Higher Coordination Number Research Articles

Synergistic Dual-Cross-Linking Gelation: Exploring the Impact of Metal-Ligand Complexation on Ionogel Performance.

Owing to the growing interest in wearable ionotronics, the demand for ionogels with outstanding mechanical and electrochemical characteristics has increased dramatically. Nevertheless, it remains challenging to simultaneously enhance the mechanical robustness and conductivity of ionogels because of their trade-off relationship. In this work, we propose physically/chemically dual-cross-linked ionogels designed to improve the mechanical strength without reducing ionic conductivity by introducing metal-ligand complexation only within the physically cross-linked domains. In particular, the impact of metal-ligand complexation, a crucial parameter in this strategy, on ionogel performance is systematically examined using various metal ions. The mechanical resilience and thermal stability of ionogels are effectively enhanced with Co3+ having the highest coordination number, which can be explained by the highest metal-ligand complexation (i.e., chemical cross-linking) density. Additionally, there is no degradation in ionic conductivity when compared to the pristine ionogel because these complexations occur within physically cross-linking domains that are irrelevant to the ion conductive channels. The dual-cross-linked ionogels are successfully applied to alternating-current electroluminescent displays (ACEDs). Moreover, a versatile mixed-emitter strategy is suggested to improve practicality, enabling the realization of frequency-controlled multicolor ACEDs.

Growth mechanism, stability and electronic structures of Sn doped Cu clusters

Recently, the single-Sn-atom-doped Cu of Cu20Sn1 is reported (ACS Catal. 2021, 11, 11103−11108), which is selective to CO with a maximum faradic efficiency. However, the structure evolutions and electronic properties of Sn doped Cu clusters are not well established. Here, the growth patterns, stability and electronic structures of SnCun (n = 1-9) clusters are first analysed in detail. It is found that the structural transitions of them are found to occur at the SnCu3 and SnCu7, respectively, where the Sn atoms trend to stabilise at the vertex sites with high-coordination numbers. Among them, the tetragonal pyramidal SnCu4 has a higher stability than that of its neighbours and can maintain the structural integrity at 700 K. The molecular orbitals and density of states reveal that the SnCu4 has a 1S21P6 superatomic electronic shell, which is further confirmed by the density of states analysis. The electrostatic potential surfaces confirmed that the SnCun have significant σ-hole regions at the Cu atomic sites, except for SnCu and SnCu2. The charge analyses show that the direction of charge flows is from the Cun frameworks → Sn.

Low-dose neutron irradiation effects on the elastoplastic deformation mechanisms of aluminum-doped gallium nitride under contact loading

The elastoplastic deformation mechanisms of irradiated aluminum (Al)-doped gallium nitride (GaN) under contact loading are investigated in this work using the nanoindentation simulations, which is of great significance for understanding the mechanical properties of the Al-doped GaN and guiding the design of durable and high-performance GaN-based devices. The mechanical behaviors of the Al-doped GaN with different doping concentrations are analyzed, including the indentation hardness, Young's modulus, elastic recovery rates, phase transformations, and stress distribution. It is found that Al doping increases their hardness, Young's modulus, and elastic recovery rates, and leads to an enlargement of the phase transformation regions, which is dominated by the high coordination number (CN) phase transformations. Furthermore, the effects of low-dose neutron irradiation on their elastoplastic deformation mechanisms are studied by triggering cascade collisions within the structure. When subjected to such irradiation, structural changes occur in the Al-doped GaN, their indentation hardness, Young's modulus, and elastic recovery rates increase remarkably, and its phase transformation mechanism is changed remarkably. The dislocation behaviors of the doped and undoped GaN are different under neutron irradiation. This study is important for capturing the mechanical stability and integrity of Al-doped GaN in an irradiation environment, as well as developing GaN-based devices with superior irradiation resistance.

Lanthanide Atoms Induce Strong Graphene Sheet Distortion When Adsorbed on Stone-Wales Defects.

Local curvature in graphene can enhance its reactivity and catalytic activity and can be induced by the adsorption of certain chemical species. By employing periodic density functional theory (DFT) calculations, we demonstrate that significant local curvature can be systematically observed when lanthanide atoms (the full series from La to Lu) are adsorbed on the Stone-Wales (SW) defect in graphene, contrary to that in defect-free graphene. Despite the typical high coordination numbers of lanthanide species, their hapticity is always η2 (and not η5, η6, or η7), where Ln atoms are adsorbed on the (7,7) junction, forming relatively short Ln···C separations. Contrary to the pristine graphene, the SW region undergoes considerable distortion and results in much stronger Ln bonding. The positive charge acquired by Ln atoms upon adsorption on SW is approximately 1.5 times larger than that on defect-free graphene. The high visibility of electron-rich lanthanide species in scanning tunneling microscopy images provides a means to locate SW defects in graphene samples experimentally.

Molecular dynamics simulation of the influence of nanocutting parameters on microstructure of AISI M2

Molecular dynamics simulation has become the main analysis method of ultra precision machining of various materials. In this research, molecular dynamics method was used to explore the influence of nanocutting parameters on amorphous atoms, atomic coordination numbers, atomic strain and dislocations of AISI M2 workpiece. LAMMPS was used to construct the molecular dynamics model for CBN tool cutting AISI M2. The polycrystalline model of the workpiece contained 12 grains and iron, chromium and tungsten atoms. The polycrystalline model of the tool contained 3 grains and boron and nitrogen atoms. Tersoff, EAM, Morse and L-J potential energy functions were used to characterize the interaction between atoms. The following results were obtained through 8 groups of simulation experiments: (1) Both cutting speed and cutting depth promoted the amorphous transformation of workpiece atoms. (2) Under the extrusion of the tool, atoms with high coordination numbers were produced in the contact area between the tool and the workpiece. (3) The cutting depth was positively correlated with the average strain of workpiece atoms. Large strain atoms mainly occurred in the cutting area and gradually extended into the workpiece. (4) 1/2 < 111> dislocation was the most common dislocation form in nanocutting. This research plays a rich role in molecular dynamics simulation of nanocutting polycrystalline alloys.

The electric double layer structure and interface energy of uranium electrode in molten LiCl-KCl-UCl3 mixture: A molecular dynamics simulation study

The electric double layer structure and interface energy of uranium electrode in molten LiCl-KCl-UCl3 mixture, as well as the surface energies of metallic uranium and molten salts, were investigated using molecular dynamics simulations. The surface energies were calculated, respectively, from the pressure tensor and the energy difference for molten salt and uranium, and interface energy was evaluated from the Gibbs free energy difference between systems with and without interface. The surface energies of molten alkali halides are between 76.4 and 201.8 mJ·m−2 and decrease with the increase of radius of the halide anion or the alkali cation for molten salt with the same alkali cation or the same halide anion. The surface energy of uranium depends on the allotrope morphology and crystal facet, and the surface energies of α-U, β-U, and γ-U are 2.36, 1.45, and 1.69 J·m−2 in average for the seven low index crystal facets. The interface energy of uranium and molten LiCl-KCl-UCl3 mixture is about 2.71 J·m−2 and increases with the increase of charge density on the uranium slabs. The molten LiCl-KCl-UCl3 mixture in anodic zone has higher coordination number than that in cathodic zone but similar coordination distance.

Bridging micro nature with macro behaviors for granular thermal mechanics

The connection between micro-level characteristics and macroscopic properties in granular heat transfer and mechanics is fundamental and crucial. This study proposes a novel discrete element approach incorporating granular heat transfer, contact bonding, and granular stress tensor models to investigate the mechanical and thermal responses of continuum media composed of constituent spheres. Eight benchmark tests were devised to bridge the long-standing gap between micro and macro properties in granular materials. Through these tests, the numerical solutions obtained from discrete element modeling match well with existing analytical or finite element solutions derived from continuum-based theory. This validation underscores the rationality and reliability of the granular heat transfer model, contact bonding model, and granular stress tensor model. Moreover, the study highlights the consistency between continuum-based theory and discontinuum-based theory. A minor distinction between continuum-based models and discrete element models emerges near the boundaries due to variations in the specification of boundary conditions. This discrepancy can be clarified by Saint-Venant's Principle, thus validating the accuracy of the microscale heat transfer and mechanics theory for granular materials. Five mono-disperse packing structures, including simple cubic (SC), body-centered cubic (BCC), face-centered cubic (FCC), hexagonal close packing (HCP), and random packing (Random), were further analyzed to examine their influence on heat transfer performance. Numerical results reveal that higher coordination numbers and solid volume fractions correspond to higher apparent thermal conductivity of granular assemblies, thus elucidating the connection between micro packing configurations and macroscopic heat transfer properties. The apparent thermal conductivity for different crystal configurations follows the sequence: HCP ≒ FCC > BCC ≒ Random > SC. To improve the accuracy and physical relevance of the proposed model, the effect of particle contact area needs to be further incorporated into the granular heat transfer model.

Soft and diffusion-controlled Sr-MOF for efficient separation of H2O/D2O

Heavy water (D2O) electrolysis is the primary technology for D2 production, playing an irreplaceable role in fields such as nuclear fusion research and isotope tracing. However, the inherent similarity in chemical properties between H2O and D2O (with only a 1.4 °C difference in boiling points) poses significant challenges to their separation. Furthermore, the extremely low natural abundance of D2O (0.015 %) increases the difficulty and cost of separation, while traditional electrolysis and distillation techniques are highly energy intensive. Therefore, there is an urgent need to develop novel adsorbents for efficient and environmentally sustainable H2O/D2O separation. Herein, we used polydentate ligand 2, 5-dihydroxyterephthalic acid (DOBDC) and its derivatives 4,4́-(anthracene-9,10-diyl) bis (2-hydroxybenzoic acid (ABHB) as raw materials to prepare two novel high coordination Sr-MOFs namely IPE-1 and IPE-2, respectively. These MOFs were applied for efficient separation of H2O and D2O at room temperature. X-ray diffraction results reveal that one Sr atom in IPE-1 is coordinated with 9 oxygen atoms. This high coordination number results in the formation of ultra-small rectangular pores of approximately 2.5 Å. Adsorption isotherms of N2, CO2, H2O, and D2O indicate that the ultramicroporous structure of IPE-1 precludes efficient diffusion of CO2 and H2O molecules into the MOF channels. In contrast, the activated IPE-2 exhibits good CO2, H2O, and D2O uptake capacities of 3 mmol/g, 8.38 mmol/g, and 6.51 mmol/g at 298 K, respectively. The Qst values and Ksap values of H2O and D2O indicate that the adsorption rates of H2O were much higher than D2O under 0.2 < P/P0 < 0.7, with a calculated ratio of approximately 1.26. This study not only provides appealing MOFs materials for efficient H2O/D2O separation at room temperature but also provides a new avenue for preparing adsorbents with high stability and high separation performance.

Precursor Chemistry of Lead Bromide Perovskite Nanocrystals.

We investigate the early stages of cesium lead bromide perovskite formation through absorption spectroscopy of stopped-flow reactions, high-throughput mapping, and direct synthesis and titration of potential precursor species. Calorimetric and spectroscopic measurements of lead bromide complex titrations combined with theoretical calculations suggest that bromide complexes with higher coordination numbers than previously considered for nonpolar systems can better explain observed behaviors. Synthesis mapping of binary lead halides reveals multiple lead bromide species with absorption peaks higher than 300 nm, including a previously observed species with a peak at 313 nm and two species with peaks at 345 and 370 nm that also appear as reaction intermediates during the formation of lead bromide perovskites. Based on theoretical calculations of excitonic energies that match within 50 meV, we give a preliminary assignment of these species as two-dimensional magic-sized clusters with side lengths of 2, 3, and 4 unit cells. Kinetic measurements of the conversion of benzoyl bromide precursor are connected to stopped-flow measurements of product formation and demonstrate that the formation of complexes and magic-sized clusters (i.e., nucleation) is controlled by precursor decomposition, whereas the growth rate of 2D and 3D perovskites is significantly slower.

Surface‐Like Diffusion of Fast Ions in Framework Energy Materials for Li‐ and Na‐Ion Batteries

AbstractThe rate performance, power density, and energy efficiency of electrochemical devices are often limited by ionic conductivities in electrolyte and electrode materials. Framework Prussian blue analogs and dense niobium oxides have been identified as high‐rate electrodes for sodium‐ and lithium‐ion batteries, respectively, yet the origin of the extremely high solid‐state Na+/Li+ transport is not fully understood. Of critical importance is the fact that their ultra‐low activation energy and anomalous pre‐exponent factor cannot be satisfactorily rationalized from conventional theory of solid‐state diffusion in the crystal lattice. Here, assisted by density‐functional‐theory calculations, we argued that the true origin is a unique surface‐like diffusion mechanism of the intercalation ions. In a surface‐like migration event, a mobile ion moves along the channel wall via a low coordination number and low migration barrier experiencing minimal steric hindrance. It is similar to surface diffusion in the conventional picture and contrasts with lattice diffusion from one interstitial/vacancy site to another one with high coordination number, crowded saddle‐point geometry and high migration barrier. We found that the shifting from solid‐state lattice diffusion to surface‐like diffusion is determined by the size difference between the mobile ion and the diffusion channel, and a lowest migration energy barrier can be reached by mediating the channel size. The analogy to gas diffusion in molecular sieves shall be discussed. Additionally, the effects of defects and crystal water in Prussian blue analogs were also discussed for better understanding their rate performances in experimental scenarios.

Surface-Like Diffusion of Fast Ions in Framework Energy Materials for Li- and Na-Ion Batteries.

The rate performance, power density, and energy efficiency of electrochemical devices are often limited by ionic conductivities in electrolyte and electrode materials. Framework Prussian blue analogs and dense niobium oxides have been identified as high-rate electrodes for sodium- and lithium-ion batteries, respectively, yet the origin of the extremely high solid-state Na+/Li+ transport is not fully understood. Of critical importance is the fact that their ultra-low activation energy and anomalous pre-exponent factor cannot be satisfactorily rationalized from conventional theory of solid-state diffusion in the crystal lattice. Here, assisted by density-functional-theory calculations, we argued that the true origin is a unique surface-like diffusion mechanism of the intercalation ions. In a surface-like migration event, a mobile ion moves along the channel wall via a low coordination number and low migration barrier experiencing minimal steric hindrance. It is similar to surface diffusion in the conventional picture and contrasts with lattice diffusion from one interstitial/vacancy site to another one with high coordination number, crowded saddle-point geometry and high migration barrier. We found that the shifting from solid-state lattice diffusion to surface-like diffusion is determined by the size difference between the mobile ion and the diffusion channel, and a lowest migration energy barrier can be reached by mediating the channel size. The analogy to gas diffusion in molecular sieves shall be discussed. Additionally, the effects of defects and crystal water in Prussian blue analogs were also discussed for better understanding their rate performances in experimental scenarios.

Evaluation of Point Group Symmetry in Lanthanide(III) Complexes: A New Implementation of a Continuous Symmetry Operation Measure with Autonomous Assignment of the Principal Axis.

The structure of molecular systems dictates the physical properties, and symmetry is the determining factor for all electronic properties. This makes group theory a powerful tool in quantum mechanics to compute molecular properties. For inorganic compounds, the coordination geometry has been estimated as idealized polyhedra with high symmetry, which, through ligand field theory, provides predictive capabilities. However, real samples rarely have ideal symmetry, and although continuous shape measures (CShM) can be used to evaluate deviation from an ideal reference structure σideal, this often fails for lanthanide(III) complexes with high coordination numbers, no obvious choice of principal axes, and no obvious reference structure. In lanthanide complexes, the unique electronic structures and associated properties are intricately tied to the symmetry around the lanthanide center. Therefore, robust methodologies to evaluate and estimate point group symmetry are instrumental for building structure-property relationships. Here, we have demonstrated an algorithmic approach that orients a molecular structure Q in the best possible way to the symmetry axis of any given point group G and computes a deviation from the ideal symmetry σsym(G,Q). This approach does not compute the deviation from an ideal reference system, but the intrinsic deviation in the structure induced by symmetry operations. If the structure contains the symmetry operation, there is no deviation and σsym(G,Q) = 0. The σsym deviation is generated from all of the symmetry operation ÔS in a point group G using the most correct orientation of the sample structure in each group G. The best orientation is found by an algorithm that minimizes the orientation of the structure with respect to G. To demonstrate the methodology, we have investigated the structure and symmetry of 8- and 9-coordinated lanthanide(III) aqua complexes and correlated the luminescence from 3 europium(III) crystals to their actual symmetry. To document the methodology, the approach has been tested on 26 molecules with different symmetries. It was concluded that the method is robust and fully autonomous.

Blocking Interfacial Proton Transport via Self‐Assembled Monolayer for Hydrogen Evolution‐Free Zinc Batteries

AbstractAqueous Zn‐ion batteries (ZIBs) are promising next‐generation energy storage devices, yet suffer from the issues of hydrogen evolution reaction (HER) and intricate side reactions on the Zn anode surface. The hydrogen (H)‐bond networks play a critical role in interfacial proton transport that may closely relate to HER but are rarely investigated. Herein, we report a self‐assembled monolayer (SAM) strategy which is constructed by anchoring ionic liquid cations on Ti3C2Tx substrate for HER‐free Zn anode. Molecule dynamics simulations reveal that the rationally designed SAM with a high coordination number of water molecules (25–27, 4–6 for Zn2+) largely reduces the interfacial densities of H2O molecules, therefore breaking the connectivity of H‐bond networks and blocking proton transport on the interface, by which the HER is suppressed. Then, a series of in situ characterizations demonstrate that negligible amounts of H2 gas are collected from the Zn@SAM‐MXene anode. Consequently, the symmetric cell enables a long‐cycling life of 3000 h at 1 mA cm−2 and 1000 h at 5 mA cm−2. More significantly, the stable Zn@SAM‐MXene films are successfully used for coin full cells showing high‐capacity retention of over 94 % after 1000 cycles and large‐area (10×5 cm2) pouch cells with desired performance.

Blocking Interfacial Proton Transport via Self-Assembled Monolayer for Hydrogen Evolution-Free Zinc Batteries.

Aqueous Zn-ion batteries (ZIBs) are promising next-generation energy storage devices, yet suffer from the issues of hydrogen evolution reaction (HER) and intricate side reactions on the Zn anode surface. The hydrogen (H)-bond networks play a critical role in interfacial proton transport that may closely relate to HER but are rarely investigated. Herein, we report a self-assembled monolayer (SAM) strategy which is constructed by anchoring ionic liquid cations on Ti3C2Tx substrate for HER-free Zn anode. Molecule dynamics simulations reveal that the rationally designed SAM with a high coordination number of water molecules (25-27, 4-6 for Zn2+) largely reduces the interfacial densities of H2O molecules, therefore breaking the connectivity of H-bond networks and blocking proton transport on the interface, by which the HER is suppressed. Then, a series of in situ characterizations demonstrate that negligible amounts of H2 gas are collected from the Zn@SAM-MXene anode. Consequently, the symmetric cell enables a long-cycling life of 3000 h at 1 mA cm-2 and 1000 h at 5 mA cm-2. More significantly, the stable Zn@SAM-MXene films are successfully used for coin full cells showing high-capacity retention of over 94 % after 1000 cycles and large-area (10×5 cm2) pouch cells with desired performance.

Amine Functionalization of Channels of Metal-Organic Frameworks for Effective Chemical Fixation of Carbon Dioxide: A Comparative Study with Three Newly Designed Porous Networks.

Catalytic transformation of CO2 into value-added chemical products can provide an appropriate solution for the raising environmental issues. To date, various metal-organic frameworks (MOFs) with transition metal ions have been explored for CO2 capture and conversion, but alkaline earth metal-based MOFs are comparatively less studied. Metal ions like Sr(II) having relatively large radius give rise to a high coordination number resulting in higher stability of the MOFs. Moreover, the introduction of N-rich functional group in organic linker like -NH2, -CONH- and triazole into MOF backbone enhance their CO2 capture and conversion efficiency. Herein, the effect of amine group on the catalytic efficiency of MOFs for CO2 cycloaddition with epoxides under solvent free and ambient conditions are presented. The di-carboxylates, such as 5-aminoisophthalate (AmIP) and 5-bromoisophthalate (BrIP) were utilized to synthesize Sr(II) based MOFs. The Zn(II) MOF was synthesized using tetra-carboxylate containing amide spacer (OAT) and 4-amino-4H-1,2,4-triazole (AMT). All three MOFs exhibited porous networks with guest available volume ranging from 15 to 58 %. The catalytic efficiency of the MOFs towards carbon dioxide fixation reaction was explored. The catalytic performances revealed that the presence of amine group in the channels enhances the catalytic efficiency of the MOFs.

Effect of solid bitumen on pore structure of ultra-deep carbonate reservoir and its logging calculation method

An amount of highly evolved bitumen has been discovered in carbonate reservoirs during ultra-deep oil and gas exploration. This bitumen damages the pore structure and is difficult to dissolve using chemical reagents. To address the gap in studying highly evolved bitumen’s impact on carbonate reservoirs. This study utilized samples from the second member of the Dengying Formation (referred to as Deng 2) in Sichuan Basin. Using thin-section observation, and full-diameter CT scanning, were employed to establish two digital models: with bitumen and without. The study aims to observe bitumen distribution characteristics, compare physical properties and pore structures of two digital cores, clarify bitumen content and its impact on the reservoir, and establish a regression equation. The results indicate: (1) Bitumen in Deng 2 exhibits three states: semi-filled, fully filled, and combined cementation; (2) Properties of the bitumen-containing model decline, with significant reductions in pore and throat numbers. Bitumen primarily occupies large-pore spaces with high coordination numbers and blocks large-radius, long-throat spaces; (3) A bitumen calculation model was established using digital core analysis and well logging parameters, demonstrating good applicability. In conclusion, this approach offers guidance for studying the impact of bitumen on ultra-deep reservoirs and quantitative well logging analysis.

Amorphous GaN: Polyamorphism and crystallization at high pressure

Employing constant pressure ab initio simulations, we have shed light on the previously unknown high-pressure behavior of amorphous gallium nitride. Our findings reveal a two-step transformation sequence under pressure. The initial transition involves a polyamorphic transformation from a low-density amorphous (LDA) phase to a high-density amorphous (HDA) phase with an average coordination number of 5.4. Upon pressure release, the HDA state partially reverts to a denser amorphous network with a higher coordination number (4.34) compared to the original LDA phase. Further pressurization triggers the crystallization of the HDA state into a rocksalt structure. Remarkably, the electronic structure of the amorphous forms of GaN exhibits insignificant sensitivity to changes in coordination number, maintaining a band gap of approximately 1.7–2.0 eV across all phases.

Pore throat distributions and movable fluid occurrences in different diagenetic facies of tight sandstone reservoirs in the Triassic Chang 6 reservoirs, Wuqi Area, Ordos Basin, China

The 6th member of the Triassic Yanchang Formation, hereafter referred to as Chang 6 reservoir, in the Wuqi area of the Ordos Basin presents formidable obstacles for efficient tight oil development. This reservoir is known for its tight lithology, strong heterogeneity, inadequate oil saturation, and abnormally low reservoir pressure, which collectively contribute to the highly differentiated mobility of tight oil within the formation. To overcome these challenges, a comprehensive understanding of the factors influencing oil mobility is essential. This study investigates the occurrence characteristics of movable fluids in different diagenetic facies and the corresponding influential factors by employing various microscopic experiments, including high-pressure mercury intrusion, constant-rate mercury intrusion, nuclear magnetic resonance test, scanning electron microscopy, pore-casted thin section analysis, and X-ray diffraction measurement. There is a weaker correlation between the pore-throat radius ratio and the movable fluid saturation in reservoirs of various diagenetic facies (R2 = 0.6104), whereas there is a stronger correlation between movable fluid saturation and throat radius (R2 = 0.9415). Among the seven types of diagenetic facies, chlorite membrane cementation-intergranular pore facies (Facies I) and chlorite and illite membrane cementation-intergranular pore facies (Facies II) have the best-developed throats and the highest coordination number. Illite cementation-intergranular pore facies (Facies III) and illite and chlorite membrane cementation-dissolution facies (Facies IV) demonstrate smaller pore-throat radii and moderate to poor reservoir connectivity. The other three facies, namely illite cementation-dissolution facies (Facies V), illite cementation facies (Facies VI), and carbonate tight cementation facies (Facies VII) exhibit underdeveloped pore structures and lower recovery rates. Pore-throat radius emerges as the principal factor influencing reservoir permeability and storage capacity. The distribution of favorable diagenetic facies is influenced by depositional environments, diagenetic processes, and microscopic pore-throat characteristics. This study significantly enhances our understanding of the differential occurrence characteristics of fluids in different diagenetic facies in the Chang 6 reservoir, providing valuable insights for future exploration and production endeavors aimed at optimizing oil recovery in tight sandstone reservoirs.

Highly Specific Sulfadiazine Detection Using a Two-Dimensional Europium-Organic Coordination Polymer.

Sulfadiazine (SFZ) is an inexpensive large-consumption antibiotic used for treat bacterial infections but an excess of residues in food can be harmful. Fast and specific luminescence detection of SFZ is highly challenging because of the interference of structurally similar antibiotics. In this work, we develop a two-dimensional europium-organic coordination polymer with excellent luminescence and water stability for highly specific detection of SFZ in the range of 0-0.2 mM. Structural analysis shows that the high stability of coordination polymer is due to the high coordination number of europium ion and the special chelating coordination structure of ligand. The experiment results revealed that the high selectivity and effectively luminescence quenched behaviour of coordination polymer toward SFZ is caused by highly efficient inner filter effect.

Constructing high coordination number of Ir-O-Ru bonds in IrRuOx nanomeshes for highly stable acidic oxygen evolution reaction

Constructing high coordination number of Ir-O-Ru bonds in IrRuOx nanomeshes for highly stable acidic oxygen evolution reaction