy.

Neoadjuvant chemotherapy (NAC) combined with immunotherapy is increasingly used in non-small cell lung cancer (NSCLC). Tissue-resident memory T (TRM) cells are the primary subset responding to anti-cancer immunity. However, the immunomodulatory effects of NAC on TRM cells remain unknown. We established two NSCLC cohorts including patients undergoing upfront surgery (US) and NAC followed by surgery. Beyond the unpaired comparison between the US cohort (n = 122) and NAC cohort (n = 141) with resection samples, 58 matched pre-NAC biopsy samples were available for paired comparisons. Using multiplex immunofluorescence, we characterized TRM cells (CD103+CD8+) and four heterogeneous TRM subsets, including naive TRM1 (PD-1-Tim-3-), pre-exhausted TRM2 (PD-1+Tim-3-), TRM3 (PD-1-Tim-3+), and terminally exhausted TRM4 (PD-1+Tim-3+). Cell density, cytotoxicity, and two spatial features were defined to evaluate the effect of NAC on TRM subsets. The cell densities, infiltration scores, and cancer-cell proximity scores of TRM cells, especially TRM1&2 subsets, were significantly increased after NAC and associated with better prognosis of patients. In Contrast, no significant change was observed in the TRM4 subset, which was associated with poor prognosis. Besides, the cytotoxicity of TRM subsets was unaltered after NAC. Compared with patients without major pathologic response (MPRs), patients with MPR had higher densities of TRM1&2 subsets and higher cancer-cell proximity scores of TRM2&3 subsets. Furthermore, increased density of CD31 + cancer microvessels was positively associated with both TRM and Tnon-RM cells after NAC. NAC may remodel the cell density and spatial distribution of TRM subsets, which is associated with favorable therapeutic effect and prognosis in patients with NSCLC.

Origin of granular axial segregation bands in a rotating tumbler: An interface-mixing driven Rayleigh-Taylor instability

The origin of large and small particle axial bands in long rotating tumblers is a long-standing question. Using DEM simulations, we show that this axial segregation is due to a Rayleigh-Taylor instability which is characterized by the fact that the density of a granular medium increases with mixing and decreases with segregation. For initially mixed particles, segregation and collisional diffusion in the flowing layer balance and lead to a three-layer system, with a layer of large particles over a layer of small particles, and, interposed between these layers, a layer of more densely packed mixed particles. The higher density mixed particle layer over the lower density small particle layer induces a Rayleigh-Taylor instability, evident as waviness in the interface between the layers. The waviness destabilizes into ascending plumes of small particles and descending plumes of mixed particles with large particles enriched near the surface, which become evident as small and large particle bands visible at the free surface. Rolls driven by segregation at the tilted interface between plumes maintain the pattern of frozen plumes. Published by the American Physical Society 2024

Spatial and Socioeconomic Patterns of Mental Health and Healthcare Utilization in Cologne, Germany.

Children and adolescents are significantly tied to their family's socioeconomic position and living environment. Neighbourhood and the living environment have been identified as potential risk factors for mental disorders in this age group. The aim of the study was to investigate the distribution of mental and behavioural disorders (prevalence) and the provision of mental health services for children and adolescents aged 0-19 years in the city of Cologne. In particular, the study aimed to examine the association of these factors with area deprivation and the availability of mental health services covered by statutory health insurance. Finally, possible spatial variations in these aspects were analysed. Claims data of children and adolescents aged 0 to 19 years included in four statutory health insurance of the year 2021 were analysed. A deprivation index using data on the level of the ZIP code area was calculated. Analyses were carried out descriptively, using ordinary least squares (OLS) and geographically weighted regression (GWR). The prevalence of mental and behavioural disorders in children and adolescents varied across ZIP code areas, with higher rates in the northern, southern, and eastern parts of the city. The results indicated that the use of services by male children and adolescents with a prevalent diagnosis of mental and behavioural disorders was higher in areas with a higher density of healthcare providers. However, prevalence was on the whole lower in areas with a higher density of healthcare providers. In addition, the density of health care providers was higher in the city centre with comparatively lower deprivation. These results indicate inadequate access to care for children and young people outside the city centre. However, due to the heterogeneity of the population in these areas, this study provides only preliminary insights. Data with a finer geographic resolution are needed for further research in order to analyse the association further.

Remote vapor-phase dual alkali halide salts assisted quasi-van der Waals epitaxy of m-phase ZrO2 thin films with high dielectric constant and stable flexible properties

High-κ dielectric constant and wideband gap of ZrO2 material render it as an excellent candidate for transistor gate dielectric layers. However, current reported synthesis techniques suffer the problems of high precursor volatilization rate, ultrasmall grains with low dielectric constant, and high leakage current, which largely impede its application in electronic devices. Here, the quasi-van der Waals epitaxy growth of compact m-phase ZrO2 thin films has been developed, in which the stable supply of Zr source is realized by the tuned sublimation of ZrC powder with remote vapor-phase dual halide salts assistant. The formation of m-phase ZrO2 is due to the lower Gibbs free energy, in which the crystal nucleates at the etched hole edges of mica substrate, thus forming hexagonal shape polycrystal grains and merging as the continuous thin films. The microstructures and Raman spectrum characterization reveal the two dominated growth orientations and good crystal qualities, which indicate the uniform dielectric constant. The excellent growth reproducibility could be easily adapted to thin metal substrates, such as tungsten, molybdenum, and stainless steel, where the adhesion strength is strong because of the higher density of interfacial chemical bonding. Meanwhile, the metal–insulator–metal flexible capacitors show the high dielectric constant of 23–26 and low leakage current density of 10−4 A/cm2 at large voltage and only exhibit the decreased capacitance density of 7% after several hundred bending cycles. Our work paves a way to achieve the high-quality dielectric thin films on various substrates by the unique chemical vapor deposition design strategy.

Experimental and numerical investigation on the combustion behavior of densified wood: Differences among wood species and impact of char oxidation

Densified wood (DW) is a novel structural material with promissing application potential in construction industry due to its excellent mechanical performance. However, it could also be a disastrous fuel contributing to the development of fires. This work experimentally and numerically investigated the combustion behavior of DW. The differences among wood species (fir, pine and oak) and their char oxidation impacts are emphasized. The experimental results indicate that DW has a 44.7 K lower pyrolysis peak temperature on average, a 32.2 % lower peak mass loss rate, and a 8 % higher residual mass ratio than natural wood (NW) in N2 due to the delignification process. The hemicellulose and cellulose pyrolysis are endothermic in N2 but exothermic in air. Wood pyrolysis has an additional char oxidation reaction in air. The higher density of DW leads to longer times for ignition and flaming combustion. DW presents a higher heat release rate and average 4.7 MJ kg−1 higher effective heat of combustion of char. Two parallel pyrolysis reaction schemes based on ambiance are proposed, which well-predict the microscale characterizations but fail to represent the combustion behavior. An optimized mode was developed by adding a continuous char oxidation reaction to the N2 reaction scheme, which best predicts the combustion behaviors.

Retinal neuroanatomy of two emerging model organisms, the spiny mouse (Acomys dimidiatus) and the Mongolian gerbil (Meriones unguiculatus)

Current research using animal models to investigate retinal cell biology and model retinal degenerative diseases largely utilize small mammals that are nocturnal and lack the ability to restore lost vision. In contrast, the Mongolian gerbil (Meriones) is a diurnal rodent with good photopic vision, and the spiny mouse (Acomys) is a small desert-dwelling rodent with remarkable regenerative capabilities. The goal of this study was to identify antibodies that detect retinal cell classes in Meriones and Acomys, and to describe the retinal anatomy of these two species in comparison to outbred laboratory mice (Mus musculus). Immunohistochemistry was performed on retinal sections with antibodies for various retinal cell types. Sections were imaged by light, fluorescence, and confocal microscopy. Cell density, morphology, and placement were compared between species qualitatively and quantitatively. Our analyses revealed a classic assembly of retinal cells in Meriones and Acomys, with a few deviations compared to Mus. Meriones displayed the highest density of cones and Acomys the lowest. A higher density of bipolar cell bodies in the proximal portion of the inner nuclear layer was observed in both Acomys and Meriones compared to Mus, and both species exhibited an increase in amacrine cell density compared to Mus. Our results provide a foundation for future research into the visual system adaptations of these interesting species.

Potential exposure of honey bees to neonicotinoid seed treatments in US rice.

Neonicotinoid insecticide seed treatments are commonly used in rice (Oryza sativa) production to control rice water weevil (Lisorhoptrus oryzophilus). With the use of neonicotinoid seed treatments, there is potential that honey bees (Apis mellifera) could be exposed to neonicotinoids through translocation to the pollen. Studies were conducted in 2015 and 2016 to determine the level of neonicotinoids present in flag leaves, pollen, and grain of rice. Thiamethoxam was applied as a seed treatment and foliar prior to flooding. Clothianidin was applied as a seed treatment and as a foliar at a preflood and postflood timing. Subsamples of flag leaves, pollen, and grain were analyzed for positive neonicotinoid detections and abundance. Thiamethoxam was detected in 8.9% of samples and clothianidin was detected in 1.4% of samples. For both thiamethoxam and clothianidin, more positive samples were observed in flag leaf samples than in pollen or grain. An average of 4.30 ng/g of thiamethoxam was detected in flag leaves from seed-applied thiamethoxam. An average of 1.25 ng/g of clothianidin was found in flag leaves from a preflood application of clothianidin. A survey of honey bees present in rice fields was conducted in Mississippi and Arkansas to determine the abundance of honey bees present in rice fields based on the time of day. Honey bee densities were low in rice, with less than 5% and 3% positive detections observed in Mississippi and Arkansas, respectively. More positive detections and higher densities of honey bees were observed for mid-day sampling than for morning or evening sampling.

CFD modeling investigation of oxy-fuel combustion application in an industrial-scale FCC regenerator

The increase in atmospheric CO2 concentration and its consequential impact on climate change have elicited increased public concern. The refinery units including fluid catalytic cracking (FCC) generate substantial quantities of CO2. To mitigate the emission from the FCC process, oxy-fuel combustion has emerged as a prospective carbon capture and storage technology. This study presents the first trial for the modeling investigation of a 70 kt/a industrial FCC regenerator under the scenario of retrofitting it with oxy-fuel combustion technology. Employing the Eulerian-Eulerian model, a CFD model integrating heat transfer and coke combustion reactions has been established. The detailed hydrodynamics, temperature, and species concentration distribution inside the regenerator are obtained under both air-firing and oxy-firing conditions, which are further compared to exploit the possibility of oxy-fuel combustion retrofitting. As has been found, decreases in gas temperature and carbon conversion rate were observed for 21 % O2/79 % CO2 atmosphere in comparison to the air reference case due to the differences in gas properties between N2 and CO2. This discrepancy resulted in a drop of 17 K in dilute phase temperature and 2 K in dense phase temperature. The bed density also exhibited a large with the oxy-firing conditions, with notable observations revealing a lower bed density below a height of 4.2 m, transitioning to a higher density above said height. Sensitivity analysis was also conducted for three principal operating parameters, including superficial gas velocity, oxygen partial pressure, and catalyst circulation rate. An increase of oxygen partial pressure to 27 % or a decrease of the catalyst circulation rate to 20.7 kg/s proved effective in achieving the same temperature profile and even a slightly better carbon conversion in comparison to air-firing regeneration.

Strategically designed metal-free deep-ultraviolet birefringent crystals with superior optical properties.

Finding new birefringent materials with deep-ultraviolet (DUV, λ < 200 nm) transparency is urgent, as current commercial materials cannot meet the rapidly growing demands in related application fields. Herein, three guanidinium-based compounds, C(NH2)3CH3SO3, β-C(NH2)3Cl, and γ-C(NH2)3Cl, all featuring [C(NH2)3·X]∞ (X = CH3SO3 and Cl) pseudo layers, were designed through structural motif tailoring. Theoretical calculations indicate that these metal-free compounds all possess broad bandgaps (6.49-6.71 eV, HSE06) and remarkable birefringence (cal. 0.166-0.211 @ 1064 nm). Centimeter-sized C(NH2)3CH3SO3 crystals have been grown using a feasible aqua-solution method. Subsequently, to further optimize the properties, β/γ-C(NH2)3Cl was remolded by further tailoring the [C(NH2)3]+ cationic unit and the acceptor Cl- anion, and then the fourth compound NH2COF was theoretically constructed. Interestingly, NH2COF exhibits the desired coexistence of a wider bandgap (7.87 eV, HSE06) and giant birefringence (cal. 0.241 @ 1064 nm) attributed to its higher density of well-aligned birefringence-active groups (BAGs). Furthermore, among these four designed compounds, C(NH2)3CH3SO3 has been experimentally synthesized and exhibits a short UV cutoff edge. Centimeter-sized crystals have been grown using a feasible aqueous solution method. This study provides an effective strategy to optimize the density of BAGs for large birefringence and offers valuable insights into the strategic design of metal-free DUV birefringent crystals.

Effect of crystallographic orientation on the deformation and mechanical behavior of CoCrFeNi in Berkovich nanoindentation

The hardness and plastic deformation behavior of single-phase concentrated solid solution alloy CoCrFeNi were studied for selected crystallographic orientations (⟨001⟩, ⟨011⟩ and ⟨111⟩) using Berkovich nanoindentation. The integration of transmission electron microscopy (TEM) and molecular dynamics (MD) simulations was carried out to elucidate comprehensively the distinction in the deformation mechanisms, the evolution of dislocation structures, and the pile-up of differently oriented CoCrFeNi alloys subjected to indentation by a Berkovich indenter. In MDs, a Berkovich indenter, meticulously crafted to replicate its real geometry, was effectively employed in investigating the nanoindentation. The ⟨001⟩-oriented CoCrFeNi exhibited the highest hardness and the lowest magnitude of pop-in events, followed by the ⟨011⟩ and then the ⟨111⟩ orientations. The pile-up behavior was strongly dependent on the crystallographic orientation and occurred by three sequential processes. The deformation twinning was activated only in the ⟨001⟩ orientation and inclined toward the center direction of the indent due to the force inclining toward the radial direction of the indent. The clear manifestation of the evolution of dislocations in the three orientations during indentation was elucidated. More SFTs or Stair-rods were observed in the ⟨001⟩ orientation, attributable to the intensified reaction of Shockley partials stemming from its higher density of Shockley partials, followed by the ⟨011⟩ and then the ⟨111⟩ orientations. The anisotropic nanoindentation-hardness was correlated with the microstructures. The highest hardness and lowest magnitude of pop-in events of the ⟨001⟩ orientation could be ascribed to its intense dislocation interactions, high-density SFTs and the formation of twins. In the ⟨111⟩ orientation, the three-fold symmetry emission of prismatic dislocation loops along the three slip directions not parallel to the surface leaded to a weak interaction between dislocations, and then resulted in the lowest hardness. This research may be helpful to enhance our comprehension of the intricate mechanical behaviors exhibited by different oriented FCC high entropy alloys under Berkovich indentation.