High Ammonia Concentrations Research Articles

Mechanisms of ammonium detoxification in submerged macrophytes under shade conditions

Excessive ammonium disrupts the biological and physical characteristics of aquatic freshwater ecosystems, causing nutrient imbalances and toxicity. Different macrophytes exhibit varying tolerance levels to ammonium stress, influenced by species-specific adaptations. However, eutrophic water bodies not only have high nutrient loads but also exhibit low light transparency, necessitating an understanding of how submerged macrophytes cope with both high ammonium concentrations and low light conditions. In this study, we explored the tolerance of submerged macrophytes under these challenging conditions by testing various ammonium concentrations and light intensities. Our findings reveal that Myriophyllum spicatum demonstrates high ammonium tolerance under both optimal and low light intensities. Specifically, under optimal light, the primary ammonium assimilation pathway is catalyzed by NADH-GDH (Nicotinamide Adenine Dinucleotide-dependent Glutamate Dehydrogenase), with its activity increasing 4-fold at 50 mg L−1 [NH4+-N] compared to the control. Conversely, under low light intensity, the GS (Glutamine Synthetase)-catalyzed pathway becomes predominant, with GS activity rising 3-fold at 50 mg L−1 [NH4+-N] compared to the control. These results provide new insights into the adaptive mechanisms of M. spicatum, highlighting its flexible strategies for ammonium assimilation and its potential application in water restoration efforts. This study offers valuable information on the enzymatic pathways involved in ammonium detoxification, which is essential for developing effective strategies to manage and restore eutrophic aquatic systems.

NH4Cl recovery from high-ammonia organic waste liquor by electrolysis with aluminum soluble anode

High-ammonia organic waste liquor is regarded as highly toxic and non-biodegradable due to containing high concentration of ammonia and organic refractory compounds. Treating high-ammonia organic waste liquor could be costly in the need of large energy or chemical agent input. Recovery of ammonium is an alternative way because high ammonium waste liquor could act as a reservoir of nitrogenous fertilizer. In this study, NH4Cl was separated from waste liquor by electrolysis with aluminum-soluble anode. The white foamy substances with NH4Cl purity over 90 % were produced at a current density of 12.5 mA/cm2 with 100 min electrocution. The white foamy substance production rate was increased as pH rose, and NH4Cl purity increased from 82.44 % at pH 4 to 91.34 % at pH 6. The soluble aluminum from anode sacrifice promoted crystallization and separation of NH4Cl by participating in the formation of CGAs (Colloidal Gas Aphrons) and improving their stability. Organic substances in the liquor functioned as surfactant to generate of CGAs, CGAs carried NH4Cl crystals floated to the surface and formed the white foamy substance. The study proposes an efficient, sustainable method for the hazardous high-ammonia organic waste liquor resource utilization.

Optimization of Ammonia Removal from Landfill Leachate by Aeration Using Response Surface Methodology (RSM)

Landfill leachate has a high concentration of ammonia, making it a harmful pollutant for both surface and groundwater. One of the most favoured methods for removing ammonia from leachate is aeration, as it has been proven to remove a significant amount of ammonia in the most efficient and economical way. The effect of operational variables on ammonia removal efficiency by aeration was investigated in the current study by applying Response Surface Methodology (RSM) approach. Three operating parameters such as airflow rate, aeration time and lime dosage were investigated to achieve the optimization of ammonia removal. The optimal parameters for a favourable reaction of ammonia-nitrogen (NH3N) removal were found to be 6 L/min airflow, 90 minutes aeration time, and a lime dosage of 6 g/L. At these ideal conditions, Quadratic RSM predicted a maximum NH3N removal of 98.0%, which has been validated by the experiment and successfully removed 97.6%. The finding also showed that airflow rate and aeration time were more significant than lime dosage for NH3N removal. Due to increased contact time between air and liquid, regardless of the amount of lime used, increasing the aeration period ammonia removal efficiency. Considering the influential factors, determining the optimum condition for ammonia removal by aeration will explain the potential interferences that may inhibit the efficient recovery of NH3N. Hence, aeration is a promising approach for ammonia removal from landfill leachate.

Optimization of Ammonia Removal from Landfill Leachate by Aeration Using Response Surface Methodology (RSM)

Landfill leachate has a high concentration of ammonia, making it a harmful pollutant for both surface and groundwater. One of the most favoured methods for removing ammonia from leachate is aeration, as it has been proven to remove a significant amount of ammonia in the most efficient and economical way. The effect of operational variables on ammonia removal efficiency by aeration was investigated in the current study by applying Response Surface Methodology (RSM) approach. Three operating parameters such as airflow rate, aeration time and lime dosage were investigated to achieve the optimization of ammonia removal. The optimal parameters for a favourable reaction of ammonia-nitrogen (NH3N) removal were found to be 6 L/min airflow, 90 minutes aeration time, and a lime dosage of 6 g/L. At these ideal conditions, Quadratic RSM predicted a maximum NH3N removal of 98.0%, which has been validated by the experiment and successfully removed 97.6%. The finding also showed that airflow rate and aeration time were more significant than lime dosage for NH3N removal. Due to increased contact time between air and liquid, regardless of the amount of lime used, increasing the aeration period ammonia removal efficiency. Considering the influential factors, determining the optimum condition for ammonia removal by aeration will explain the potential interferences that may inhibit the efficient recovery of NH3N. Hence, aeration is a promising approach for ammonia removal from landfill leachate.

Impact of additives on syntrophic propionate and acetate enrichments under high-ammonia conditions

High ammonia concentrations in anaerobic degradation systems cause volatile fatty acid accumulation and reduced methane yield, which often derive from restricted activity of syntrophic acid-oxidising bacteria and hydrogenotrophic methanogens. Inclusion of additives that facilitate the electron transfer or increase cell proximity of syntrophic species by flocculation can be a suitable strategy to counteract these problems, but its actual impact on syntrophic interactions has yet to be determined. In this study, microbial cultivation and molecular and microscopic analysis were performed to evaluate the impact of conductive (graphene, iron oxide) and non-conductive (zeolite) additives on the degradation rate of acetate and propionate to methane by highly enriched ammonia-tolerant syntrophic cultures derived from a biogas process. All additives had a low impact on the lag phase but resulted in a higher rate of acetate (except graphene) and propionate degradation. The syntrophic bacteria ‘Candidatus Syntrophopropionicum ammoniitolerans’, Syntrophaceticus schinkii and a novel hydrogenotrophic methanogen were found in higher relative abundance and higher gene copy numbers in flocculating communities than in planktonic communities in the cultures, indicating benefits to syntrophs of living in close proximity to their cooperating partner. Microscopy and element analysis showed precipitation of phosphates and biofilm formation in all batches except on the graphene batches, possibly enhancing the rate of acetate and propionate degradation. Overall, the concordance of responses observed in both acetate- and propionate-fed cultures highlight the suitability of the addition of iron oxide or zeolites to enhance acid conversion to methane in high-ammonia biogas processes.Key points• All additives promoted acetate (except graphene) and propionate degradation.• A preference for floc formation by ammonia-tolerant syntrophs was revealed.• Microbes colonised the surfaces of iron oxide and zeolite, but not graphene.Graphical

Genome assembly of redclaw crayfish (Cherax quadricarinatus) provides insights into its immune adaptation and hypoxia tolerance

BackgroundThe introduction of non-native species is a primary driver of biodiversity loss in freshwater ecosystems. The redclaw crayfish (Cherax quadricarinatus) is a freshwater species that exhibits tolerance to hypoxic stresses, fluctuating temperatures, high ammonia concentration. These hardy physiological characteristics make C. quadricarinatus a popular aquaculture species and a potential invasive species that can negatively impact tropical and subtropical ecosystems. Investigating the genomic basis of environmental tolerances and immune adaptation in C. quadricarinatus will facilitate the development of management strategies of this potential invasive species.ResultsWe constructed a chromosome-level genome of C. quadricarinatus by integrating Nanopore and PacBio techniques. Comparative genomic analysis suggested that transposable elements and tandem repeats drove genome size evolution in decapod crustaceans. The expansion of nine immune-related gene families contributed to the disease resistance of C. quadricarinatus. Three hypoxia-related genes (KDM3A, KDM5A, HMOX2) were identified as being subjected to positive selection in C. quadricarinatus. Additionally, in vivo analysis revealed that upregulating KDM5A was crucial for hypoxic response in C. quadricarinatus. Knockdown of KDM5A impaired hypoxia tolerance in this species.ConclusionsOur results provide the genomic basis for hypoxic tolerance and immune adaptation in C. quadricarinatus, facilitating the management of this potential invasive species. Additionally, in vivo analysis in C. quadricarinatus suggests that the role of KDM5A in the hypoxic response of animals is complex.

Evaluating Ammonia Toxicity and Growth Kinetics of Four Different Microalgae Species.

Although wastewater with high ammonia concentration is an ideal alternative environment for microalgae cultivation, high ammonia concentrations are toxic to microalgae and inhibit microalgae growth. In this study, the ammonia responses of four widely used microalgae species were investigated. Chlorella vulgaris, Chlorella minutissima, Chlamydomonas reinhardtii and Arthrospira platensis were grown in batch reactors maintained at seven different NH4Cl concentrations at a constant pH of 8. Growth and nitrogen removal kinetics were monitored. IC50 values for the mentioned species were found as 34.82 mg-FA/L, 30.17 mg-FA/L, 27.2 mg-FA/L and 44.44 mg-FA/L, respectively, while specific growth rates for different ammonia concentrations ranged between 0.148 and 1.271 d-1. C. vulgaris demonstrated the highest biomass growth under an ammonia concentration of 1700.95 mg/L. The highest removal of nitrogen was observed for A. platensis with an efficiency of 99.1%. The results showed that all tested species could grow without inhibition in ammonia levels comparable to those found in municipal wastewater. Furthermore, it has been concluded that species C. vulgaris and A. platensis can tolerate high ammonia levels similar to those found in high strength wastewaters.

Optimization of direct-injection ammonia-diesel dual-fuel combustion under low load and higher ammonia energy ratios

Ammonia (NH3), as a potential zero-carbon fuel, has garnered significant attention for its application in compression ignition (CI) engines. Due to the low reactivity, ammonia is primarily used as dual fuel in CI engines. Therefore, the decarbonization potential is influenced by the ammonia energy ratio (AER). In this study, experimental research was conducted on expanding the AER at low load conditions in a direct-injection ammonia-diesel dual-fuel engine. The ammonia post-injection strategy was explored and significantly improved the suppression effect of high-concentration ammonia on diesel ignition, which could advance ignition timing and increase the peak heat release rate. As a result, coupled with intake heating, it expanded AER to 86 % at an indicated mean effective pressure (IMEP) of 4 bar. This strategy also increased the indicated thermal efficiency (ITE) by 8 % and significantly reduced unburned ammonia emissions. However, the combustion and emission performance was limited by the post-injection ammonia quantity and the injection timing of both diesel and ammonia, especially under high AER conditions.

Summer scour syndrome in weaned dairy calves: case series

BackgroundSummer scour syndrome (SSS) is a recently identified pathological condition affecting weaned dairy and dairy-beef calves during their first grazing season in Ireland. The syndrome is characterised by diarrhoea, weight loss, weakness, and can ultimately lead to death in some calves. Oral and oesophageal ulcerations are present in some cases. This study aimed to characterise a series of SSS cases in weaned dairy-bred calves on Irish commercial farms.ResultsFive farms with calves having unexplained diarrhoea at grass were referred by private veterinary practitioners (PVP) following preliminary testing to exclude coccidiosis and parasitic gastroenteritis. Farms were visited within 2 to 5 days following PVP’s referrals, or 2 days to 3 weeks relative to the onset of clinical signs. Farm management data, grass and concentrate samples, and biological samples from 46 calves (8 to 10 calves/farm) displaying clinical signs were collected. Two farms were subsequently found positive for coccidiosis and/or had chronic pneumonia problems after a thorough herd investigation and were designated as non-case farms (NCF). The remaining three farms were deemed typical SSS outbreaks (case farms; CF). Mean rumen fluid pH per farm ranged from 6.67 to 7.09 on CF, and 6.43–6.88 on NCF. Mean rumen fluid ammonia concentrations ranged from 17.6 to 29.6 mg/L and 17.2–45.0 mg/L on CF and NCF, respectively. Corresponding blood ammonia concentrations ranged from 129 to 223 µmol/L and 22–25 µmol/L. Mean blood copper and molybdenum concentrations were within normal range on all farms. Grass crude protein concentrations on the paddocks where the calves had grazed, and were currently grazing on the day of visit ranged from 137 to 148 g/kg DM and 106–177 g/kg DM, respectively on CF, and 160–200 g/kg DM and 151–186 g/kg DM, respectively on NCF. On CF, inorganic nitrogen fertiliser was applied 1 to 3 weeks pre-grazing, whereas on the two NCF, inorganic nitrogen fertiliser was applied 2 to 3 weeks pre-grazing on one farm and no fertiliser was applied on the other.ConclusionThese findings suggest that copper or molybdenum toxicity, and ruminal acidosis are not the primary causes of SSS. High blood ammonia concentrations and the timing and level of inorganic nitrogen fertiliser application to paddocks pre-grazing, warrant further investigation.

Increasing urine nitrification performance with sequential membrane aerated biofilm reactors

This study aimed to investigate whether separating organics depletion from nitrification increases the overall performance of urine nitrification. Separate organics depletion was facilitated with membrane aerated biofilm reactors (MABRs). The high pH and ammonia concentration in stored urine inhibited nitrification in the first stage and therewith allowed the separation of organics depletion from nitrification. An organics removal of 70 % was achieved at organic loading rates in the influent of 3.7 gCOD d−1 m−2. Organics depletion in a continuous flow stirred tank reactor (CSTR) for organics depletion led to ammonia stripping through diffused aeration of up to 13 %. Using an MABR, diffusion into the lumen amounted for 4 % ammonia loss only. In the MABR, headspace volume and therefore ammonia loss through the headspace was negligible. By aerating the downstream MABR for nitrification with the off-gas of the MABR for organics depletion, 96 % of the ammonia stripped in the first stage could be recovered in the second stage, so that the overall ammonia loss was negligibly low. Nitrification of the organics-depleted urine was studied in MABRs, CSTRs, and sequencing batch reactors in fed batch mode (FBRs), the latter two operated with suspended biomass. The experiments demonstrated that upstream organics depletion can double the nitrification rate. In a laboratory-scale MABR, nitrification rates were recorded of up to 830 mgNL−1 d−1 (3.1 gN m−2 d−1) with ambient air and over 1500 mgNL−1 d−1 (6.7 gN m−2 d−1) with oxygen-enriched air. Experiments with a laboratory-scale MABR showed that increasing operational parameters such as pH, recirculation flow, scouring frequency, and oxygen content increased the nitrification rate. The nitrification in the MABR was robust even at high pH setpoints of 6.9 and was robust against process failures arising from operational mistakes. The hydraulic retention time (HRT) required for nitrification was only 1 to 2 days. With the preceding organics depletion, the HRT for our system requires 2 to 3 days in total, whereas a combined activated sludge system requires 4 to 8 days. The N2O concentration in the off-gas increases with increasing nitrification rates; however, the N2O emission factor was 2.8 % on average and independent of nitrification rates. These results indicate that the MABR technology has a high potential for efficient and robust production of ammonium nitrate from source-separated urine.

Analisis Penyisihan Kandungan Amonia dengan Stripper di Pabrik Ammonia

Ammonia industrial waste treatment is part of the final process in the industry. Wastewater containing high ammonia content needs to be treated using a stripping process. This study to analysis the stripping process for ammonia waste treatment in the industry to obtain appropriate operating conditions and meet the wastewater standards issued by the Minister of the Environment. Data obtained during 10 days of operation were compared with the standards and analyzed for column efficiency. The results of the analysis showed that the waste output with a concentration of 13.9 - 49 ppm, a pH range of 8.7 - 9 and most of the waste discharge had met the standards, namely a maximum of 50 ppm and pH 6-9. The best gas-liquid ratio at the stripper inlet is 0.25 V / V and pressure has no significant effect on stripper efficiency.

Reforming of ammonia and ammonia-air mixtures in a homogenous plasma reactor: Parametric study of hydrogen yields

Plasma-assisted reforming shows great promise for making ammonia compatible with current engine technology, with minimal modifications required. This study examines the impact of various discharge, flow, and composition parameters on ammonia conversion into hydrogen using a new well-stirred homogeneous plasma reactor. Gas chromatography was used to measure hydrogen and oxygen, while ICCD imaging evaluated plasma homogeneity. Initial mixture composition significantly influences the response to plasma conditions. Relative to the initial ammonia composition, the conversion of pure ammonia yields a lower hydrogen percentage when compared to air-diluted mixtures. Introducing air changes the relationship between pulsed energy deposition and hydrogen production, resulting in a more substantial increase in conversion. Efficiency calculations demonstrate that high ammonia content and high pulse frequencies improve yields, while longer residence times in the reactor result in higher temperatures, also increasing yields. These findings provide insights into the underlying mechanisms of ammonia cracking and reforming in a discharge, and will serve to promote further investigation into plasma reforming strategies.

Flexible gas-strain dual sensor based on PU-supported Ti3C2Tx/CeO2/TiO2 yarns

The generation of high levels of ammonia in industries, agricultural sectors, and water treatment plants has triggered the necessity to detect high ammonia concentrations in a flexible way to ensure proactive measures for protecting humans and the environment. Therefore, it is essential to develop highly sensitive multifunctional sensors that have long-term stability, high durability, and a large stretch range. In our work, a novel approach was developed for fabricating flexible sensors consisting of polyurethane (PU) yarn and the loaded Ti3C2Tx/CeO2/TiO2 (abbreviated as MTCe) nanocomposites. The structures and morphology of the yarn-shaped sensors were analysed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and other characterisation methods. In addition, gas and strain responses were recorded and analysed using an AES-4SD flexible electronic device. The response of the yarn-shaped sensors to 100 ppm NH3 was 42.9 % at room temperature (25 °C), indicating its excellent gas sensitivity. In addition, the sensors exhibited some key advantages, such as a large stretch range (60 %), high sensitivity (up to 385.285), and good durability (200 stretches/releases at 20 % stretch), which may be considered a remarkable achievement in the field of flexible sensor manufacturing for multiple applications.

Simultaneous removal of ammonium, phosphate, and phenol via self-assembled biochar composites CBCZrOFe3O4 and its utilization as soil acidity amelioration

ABSTRACT High concentrations of ammonium, phosphate, and phenol are recognized as water pollutants that contribute to the degradation of soil acidity. In contrast, small quantities of these nutrients are essential for soil nutrient cycling and plant growth. Here, we reported composite materials comprising biochar, chitosan, ZrO, and Fe3O4, which were employed to mitigate ammonium, phosphate, and phenol contamination in water and to lessen soil acidity. Batch adsorption experiments were conducted to assess the efficacy of the adsorbents. Initially, comparative studies on the simultaneous removal of NH4, PO4, and phenol using CB (biochar), CBC (biochar + chitosan), CBCZrO (biochar + chitosan + ZrO), and CBCZrOFe3O4 (biochar + chitosan + ZrO + Fe3O4) were conducted. The results discovered that CBCZrOFe3O4 exhibited the highest removal percentage among the adsorbents (P < 0.05). Adsorption data for CBCZrOFe3O4 were well fitted to the second-order kinetic and Freundlich isotherm models, with maximum adsorption capacities of 112.65 mg/g for NH4, 94.68 mg/g for PO4 and 112.63 mg/g for phenol. Subsequently, the effect of CBCZrOFe3O4-loaded NH4, PO4, and phenol (CBCZrOFe3O4-APP) on soil acidity was studied over a 60-day incubation period. The findings showed no significant changes (P < 0.05) in soil exchangeable acidity, H+, Mg, K, and Na. However, there was a substantial increase in the soil pH, EC, available P, CEC, N-NH4, and N-NO3. A significant reduction was also observed in the available soil exchangeable Al and Fe (P < 0.05). This technique demonstrated multi-functionality in remediating water pollutants and enhancing soil acidity.

Room temperature NH3 gas sensor based on In(OH)3/Ti3C2Tx nanocomposites.

Industrialization and agricultural demand have both improved human life and led to environmental contamination. Especially thedischarge of a lot of poisonous and harmful gases, including ammonia, ammonia pollution has become a pressing problem. High concentrations of ammonia can pose significant threats to both the environment and human health. Therefore, accurate monitoring and detection of ammonia gas are crucial. To address this challenge, we have developed an ammonia gas sensor using In(OH)3/Ti3C2Tx nanocomposites through an in-situ electrostatic self-assembly process. This sensor was thoroughly characterized using advanced techniques like XRD, XPS, BET, and TEM. In our tests, the I/M-2 sensor exhibited remarkable performance, achieving a 16.8% response to 100ppm NH3 at room temperature, which is a 3.5-fold improvement over the pure Ti3C2Tx MXene sensor. Moreover, it providesswift response time (20s), high response to low NH3concentrations (≤ 10ppm), and excellent long-term stability (30days). These exceptional characteristics indicate the immense potential of our In(OH)3/Ti3C2Tx gas sensor in ammonia detection.

Enhancing Rubber Industry Wastewater Treatment through an Integrated AnMBR and A/O MBR System: Performance, Membrane Fouling Analysis, and Microbial Community Evolution.

This study explores the effectiveness of an integrated anaerobic membrane bioreactor (AnMBR) coupled with an anoxic/oxic membrane bioreactor (A/O MBR) for the treatment of natural rubber industry wastewater with high sulfate, ammonia, and complex organic contents. This study was conducted at the lab-scale over a duration of 225 days to thoroughly investigate the efficiency and sustainability of the proposed treatment method. With a hydraulic retention time of 6 days for the total system, COD reductions were over 98%, which reduced the influent from 22,158 ± 2859 mg/L to 118 ± 74 mg/L of the effluent. The system demonstrates average NH3-N, TN, and total phosphorus (TP) removal efficiencies of 72.9 ± 5.7, 72.8 ± 5.6, and 71.3 ± 9.9, respectively. Despite an average whole biological system removal of 50.6%, the anaerobic reactor eliminated 44.9% of the raw WW sulfate. Analyses of membrane fouling revealed that organic fouling was more pronounced in the anaerobic membrane, whereas aerobic membrane fouling displayed varied profiles due to differential microbial and oxidative activities. Key bacterial genera, such as Desulfobacterota in the anaerobic stage and nitrifiers in the aerobic stage, are identified as instrumental in the biological processes. The microbial profile reveals a shift from methanogenesis to sulfide-driven autotrophic denitrification and sulfammox, with evidence of an active denitrification pathway in anaerobic/anoxic conditions. The system showcases its potential for industrial application, underpinning environmental sustainability through improved wastewater management.

Characteristics of late summer Arctic brash sea ice and its melting effect on the surface-water biogeochemistry of the Chukchi Shelf and Canada Basin

To understand the impact of the melting of late summer Arctic brash ice on the surface waters of the Chukchi Sea, we collected sea-ice samples during 2021. Floating sea ice was collected by a wire mesh pallet cage from the side of the R/V Mirai. We measured physical and biogeochemical parameters such as salinity, oxygen stable isotopic ratios, turbidity, and concentrations of chlorophyll-a and nutrients. The samples of brash ice were multiyear ice based on satellite back-trajectory analysis. Comparison of nutrient concentrations in brash ice with those of seawater samples from the temperature minimum layer similar to the water in the sea ice originated suggested that the characteristics of the brash ice were greatly affected by biogeochemical processes such as remineralization. The extremely high turbidity and concentrations of chlorophyll-a observed in the brown/green ice samples reflected the impact of sediment as well as the influence of biological activities. The N:P ratios were less than 1 because of the high phosphate concentrations, even though the ammonium concentrations were high. We hypothesized that this low N:P ratio reflected the combined effects of the accumulation of nutrients due to remineralization in the biofilm and differences of remineralization rate and adsorption features of nitrogen and phosphorus. Based on the high nitrate and ammonium concentrations in the sea-ice samples, we postulated a marked impact of sea-ice meltwater on the nitrogen cycle in the nitrate-depleted surface waters of the Chukchi Sea during late summer. We estimated that meltwater nitrogen could support 0.3%–2.6% of primary production in the northern Chukchi Sea. Our results suggest that high-turbidity ice will play an important role as a source of nutrients to the ocean during melting of sea ice, and understanding its distribution, amount, and geochemical characteristics is vital.

High Ammonia Nitrogen-Induced Reproductive Toxicity in Goldfish (Carassius auratus) Mature Ovary

Ammonia nitrogen is one of the major pollutants in aquaculture. However, the mechanism of ammonia stress on ovarian development and follicular atresia is unknown. In this study, goldfish (Carassius auratus) were exposed to different ammonia concentrations, including 0 (control, C) and 50 mg/L (high, H) for 48 hr at 21 ± 0.5°C. Histology of the ovarian tissue sections revealed that the high ammonia concentrations inhibited the maturation of oocytes, and induced broken and wrinkled radiation bands, follicular membranes, and the accumulation of rod-shaped yolk particles. From the transcriptome data, a total of 1,405 differentially expressed genes (DEGs) were detected between H and C groups. Most DEGs were highly enriched in low-density lipoprotein particle-mediated signaling, oxidative stress-induced premature senescence, and ovarian steroidogenesis pathway. Furthermore, a total of 19 genes were selected and determined by quantitative real-time polymerase chain reaction (qRT-PCR). The changes in oxidative stress and antioxidant activity indicated the excessive accumulation of reactive oxygen species (ROS) in ovarian tissue. The ovarian apoptosis was induced in the H group. The downregulation of genes involved in the ovarian steroidogenesis pathway indicated that ammonia nitrogen stress prevented the synthesis of sexual hormones. These results suggest that high-concentration ammonia stress induces ovarian damage in goldfish, affecting its antioxidant function, leading to excessive ROS accumulation, ovarian apoptosis, and hindered steroid synthesis, adversely affecting reproductive performance.

Pt/Al2O3@Ce/ZrO2-S bifunctional catalysts prepared by mechanically milling for selective catalytic oxidation of high-concentration ammonia.

The selective catalytic oxidation (SCO) is an effective method for removing slipped high-concentration ammonia from NH3-fueled engine exhaust gas. Herein a novel bifunctional catalyst was synthesized by mechanically mixing sulfated Ce/ZrO2 (Ce/ZrO2-S) with a small fraction of Pt/Al2O3 (Pt 0.1 wt.%) for SCO of NH3. As expected, the introduction of a small amount of Pt/Al2O3 significantly improved NH3 conversion ability of Ce/ZrO2-S catalysts toward low-temperature direction. When the mass ratio of Pt/Al2O3 to Ce/ZrO2-S was 7.5% (the corresponding mixed catalyst was denoted as P@CZS-7.5), T90 temperature was 312°C. More importantly, P@CZS-7.5 catalyst exhibited a much better N2 selectivity (> 96%) in a wide temperature range (320 ~ 450°C). H2-TPR results revealed that the addition of a trace amount of Pt/Al2O3 significantly led to a distinct shift of reduction temperature peak toward low-temperature direction, thereby greatly improved the low-temperature redox performance of mixed catalysts. Furthermore, NH3-TPD and BET results showed that P@CZS-7.5 catalyst exhibited a similar NH3 adsorption capacity to Ce/ZrO2-S catalyst, while the former had a relatively higher specific surface area than the latter. It was considered as a crucial factor for P@CZS-7.5 catalyst maintaining superior N2 selectivity in high-concentration NH3 (5000ppm) removal processes. In situ DRIFTS results indicated that P@CZS-7.5 catalyst followed the internal selective catalytic reduction (i-SCR) mechanism in NH3-SCO reactions.

A Higher Stomatal Aperture is Associated with the Growth Promotion of Centipedegrass (Eremochloa ophiuroides (Munro) Hack.) Under High Concentrations of Ammonium

A Higher Stomatal Aperture is Associated with the Growth Promotion of Centipedegrass (Eremochloa ophiuroides (Munro) Hack.) Under High Concentrations of Ammonium